All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v10 28/35] arm64: allwinner: a64: bananapi-m64: Sync usb host nodes from Linux
Date: Mon, 28 May 2018 16:48:39 +0530	[thread overview]
Message-ID: <20180528111846.14316-29-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20180528111846.14316-1-jagan@amarulasolutions.com>

Sync bananapi-m64 usb host nodes from Linux.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Jun Nie <jun.nie@linaro.org>
---
 arch/arm/dts/sun50i-a64-bananapi-m64.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/dts/sun50i-a64-bananapi-m64.dts b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
index 80405e5b26..dcde4a4881 100644
--- a/arch/arm/dts/sun50i-a64-bananapi-m64.dts
+++ b/arch/arm/dts/sun50i-a64-bananapi-m64.dts
@@ -68,6 +68,14 @@
 	};
 };
 
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
@@ -108,6 +116,14 @@
 	status = "okay";
 };
 
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
-- 
2.14.3

  parent reply	other threads:[~2018-05-28 11:18 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-28 11:18 [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 01/35] usb: sunxi: Simplify ccm reg base code Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 02/35] musb: sunxi: Add proper macros instead of numericals Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 03/35] musb: sunxi: Use simple way to fill musb_hdrc pdata Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 04/35] musb: sunxi: Add fifo config Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 05/35] sunxi: clock: Fix clock gating for H3/H5/A64 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 06/35] musb: sunxi: Add OTG device clkgate and reset for H3/H5 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 07/35] musb: sunxi: Use BIT instead of numerical shift Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 08/35] sunxi: clock: Fix OHCI clock gating for H3/H5 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 09/35] musb: sunxi: Add support for H3/H5/A64 Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 10/35] phy: Add Allwinner A64 USB PHY driver Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 11/35] phy: sun4i-usb: Add id_detect and vbus_detect ops Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 12/35] phy: sun4i-usb: Add H3/H5 PHY config Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 13/35] phy: sun4i-usb: Add V3S " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 14/35] phy: sun4i-usb: Add A83T USB " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 15/35] phy: sun4i-usb: Add A10/A13/A20 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 16/35] phy: sun4i-usb: Add A31 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 17/35] phy: sun4i-usb: Add A33 USB " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 18/35] phy: sun4i-usb: Add A23 " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 19/35] device-tree-bindings: phy: Sync sun4i-usb-phy bindings Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 20/35] board: sunxi: Use generic-phy for board_usb_cable_connected Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 21/35] phy: sun4i-usb: Add a sunxi specific function for setting squelch-detect Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 22/35] usb: sunxi: Switch to use generic-phy Jagan Teki
2018-06-27 23:09   ` [U-Boot] [linux-sunxi] " Adam Sampson
2018-06-28  0:54     ` Vasily Khoruzhick
2018-06-28  2:08     ` Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 23/35] sunxi: Drop legacy usb_phy.c Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 24/35] sunxi: h3: Sync OTG and HCI nodes from Linux DT Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 25/35] arm64: allwinner: a64: bananapi-m64: Sync usb_otg node from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 26/35] configs: bananapi-m64: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 27/35] ARM: dts: sun8i: a83t: Sync usbphy node from Linux Jagan Teki
2018-05-28 11:18 ` Jagan Teki [this message]
2018-05-28 11:18 ` [U-Boot] [PATCH v10 29/35] ARM: dts: sun8i-h3: bananapi-m2-plus: Sync usb otg nodes " Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 30/35] configs: bananapi-m2-plus: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 31/35] arm64: allwinner: h5: orangepi-pc2: Order nodes in alphabetic Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 32/35] arm64: allwinner: h5: orangepi-pc2: Sync usb otg nodes from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 33/35] configs: orangepi-pc2: Enable USB OTG peripheral mode Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 34/35] arm64: allwinner: h5: orangepi-prime: Sync usb otg nodes from Linux Jagan Teki
2018-05-28 11:18 ` [U-Boot] [PATCH v10 35/35] configs: orangepi-prime: Enable USB OTG peripheral mode Jagan Teki
2018-06-01 16:52 ` [U-Boot] [PATCH v10 00/35] phy: sunxi: Add Allwinner sun4i USB PHY Jagan Teki
2018-06-05  4:54   ` Vasily Khoruzhick
2018-06-05  5:11     ` Vasily Khoruzhick
2018-06-05  5:34       ` Jagan Teki
2018-06-05  5:38         ` Vasily Khoruzhick
2018-06-05  5:47           ` Vasily Khoruzhick
2018-06-05  5:51             ` Jagan Teki
2018-06-05  5:58               ` Vasily Khoruzhick
2018-06-05  6:31                 ` Vasily Khoruzhick
2018-06-05  7:02                   ` Vasily Khoruzhick
2018-06-05  7:04                     ` Jagan Teki
2018-06-06  3:39                       ` Vasily Khoruzhick
2018-06-16 18:04                         ` Vasily Khoruzhick
2018-06-18  5:19                           ` Jagan Teki
2018-06-18  5:48                             ` Vasily Khoruzhick
2018-06-18  6:04                               ` Jagan Teki
2018-06-18  6:13                                 ` Vasily Khoruzhick
2018-06-18 16:59                                   ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180528111846.14316-29-jagan@amarulasolutions.com \
    --to=jagan@amarulasolutions.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.