From: John Whitmore <johnfwhitmore@gmail.com>
To: gregkh@linuxfoundation.org
Cc: colin.king@canonical.com, kstewart@linuxfoundation.org,
tglx@linutronix.de, devel@driverdev.osuosl.org,
linux-kernel@vger.kernel.org,
John Whitmore <johnfwhitmore@gmail.com>
Subject: [PATCH v4 1/5] staging: rtl8192e: Add spaces where required by coding standard
Date: Sat, 26 May 2018 09:10:15 +0100 [thread overview]
Message-ID: <20180526081019.4738-2-johnfwhitmore@gmail.com> (raw)
In-Reply-To: <20180526081019.4738-1-johnfwhitmore@gmail.com>
There were numerous coding syle errors in this file where spaces were required
around operators.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
---
.../staging/rtl8192u/ieee80211/rtl819x_HTProc.c | 126 ++++++++++-----------
1 file changed, 63 insertions(+), 63 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
index 6952dab6ec80..0a8be54fea4a 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HTProc.c
@@ -60,8 +60,8 @@ void HTUpdateDefaultSetting(struct ieee80211_device *ieee)
//printk("pHTinfo:%p, &pHTinfo:%p, mptr:%p, offsetof:%x\n", pHTInfo, &pHTInfo, __mptr, offsetof(struct ieee80211_device, pHTInfo));
//printk("===>ieee:%p,\n", ieee);
// ShortGI support
- pHTInfo->bRegShortGI20MHz= 1;
- pHTInfo->bRegShortGI40MHz= 1;
+ pHTInfo->bRegShortGI20MHz = 1;
+ pHTInfo->bRegShortGI40MHz = 1;
// 40MHz channel support
pHTInfo->bRegBW40MHz = 1;
@@ -138,12 +138,12 @@ void HTDebugHTCapability(u8 *CapIE, u8 *TitleString )
IEEE80211_DEBUG(IEEE80211_DL_HT, "<Log HT Capability>. Called by %s\n", TitleString );
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth)?"20MHz": "20/40MHz");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz)?"YES": "NO");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz)?"YES": "NO");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC)?"YES": "NO");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize)?"3839": "7935");
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk)?"YES": "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupported Channel Width = %s\n", (pCapELE->ChlWidth) ? "20MHz" : "20/40MHz");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 20M = %s\n", (pCapELE->ShortGI20Mhz) ? "YES" : "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport Short GI for 40M = %s\n", (pCapELE->ShortGI40Mhz) ? "YES" : "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport TX STBC = %s\n", (pCapELE->TxSTBC) ? "YES" : "NO");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMSDU Size = %s\n", (pCapELE->MaxAMSDUSize) ? "3839" : "7935");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSupport CCK in 20/40 mode = %s\n", (pCapELE->DssCCk) ? "YES" : "NO");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMax AMPDU Factor = %d\n", pCapELE->MaxRxAMPDUFactor);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMPDU Density = %d\n", pCapELE->MPDUDensity);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tMCS Rate Set = [%x][%x][%x][%x][%x]\n", pCapELE->MCS[0],\
@@ -193,7 +193,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "Lower Channel\n");
break;
}
- IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
+ IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth) ? "20Mhz" : "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
switch (pHTInfoEle->OptMode)
@@ -272,8 +272,8 @@ u16 HTHalfMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
u8 is40MHz;
u8 isShortGI;
- is40MHz = (IsHTHalfNmode40Bandwidth(ieee))?1:0;
- isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz))? 1:0;
+ is40MHz = (IsHTHalfNmode40Bandwidth(ieee)) ? 1 : 0;
+ isShortGI = (IsHTHalfNmodeSGI(ieee, is40MHz)) ? 1 : 0;
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
@@ -283,10 +283,10 @@ u16 HTMcsToDataRate(struct ieee80211_device *ieee, u8 nMcsRate)
{
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- u8 is40MHz = (pHTInfo->bCurBW40MHz)?1:0;
- u8 isShortGI = (pHTInfo->bCurBW40MHz)?
- ((pHTInfo->bCurShortGI40MHz)?1:0):
- ((pHTInfo->bCurShortGI20MHz)?1:0);
+ u8 is40MHz = (pHTInfo->bCurBW40MHz) ? 1 : 0;
+ u8 isShortGI = (pHTInfo->bCurBW40MHz) ?
