[RFC] switch mips to use the generic dma map ops

[RFC] switch mips to use the generic dma map ops

[Christoph Hellwig]

Hi all,

this huge series does a deep cleaning of the mips dma mapping code and
moves most architectures over to use the generic dma_direct_ops or
dma_noncoherent_ops.  The Jazz architectures grows a new dma_map_ops
tailered to its bare bones iommu implementation, and the swiotlb code
use by Loongson-3 and Octeon is merged into a single implementation,
pending further unification with the generic swiotlb_ops in another
step.

Note that all this has been compile tested only, and I've probably
missed even that for some platforms..

A git tree is available here:

    git://git.infradead.org/users/hch/misc.git mips-direct-ops

Gitweb:

    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/mips-direct-ops

[RFC] switch mips to use the generic dma map ops

[Christoph Hellwig]

Hi all,

this huge series does a deep cleaning of the mips dma mapping code and
moves most architectures over to use the generic dma_direct_ops or
dma_noncoherent_ops.  The Jazz architectures grows a new dma_map_ops
tailered to its bare bones iommu implementation, and the swiotlb code
use by Loongson-3 and Octeon is merged into a single implementation,
pending further unification with the generic swiotlb_ops in another
step.

Note that all this has been compile tested only, and I've probably
missed even that for some platforms..

A git tree is available here:

    git://git.infradead.org/users/hch/misc.git mips-direct-ops

Gitweb:

    http://git.infradead.org/users/hch/misc.git/shortlog/refs/heads/mips-direct-ops

[PATCH 01/25] MIPS: remove a dead ifdef from mach-ath25/dma-coherence.h

[Christoph Hellwig]

ath25 is alwas non-coherent, so keeping these ifdefs doesn't make any sense.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/include/asm/mach-ath25/dma-coherence.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/mips/include/asm/mach-ath25/dma-coherence.h b/arch/mips/include/asm/mach-ath25/dma-coherence.h
index d5defdde32db..124755d4f079 100644
--- a/arch/mips/include/asm/mach-ath25/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ath25/dma-coherence.h
@@ -61,12 +61,7 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
-#ifdef CONFIG_DMA_COHERENT
-	return 1;
-#endif
-#ifdef CONFIG_DMA_NONCOHERENT
 	return 0;
-#endif
 }
 
 static inline void plat_post_dma_flush(struct device *dev)
-- 
2.17.0

[PATCH 01/25] MIPS: remove a dead ifdef from mach-ath25/dma-coherence.h

[Christoph Hellwig]

ath25 is alwas non-coherent, so keeping these ifdefs doesn't make any sense.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/include/asm/mach-ath25/dma-coherence.h | 5 -----
 1 file changed, 5 deletions(-)

diff --git a/arch/mips/include/asm/mach-ath25/dma-coherence.h b/arch/mips/include/asm/mach-ath25/dma-coherence.h
index d5defdde32db..124755d4f079 100644
--- a/arch/mips/include/asm/mach-ath25/dma-coherence.h
+++ b/arch/mips/include/asm/mach-ath25/dma-coherence.h
@@ -61,12 +61,7 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
-#ifdef CONFIG_DMA_COHERENT
-	return 1;
-#endif
-#ifdef CONFIG_DMA_NONCOHERENT
 	return 0;
-#endif
 }
 
 static inline void plat_post_dma_flush(struct device *dev)
-- 
2.17.0

[PATCH 02/25] MIPS: simplify CONFIG_DMA_NONCOHERENT ifdefs

[Christoph Hellwig]

CONFIG_DMA_MAYBE_COHERENT already selects CONFIG_DMA_NONCOHERENT, so we
can remove the extra conditions.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/include/asm/io.h | 4 ++--
 arch/mips/mm/c-r4k.c       | 4 ++--
 arch/mips/mm/cache.c       | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index a7d0b836f2f7..6d6bdc6a48eb 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -588,7 +588,7 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
  *
  * This API used to be exported; it now is for arch code internal use only.
  */
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
@@ -607,7 +607,7 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define dma_cache_inv(start,size)	\
 	do { (void) (start); (void) (size); } while (0)
 
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 /*
  * Read a 32-bit register that requires a 64-bit read cycle on the bus.
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6f534b209971..dcfff4f6cd88 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -830,7 +830,7 @@ static void r4k_flush_icache_user_range(unsigned long start, unsigned long end)
 	return __r4k_flush_icache_range(start, end, true);
 }
 
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
@@ -901,7 +901,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	bc_inv(addr, size);
 	__sync();
 }
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 struct flush_cache_sigtramp_args {
 	struct mm_struct *mm;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 0d3c656feba0..70a523151ff3 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -56,7 +56,7 @@ EXPORT_SYMBOL_GPL(local_flush_data_cache_page);
 EXPORT_SYMBOL(flush_data_cache_page);
 EXPORT_SYMBOL(flush_icache_all);
 
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 /* DMA cache operations. */
 void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
@@ -65,7 +65,7 @@ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 
 EXPORT_SYMBOL(_dma_cache_wback_inv);
 
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 /*
  * We could optimize the case where the cache argument is not BCACHE but
-- 
2.17.0

[PATCH 02/25] MIPS: simplify CONFIG_DMA_NONCOHERENT ifdefs

[Christoph Hellwig]

CONFIG_DMA_MAYBE_COHERENT already selects CONFIG_DMA_NONCOHERENT, so we
can remove the extra conditions.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/include/asm/io.h | 4 ++--
 arch/mips/mm/c-r4k.c       | 4 ++--
 arch/mips/mm/cache.c       | 4 ++--
 3 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index a7d0b836f2f7..6d6bdc6a48eb 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -588,7 +588,7 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
  *
  * This API used to be exported; it now is for arch code internal use only.
  */
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 extern void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
 extern void (*_dma_cache_wback)(unsigned long start, unsigned long size);
@@ -607,7 +607,7 @@ extern void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 #define dma_cache_inv(start,size)	\
 	do { (void) (start); (void) (size); } while (0)
 
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 /*
  * Read a 32-bit register that requires a 64-bit read cycle on the bus.
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 6f534b209971..dcfff4f6cd88 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -830,7 +830,7 @@ static void r4k_flush_icache_user_range(unsigned long start, unsigned long end)
 	return __r4k_flush_icache_range(start, end, true);
 }
 
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 static void r4k_dma_cache_wback_inv(unsigned long addr, unsigned long size)
 {
@@ -901,7 +901,7 @@ static void r4k_dma_cache_inv(unsigned long addr, unsigned long size)
 	bc_inv(addr, size);
 	__sync();
 }
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 struct flush_cache_sigtramp_args {
 	struct mm_struct *mm;
diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c
index 0d3c656feba0..70a523151ff3 100644
--- a/arch/mips/mm/cache.c
+++ b/arch/mips/mm/cache.c
@@ -56,7 +56,7 @@ EXPORT_SYMBOL_GPL(local_flush_data_cache_page);
 EXPORT_SYMBOL(flush_data_cache_page);
 EXPORT_SYMBOL(flush_icache_all);
 
-#if defined(CONFIG_DMA_NONCOHERENT) || defined(CONFIG_DMA_MAYBE_COHERENT)
+#ifdef CONFIG_DMA_NONCOHERENT
 
 /* DMA cache operations. */
 void (*_dma_cache_wback_inv)(unsigned long start, unsigned long size);
@@ -65,7 +65,7 @@ void (*_dma_cache_inv)(unsigned long start, unsigned long size);
 
 EXPORT_SYMBOL(_dma_cache_wback_inv);
 
-#endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */
+#endif /* CONFIG_DMA_NONCOHERENT */
 
 /*
  * We could optimize the case where the cache argument is not BCACHE but
-- 
2.17.0

[PATCH 03/25] MIPS: remove CONFIG_DMA_COHERENT

[Christoph Hellwig]

We can just check for !CONFIG_DMA_NONCOHERENT instead and simplify things
a lot.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                            | 16 ----------------
 arch/mips/include/asm/dma-coherence.h        |  6 +++---
 arch/mips/include/asm/mach-generic/kmalloc.h |  3 +--
 arch/mips/mti-malta/malta-setup.c            |  4 ++--
 arch/mips/sibyte/Kconfig                     |  1 -
 5 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2dcdc13cd65d..43bb037301f6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -660,7 +660,6 @@ config SGI_IP27
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
-	select DMA_COHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
@@ -737,7 +736,6 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -747,7 +745,6 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -757,7 +754,6 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -768,7 +764,6 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -778,7 +773,6 @@ config SIBYTE_RHONE
 config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -791,7 +785,6 @@ config SIBYTE_SWARM
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -803,7 +796,6 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -813,7 +805,6 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -890,7 +881,6 @@ config CAVIUM_OCTEON_SOC
 	select CEVT_R4K
 	select ARCH_HAS_PHYS_TO_DMA
 	select PHYS_ADDR_T_64BIT
-	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select EDAC_SUPPORT
@@ -939,7 +929,6 @@ config NLM_XLR_BOARD
 	select PHYS_ADDR_T_64BIT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -967,7 +956,6 @@ config NLM_XLP_BOARD
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -986,7 +974,6 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
-	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1112,9 +1099,6 @@ config DMA_PERDEV_COHERENT
 	bool
 	select DMA_MAYBE_COHERENT
 
-config DMA_COHERENT
-	bool
-
 config DMA_NONCOHERENT
 	bool
 	select NEED_DMA_MAP_STATE
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index 72d0eab02afc..8eda48748ed5 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -21,10 +21,10 @@ enum coherent_io_user_state {
 extern enum coherent_io_user_state coherentio;
 extern int hw_coherentio;
 #else
-#ifdef CONFIG_DMA_COHERENT
-#define coherentio	IO_COHERENCE_ENABLED
-#else
+#ifdef CONFIG_DMA_NONCOHERENT
 #define coherentio	IO_COHERENCE_DISABLED
+#else
+#define coherentio	IO_COHERENCE_ENABLED
 #endif
 #define hw_coherentio	0
 #endif /* CONFIG_DMA_MAYBE_COHERENT */
diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h
index 74207c7bd00d..649a98338886 100644
--- a/arch/mips/include/asm/mach-generic/kmalloc.h
+++ b/arch/mips/include/asm/mach-generic/kmalloc.h
@@ -2,8 +2,7 @@
 #ifndef __ASM_MACH_GENERIC_KMALLOC_H
 #define __ASM_MACH_GENERIC_KMALLOC_H
 
-
-#ifndef CONFIG_DMA_COHERENT
+#ifdef CONFIG_DMA_NONCOHERENT
 /*
  * Total overkill for most systems but need as a safe default.
  * Set this one if any device in the system might do non-coherent DMA.
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 7b63914d2e58..4d5cdfeee3db 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -227,7 +227,7 @@ static void __init bonito_quirks_setup(void)
 	} else
 		BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
 
-#ifdef CONFIG_DMA_COHERENT
+#ifndef CONFIG_DMA_NONCOHERENT
 	if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
 		BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
 		pr_info("Enabled Bonito CPU coherency\n");
@@ -279,7 +279,7 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_DMA_COHERENT
+#ifndef CONFIG_DMA_NONCOHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");
 #endif
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index f4dbce25bc6a..7ec278d72096 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -70,7 +70,6 @@ config SIBYTE_BCM1x55
 
 config SIBYTE_SB1xxx_SOC
 	bool
-	select DMA_COHERENT
 	select IRQ_MIPS_CPU
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
-- 
2.17.0

[PATCH 03/25] MIPS: remove CONFIG_DMA_COHERENT

[Christoph Hellwig]

We can just check for !CONFIG_DMA_NONCOHERENT instead and simplify things
a lot.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                            | 16 ----------------
 arch/mips/include/asm/dma-coherence.h        |  6 +++---
 arch/mips/include/asm/mach-generic/kmalloc.h |  3 +--
 arch/mips/mti-malta/malta-setup.c            |  4 ++--
 arch/mips/sibyte/Kconfig                     |  1 -
 5 files changed, 6 insertions(+), 24 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 2dcdc13cd65d..43bb037301f6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -660,7 +660,6 @@ config SGI_IP27
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
-	select DMA_COHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
@@ -737,7 +736,6 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -747,7 +745,6 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -757,7 +754,6 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -768,7 +764,6 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -778,7 +773,6 @@ config SIBYTE_RHONE
 config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -791,7 +785,6 @@ config SIBYTE_SWARM
 config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select HAVE_PATA_PLATFORM
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
@@ -803,7 +796,6 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -813,7 +805,6 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -890,7 +881,6 @@ config CAVIUM_OCTEON_SOC
 	select CEVT_R4K
 	select ARCH_HAS_PHYS_TO_DMA
 	select PHYS_ADDR_T_64BIT
-	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select EDAC_SUPPORT
@@ -939,7 +929,6 @@ config NLM_XLR_BOARD
 	select PHYS_ADDR_T_64BIT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -967,7 +956,6 @@ config NLM_XLP_BOARD
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	select SYS_SUPPORTS_HIGHMEM
-	select DMA_COHERENT
 	select NR_CPUS_DEFAULT_32
 	select CEVT_R4K
 	select CSRC_R4K
@@ -986,7 +974,6 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
-	select DMA_COHERENT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -1112,9 +1099,6 @@ config DMA_PERDEV_COHERENT
 	bool
 	select DMA_MAYBE_COHERENT
 
-config DMA_COHERENT
-	bool
-
 config DMA_NONCOHERENT
 	bool
 	select NEED_DMA_MAP_STATE
diff --git a/arch/mips/include/asm/dma-coherence.h b/arch/mips/include/asm/dma-coherence.h
index 72d0eab02afc..8eda48748ed5 100644
--- a/arch/mips/include/asm/dma-coherence.h
+++ b/arch/mips/include/asm/dma-coherence.h
@@ -21,10 +21,10 @@ enum coherent_io_user_state {
 extern enum coherent_io_user_state coherentio;
 extern int hw_coherentio;
 #else
-#ifdef CONFIG_DMA_COHERENT
-#define coherentio	IO_COHERENCE_ENABLED
-#else
+#ifdef CONFIG_DMA_NONCOHERENT
 #define coherentio	IO_COHERENCE_DISABLED
+#else
+#define coherentio	IO_COHERENCE_ENABLED
 #endif
 #define hw_coherentio	0
 #endif /* CONFIG_DMA_MAYBE_COHERENT */
diff --git a/arch/mips/include/asm/mach-generic/kmalloc.h b/arch/mips/include/asm/mach-generic/kmalloc.h
index 74207c7bd00d..649a98338886 100644
--- a/arch/mips/include/asm/mach-generic/kmalloc.h
+++ b/arch/mips/include/asm/mach-generic/kmalloc.h
@@ -2,8 +2,7 @@
 #ifndef __ASM_MACH_GENERIC_KMALLOC_H
 #define __ASM_MACH_GENERIC_KMALLOC_H
 
-
-#ifndef CONFIG_DMA_COHERENT
+#ifdef CONFIG_DMA_NONCOHERENT
 /*
  * Total overkill for most systems but need as a safe default.
  * Set this one if any device in the system might do non-coherent DMA.
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 7b63914d2e58..4d5cdfeee3db 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -227,7 +227,7 @@ static void __init bonito_quirks_setup(void)
 	} else
 		BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE;
 
-#ifdef CONFIG_DMA_COHERENT
+#ifndef CONFIG_DMA_NONCOHERENT
 	if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) {
 		BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN;
 		pr_info("Enabled Bonito CPU coherency\n");
@@ -279,7 +279,7 @@ void __init plat_mem_setup(void)
 	 */
 	enable_dma(4);
 
-#ifdef CONFIG_DMA_COHERENT
+#ifndef CONFIG_DMA_NONCOHERENT
 	if (mips_revision_sconid != MIPS_REVISION_SCON_BONITO)
 		panic("Hardware DMA cache coherency not supported");
 #endif
diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig
index f4dbce25bc6a..7ec278d72096 100644
--- a/arch/mips/sibyte/Kconfig
+++ b/arch/mips/sibyte/Kconfig
@@ -70,7 +70,6 @@ config SIBYTE_BCM1x55
 
 config SIBYTE_SB1xxx_SOC
 	bool
-	select DMA_COHERENT
 	select IRQ_MIPS_CPU
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
-- 
2.17.0

[PATCH 04/25] MIPS: Octeon: unexport __phys_to_dma and __dma_to_phys

[Christoph Hellwig]

These functions are just low-level helpers for the swiotlb and dma-direct
implementations, and should never be used by drivers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/cavium-octeon/dma-octeon.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 7b335ab21697..e5d00c79bd26 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -13,7 +13,6 @@
 #include <linux/dma-direct.h>
 #include <linux/scatterlist.h>
 #include <linux/bootmem.h>
-#include <linux/export.h>
 #include <linux/swiotlb.h>
 #include <linux/types.h>
 #include <linux/init.h>
@@ -190,7 +189,6 @@ dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 
 	return ops->phys_to_dma(dev, paddr);
 }
-EXPORT_SYMBOL(__phys_to_dma);
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
@@ -200,7 +198,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 
 	return ops->dma_to_phys(dev, daddr);
 }
-EXPORT_SYMBOL(__dma_to_phys);
 
 static struct octeon_dma_map_ops octeon_linear_dma_map_ops = {
 	.dma_map_ops = {
-- 
2.17.0

[PATCH 04/25] MIPS: Octeon: unexport __phys_to_dma and __dma_to_phys

[Christoph Hellwig]

These functions are just low-level helpers for the swiotlb and dma-direct
implementations, and should never be used by drivers.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/cavium-octeon/dma-octeon.c | 3 ---
 1 file changed, 3 deletions(-)

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 7b335ab21697..e5d00c79bd26 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -13,7 +13,6 @@
 #include <linux/dma-direct.h>
 #include <linux/scatterlist.h>
 #include <linux/bootmem.h>
-#include <linux/export.h>
 #include <linux/swiotlb.h>
 #include <linux/types.h>
 #include <linux/init.h>
@@ -190,7 +189,6 @@ dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 
 	return ops->phys_to_dma(dev, paddr);
 }
-EXPORT_SYMBOL(__phys_to_dma);
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
@@ -200,7 +198,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 
 	return ops->dma_to_phys(dev, daddr);
 }
-EXPORT_SYMBOL(__dma_to_phys);
 
 static struct octeon_dma_map_ops octeon_linear_dma_map_ops = {
 	.dma_map_ops = {
-- 
2.17.0

[PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Christoph Hellwig]

Share a common set of swiotlb operations, and to instead branch out in
__phys_to_dma/__dma_to_phys for the PCI vs non-PCI case.  Also use const
structures for the PCI methods so that attackers can't use them as
exploit vectors.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/cavium-octeon/dma-octeon.c          | 169 ++++++++----------
 .../asm/mach-cavium-octeon/dma-coherence.h    |   2 -
 arch/mips/pci/pci-octeon.c                    |   2 -
 3 files changed, 70 insertions(+), 103 deletions(-)

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index e5d00c79bd26..1e68636c9137 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -23,10 +23,16 @@
 #include <asm/octeon/octeon.h>
 
 #ifdef CONFIG_PCI
+#include <linux/pci.h>
 #include <asm/octeon/pci-octeon.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
 
+struct octeon_dma_map_ops {
+	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
+	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
+};
+
 static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr)
 {
 	if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE))
@@ -43,6 +49,11 @@ static phys_addr_t octeon_hole_dma_to_phys(dma_addr_t daddr)
 		return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_gen2_ops = {
+	.phys_to_dma	= octeon_hole_phys_to_dma,
+	.dma_to_phys	= octeon_hole_dma_to_phys,
+};
+
 static dma_addr_t octeon_gen1_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
@@ -60,15 +71,10 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
-static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return octeon_hole_phys_to_dma(paddr);
-}
-
-static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
-	return octeon_hole_dma_to_phys(daddr);
-}
+static const struct octeon_dma_map_ops octeon_gen1_ops = {
+	.phys_to_dma	= octeon_gen1_phys_to_dma,
+	.dma_to_phys	= octeon_gen1_dma_to_phys,
+};
 
 static dma_addr_t octeon_big_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
@@ -92,6 +98,11 @@ static phys_addr_t octeon_big_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_big_ops = {
+	.phys_to_dma	= octeon_big_phys_to_dma,
+	.dma_to_phys	= octeon_big_dma_to_phys,
+};
+
 static dma_addr_t octeon_small_phys_to_dma(struct device *dev,
 					   phys_addr_t paddr)
 {
@@ -120,6 +131,32 @@ static phys_addr_t octeon_small_dma_to_phys(struct device *dev,
 	return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_small_ops = {
+	.phys_to_dma	= octeon_small_phys_to_dma,
+	.dma_to_phys	= octeon_small_dma_to_phys,
+};
+
+static const struct octeon_dma_map_ops *octeon_pci_dma_ops;
+
+void __init octeon_pci_dma_init(void)
+{
+	switch (octeon_dma_bar_type) {
+	case OCTEON_DMA_BAR_TYPE_PCIE2:
+		octeon_pci_dma_ops = &octeon_gen2_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_PCIE:
+		octeon_pci_dma_ops = &octeon_gen1_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_BIG:
+		octeon_pci_dma_ops = &octeon_big_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_SMALL:
+		octeon_pci_dma_ops = &octeon_small_ops;
+		break;
+	default:
+		BUG();
+	}
+}
 #endif /* CONFIG_PCI */
 
 static dma_addr_t octeon_dma_map_page(struct device *dev, struct page *page,
@@ -165,57 +202,37 @@ static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-static dma_addr_t octeon_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return paddr;
-}
-
-static phys_addr_t octeon_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
-	return daddr;
-}
-
-struct octeon_dma_map_ops {
-	const struct dma_map_ops dma_map_ops;
-	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
-	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
-};
-
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	struct octeon_dma_map_ops *ops = container_of(get_dma_ops(dev),
-						      struct octeon_dma_map_ops,
-						      dma_map_ops);
-
-	return ops->phys_to_dma(dev, paddr);
+#ifdef CONFIG_PCI
+	if (dev && dev_is_pci(dev))
+		return octeon_pci_dma_ops->phys_to_dma(dev, paddr);
+#endif
+	return paddr;
 }
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	struct octeon_dma_map_ops *ops = container_of(get_dma_ops(dev),
-						      struct octeon_dma_map_ops,
-						      dma_map_ops);
-
-	return ops->dma_to_phys(dev, daddr);
+#ifdef CONFIG_PCI
+	if (dev && dev_is_pci(dev))
+		return octeon_pci_dma_ops->dma_to_phys(dev, daddr);
+#endif
+	return daddr;
 }
 
-static struct octeon_dma_map_ops octeon_linear_dma_map_ops = {
-	.dma_map_ops = {
-		.alloc = octeon_dma_alloc_coherent,
-		.free = swiotlb_free,
-		.map_page = octeon_dma_map_page,
-		.unmap_page = swiotlb_unmap_page,
-		.map_sg = octeon_dma_map_sg,
-		.unmap_sg = swiotlb_unmap_sg_attrs,
-		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-		.sync_single_for_device = octeon_dma_sync_single_for_device,
-		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-		.sync_sg_for_device = octeon_dma_sync_sg_for_device,
-		.mapping_error = swiotlb_dma_mapping_error,
-		.dma_supported = swiotlb_dma_supported
-	},
-	.phys_to_dma = octeon_unity_phys_to_dma,
-	.dma_to_phys = octeon_unity_dma_to_phys
+static const struct dma_map_ops octeon_swiotlb_ops = {
+	.alloc			= octeon_dma_alloc_coherent,
+	.free			= swiotlb_free,
+	.map_page		= octeon_dma_map_page,
+	.unmap_page		= swiotlb_unmap_page,
+	.map_sg			= octeon_dma_map_sg,
+	.unmap_sg		= swiotlb_unmap_sg_attrs,
+	.sync_single_for_cpu	= swiotlb_sync_single_for_cpu,
+	.sync_single_for_device	= octeon_dma_sync_single_for_device,
+	.sync_sg_for_cpu	= swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device	= octeon_dma_sync_sg_for_device,
+	.mapping_error		= swiotlb_dma_mapping_error,
+	.dma_supported		= swiotlb_dma_supported
 };
 
 char *octeon_swiotlb;
@@ -281,51 +298,5 @@ void __init plat_swiotlb_setup(void)
 	if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM)
 		panic("Cannot allocate SWIOTLB buffer");
 
-	mips_dma_map_ops = &octeon_linear_dma_map_ops.dma_map_ops;
-}
-
-#ifdef CONFIG_PCI
-static struct octeon_dma_map_ops _octeon_pci_dma_map_ops = {
-	.dma_map_ops = {
-		.alloc = octeon_dma_alloc_coherent,
-		.free = swiotlb_free,
-		.map_page = octeon_dma_map_page,
-		.unmap_page = swiotlb_unmap_page,
-		.map_sg = octeon_dma_map_sg,
-		.unmap_sg = swiotlb_unmap_sg_attrs,
-		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-		.sync_single_for_device = octeon_dma_sync_single_for_device,
-		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-		.sync_sg_for_device = octeon_dma_sync_sg_for_device,
-		.mapping_error = swiotlb_dma_mapping_error,
-		.dma_supported = swiotlb_dma_supported
-	},
-};
-
-const struct dma_map_ops *octeon_pci_dma_map_ops;
-
-void __init octeon_pci_dma_init(void)
-{
-	switch (octeon_dma_bar_type) {
-	case OCTEON_DMA_BAR_TYPE_PCIE2:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen2_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen2_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_PCIE:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen1_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen1_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_BIG:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_big_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_big_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_SMALL:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_small_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_small_dma_to_phys;
-		break;
-	default:
-		BUG();
-	}
-	octeon_pci_dma_map_ops = &_octeon_pci_dma_map_ops.dma_map_ops;
+	mips_dma_map_ops = &octeon_swiotlb_ops;
 }
-#endif /* CONFIG_PCI */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index 6eb1ee548b11..c5cdeea495f8 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -72,8 +72,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
 
-struct dma_map_ops;
-extern const struct dma_map_ops *octeon_pci_dma_map_ops;
 extern char *octeon_swiotlb;
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 3e92a06fa772..a20697df3539 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -166,8 +166,6 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
 	}
 
-	dev->dev.dma_ops = octeon_pci_dma_map_ops;
-
 	return 0;
 }
 
-- 
2.17.0

[PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Christoph Hellwig]

Share a common set of swiotlb operations, and to instead branch out in
__phys_to_dma/__dma_to_phys for the PCI vs non-PCI case.  Also use const
structures for the PCI methods so that attackers can't use them as
exploit vectors.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/cavium-octeon/dma-octeon.c          | 169 ++++++++----------
 .../asm/mach-cavium-octeon/dma-coherence.h    |   2 -
 arch/mips/pci/pci-octeon.c                    |   2 -
 3 files changed, 70 insertions(+), 103 deletions(-)

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index e5d00c79bd26..1e68636c9137 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -23,10 +23,16 @@
 #include <asm/octeon/octeon.h>
 
 #ifdef CONFIG_PCI
+#include <linux/pci.h>
 #include <asm/octeon/pci-octeon.h>
 #include <asm/octeon/cvmx-npi-defs.h>
 #include <asm/octeon/cvmx-pci-defs.h>
 
+struct octeon_dma_map_ops {
+	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
+	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
+};
+
 static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr)
 {
 	if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE))
@@ -43,6 +49,11 @@ static phys_addr_t octeon_hole_dma_to_phys(dma_addr_t daddr)
 		return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_gen2_ops = {
+	.phys_to_dma	= octeon_hole_phys_to_dma,
+	.dma_to_phys	= octeon_hole_dma_to_phys,
+};
+
 static dma_addr_t octeon_gen1_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
@@ -60,15 +71,10 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
-static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return octeon_hole_phys_to_dma(paddr);
-}
-
-static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
-	return octeon_hole_dma_to_phys(daddr);
-}
+static const struct octeon_dma_map_ops octeon_gen1_ops = {
+	.phys_to_dma	= octeon_gen1_phys_to_dma,
+	.dma_to_phys	= octeon_gen1_dma_to_phys,
+};
 
 static dma_addr_t octeon_big_phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
@@ -92,6 +98,11 @@ static phys_addr_t octeon_big_dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_big_ops = {
+	.phys_to_dma	= octeon_big_phys_to_dma,
+	.dma_to_phys	= octeon_big_dma_to_phys,
+};
+
 static dma_addr_t octeon_small_phys_to_dma(struct device *dev,
 					   phys_addr_t paddr)
 {
@@ -120,6 +131,32 @@ static phys_addr_t octeon_small_dma_to_phys(struct device *dev,
 	return daddr;
 }
 
+static const struct octeon_dma_map_ops octeon_small_ops = {
+	.phys_to_dma	= octeon_small_phys_to_dma,
+	.dma_to_phys	= octeon_small_dma_to_phys,
+};
+
+static const struct octeon_dma_map_ops *octeon_pci_dma_ops;
+
+void __init octeon_pci_dma_init(void)
+{
+	switch (octeon_dma_bar_type) {
+	case OCTEON_DMA_BAR_TYPE_PCIE2:
+		octeon_pci_dma_ops = &octeon_gen2_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_PCIE:
+		octeon_pci_dma_ops = &octeon_gen1_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_BIG:
+		octeon_pci_dma_ops = &octeon_big_ops;
+		break;
+	case OCTEON_DMA_BAR_TYPE_SMALL:
+		octeon_pci_dma_ops = &octeon_small_ops;
+		break;
+	default:
+		BUG();
+	}
+}
 #endif /* CONFIG_PCI */
 
 static dma_addr_t octeon_dma_map_page(struct device *dev, struct page *page,
@@ -165,57 +202,37 @@ static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
 	return ret;
 }
 
-static dma_addr_t octeon_unity_phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
-	return paddr;
-}
-
-static phys_addr_t octeon_unity_dma_to_phys(struct device *dev, dma_addr_t daddr)
-{
-	return daddr;
-}
-
-struct octeon_dma_map_ops {
-	const struct dma_map_ops dma_map_ops;
-	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
-	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
-};
-
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	struct octeon_dma_map_ops *ops = container_of(get_dma_ops(dev),
-						      struct octeon_dma_map_ops,
-						      dma_map_ops);
-
-	return ops->phys_to_dma(dev, paddr);
+#ifdef CONFIG_PCI
+	if (dev && dev_is_pci(dev))
+		return octeon_pci_dma_ops->phys_to_dma(dev, paddr);
+#endif
+	return paddr;
 }
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	struct octeon_dma_map_ops *ops = container_of(get_dma_ops(dev),
-						      struct octeon_dma_map_ops,
-						      dma_map_ops);
-
-	return ops->dma_to_phys(dev, daddr);
+#ifdef CONFIG_PCI
+	if (dev && dev_is_pci(dev))
+		return octeon_pci_dma_ops->dma_to_phys(dev, daddr);
+#endif
+	return daddr;
 }
 
