All of lore.kernel.org
 help / color / mirror / Atom feed
From: Saeed Mahameed <saeedm@mellanox.com>
To: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org, Huy Nguyen <huyn@mellanox.com>,
	Saeed Mahameed <saeedm@mellanox.com>
Subject: [net-next 4/6] net/mlx5e: PPTB and PBMC register firmware command support
Date: Mon, 21 May 2018 14:05:00 -0700	[thread overview]
Message-ID: <20180521210502.11082-5-saeedm@mellanox.com> (raw)
In-Reply-To: <20180521210502.11082-1-saeedm@mellanox.com>

From: Huy Nguyen <huyn@mellanox.com>

Add firmware command interface to read and write PPTB and PBMC
registers.

PPTB register enables mappings priority to a specific receive buffer.

PBMC registers enables changing the receive buffer's configuration such
as buffer size, xon/xoff thresholds, buffer's lossy property and
buffer's shared property.

Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
---
 .../net/ethernet/mellanox/mlx5/core/en/port.c | 108 ++++++++++++++++++
 .../net/ethernet/mellanox/mlx5/core/en/port.h |   5 +
 include/linux/mlx5/driver.h                   |   2 +
 include/linux/mlx5/mlx5_ifc.h                 |  35 ++++++
 4 files changed, 150 insertions(+)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
index 9f04542f3661..24e3b564964f 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.c
@@ -127,3 +127,111 @@ u32 mlx5e_port_speed2linkmodes(u32 speed)
 
 	return link_modes;
 }
+
+int mlx5e_port_query_pbmc(struct mlx5_core_dev *mdev, void *out)
+{
+	int sz = MLX5_ST_SZ_BYTES(pbmc_reg);
+	void *in;
+	int err;
+
+	in = kzalloc(sz, GFP_KERNEL);
+	if (!in)
+		return -ENOMEM;
+
+	MLX5_SET(pbmc_reg, in, local_port, 1);
+	err = mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PBMC, 0, 0);
+
+	kfree(in);
+	return err;
+}
+
+int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in)
+{
+	int sz = MLX5_ST_SZ_BYTES(pbmc_reg);
+	void *out;
+	int err;
+
+	out = kzalloc(sz, GFP_KERNEL);
+	if (!out)
+		return -ENOMEM;
+
+	MLX5_SET(pbmc_reg, in, local_port, 1);
+	err = mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PBMC, 0, 1);
+
+	kfree(out);
+	return err;
+}
+
+/* buffer[i]: buffer that priority i mapped to */
+int mlx5e_port_query_priority2buffer(struct mlx5_core_dev *mdev, u8 *buffer)
+{
+	int sz = MLX5_ST_SZ_BYTES(pptb_reg);
+	u32 prio_x_buff;
+	void *out;
+	void *in;
+	int prio;
+	int err;
+
+	in = kzalloc(sz, GFP_KERNEL);
+	out = kzalloc(sz, GFP_KERNEL);
+	if (!in || !out) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	MLX5_SET(pptb_reg, in, local_port, 1);
+	err = mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPTB, 0, 0);
+	if (err)
+		goto out;
+
+	prio_x_buff = MLX5_GET(pptb_reg, out, prio_x_buff);
+	for (prio = 0; prio < 8; prio++) {
+		buffer[prio] = (u8)(prio_x_buff >> (4 * prio)) & 0xF;
+		mlx5_core_dbg(mdev, "prio %d, buffer %d\n", prio, buffer[prio]);
+	}
+out:
+	kfree(in);
+	kfree(out);
+	return err;
+}
+
+int mlx5e_port_set_priority2buffer(struct mlx5_core_dev *mdev, u8 *buffer)
+{
+	int sz = MLX5_ST_SZ_BYTES(pptb_reg);
+	u32 prio_x_buff;
+	void *out;
+	void *in;
+	int prio;
+	int err;
+
+	in = kzalloc(sz, GFP_KERNEL);
+	out = kzalloc(sz, GFP_KERNEL);
+	if (!in || !out) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	/* First query the pptb register */
+	MLX5_SET(pptb_reg, in, local_port, 1);
+	err = mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPTB, 0, 0);
+	if (err)
+		goto out;
+
+	memcpy(in, out, sz);
+	MLX5_SET(pptb_reg, in, local_port, 1);
+
+	/* Update the pm and prio_x_buff */
+	MLX5_SET(pptb_reg, in, pm, 0xFF);
+
+	prio_x_buff = 0;
+	for (prio = 0; prio < 8; prio++)
+		prio_x_buff |= (buffer[prio] << (4 * prio));
+	MLX5_SET(pptb_reg, in, prio_x_buff, prio_x_buff);
+
+	err = mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPTB, 0, 1);
+
+out:
+	kfree(in);
+	kfree(out);
+	return err;
+}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
index 7aae38e98a65..f8cbd8194179 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/port.h
@@ -40,4 +40,9 @@ u32 mlx5e_port_ptys2speed(u32 eth_proto_oper);
 int mlx5e_port_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
 int mlx5e_port_max_linkspeed(struct mlx5_core_dev *mdev, u32 *speed);
 u32 mlx5e_port_speed2linkmodes(u32 speed);
+
+int mlx5e_port_query_pbmc(struct mlx5_core_dev *mdev, void *out);
+int mlx5e_port_set_pbmc(struct mlx5_core_dev *mdev, void *in);
+int mlx5e_port_query_priority2buffer(struct mlx5_core_dev *mdev, u8 *buffer);
+int mlx5e_port_set_priority2buffer(struct mlx5_core_dev *mdev, u8 *buffer);
 #endif
diff --git a/include/linux/mlx5/driver.h b/include/linux/mlx5/driver.h
index 2a156c5dfadd..395fc1a9e378 100644
--- a/include/linux/mlx5/driver.h
+++ b/include/linux/mlx5/driver.h
@@ -124,6 +124,8 @@ enum {
 	MLX5_REG_PAOS		 = 0x5006,
 	MLX5_REG_PFCC            = 0x5007,
 	MLX5_REG_PPCNT		 = 0x5008,
+	MLX5_REG_PPTB            = 0x500b,
+	MLX5_REG_PBMC            = 0x500c,
 	MLX5_REG_PMAOS		 = 0x5012,
 	MLX5_REG_PUDE		 = 0x5009,
 	MLX5_REG_PMPE		 = 0x5010,
diff --git a/include/linux/mlx5/mlx5_ifc.h b/include/linux/mlx5/mlx5_ifc.h
index f687989d336b..edbddeaacc88 100644
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -8788,6 +8788,41 @@ struct mlx5_ifc_qpts_reg_bits {
 	u8         trust_state[0x3];
 };
 
