All of lore.kernel.org
 help / color / mirror / Atom feed
From: <pkshih@realtek.com>
To: <kvalo@codeaurora.org>
Cc: <Larry.Finger@lwfinger.net>, <linux-wireless@vger.kernel.org>
Subject: [PATCH 11/14] rtlwifi: remove hal_op c2h_content_parsing
Date: Fri, 18 May 2018 17:30:04 +0800	[thread overview]
Message-ID: <20180518093007.23594-12-pkshih@realtek.com> (raw)
In-Reply-To: <20180518093007.23594-1-pkshih@realtek.com>

From: Ping-Ke Shih <pkshih@realtek.com>

Similar to rx_command_packet, we can call rtl_c2h_content_parsing so the
hal_op isn't necessary.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
---
 drivers/net/wireless/realtek/rtlwifi/base.c         | 7 +++----
 drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c | 1 -
 drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c | 1 -
 drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c | 1 -
 drivers/net/wireless/realtek/rtlwifi/wifi.h         | 2 --
 5 files changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c
index 0d03e98f9cb4..927b7d231576 100644
--- a/drivers/net/wireless/realtek/rtlwifi/base.c
+++ b/drivers/net/wireless/realtek/rtlwifi/base.c
@@ -2346,7 +2346,6 @@ void rtl_c2h_content_parsing(struct ieee80211_hw *hw, u8 cmd_id,
 		break;
 	}
 }
-EXPORT_SYMBOL_GPL(rtl_c2h_content_parsing);
 
 void rtl_c2h_packet_handler(struct ieee80211_hw *hw, u8 *buffer, u8 len)
 {
@@ -2401,9 +2400,9 @@ void rtl_c2hcmd_launcher(struct ieee80211_hw *hw, int exec)
 		if (!c2hcmd)
 			break;
 
-		if (rtlpriv->cfg->ops->c2h_content_parsing && exec)
-			rtlpriv->cfg->ops->c2h_content_parsing(hw,
-					c2hcmd->tag, c2hcmd->len, c2hcmd->val);
+		if (exec)
+			rtl_c2h_content_parsing(hw, c2hcmd->tag,
+						c2hcmd->len, c2hcmd->val);
 
 		/* free */
 		kfree(c2hcmd->val);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
index 5b67ad748d67..9ea62599ecbb 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/sw.c
@@ -250,7 +250,6 @@ static struct rtl_hal_ops rtl8192ee_hal_ops = {
 	.set_rfreg = rtl92ee_phy_set_rf_reg,
 	.fill_h2c_cmd = rtl92ee_fill_h2c_cmd,
 	.get_btc_status = rtl92ee_get_btc_status,
-	.c2h_content_parsing = rtl_c2h_content_parsing,
 	.c2h_ra_report_handler = rtl92ee_c2h_ra_report_handler,
 };
 
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
index a41e67b3f38b..c9f7b042d9c6 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/sw.c
@@ -262,7 +262,6 @@ static struct rtl_hal_ops rtl8723be_hal_ops = {
 	.fill_h2c_cmd = rtl8723be_fill_h2c_cmd,
 	.get_btc_status = rtl8723be_get_btc_status,
 	.is_fw_header = is_fw_header,
-	.c2h_content_parsing = rtl_c2h_content_parsing,
 };
 
 static struct rtl_mod_params rtl8723be_mod_params = {
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
index 8ff8a406db52..77f6401021c9 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/sw.c
@@ -303,7 +303,6 @@ static struct rtl_hal_ops rtl8821ae_hal_ops = {
 	.set_rfreg = rtl8821ae_phy_set_rf_reg,
 	.fill_h2c_cmd = rtl8821ae_fill_h2c_cmd,
 	.get_btc_status = rtl8821ae_get_btc_status,
-	.c2h_content_parsing = rtl_c2h_content_parsing,
 	.c2h_ra_report_handler = rtl8821ae_c2h_ra_report_handler,
 	.add_wowlan_pattern = rtl8821ae_add_wowlan_pattern,
 };
diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h
index b40d8f5bbdce..930e1ec2280f 100644
--- a/drivers/net/wireless/realtek/rtlwifi/wifi.h
+++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h
@@ -2344,8 +2344,6 @@ struct rtl_hal_ops {
 				   struct rtl_wow_pattern *rtl_pattern,
 				   u8 index);
 	u16 (*get_available_desc)(struct ieee80211_hw *hw, u8 q_idx);
-	void (*c2h_content_parsing)(struct ieee80211_hw *hw, u8 tag, u8 len,
-				    u8 *val);
 	void (*c2h_ra_report_handler)(struct ieee80211_hw *hw,
 				      u8 *cmd_buf, u8 cmd_len);
 };
-- 
2.15.1

  parent reply	other threads:[~2018-05-18  9:30 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18  9:29 [PATCH 00/14] rtlwifi: remove duplicate C2H handlers pkshih
2018-05-18  9:29 ` [PATCH 01/14] rtlwifi: support accurate nullfunc frame tx ack report pkshih
2018-05-29  7:18   ` [01/14] " Kalle Valo
2018-05-18  9:29 ` [PATCH 02/14] rtlwifi: remove CONNECTION_MONITOR flag pkshih
2018-05-18  9:29 ` [PATCH 03/14] rtlwifi: remove duplicate rx_packet_type definition pkshih
2018-05-18  9:29 ` [PATCH 04/14] rtlwifi: rename register-based C2H command IDs to V0 pkshih
2018-05-18  9:29 ` [PATCH 05/14] rtlwifi: remove duplicate C2H definition pkshih
2018-05-18  9:29 ` [PATCH 06/14] rtlwifi: remove unused fw C2H command ID pkshih
2018-05-18  9:30 ` [PATCH 07/14] rtlwifi: remove dummy hal_op rx_command_packet from rtl8188ee and rtl8723ae pkshih
2018-05-18  9:30 ` [PATCH 08/14] rtlwifi: Add hal_op c2h_ra_report_handler for special process pkshih
2018-05-18  9:30 ` [PATCH 09/14] rtlwifi: remove duplicate C2H handler pkshih
2018-05-18  9:30 ` [PATCH 10/14] rtlwifi: remove hal_op rx_command_packet pkshih
2018-05-18  9:30 ` pkshih [this message]
2018-05-18  9:30 ` [PATCH 12/14] rtlwifi: use sk_buff to queue C2H commands pkshih
2018-05-18  9:30 ` [PATCH 13/14] rtlwifi: access skb->data to get C2H data by macro pkshih
2018-05-29  5:18   ` Kalle Valo
2018-05-31  2:13     ` Pkshih
2018-06-29  7:30       ` Kalle Valo
2018-07-03  6:03         ` Pkshih
2018-07-03  6:14           ` Kalle Valo
2018-07-03  8:32             ` Felix Fietkau
2018-07-03 10:57               ` Kalle Valo
2018-07-03 11:01                 ` Felix Fietkau
2018-07-03 15:28                 ` Larry Finger
2018-05-18  9:30 ` [PATCH 14/14] rtlwifi: fix btmpinfo timeout while processing C2H_BT_INFO pkshih

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180518093007.23594-12-pkshih@realtek.com \
    --to=pkshih@realtek.com \
    --cc=Larry.Finger@lwfinger.net \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.