-static struct octeon_dma_map_ops octeon_linear_dma_map_ops = {
-	.dma_map_ops = {
-		.alloc = octeon_dma_alloc_coherent,
-		.free = swiotlb_free,
-		.map_page = octeon_dma_map_page,
-		.unmap_page = swiotlb_unmap_page,
-		.map_sg = octeon_dma_map_sg,
-		.unmap_sg = swiotlb_unmap_sg_attrs,
-		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-		.sync_single_for_device = octeon_dma_sync_single_for_device,
-		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-		.sync_sg_for_device = octeon_dma_sync_sg_for_device,
-		.mapping_error = swiotlb_dma_mapping_error,
-		.dma_supported = swiotlb_dma_supported
-	},
-	.phys_to_dma = octeon_unity_phys_to_dma,
-	.dma_to_phys = octeon_unity_dma_to_phys
+static const struct dma_map_ops octeon_swiotlb_ops = {
+	.alloc			= octeon_dma_alloc_coherent,
+	.free			= swiotlb_free,
+	.map_page		= octeon_dma_map_page,
+	.unmap_page		= swiotlb_unmap_page,
+	.map_sg			= octeon_dma_map_sg,
+	.unmap_sg		= swiotlb_unmap_sg_attrs,
+	.sync_single_for_cpu	= swiotlb_sync_single_for_cpu,
+	.sync_single_for_device	= octeon_dma_sync_single_for_device,
+	.sync_sg_for_cpu	= swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device	= octeon_dma_sync_sg_for_device,
+	.mapping_error		= swiotlb_dma_mapping_error,
+	.dma_supported		= swiotlb_dma_supported
 };
 
 char *octeon_swiotlb;
@@ -281,51 +298,5 @@ void __init plat_swiotlb_setup(void)
 	if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM)
 		panic("Cannot allocate SWIOTLB buffer");
 
-	mips_dma_map_ops = &octeon_linear_dma_map_ops.dma_map_ops;
-}
-
-#ifdef CONFIG_PCI
-static struct octeon_dma_map_ops _octeon_pci_dma_map_ops = {
-	.dma_map_ops = {
-		.alloc = octeon_dma_alloc_coherent,
-		.free = swiotlb_free,
-		.map_page = octeon_dma_map_page,
-		.unmap_page = swiotlb_unmap_page,
-		.map_sg = octeon_dma_map_sg,
-		.unmap_sg = swiotlb_unmap_sg_attrs,
-		.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-		.sync_single_for_device = octeon_dma_sync_single_for_device,
-		.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-		.sync_sg_for_device = octeon_dma_sync_sg_for_device,
-		.mapping_error = swiotlb_dma_mapping_error,
-		.dma_supported = swiotlb_dma_supported
-	},
-};
-
-const struct dma_map_ops *octeon_pci_dma_map_ops;
-
-void __init octeon_pci_dma_init(void)
-{
-	switch (octeon_dma_bar_type) {
-	case OCTEON_DMA_BAR_TYPE_PCIE2:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen2_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen2_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_PCIE:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_gen1_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_gen1_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_BIG:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_big_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_big_dma_to_phys;
-		break;
-	case OCTEON_DMA_BAR_TYPE_SMALL:
-		_octeon_pci_dma_map_ops.phys_to_dma = octeon_small_phys_to_dma;
-		_octeon_pci_dma_map_ops.dma_to_phys = octeon_small_dma_to_phys;
-		break;
-	default:
-		BUG();
-	}
-	octeon_pci_dma_map_ops = &_octeon_pci_dma_map_ops.dma_map_ops;
+	mips_dma_map_ops = &octeon_swiotlb_ops;
 }
-#endif /* CONFIG_PCI */
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index 6eb1ee548b11..c5cdeea495f8 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -72,8 +72,6 @@ static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
 
-struct dma_map_ops;
-extern const struct dma_map_ops *octeon_pci_dma_map_ops;
 extern char *octeon_swiotlb;
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index 3e92a06fa772..a20697df3539 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -166,8 +166,6 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 		pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig);
 	}
 
-	dev->dev.dma_ops = octeon_pci_dma_map_ops;
-
 	return 0;
 }
 
-- 
2.17.0

[PATCH 06/25] MIPS: loongson: remove loongson_dma_supported

[Christoph Hellwig]

swiotlb_dma_supported will always return true for the a mask
large enough to be covered by wired up physical address, so this
function is pointless.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/loongson64/common/dma-swiotlb.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
index 6a739f8ae110..a5e50f2ec301 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/common/dma-swiotlb.c
@@ -56,13 +56,6 @@ static void loongson_dma_sync_sg_for_device(struct device *dev,
 	mb();
 }
 
-static int loongson_dma_supported(struct device *dev, u64 mask)
-{
-	if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits))
-		return 0;
-	return swiotlb_dma_supported(dev, mask);
-}
-
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	long nid;
@@ -99,7 +92,7 @@ static const struct dma_map_ops loongson_dma_map_ops = {
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
 	.mapping_error = swiotlb_dma_mapping_error,
-	.dma_supported = loongson_dma_supported,
+	.dma_supported = swiotlb_dma_supported,
 };
 
 void __init plat_swiotlb_setup(void)
-- 
2.17.0

[PATCH 06/25] MIPS: loongson: remove loongson_dma_supported

[Christoph Hellwig]

swiotlb_dma_supported will always return true for the a mask
large enough to be covered by wired up physical address, so this
function is pointless.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/loongson64/common/dma-swiotlb.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
index 6a739f8ae110..a5e50f2ec301 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/common/dma-swiotlb.c
@@ -56,13 +56,6 @@ static void loongson_dma_sync_sg_for_device(struct device *dev,
 	mb();
 }
 
-static int loongson_dma_supported(struct device *dev, u64 mask)
-{
-	if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits))
-		return 0;
-	return swiotlb_dma_supported(dev, mask);
-}
-
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 	long nid;
@@ -99,7 +92,7 @@ static const struct dma_map_ops loongson_dma_map_ops = {
 	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
 	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
 	.mapping_error = swiotlb_dma_mapping_error,
-	.dma_supported = loongson_dma_supported,
+	.dma_supported = swiotlb_dma_supported,
 };
 
 void __init plat_swiotlb_setup(void)
-- 
2.17.0

[PATCH 07/25] MIPS: consolidate the swiotlb implementations

[Christoph Hellwig]

Octeon and Loongson share exactly the same code, move it into a common
implementation, and use that implementation directly from get_arch_dma_ops.

Also provide the expected dma-direct.h helpers directly instead of
delegating to platform dma-coherence.h headers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/cavium-octeon/dma-octeon.c          | 61 ----------------
 arch/mips/include/asm/dma-direct.h            | 17 ++++-
 arch/mips/include/asm/dma-mapping.h           |  5 ++
 .../asm/mach-cavium-octeon/dma-coherence.h    | 11 ---
 .../asm/mach-loongson64/dma-coherence.h       | 10 ---
 arch/mips/loongson64/common/dma-swiotlb.c     | 71 +------------------
 arch/mips/mm/Makefile                         |  1 +
 arch/mips/mm/dma-swiotlb.c                    | 61 ++++++++++++++++
 8 files changed, 84 insertions(+), 153 deletions(-)
 create mode 100644 arch/mips/mm/dma-swiotlb.c

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 1e68636c9137..939620b90164 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -11,7 +11,6 @@
  * Copyright (C) 2010 Cavium Networks, Inc.
  */
 #include <linux/dma-direct.h>
-#include <linux/scatterlist.h>
 #include <linux/bootmem.h>
 #include <linux/swiotlb.h>
 #include <linux/types.h>
@@ -159,49 +158,6 @@ void __init octeon_pci_dma_init(void)
 }
 #endif /* CONFIG_PCI */
 
-static dma_addr_t octeon_dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
-					    direction, attrs);
-	mb();
-
-	return daddr;
-}
-
-static int octeon_dma_map_sg(struct device *dev, struct scatterlist *sg,
-	int nents, enum dma_data_direction direction, unsigned long attrs)
-{
-	int r = swiotlb_map_sg_attrs(dev, sg, nents, direction, attrs);
-	mb();
-	return r;
-}
-
-static void octeon_dma_sync_single_for_device(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	swiotlb_sync_single_for_device(dev, dma_handle, size, direction);
-	mb();
-}
-
-static void octeon_dma_sync_sg_for_device(struct device *dev,
-	struct scatterlist *sg, int nelems, enum dma_data_direction direction)
-{
-	swiotlb_sync_sg_for_device(dev, sg, nelems, direction);
-	mb();
-}
-
-static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
-
-	mb();
-
-	return ret;
-}
-
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 #ifdef CONFIG_PCI
@@ -220,21 +176,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
-static const struct dma_map_ops octeon_swiotlb_ops = {
-	.alloc			= octeon_dma_alloc_coherent,
-	.free			= swiotlb_free,
-	.map_page		= octeon_dma_map_page,
-	.unmap_page		= swiotlb_unmap_page,
-	.map_sg			= octeon_dma_map_sg,
-	.unmap_sg		= swiotlb_unmap_sg_attrs,
-	.sync_single_for_cpu	= swiotlb_sync_single_for_cpu,
-	.sync_single_for_device	= octeon_dma_sync_single_for_device,
-	.sync_sg_for_cpu	= swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device	= octeon_dma_sync_sg_for_device,
-	.mapping_error		= swiotlb_dma_mapping_error,
-	.dma_supported		= swiotlb_dma_supported
-};
-
 char *octeon_swiotlb;
 
 void __init plat_swiotlb_setup(void)
@@ -297,6 +238,4 @@ void __init plat_swiotlb_setup(void)
 
 	if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM)
 		panic("Cannot allocate SWIOTLB buffer");
-
-	mips_dma_map_ops = &octeon_swiotlb_ops;
 }
diff --git a/arch/mips/include/asm/dma-direct.h b/arch/mips/include/asm/dma-direct.h
index f32f15530aba..b5c240806e1b 100644
--- a/arch/mips/include/asm/dma-direct.h
+++ b/arch/mips/include/asm/dma-direct.h
@@ -1 +1,16 @@
-#include <asm/dma-coherence.h>
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MIPS_DMA_DIRECT_H
+#define _MIPS_DMA_DIRECT_H 1
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return false;
+
+	return addr + size - 1 <= *dev->dma_mask;
+}
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
+
+#endif /* _MIPS_DMA_DIRECT_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 886e75a383f2..ebcce3e22297 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -11,10 +11,15 @@
 #endif
 
 extern const struct dma_map_ops *mips_dma_map_ops;
+extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
+#ifdef CONFIG_SWIOTLB
+	return &mips_swiotlb_ops;
+#else
 	return mips_dma_map_ops;
+#endif
 }
 
 #define arch_setup_dma_ops arch_setup_dma_ops
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index c5cdeea495f8..c0254c72d97b 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -61,17 +61,6 @@ static inline void plat_post_dma_flush(struct device *dev)
 {
 }
 
-static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	if (!dev->dma_mask)
-		return false;
-
-	return addr + size - 1 <= *dev->dma_mask;
-}
-
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
-
 extern char *octeon_swiotlb;
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
index 64fc44dec0a8..b8825a7d1279 100644
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
@@ -17,16 +17,6 @@
 
 struct device;
 
-static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	if (!dev->dma_mask)
-		return false;
-
-	return addr + size - 1 <= *dev->dma_mask;
-}
-
-extern dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-extern phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
 static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 					  size_t size)
 {
diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
index a5e50f2ec301..a4f554bf1232 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/common/dma-swiotlb.c
@@ -1,60 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
+#include <linux/dma-direct.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
 #include <linux/swiotlb.h>
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <boot_param.h>
-#include <dma-coherence.h>
-
-static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
-
-	mb();
-	return ret;
-}
-
-static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
-				unsigned long offset, size_t size,
-				enum dma_data_direction dir,
-				unsigned long attrs)
-{
-	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
-					dir, attrs);
-	mb();
-	return daddr;
-}
-
-static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction dir,
-				unsigned long attrs)
-{
-	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, attrs);
-	mb();
-
-	return r;
-}
-
-static void loongson_dma_sync_single_for_device(struct device *dev,
-				dma_addr_t dma_handle, size_t size,
-				enum dma_data_direction dir)
-{
-	swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
-	mb();
-}
-
-static void loongson_dma_sync_sg_for_device(struct device *dev,
-				struct scatterlist *sg, int nents,
-				enum dma_data_direction dir)
-{
-	swiotlb_sync_sg_for_device(dev, sg, nents, dir);
-	mb();
-}
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
@@ -80,23 +27,7 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
-static const struct dma_map_ops loongson_dma_map_ops = {
-	.alloc = loongson_dma_alloc_coherent,
-	.free = swiotlb_free,
-	.map_page = loongson_dma_map_page,
-	.unmap_page = swiotlb_unmap_page,
-	.map_sg = loongson_dma_map_sg,
-	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-	.sync_single_for_device = loongson_dma_sync_single_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
-	.mapping_error = swiotlb_dma_mapping_error,
-	.dma_supported = swiotlb_dma_supported,
-};
-
 void __init plat_swiotlb_setup(void)
 {
 	swiotlb_init(1);
-	mips_dma_map_ops = &loongson_dma_map_ops;
 }
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index c463bdad45c7..b87e4258fd78 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R3000)		+= c-r3k.o tlb-r3k.o
diff --git a/arch/mips/mm/dma-swiotlb.c b/arch/mips/mm/dma-swiotlb.c
new file mode 100644
index 000000000000..6014ed3479fd
--- /dev/null
+++ b/arch/mips/mm/dma-swiotlb.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-mapping.h>
+#include <linux/swiotlb.h>
+
+static void *mips_swiotlb_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
+
+	mb();
+	return ret;
+}
+
+static dma_addr_t mips_swiotlb_map_page(struct device *dev,
+		struct page *page, unsigned long offset, size_t size,
+		enum dma_data_direction dir, unsigned long attrs)
+{
+	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
+					dir, attrs);
+	mb();
+	return daddr;
+}
+
+static int mips_swiotlb_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, attrs);
+	mb();
+
+	return r;
+}
+
+static void mips_swiotlb_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size, enum dma_data_direction dir)
+{
+	swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
+	mb();
+}
+
+static void mips_swiotlb_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg, int nents, enum dma_data_direction dir)
+{
+	swiotlb_sync_sg_for_device(dev, sg, nents, dir);
+	mb();
+}
+
+const struct dma_map_ops mips_swiotlb_ops = {
+	.alloc			= mips_swiotlb_alloc,
+	.free			= swiotlb_free,
+	.map_page		= mips_swiotlb_map_page,
+	.unmap_page		= swiotlb_unmap_page,
+	.map_sg			= mips_swiotlb_map_sg,
+	.unmap_sg		= swiotlb_unmap_sg_attrs,
+	.sync_single_for_cpu	= swiotlb_sync_single_for_cpu,
+	.sync_single_for_device	= mips_swiotlb_sync_single_for_device,
+	.sync_sg_for_cpu	= swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device	= mips_swiotlb_sync_sg_for_device,
+	.mapping_error		= swiotlb_dma_mapping_error,
+	.dma_supported		= swiotlb_dma_supported,
+};
+EXPORT_SYMBOL(mips_swiotlb_ops);
-- 
2.17.0

[PATCH 07/25] MIPS: consolidate the swiotlb implementations

[Christoph Hellwig]

Octeon and Loongson share exactly the same code, move it into a common
implementation, and use that implementation directly from get_arch_dma_ops.

Also provide the expected dma-direct.h helpers directly instead of
delegating to platform dma-coherence.h headers.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/cavium-octeon/dma-octeon.c          | 61 ----------------
 arch/mips/include/asm/dma-direct.h            | 17 ++++-
 arch/mips/include/asm/dma-mapping.h           |  5 ++
 .../asm/mach-cavium-octeon/dma-coherence.h    | 11 ---
 .../asm/mach-loongson64/dma-coherence.h       | 10 ---
 arch/mips/loongson64/common/dma-swiotlb.c     | 71 +------------------
 arch/mips/mm/Makefile                         |  1 +
 arch/mips/mm/dma-swiotlb.c                    | 61 ++++++++++++++++
 8 files changed, 84 insertions(+), 153 deletions(-)
 create mode 100644 arch/mips/mm/dma-swiotlb.c

diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
index 1e68636c9137..939620b90164 100644
--- a/arch/mips/cavium-octeon/dma-octeon.c
+++ b/arch/mips/cavium-octeon/dma-octeon.c
@@ -11,7 +11,6 @@
  * Copyright (C) 2010 Cavium Networks, Inc.
  */
 #include <linux/dma-direct.h>
-#include <linux/scatterlist.h>
 #include <linux/bootmem.h>
 #include <linux/swiotlb.h>
 #include <linux/types.h>
@@ -159,49 +158,6 @@ void __init octeon_pci_dma_init(void)
 }
 #endif /* CONFIG_PCI */
 
-static dma_addr_t octeon_dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
-					    direction, attrs);
-	mb();
-
-	return daddr;
-}
-
-static int octeon_dma_map_sg(struct device *dev, struct scatterlist *sg,
-	int nents, enum dma_data_direction direction, unsigned long attrs)
-{
-	int r = swiotlb_map_sg_attrs(dev, sg, nents, direction, attrs);
-	mb();
-	return r;
-}
-
-static void octeon_dma_sync_single_for_device(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	swiotlb_sync_single_for_device(dev, dma_handle, size, direction);
-	mb();
-}
-
-static void octeon_dma_sync_sg_for_device(struct device *dev,
-	struct scatterlist *sg, int nelems, enum dma_data_direction direction)
-{
-	swiotlb_sync_sg_for_device(dev, sg, nelems, direction);
-	mb();
-}
-
-static void *octeon_dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
-
-	mb();
-
-	return ret;
-}
-
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
 #ifdef CONFIG_PCI
@@ -220,21 +176,6 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
-static const struct dma_map_ops octeon_swiotlb_ops = {
-	.alloc			= octeon_dma_alloc_coherent,
-	.free			= swiotlb_free,
-	.map_page		= octeon_dma_map_page,
-	.unmap_page		= swiotlb_unmap_page,
-	.map_sg			= octeon_dma_map_sg,
-	.unmap_sg		= swiotlb_unmap_sg_attrs,
-	.sync_single_for_cpu	= swiotlb_sync_single_for_cpu,
-	.sync_single_for_device	= octeon_dma_sync_single_for_device,
-	.sync_sg_for_cpu	= swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device	= octeon_dma_sync_sg_for_device,
-	.mapping_error		= swiotlb_dma_mapping_error,
-	.dma_supported		= swiotlb_dma_supported
-};
-
 char *octeon_swiotlb;
 
 void __init plat_swiotlb_setup(void)
@@ -297,6 +238,4 @@ void __init plat_swiotlb_setup(void)
 
 	if (swiotlb_init_with_tbl(octeon_swiotlb, swiotlb_nslabs, 1) == -ENOMEM)
 		panic("Cannot allocate SWIOTLB buffer");
-
-	mips_dma_map_ops = &octeon_swiotlb_ops;
 }
diff --git a/arch/mips/include/asm/dma-direct.h b/arch/mips/include/asm/dma-direct.h
index f32f15530aba..b5c240806e1b 100644
--- a/arch/mips/include/asm/dma-direct.h
+++ b/arch/mips/include/asm/dma-direct.h
@@ -1 +1,16 @@
-#include <asm/dma-coherence.h>
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _MIPS_DMA_DIRECT_H
+#define _MIPS_DMA_DIRECT_H 1
+
+static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
+{
+	if (!dev->dma_mask)
+		return false;
+
+	return addr + size - 1 <= *dev->dma_mask;
+}
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
+
+#endif /* _MIPS_DMA_DIRECT_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 886e75a383f2..ebcce3e22297 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -11,10 +11,15 @@
 #endif
 
 extern const struct dma_map_ops *mips_dma_map_ops;
+extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
+#ifdef CONFIG_SWIOTLB
+	return &mips_swiotlb_ops;
+#else
 	return mips_dma_map_ops;
+#endif
 }
 
 #define arch_setup_dma_ops arch_setup_dma_ops
diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index c5cdeea495f8..c0254c72d97b 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -61,17 +61,6 @@ static inline void plat_post_dma_flush(struct device *dev)
 {
 }
 
-static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	if (!dev->dma_mask)
-		return false;
-
-	return addr + size - 1 <= *dev->dma_mask;
-}
-
-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
-
 extern char *octeon_swiotlb;
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
index 64fc44dec0a8..b8825a7d1279 100644
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
@@ -17,16 +17,6 @@
 
 struct device;
 
-static inline bool dma_capable(struct device *dev, dma_addr_t addr, size_t size)
-{
-	if (!dev->dma_mask)
-		return false;
-
-	return addr + size - 1 <= *dev->dma_mask;
-}
-
-extern dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr);
-extern phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr);
 static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 					  size_t size)
 {
diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
index a5e50f2ec301..a4f554bf1232 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/common/dma-swiotlb.c
@@ -1,60 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
-#include <linux/mm.h>
+#include <linux/dma-direct.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
-#include <linux/scatterlist.h>
 #include <linux/swiotlb.h>
-#include <linux/bootmem.h>
-
-#include <asm/bootinfo.h>
-#include <boot_param.h>
-#include <dma-coherence.h>
-
-static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
-		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
-
-	mb();
-	return ret;
-}
-
-static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
-				unsigned long offset, size_t size,
-				enum dma_data_direction dir,
-				unsigned long attrs)
-{
-	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
-					dir, attrs);
-	mb();
-	return daddr;
-}
-
-static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
-				int nents, enum dma_data_direction dir,
-				unsigned long attrs)
-{
-	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, attrs);
-	mb();
-
-	return r;
-}
-
-static void loongson_dma_sync_single_for_device(struct device *dev,
-				dma_addr_t dma_handle, size_t size,
-				enum dma_data_direction dir)
-{
-	swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
-	mb();
-}
-
-static void loongson_dma_sync_sg_for_device(struct device *dev,
-				struct scatterlist *sg, int nents,
-				enum dma_data_direction dir)
-{
-	swiotlb_sync_sg_for_device(dev, sg, nents, dir);
-	mb();
-}
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
@@ -80,23 +27,7 @@ phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 	return daddr;
 }
 
-static const struct dma_map_ops loongson_dma_map_ops = {
-	.alloc = loongson_dma_alloc_coherent,
-	.free = swiotlb_free,
-	.map_page = loongson_dma_map_page,
-	.unmap_page = swiotlb_unmap_page,
-	.map_sg = loongson_dma_map_sg,
-	.unmap_sg = swiotlb_unmap_sg_attrs,
-	.sync_single_for_cpu = swiotlb_sync_single_for_cpu,
-	.sync_single_for_device = loongson_dma_sync_single_for_device,
-	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
-	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
-	.mapping_error = swiotlb_dma_mapping_error,
-	.dma_supported = swiotlb_dma_supported,
-};
-
 void __init plat_swiotlb_setup(void)
 {
 	swiotlb_init(1);
-	mips_dma_map_ops = &loongson_dma_map_ops;
 }
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index c463bdad45c7..b87e4258fd78 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
 obj-$(CONFIG_CPU_R3000)		+= c-r3k.o tlb-r3k.o
diff --git a/arch/mips/mm/dma-swiotlb.c b/arch/mips/mm/dma-swiotlb.c
new file mode 100644
index 000000000000..6014ed3479fd
--- /dev/null
+++ b/arch/mips/mm/dma-swiotlb.c
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-mapping.h>
+#include <linux/swiotlb.h>
+
+static void *mips_swiotlb_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret = swiotlb_alloc(dev, size, dma_handle, gfp, attrs);
+
+	mb();
+	return ret;
+}
+
+static dma_addr_t mips_swiotlb_map_page(struct device *dev,
+		struct page *page, unsigned long offset, size_t size,
+		enum dma_data_direction dir, unsigned long attrs)
+{
+	dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
+					dir, attrs);
+	mb();
+	return daddr;
+}
+
+static int mips_swiotlb_map_sg(struct device *dev, struct scatterlist *sg,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, attrs);
+	mb();
+
+	return r;
+}
+
+static void mips_swiotlb_sync_single_for_device(struct device *dev,
+		dma_addr_t dma_handle, size_t size, enum dma_data_direction dir)
+{
+	swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
+	mb();
+}
+
+static void mips_swiotlb_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sg, int nents, enum dma_data_direction dir)
+{
+	swiotlb_sync_sg_for_device(dev, sg, nents, dir);
+	mb();
+}
+
+const struct dma_map_ops mips_swiotlb_ops = {
+	.alloc			= mips_swiotlb_alloc,
+	.free			= swiotlb_free,
+	.map_page		= mips_swiotlb_map_page,
+	.unmap_page		= swiotlb_unmap_page,
+	.map_sg			= mips_swiotlb_map_sg,
+	.unmap_sg		= swiotlb_unmap_sg_attrs,
+	.sync_single_for_cpu	= swiotlb_sync_single_for_cpu,
+	.sync_single_for_device	= mips_swiotlb_sync_single_for_device,
+	.sync_sg_for_cpu	= swiotlb_sync_sg_for_cpu,
+	.sync_sg_for_device	= mips_swiotlb_sync_sg_for_device,
+	.mapping_error		= swiotlb_dma_mapping_error,
+	.dma_supported		= swiotlb_dma_supported,
+};
+EXPORT_SYMBOL(mips_swiotlb_ops);
-- 
2.17.0

[PATCH 08/25] MIPS: remove the mips_dma_map_ops indirection

[Christoph Hellwig]

And use mips_default_dma_map_ops directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/include/asm/dma-mapping.h | 4 ++--
 arch/mips/mm/dma-default.c          | 6 ++----
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index ebcce3e22297..f24b052ec740 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -10,7 +10,7 @@
 #include <dma-coherence.h>
 #endif
 
-extern const struct dma_map_ops *mips_dma_map_ops;
+extern const struct dma_map_ops mips_default_dma_map_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
@@ -18,7 +18,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #ifdef CONFIG_SWIOTLB
 	return &mips_swiotlb_ops;
 #else
-	return mips_dma_map_ops;
+	return &mips_default_dma_map_ops;
 #endif
 }
 
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index f9fef0028ca2..2db6c2a6f964 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -384,7 +384,7 @@ static void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		__dma_sync_virtual(vaddr, size, direction);
 }
 
-static const struct dma_map_ops mips_default_dma_map_ops = {
+const struct dma_map_ops mips_default_dma_map_ops = {
 	.alloc = mips_dma_alloc_coherent,
 	.free = mips_dma_free_coherent,
 	.mmap = mips_dma_mmap,
@@ -399,6 +399,4 @@ static const struct dma_map_ops mips_default_dma_map_ops = {
 	.dma_supported = mips_dma_supported,
 	.cache_sync = mips_dma_cache_sync,
 };
-
-const struct dma_map_ops *mips_dma_map_ops = &mips_default_dma_map_ops;
-EXPORT_SYMBOL(mips_dma_map_ops);
+EXPORT_SYMBOL(mips_default_dma_map_ops);
-- 
2.17.0

[PATCH 08/25] MIPS: remove the mips_dma_map_ops indirection

[Christoph Hellwig]

And use mips_default_dma_map_ops directly.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/include/asm/dma-mapping.h | 4 ++--
 arch/mips/mm/dma-default.c          | 6 ++----
 2 files changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index ebcce3e22297..f24b052ec740 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -10,7 +10,7 @@
 #include <dma-coherence.h>
 #endif
 
-extern const struct dma_map_ops *mips_dma_map_ops;
+extern const struct dma_map_ops mips_default_dma_map_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
@@ -18,7 +18,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #ifdef CONFIG_SWIOTLB
 	return &mips_swiotlb_ops;
 #else
-	return mips_dma_map_ops;
+	return &mips_default_dma_map_ops;
 #endif
 }
 
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index f9fef0028ca2..2db6c2a6f964 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -384,7 +384,7 @@ static void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 		__dma_sync_virtual(vaddr, size, direction);
 }
 
-static const struct dma_map_ops mips_default_dma_map_ops = {
+const struct dma_map_ops mips_default_dma_map_ops = {
 	.alloc = mips_dma_alloc_coherent,
 	.free = mips_dma_free_coherent,
 	.mmap = mips_dma_mmap,
@@ -399,6 +399,4 @@ static const struct dma_map_ops mips_default_dma_map_ops = {
 	.dma_supported = mips_dma_supported,
 	.cache_sync = mips_dma_cache_sync,
 };
-
-const struct dma_map_ops *mips_dma_map_ops = &mips_default_dma_map_ops;
-EXPORT_SYMBOL(mips_dma_map_ops);
+EXPORT_SYMBOL(mips_default_dma_map_ops);
-- 
2.17.0

[PATCH 09/25] MIPS: make the default mips dma implementation optional

[Christoph Hellwig]

Octeon and loonson64 already don't use it at all, and we're going to
migrate more plaforms away from it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                   | 40 +++++++++++++++++++++++++++++
 arch/mips/include/asm/dma-mapping.h |  4 ++-
 arch/mips/jazz/Kconfig              |  3 +++
 arch/mips/loongson32/Kconfig        |  2 ++
 arch/mips/loongson64/Kconfig        |  2 ++
 arch/mips/mm/Makefile               |  3 ++-
 arch/mips/pic32/Kconfig             |  1 +
 arch/mips/txx9/Kconfig              |  1 +
 arch/mips/vr41xx/Kconfig            |  5 ++++
 9 files changed, 59 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 43bb037301f6..92cc7943d940 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -71,6 +71,9 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
 
+config MIPS_DMA_DEFAULT
+	bool
+
 menu "Machine selection"
 
 choice
@@ -92,6 +95,7 @@ config MIPS_GENERIC
 	select IRQ_MIPS_CPU
 	select LIBFDT
 	select MIPS_CPU_SCACHE
+	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NO_EXCEPT_FILL
@@ -135,6 +139,7 @@ config MIPS_ALCHEMY
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -150,6 +155,7 @@ config AR7
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -172,6 +178,7 @@ config ATH25
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
 	select IRQ_DOMAIN
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -191,6 +198,7 @@ config ATH79
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
@@ -217,6 +225,7 @@ config BMIPS_GENERIC
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -247,6 +256,7 @@ config BCM47XX
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
+	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -270,6 +280,7 @@ config BCM63XX
 	select SYNC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -292,6 +303,7 @@ config MIPS_COBALT
 	select I8259
 	select IRQ_MIPS_CPU
 	select IRQ_GT641XX
+	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select PCI
 	select SYS_HAS_CPU_NEVADA
@@ -312,6 +324,7 @@ config MACH_DECSTATION
 	select CPU_R4000_WORKAROUNDS if 64BIT
 	select CPU_R4400_WORKAROUNDS if 64BIT
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select NO_IOPORT_MAP
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_R3000
@@ -371,6 +384,7 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select PINCTRL
 	select GPIOLIB
 	select COMMON_CLK
@@ -385,6 +399,7 @@ config LANTIQ
 	select IRQ_MIPS_CPU
 	select CEVT_R4K
 	select CSRC_R4K
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -412,6 +427,7 @@ config LASAT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
 	select R5000_CPU_SCACHE
@@ -458,6 +474,7 @@ config MACH_PISTACHIO
 	select LIBFDT
 	select MFD_SYSCON
 	select MIPS_CPU_SCACHE
+	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select PINCTRL
 	select REGULATOR
@@ -490,6 +507,7 @@ config MIPS_MALTA
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select HW_HAS_PCI
 	select I8253
@@ -546,6 +564,7 @@ config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
 	select HW_HAS_PCI
+	select MIPS_DMA_DEFAULT
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -559,12 +578,14 @@ config MACH_VR41XX
 
 config NXP_STB220
 	bool "NXP STB220 board"
+	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	help
 	 Support for NXP Semiconductors STB220 Development Board.
 