+struct mlx5_ifc_pptb_reg_bits {
+	u8         reserved_at_0[0x2];
+	u8         mm[0x2];
+	u8         reserved_at_4[0x4];
+	u8         local_port[0x8];
+	u8         reserved_at_10[0x6];
+	u8         cm[0x1];
+	u8         um[0x1];
+	u8         pm[0x8];
+
+	u8         prio_x_buff[0x20];
+
+	u8         pm_msb[0x8];
+	u8         reserved_at_48[0x10];
+	u8         ctrl_buff[0x4];
+	u8         untagged_buff[0x4];
+};
+
+struct mlx5_ifc_pbmc_reg_bits {
+	u8         reserved_at_0[0x8];
+	u8         local_port[0x8];
+	u8         reserved_at_10[0x10];
+
+	u8         xoff_timer_value[0x10];
+	u8         xoff_refresh[0x10];
+
+	u8         reserved_at_40[0x9];
+	u8         fullness_threshold[0x7];
+	u8         port_buffer_size[0x10];
+
+	struct mlx5_ifc_bufferx_reg_bits buffer[10];
+
+	u8         reserved_at_2e0[0x40];
+};
+
 struct mlx5_ifc_qtct_reg_bits {
 	u8         reserved_at_0[0x8];
 	u8         port_number[0x8];
-- 
2.17.0

  parent reply	other threads:[~2018-05-21 21:27 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-21 21:04 [pull request][net-next 0/6] Mellanox, mlx5e updates 2018-05-19 Saeed Mahameed
2018-05-21 21:04 ` [net-next 1/6] net/dcb: Add dcbnl buffer attribute Saeed Mahameed
2018-05-22  5:20   ` Jakub Kicinski
2018-05-22 15:36     ` Huy Nguyen
2018-05-22 18:32       ` Jakub Kicinski
2018-05-23  1:01         ` Huy Nguyen
2018-05-23  6:15           ` Or Gerlitz
2018-05-23  9:23           ` Jakub Kicinski
2018-05-23  9:33             ` Jiri Pirko
2018-05-23 15:08             ` Huy Nguyen
2018-05-23 15:27             ` Huy Nguyen
2018-05-24 17:13             ` Ido Schimmel
2018-05-23  9:43     ` Jiri Pirko
2018-05-23 13:52       ` John Fastabend
2018-05-23 15:37         ` Huy Nguyen
2018-05-23 16:03           ` John Fastabend
2018-05-23 20:28             ` Jakub Kicinski
2018-05-24 14:37             ` Huy Nguyen
2018-05-23 20:13         ` Jakub Kicinski
2018-05-23 20:19   ` Jakub Kicinski
2018-05-24 14:11     ` Huy Nguyen
2018-05-21 21:04 ` [net-next 2/6] net/mlx5: Add pbmc and pptb in the port_access_reg_cap_mask Saeed Mahameed
2018-05-22 10:19   ` Or Gerlitz
2018-05-22 10:21     ` Or Gerlitz
2018-05-22 16:01       ` Saeed Mahameed
2018-05-24 21:21         ` Or Gerlitz
2018-05-24 21:28           ` Saeed Mahameed
2018-05-21 21:04 ` [net-next 3/6] net/mlx5e: Move port speed code from en_ethtool.c to en/port.c Saeed Mahameed
2018-05-21 21:05 ` Saeed Mahameed [this message]
2018-05-21 21:05 ` [net-next 5/6] net/mlx5e: Receive buffer configuration Saeed Mahameed
2018-05-21 21:05 ` [net-next 6/6] net/mlx5e: Receive buffer support for DCBX Saeed Mahameed
2018-05-22 19:38 ` [pull request][net-next 0/6] Mellanox, mlx5e updates 2018-05-19 David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180521210502.11082-5-saeedm@mellanox.com \
    --to=saeedm@mellanox.com \
    --cc=davem@davemloft.net \
    --cc=huyn@mellanox.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.