+ ((pHTInfo->bCurShortGI40MHz) ? 1 : 0) :
+ ((pHTInfo->bCurShortGI20MHz) ? 1 : 0);
return MCS_DATA_RATE[is40MHz][isShortGI][(nMcsRate&0x7f)];
}
@@ -318,7 +318,7 @@ u16 TxCountToDataRate(struct ieee80211_device *ieee, u8 nDataRate)
// nDataRate = nDataRate - 12;
}
- else if (nDataRate >=0x20 && nDataRate <= 0x2f ) //(27, 44)
+ else if (nDataRate >= 0x20 && nDataRate <= 0x2f ) //(27, 44)
{
is40MHz = 1;
isShortGI = 0;
@@ -349,17 +349,17 @@ bool IsHTHalfNmodeAPs(struct ieee80211_device *ieee)
{
bool retValue = false;
struct ieee80211_network *net = &ieee->current_network;
- if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
- (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
- (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
- (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
- (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+ if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
(net->ralink_cap_exist))
retValue = true;
- else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) ||
+ else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) ||
(net->broadcom_cap_exist))
retValue = true;
else if (net->bssht.bdRT2RTAggregation)
@@ -385,21 +385,21 @@ static void HTIOTPeerDetermine(struct ieee80211_device *ieee)
pHTInfo->IOTPeer = HT_IOT_PEER_REALTEK;
else if (net->broadcom_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
- else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0)||
- (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3)==0)||
- (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3)==0) )
+ else if ((memcmp(net->bssid, UNKNOWN_BORADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0) ||
+ (memcmp(net->bssid, NETGEAR834Bv2_BROADCOM, 3) == 0) )
pHTInfo->IOTPeer = HT_IOT_PEER_BROADCOM;
- else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3)==0) ||
- (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3)==0) ||
- (memcmp(net->bssid, PCI_RALINK, 3)==0) ||
- (memcmp(net->bssid, EDIMAX_RALINK, 3)==0) ||
- (memcmp(net->bssid, AIRLINK_RALINK, 3)==0) ||
+ else if ((memcmp(net->bssid, BELKINF5D8233V1_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, BELKINF5D82334V3_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, PCI_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, EDIMAX_RALINK, 3) == 0) ||
+ (memcmp(net->bssid, AIRLINK_RALINK, 3) == 0) ||
net->ralink_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_RALINK;
else if (net->atheros_cap_exist)
pHTInfo->IOTPeer = HT_IOT_PEER_ATHEROS;
- else if (memcmp(net->bssid, CISCO_BROADCOM, 3)==0)
+ else if (memcmp(net->bssid, CISCO_BROADCOM, 3) == 0)
pHTInfo->IOTPeer = HT_IOT_PEER_CISCO;
else
pHTInfo->IOTPeer = HT_IOT_PEER_UNKNOWN;
@@ -438,7 +438,7 @@ static bool HTIOTActIsDisableMCS15(struct ieee80211_device *ieee)
#ifdef TODO
// Apply for 819u only
-#if (HAL_CODE_BASE==RTL8192)
+#if (HAL_CODE_BASE == RTL8192)
#if (DEV_BUS_TYPE == USB_INTERFACE)
// Alway disable MCS15 by Jerry Chang's request.by Emily, 2008.04.15
@@ -515,9 +515,9 @@ static u8 HTIOTActIsMgntUseCCK6M(struct ieee80211_network *network)
static u8 HTIOTActIsCCDFsync(u8 *PeerMacAddr)
{
u8 retValue = 0;
- if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3)==0) ||
- (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) ==0))
+ if ((memcmp(PeerMacAddr, UNKNOWN_BORADCOM, 3) == 0) ||
+ (memcmp(PeerMacAddr, LINKSYSWRT330_LINKSYSWRT300_BROADCOM, 3) == 0) ||
+ (memcmp(PeerMacAddr, LINKSYSWRT350_LINKSYSWRT150_BROADCOM, 3) == 0))
{
retValue = 1;
}
@@ -575,7 +575,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
}
else
{
- pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
+ pCapELE->ChlWidth = (pHT->bRegBW40MHz ? 1 : 0);
}
// pCapELE->ChlWidth = (pHT->bRegBW40MHz?1:0);
@@ -588,8 +588,8 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
pCapELE->TxSTBC = 1;
pCapELE->RxSTBC = 0;
pCapELE->DelayBA = 0; // Do not support now!!
- pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE>=7935)?1:0;
- pCapELE->DssCCk = ((pHT->bRegBW40MHz)?(pHT->bRegSuppCCK?1:0):0);
+ pCapELE->MaxAMSDUSize = (MAX_RECEIVE_BUFFER_SIZE >= 7935) ? 1 : 0;
+ pCapELE->DssCCk = ((pHT->bRegBW40MHz) ? (pHT->bRegSuppCCK ? 1 : 0) : 0);
pCapELE->PSMP = 0; // Do not support now!!
pCapELE->LSigTxopProtect = 0; // Do not support now!!
@@ -600,11 +600,11 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (IsEncrypt) {
pCapELE->MPDUDensity = 7; // 8us
- pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
+ pCapELE->MaxRxAMPDUFactor = 2; // 2 is for 32 K and 3 is 64K
}
else
{
- pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
+ pCapELE->MaxRxAMPDUFactor = 3; // 2 is for 32 K and 3 is 64K
pCapELE->MPDUDensity = 0; // no density
}
@@ -624,7 +624,7 @@ void HTConstructCapabilityElement(struct ieee80211_device *ieee, u8 *posHTCap, u
if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
{
int i;
- for (i = 1; i< 16; i++)
+ for (i = 1; i < 16; i++)
pCapELE->MCS[i] = 0;
}
@@ -676,9 +676,9 @@ void HTConstructInfoElement(struct ieee80211_device *ieee, u8 *posHTInfo, u8 *le
if ( (ieee->iw_mode == IW_MODE_ADHOC) || (ieee->iw_mode == IW_MODE_MASTER)) //ap mode is not currently supported
{
pHTInfoEle->ControlChl = ieee->current_network.channel;
- pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz)?HT_EXTCHNL_OFFSET_NO_EXT:
- (ieee->current_network.channel<=6)?
- HT_EXTCHNL_OFFSET_UPPER:HT_EXTCHNL_OFFSET_LOWER);
+ pHTInfoEle->ExtChlOffset = ((!pHT->bRegBW40MHz) ? HT_EXTCHNL_OFFSET_NO_EXT :
+ (ieee->current_network.channel <= 6) ?
+ HT_EXTCHNL_OFFSET_UPPER : HT_EXTCHNL_OFFSET_LOWER);
pHTInfoEle->RecommemdedTxWidth = pHT->bRegBW40MHz;
pHTInfoEle->RIFS = 0;
pHTInfoEle->PSMPAccessOnly = 0;
@@ -805,7 +805,7 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//legacy rate routine handled at selectedrate
//no MCS rate
- for (i=0;i<=15;i++){
+ for (i = 0; i <= 15; i++){
pOperateMCS[i] = 0;
}
break;
@@ -817,9 +817,9 @@ static u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
//HT part
// TODO: may be different if we have different number of antenna
- pOperateMCS[0] &=RATE_ADPT_1SS_MASK; //support MCS 0~7
- pOperateMCS[1] &=RATE_ADPT_2SS_MASK;
- pOperateMCS[3] &=RATE_ADPT_MCS32_MASK;
+ pOperateMCS[0] &= RATE_ADPT_1SS_MASK; //support MCS 0~7
+ pOperateMCS[1] &= RATE_ADPT_2SS_MASK;
+ pOperateMCS[3] &= RATE_ADPT_MCS32_MASK;
break;
//should never reach here
@@ -862,7 +862,7 @@ u8 HTGetHighestMCSRate(struct ieee80211_device *ieee, u8 *pMCSRateSet, u8 *pMCSF
IEEE80211_DEBUG(IEEE80211_DL_ERR, "pMCSRateSet or pMCSFilter can't be null in HTGetHighestMCSRate()\n");
return false;
}
- for (i=0; i<16; i++)
+ for (i = 0; i < 16; i++)
availableMcsRate[i] = pMCSRateSet[i] & pMCSFilter[i];
for (i = 0; i < 16; i++)
@@ -907,10 +907,10 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
u8 *pOperateMCS)
{
- u8 i=0;
+ u8 i = 0;
// filter out operational rate set not supported by AP, the length of it is 16
- for (i=0;i<=15;i++){
+ for (i = 0; i <= 15; i++){
pOperateMCS[i] = ieee->Regdot11HTOperationalRateSet[i]&pSupportMCS[i];
}
@@ -929,7 +929,7 @@ static u8 HTFilterMCSRate(struct ieee80211_device *ieee, u8 *pSupportMCS,
// For RTL819X, we support only MCS0~15.