 config NXP_STB225
 	bool "NXP 225 board"
+	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	select SOC_PNX8335
 	help
@@ -584,6 +605,7 @@ config PMC_MSP
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_MIPS16
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -601,6 +623,7 @@ config RALINK
 	select BOOT_RAW
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select USE_OF
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -627,6 +650,7 @@ config SGI_IP22
 	select I8259
 	select IP22_CPU_SCACHE
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
@@ -660,6 +684,7 @@ config SGI_IP27
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
@@ -686,6 +711,7 @@ config SGI_IP28
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select HW_HAS_EISA
 	select I8253
 	select I8259
@@ -722,6 +748,7 @@ config SGI_IP32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
 	select SYS_HAS_CPU_R5000
@@ -736,6 +763,7 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -745,6 +773,7 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -754,6 +783,7 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -764,6 +794,7 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -774,6 +805,7 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -786,6 +818,7 @@ config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -796,6 +829,7 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -805,6 +839,7 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -835,6 +870,7 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
+	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
@@ -865,6 +901,7 @@ config MIKROTIK_RB532
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -923,6 +960,7 @@ config NLM_XLR_BOARD
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
+	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -949,6 +987,7 @@ config NLM_XLP_BOARD
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -974,6 +1013,7 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index f24b052ec740..eaf3d9054104 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -17,8 +17,10 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
 #ifdef CONFIG_SWIOTLB
 	return &mips_swiotlb_ops;
-#else
+#elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
+#else
+	return NULL;
 #endif
 }
 
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
index 06838f80a5d7..d3ae3e0356f6 100644
--- a/arch/mips/jazz/Kconfig
+++ b/arch/mips/jazz/Kconfig
@@ -3,6 +3,7 @@ config ACER_PICA_61
 	bool "Support for Acer PICA 1 chipset"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
@@ -14,6 +15,7 @@ config MIPS_MAGNUM_4000
 	bool "Support for MIPS Magnum 4000"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -26,6 +28,7 @@ config OLIVETTI_M700
 	bool "Support for Olivetti M700-10"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 462b126f45aa..7a69a6c0ce22 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -10,6 +10,7 @@ config LOONGSON1_LS1B
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1B
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -26,6 +27,7 @@ config LOONGSON1_LS1C
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1C
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index c79e6a565572..dbd2a9f9f9a9 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,6 +13,7 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -44,6 +45,7 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b87e4258fd78..038bfed34946 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the Linux/MIPS-specific parts of the memory manager.
 #
 
-obj-y				+= cache.o dma-default.o extable.o fault.o \
+obj-y				+= cache.o extable.o fault.o \
 				   gup.o init.o mmap.o page.o page-funcs.o \
 				   pgtable.o tlbex.o tlbex-fault.o tlb-funcs.o
 
@@ -17,6 +17,7 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_MIPS_DMA_DEFAULT)	+= dma-default.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
index e284e89183cc..7feb7359b05b 100644
--- a/arch/mips/pic32/Kconfig
+++ b/arch/mips/pic32/Kconfig
@@ -11,6 +11,7 @@ config PIC32MZDA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index d2509c93f0ee..9dfda3e90348 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -16,6 +16,7 @@ config MACH_TX49XX
 config MACH_TXX9
 	bool
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 992c988b83b0..cc69b2f663fa 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -9,6 +9,7 @@ config CASIO_E55
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -19,6 +20,7 @@ config IBM_WORKPAD
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -29,6 +31,7 @@ config TANBAC_TB022X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -45,6 +48,7 @@ config VICTOR_MPC30X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
@@ -56,6 +60,7 @@ config ZAO_CAPCELLA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
-- 
2.17.0

[PATCH 09/25] MIPS: make the default mips dma implementation optional

[Christoph Hellwig]

Octeon and loonson64 already don't use it at all, and we're going to
migrate more plaforms away from it.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                   | 40 +++++++++++++++++++++++++++++
 arch/mips/include/asm/dma-mapping.h |  4 ++-
 arch/mips/jazz/Kconfig              |  3 +++
 arch/mips/loongson32/Kconfig        |  2 ++
 arch/mips/loongson64/Kconfig        |  2 ++
 arch/mips/mm/Makefile               |  3 ++-
 arch/mips/pic32/Kconfig             |  1 +
 arch/mips/txx9/Kconfig              |  1 +
 arch/mips/vr41xx/Kconfig            |  5 ++++
 9 files changed, 59 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 43bb037301f6..92cc7943d940 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -71,6 +71,9 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
 
+config MIPS_DMA_DEFAULT
+	bool
+
 menu "Machine selection"
 
 choice
@@ -92,6 +95,7 @@ config MIPS_GENERIC
 	select IRQ_MIPS_CPU
 	select LIBFDT
 	select MIPS_CPU_SCACHE
+	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NO_EXCEPT_FILL
@@ -135,6 +139,7 @@ config MIPS_ALCHEMY
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -150,6 +155,7 @@ config AR7
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -172,6 +178,7 @@ config ATH25
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
 	select IRQ_DOMAIN
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -191,6 +198,7 @@ config ATH79
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
@@ -217,6 +225,7 @@ config BMIPS_GENERIC
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -247,6 +256,7 @@ config BCM47XX
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
+	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -270,6 +280,7 @@ config BCM63XX
 	select SYNC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -292,6 +303,7 @@ config MIPS_COBALT
 	select I8259
 	select IRQ_MIPS_CPU
 	select IRQ_GT641XX
+	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select PCI
 	select SYS_HAS_CPU_NEVADA
@@ -312,6 +324,7 @@ config MACH_DECSTATION
 	select CPU_R4000_WORKAROUNDS if 64BIT
 	select CPU_R4400_WORKAROUNDS if 64BIT
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select NO_IOPORT_MAP
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_R3000
@@ -371,6 +384,7 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select PINCTRL
 	select GPIOLIB
 	select COMMON_CLK
@@ -385,6 +399,7 @@ config LANTIQ
 	select IRQ_MIPS_CPU
 	select CEVT_R4K
 	select CSRC_R4K
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -412,6 +427,7 @@ config LASAT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
 	select R5000_CPU_SCACHE
@@ -458,6 +474,7 @@ config MACH_PISTACHIO
 	select LIBFDT
 	select MFD_SYSCON
 	select MIPS_CPU_SCACHE
+	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select PINCTRL
 	select REGULATOR
@@ -490,6 +507,7 @@ config MIPS_MALTA
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select HW_HAS_PCI
 	select I8253
@@ -546,6 +564,7 @@ config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
 	select HW_HAS_PCI
+	select MIPS_DMA_DEFAULT
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -559,12 +578,14 @@ config MACH_VR41XX
 
 config NXP_STB220
 	bool "NXP STB220 board"
+	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	help
 	 Support for NXP Semiconductors STB220 Development Board.
 
 config NXP_STB225
 	bool "NXP 225 board"
+	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	select SOC_PNX8335
 	help
@@ -584,6 +605,7 @@ config PMC_MSP
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_MIPS16
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -601,6 +623,7 @@ config RALINK
 	select BOOT_RAW
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select USE_OF
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -627,6 +650,7 @@ config SGI_IP22
 	select I8259
 	select IP22_CPU_SCACHE
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
@@ -660,6 +684,7 @@ config SGI_IP27
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
@@ -686,6 +711,7 @@ config SGI_IP28
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select HW_HAS_EISA
 	select I8253
 	select I8259
@@ -722,6 +748,7 @@ config SGI_IP32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
 	select SYS_HAS_CPU_R5000
@@ -736,6 +763,7 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -745,6 +773,7 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -754,6 +783,7 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -764,6 +794,7 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -774,6 +805,7 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -786,6 +818,7 @@ config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -796,6 +829,7 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -805,6 +839,7 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
+	select MIPS_DMA_DEFAULT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -835,6 +870,7 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
+	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
@@ -865,6 +901,7 @@ config MIKROTIK_RB532
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -923,6 +960,7 @@ config NLM_XLR_BOARD
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
+	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -949,6 +987,7 @@ config NLM_XLP_BOARD
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -974,6 +1013,7 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index f24b052ec740..eaf3d9054104 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -17,8 +17,10 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
 #ifdef CONFIG_SWIOTLB
 	return &mips_swiotlb_ops;
-#else
+#elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
+#else
+	return NULL;
 #endif
 }
 
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
index 06838f80a5d7..d3ae3e0356f6 100644
--- a/arch/mips/jazz/Kconfig
+++ b/arch/mips/jazz/Kconfig
@@ -3,6 +3,7 @@ config ACER_PICA_61
 	bool "Support for Acer PICA 1 chipset"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
@@ -14,6 +15,7 @@ config MIPS_MAGNUM_4000
 	bool "Support for MIPS Magnum 4000"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -26,6 +28,7 @@ config OLIVETTI_M700
 	bool "Support for Olivetti M700-10"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 462b126f45aa..7a69a6c0ce22 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -10,6 +10,7 @@ config LOONGSON1_LS1B
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1B
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -26,6 +27,7 @@ config LOONGSON1_LS1C
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1C
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index c79e6a565572..dbd2a9f9f9a9 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,6 +13,7 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -44,6 +45,7 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index b87e4258fd78..038bfed34946 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the Linux/MIPS-specific parts of the memory manager.
 #
 
-obj-y				+= cache.o dma-default.o extable.o fault.o \
+obj-y				+= cache.o extable.o fault.o \
 				   gup.o init.o mmap.o page.o page-funcs.o \
 				   pgtable.o tlbex.o tlbex-fault.o tlb-funcs.o
 
@@ -17,6 +17,7 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
+obj-$(CONFIG_MIPS_DMA_DEFAULT)	+= dma-default.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
index e284e89183cc..7feb7359b05b 100644
--- a/arch/mips/pic32/Kconfig
+++ b/arch/mips/pic32/Kconfig
@@ -11,6 +11,7 @@ config PIC32MZDA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index d2509c93f0ee..9dfda3e90348 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -16,6 +16,7 @@ config MACH_TX49XX
 config MACH_TXX9
 	bool
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index 992c988b83b0..cc69b2f663fa 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -9,6 +9,7 @@ config CASIO_E55
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -19,6 +20,7 @@ config IBM_WORKPAD
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -29,6 +31,7 @@ config TANBAC_TB022X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -45,6 +48,7 @@ config VICTOR_MPC30X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
@@ -56,6 +60,7 @@ config ZAO_CAPCELLA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
-- 
2.17.0

[PATCH 10/25] MIPS: Octeon: remove mips dma-default stubs

[Christoph Hellwig]

Octeon doesn't use the dma-default code, and now doesn't built it either,
so these stubs can be removed.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 .../asm/mach-cavium-octeon/dma-coherence.h    | 48 -------------------
 1 file changed, 48 deletions(-)

diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index c0254c72d97b..66eee98b8b8d 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -4,11 +4,6 @@
  * for more details.
  *
  * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- *
- * Similar to mach-generic/dma-coherence.h except
- * plat_device_is_coherent hard coded to return 1.
- *
  */
 #ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
 #define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
@@ -18,49 +13,6 @@
 struct device;
 
 extern void octeon_pci_dma_init(void);
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	BUG();
-	return 0;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	BUG();
-	return 0;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	BUG();
-	return 0;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	BUG();
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
 extern char *octeon_swiotlb;
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
-- 
2.17.0

[PATCH 10/25] MIPS: Octeon: remove mips dma-default stubs

[Christoph Hellwig]

Octeon doesn't use the dma-default code, and now doesn't built it either,
so these stubs can be removed.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 .../asm/mach-cavium-octeon/dma-coherence.h    | 48 -------------------
 1 file changed, 48 deletions(-)

diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
index c0254c72d97b..66eee98b8b8d 100644
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
@@ -4,11 +4,6 @@
  * for more details.
  *
  * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- *
- *
- * Similar to mach-generic/dma-coherence.h except
- * plat_device_is_coherent hard coded to return 1.
- *
  */
 #ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
 #define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
@@ -18,49 +13,6 @@
 struct device;
 
 extern void octeon_pci_dma_init(void);
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	BUG();
-	return 0;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	BUG();
-	return 0;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	BUG();
-	return 0;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-	BUG();
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	BUG();
-	return 0;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
 extern char *octeon_swiotlb;
 
 #endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
-- 
2.17.0

[PATCH 11/25] MIPS: Octeon: move swiotlb declarations out of dma-coherence.h

[Christoph Hellwig]

No need to pull them into a global header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 .../asm/mach-cavium-octeon/dma-coherence.h     | 18 ------------------
 arch/mips/include/asm/octeon/pci-octeon.h      |  3 +++
 arch/mips/pci/pci-octeon.c                     |  2 --
 arch/mips/pci/pcie-octeon.c                    |  2 --
 4 files changed, 3 insertions(+), 22 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h

diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
deleted file mode 100644
index 66eee98b8b8d..000000000000
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
-#define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
-
-#include <linux/bug.h>
-
-struct device;
-
-extern void octeon_pci_dma_init(void);
-extern char *octeon_swiotlb;
-
-#endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 1884609741a8..b12d9a3fbfb6 100644
--- a/arch/mips/include/asm/octeon/pci-octeon.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -63,4 +63,7 @@ enum octeon_dma_bar_type {
  */
 extern enum octeon_dma_bar_type octeon_dma_bar_type;
 
+void octeon_pci_dma_init(void);
+extern char *octeon_swiotlb;
+
 #endif
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index a20697df3539..5017d5843c5a 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -21,8 +21,6 @@
 #include <asm/octeon/cvmx-pci-defs.h>
 #include <asm/octeon/pci-octeon.h>
 
-#include <dma-coherence.h>
-
 #define USE_OCTEON_INTERNAL_ARBITER
 
 /*
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 87ba86bd8696..9cc5905860ef 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -94,8 +94,6 @@ union cvmx_pcie_address {
 
 static int cvmx_pcie_rc_initialize(int pcie_port);
 
-#include <dma-coherence.h>
-
 /**
  * Return the Core virtual base address for PCIe IO access. IOs are
  * read/written as an offset from this address.
-- 
2.17.0

[PATCH 11/25] MIPS: Octeon: move swiotlb declarations out of dma-coherence.h

[Christoph Hellwig]

No need to pull them into a global header.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 .../asm/mach-cavium-octeon/dma-coherence.h     | 18 ------------------
 arch/mips/include/asm/octeon/pci-octeon.h      |  3 +++
 arch/mips/pci/pci-octeon.c                     |  2 --
 arch/mips/pci/pcie-octeon.c                    |  2 --
 4 files changed, 3 insertions(+), 22 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h

diff --git a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h b/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
deleted file mode 100644
index 66eee98b8b8d..000000000000
--- a/arch/mips/include/asm/mach-cavium-octeon/dma-coherence.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- */
-#ifndef __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
-#define __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H
-
-#include <linux/bug.h>
-
-struct device;
-
-extern void octeon_pci_dma_init(void);
-extern char *octeon_swiotlb;
-
-#endif /* __ASM_MACH_CAVIUM_OCTEON_DMA_COHERENCE_H */
diff --git a/arch/mips/include/asm/octeon/pci-octeon.h b/arch/mips/include/asm/octeon/pci-octeon.h
index 1884609741a8..b12d9a3fbfb6 100644
--- a/arch/mips/include/asm/octeon/pci-octeon.h
+++ b/arch/mips/include/asm/octeon/pci-octeon.h
@@ -63,4 +63,7 @@ enum octeon_dma_bar_type {
  */
 extern enum octeon_dma_bar_type octeon_dma_bar_type;
 
+void octeon_pci_dma_init(void);
+extern char *octeon_swiotlb;
+
 #endif
diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c
index a20697df3539..5017d5843c5a 100644
--- a/arch/mips/pci/pci-octeon.c
+++ b/arch/mips/pci/pci-octeon.c
@@ -21,8 +21,6 @@
 #include <asm/octeon/cvmx-pci-defs.h>
 #include <asm/octeon/pci-octeon.h>
 
-#include <dma-coherence.h>
-
 #define USE_OCTEON_INTERNAL_ARBITER
 
 /*
diff --git a/arch/mips/pci/pcie-octeon.c b/arch/mips/pci/pcie-octeon.c
index 87ba86bd8696..9cc5905860ef 100644
--- a/arch/mips/pci/pcie-octeon.c
+++ b/arch/mips/pci/pcie-octeon.c
@@ -94,8 +94,6 @@ union cvmx_pcie_address {
 
 static int cvmx_pcie_rc_initialize(int pcie_port);
 
-#include <dma-coherence.h>
-
 /**
  * Return the Core virtual base address for PCIe IO access. IOs are
  * read/written as an offset from this address.
-- 
2.17.0

[PATCH 12/25] MIPS: loongson: untangle dma implementations

[Christoph Hellwig]

Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
address translations stubs directly to the loongson-3 code, and remove
a few Kconfig indirections.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                                |  2 +-
 arch/mips/loongson64/Kconfig                     |  5 -----
 arch/mips/loongson64/common/Makefile             |  5 -----
 arch/mips/loongson64/loongson-3/Makefile         |  2 +-
 .../{common/dma-swiotlb.c => loongson-3/dma.c}   | 16 ++++------------
 5 files changed, 6 insertions(+), 24 deletions(-)
 rename arch/mips/loongson64/{common/dma-swiotlb.c => loongson-3/dma.c} (68%)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 92cc7943d940..24cc20ea60b9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -448,7 +448,6 @@ config MACH_LOONGSON32
 
 config MACH_LOONGSON64
 	bool "Loongson-2/3 family of machines"
-	select ARCH_HAS_PHYS_TO_DMA
 	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables the support of Loongson-2/3 family of machines.
@@ -1383,6 +1382,7 @@ choice
 config CPU_LOONGSON3
 	bool "Loongson 3 CPU"
 	depends on SYS_HAS_CPU_LOONGSON3
+	select ARCH_HAS_PHYS_TO_DMA
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index dbd2a9f9f9a9..a785bf8da3f3 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -93,7 +93,6 @@ config LOONGSON_MACH3X
 	select LOONGSON_MC146818
 	select ZONE_DMA32
 	select LEFI_FIRMWARE_INTERFACE
-	select PHYS48_TO_HT40
 	help
 		Generic Loongson 3 family machines utilize the 3A/3B revision
 		of Loongson processor and RS780/SBX00 chipset.
@@ -132,10 +131,6 @@ config LOONGSON_UART_BASE
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
 
-config PHYS48_TO_HT40
-	bool
-	default y if CPU_LOONGSON3
-
 config LOONGSON_MC146818
 	bool
 	default n
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 8235ac7eac95..684624f61f5a 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -25,8 +25,3 @@ obj-$(CONFIG_CS5536) += cs5536/
 #
 
 obj-$(CONFIG_SUSPEND) += pm.o
-
-#
-# Big Memory (SWIOTLB) Support
-#
-obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile
index 44bc1482158b..b5a0c2fa5446 100644
--- a/arch/mips/loongson64/loongson-3/Makefile
+++ b/arch/mips/loongson64/loongson-3/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for Loongson-3 family machines
 #
-obj-y			+= irq.o cop2-ex.o platform.o acpi_init.o
+obj-y			+= irq.o cop2-ex.o platform.o acpi_init.o dma.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 
diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/loongson-3/dma.c
similarity index 68%
rename from arch/mips/loongson64/common/dma-swiotlb.c
rename to arch/mips/loongson64/loongson-3/dma.c
index a4f554bf1232..5e86635f71db 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/loongson-3/dma.c
@@ -5,26 +5,18 @@
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
 	/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
 	 * Loongson-3's 48bit address space and embed it into 40bit */
-	nid = (paddr >> 44) & 0x3;
-	paddr = ((nid << 44) ^ paddr) | (nid << 37);
-#endif
-	return paddr;
+	long nid = (paddr >> 44) & 0x3;
+	return ((nid << 44) ^ paddr) | (nid << 37);
 }
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
 	/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
 	 * Loongson-3's 48bit address space and embed it into 40bit */
-	nid = (daddr >> 37) & 0x3;
-	daddr = ((nid << 37) ^ daddr) | (nid << 44);
-#endif
-	return daddr;
+	long nid = (daddr >> 37) & 0x3;
+	return ((nid << 37) ^ daddr) | (nid << 44);
 }
 
 void __init plat_swiotlb_setup(void)
-- 
2.17.0

[PATCH 12/25] MIPS: loongson: untangle dma implementations

[Christoph Hellwig]

Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
address translations stubs directly to the loongson-3 code, and remove
a few Kconfig indirections.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                                |  2 +-
 arch/mips/loongson64/Kconfig                     |  5 -----
 arch/mips/loongson64/common/Makefile             |  5 -----
 arch/mips/loongson64/loongson-3/Makefile         |  2 +-
 .../{common/dma-swiotlb.c => loongson-3/dma.c}   | 16 ++++------------
 5 files changed, 6 insertions(+), 24 deletions(-)
 rename arch/mips/loongson64/{common/dma-swiotlb.c => loongson-3/dma.c} (68%)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 92cc7943d940..24cc20ea60b9 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -448,7 +448,6 @@ config MACH_LOONGSON32
 
 config MACH_LOONGSON64
 	bool "Loongson-2/3 family of machines"
-	select ARCH_HAS_PHYS_TO_DMA
 	select SYS_SUPPORTS_ZBOOT
 	help
 	  This enables the support of Loongson-2/3 family of machines.
@@ -1383,6 +1382,7 @@ choice
 config CPU_LOONGSON3
 	bool "Loongson 3 CPU"
 	depends on SYS_HAS_CPU_LOONGSON3
+	select ARCH_HAS_PHYS_TO_DMA
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index dbd2a9f9f9a9..a785bf8da3f3 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -93,7 +93,6 @@ config LOONGSON_MACH3X
 	select LOONGSON_MC146818
 	select ZONE_DMA32
 	select LEFI_FIRMWARE_INTERFACE
-	select PHYS48_TO_HT40
 	help
 		Generic Loongson 3 family machines utilize the 3A/3B revision
 		of Loongson processor and RS780/SBX00 chipset.
@@ -132,10 +131,6 @@ config LOONGSON_UART_BASE
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
 
-config PHYS48_TO_HT40
-	bool
-	default y if CPU_LOONGSON3
-
 config LOONGSON_MC146818
 	bool
 	default n
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 8235ac7eac95..684624f61f5a 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -25,8 +25,3 @@ obj-$(CONFIG_CS5536) += cs5536/
 #
 
 obj-$(CONFIG_SUSPEND) += pm.o
-
-#
-# Big Memory (SWIOTLB) Support
-#
-obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
diff --git a/arch/mips/loongson64/loongson-3/Makefile b/arch/mips/loongson64/loongson-3/Makefile
index 44bc1482158b..b5a0c2fa5446 100644
--- a/arch/mips/loongson64/loongson-3/Makefile
+++ b/arch/mips/loongson64/loongson-3/Makefile
@@ -1,7 +1,7 @@
 #
 # Makefile for Loongson-3 family machines
 #
-obj-y			+= irq.o cop2-ex.o platform.o acpi_init.o
+obj-y			+= irq.o cop2-ex.o platform.o acpi_init.o dma.o
 
 obj-$(CONFIG_SMP)	+= smp.o
 
diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/loongson-3/dma.c
similarity index 68%
rename from arch/mips/loongson64/common/dma-swiotlb.c
rename to arch/mips/loongson64/loongson-3/dma.c
index a4f554bf1232..5e86635f71db 100644
--- a/arch/mips/loongson64/common/dma-swiotlb.c
+++ b/arch/mips/loongson64/loongson-3/dma.c
@@ -5,26 +5,18 @@
 
 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
 	/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
 	 * Loongson-3's 48bit address space and embed it into 40bit */
-	nid = (paddr >> 44) & 0x3;
-	paddr = ((nid << 44) ^ paddr) | (nid << 37);
-#endif
-	return paddr;
+	long nid = (paddr >> 44) & 0x3;
+	return ((nid << 44) ^ paddr) | (nid << 37);
 }
 
 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	long nid;
-#ifdef CONFIG_PHYS48_TO_HT40
 	/* We extract 2bit node id (bit 44~47, only bit 44~45 used now) from
 	 * Loongson-3's 48bit address space and embed it into 40bit */
-	nid = (daddr >> 37) & 0x3;
-	daddr = ((nid << 37) ^ daddr) | (nid << 44);
-#endif
-	return daddr;
+	long nid = (daddr >> 37) & 0x3;
+	return ((nid << 37) ^ daddr) | (nid << 44);
 }
 
 void __init plat_swiotlb_setup(void)
-- 
2.17.0

[PATCH 13/25] MIPS: loongson: remove loongson-3 handling from dma-coherence.h

[Christoph Hellwig]

Loongson3 is dma coherent and uses swiotlb, so it will never used any
of these helpers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 .../include/asm/mach-loongson64/dma-coherence.h  | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
index b8825a7d1279..651dd2eb3ee5 100644
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
@@ -20,29 +20,19 @@ struct device;
 static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 					  size_t size)
 {
-#ifdef CONFIG_CPU_LOONGSON3
-	return __phys_to_dma(dev, virt_to_phys(addr));
-#else
 	return virt_to_phys(addr) | 0x80000000;
-#endif
 }
 
 static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 					       struct page *page)
 {
-#ifdef CONFIG_CPU_LOONGSON3
-	return __phys_to_dma(dev, page_to_phys(page));
-#else
 	return page_to_phys(page) | 0x80000000;
-#endif
 }
 
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
-#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
-	return __dma_to_phys(dev, dma_addr);
-#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
 	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
 #else
 	return dma_addr & 0x7fffffff;
@@ -69,11 +59,7 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
-#ifdef CONFIG_DMA_NONCOHERENT
 	return 0;
-#else
-	return 1;
-#endif /* CONFIG_DMA_NONCOHERENT */
 }
 
 static inline void plat_post_dma_flush(struct device *dev)
-- 
2.17.0

[PATCH 13/25] MIPS: loongson: remove loongson-3 handling from dma-coherence.h

[Christoph Hellwig]

Loongson3 is dma coherent and uses swiotlb, so it will never used any
of these helpers.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 .../include/asm/mach-loongson64/dma-coherence.h  | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
index b8825a7d1279..651dd2eb3ee5 100644
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
@@ -20,29 +20,19 @@ struct device;
 static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
 					  size_t size)
 {
-#ifdef CONFIG_CPU_LOONGSON3
-	return __phys_to_dma(dev, virt_to_phys(addr));
-#else
 	return virt_to_phys(addr) | 0x80000000;
-#endif
 }
 
 static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
 					       struct page *page)
 {
-#ifdef CONFIG_CPU_LOONGSON3
-	return __phys_to_dma(dev, page_to_phys(page));
-#else
 	return page_to_phys(page) | 0x80000000;
-#endif
 }
 
 static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
 	dma_addr_t dma_addr)
 {
-#if defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_64BIT)
-	return __dma_to_phys(dev, dma_addr);
-#elif defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
 	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
 #else
 	return dma_addr & 0x7fffffff;
@@ -69,11 +59,7 @@ static inline int plat_dma_supported(struct device *dev, u64 mask)
 
 static inline int plat_device_is_coherent(struct device *dev)
 {
-#ifdef CONFIG_DMA_NONCOHERENT
 	return 0;
-#else
-	return 1;
-#endif /* CONFIG_DMA_NONCOHERENT */
 }
 
 static inline void plat_post_dma_flush(struct device *dev)
-- 
2.17.0

[PATCH 14/25] MIPS: use dma_direct_ops for coherent I/O

[Christoph Hellwig]

Switch the simple cache coherent architectures that don't require any
DMA address translation to dma_direct_ops.

We'll soon use at least parts of the direct DMA ops implementation for
all platforms, so select the symbol globally.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                   | 15 +--------------
 arch/mips/include/asm/dma-mapping.h |  2 +-
 2 files changed, 2 insertions(+), 15 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 24cc20ea60b9..173e5714151c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -16,6 +16,7 @@ config MIPS
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select CPU_PM if CPU_IDLE
+	select DMA_DIRECT_OPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
@@ -563,7 +564,6 @@ config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -577,14 +577,12 @@ config MACH_VR41XX
 
 config NXP_STB220
 	bool "NXP STB220 board"
-	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	help
 	 Support for NXP Semiconductors STB220 Development Board.
 
 config NXP_STB225
 	bool "NXP 225 board"
-	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	select SOC_PNX8335
 	help
@@ -762,7 +760,6 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -772,7 +769,6 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -782,7 +778,6 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -793,7 +788,6 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -804,7 +798,6 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -817,7 +810,6 @@ config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -828,7 +820,6 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -838,7 +829,6 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -959,7 +949,6 @@ config NLM_XLR_BOARD
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -986,7 +975,6 @@ config NLM_XLP_BOARD
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -1012,7 +1000,6 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index eaf3d9054104..7c0d4f0ccaa0 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -20,7 +20,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
 #else
-	return NULL;
+	return &dma_direct_ops;
 #endif
 }
 
-- 
2.17.0

[PATCH 14/25] MIPS: use dma_direct_ops for coherent I/O

[Christoph Hellwig]

Switch the simple cache coherent architectures that don't require any
DMA address translation to dma_direct_ops.

We'll soon use at least parts of the direct DMA ops implementation for
all platforms, so select the symbol globally.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                   | 15 +--------------
 arch/mips/include/asm/dma-mapping.h |  2 +-
 2 files changed, 2 insertions(+), 15 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 24cc20ea60b9..173e5714151c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -16,6 +16,7 @@ config MIPS
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select CPU_PM if CPU_IDLE
+	select DMA_DIRECT_OPS
 	select GENERIC_ATOMIC64 if !64BIT
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE
@@ -563,7 +564,6 @@ config NEC_MARKEINS
 	bool "NEC EMMA2RH Mark-eins board"
 	select SOC_EMMA2RH
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	help
 	  This enables support for the NEC Electronics Mark-eins boards.
 
@@ -577,14 +577,12 @@ config MACH_VR41XX
 
 config NXP_STB220
 	bool "NXP STB220 board"
-	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	help
 	 Support for NXP Semiconductors STB220 Development Board.
 
 config NXP_STB225
 	bool "NXP 225 board"
-	select MIPS_DMA_DEFAULT
 	select SOC_PNX833X
 	select SOC_PNX8335
 	help
@@ -762,7 +760,6 @@ config SGI_IP32
 config SIBYTE_CRHINE
 	bool "Sibyte BCM91120C-CRhine"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -772,7 +769,6 @@ config SIBYTE_CRHINE
 config SIBYTE_CARMEL
 	bool "Sibyte BCM91120x-Carmel"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1120
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -782,7 +778,6 @@ config SIBYTE_CARMEL
 config SIBYTE_CRHONE
 	bool "Sibyte BCM91125C-CRhone"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -793,7 +788,6 @@ config SIBYTE_CRHONE
 config SIBYTE_RHONE
 	bool "Sibyte BCM91125E-Rhone"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_BCM1125H
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -804,7 +798,6 @@ config SIBYTE_SWARM
 	bool "Sibyte BCM91250A-SWARM"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -817,7 +810,6 @@ config SIBYTE_LITTLESUR
 	bool "Sibyte BCM91250C2-LittleSur"
 	select BOOT_ELF32
 	select HAVE_PATA_PLATFORM
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -828,7 +820,6 @@ config SIBYTE_LITTLESUR
 config SIBYTE_SENTOSA
 	bool "Sibyte BCM91250E-Sentosa"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select SIBYTE_SB1250
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_SB1
@@ -838,7 +829,6 @@ config SIBYTE_SENTOSA
 config SIBYTE_BIGSUR
 	bool "Sibyte BCM91480B-BigSur"
 	select BOOT_ELF32
-	select MIPS_DMA_DEFAULT
 	select NR_CPUS_DEFAULT_4
 	select SIBYTE_BCM1x80
 	select SWAP_IO_SPACE
@@ -959,7 +949,6 @@ config NLM_XLR_BOARD
 	select SYS_HAS_CPU_XLR
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
@@ -986,7 +975,6 @@ config NLM_XLP_BOARD
 	select SYS_HAS_CPU_XLP
 	select SYS_SUPPORTS_SMP
 	select HW_HAS_PCI
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select PHYS_ADDR_T_64BIT
@@ -1012,7 +1000,6 @@ config MIPS_PARAVIRT
 	bool "Para-Virtualized guest system"
 	select CEVT_R4K
 	select CSRC_R4K
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index eaf3d9054104..7c0d4f0ccaa0 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -20,7 +20,7 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
 #else
-	return NULL;
+	return &dma_direct_ops;
 #endif
 }
 
-- 
2.17.0

[PATCH 15/25] MIPS: IP27: use dma_direct_ops

[Christoph Hellwig]

IP27 is coherent and has a reasonably direct mapping, just with a little
per-bus offset added into the dma address.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  2 +-
 .../include/asm/mach-ip27/dma-coherence.h     | 70 -------------------
 arch/mips/pci/pci-ip27.c                      | 14 ++++
 3 files changed, 15 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-ip27/dma-coherence.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 173e5714151c..934696595ad6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -677,11 +677,11 @@ config SGI_IP22
 
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
+	select ARCH_HAS_PHYS_TO_DMA
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
deleted file mode 100644
index 04d862020ac9..000000000000
--- a/arch/mips/include/asm/mach-ip27/dma-coherence.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
-#define __ASM_MACH_IP27_DMA_COHERENCE_H
-
-#include <asm/pci/bridge.h>
-
-#define pdev_to_baddr(pdev, addr) \
-	(BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
-#define dev_to_baddr(dev, addr) \
-	pdev_to_baddr(to_pci_dev(dev), (addr))
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
-
-	return pa;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
-
-	return pa;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr & ~(0xffUL << 56);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 1;		/* IP27 non-coherent mode is unsupported */
-}
-
-#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 0f09eafa5e3a..65b48d41a229 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
+#include <linux/dma-direct.h>
 #include <asm/sn/arch.h>
 #include <asm/pci/bridge.h>
 #include <asm/paccess.h>
@@ -182,6 +183,19 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	return 0;
 }
 
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
+
+	return bc->baddr + paddr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr & ~(0xffUL << 56);
+}
+
 /*
  * Device might live on a subordinate PCI bus.	XXX Walk up the chain of buses
  * to find the slot number in sense of the bridge device register.
-- 
2.17.0

[PATCH 15/25] MIPS: IP27: use dma_direct_ops

[Christoph Hellwig]

IP27 is coherent and has a reasonably direct mapping, just with a little
per-bus offset added into the dma address.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  2 +-
 .../include/asm/mach-ip27/dma-coherence.h     | 70 -------------------
 arch/mips/pci/pci-ip27.c                      | 14 ++++
 3 files changed, 15 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-ip27/dma-coherence.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 173e5714151c..934696595ad6 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -677,11 +677,11 @@ config SGI_IP22
 
 config SGI_IP27
 	bool "SGI IP27 (Origin200/2000)"
+	select ARCH_HAS_PHYS_TO_DMA
 	select FW_ARC
 	select FW_ARC64
 	select BOOT_ELF64
 	select DEFAULT_SGI_PARTITION
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select NR_CPUS_DEFAULT_64
diff --git a/arch/mips/include/asm/mach-ip27/dma-coherence.h b/arch/mips/include/asm/mach-ip27/dma-coherence.h
deleted file mode 100644
index 04d862020ac9..000000000000
--- a/arch/mips/include/asm/mach-ip27/dma-coherence.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- *
- */
-#ifndef __ASM_MACH_IP27_DMA_COHERENCE_H
-#define __ASM_MACH_IP27_DMA_COHERENCE_H
-
-#include <asm/pci/bridge.h>
-
-#define pdev_to_baddr(pdev, addr) \
-	(BRIDGE_CONTROLLER(pdev->bus)->baddr + (addr))
-#define dev_to_baddr(dev, addr) \
-	pdev_to_baddr(to_pci_dev(dev), (addr))
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	dma_addr_t pa = dev_to_baddr(dev, virt_to_phys(addr));
-
-	return pa;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	dma_addr_t pa = dev_to_baddr(dev, page_to_phys(page));
-
-	return pa;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr & ~(0xffUL << 56);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 1;		/* IP27 non-coherent mode is unsupported */
-}
-
-#endif /* __ASM_MACH_IP27_DMA_COHERENCE_H */
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 0f09eafa5e3a..65b48d41a229 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
+#include <linux/dma-direct.h>
 #include <asm/sn/arch.h>
 #include <asm/pci/bridge.h>
 #include <asm/paccess.h>
@@ -182,6 +183,19 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	return 0;
 }
 
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
+
+	return bc->baddr + paddr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr & ~(0xffUL << 56);
+}
+
 /*
  * Device might live on a subordinate PCI bus.	XXX Walk up the chain of buses
  * to find the slot number in sense of the bridge device register.
-- 
2.17.0

[PATCH 16/25] MIPS: move coherentio setup to setup.c

[Christoph Hellwig]

We want to be able to use it even when not building dma-default.c
in the near future.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/kernel/setup.c   | 24 ++++++++++++++++++++++++
 arch/mips/mm/dma-default.c | 23 -----------------------
 2 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 563188ac6fa2..8dc72797d5cb 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/cdmm.h>
 #include <asm/cpu.h>
 #include <asm/debug.h>
+#include <asm/dma-coherence.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
@@ -1055,3 +1056,26 @@ static int __init debugfs_mips(void)
 }
 arch_initcall(debugfs_mips);
 #endif
+
+#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
+/* User defined DMA coherency from command line. */
+enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
+EXPORT_SYMBOL_GPL(coherentio);
+int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
+
+static int __init setcoherentio(char *str)
+{
+	coherentio = IO_COHERENCE_ENABLED;
+	pr_info("Hardware DMA cache coherency (command line)\n");
+	return 0;
+}
+early_param("coherentio", setcoherentio);
+
+static int __init setnocoherentio(char *str)
+{
+	coherentio = IO_COHERENCE_DISABLED;
+	pr_info("Software DMA cache coherency (command line)\n");
+	return 0;
+}
+early_param("nocoherentio", setnocoherentio);
+#endif
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 2db6c2a6f964..10b56e8a2076 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -24,29 +24,6 @@
 
 #include <dma-coherence.h>
 
-#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
-/* User defined DMA coherency from command line. */
-enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
-EXPORT_SYMBOL_GPL(coherentio);
-int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
-
-static int __init setcoherentio(char *str)
-{
-	coherentio = IO_COHERENCE_ENABLED;
-	pr_info("Hardware DMA cache coherency (command line)\n");
-	return 0;
-}
-early_param("coherentio", setcoherentio);
-
-static int __init setnocoherentio(char *str)
-{
-	coherentio = IO_COHERENCE_DISABLED;
-	pr_info("Software DMA cache coherency (command line)\n");
-	return 0;
-}
-early_param("nocoherentio", setnocoherentio);
-#endif
-
 static inline struct page *dma_addr_to_page(struct device *dev,
 	dma_addr_t dma_addr)
 {
-- 
2.17.0

[PATCH 16/25] MIPS: move coherentio setup to setup.c

[Christoph Hellwig]

We want to be able to use it even when not building dma-default.c
in the near future.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/kernel/setup.c   | 24 ++++++++++++++++++++++++
 arch/mips/mm/dma-default.c | 23 -----------------------
 2 files changed, 24 insertions(+), 23 deletions(-)

diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 563188ac6fa2..8dc72797d5cb 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -36,6 +36,7 @@
 #include <asm/cdmm.h>
 #include <asm/cpu.h>
 #include <asm/debug.h>
+#include <asm/dma-coherence.h>
 #include <asm/sections.h>
 #include <asm/setup.h>
 #include <asm/smp-ops.h>
@@ -1055,3 +1056,26 @@ static int __init debugfs_mips(void)
 }
 arch_initcall(debugfs_mips);
 #endif
+
+#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
+/* User defined DMA coherency from command line. */
+enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
+EXPORT_SYMBOL_GPL(coherentio);
+int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
+
+static int __init setcoherentio(char *str)
+{
+	coherentio = IO_COHERENCE_ENABLED;
+	pr_info("Hardware DMA cache coherency (command line)\n");
+	return 0;
+}
+early_param("coherentio", setcoherentio);
+
+static int __init setnocoherentio(char *str)
+{
+	coherentio = IO_COHERENCE_DISABLED;
+	pr_info("Software DMA cache coherency (command line)\n");
+	return 0;
+}
+early_param("nocoherentio", setnocoherentio);
+#endif
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index 2db6c2a6f964..10b56e8a2076 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -24,29 +24,6 @@
 
 #include <dma-coherence.h>
 
-#if defined(CONFIG_DMA_MAYBE_COHERENT) && !defined(CONFIG_DMA_PERDEV_COHERENT)
-/* User defined DMA coherency from command line. */
-enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT;
-EXPORT_SYMBOL_GPL(coherentio);
-int hw_coherentio = 0;	/* Actual hardware supported DMA coherency setting. */
-
-static int __init setcoherentio(char *str)
-{
-	coherentio = IO_COHERENCE_ENABLED;
-	pr_info("Hardware DMA cache coherency (command line)\n");
-	return 0;
-}
-early_param("coherentio", setcoherentio);
-
-static int __init setnocoherentio(char *str)
-{
-	coherentio = IO_COHERENCE_DISABLED;
-	pr_info("Software DMA cache coherency (command line)\n");
-	return 0;
-}
-early_param("nocoherentio", setnocoherentio);
-#endif
-
 static inline struct page *dma_addr_to_page(struct device *dev,
 	dma_addr_t dma_addr)
 {
-- 
2.17.0

[PATCH 17/25] MIPS: use generic dma noncoherent ops for simple noncoherent platforms

[Christoph Hellwig]

Convert everything not overriding dma-coherence.h to the generic
noncoherent ops.  The new dma-noncoherent.c file duplicates a lot of
the code in dma-default.c, but that file will be gone by the end of
this series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                   |  24 +---
 arch/mips/include/asm/dma-mapping.h |   2 +
 arch/mips/loongson32/Kconfig        |   2 -
 arch/mips/mm/Makefile               |   1 +
 arch/mips/mm/dma-noncoherent.c      | 208 ++++++++++++++++++++++++++++
 arch/mips/pic32/Kconfig             |   1 -
 arch/mips/txx9/Kconfig              |   1 -
 arch/mips/vr41xx/Kconfig            |   5 -
 8 files changed, 216 insertions(+), 28 deletions(-)
 create mode 100644 arch/mips/mm/dma-noncoherent.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 934696595ad6..b39b430c92a3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -96,7 +96,6 @@ config MIPS_GENERIC
 	select IRQ_MIPS_CPU
 	select LIBFDT
 	select MIPS_CPU_SCACHE
-	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NO_EXCEPT_FILL
@@ -140,7 +139,6 @@ config MIPS_ALCHEMY
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -156,7 +154,6 @@ config AR7
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -199,7 +196,6 @@ config ATH79
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
@@ -257,7 +253,6 @@ config BCM47XX
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
-	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -281,7 +276,6 @@ config BCM63XX
 	select SYNC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -304,7 +298,6 @@ config MIPS_COBALT
 	select I8259
 	select IRQ_MIPS_CPU
 	select IRQ_GT641XX
-	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select PCI
 	select SYS_HAS_CPU_NEVADA
@@ -325,7 +318,6 @@ config MACH_DECSTATION
 	select CPU_R4000_WORKAROUNDS if 64BIT
 	select CPU_R4400_WORKAROUNDS if 64BIT
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select NO_IOPORT_MAP
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_R3000
@@ -385,7 +377,6 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select PINCTRL
 	select GPIOLIB
 	select COMMON_CLK
@@ -400,7 +391,6 @@ config LANTIQ
 	select IRQ_MIPS_CPU
 	select CEVT_R4K
 	select CSRC_R4K
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -428,7 +418,6 @@ config LASAT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
 	select R5000_CPU_SCACHE
@@ -474,7 +463,6 @@ config MACH_PISTACHIO
 	select LIBFDT
 	select MFD_SYSCON
 	select MIPS_CPU_SCACHE
-	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select PINCTRL
 	select REGULATOR
@@ -507,7 +495,6 @@ config MIPS_MALTA
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select HW_HAS_PCI
 	select I8253
@@ -602,7 +589,6 @@ config PMC_MSP
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_MIPS16
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -620,7 +606,6 @@ config RALINK
 	select BOOT_RAW
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select USE_OF
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -647,7 +632,6 @@ config SGI_IP22
 	select I8259
 	select IP22_CPU_SCACHE
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
@@ -708,7 +692,6 @@ config SGI_IP28
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select HW_HAS_EISA
 	select I8253
 	select I8259
@@ -859,7 +842,6 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
@@ -890,7 +872,6 @@ config MIKROTIK_RB532
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -1127,7 +1108,12 @@ config DMA_PERDEV_COHERENT
 
 config DMA_NONCOHERENT
 	bool
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select NEED_DMA_MAP_STATE
+	select DMA_NONCOHERENT_MMAP
+	select DMA_NONCOHERENT_CACHE_SYNC
+	select DMA_NONCOHERENT_OPS if !MIPS_DMA_DEFAULT
 
 config SYS_HAS_EARLY_PRINTK
 	bool
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 7c0d4f0ccaa0..e32a7b439816 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -19,6 +19,8 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return &mips_swiotlb_ops;
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
+#elif defined(CONFIG_DMA_NONCOHERENT_OPS)
+	return &dma_noncoherent_ops;
 #else
 	return &dma_direct_ops;
 #endif
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 7a69a6c0ce22..462b126f45aa 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -10,7 +10,6 @@ config LOONGSON1_LS1B
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1B
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -27,7 +26,6 @@ config LOONGSON1_LS1C
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1C
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 038bfed34946..c6146c3805dc 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_MIPS_DMA_DEFAULT)	+= dma-default.o
+obj-$(CONFIG_DMA_NONCOHERENT)	+= dma-noncoherent.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
new file mode 100644
index 000000000000..25edf6d6b686
--- /dev/null
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
+ * Copyright (C) 2000, 2001, 06	 Ralf Baechle <ralf@linux-mips.org>
+ * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
+ */
+#include <linux/dma-direct.h>
+#include <linux/dma-noncoherent.h>
+#include <linux/dma-contiguous.h>
+#include <linux/highmem.h>
+
+#include <asm/cache.h>
+#include <asm/cpu-type.h>
+#include <asm/dma-coherence.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+static inline int dev_is_coherent(struct device *dev)
+{
+	return dev->archdata.dma_coherent;
+}
+#else
+static inline int dev_is_coherent(struct device *dev)
+{
+	switch (coherentio) {
+	default:
+	case IO_COHERENCE_DEFAULT:
+		return hw_coherentio;
+	case IO_COHERENCE_ENABLED:
+		return 1;
+	case IO_COHERENCE_DISABLED:
+		return 0;
+	}
+}
+#endif /* CONFIG_DMA_PERDEV_COHERENT */
+
+/*
+ * The affected CPUs below in 'cpu_needs_post_dma_flush()' can speculatively
+ * fill random cachelines with stale data at any time, requiring an extra
+ * flush post-DMA.
+ *
+ * Warning on the terminology - Linux calls an uncached area coherent;  MIPS
+ * terminology calls memory areas with hardware maintained coherency coherent.
+ *
+ * Note that the R14000 and R16000 should also be checked for in this condition.
+ * However this function is only called on non-I/O-coherent systems and only the
+ * R10000 and R12000 are used in such systems, the SGI IP28 Indigo² rsp.
+ * SGI IP32 aka O2.
+ */
+static inline bool cpu_needs_post_dma_flush(struct device *dev)
+{
+	if (dev_is_coherent(dev))
+		return false;
+
+	switch (boot_cpu_type()) {
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_BMIPS5000:
+		return true;
+	default:
+		/*
+		 * Presence of MAARs suggests that the CPU supports
+		 * speculatively prefetching data, and therefore requires
+		 * the post-DMA flush/invalidate.
+		 */
+		return cpu_has_maar;
+	}
+}
+
+void *arch_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret;
+
+	ret = dma_direct_alloc(dev, size, dma_handle, gfp, attrs);
+	if (!ret)
+		return NULL;
+
+	if (!dev_is_coherent(dev) && !(attrs & DMA_ATTR_NON_CONSISTENT)) {
+		dma_cache_wback_inv((unsigned long) ret, size);
+		ret = UNCAC_ADDR(ret);
+	}
+
+	return ret;
+}
+
+void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
+		dma_addr_t dma_addr, unsigned long attrs)
+{
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT) && !dev_is_coherent(dev))
+		cpu_addr = (void *)CAC_ADDR((unsigned long)cpu_addr);
+	dma_direct_free(dev, size, cpu_addr, dma_addr, attrs);
+}
+
+int arch_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+		void *cpu_addr, dma_addr_t dma_addr, size_t size,
+		unsigned long attrs)
+{
+	unsigned long user_count = vma_pages(vma);
+	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long addr = (unsigned long)cpu_addr;
+	unsigned long off = vma->vm_pgoff;
+	unsigned long pfn;
+	int ret = -ENXIO;
+
+	if (!dev_is_coherent(dev))
+		addr = CAC_ADDR(addr);
+
+	pfn = page_to_pfn(virt_to_page((void *)addr));
+
+	if (attrs & DMA_ATTR_WRITE_COMBINE)
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
+
+	if (off < count && user_count <= (count - off)) {
+		ret = remap_pfn_range(vma, vma->vm_start,
+				      pfn + off,
+				      user_count << PAGE_SHIFT,
+				      vma->vm_page_prot);
+	}
+
+	return ret;
+}
+
+static inline void dma_sync_virt(void *addr, size_t size,
+		enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		dma_cache_wback((unsigned long)addr, size);
+		break;
+
+	case DMA_FROM_DEVICE:
+		dma_cache_inv((unsigned long)addr, size);
+		break;
+
+	case DMA_BIDIRECTIONAL:
+		dma_cache_wback_inv((unsigned long)addr, size);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/*
+ * A single sg entry may refer to multiple physically contiguous pages.  But
+ * we still need to process highmem pages individually.  If highmem is not
+ * configured then the bulk of this loop gets optimized out.
+ */
+static inline void dma_sync_phys(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
+	unsigned long offset = paddr & ~PAGE_MASK;
+	size_t left = size;
+
+	do {
+		size_t len = left;
+
+		if (PageHighMem(page)) {
+			void *addr;
+
+			if (offset + len > PAGE_SIZE) {
+				if (offset >= PAGE_SIZE) {
+					page += offset >> PAGE_SHIFT;
+					offset &= ~PAGE_MASK;
+				}
+				len = PAGE_SIZE - offset;
+			}
+
+			addr = kmap_atomic(page);
+			dma_sync_virt(addr + offset, len, dir);
+			kunmap_atomic(addr);
+		} else
+			dma_sync_virt(page_address(page) + offset, size, dir);
+		offset = 0;
+		page++;
+		left -= len;
+	} while (left);
+}
+
+void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
+{
+	if (!dev_is_coherent(dev))
+		dma_sync_phys(paddr, size, dir);
+}
+
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
+{
+	if (cpu_needs_post_dma_flush(dev))
+		dma_sync_phys(paddr, size, dir);
+}
+
+void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	if (!dev_is_coherent(dev))
+		dma_sync_virt(vaddr, size, direction);
+}
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
index 7feb7359b05b..e284e89183cc 100644
--- a/arch/mips/pic32/Kconfig
+++ b/arch/mips/pic32/Kconfig
@@ -11,7 +11,6 @@ config PIC32MZDA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 9dfda3e90348..d2509c93f0ee 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -16,7 +16,6 @@ config MACH_TX49XX
 config MACH_TXX9
 	bool
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index cc69b2f663fa..992c988b83b0 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -9,7 +9,6 @@ config CASIO_E55
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -20,7 +19,6 @@ config IBM_WORKPAD
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -31,7 +29,6 @@ config TANBAC_TB022X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -48,7 +45,6 @@ config VICTOR_MPC30X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
@@ -60,7 +56,6 @@ config ZAO_CAPCELLA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
-- 
2.17.0

[PATCH 17/25] MIPS: use generic dma noncoherent ops for simple noncoherent platforms

[Christoph Hellwig]

Convert everything not overriding dma-coherence.h to the generic
noncoherent ops.  The new dma-noncoherent.c file duplicates a lot of
the code in dma-default.c, but that file will be gone by the end of
this series.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                   |  24 +---
 arch/mips/include/asm/dma-mapping.h |   2 +
 arch/mips/loongson32/Kconfig        |   2 -
 arch/mips/mm/Makefile               |   1 +
 arch/mips/mm/dma-noncoherent.c      | 208 ++++++++++++++++++++++++++++
 arch/mips/pic32/Kconfig             |   1 -
 arch/mips/txx9/Kconfig              |   1 -
 arch/mips/vr41xx/Kconfig            |   5 -
 8 files changed, 216 insertions(+), 28 deletions(-)
 create mode 100644 arch/mips/mm/dma-noncoherent.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 934696595ad6..b39b430c92a3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -96,7 +96,6 @@ config MIPS_GENERIC
 	select IRQ_MIPS_CPU
 	select LIBFDT
 	select MIPS_CPU_SCACHE
-	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select MIPS_L1_CACHE_SHIFT_7
 	select NO_EXCEPT_FILL
@@ -140,7 +139,6 @@ config MIPS_ALCHEMY
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select DMA_MAYBE_COHERENT	# Au1000,1500,1100 aren't, rest is
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -156,7 +154,6 @@ config AR7
 	select CEVT_R4K
 	select CSRC_R4K
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SWAP_IO_SPACE
 	select SYS_HAS_CPU_MIPS32_R1
@@ -199,7 +196,6 @@ config ATH79
 	select COMMON_CLK
 	select CLKDEV_LOOKUP
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
@@ -257,7 +253,6 @@ config BCM47XX
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_MIPS32_R1
-	select MIPS_DMA_DEFAULT
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -281,7 +276,6 @@ config BCM63XX
 	select SYNC_R4K
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_HAS_EARLY_PRINTK
@@ -304,7 +298,6 @@ config MIPS_COBALT
 	select I8259
 	select IRQ_MIPS_CPU
 	select IRQ_GT641XX
-	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select PCI
 	select SYS_HAS_CPU_NEVADA
@@ -325,7 +318,6 @@ config MACH_DECSTATION
 	select CPU_R4000_WORKAROUNDS if 64BIT
 	select CPU_R4400_WORKAROUNDS if 64BIT
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select NO_IOPORT_MAP
 	select IRQ_MIPS_CPU
 	select SYS_HAS_CPU_R3000
@@ -385,7 +377,6 @@ config MACH_INGENIC
 	select SYS_SUPPORTS_ZBOOT_UART16550
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select PINCTRL
 	select GPIOLIB
 	select COMMON_CLK
@@ -400,7 +391,6 @@ config LANTIQ
 	select IRQ_MIPS_CPU
 	select CEVT_R4K
 	select CSRC_R4K
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_SUPPORTS_BIG_ENDIAN
@@ -428,7 +418,6 @@ config LASAT
 	select SYS_HAS_EARLY_PRINTK
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select PCI_GT64XXX_PCI0
 	select MIPS_NILE4
 	select R5000_CPU_SCACHE
@@ -474,7 +463,6 @@ config MACH_PISTACHIO
 	select LIBFDT
 	select MFD_SYSCON
 	select MIPS_CPU_SCACHE
-	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select PINCTRL
 	select REGULATOR
@@ -507,7 +495,6 @@ config MIPS_MALTA
 	select GENERIC_ISA_DMA
 	select HAVE_PCSPKR_PLATFORM
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select MIPS_GIC
 	select HW_HAS_PCI
 	select I8253
@@ -602,7 +589,6 @@ config PMC_MSP
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_MIPS16
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select SERIAL_8250
 	select SERIAL_8250_CONSOLE
 	select USB_EHCI_BIG_ENDIAN_MMIO
@@ -620,7 +606,6 @@ config RALINK
 	select BOOT_RAW
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select USE_OF
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
@@ -647,7 +632,6 @@ config SGI_IP22
 	select I8259
 	select IP22_CPU_SCACHE
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select SGI_HAS_I8042
 	select SGI_HAS_INDYDOG
@@ -708,7 +692,6 @@ config SGI_IP28
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select HW_HAS_EISA
 	select I8253
 	select I8259
@@ -859,7 +842,6 @@ config SNI_RM
 	select I8253
 	select I8259
 	select ISA
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE if CPU_BIG_ENDIAN
 	select SYS_HAS_CPU_R4X00
 	select SYS_HAS_CPU_R5000
@@ -890,7 +872,6 @@ config MIKROTIK_RB532
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
@@ -1127,7 +1108,12 @@ config DMA_PERDEV_COHERENT
 
 config DMA_NONCOHERENT
 	bool
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select NEED_DMA_MAP_STATE
+	select DMA_NONCOHERENT_MMAP
+	select DMA_NONCOHERENT_CACHE_SYNC
+	select DMA_NONCOHERENT_OPS if !MIPS_DMA_DEFAULT
 