// And also, we do not know how to use MCS32 now.
//
- for (i=2; i<=15; i++)
+ for (i = 2; i <= 15; i++)
pOperateMCS[i] = 0;
return true;
@@ -1006,7 +1006,7 @@ void HTOnAssocRsp(struct ieee80211_device *ieee)
//
pHTInfo->bCurrent_AMSDU_Support = pHTInfo->bAMSDU_Support;
- nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize==0)?3839:7935;
+ nMaxAMSDUSize = (pPeerHTCap->MaxAMSDUSize == 0) ? 3839 : 7935;
if (pHTInfo->nAMSDU_MaxSize > nMaxAMSDUSize )
pHTInfo->nCurrent_AMSDU_MaxSize = nMaxAMSDUSize;
@@ -1196,7 +1196,7 @@ void HTInitializeBssDesc(PBSS_HT pBssHT)
memset(pBssHT->bdHTInfoBuf, 0, sizeof(pBssHT->bdHTInfoBuf));
pBssHT->bdHTInfoLen = 0;
- pBssHT->bdHTSpecVer= HT_SPEC_VER_IEEE;
+ pBssHT->bdHTSpecVer = HT_SPEC_VER_IEEE;
pBssHT->bdRT2RTAggregation = false;
pBssHT->bdRT2RTLongSlotTime = false;
@@ -1357,12 +1357,12 @@ void HTSetConnectBwMode(struct ieee80211_device *ieee, HT_CHANNEL_WIDTH Bandwidt
return;
}
//if in half N mode, set to 20M bandwidth please 09.08.2008 WB.
- if (Bandwidth==HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
+ if (Bandwidth == HT_CHANNEL_WIDTH_20_40 && (!ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev)))
{
// Handle Illegal extension channel offset!!
- if (ieee->current_network.channel<2 && Offset==HT_EXTCHNL_OFFSET_LOWER)
+ if (ieee->current_network.channel < 2 && Offset == HT_EXTCHNL_OFFSET_LOWER)
Offset = HT_EXTCHNL_OFFSET_NO_EXT;
- if (Offset==HT_EXTCHNL_OFFSET_UPPER || Offset==HT_EXTCHNL_OFFSET_LOWER) {
+ if (Offset == HT_EXTCHNL_OFFSET_UPPER || Offset == HT_EXTCHNL_OFFSET_LOWER) {
pHTInfo->bCurBW40MHz = true;
pHTInfo->CurSTAExtChnlOffset = Offset;
} else {
@@ -1393,9 +1393,9 @@ void HTSetConnectBwModeCallback(struct ieee80211_device *ieee)
if (pHTInfo->bCurBW40MHz)
{
- if (pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_UPPER)
+ if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_UPPER)
ieee->set_chan(ieee->dev, ieee->current_network.channel+2);
- else if (pHTInfo->CurSTAExtChnlOffset==HT_EXTCHNL_OFFSET_LOWER)
+ else if (pHTInfo->CurSTAExtChnlOffset == HT_EXTCHNL_OFFSET_LOWER)
ieee->set_chan(ieee->dev, ieee->current_network.channel-2);
else
ieee->set_chan(ieee->dev, ieee->current_network.channel);
--
2.16.3
next prev parent reply other threads:[~2018-05-26 8:12 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-26 8:10 [PATCH v4] staging: rtl8192e: Coding style changes John Whitmore
2018-05-26 8:10 ` John Whitmore [this message]
2018-05-26 8:10 ` [PATCH v4 2/5] staging: rtl8192e: correct position of '{', '}', '(' and ')' - coding style John Whitmore
2018-05-26 8:10 ` [PATCH v4 3/5] staging: rtl8192e: Correct indentation of switch statements " John Whitmore
2018-05-26 8:10 ` [PATCH v4 4/5] staging: rtl8192e: Add and remove blank lines - Coding style John Whitmore
2018-06-01 8:50 ` Greg KH
2018-05-26 8:10 ` [PATCH v4 5/5] staging: rtl8192e: Remove unrequired blank lines - Coding Style John Whitmore
2018-06-01 8:51 ` Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180526081019.4738-2-johnfwhitmore@gmail.com \
--to=johnfwhitmore@gmail.com \
--cc=colin.king@canonical.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@linuxfoundation.org \
--cc=kstewart@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.