 config SYS_HAS_EARLY_PRINTK
 	bool
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 7c0d4f0ccaa0..e32a7b439816 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -19,6 +19,8 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return &mips_swiotlb_ops;
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
+#elif defined(CONFIG_DMA_NONCOHERENT_OPS)
+	return &dma_noncoherent_ops;
 #else
 	return &dma_direct_ops;
 #endif
diff --git a/arch/mips/loongson32/Kconfig b/arch/mips/loongson32/Kconfig
index 7a69a6c0ce22..462b126f45aa 100644
--- a/arch/mips/loongson32/Kconfig
+++ b/arch/mips/loongson32/Kconfig
@@ -10,7 +10,6 @@ config LOONGSON1_LS1B
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1B
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -27,7 +26,6 @@ config LOONGSON1_LS1C
 	select CSRC_R4K if !MIPS_EXTERNAL_TIMER
 	select SYS_HAS_CPU_LOONGSON1C
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select IRQ_MIPS_CPU
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index 038bfed34946..c6146c3805dc 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
 obj-$(CONFIG_MIPS_DMA_DEFAULT)	+= dma-default.o
+obj-$(CONFIG_DMA_NONCOHERENT)	+= dma-noncoherent.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
 obj-$(CONFIG_CPU_R4K_CACHE_TLB) += c-r4k.o cex-gen.o tlb-r4k.o
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
new file mode 100644
index 000000000000..25edf6d6b686
--- /dev/null
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
+ * Copyright (C) 2000, 2001, 06	 Ralf Baechle <ralf@linux-mips.org>
+ * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
+ */
+#include <linux/dma-direct.h>
+#include <linux/dma-noncoherent.h>
+#include <linux/dma-contiguous.h>
+#include <linux/highmem.h>
+
+#include <asm/cache.h>
+#include <asm/cpu-type.h>
+#include <asm/dma-coherence.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_DMA_PERDEV_COHERENT
+static inline int dev_is_coherent(struct device *dev)
+{
+	return dev->archdata.dma_coherent;
+}
+#else
+static inline int dev_is_coherent(struct device *dev)
+{
+	switch (coherentio) {
+	default:
+	case IO_COHERENCE_DEFAULT:
+		return hw_coherentio;
+	case IO_COHERENCE_ENABLED:
+		return 1;
+	case IO_COHERENCE_DISABLED:
+		return 0;
+	}
+}
+#endif /* CONFIG_DMA_PERDEV_COHERENT */
+
+/*
+ * The affected CPUs below in 'cpu_needs_post_dma_flush()' can speculatively
+ * fill random cachelines with stale data at any time, requiring an extra
+ * flush post-DMA.
+ *
+ * Warning on the terminology - Linux calls an uncached area coherent;  MIPS
+ * terminology calls memory areas with hardware maintained coherency coherent.
+ *
+ * Note that the R14000 and R16000 should also be checked for in this condition.
+ * However this function is only called on non-I/O-coherent systems and only the
+ * R10000 and R12000 are used in such systems, the SGI IP28 Indigo² rsp.
+ * SGI IP32 aka O2.
+ */
+static inline bool cpu_needs_post_dma_flush(struct device *dev)
+{
+	if (dev_is_coherent(dev))
+		return false;
+
+	switch (boot_cpu_type()) {
+	case CPU_R10000:
+	case CPU_R12000:
+	case CPU_BMIPS5000:
+		return true;
+	default:
+		/*
+		 * Presence of MAARs suggests that the CPU supports
+		 * speculatively prefetching data, and therefore requires
+		 * the post-DMA flush/invalidate.
+		 */
+		return cpu_has_maar;
+	}
+}
+
+void *arch_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret;
+
+	ret = dma_direct_alloc(dev, size, dma_handle, gfp, attrs);
+	if (!ret)
+		return NULL;
+
+	if (!dev_is_coherent(dev) && !(attrs & DMA_ATTR_NON_CONSISTENT)) {
+		dma_cache_wback_inv((unsigned long) ret, size);
+		ret = UNCAC_ADDR(ret);
+	}
+
+	return ret;
+}
+
+void arch_dma_free(struct device *dev, size_t size, void *cpu_addr,
+		dma_addr_t dma_addr, unsigned long attrs)
+{
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT) && !dev_is_coherent(dev))
+		cpu_addr = (void *)CAC_ADDR((unsigned long)cpu_addr);
+	dma_direct_free(dev, size, cpu_addr, dma_addr, attrs);
+}
+
+int arch_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+		void *cpu_addr, dma_addr_t dma_addr, size_t size,
+		unsigned long attrs)
+{
+	unsigned long user_count = vma_pages(vma);
+	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
+	unsigned long addr = (unsigned long)cpu_addr;
+	unsigned long off = vma->vm_pgoff;
+	unsigned long pfn;
+	int ret = -ENXIO;
+
+	if (!dev_is_coherent(dev))
+		addr = CAC_ADDR(addr);
+
+	pfn = page_to_pfn(virt_to_page((void *)addr));
+
+	if (attrs & DMA_ATTR_WRITE_COMBINE)
+		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
+	else
+		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
+		return ret;
+
+	if (off < count && user_count <= (count - off)) {
+		ret = remap_pfn_range(vma, vma->vm_start,
+				      pfn + off,
+				      user_count << PAGE_SHIFT,
+				      vma->vm_page_prot);
+	}
+
+	return ret;
+}
+
+static inline void dma_sync_virt(void *addr, size_t size,
+		enum dma_data_direction dir)
+{
+	switch (dir) {
+	case DMA_TO_DEVICE:
+		dma_cache_wback((unsigned long)addr, size);
+		break;
+
+	case DMA_FROM_DEVICE:
+		dma_cache_inv((unsigned long)addr, size);
+		break;
+
+	case DMA_BIDIRECTIONAL:
+		dma_cache_wback_inv((unsigned long)addr, size);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+/*
+ * A single sg entry may refer to multiple physically contiguous pages.  But
+ * we still need to process highmem pages individually.  If highmem is not
+ * configured then the bulk of this loop gets optimized out.
+ */
+static inline void dma_sync_phys(phys_addr_t paddr, size_t size,
+		enum dma_data_direction dir)
+{
+	struct page *page = pfn_to_page(paddr >> PAGE_SHIFT);
+	unsigned long offset = paddr & ~PAGE_MASK;
+	size_t left = size;
+
+	do {
+		size_t len = left;
+
+		if (PageHighMem(page)) {
+			void *addr;
+
+			if (offset + len > PAGE_SIZE) {
+				if (offset >= PAGE_SIZE) {
+					page += offset >> PAGE_SHIFT;
+					offset &= ~PAGE_MASK;
+				}
+				len = PAGE_SIZE - offset;
+			}
+
+			addr = kmap_atomic(page);
+			dma_sync_virt(addr + offset, len, dir);
+			kunmap_atomic(addr);
+		} else
+			dma_sync_virt(page_address(page) + offset, size, dir);
+		offset = 0;
+		page++;
+		left -= len;
+	} while (left);
+}
+
+void arch_sync_dma_for_device(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
+{
+	if (!dev_is_coherent(dev))
+		dma_sync_phys(paddr, size, dir);
+}
+
+void arch_sync_dma_for_cpu(struct device *dev, phys_addr_t paddr,
+		size_t size, enum dma_data_direction dir)
+{
+	if (cpu_needs_post_dma_flush(dev))
+		dma_sync_phys(paddr, size, dir);
+}
+
+void arch_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		enum dma_data_direction direction)
+{
+	BUG_ON(direction == DMA_NONE);
+
+	if (!dev_is_coherent(dev))
+		dma_sync_virt(vaddr, size, direction);
+}
diff --git a/arch/mips/pic32/Kconfig b/arch/mips/pic32/Kconfig
index 7feb7359b05b..e284e89183cc 100644
--- a/arch/mips/pic32/Kconfig
+++ b/arch/mips/pic32/Kconfig
@@ -11,7 +11,6 @@ config PIC32MZDA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig
index 9dfda3e90348..d2509c93f0ee 100644
--- a/arch/mips/txx9/Kconfig
+++ b/arch/mips/txx9/Kconfig
@@ -16,7 +16,6 @@ config MACH_TX49XX
 config MACH_TXX9
 	bool
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SWAP_IO_SPACE
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig
index cc69b2f663fa..992c988b83b0 100644
--- a/arch/mips/vr41xx/Kconfig
+++ b/arch/mips/vr41xx/Kconfig
@@ -9,7 +9,6 @@ config CASIO_E55
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -20,7 +19,6 @@ config IBM_WORKPAD
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select ISA
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -31,7 +29,6 @@ config TANBAC_TB022X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select SYS_SUPPORTS_32BIT_KERNEL
@@ -48,7 +45,6 @@ config VICTOR_MPC30X
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
@@ -60,7 +56,6 @@ config ZAO_CAPCELLA
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select IRQ_MIPS_CPU
 	select HW_HAS_PCI
 	select PCI_VR41XX
-- 
2.17.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  1 +
 .../asm/mach-loongson64/dma-coherence.h       | 69 -------------------
 arch/mips/loongson64/Kconfig                  |  2 -
 arch/mips/loongson64/common/Makefile          |  1 +
 arch/mips/loongson64/common/dma.c             | 16 +++++
 5 files changed, 18 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-loongson64/dma-coherence.h
 create mode 100644 arch/mips/loongson64/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b39b430c92a3..3140955bc77c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1822,6 +1822,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
deleted file mode 100644
index 651dd2eb3ee5..000000000000
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index a785bf8da3f3..c865b4b9b775 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,7 +13,6 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -45,7 +44,6 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..57ee03022941 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -6,6 +6,7 @@
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o serial.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_CPU_LOONGSON2) += dma.o
 
 #
 # Serial port support
diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c
new file mode 100644
index 000000000000..95ede4b0fbbb
--- /dev/null
+++ b/arch/mips/loongson64/common/dma.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-direct.h>
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr | 0x80000000;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	if (dma_addr > 0x8fffffff)
+		return dma_addr;
+#endif
+	return dma_addr & 0x0fffffff;
+}
-- 
2.17.0

[PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  1 +
 .../asm/mach-loongson64/dma-coherence.h       | 69 -------------------
 arch/mips/loongson64/Kconfig                  |  2 -
 arch/mips/loongson64/common/Makefile          |  1 +
 arch/mips/loongson64/common/dma.c             | 16 +++++
 5 files changed, 18 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-loongson64/dma-coherence.h
 create mode 100644 arch/mips/loongson64/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index b39b430c92a3..3140955bc77c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1822,6 +1822,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
deleted file mode 100644
index 651dd2eb3ee5..000000000000
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx-h23VmSynlr/QT0dZR+AlfA@public.gmane.org
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index a785bf8da3f3..c865b4b9b775 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,7 +13,6 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -45,7 +44,6 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..57ee03022941 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -6,6 +6,7 @@
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o serial.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_CPU_LOONGSON2) += dma.o
 
 #
 # Serial port support
diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c
new file mode 100644
index 000000000000..95ede4b0fbbb
--- /dev/null
+++ b/arch/mips/loongson64/common/dma.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-direct.h>
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr | 0x80000000;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	if (dma_addr > 0x8fffffff)
+		return dma_addr;
+#endif
+	return dma_addr & 0x0fffffff;
+}
-- 
2.17.0

[PATCH 19/25] MIPS: IP32: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  2 +-
 .../include/asm/mach-ip32/dma-coherence.h     | 92 -------------------
 arch/mips/sgi-ip32/Makefile                   |  2 +-
 arch/mips/sgi-ip32/ip32-dma.c                 | 37 ++++++++
 4 files changed, 39 insertions(+), 94 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-ip32/dma-coherence.h
 create mode 100644 arch/mips/sgi-ip32/ip32-dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3140955bc77c..bde16399a8fe 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -720,6 +720,7 @@ config SGI_IP28
 
 config SGI_IP32
 	bool "SGI IP32 (O2)"
+	select ARCH_HAS_PHYS_TO_DMA
 	select FW_ARC
 	select FW_ARC32
 	select BOOT_ELF32
@@ -728,7 +729,6 @@ config SGI_IP32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
 	select SYS_HAS_CPU_R5000
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
deleted file mode 100644
index 7bdf212587a0..000000000000
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
-#define __ASM_MACH_IP32_DMA_COHERENCE_H
-
-#include <asm/ip32/crime.h>
-
-struct device;
-
-/*
- * Few notes.
- * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
- * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
- *    native-endian)
- * 3. All other devices see memory as one big chunk at 0x40000000
- * 4. Non-PCI devices will pass NULL as struct device*
- *
- * Thus we translate differently, depending on device.
- */
-
-#define RAM_OFFSET_MASK 0x3fffffffUL
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK;
-
-	if (dev == NULL)
-		pa += CRIME_HI_MEM_BASE;
-
-	return pa;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	dma_addr_t pa;
-
-	pa = page_to_phys(page) & RAM_OFFSET_MASK;
-
-	if (dev == NULL)
-		pa += CRIME_HI_MEM_BASE;
-
-	return pa;
-}
-
-/* This is almost certainly wrong but it's what dma-ip32.c used to use	*/
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	unsigned long addr = dma_addr & RAM_OFFSET_MASK;
-
-	if (dma_addr >= 256*1024*1024)
-		addr += CRIME_HI_MEM_BASE;
-
-	return addr;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;		/* IP32 is non-coherent */
-}
-
-#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
index 60f0227425e7..4745cd94df11 100644
--- a/arch/mips/sgi-ip32/Makefile
+++ b/arch/mips/sgi-ip32/Makefile
@@ -4,4 +4,4 @@
 #
 
 obj-y	+= ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
-	   crime.o ip32-memory.o
+	   crime.o ip32-memory.o ip32-dma.o
diff --git a/arch/mips/sgi-ip32/ip32-dma.c b/arch/mips/sgi-ip32/ip32-dma.c
new file mode 100644
index 000000000000..fa7b17cb5385
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-dma.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <linux/dma-direct.h>
+#include <asm/ip32/crime.h>
+
+/*
+ * Few notes.
+ * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
+ * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
+ *    native-endian)
+ * 3. All other devices see memory as one big chunk at 0x40000000
+ * 4. Non-PCI devices will pass NULL as struct device*
+ *
+ * Thus we translate differently, depending on device.
+ */
+
+#define RAM_OFFSET_MASK 0x3fffffffUL
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	dma_addr_t dma_addr = paddr & RAM_OFFSET_MASK;
+
+	if (!dev)
+		dma_addr += CRIME_HI_MEM_BASE;
+	return dma_addr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	phys_addr_t paddr = dma_addr & RAM_OFFSET_MASK;
+
+	if (dma_addr >= 256*1024*1024)
+		paddr += CRIME_HI_MEM_BASE;
+	return paddr;
+}
-- 
2.17.0

[PATCH 19/25] MIPS: IP32: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  2 +-
 .../include/asm/mach-ip32/dma-coherence.h     | 92 -------------------
 arch/mips/sgi-ip32/Makefile                   |  2 +-
 arch/mips/sgi-ip32/ip32-dma.c                 | 37 ++++++++
 4 files changed, 39 insertions(+), 94 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-ip32/dma-coherence.h
 create mode 100644 arch/mips/sgi-ip32/ip32-dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3140955bc77c..bde16399a8fe 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -720,6 +720,7 @@ config SGI_IP28
 
 config SGI_IP32
 	bool "SGI IP32 (O2)"
+	select ARCH_HAS_PHYS_TO_DMA
 	select FW_ARC
 	select FW_ARC32
 	select BOOT_ELF32
@@ -728,7 +729,6 @@ config SGI_IP32
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select R5000_CPU_SCACHE
 	select RM7000_CPU_SCACHE
 	select SYS_HAS_CPU_R5000
diff --git a/arch/mips/include/asm/mach-ip32/dma-coherence.h b/arch/mips/include/asm/mach-ip32/dma-coherence.h
deleted file mode 100644
index 7bdf212587a0..000000000000
--- a/arch/mips/include/asm/mach-ip32/dma-coherence.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- *
- */
-#ifndef __ASM_MACH_IP32_DMA_COHERENCE_H
-#define __ASM_MACH_IP32_DMA_COHERENCE_H
-
-#include <asm/ip32/crime.h>
-
-struct device;
-
-/*
- * Few notes.
- * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
- * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
- *    native-endian)
- * 3. All other devices see memory as one big chunk at 0x40000000
- * 4. Non-PCI devices will pass NULL as struct device*
- *
- * Thus we translate differently, depending on device.
- */
-
-#define RAM_OFFSET_MASK 0x3fffffffUL
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	dma_addr_t pa = virt_to_phys(addr) & RAM_OFFSET_MASK;
-
-	if (dev == NULL)
-		pa += CRIME_HI_MEM_BASE;
-
-	return pa;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	dma_addr_t pa;
-
-	pa = page_to_phys(page) & RAM_OFFSET_MASK;
-
-	if (dev == NULL)
-		pa += CRIME_HI_MEM_BASE;
-
-	return pa;
-}
-
-/* This is almost certainly wrong but it's what dma-ip32.c used to use	*/
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	unsigned long addr = dma_addr & RAM_OFFSET_MASK;
-
-	if (dma_addr >= 256*1024*1024)
-		addr += CRIME_HI_MEM_BASE;
-
-	return addr;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;		/* IP32 is non-coherent */
-}
-
-#endif /* __ASM_MACH_IP32_DMA_COHERENCE_H */
diff --git a/arch/mips/sgi-ip32/Makefile b/arch/mips/sgi-ip32/Makefile
index 60f0227425e7..4745cd94df11 100644
--- a/arch/mips/sgi-ip32/Makefile
+++ b/arch/mips/sgi-ip32/Makefile
@@ -4,4 +4,4 @@
 #
 
 obj-y	+= ip32-berr.o ip32-irq.o ip32-platform.o ip32-setup.o ip32-reset.o \
-	   crime.o ip32-memory.o
+	   crime.o ip32-memory.o ip32-dma.o
diff --git a/arch/mips/sgi-ip32/ip32-dma.c b/arch/mips/sgi-ip32/ip32-dma.c
new file mode 100644
index 000000000000..fa7b17cb5385
--- /dev/null
+++ b/arch/mips/sgi-ip32/ip32-dma.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
+ */
+#include <linux/dma-direct.h>
+#include <asm/ip32/crime.h>
+
+/*
+ * Few notes.
+ * 1. CPU sees memory as two chunks: 0-256M@0x0, and the rest @0x40000000+256M
+ * 2. PCI sees memory as one big chunk @0x0 (or we could use 0x40000000 for
+ *    native-endian)
+ * 3. All other devices see memory as one big chunk at 0x40000000
+ * 4. Non-PCI devices will pass NULL as struct device*
+ *
+ * Thus we translate differently, depending on device.
+ */
+
+#define RAM_OFFSET_MASK 0x3fffffffUL
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	dma_addr_t dma_addr = paddr & RAM_OFFSET_MASK;
+
+	if (!dev)
+		dma_addr += CRIME_HI_MEM_BASE;
+	return dma_addr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	phys_addr_t paddr = dma_addr & RAM_OFFSET_MASK;
+
+	if (dma_addr >= 256*1024*1024)
+		paddr += CRIME_HI_MEM_BASE;
+	return paddr;
+}
-- 
2.17.0

[PATCH 20/25] MIPS: ath25: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers only if PCI support is
enabled, everything else is generic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  1 -
 arch/mips/ath25/Kconfig                       |  1 +
 .../include/asm/mach-ath25/dma-coherence.h    | 71 -------------------
 arch/mips/pci/pci-ar2315.c                    | 24 +++++++
 4 files changed, 25 insertions(+), 72 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-ath25/dma-coherence.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bde16399a8fe..25a3c3262554 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -176,7 +176,6 @@ config ATH25
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
 	select IRQ_DOMAIN
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
index 7070b4bcd01d..2c1dfd06c366 100644
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -12,6 +12,7 @@ config SOC_AR2315
 config PCI_AR2315
 	bool "Atheros AR2315 PCI controller support"
 	depends on SOC_AR2315
+	select ARCH_HAS_PHYS_TO_DMA
 	select HW_HAS_PCI
 	select PCI
 	default y
diff --git a/arch/mips/include/asm/mach-ath25/dma-coherence.h b/arch/mips/include/asm/mach-ath25/dma-coherence.h
deleted file mode 100644
index 124755d4f079..000000000000
--- a/arch/mips/include/asm/mach-ath25/dma-coherence.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007  Felix Fietkau <nbd@openwrt.org>
- *
- */
-#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H
-#define __ASM_MACH_ATH25_DMA_COHERENCE_H
-
-#include <linux/device.h>
-
-/*
- * We need some arbitrary non-zero value to be programmed to the BAR1 register
- * of PCI host controller to enable DMA. The same value should be used as the
- * offset to calculate the physical address of DMA buffer for PCI devices.
- */
-#define AR2315_PCI_HOST_SDRAM_BASEADDR	0x20000000
-
-static inline dma_addr_t ath25_dev_offset(struct device *dev)
-{
-#ifdef CONFIG_PCI
-	extern struct bus_type pci_bus_type;
-
-	if (dev && dev->bus == &pci_bus_type)
-		return AR2315_PCI_HOST_SDRAM_BASEADDR;
-#endif
-	return 0;
-}
-
-static inline dma_addr_t
-plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return virt_to_phys(addr) + ath25_dev_offset(dev);
-}
-
-static inline dma_addr_t
-plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return page_to_phys(page) + ath25_dev_offset(dev);
-}
-
-static inline unsigned long
-plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr - ath25_dev_offset(dev);
-}
-
-static inline void
-plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size,
-		   enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index b4fa6413c4e5..c539d0d2b0cf 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -149,6 +149,13 @@
 #define AR2315_PCI_HOST_SLOT	3
 #define AR2315_PCI_HOST_DEVID	((0xff18 << 16) | PCI_VENDOR_ID_ATHEROS)
 
+/*
+ * We need some arbitrary non-zero value to be programmed to the BAR1 register
+ * of PCI host controller to enable DMA. The same value should be used as the
+ * offset to calculate the physical address of DMA buffer for PCI devices.
+ */
+#define AR2315_PCI_HOST_SDRAM_BASEADDR	0x20000000
+
 /* ??? access BAR */
 #define AR2315_PCI_HOST_MBAR0		0x10000000
 /* RAM access BAR */
@@ -167,6 +174,23 @@ struct ar2315_pci_ctrl {
 	struct resource io_res;
 };
 
+static inline dma_addr_t ar2315_dev_offset(struct device *dev)
+{
+	if (dev && dev_is_pci(dev))
+		return AR2315_PCI_HOST_SDRAM_BASEADDR;
+	return 0;
+}
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr + ar2315_dev_offset(dev);
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr - ar2315_dev_offset(dev);
+}
+
 static inline struct ar2315_pci_ctrl *ar2315_pci_bus_to_apc(struct pci_bus *bus)
 {
 	struct pci_controller *hose = bus->sysdata;
-- 
2.17.0

[PATCH 20/25] MIPS: ath25: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers only if PCI support is
enabled, everything else is generic.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  1 -
 arch/mips/ath25/Kconfig                       |  1 +
 .../include/asm/mach-ath25/dma-coherence.h    | 71 -------------------
 arch/mips/pci/pci-ar2315.c                    | 24 +++++++
 4 files changed, 25 insertions(+), 72 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-ath25/dma-coherence.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index bde16399a8fe..25a3c3262554 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -176,7 +176,6 @@ config ATH25
 	select DMA_NONCOHERENT
 	select IRQ_MIPS_CPU
 	select IRQ_DOMAIN
-	select MIPS_DMA_DEFAULT
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_32BIT_KERNEL
diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig
index 7070b4bcd01d..2c1dfd06c366 100644
--- a/arch/mips/ath25/Kconfig
+++ b/arch/mips/ath25/Kconfig
@@ -12,6 +12,7 @@ config SOC_AR2315
 config PCI_AR2315
 	bool "Atheros AR2315 PCI controller support"
 	depends on SOC_AR2315
+	select ARCH_HAS_PHYS_TO_DMA
 	select HW_HAS_PCI
 	select PCI
 	default y
diff --git a/arch/mips/include/asm/mach-ath25/dma-coherence.h b/arch/mips/include/asm/mach-ath25/dma-coherence.h
deleted file mode 100644
index 124755d4f079..000000000000
--- a/arch/mips/include/asm/mach-ath25/dma-coherence.h
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- * Copyright (C) 2007  Felix Fietkau <nbd-p3rKhJxN3npAfugRpC6u6w@public.gmane.org>
- *
- */
-#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H
-#define __ASM_MACH_ATH25_DMA_COHERENCE_H
-
-#include <linux/device.h>
-
-/*
- * We need some arbitrary non-zero value to be programmed to the BAR1 register
- * of PCI host controller to enable DMA. The same value should be used as the
- * offset to calculate the physical address of DMA buffer for PCI devices.
- */
-#define AR2315_PCI_HOST_SDRAM_BASEADDR	0x20000000
-
-static inline dma_addr_t ath25_dev_offset(struct device *dev)
-{
-#ifdef CONFIG_PCI
-	extern struct bus_type pci_bus_type;
-
-	if (dev && dev->bus == &pci_bus_type)
-		return AR2315_PCI_HOST_SDRAM_BASEADDR;
-#endif
-	return 0;
-}
-
-static inline dma_addr_t
-plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return virt_to_phys(addr) + ath25_dev_offset(dev);
-}
-
-static inline dma_addr_t
-plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return page_to_phys(page) + ath25_dev_offset(dev);
-}
-
-static inline unsigned long
-plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
-	return dma_addr - ath25_dev_offset(dev);
-}
-
-static inline void
-plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size,
-		   enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */
diff --git a/arch/mips/pci/pci-ar2315.c b/arch/mips/pci/pci-ar2315.c
index b4fa6413c4e5..c539d0d2b0cf 100644
--- a/arch/mips/pci/pci-ar2315.c
+++ b/arch/mips/pci/pci-ar2315.c
@@ -149,6 +149,13 @@
 #define AR2315_PCI_HOST_SLOT	3
 #define AR2315_PCI_HOST_DEVID	((0xff18 << 16) | PCI_VENDOR_ID_ATHEROS)
 
+/*
+ * We need some arbitrary non-zero value to be programmed to the BAR1 register
+ * of PCI host controller to enable DMA. The same value should be used as the
+ * offset to calculate the physical address of DMA buffer for PCI devices.
+ */
+#define AR2315_PCI_HOST_SDRAM_BASEADDR	0x20000000
+
 /* ??? access BAR */
 #define AR2315_PCI_HOST_MBAR0		0x10000000
 /* RAM access BAR */
@@ -167,6 +174,23 @@ struct ar2315_pci_ctrl {
 	struct resource io_res;
 };
 
+static inline dma_addr_t ar2315_dev_offset(struct device *dev)
+{
+	if (dev && dev_is_pci(dev))
+		return AR2315_PCI_HOST_SDRAM_BASEADDR;
+	return 0;
+}
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr + ar2315_dev_offset(dev);
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr - ar2315_dev_offset(dev);
+}
+
 static inline struct ar2315_pci_ctrl *ar2315_pci_bus_to_apc(struct pci_bus *bus)
 {
 	struct pci_controller *hose = bus->sysdata;
-- 
2.17.0

[PATCH 21/25] MIPS: jazz: split dma mapping operations from dma-default

[Christoph Hellwig]

Jazz actually has a very basic IOMMU, so split the ops into a separate
implementation from the generic default support (which is about to go
away anyway).

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/include/asm/dma-mapping.h           |   5 +-
 .../include/asm/mach-jazz/dma-coherence.h     |  60 --------
 arch/mips/jazz/Kconfig                        |   3 -
 arch/mips/jazz/jazzdma.c                      | 141 +++++++++++++++++-
 4 files changed, 144 insertions(+), 65 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-jazz/dma-coherence.h

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index e32a7b439816..caf97f739897 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -10,12 +10,15 @@
 #include <dma-coherence.h>
 #endif
 
+extern const struct dma_map_ops jazz_dma_ops;
 extern const struct dma_map_ops mips_default_dma_map_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
-#ifdef CONFIG_SWIOTLB
+#if defined(CONFIG_MACH_JAZZ)
+	return &jazz_dma_ops;
+#elif defined(CONFIG_SWIOTLB)
 	return &mips_swiotlb_ops;
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
deleted file mode 100644
index dc347c25c343..000000000000
--- a/arch/mips/include/asm/mach-jazz/dma-coherence.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H
-#define __ASM_MACH_JAZZ_DMA_COHERENCE_H
-
-#include <asm/jazzdma.h>
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return vdma_alloc(virt_to_phys(addr), size);
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return vdma_alloc(page_to_phys(page), PAGE_SIZE);
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return vdma_log2phys(dma_addr);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-	vdma_free(dma_addr);
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
index d3ae3e0356f6..06838f80a5d7 100644
--- a/arch/mips/jazz/Kconfig
+++ b/arch/mips/jazz/Kconfig
@@ -3,7 +3,6 @@ config ACER_PICA_61
 	bool "Support for Acer PICA 1 chipset"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
@@ -15,7 +14,6 @@ config MIPS_MAGNUM_4000
 	bool "Support for MIPS Magnum 4000"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -28,7 +26,6 @@ config OLIVETTI_M700
 	bool "Support for Olivetti M700-10"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index d626a9a391cc..446fc8c92e1e 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -16,6 +16,8 @@
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <linux/gfp.h>
+#include <linux/dma-direct.h>
+#include <linux/dma-noncoherent.h>
 #include <asm/mipsregs.h>
 #include <asm/jazz.h>
 #include <asm/io.h>
@@ -86,6 +88,7 @@ static int __init vdma_init(void)
 	printk(KERN_INFO "VDMA: R4030 DMA pagetables initialized.\n");
 	return 0;
 }
+arch_initcall(vdma_init);
 
 /*
  * Allocate DMA pagetables using a simple first-fit algorithm
@@ -556,4 +559,140 @@ int vdma_get_enable(int channel)
 	return enable;
 }
 
-arch_initcall(vdma_init);
+static void *jazz_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret;
+
+	ret = dma_direct_alloc(dev, size, dma_handle, gfp, attrs);
+	if (!ret)
+		return NULL;
+
+	*dma_handle = vdma_alloc(virt_to_phys(ret), size);
+	if (*dma_handle == VDMA_ERROR) {
+		dma_direct_free(dev, size, ret, *dma_handle, attrs);
+		return NULL;
+	}
+
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT)) {
+		dma_cache_wback_inv((unsigned long)ret, size);
+		ret = UNCAC_ADDR(ret);
+	}
+	return ret;
+}
+
+static void jazz_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, unsigned long attrs)
+{
+	vdma_free(dma_handle);
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT))
+		vaddr = (void *)CAC_ADDR((unsigned long)vaddr);
+	return dma_direct_free(dev, size, vaddr, dma_handle, attrs);
+}
+
+static dma_addr_t jazz_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		unsigned long attrs)
+{
+	phys_addr_t phys = page_to_phys(page) + offset;
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		arch_sync_dma_for_device(dev, phys, size, dir);
+	return vdma_alloc(phys, size);
+}
+
+static void jazz_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		arch_sync_dma_for_cpu(dev, vdma_log2phys(dma_addr), size, dir);
+	vdma_free(dma_addr);
+}
+
+static int jazz_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			arch_sync_dma_for_device(dev, sg_phys(sg), sg->length,
+				dir);
+		sg->dma_address = vdma_alloc(sg_phys(sg), sg->length);
+		if (sg->dma_address == VDMA_ERROR)
+			return 0;
+		sg_dma_len(sg) = sg->length;
+	}
+
+	return nents;
+}
+
+static void jazz_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length,
+				dir);
+		vdma_free(sg->dma_address);
+	}
+}
+
+static void jazz_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	arch_sync_dma_for_device(dev, vdma_log2phys(addr), size, dir);
+}
+
+static void jazz_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	arch_sync_dma_for_cpu(dev, vdma_log2phys(addr), size, dir);
+}
+
+static void jazz_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i)
+		arch_sync_dma_for_device(dev, sg_phys(sg), sg->length, dir);
+}
+
+static void jazz_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i)
+		arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir);
+}
+
+static int jazz_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == VDMA_ERROR;
+}
+
+const struct dma_map_ops jazz_dma_ops = {
+	.alloc			= jazz_dma_alloc,
+	.free			= jazz_dma_free,
+	.mmap			= arch_dma_mmap,
+	.map_page		= jazz_dma_map_page,
+	.unmap_page		= jazz_dma_unmap_page,
+	.map_sg			= jazz_dma_map_sg,
+	.unmap_sg		= jazz_dma_unmap_sg,
+	.sync_single_for_cpu	= jazz_dma_sync_single_for_cpu,
+	.sync_single_for_device	= jazz_dma_sync_single_for_device,
+	.sync_sg_for_cpu	= jazz_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= jazz_dma_sync_sg_for_device,
+	.dma_supported		= dma_direct_supported,
+	.cache_sync		= arch_dma_cache_sync,
+	.mapping_error		= jazz_dma_mapping_error,
+};
+EXPORT_SYMBOL(jazz_dma_ops);
-- 
2.17.0

[PATCH 21/25] MIPS: jazz: split dma mapping operations from dma-default

[Christoph Hellwig]

Jazz actually has a very basic IOMMU, so split the ops into a separate
implementation from the generic default support (which is about to go
away anyway).

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/include/asm/dma-mapping.h           |   5 +-
 .../include/asm/mach-jazz/dma-coherence.h     |  60 --------
 arch/mips/jazz/Kconfig                        |   3 -
 arch/mips/jazz/jazzdma.c                      | 141 +++++++++++++++++-
 4 files changed, 144 insertions(+), 65 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-jazz/dma-coherence.h

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index e32a7b439816..caf97f739897 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -10,12 +10,15 @@
 #include <dma-coherence.h>
 #endif
 
+extern const struct dma_map_ops jazz_dma_ops;
 extern const struct dma_map_ops mips_default_dma_map_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 {
-#ifdef CONFIG_SWIOTLB
+#if defined(CONFIG_MACH_JAZZ)
+	return &jazz_dma_ops;
+#elif defined(CONFIG_SWIOTLB)
 	return &mips_swiotlb_ops;
 #elif defined(CONFIG_MIPS_DMA_DEFAULT)
 	return &mips_default_dma_map_ops;
diff --git a/arch/mips/include/asm/mach-jazz/dma-coherence.h b/arch/mips/include/asm/mach-jazz/dma-coherence.h
deleted file mode 100644
index dc347c25c343..000000000000
--- a/arch/mips/include/asm/mach-jazz/dma-coherence.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- */
-#ifndef __ASM_MACH_JAZZ_DMA_COHERENCE_H
-#define __ASM_MACH_JAZZ_DMA_COHERENCE_H
-
-#include <asm/jazzdma.h>
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return vdma_alloc(virt_to_phys(addr), size);
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return vdma_alloc(page_to_phys(page), PAGE_SIZE);
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return vdma_log2phys(dma_addr);
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-	vdma_free(dma_addr);
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#endif /* __ASM_MACH_JAZZ_DMA_COHERENCE_H */
diff --git a/arch/mips/jazz/Kconfig b/arch/mips/jazz/Kconfig
index d3ae3e0356f6..06838f80a5d7 100644
--- a/arch/mips/jazz/Kconfig
+++ b/arch/mips/jazz/Kconfig
@@ -3,7 +3,6 @@ config ACER_PICA_61
 	bool "Support for Acer PICA 1 chipset"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
@@ -15,7 +14,6 @@ config MIPS_MAGNUM_4000
 	bool "Support for MIPS Magnum 4000"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
@@ -28,7 +26,6 @@ config OLIVETTI_M700
 	bool "Support for Olivetti M700-10"
 	depends on MACH_JAZZ
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
diff --git a/arch/mips/jazz/jazzdma.c b/arch/mips/jazz/jazzdma.c
index d626a9a391cc..446fc8c92e1e 100644
--- a/arch/mips/jazz/jazzdma.c
+++ b/arch/mips/jazz/jazzdma.c
@@ -16,6 +16,8 @@
 #include <linux/bootmem.h>
 #include <linux/spinlock.h>
 #include <linux/gfp.h>
+#include <linux/dma-direct.h>
+#include <linux/dma-noncoherent.h>
 #include <asm/mipsregs.h>
 #include <asm/jazz.h>
 #include <asm/io.h>
@@ -86,6 +88,7 @@ static int __init vdma_init(void)
 	printk(KERN_INFO "VDMA: R4030 DMA pagetables initialized.\n");
 	return 0;
 }
+arch_initcall(vdma_init);
 
 /*
  * Allocate DMA pagetables using a simple first-fit algorithm
@@ -556,4 +559,140 @@ int vdma_get_enable(int channel)
 	return enable;
 }
 
-arch_initcall(vdma_init);
+static void *jazz_dma_alloc(struct device *dev, size_t size,
+		dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
+{
+	void *ret;
+
+	ret = dma_direct_alloc(dev, size, dma_handle, gfp, attrs);
+	if (!ret)
+		return NULL;
+
+	*dma_handle = vdma_alloc(virt_to_phys(ret), size);
+	if (*dma_handle == VDMA_ERROR) {
+		dma_direct_free(dev, size, ret, *dma_handle, attrs);
+		return NULL;
+	}
+
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT)) {
+		dma_cache_wback_inv((unsigned long)ret, size);
+		ret = UNCAC_ADDR(ret);
+	}
+	return ret;
+}
+
+static void jazz_dma_free(struct device *dev, size_t size, void *vaddr,
+		dma_addr_t dma_handle, unsigned long attrs)
+{
+	vdma_free(dma_handle);
+	if (!(attrs & DMA_ATTR_NON_CONSISTENT))
+		vaddr = (void *)CAC_ADDR((unsigned long)vaddr);
+	return dma_direct_free(dev, size, vaddr, dma_handle, attrs);
+}
+
+static dma_addr_t jazz_dma_map_page(struct device *dev, struct page *page,
+		unsigned long offset, size_t size, enum dma_data_direction dir,
+		unsigned long attrs)
+{
+	phys_addr_t phys = page_to_phys(page) + offset;
+
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		arch_sync_dma_for_device(dev, phys, size, dir);
+	return vdma_alloc(phys, size);
+}
+
+static void jazz_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
+		size_t size, enum dma_data_direction dir, unsigned long attrs)
+{
+	if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+		arch_sync_dma_for_cpu(dev, vdma_log2phys(dma_addr), size, dir);
+	vdma_free(dma_addr);
+}
+
+static int jazz_dma_map_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			arch_sync_dma_for_device(dev, sg_phys(sg), sg->length,
+				dir);
+		sg->dma_address = vdma_alloc(sg_phys(sg), sg->length);
+		if (sg->dma_address == VDMA_ERROR)
+			return 0;
+		sg_dma_len(sg) = sg->length;
+	}
+
+	return nents;
+}
+
+static void jazz_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
+		int nents, enum dma_data_direction dir, unsigned long attrs)
+{
+	int i;
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, nents, i) {
+		if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC))
+			arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length,
+				dir);
+		vdma_free(sg->dma_address);
+	}
+}
+
+static void jazz_dma_sync_single_for_device(struct device *dev,
+		dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	arch_sync_dma_for_device(dev, vdma_log2phys(addr), size, dir);
+}
+
+static void jazz_dma_sync_single_for_cpu(struct device *dev,
+		dma_addr_t addr, size_t size, enum dma_data_direction dir)
+{
+	arch_sync_dma_for_cpu(dev, vdma_log2phys(addr), size, dir);
+}
+
+static void jazz_dma_sync_sg_for_device(struct device *dev,
+		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i)
+		arch_sync_dma_for_device(dev, sg_phys(sg), sg->length, dir);
+}
+
+static void jazz_dma_sync_sg_for_cpu(struct device *dev,
+		struct scatterlist *sgl, int nents, enum dma_data_direction dir)
+{
+	struct scatterlist *sg;
+	int i;
+
+	for_each_sg(sgl, sg, nents, i)
+		arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir);
+}
+
+static int jazz_dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return dma_addr == VDMA_ERROR;
+}
+
+const struct dma_map_ops jazz_dma_ops = {
+	.alloc			= jazz_dma_alloc,
+	.free			= jazz_dma_free,
+	.mmap			= arch_dma_mmap,
+	.map_page		= jazz_dma_map_page,
+	.unmap_page		= jazz_dma_unmap_page,
+	.map_sg			= jazz_dma_map_sg,
+	.unmap_sg		= jazz_dma_unmap_sg,
+	.sync_single_for_cpu	= jazz_dma_sync_single_for_cpu,
+	.sync_single_for_device	= jazz_dma_sync_single_for_device,
+	.sync_sg_for_cpu	= jazz_dma_sync_sg_for_cpu,
+	.sync_sg_for_device	= jazz_dma_sync_sg_for_device,
+	.dma_supported		= dma_direct_supported,
+	.cache_sync		= arch_dma_cache_sync,
+	.mapping_error		= jazz_dma_mapping_error,
+};
+EXPORT_SYMBOL(jazz_dma_ops);
-- 
2.17.0

[PATCH 22/25] dma-noncoherent: add a arch_sync_dma_for_cpu_all hook

[Christoph Hellwig]

The MIPS bmips platform needs a global flush when transferring ownership
back to the CPU.  Add a hook for that to the dma-noncoherent
implementation.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 include/linux/dma-noncoherent.h | 8 ++++++++
 lib/dma-noncoherent.c           | 8 ++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/linux/dma-noncoherent.h b/include/linux/dma-noncoherent.h
index 10b2654d549b..a0aa00cc909d 100644
--- a/include/linux/dma-noncoherent.h
+++ b/include/linux/dma-noncoherent.h
@@ -44,4 +44,12 @@ static inline void arch_sync_dma_for_cpu(struct device *dev,
 }
 #endif /* ARCH_HAS_SYNC_DMA_FOR_CPU */
 
+#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+void arch_sync_dma_for_cpu_all(struct device *dev);
+#else
+static inline void arch_sync_dma_for_cpu_all(struct device *dev)
+{
+}
+#endif /* CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL */
+
 #endif /* _LINUX_DMA_NONCOHERENT_H */
diff --git a/lib/dma-noncoherent.c b/lib/dma-noncoherent.c
index 79e9a757387f..031fe235d958 100644
--- a/lib/dma-noncoherent.c
+++ b/lib/dma-noncoherent.c
@@ -49,11 +49,13 @@ static int dma_noncoherent_map_sg(struct device *dev, struct scatterlist *sgl,
 	return nents;
 }
 
-#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
+#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \
+    defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 static void dma_noncoherent_sync_single_for_cpu(struct device *dev,
 		dma_addr_t addr, size_t size, enum dma_data_direction dir)
 {
 	arch_sync_dma_for_cpu(dev, dma_to_phys(dev, addr), size, dir);
+	arch_sync_dma_for_cpu_all(dev);
 }
 
 static void dma_noncoherent_sync_sg_for_cpu(struct device *dev,
@@ -64,6 +66,7 @@ static void dma_noncoherent_sync_sg_for_cpu(struct device *dev,
 
 	for_each_sg(sgl, sg, nents, i)
 		arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir);
+	arch_sync_dma_for_cpu_all(dev);
 }
 
 static void dma_noncoherent_unmap_page(struct device *dev, dma_addr_t addr,
@@ -89,7 +92,8 @@ const struct dma_map_ops dma_noncoherent_ops = {
 	.sync_sg_for_device	= dma_noncoherent_sync_sg_for_device,
 	.map_page		= dma_noncoherent_map_page,
 	.map_sg			= dma_noncoherent_map_sg,
-#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
+#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \
+    defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 	.sync_single_for_cpu	= dma_noncoherent_sync_single_for_cpu,
 	.sync_sg_for_cpu	= dma_noncoherent_sync_sg_for_cpu,
 	.unmap_page		= dma_noncoherent_unmap_page,
-- 
2.17.0

[PATCH 22/25] dma-noncoherent: add a arch_sync_dma_for_cpu_all hook

[Christoph Hellwig]

The MIPS bmips platform needs a global flush when transferring ownership
back to the CPU.  Add a hook for that to the dma-noncoherent
implementation.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 include/linux/dma-noncoherent.h | 8 ++++++++
 lib/dma-noncoherent.c           | 8 ++++++--
 2 files changed, 14 insertions(+), 2 deletions(-)

diff --git a/include/linux/dma-noncoherent.h b/include/linux/dma-noncoherent.h
index 10b2654d549b..a0aa00cc909d 100644
--- a/include/linux/dma-noncoherent.h
+++ b/include/linux/dma-noncoherent.h
@@ -44,4 +44,12 @@ static inline void arch_sync_dma_for_cpu(struct device *dev,
 }
 #endif /* ARCH_HAS_SYNC_DMA_FOR_CPU */
 
+#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+void arch_sync_dma_for_cpu_all(struct device *dev);
+#else
+static inline void arch_sync_dma_for_cpu_all(struct device *dev)
+{
+}
+#endif /* CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL */
+
 #endif /* _LINUX_DMA_NONCOHERENT_H */
diff --git a/lib/dma-noncoherent.c b/lib/dma-noncoherent.c
index 79e9a757387f..031fe235d958 100644
--- a/lib/dma-noncoherent.c
+++ b/lib/dma-noncoherent.c
@@ -49,11 +49,13 @@ static int dma_noncoherent_map_sg(struct device *dev, struct scatterlist *sgl,
 	return nents;
 }
 
-#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
+#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \
+    defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 static void dma_noncoherent_sync_single_for_cpu(struct device *dev,
 		dma_addr_t addr, size_t size, enum dma_data_direction dir)
 {
 	arch_sync_dma_for_cpu(dev, dma_to_phys(dev, addr), size, dir);
+	arch_sync_dma_for_cpu_all(dev);
 }
 
 static void dma_noncoherent_sync_sg_for_cpu(struct device *dev,
@@ -64,6 +66,7 @@ static void dma_noncoherent_sync_sg_for_cpu(struct device *dev,
 
 	for_each_sg(sgl, sg, nents, i)
 		arch_sync_dma_for_cpu(dev, sg_phys(sg), sg->length, dir);
+	arch_sync_dma_for_cpu_all(dev);
 }
 
 static void dma_noncoherent_unmap_page(struct device *dev, dma_addr_t addr,
@@ -89,7 +92,8 @@ const struct dma_map_ops dma_noncoherent_ops = {
 	.sync_sg_for_device	= dma_noncoherent_sync_sg_for_device,
 	.map_page		= dma_noncoherent_map_page,
 	.map_sg			= dma_noncoherent_map_sg,
-#ifdef CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU
+#if defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU) || \
+    defined(CONFIG_ARCH_HAS_SYNC_DMA_FOR_CPU_ALL)
 	.sync_single_for_cpu	= dma_noncoherent_sync_single_for_cpu,
 	.sync_sg_for_cpu	= dma_noncoherent_sync_sg_for_cpu,
 	.unmap_page		= dma_noncoherent_unmap_page,
-- 
2.17.0

[PATCH 23/25] MIPS: bmips: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, and the special
arch_sync_dma_for_cpu_all hook, everything else is generic

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  3 +-
 arch/mips/bmips/dma.c                         | 32 ++++++-----
 arch/mips/include/asm/bmips.h                 | 16 ------
 .../include/asm/mach-bmips/dma-coherence.h    | 54 -------------------
 4 files changed, 21 insertions(+), 84 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-bmips/dma-coherence.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 25a3c3262554..9ac3c6260b68 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -209,6 +209,8 @@ config ATH79
 
 config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
+	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF
@@ -221,7 +223,6 @@ config BMIPS_GENERIC
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
index 04790f4e1805..02ba0e38748d 100644
--- a/arch/mips/bmips/dma.c
+++ b/arch/mips/bmips/dma.c
@@ -17,7 +17,7 @@
 #include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <dma-coherence.h>
+#include <asm/bmips.h>
 
 /*
  * BCM338x has configurable address translation windows which allow the
@@ -40,7 +40,7 @@ static struct bmips_dma_range *bmips_dma_ranges;
 
 #define FLUSH_RAC		0x100
 
-static dma_addr_t bmips_phys_to_dma(struct device *dev, phys_addr_t pa)
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t pa)
 {
 	struct bmips_dma_range *r;
 
@@ -52,17 +52,7 @@ static dma_addr_t bmips_phys_to_dma(struct device *dev, phys_addr_t pa)
 	return pa;
 }
 
-dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return bmips_phys_to_dma(dev, virt_to_phys(addr));
-}
-
-dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return bmips_phys_to_dma(dev, page_to_phys(page));
-}
-
-unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
 {
 	struct bmips_dma_range *r;
 
@@ -74,6 +64,22 @@ unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
 	return dma_addr;
 }
 
+void arch_sync_dma_for_cpu_all(struct device *dev)
+{
+	void __iomem *cbr = BMIPS_GET_CBR();
+	u32 cfg;
+
+	if (boot_cpu_type() != CPU_BMIPS3300 &&
+	    boot_cpu_type() != CPU_BMIPS4350 &&
+	    boot_cpu_type() != CPU_BMIPS4380)
+		return;
+
+	/* Flush stale data out of the readahead cache */
+	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
+	__raw_readl(cbr + BMIPS_RAC_CONFIG);
+}
+
 static int __init bmips_init_dma_ranges(void)
 {
 	struct device_node *np =
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index b3e2975f83d3..bf6a8afd7ad2 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -123,22 +123,6 @@ static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data)
 	barrier();
 }
 
-static inline void bmips_post_dma_flush(struct device *dev)
-{
-	void __iomem *cbr = BMIPS_GET_CBR();
-	u32 cfg;
-
-	if (boot_cpu_type() != CPU_BMIPS3300 &&
-	    boot_cpu_type() != CPU_BMIPS4350 &&
-	    boot_cpu_type() != CPU_BMIPS4380)
-		return;
-
-	/* Flush stale data out of the readahead cache */
-	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
-	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
-	__raw_readl(cbr + BMIPS_RAC_CONFIG);
-}
-
 #endif /* !defined(__ASSEMBLY__) */
 
 #endif /* _ASM_BMIPS_H */
diff --git a/arch/mips/include/asm/mach-bmips/dma-coherence.h b/arch/mips/include/asm/mach-bmips/dma-coherence.h
deleted file mode 100644
index d29781f02285..000000000000
--- a/arch/mips/include/asm/mach-bmips/dma-coherence.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2009 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_MACH_BMIPS_DMA_COHERENCE_H
-#define __ASM_MACH_BMIPS_DMA_COHERENCE_H
-
-#include <asm/bmips.h>
-#include <asm/cpu-type.h>
-#include <asm/cpu.h>
-
-struct device;
-
-extern dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size);
-extern dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page);
-extern unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr);
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#define plat_post_dma_flush	bmips_post_dma_flush
-
-#endif /* __ASM_MACH_BMIPS_DMA_COHERENCE_H */
-- 
2.17.0

[PATCH 23/25] MIPS: bmips: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, and the special
arch_sync_dma_for_cpu_all hook, everything else is generic

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  3 +-
 arch/mips/bmips/dma.c                         | 32 ++++++-----
 arch/mips/include/asm/bmips.h                 | 16 ------
 .../include/asm/mach-bmips/dma-coherence.h    | 54 -------------------
 4 files changed, 21 insertions(+), 84 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-bmips/dma-coherence.h

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 25a3c3262554..9ac3c6260b68 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -209,6 +209,8 @@ config ATH79
 
 config BMIPS_GENERIC
 	bool "Broadcom Generic BMIPS kernel"
+	select ARCH_HAS_SYNC_DMA_FOR_CPU_ALL
+	select ARCH_HAS_PHYS_TO_DMA
 	select BOOT_RAW
 	select NO_EXCEPT_FILL
 	select USE_OF
@@ -221,7 +223,6 @@ config BMIPS_GENERIC
 	select BCM7120_L2_IRQ
 	select BRCMSTB_L2_IRQ
 	select IRQ_MIPS_CPU
-	select MIPS_DMA_DEFAULT
 	select DMA_NONCOHERENT
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
diff --git a/arch/mips/bmips/dma.c b/arch/mips/bmips/dma.c
index 04790f4e1805..02ba0e38748d 100644
--- a/arch/mips/bmips/dma.c
+++ b/arch/mips/bmips/dma.c
@@ -17,7 +17,7 @@
 #include <linux/printk.h>
 #include <linux/slab.h>
 #include <linux/types.h>
-#include <dma-coherence.h>
+#include <asm/bmips.h>
 
 /*
  * BCM338x has configurable address translation windows which allow the
@@ -40,7 +40,7 @@ static struct bmips_dma_range *bmips_dma_ranges;
 
 #define FLUSH_RAC		0x100
 
-static dma_addr_t bmips_phys_to_dma(struct device *dev, phys_addr_t pa)
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t pa)
 {
 	struct bmips_dma_range *r;
 
@@ -52,17 +52,7 @@ static dma_addr_t bmips_phys_to_dma(struct device *dev, phys_addr_t pa)
 	return pa;
 }
 
-dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size)
-{
-	return bmips_phys_to_dma(dev, virt_to_phys(addr));
-}
-
-dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page)
-{
-	return bmips_phys_to_dma(dev, page_to_phys(page));
-}
-
-unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
 {
 	struct bmips_dma_range *r;
 
@@ -74,6 +64,22 @@ unsigned long plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
 	return dma_addr;
 }
 
+void arch_sync_dma_for_cpu_all(struct device *dev)
+{
+	void __iomem *cbr = BMIPS_GET_CBR();
+	u32 cfg;
+
+	if (boot_cpu_type() != CPU_BMIPS3300 &&
+	    boot_cpu_type() != CPU_BMIPS4350 &&
+	    boot_cpu_type() != CPU_BMIPS4380)
+		return;
+
+	/* Flush stale data out of the readahead cache */
+	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
+	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
+	__raw_readl(cbr + BMIPS_RAC_CONFIG);
+}
+
 static int __init bmips_init_dma_ranges(void)
 {
 	struct device_node *np =
diff --git a/arch/mips/include/asm/bmips.h b/arch/mips/include/asm/bmips.h
index b3e2975f83d3..bf6a8afd7ad2 100644
--- a/arch/mips/include/asm/bmips.h
+++ b/arch/mips/include/asm/bmips.h
@@ -123,22 +123,6 @@ static inline void bmips_write_zscm_reg(unsigned int offset, unsigned long data)
 	barrier();
 }
 
-static inline void bmips_post_dma_flush(struct device *dev)
-{
-	void __iomem *cbr = BMIPS_GET_CBR();
-	u32 cfg;
-
-	if (boot_cpu_type() != CPU_BMIPS3300 &&
-	    boot_cpu_type() != CPU_BMIPS4350 &&
-	    boot_cpu_type() != CPU_BMIPS4380)
-		return;
-
-	/* Flush stale data out of the readahead cache */
-	cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
-	__raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
-	__raw_readl(cbr + BMIPS_RAC_CONFIG);
-}
-
 #endif /* !defined(__ASSEMBLY__) */
 
 #endif /* _ASM_BMIPS_H */
diff --git a/arch/mips/include/asm/mach-bmips/dma-coherence.h b/arch/mips/include/asm/mach-bmips/dma-coherence.h
deleted file mode 100644
index d29781f02285..000000000000
--- a/arch/mips/include/asm/mach-bmips/dma-coherence.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * Copyright (C) 2006 Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- * Copyright (C) 2009 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_MACH_BMIPS_DMA_COHERENCE_H
-#define __ASM_MACH_BMIPS_DMA_COHERENCE_H
-
-#include <asm/bmips.h>
-#include <asm/cpu-type.h>
-#include <asm/cpu.h>
-
-struct device;
-
-extern dma_addr_t plat_map_dma_mem(struct device *dev, void *addr, size_t size);
-extern dma_addr_t plat_map_dma_mem_page(struct device *dev, struct page *page);
-extern unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr);
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-#define plat_post_dma_flush	bmips_post_dma_flush
-
-#endif /* __ASM_MACH_BMIPS_DMA_COHERENCE_H */
-- 
2.17.0

[PATCH 24/25] MIPS: remove the old dma-default implementation

[Christoph Hellwig]

Now unused.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |   5 +-
 arch/mips/include/asm/dma-mapping.h           |   3 -
 .../include/asm/mach-generic/dma-coherence.h  |  73 ----
 arch/mips/mm/Makefile                         |   1 -
 arch/mips/mm/dma-default.c                    | 379 ------------------
 5 files changed, 1 insertion(+), 460 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-generic/dma-coherence.h
 delete mode 100644 arch/mips/mm/dma-default.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9ac3c6260b68..ad5a542bf094 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,9 +72,6 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
 
-config MIPS_DMA_DEFAULT
-	bool
-
 menu "Machine selection"
 
 choice
@@ -1113,7 +1110,7 @@ config DMA_NONCOHERENT
 	select NEED_DMA_MAP_STATE
 	select DMA_NONCOHERENT_MMAP
 	select DMA_NONCOHERENT_CACHE_SYNC
-	select DMA_NONCOHERENT_OPS if !MIPS_DMA_DEFAULT
+	select DMA_NONCOHERENT_OPS
 
 config SYS_HAS_EARLY_PRINTK
 	bool
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index caf97f739897..143250986e17 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -11,7 +11,6 @@
 #endif
 
 extern const struct dma_map_ops jazz_dma_ops;
-extern const struct dma_map_ops mips_default_dma_map_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
@@ -20,8 +19,6 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return &jazz_dma_ops;
 #elif defined(CONFIG_SWIOTLB)
 	return &mips_swiotlb_ops;
-#elif defined(CONFIG_MIPS_DMA_DEFAULT)
-	return &mips_default_dma_map_ops;
 #elif defined(CONFIG_DMA_NONCOHERENT_OPS)
 	return &dma_noncoherent_ops;
 #else
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
deleted file mode 100644
index 8ad7a40ca786..000000000000
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	return virt_to_phys(addr);
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return page_to_phys(page);
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-#ifdef CONFIG_DMA_PERDEV_COHERENT
-	return dev->archdata.dma_coherent;
-#else
-	switch (coherentio) {
-	default:
-	case IO_COHERENCE_DEFAULT:
-		return hw_coherentio;
-	case IO_COHERENCE_ENABLED:
-		return 1;
-	case IO_COHERENCE_DISABLED:
-		return 0;
-	}
-#endif
-}
-
-#ifndef plat_post_dma_flush
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-#endif
-
-#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index c6146c3805dc..6922f393af19 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_MIPS_DMA_DEFAULT)	+= dma-default.o
 obj-$(CONFIG_DMA_NONCOHERENT)	+= dma-noncoherent.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
deleted file mode 100644
index 10b56e8a2076..000000000000
--- a/arch/mips/mm/dma-default.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
- * Copyright (C) 2000, 2001, 06	 Ralf Baechle <ralf@linux-mips.org>
- * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
- */
-
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/export.h>
-#include <linux/scatterlist.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-#include <linux/dma-contiguous.h>
-
-#include <asm/cache.h>
-#include <asm/cpu-type.h>
-#include <asm/io.h>
-
-#include <dma-coherence.h>
-
-static inline struct page *dma_addr_to_page(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return pfn_to_page(
-		plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
-}
-
-/*
- * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
- * speculatively fill random cachelines with stale data at any time,
- * requiring an extra flush post-DMA.
- *
- * Warning on the terminology - Linux calls an uncached area coherent;
- * MIPS terminology calls memory areas with hardware maintained coherency
- * coherent.
- *
- * Note that the R14000 and R16000 should also be checked for in this
- * condition.  However this function is only called on non-I/O-coherent
- * systems and only the R10000 and R12000 are used in such systems, the
- * SGI IP28 Indigo² rsp. SGI IP32 aka O2.
- */
-static inline bool cpu_needs_post_dma_flush(struct device *dev)
-{
-	if (plat_device_is_coherent(dev))
-		return false;
-
-	switch (boot_cpu_type()) {
-	case CPU_R10000:
-	case CPU_R12000:
-	case CPU_BMIPS5000:
-		return true;
-
-	default:
-		/*
-		 * Presence of MAARs suggests that the CPU supports
-		 * speculatively prefetching data, and therefore requires
-		 * the post-DMA flush/invalidate.
-		 */
-		return cpu_has_maar;
-	}
-}
-
-static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
-{
-	gfp_t dma_flag;
-
-#ifdef CONFIG_ISA
-	if (dev == NULL)
-		dma_flag = __GFP_DMA;
-	else
-#endif
-#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
-	     if (dev == NULL || dev->coherent_dma_mask < DMA_BIT_MASK(32))
-			dma_flag = __GFP_DMA;
-	else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
-			dma_flag = __GFP_DMA32;
-	else
-#endif
-#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
-	     if (dev == NULL || dev->coherent_dma_mask < DMA_BIT_MASK(64))
-		dma_flag = __GFP_DMA32;
-	else
-#endif
-#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
-	     if (dev == NULL ||
-		 dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
-		dma_flag = __GFP_DMA;
-	else
-#endif
-		dma_flag = 0;
-
-	/* Don't invoke OOM killer */
-	gfp |= __GFP_NORETRY;
-
-	return gfp | dma_flag;
-}
-
-static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret;
-	struct page *page = NULL;
-	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-
-	gfp = massage_gfp_flags(dev, gfp);
-
-	if (IS_ENABLED(CONFIG_DMA_CMA) && gfpflags_allow_blocking(gfp))
-		page = dma_alloc_from_contiguous(dev, count, get_order(size),
-						 gfp);
-	if (!page)
-		page = alloc_pages(gfp, get_order(size));
-
-	if (!page)
-		return NULL;
-
-	ret = page_address(page);
-	memset(ret, 0, size);
-	*dma_handle = plat_map_dma_mem(dev, ret, size);
-	if (!(attrs & DMA_ATTR_NON_CONSISTENT) &&
-	    !plat_device_is_coherent(dev)) {
-		dma_cache_wback_inv((unsigned long) ret, size);
-		ret = UNCAC_ADDR(ret);
-	}
-
-	return ret;
-}
-
-static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-	dma_addr_t dma_handle, unsigned long attrs)
-{
-	unsigned long addr = (unsigned long) vaddr;
-	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	struct page *page = NULL;
-
-	plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
-
-	if (!(attrs & DMA_ATTR_NON_CONSISTENT) && !plat_device_is_coherent(dev))
-		addr = CAC_ADDR(addr);
-
-	page = virt_to_page((void *) addr);
-
-	if (!dma_release_from_contiguous(dev, page, count))
-		__free_pages(page, get_order(size));
-}
-
-static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-	void *cpu_addr, dma_addr_t dma_addr, size_t size,
-	unsigned long attrs)
-{
-	unsigned long user_count = vma_pages(vma);
-	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	unsigned long addr = (unsigned long)cpu_addr;
-	unsigned long off = vma->vm_pgoff;
-	unsigned long pfn;
-	int ret = -ENXIO;
-
-	if (!plat_device_is_coherent(dev))
-		addr = CAC_ADDR(addr);
-
-	pfn = page_to_pfn(virt_to_page((void *)addr));
-
-	if (attrs & DMA_ATTR_WRITE_COMBINE)
-		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	else
-		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
-		return ret;
-
-	if (off < count && user_count <= (count - off)) {
-		ret = remap_pfn_range(vma, vma->vm_start,
-				      pfn + off,
-				      user_count << PAGE_SHIFT,
-				      vma->vm_page_prot);
-	}
-
-	return ret;
-}
-
-static inline void __dma_sync_virtual(void *addr, size_t size,
-	enum dma_data_direction direction)
-{
-	switch (direction) {
-	case DMA_TO_DEVICE:
-		dma_cache_wback((unsigned long)addr, size);
-		break;
-
-	case DMA_FROM_DEVICE:
-		dma_cache_inv((unsigned long)addr, size);
-		break;
-
-	case DMA_BIDIRECTIONAL:
-		dma_cache_wback_inv((unsigned long)addr, size);
-		break;
-
-	default:
-		BUG();
-	}
-}
-
-/*
- * A single sg entry may refer to multiple physically contiguous
- * pages. But we still need to process highmem pages individually.
- * If highmem is not configured then the bulk of this loop gets
- * optimized out.
- */
-static inline void __dma_sync(struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction)
-{
-	size_t left = size;
-
-	do {
-		size_t len = left;
-
-		if (PageHighMem(page)) {
-			void *addr;
-
-			if (offset + len > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset >> PAGE_SHIFT;
-					offset &= ~PAGE_MASK;
-				}
-				len = PAGE_SIZE - offset;
-			}
-
-			addr = kmap_atomic(page);
-			__dma_sync_virtual(addr + offset, len, direction);
-			kunmap_atomic(addr);
-		} else
-			__dma_sync_virtual(page_address(page) + offset,
-					   size, direction);
-		offset = 0;
-		page++;
-		left -= len;
-	} while (left);
-}
-
-static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction, unsigned long attrs)
-{
-	if (cpu_needs_post_dma_flush(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		__dma_sync(dma_addr_to_page(dev, dma_addr),
-			   dma_addr & ~PAGE_MASK, size, direction);
-	plat_post_dma_flush(dev);
-	plat_unmap_dma_mem(dev, dma_addr, size, direction);
-}
-
-static int mips_dma_map_sg(struct device *dev, struct scatterlist *sglist,
-	int nents, enum dma_data_direction direction, unsigned long attrs)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nents, i) {
-		if (!plat_device_is_coherent(dev) &&
-		    !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-#ifdef CONFIG_NEED_SG_DMA_LENGTH
-		sg->dma_length = sg->length;
-#endif
-		sg->dma_address = plat_map_dma_mem_page(dev, sg_page(sg)) +
-				  sg->offset;
-	}
-
-	return nents;
-}
-
-static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	if (!plat_device_is_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		__dma_sync(page, offset, size, direction);
-
-	return plat_map_dma_mem_page(dev, page) + offset;
-}
-
-static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
-	int nhwentries, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nhwentries, i) {
-		if (!plat_device_is_coherent(dev) &&
-		    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
-		    direction != DMA_TO_DEVICE)
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-		plat_unmap_dma_mem(dev, sg->dma_address, sg->length, direction);
-	}
-}
-
-static void mips_dma_sync_single_for_cpu(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	if (cpu_needs_post_dma_flush(dev))
-		__dma_sync(dma_addr_to_page(dev, dma_handle),
-			   dma_handle & ~PAGE_MASK, size, direction);
-	plat_post_dma_flush(dev);
-}
-
-static void mips_dma_sync_single_for_device(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	if (!plat_device_is_coherent(dev))
-		__dma_sync(dma_addr_to_page(dev, dma_handle),
-			   dma_handle & ~PAGE_MASK, size, direction);
-}
-
-static void mips_dma_sync_sg_for_cpu(struct device *dev,
-	struct scatterlist *sglist, int nelems,
-	enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	if (cpu_needs_post_dma_flush(dev)) {
-		for_each_sg(sglist, sg, nelems, i) {
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-		}
-	}
-	plat_post_dma_flush(dev);
-}
-
-static void mips_dma_sync_sg_for_device(struct device *dev,
-	struct scatterlist *sglist, int nelems,
-	enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	if (!plat_device_is_coherent(dev)) {
-		for_each_sg(sglist, sg, nelems, i) {
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-		}
-	}
-}
-
-static int mips_dma_supported(struct device *dev, u64 mask)
-{
-	return plat_dma_supported(dev, mask);
-}
-
-static void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-			 enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	if (!plat_device_is_coherent(dev))
-		__dma_sync_virtual(vaddr, size, direction);
-}
-
-const struct dma_map_ops mips_default_dma_map_ops = {
-	.alloc = mips_dma_alloc_coherent,
-	.free = mips_dma_free_coherent,
-	.mmap = mips_dma_mmap,
-	.map_page = mips_dma_map_page,
-	.unmap_page = mips_dma_unmap_page,
-	.map_sg = mips_dma_map_sg,
-	.unmap_sg = mips_dma_unmap_sg,
-	.sync_single_for_cpu = mips_dma_sync_single_for_cpu,
-	.sync_single_for_device = mips_dma_sync_single_for_device,
-	.sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
-	.sync_sg_for_device = mips_dma_sync_sg_for_device,
-	.dma_supported = mips_dma_supported,
-	.cache_sync = mips_dma_cache_sync,
-};
-EXPORT_SYMBOL(mips_default_dma_map_ops);
-- 
2.17.0

[PATCH 24/25] MIPS: remove the old dma-default implementation

[Christoph Hellwig]

Now unused.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |   5 +-
 arch/mips/include/asm/dma-mapping.h           |   3 -
 .../include/asm/mach-generic/dma-coherence.h  |  73 ----
 arch/mips/mm/Makefile                         |   1 -
 arch/mips/mm/dma-default.c                    | 379 ------------------
 5 files changed, 1 insertion(+), 460 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-generic/dma-coherence.h
 delete mode 100644 arch/mips/mm/dma-default.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9ac3c6260b68..ad5a542bf094 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -72,9 +72,6 @@ config MIPS
 	select SYSCTL_EXCEPTION_TRACE
 	select VIRT_TO_BUS
 
-config MIPS_DMA_DEFAULT
-	bool
-
 menu "Machine selection"
 
 choice
@@ -1113,7 +1110,7 @@ config DMA_NONCOHERENT
 	select NEED_DMA_MAP_STATE
 	select DMA_NONCOHERENT_MMAP
 	select DMA_NONCOHERENT_CACHE_SYNC
-	select DMA_NONCOHERENT_OPS if !MIPS_DMA_DEFAULT
+	select DMA_NONCOHERENT_OPS
 
 config SYS_HAS_EARLY_PRINTK
 	bool
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index caf97f739897..143250986e17 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -11,7 +11,6 @@
 #endif
 
 extern const struct dma_map_ops jazz_dma_ops;
-extern const struct dma_map_ops mips_default_dma_map_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
 static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
@@ -20,8 +19,6 @@ static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
 	return &jazz_dma_ops;
 #elif defined(CONFIG_SWIOTLB)
 	return &mips_swiotlb_ops;
-#elif defined(CONFIG_MIPS_DMA_DEFAULT)
-	return &mips_default_dma_map_ops;
 #elif defined(CONFIG_DMA_NONCOHERENT_OPS)
 	return &dma_noncoherent_ops;
 #else
diff --git a/arch/mips/include/asm/mach-generic/dma-coherence.h b/arch/mips/include/asm/mach-generic/dma-coherence.h
deleted file mode 100644
index 8ad7a40ca786..000000000000
--- a/arch/mips/include/asm/mach-generic/dma-coherence.h
+++ /dev/null
@@ -1,73 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006  Ralf Baechle <ralf@linux-mips.org>
- *
- */
-#ifndef __ASM_MACH_GENERIC_DMA_COHERENCE_H
-#define __ASM_MACH_GENERIC_DMA_COHERENCE_H
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-	size_t size)
-{
-	return virt_to_phys(addr);
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-	struct page *page)
-{
-	return page_to_phys(page);
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return dma_addr;
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-#ifdef CONFIG_DMA_PERDEV_COHERENT
-	return dev->archdata.dma_coherent;
-#else
-	switch (coherentio) {
-	default:
-	case IO_COHERENCE_DEFAULT:
-		return hw_coherentio;
-	case IO_COHERENCE_ENABLED:
-		return 1;
-	case IO_COHERENCE_DISABLED:
-		return 0;
-	}
-#endif
-}
-
-#ifndef plat_post_dma_flush
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-#endif
-
-#endif /* __ASM_MACH_GENERIC_DMA_COHERENCE_H */
diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile
index c6146c3805dc..6922f393af19 100644
--- a/arch/mips/mm/Makefile
+++ b/arch/mips/mm/Makefile
@@ -17,7 +17,6 @@ obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o
 obj-$(CONFIG_HIGHMEM)		+= highmem.o
 obj-$(CONFIG_HUGETLB_PAGE)	+= hugetlbpage.o
-obj-$(CONFIG_MIPS_DMA_DEFAULT)	+= dma-default.o
 obj-$(CONFIG_DMA_NONCOHERENT)	+= dma-noncoherent.o
 obj-$(CONFIG_SWIOTLB)		+= dma-swiotlb.o
 
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
deleted file mode 100644
index 10b56e8a2076..000000000000
--- a/arch/mips/mm/dma-default.c
+++ /dev/null
@@ -1,379 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000  Ani Joshi <ajoshi@unixbox.com>
- * Copyright (C) 2000, 2001, 06	 Ralf Baechle <ralf@linux-mips.org>
- * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
- */
-
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/export.h>
-#include <linux/scatterlist.h>
-#include <linux/string.h>
-#include <linux/gfp.h>
-#include <linux/highmem.h>
-#include <linux/dma-contiguous.h>
-
-#include <asm/cache.h>
-#include <asm/cpu-type.h>
-#include <asm/io.h>
-
-#include <dma-coherence.h>
-
-static inline struct page *dma_addr_to_page(struct device *dev,
-	dma_addr_t dma_addr)
-{
-	return pfn_to_page(
-		plat_dma_addr_to_phys(dev, dma_addr) >> PAGE_SHIFT);
-}
-
-/*
- * The affected CPUs below in 'cpu_needs_post_dma_flush()' can
- * speculatively fill random cachelines with stale data at any time,
- * requiring an extra flush post-DMA.
- *
- * Warning on the terminology - Linux calls an uncached area coherent;
- * MIPS terminology calls memory areas with hardware maintained coherency
- * coherent.
- *
- * Note that the R14000 and R16000 should also be checked for in this
- * condition.  However this function is only called on non-I/O-coherent
- * systems and only the R10000 and R12000 are used in such systems, the
- * SGI IP28 Indigo² rsp. SGI IP32 aka O2.
- */
-static inline bool cpu_needs_post_dma_flush(struct device *dev)
-{
-	if (plat_device_is_coherent(dev))
-		return false;
-
-	switch (boot_cpu_type()) {
-	case CPU_R10000:
-	case CPU_R12000:
-	case CPU_BMIPS5000:
-		return true;
-
-	default:
-		/*
-		 * Presence of MAARs suggests that the CPU supports
-		 * speculatively prefetching data, and therefore requires
-		 * the post-DMA flush/invalidate.
-		 */
-		return cpu_has_maar;
-	}
-}
-
-static gfp_t massage_gfp_flags(const struct device *dev, gfp_t gfp)
-{
-	gfp_t dma_flag;
-
-#ifdef CONFIG_ISA
-	if (dev == NULL)
-		dma_flag = __GFP_DMA;
-	else
-#endif
-#if defined(CONFIG_ZONE_DMA32) && defined(CONFIG_ZONE_DMA)
-	     if (dev == NULL || dev->coherent_dma_mask < DMA_BIT_MASK(32))
-			dma_flag = __GFP_DMA;
-	else if (dev->coherent_dma_mask < DMA_BIT_MASK(64))
-			dma_flag = __GFP_DMA32;
-	else
-#endif
-#if defined(CONFIG_ZONE_DMA32) && !defined(CONFIG_ZONE_DMA)
-	     if (dev == NULL || dev->coherent_dma_mask < DMA_BIT_MASK(64))
-		dma_flag = __GFP_DMA32;
-	else
-#endif
-#if defined(CONFIG_ZONE_DMA) && !defined(CONFIG_ZONE_DMA32)
-	     if (dev == NULL ||
-		 dev->coherent_dma_mask < DMA_BIT_MASK(sizeof(phys_addr_t) * 8))
-		dma_flag = __GFP_DMA;
-	else
-#endif
-		dma_flag = 0;
-
-	/* Don't invoke OOM killer */
-	gfp |= __GFP_NORETRY;
-
-	return gfp | dma_flag;
-}
-
-static void *mips_dma_alloc_coherent(struct device *dev, size_t size,
-	dma_addr_t *dma_handle, gfp_t gfp, unsigned long attrs)
-{
-	void *ret;
-	struct page *page = NULL;
-	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-
-	gfp = massage_gfp_flags(dev, gfp);
-
-	if (IS_ENABLED(CONFIG_DMA_CMA) && gfpflags_allow_blocking(gfp))
-		page = dma_alloc_from_contiguous(dev, count, get_order(size),
-						 gfp);
-	if (!page)
-		page = alloc_pages(gfp, get_order(size));
-
-	if (!page)
-		return NULL;
-
-	ret = page_address(page);
-	memset(ret, 0, size);
-	*dma_handle = plat_map_dma_mem(dev, ret, size);
-	if (!(attrs & DMA_ATTR_NON_CONSISTENT) &&
-	    !plat_device_is_coherent(dev)) {
-		dma_cache_wback_inv((unsigned long) ret, size);
-		ret = UNCAC_ADDR(ret);
-	}
-
-	return ret;
-}
-
-static void mips_dma_free_coherent(struct device *dev, size_t size, void *vaddr,
-	dma_addr_t dma_handle, unsigned long attrs)
-{
-	unsigned long addr = (unsigned long) vaddr;
-	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	struct page *page = NULL;
-
-	plat_unmap_dma_mem(dev, dma_handle, size, DMA_BIDIRECTIONAL);
-
-	if (!(attrs & DMA_ATTR_NON_CONSISTENT) && !plat_device_is_coherent(dev))
-		addr = CAC_ADDR(addr);
-
-	page = virt_to_page((void *) addr);
-
-	if (!dma_release_from_contiguous(dev, page, count))
-		__free_pages(page, get_order(size));
-}
-
-static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
-	void *cpu_addr, dma_addr_t dma_addr, size_t size,
-	unsigned long attrs)
-{
-	unsigned long user_count = vma_pages(vma);
-	unsigned long count = PAGE_ALIGN(size) >> PAGE_SHIFT;
-	unsigned long addr = (unsigned long)cpu_addr;
-	unsigned long off = vma->vm_pgoff;
-	unsigned long pfn;
-	int ret = -ENXIO;
-
-	if (!plat_device_is_coherent(dev))
-		addr = CAC_ADDR(addr);
-
-	pfn = page_to_pfn(virt_to_page((void *)addr));
-
-	if (attrs & DMA_ATTR_WRITE_COMBINE)
-		vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-	else
-		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
-
-	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
-		return ret;
-
-	if (off < count && user_count <= (count - off)) {
-		ret = remap_pfn_range(vma, vma->vm_start,
-				      pfn + off,
-				      user_count << PAGE_SHIFT,
-				      vma->vm_page_prot);
-	}
-
-	return ret;
-}
-
-static inline void __dma_sync_virtual(void *addr, size_t size,
-	enum dma_data_direction direction)
-{
-	switch (direction) {
-	case DMA_TO_DEVICE:
-		dma_cache_wback((unsigned long)addr, size);
-		break;
-
-	case DMA_FROM_DEVICE:
-		dma_cache_inv((unsigned long)addr, size);
-		break;
-
-	case DMA_BIDIRECTIONAL:
-		dma_cache_wback_inv((unsigned long)addr, size);
-		break;
-
-	default:
-		BUG();
-	}
-}
-
-/*
- * A single sg entry may refer to multiple physically contiguous
- * pages. But we still need to process highmem pages individually.
- * If highmem is not configured then the bulk of this loop gets
- * optimized out.
- */
-static inline void __dma_sync(struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction)
-{
-	size_t left = size;
-
-	do {
-		size_t len = left;
-
-		if (PageHighMem(page)) {
-			void *addr;
-
-			if (offset + len > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset >> PAGE_SHIFT;
-					offset &= ~PAGE_MASK;
-				}
-				len = PAGE_SIZE - offset;
-			}
-
-			addr = kmap_atomic(page);
-			__dma_sync_virtual(addr + offset, len, direction);
-			kunmap_atomic(addr);
-		} else
-			__dma_sync_virtual(page_address(page) + offset,
-					   size, direction);
-		offset = 0;
-		page++;
-		left -= len;
-	} while (left);
-}
-
-static void mips_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction, unsigned long attrs)
-{
-	if (cpu_needs_post_dma_flush(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		__dma_sync(dma_addr_to_page(dev, dma_addr),
-			   dma_addr & ~PAGE_MASK, size, direction);
-	plat_post_dma_flush(dev);
-	plat_unmap_dma_mem(dev, dma_addr, size, direction);
-}
-
-static int mips_dma_map_sg(struct device *dev, struct scatterlist *sglist,
-	int nents, enum dma_data_direction direction, unsigned long attrs)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nents, i) {
-		if (!plat_device_is_coherent(dev) &&
-		    !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-#ifdef CONFIG_NEED_SG_DMA_LENGTH
-		sg->dma_length = sg->length;
-#endif
-		sg->dma_address = plat_map_dma_mem_page(dev, sg_page(sg)) +
-				  sg->offset;
-	}
-
-	return nents;
-}
-
-static dma_addr_t mips_dma_map_page(struct device *dev, struct page *page,
-	unsigned long offset, size_t size, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	if (!plat_device_is_coherent(dev) && !(attrs & DMA_ATTR_SKIP_CPU_SYNC))
-		__dma_sync(page, offset, size, direction);
-
-	return plat_map_dma_mem_page(dev, page) + offset;
-}
-
-static void mips_dma_unmap_sg(struct device *dev, struct scatterlist *sglist,
-	int nhwentries, enum dma_data_direction direction,
-	unsigned long attrs)
-{
-	int i;
-	struct scatterlist *sg;
-
-	for_each_sg(sglist, sg, nhwentries, i) {
-		if (!plat_device_is_coherent(dev) &&
-		    !(attrs & DMA_ATTR_SKIP_CPU_SYNC) &&
-		    direction != DMA_TO_DEVICE)
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-		plat_unmap_dma_mem(dev, sg->dma_address, sg->length, direction);
-	}
-}
-
-static void mips_dma_sync_single_for_cpu(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	if (cpu_needs_post_dma_flush(dev))
-		__dma_sync(dma_addr_to_page(dev, dma_handle),
-			   dma_handle & ~PAGE_MASK, size, direction);
-	plat_post_dma_flush(dev);
-}
-
-static void mips_dma_sync_single_for_device(struct device *dev,
-	dma_addr_t dma_handle, size_t size, enum dma_data_direction direction)
-{
-	if (!plat_device_is_coherent(dev))
-		__dma_sync(dma_addr_to_page(dev, dma_handle),
-			   dma_handle & ~PAGE_MASK, size, direction);
-}
-
-static void mips_dma_sync_sg_for_cpu(struct device *dev,
-	struct scatterlist *sglist, int nelems,
-	enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	if (cpu_needs_post_dma_flush(dev)) {
-		for_each_sg(sglist, sg, nelems, i) {
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-		}
-	}
-	plat_post_dma_flush(dev);
-}
-
-static void mips_dma_sync_sg_for_device(struct device *dev,
-	struct scatterlist *sglist, int nelems,
-	enum dma_data_direction direction)
-{
-	int i;
-	struct scatterlist *sg;
-
-	if (!plat_device_is_coherent(dev)) {
-		for_each_sg(sglist, sg, nelems, i) {
-			__dma_sync(sg_page(sg), sg->offset, sg->length,
-				   direction);
-		}
-	}
-}
-
-static int mips_dma_supported(struct device *dev, u64 mask)
-{
-	return plat_dma_supported(dev, mask);
-}
-
-static void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
-			 enum dma_data_direction direction)
-{
-	BUG_ON(direction == DMA_NONE);
-
-	if (!plat_device_is_coherent(dev))
-		__dma_sync_virtual(vaddr, size, direction);
-}
-
-const struct dma_map_ops mips_default_dma_map_ops = {
-	.alloc = mips_dma_alloc_coherent,
-	.free = mips_dma_free_coherent,
-	.mmap = mips_dma_mmap,
-	.map_page = mips_dma_map_page,
-	.unmap_page = mips_dma_unmap_page,
-	.map_sg = mips_dma_map_sg,
-	.unmap_sg = mips_dma_unmap_sg,
-	.sync_single_for_cpu = mips_dma_sync_single_for_cpu,
-	.sync_single_for_device = mips_dma_sync_single_for_device,
-	.sync_sg_for_cpu = mips_dma_sync_sg_for_cpu,
-	.sync_sg_for_device = mips_dma_sync_sg_for_device,
-	.dma_supported = mips_dma_supported,
-	.cache_sync = mips_dma_cache_sync,
-};
-EXPORT_SYMBOL(mips_default_dma_map_ops);
-- 
2.17.0

_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

[PATCH 25/25] MIPS: remove unneeded includes from dma-mapping.h

[Christoph Hellwig]

Keep this file as light as possible as it gets pulled into every
driver using dma mapping APIs.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/include/asm/dma-mapping.h | 8 --------
 arch/mips/mti-malta/malta-setup.c   | 1 +
 2 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 143250986e17..1c6e0c8ef483 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -2,14 +2,6 @@
 #ifndef _ASM_DMA_MAPPING_H
 #define _ASM_DMA_MAPPING_H
 
-#include <linux/scatterlist.h>
-#include <asm/dma-coherence.h>
-#include <asm/cache.h>
-
-#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
-#include <dma-coherence.h>
-#endif
-
 extern const struct dma_map_ops jazz_dma_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 4d5cdfeee3db..7cb7d5a42087 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -26,6 +26,7 @@
 #include <linux/screen_info.h>
 #include <linux/time.h>
 
+#include <asm/dma-coherence.h>
 #include <asm/fw/fw.h>
 #include <asm/mach-malta/malta-dtshim.h>
 #include <asm/mips-cps.h>
-- 
2.17.0

[PATCH 25/25] MIPS: remove unneeded includes from dma-mapping.h

[Christoph Hellwig]

Keep this file as light as possible as it gets pulled into every
driver using dma mapping APIs.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/include/asm/dma-mapping.h | 8 --------
 arch/mips/mti-malta/malta-setup.c   | 1 +
 2 files changed, 1 insertion(+), 8 deletions(-)

diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index 143250986e17..1c6e0c8ef483 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -2,14 +2,6 @@
 #ifndef _ASM_DMA_MAPPING_H
 #define _ASM_DMA_MAPPING_H
 
-#include <linux/scatterlist.h>
-#include <asm/dma-coherence.h>
-#include <asm/cache.h>
-
-#ifndef CONFIG_SGI_IP27 /* Kludge to fix 2.6.39 build for IP27 */
-#include <dma-coherence.h>
-#endif
-
 extern const struct dma_map_ops jazz_dma_ops;
 extern const struct dma_map_ops mips_swiotlb_ops;
 
diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c
index 4d5cdfeee3db..7cb7d5a42087 100644
--- a/arch/mips/mti-malta/malta-setup.c
+++ b/arch/mips/mti-malta/malta-setup.c
@@ -26,6 +26,7 @@
 #include <linux/screen_info.h>
 #include <linux/time.h>
 
+#include <asm/dma-coherence.h>
 #include <asm/fw/fw.h>
 #include <asm/mach-malta/malta-dtshim.h>
 #include <asm/mips-cps.h>
-- 
2.17.0

Re: [PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Paul Burton]

Hi Christoph,

For patches 1-4:

  Reviewed-by: Paul Burton <paul.burton@mips.com>

Comment below for this patch though.

On Fri, May 25, 2018 at 11:20:51AM +0200, Christoph Hellwig wrote:
> diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
> index e5d00c79bd26..1e68636c9137 100644
> --- a/arch/mips/cavium-octeon/dma-octeon.c
> +++ b/arch/mips/cavium-octeon/dma-octeon.c
> @@ -23,10 +23,16 @@
>  #include <asm/octeon/octeon.h>
>  
>  #ifdef CONFIG_PCI
> +#include <linux/pci.h>
>  #include <asm/octeon/pci-octeon.h>
>  #include <asm/octeon/cvmx-npi-defs.h>
>  #include <asm/octeon/cvmx-pci-defs.h>
>  
> +struct octeon_dma_map_ops {
> +	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> +	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
>  static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr)
>  {
>  	if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE))
> @@ -43,6 +49,11 @@ static phys_addr_t octeon_hole_dma_to_phys(dma_addr_t daddr)
>  		return daddr;
>  }
>  
> +static const struct octeon_dma_map_ops octeon_gen2_ops = {
> +	.phys_to_dma	= octeon_hole_phys_to_dma,
> +	.dma_to_phys	= octeon_hole_dma_to_phys,
> +};

These are pointers to functions of the wrong type, right? phys_to_dma &
dma_to_phys have the struct device * argument but the octeon_hole_*
functions do not. I'd expect we either need to restore the
octeon_gen2_* wrappers that you remove below or change the definition of
the octeon_hole_* functions.

Thanks,
    Paul

>  static dma_addr_t octeon_gen1_phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
> @@ -60,15 +71,10 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
>  	return daddr;
>  }
>  
> -static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
> -{
> -	return octeon_hole_phys_to_dma(paddr);
> -}
> -
> -static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
> -{
> -	return octeon_hole_dma_to_phys(daddr);
> -}

Re: [PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Paul Burton]

Hi Christoph,

For patches 1-4:

  Reviewed-by: Paul Burton <paul.burton@mips.com>

Comment below for this patch though.

On Fri, May 25, 2018 at 11:20:51AM +0200, Christoph Hellwig wrote:
> diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
> index e5d00c79bd26..1e68636c9137 100644
> --- a/arch/mips/cavium-octeon/dma-octeon.c
> +++ b/arch/mips/cavium-octeon/dma-octeon.c
> @@ -23,10 +23,16 @@
>  #include <asm/octeon/octeon.h>
>  
>  #ifdef CONFIG_PCI
> +#include <linux/pci.h>
>  #include <asm/octeon/pci-octeon.h>
>  #include <asm/octeon/cvmx-npi-defs.h>
>  #include <asm/octeon/cvmx-pci-defs.h>
>  
> +struct octeon_dma_map_ops {
> +	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> +	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
>  static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr)
>  {
>  	if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE))
> @@ -43,6 +49,11 @@ static phys_addr_t octeon_hole_dma_to_phys(dma_addr_t daddr)
>  		return daddr;
>  }
>  
> +static const struct octeon_dma_map_ops octeon_gen2_ops = {
> +	.phys_to_dma	= octeon_hole_phys_to_dma,
> +	.dma_to_phys	= octeon_hole_dma_to_phys,
> +};

These are pointers to functions of the wrong type, right? phys_to_dma &
dma_to_phys have the struct device * argument but the octeon_hole_*
functions do not. I'd expect we either need to restore the
octeon_gen2_* wrappers that you remove below or change the definition of
the octeon_hole_* functions.

Thanks,
    Paul

>  static dma_addr_t octeon_gen1_phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
> @@ -60,15 +71,10 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
>  	return daddr;
>  }
>  
> -static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
> -{
> -	return octeon_hole_phys_to_dma(paddr);
> -}
> -
> -static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
> -{
> -	return octeon_hole_dma_to_phys(daddr);
> -}

Re: [PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Paul Burton]

Hi Christoph,

For patches 1-4:

  Reviewed-by: Paul Burton <paul.burton-8NJIiSa5LzA@public.gmane.org>

Comment below for this patch though.

On Fri, May 25, 2018 at 11:20:51AM +0200, Christoph Hellwig wrote:
> diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c
> index e5d00c79bd26..1e68636c9137 100644
> --- a/arch/mips/cavium-octeon/dma-octeon.c
> +++ b/arch/mips/cavium-octeon/dma-octeon.c
> @@ -23,10 +23,16 @@
>  #include <asm/octeon/octeon.h>
>  
>  #ifdef CONFIG_PCI
> +#include <linux/pci.h>
>  #include <asm/octeon/pci-octeon.h>
>  #include <asm/octeon/cvmx-npi-defs.h>
>  #include <asm/octeon/cvmx-pci-defs.h>
>  
> +struct octeon_dma_map_ops {
> +	dma_addr_t (*phys_to_dma)(struct device *dev, phys_addr_t paddr);
> +	phys_addr_t (*dma_to_phys)(struct device *dev, dma_addr_t daddr);
> +};
> +
>  static dma_addr_t octeon_hole_phys_to_dma(phys_addr_t paddr)
>  {
>  	if (paddr >= CVMX_PCIE_BAR1_PHYS_BASE && paddr < (CVMX_PCIE_BAR1_PHYS_BASE + CVMX_PCIE_BAR1_PHYS_SIZE))
> @@ -43,6 +49,11 @@ static phys_addr_t octeon_hole_dma_to_phys(dma_addr_t daddr)
>  		return daddr;
>  }
>  
> +static const struct octeon_dma_map_ops octeon_gen2_ops = {
> +	.phys_to_dma	= octeon_hole_phys_to_dma,
> +	.dma_to_phys	= octeon_hole_dma_to_phys,
> +};

These are pointers to functions of the wrong type, right? phys_to_dma &
dma_to_phys have the struct device * argument but the octeon_hole_*
functions do not. I'd expect we either need to restore the
octeon_gen2_* wrappers that you remove below or change the definition of
the octeon_hole_* functions.

Thanks,
    Paul

>  static dma_addr_t octeon_gen1_phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	if (paddr >= 0x410000000ull && paddr < 0x420000000ull)
> @@ -60,15 +71,10 @@ static phys_addr_t octeon_gen1_dma_to_phys(struct device *dev, dma_addr_t daddr)
>  	return daddr;
>  }
>  
> -static dma_addr_t octeon_gen2_phys_to_dma(struct device *dev, phys_addr_t paddr)
> -{
> -	return octeon_hole_phys_to_dma(paddr);
> -}
> -
> -static phys_addr_t octeon_gen2_dma_to_phys(struct device *dev, dma_addr_t daddr)
> -{
> -	return octeon_hole_dma_to_phys(daddr);
> -}

Re: [PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Christoph Hellwig]

On Wed, May 30, 2018 at 04:25:52PM -0700, Paul Burton wrote:
> > +static const struct octeon_dma_map_ops octeon_gen2_ops = {
> > +	.phys_to_dma	= octeon_hole_phys_to_dma,
> > +	.dma_to_phys	= octeon_hole_dma_to_phys,
> > +};
> 
> These are pointers to functions of the wrong type, right? phys_to_dma &
> dma_to_phys have the struct device * argument but the octeon_hole_*
> functions do not. I'd expect we either need to restore the
> octeon_gen2_* wrappers that you remove below or change the definition of
> the octeon_hole_* functions.

That is true.  I have no idea how that passed the buildbot, which
reported all kinds of other issues in the original octeon conversion.

I'll fix this for the next respin.

Re: [PATCH 05/25] MIPS: Octeon: refactor swiotlb code

[Christoph Hellwig]

On Wed, May 30, 2018 at 04:25:52PM -0700, Paul Burton wrote:
> > +static const struct octeon_dma_map_ops octeon_gen2_ops = {
> > +	.phys_to_dma	= octeon_hole_phys_to_dma,
> > +	.dma_to_phys	= octeon_hole_dma_to_phys,
> > +};
> 
> These are pointers to functions of the wrong type, right? phys_to_dma &
> dma_to_phys have the struct device * argument but the octeon_hole_*
> functions do not. I'd expect we either need to restore the
> octeon_gen2_* wrappers that you remove below or change the definition of
> the octeon_hole_* functions.

That is true.  I have no idea how that passed the buildbot, which
reported all kinds of other issues in the original octeon conversion.

I'll fix this for the next respin.

Re: [PATCH 06/25] MIPS: loongson: remove loongson_dma_supported

[Paul Burton]

Hi Christoph,

On Fri, May 25, 2018 at 11:20:52AM +0200, Christoph Hellwig wrote:
> swiotlb_dma_supported will always return true for the a mask
> large enough to be covered by wired up physical address, so this
> function is pointless.

Shouldn't this be "large enough to cover all wired up physical
addresses"? Or maybe even more correctly "large enough to cover all DMA
addresses that might be used"?

Also, there's a spurious "the" on the first line.

> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/mips/loongson64/common/dma-swiotlb.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
> index 6a739f8ae110..a5e50f2ec301 100644
> --- a/arch/mips/loongson64/common/dma-swiotlb.c
> +++ b/arch/mips/loongson64/common/dma-swiotlb.c
> @@ -56,13 +56,6 @@ static void loongson_dma_sync_sg_for_device(struct device *dev,
>  	mb();
>  }
>  
> -static int loongson_dma_supported(struct device *dev, u64 mask)
> -{
> -	if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits))
> -		return 0;

The comparison here will only evaluate true (indicating that DMA is not
supported) if the mask is larger than that supported by the system,
right? Therefore is this not essentially a check that the mask is
appropriately small, whilst swiotlb_dma_supported() checks that the mask
is appropriately large?

I'm struggling to understand how it follows that this function is
pointless given the behaviour of swiotlb_dma_supported(), which is what
the commit message suggests.

Thanks,
    Paul

> -	return swiotlb_dma_supported(dev, mask);
> -}
> -
>  dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	long nid;
> @@ -99,7 +92,7 @@ static const struct dma_map_ops loongson_dma_map_ops = {
>  	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
>  	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
>  	.mapping_error = swiotlb_dma_mapping_error,
> -	.dma_supported = loongson_dma_supported,
> +	.dma_supported = swiotlb_dma_supported,
>  };
>  
>  void __init plat_swiotlb_setup(void)
> -- 
> 2.17.0
> 
> 

Re: [PATCH 06/25] MIPS: loongson: remove loongson_dma_supported

[Paul Burton]

Hi Christoph,

On Fri, May 25, 2018 at 11:20:52AM +0200, Christoph Hellwig wrote:
> swiotlb_dma_supported will always return true for the a mask
> large enough to be covered by wired up physical address, so this
> function is pointless.

Shouldn't this be "large enough to cover all wired up physical
addresses"? Or maybe even more correctly "large enough to cover all DMA
addresses that might be used"?

Also, there's a spurious "the" on the first line.

> Signed-off-by: Christoph Hellwig <hch@lst.de>
> ---
>  arch/mips/loongson64/common/dma-swiotlb.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
> index 6a739f8ae110..a5e50f2ec301 100644
> --- a/arch/mips/loongson64/common/dma-swiotlb.c
> +++ b/arch/mips/loongson64/common/dma-swiotlb.c
> @@ -56,13 +56,6 @@ static void loongson_dma_sync_sg_for_device(struct device *dev,
>  	mb();
>  }
>  
> -static int loongson_dma_supported(struct device *dev, u64 mask)
> -{
> -	if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits))
> -		return 0;

The comparison here will only evaluate true (indicating that DMA is not
supported) if the mask is larger than that supported by the system,
right? Therefore is this not essentially a check that the mask is
appropriately small, whilst swiotlb_dma_supported() checks that the mask
is appropriately large?

I'm struggling to understand how it follows that this function is
pointless given the behaviour of swiotlb_dma_supported(), which is what
the commit message suggests.

Thanks,
    Paul

> -	return swiotlb_dma_supported(dev, mask);
> -}
> -
>  dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	long nid;
> @@ -99,7 +92,7 @@ static const struct dma_map_ops loongson_dma_map_ops = {
>  	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
>  	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
>  	.mapping_error = swiotlb_dma_mapping_error,
> -	.dma_supported = loongson_dma_supported,
> +	.dma_supported = swiotlb_dma_supported,
>  };
>  
>  void __init plat_swiotlb_setup(void)
> -- 
> 2.17.0
> 
> 

Re: [PATCH 06/25] MIPS: loongson: remove loongson_dma_supported

[Paul Burton]

Hi Christoph,

On Fri, May 25, 2018 at 11:20:52AM +0200, Christoph Hellwig wrote:
> swiotlb_dma_supported will always return true for the a mask
> large enough to be covered by wired up physical address, so this
> function is pointless.

Shouldn't this be "large enough to cover all wired up physical
addresses"? Or maybe even more correctly "large enough to cover all DMA
addresses that might be used"?

Also, there's a spurious "the" on the first line.

> Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
> ---
>  arch/mips/loongson64/common/dma-swiotlb.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)
> 
> diff --git a/arch/mips/loongson64/common/dma-swiotlb.c b/arch/mips/loongson64/common/dma-swiotlb.c
> index 6a739f8ae110..a5e50f2ec301 100644
> --- a/arch/mips/loongson64/common/dma-swiotlb.c
> +++ b/arch/mips/loongson64/common/dma-swiotlb.c
> @@ -56,13 +56,6 @@ static void loongson_dma_sync_sg_for_device(struct device *dev,
>  	mb();
>  }
>  
> -static int loongson_dma_supported(struct device *dev, u64 mask)
> -{
> -	if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits))
> -		return 0;

The comparison here will only evaluate true (indicating that DMA is not
supported) if the mask is larger than that supported by the system,
right? Therefore is this not essentially a check that the mask is
appropriately small, whilst swiotlb_dma_supported() checks that the mask
is appropriately large?

I'm struggling to understand how it follows that this function is
pointless given the behaviour of swiotlb_dma_supported(), which is what
the commit message suggests.

Thanks,
    Paul

> -	return swiotlb_dma_supported(dev, mask);
> -}
> -
>  dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
>  {
>  	long nid;
> @@ -99,7 +92,7 @@ static const struct dma_map_ops loongson_dma_map_ops = {
>  	.sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
>  	.sync_sg_for_device = loongson_dma_sync_sg_for_device,
>  	.mapping_error = swiotlb_dma_mapping_error,
> -	.dma_supported = loongson_dma_supported,
> +	.dma_supported = swiotlb_dma_supported,
>  };
>  
>  void __init plat_swiotlb_setup(void)
> -- 
> 2.17.0
> 
> 

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Maciej W. Rozycki]

On Fri, 25 May 2018, Christoph Hellwig wrote:

> Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
> address translations stubs directly to the loongson-3 code, and remove
> a few Kconfig indirections.

 SiByte should too though, at least for those boards, such as the SWARM 
and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
plugged).

 I never got to have the wiring of swiotlb completed for these boards as 
I got distracted with getting set up to debug a DRAM controller issue 
observed in the form of memory data corruption with the banks fully 
populated (which might have to do something with the parameters of bank 
interleaving enabled in such a configuration, as replacing a single 
module with a smaller-sized one and therefore disabling interleaving, 
which can only work with all modules being the same size, makes the 
problem go away).

 FWIW,

  Maciej

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Maciej W. Rozycki]

On Fri, 25 May 2018, Christoph Hellwig wrote:

> Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
> address translations stubs directly to the loongson-3 code, and remove
> a few Kconfig indirections.

 SiByte should too though, at least for those boards, such as the SWARM 
and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
plugged).

 I never got to have the wiring of swiotlb completed for these boards as 
I got distracted with getting set up to debug a DRAM controller issue 
observed in the form of memory data corruption with the banks fully 
populated (which might have to do something with the parameters of bank 
interleaving enabled in such a configuration, as replacing a single 
module with a smaller-sized one and therefore disabling interleaving, 
which can only work with all modules being the same size, makes the 
problem go away).

 FWIW,

  Maciej

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Maciej W. Rozycki]

On Fri, 25 May 2018, Christoph Hellwig wrote:

> Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
> address translations stubs directly to the loongson-3 code, and remove
> a few Kconfig indirections.

 SiByte should too though, at least for those boards, such as the SWARM 
and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
plugged).

 I never got to have the wiring of swiotlb completed for these boards as 
I got distracted with getting set up to debug a DRAM controller issue 
observed in the form of memory data corruption with the banks fully 
populated (which might have to do something with the parameters of bank 
interleaving enabled in such a configuration, as replacing a single 
module with a smaller-sized one and therefore disabling interleaving, 
which can only work with all modules being the same size, makes the 
problem go away).

 FWIW,

  Maciej

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Christoph Hellwig]

On Wed, Jul 11, 2018 at 01:46:31PM +0100, Maciej W. Rozycki wrote:
> > Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
> > address translations stubs directly to the loongson-3 code, and remove
> > a few Kconfig indirections.
> 
>  SiByte should too though, at least for those boards, such as the SWARM 
> and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
> plugged).

Only in this case refers to loonson boards.

>  I never got to have the wiring of swiotlb completed for these boards as 
> I got distracted with getting set up to debug a DRAM controller issue 
> observed in the form of memory data corruption with the banks fully 
> populated (which might have to do something with the parameters of bank 
> interleaving enabled in such a configuration, as replacing a single 
> module with a smaller-sized one and therefore disabling interleaving, 
> which can only work with all modules being the same size, makes the 
> problem go away).

After this series enabling swiotlb for another board is trivial as all
the code has been consolidated.  Just select SWIOTLB and add a call to
swiotlb_init to the board setup code.

> 
>  FWIW,
> 
>   Maciej
---end quoted text---

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Christoph Hellwig]

On Wed, Jul 11, 2018 at 01:46:31PM +0100, Maciej W. Rozycki wrote:
> > Only loongson-3 is DMA coherent and uses swiotlb.  So move the dma
> > address translations stubs directly to the loongson-3 code, and remove
> > a few Kconfig indirections.
> 
>  SiByte should too though, at least for those boards, such as the SWARM 
> and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
> plugged).

Only in this case refers to loonson boards.

>  I never got to have the wiring of swiotlb completed for these boards as 
> I got distracted with getting set up to debug a DRAM controller issue 
> observed in the form of memory data corruption with the banks fully 
> populated (which might have to do something with the parameters of bank 
> interleaving enabled in such a configuration, as replacing a single 
> module with a smaller-sized one and therefore disabling interleaving, 
> which can only work with all modules being the same size, makes the 
> problem go away).

After this series enabling swiotlb for another board is trivial as all
the code has been consolidated.  Just select SWIOTLB and add a call to
swiotlb_init to the board setup code.

> 
>  FWIW,
> 
>   Maciej
---end quoted text---

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Maciej W. Rozycki]

On Wed, 11 Jul 2018, Christoph Hellwig wrote:

> >  SiByte should too though, at least for those boards, such as the SWARM 
> > and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
> > plugged).
> 
> Only in this case refers to loonson boards.

 Right!

> >  I never got to have the wiring of swiotlb completed for these boards as 
> > I got distracted with getting set up to debug a DRAM controller issue 
> > observed in the form of memory data corruption with the banks fully 
> > populated (which might have to do something with the parameters of bank 
> > interleaving enabled in such a configuration, as replacing a single 
> > module with a smaller-sized one and therefore disabling interleaving, 
> > which can only work with all modules being the same size, makes the 
> > problem go away).
> 
> After this series enabling swiotlb for another board is trivial as all
> the code has been consolidated.  Just select SWIOTLB and add a call to
> swiotlb_init to the board setup code.

 I had that feeling too, thanks for confirming.  And for doing this work 
in the first place!

  Maciej

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Maciej W. Rozycki]

On Wed, 11 Jul 2018, Christoph Hellwig wrote:

> >  SiByte should too though, at least for those boards, such as the SWARM 
> > and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
> > plugged).
> 
> Only in this case refers to loonson boards.

 Right!

> >  I never got to have the wiring of swiotlb completed for these boards as 
> > I got distracted with getting set up to debug a DRAM controller issue 
> > observed in the form of memory data corruption with the banks fully 
> > populated (which might have to do something with the parameters of bank 
> > interleaving enabled in such a configuration, as replacing a single 
> > module with a smaller-sized one and therefore disabling interleaving, 
> > which can only work with all modules being the same size, makes the 
> > problem go away).
> 
> After this series enabling swiotlb for another board is trivial as all
> the code has been consolidated.  Just select SWIOTLB and add a call to
> swiotlb_init to the board setup code.

 I had that feeling too, thanks for confirming.  And for doing this work 
in the first place!

  Maciej

Re: [PATCH 12/25] MIPS: loongson: untangle dma implementations

[Maciej W. Rozycki]

On Wed, 11 Jul 2018, Christoph Hellwig wrote:

> >  SiByte should too though, at least for those boards, such as the SWARM 
> > and the BigSur, that can have DRAM over 4GiB (and 32-bit PCI devices 
> > plugged).
> 
> Only in this case refers to loonson boards.

 Right!

> >  I never got to have the wiring of swiotlb completed for these boards as 
> > I got distracted with getting set up to debug a DRAM controller issue 
> > observed in the form of memory data corruption with the banks fully 
> > populated (which might have to do something with the parameters of bank 
> > interleaving enabled in such a configuration, as replacing a single 
> > module with a smaller-sized one and therefore disabling interleaving, 
> > which can only work with all modules being the same size, makes the 
> > problem go away).
> 
> After this series enabling swiotlb for another board is trivial as all
> the code has been consolidated.  Just select SWIOTLB and add a call to
> swiotlb_init to the board setup code.

 I had that feeling too, thanks for confirming.  And for doing this work 
in the first place!

  Maciej

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Paul Burton]

Hi Christoph,

On Tue, Jul 10, 2018 at 02:35:18PM +0200, Christoph Hellwig wrote:
> On Wed, Jun 20, 2018 at 09:23:28AM +0200, Christoph Hellwig wrote:
> > No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
> > the other 0x7fffffff.
> > 
> > Below is the minimal fixup that keeps things as much as it was before.
> 
> IS the rest of the series now ok with you?  Anything else I should
> update?

The rest looked good - I applied the series to mips-next & it's been
sitting in linux-next for a couple of weeks now. Apologies it looks like
I didn't reply to say so!

Thanks,
    Paul

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Paul Burton]

Hi Christoph,

On Tue, Jul 10, 2018 at 02:35:18PM +0200, Christoph Hellwig wrote:
> On Wed, Jun 20, 2018 at 09:23:28AM +0200, Christoph Hellwig wrote:
> > No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
> > the other 0x7fffffff.
> > 
> > Below is the minimal fixup that keeps things as much as it was before.
> 
> IS the rest of the series now ok with you?  Anything else I should
> update?

The rest looked good - I applied the series to mips-next & it's been
sitting in linux-next for a couple of weeks now. Apologies it looks like
I didn't reply to say so!

Thanks,
    Paul

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

On Wed, Jun 20, 2018 at 09:23:28AM +0200, Christoph Hellwig wrote:
> No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
> the other 0x7fffffff.
> 
> Below is the minimal fixup that keeps things as much as it was before.

IS the rest of the series now ok with you?  Anything else I should
update?

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

On Wed, Jun 20, 2018 at 09:23:28AM +0200, Christoph Hellwig wrote:
> No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
> the other 0x7fffffff.
> 
> Below is the minimal fixup that keeps things as much as it was before.

IS the rest of the series now ok with you?  Anything else I should
update?

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

On Tue, Jun 19, 2018 at 04:19:25PM -0700, Paul Burton wrote:
> Hi Christoph,
> 
> On Fri, Jun 15, 2018 at 01:08:47PM +0200, Christoph Hellwig wrote:
> > -static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> > -	dma_addr_t dma_addr)
> > -{
> > -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> > -	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> > -#else
> > -	return dma_addr & 0x7fffffff;
> > -#endif
> > -}
> 
> ...
> 
> > +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
> > +{
> > +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> > +	if (dma_addr > 0x8fffffff)
> > +		return dma_addr;
> > +#endif
> > +	return dma_addr & 0x0fffffff;
> > +}
> 
> Thanks for putting in the work here - I've applied patches 1-17 to
> mips-next so far, but I'm struggling to convince myself that the above
> is correct.
> 
> In the original code we have 3 distinct cases:
> 
>   64b Loongson2F, dma_addr > 0x8fffffff  -> dma_addr
>   64b Loongson2F, dma_addr <= 0x8fffffff -> dma_addr & 0x0fffffff
>   Everything else                        -> dma_addr & 0x7fffffff
> 
> In the new __dma_to_phys() though only the first case remains the same.
> 
> Is this intentional or a mixup?

No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
the other 0x7fffffff.

Below is the minimal fixup that keeps things as much as it was before.

---
From 174213f535c07774cdbbccd42c76164893729cf5 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch@lst.de>
Date: Wed, 20 Jun 2018 09:11:15 +0200
Subject: MIPS: loongson64: use generic dma noncoherent ops
Content-Length: 4681
Lines: 159

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  1 +
 .../asm/mach-loongson64/dma-coherence.h       | 69 -------------------
 arch/mips/loongson64/Kconfig                  |  2 -
 arch/mips/loongson64/common/Makefile          |  1 +
 arch/mips/loongson64/common/dma.c             | 18 +++++
 5 files changed, 20 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-loongson64/dma-coherence.h
 create mode 100644 arch/mips/loongson64/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 326bd73bc5bf..e192e484b1b8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1827,6 +1827,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
deleted file mode 100644
index 651dd2eb3ee5..000000000000
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index a785bf8da3f3..c865b4b9b775 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,7 +13,6 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -45,7 +44,6 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..57ee03022941 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -6,6 +6,7 @@
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o serial.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_CPU_LOONGSON2) += dma.o
 
 #
 # Serial port support
diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c
new file mode 100644
index 000000000000..48f04126bde2
--- /dev/null
+++ b/arch/mips/loongson64/common/dma.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-direct.h>
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr | 0x80000000;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	if (dma_addr > 0x8fffffff)
+		return dma_addr;
+	return dma_addr & 0x0fffffff;
+#else
+	return dma_addr & 0x7fffffff;
+#endif
+}
-- 
2.17.1

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

On Tue, Jun 19, 2018 at 04:19:25PM -0700, Paul Burton wrote:
> Hi Christoph,
> 
> On Fri, Jun 15, 2018 at 01:08:47PM +0200, Christoph Hellwig wrote:
> > -static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> > -	dma_addr_t dma_addr)
> > -{
> > -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> > -	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> > -#else
> > -	return dma_addr & 0x7fffffff;
> > -#endif
> > -}
> 
> ...
> 
> > +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
> > +{
> > +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> > +	if (dma_addr > 0x8fffffff)
> > +		return dma_addr;
> > +#endif
> > +	return dma_addr & 0x0fffffff;
> > +}
> 
> Thanks for putting in the work here - I've applied patches 1-17 to
> mips-next so far, but I'm struggling to convince myself that the above
> is correct.
> 
> In the original code we have 3 distinct cases:
> 
>   64b Loongson2F, dma_addr > 0x8fffffff  -> dma_addr
>   64b Loongson2F, dma_addr <= 0x8fffffff -> dma_addr & 0x0fffffff
>   Everything else                        -> dma_addr & 0x7fffffff
> 
> In the new __dma_to_phys() though only the first case remains the same.
> 
> Is this intentional or a mixup?

No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
the other 0x7fffffff.

Below is the minimal fixup that keeps things as much as it was before.

---

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

On Tue, Jun 19, 2018 at 04:19:25PM -0700, Paul Burton wrote:
> Hi Christoph,
> 
> On Fri, Jun 15, 2018 at 01:08:47PM +0200, Christoph Hellwig wrote:
> > -static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> > -	dma_addr_t dma_addr)
> > -{
> > -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> > -	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> > -#else
> > -	return dma_addr & 0x7fffffff;
> > -#endif
> > -}
> 
> ...
> 
> > +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
> > +{
> > +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> > +	if (dma_addr > 0x8fffffff)
> > +		return dma_addr;
> > +#endif
> > +	return dma_addr & 0x0fffffff;
> > +}
> 
> Thanks for putting in the work here - I've applied patches 1-17 to
> mips-next so far, but I'm struggling to convince myself that the above
> is correct.
> 
> In the original code we have 3 distinct cases:
> 
>   64b Loongson2F, dma_addr > 0x8fffffff  -> dma_addr
>   64b Loongson2F, dma_addr <= 0x8fffffff -> dma_addr & 0x0fffffff
>   Everything else                        -> dma_addr & 0x7fffffff
> 
> In the new __dma_to_phys() though only the first case remains the same.
> 
> Is this intentional or a mixup?

No, this is a mixup.  I hadn't noticed one case was 0x0fffffff and
the other 0x7fffffff.

Below is the minimal fixup that keeps things as much as it was before.

---
>From 174213f535c07774cdbbccd42c76164893729cf5 Mon Sep 17 00:00:00 2001
From: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
Date: Wed, 20 Jun 2018 09:11:15 +0200
Subject: MIPS: loongson64: use generic dma noncoherent ops

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  1 +
 .../asm/mach-loongson64/dma-coherence.h       | 69 -------------------
 arch/mips/loongson64/Kconfig                  |  2 -
 arch/mips/loongson64/common/Makefile          |  1 +
 arch/mips/loongson64/common/dma.c             | 18 +++++
 5 files changed, 20 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-loongson64/dma-coherence.h
 create mode 100644 arch/mips/loongson64/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 326bd73bc5bf..e192e484b1b8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1827,6 +1827,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
deleted file mode 100644
index 651dd2eb3ee5..000000000000
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx-h23VmSynlr/QT0dZR+AlfA@public.gmane.org
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index a785bf8da3f3..c865b4b9b775 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,7 +13,6 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -45,7 +44,6 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..57ee03022941 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -6,6 +6,7 @@
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o serial.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_CPU_LOONGSON2) += dma.o
 
 #
 # Serial port support
diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c
new file mode 100644
index 000000000000..48f04126bde2
--- /dev/null
+++ b/arch/mips/loongson64/common/dma.c
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-direct.h>
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr | 0x80000000;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	if (dma_addr > 0x8fffffff)
+		return dma_addr;
+	return dma_addr & 0x0fffffff;
+#else
+	return dma_addr & 0x7fffffff;
+#endif
+}
-- 
2.17.1

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Paul Burton]

Hi Christoph,

On Fri, Jun 15, 2018 at 01:08:47PM +0200, Christoph Hellwig wrote:
> -static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> -	dma_addr_t dma_addr)
> -{
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> -	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> -#else
> -	return dma_addr & 0x7fffffff;
> -#endif
> -}

...

> +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
> +{
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +	if (dma_addr > 0x8fffffff)
> +		return dma_addr;
> +#endif
> +	return dma_addr & 0x0fffffff;
> +}

Thanks for putting in the work here - I've applied patches 1-17 to
mips-next so far, but I'm struggling to convince myself that the above
is correct.

In the original code we have 3 distinct cases:

  64b Loongson2F, dma_addr > 0x8fffffff  -> dma_addr
  64b Loongson2F, dma_addr <= 0x8fffffff -> dma_addr & 0x0fffffff
  Everything else                        -> dma_addr & 0x7fffffff

In the new __dma_to_phys() though only the first case remains the same.

Is this intentional or a mixup?

Thanks,
    Paul

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Paul Burton]

Hi Christoph,

On Fri, Jun 15, 2018 at 01:08:47PM +0200, Christoph Hellwig wrote:
> -static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> -	dma_addr_t dma_addr)
> -{
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> -	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> -#else
> -	return dma_addr & 0x7fffffff;
> -#endif
> -}

...

> +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
> +{
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +	if (dma_addr > 0x8fffffff)
> +		return dma_addr;
> +#endif
> +	return dma_addr & 0x0fffffff;
> +}

Thanks for putting in the work here - I've applied patches 1-17 to
mips-next so far, but I'm struggling to convince myself that the above
is correct.

In the original code we have 3 distinct cases:

  64b Loongson2F, dma_addr > 0x8fffffff  -> dma_addr
  64b Loongson2F, dma_addr <= 0x8fffffff -> dma_addr & 0x0fffffff
  Everything else                        -> dma_addr & 0x7fffffff

In the new __dma_to_phys() though only the first case remains the same.

Is this intentional or a mixup?

Thanks,
    Paul

Re: [PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Paul Burton]

Hi Christoph,

On Fri, Jun 15, 2018 at 01:08:47PM +0200, Christoph Hellwig wrote:
> -static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
> -	dma_addr_t dma_addr)
> -{
> -#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> -	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
> -#else
> -	return dma_addr & 0x7fffffff;
> -#endif
> -}

...

> +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
> +{
> +#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
> +	if (dma_addr > 0x8fffffff)
> +		return dma_addr;
> +#endif
> +	return dma_addr & 0x0fffffff;
> +}

Thanks for putting in the work here - I've applied patches 1-17 to
mips-next so far, but I'm struggling to convince myself that the above
is correct.

In the original code we have 3 distinct cases:

  64b Loongson2F, dma_addr > 0x8fffffff  -> dma_addr
  64b Loongson2F, dma_addr <= 0x8fffffff -> dma_addr & 0x0fffffff
  Everything else                        -> dma_addr & 0x7fffffff

In the new __dma_to_phys() though only the first case remains the same.

Is this intentional or a mixup?

Thanks,
    Paul

[PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/mips/Kconfig                             |  1 +
 .../asm/mach-loongson64/dma-coherence.h       | 69 -------------------
 arch/mips/loongson64/Kconfig                  |  2 -
 arch/mips/loongson64/common/Makefile          |  1 +
 arch/mips/loongson64/common/dma.c             | 16 +++++
 5 files changed, 18 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-loongson64/dma-coherence.h
 create mode 100644 arch/mips/loongson64/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 326bd73bc5bf..e192e484b1b8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1827,6 +1827,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
deleted file mode 100644
index 651dd2eb3ee5..000000000000
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf@linux-mips.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx@lemote.com
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index a785bf8da3f3..c865b4b9b775 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,7 +13,6 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -45,7 +44,6 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..57ee03022941 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -6,6 +6,7 @@
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o serial.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_CPU_LOONGSON2) += dma.o
 
 #
 # Serial port support
diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c
new file mode 100644
index 000000000000..95ede4b0fbbb
--- /dev/null
+++ b/arch/mips/loongson64/common/dma.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-direct.h>
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr | 0x80000000;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	if (dma_addr > 0x8fffffff)
+		return dma_addr;
+#endif
+	return dma_addr & 0x0fffffff;
+}
-- 
2.17.1

[PATCH 18/25] MIPS: loongson64: use generic dma noncoherent ops

[Christoph Hellwig]

Provide phys_to_dma/dma_to_phys helpers, everything else is generic.

Signed-off-by: Christoph Hellwig <hch-jcswGhMUV9g@public.gmane.org>
---
 arch/mips/Kconfig                             |  1 +
 .../asm/mach-loongson64/dma-coherence.h       | 69 -------------------
 arch/mips/loongson64/Kconfig                  |  2 -
 arch/mips/loongson64/common/Makefile          |  1 +
 arch/mips/loongson64/common/dma.c             | 16 +++++
 5 files changed, 18 insertions(+), 71 deletions(-)
 delete mode 100644 arch/mips/include/asm/mach-loongson64/dma-coherence.h
 create mode 100644 arch/mips/loongson64/common/dma.c

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 326bd73bc5bf..e192e484b1b8 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1827,6 +1827,7 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 	select CPU_SUPPORTS_HUGEPAGES
+	select ARCH_HAS_PHYS_TO_DMA
 
 config CPU_LOONGSON1
 	bool
diff --git a/arch/mips/include/asm/mach-loongson64/dma-coherence.h b/arch/mips/include/asm/mach-loongson64/dma-coherence.h
deleted file mode 100644
index 651dd2eb3ee5..000000000000
--- a/arch/mips/include/asm/mach-loongson64/dma-coherence.h
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006, 07  Ralf Baechle <ralf-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org>
- * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
- * Author: Fuxin Zhang, zhangfx-h23VmSynlr/QT0dZR+AlfA@public.gmane.org
- *
- */
-#ifndef __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-#define __ASM_MACH_LOONGSON64_DMA_COHERENCE_H
-
-#ifdef CONFIG_SWIOTLB
-#include <linux/swiotlb.h>
-#endif
-
-struct device;
-
-static inline dma_addr_t plat_map_dma_mem(struct device *dev, void *addr,
-					  size_t size)
-{
-	return virt_to_phys(addr) | 0x80000000;
-}
-
-static inline dma_addr_t plat_map_dma_mem_page(struct device *dev,
-					       struct page *page)
-{
-	return page_to_phys(page) | 0x80000000;
-}
-
-static inline unsigned long plat_dma_addr_to_phys(struct device *dev,
-	dma_addr_t dma_addr)
-{
-#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
-	return (dma_addr > 0x8fffffff) ? dma_addr : (dma_addr & 0x0fffffff);
-#else
-	return dma_addr & 0x7fffffff;
-#endif
-}
-
-static inline void plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr,
-	size_t size, enum dma_data_direction direction)
-{
-}
-
-static inline int plat_dma_supported(struct device *dev, u64 mask)
-{
-	/*
-	 * we fall back to GFP_DMA when the mask isn't all 1s,
-	 * so we can't guarantee allocations that must be
-	 * within a tighter range than GFP_DMA..
-	 */
-	if (mask < DMA_BIT_MASK(24))
-		return 0;
-
-	return 1;
-}
-
-static inline int plat_device_is_coherent(struct device *dev)
-{
-	return 0;
-}
-
-static inline void plat_post_dma_flush(struct device *dev)
-{
-}
-
-#endif /* __ASM_MACH_LOONGSON64_DMA_COHERENCE_H */
diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig
index a785bf8da3f3..c865b4b9b775 100644
--- a/arch/mips/loongson64/Kconfig
+++ b/arch/mips/loongson64/Kconfig
@@ -13,7 +13,6 @@ config LEMOTE_FULOONG2E
 	select CSRC_R4K
 	select SYS_HAS_CPU_LOONGSON2E
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select BOOT_ELF32
 	select BOARD_SCACHE
 	select HW_HAS_PCI
@@ -45,7 +44,6 @@ config LEMOTE_MACH2F
 	select CS5536
 	select CSRC_R4K if ! MIPS_EXTERNAL_TIMER
 	select DMA_NONCOHERENT
-	select MIPS_DMA_DEFAULT
 	select GENERIC_ISA_DMA_SUPPORT_BROKEN
 	select HAVE_CLK
 	select HW_HAS_PCI
diff --git a/arch/mips/loongson64/common/Makefile b/arch/mips/loongson64/common/Makefile
index 684624f61f5a..57ee03022941 100644
--- a/arch/mips/loongson64/common/Makefile
+++ b/arch/mips/loongson64/common/Makefile
@@ -6,6 +6,7 @@
 obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
     bonito-irq.o mem.o machtype.o platform.o serial.o
 obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_CPU_LOONGSON2) += dma.o
 
 #
 # Serial port support
diff --git a/arch/mips/loongson64/common/dma.c b/arch/mips/loongson64/common/dma.c
new file mode 100644
index 000000000000..95ede4b0fbbb
--- /dev/null
+++ b/arch/mips/loongson64/common/dma.c
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/dma-direct.h>
+
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+	return paddr | 0x80000000;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+#if defined(CONFIG_CPU_LOONGSON2F) && defined(CONFIG_64BIT)
+	if (dma_addr > 0x8fffffff)
+		return dma_addr;
+#endif
+	return dma_addr & 0x0fffffff;
+}
-- 
2.17.1