* [PATCH 00/15] arm: dts: Fix OPP and cooling device properties
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Andrew Lunn, Andy Gross, Benoît Cousson, Chen-Yu Tsai,
David Brown, Fabio Estevam, Gregory Clement, Heiko Stuebner,
Jason Cooper, Jisheng Zhang, Krzysztof Kozlowski, Kukjin Kim,
Magnus Damm, Mark Rutland, Masahiro Yamada, Matthias Brugger,
Maxime Ripard, Pengutronix Kernel Team
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-arm-msm,
linux-kernel, linux-mediatek, linux-omap, linux-renesas-soc,
linux-rockchip, linux-samsung-soc, linux-soc
This fixes missing OPP and cooling device properties for CPUs for the
ARM 32 bit platforms. This is build tested by the zero day testing
infrastructure as well.
Individual maintainers can pick the patches to their SoC trees or I will
ask ARM SoC maintainers to pick them up later.
--
viresh
Viresh Kumar (15):
arm: dts: armada: Fix "#cooling-cells" property's name
arm: dts: ls1021a: Add missing cooling device properties for CPUs
arm: dts: mediatek: Add missing cooling device properties for CPUs
arm: dts: rk322x: Add missing cooling device properties for CPUs
arm: dts: uniphier: Add missing cooling device properties for CPUs
arm: dts: sun: Add missing cooling device properties for CPUs
arm: dts: exynos: Add missing cooling device properties for CPUs
arm: dts: dra74x: Add missing cooling device properties for CPUs
arm: dts: omap: Add missing cooling device properties for CPUs
arm: dts: rk3288: Add missing cooling device properties for CPUs
arm: dts: berlin: Add missing OPP properties for CPUs
arm: dts: highbank: Add missing OPP properties for CPUs
arm: dts: r8a7743: Add missing OPP properties for CPUs
arm: dts: qcom: Add missing OPP properties for CPUs
arm: dts: imx: Add missing OPP properties for CPUs
arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
arch/arm/boot/dts/berlin2.dtsi | 10 +++
arch/arm/boot/dts/berlin2q.dtsi | 33 ++++++++++
arch/arm/boot/dts/dra74x.dtsi | 10 +++
arch/arm/boot/dts/exynos3250.dtsi | 16 +++++
arch/arm/boot/dts/exynos4210.dtsi | 13 ++++
arch/arm/boot/dts/exynos4412.dtsi | 9 +++
arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++
arch/arm/boot/dts/highbank.dts | 30 +++++++++
arch/arm/boot/dts/imx6dl.dtsi | 23 +++++++
arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 87 ++++++++++++++++++++++++-
arch/arm/boot/dts/imx7d.dtsi | 5 ++
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm/boot/dts/mt7623.dtsi | 3 +
arch/arm/boot/dts/omap5.dtsi | 14 ++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 +++++++
arch/arm/boot/dts/r8a7743.dtsi | 9 +++
arch/arm/boot/dts/rk322x.dtsi | 3 +
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 30 +++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 ++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++
arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +
25 files changed, 495 insertions(+), 4 deletions(-)
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 00/15] arm: dts: Fix OPP and cooling device properties
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Andrew Lunn, Andy Gross, Benoît Cousson, Chen-Yu Tsai,
David Brown, Fabio Estevam, Gregory Clement, Heiko Stuebner,
Jason Cooper, Jisheng Zhang, Krzysztof Kozlowski, Kukjin Kim,
Magnus Damm, Mark Rutland, Masahiro Yamada, Matthias Brugger,
Maxime Ripard, Pengutronix Kernel Team, Rob Herring, Rob Herring,
Sascha Hauer, Sebastian Hesselbarth, Shawn Guo, Simon Horman,
Tony Lindgren
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-arm-msm,
linux-kernel, linux-mediatek, linux-omap, linux-renesas-soc,
linux-rockchip, linux-samsung-soc, linux-soc
This fixes missing OPP and cooling device properties for CPUs for the
ARM 32 bit platforms. This is build tested by the zero day testing
infrastructure as well.
Individual maintainers can pick the patches to their SoC trees or I will
ask ARM SoC maintainers to pick them up later.
--
viresh
Viresh Kumar (15):
arm: dts: armada: Fix "#cooling-cells" property's name
arm: dts: ls1021a: Add missing cooling device properties for CPUs
arm: dts: mediatek: Add missing cooling device properties for CPUs
arm: dts: rk322x: Add missing cooling device properties for CPUs
arm: dts: uniphier: Add missing cooling device properties for CPUs
arm: dts: sun: Add missing cooling device properties for CPUs
arm: dts: exynos: Add missing cooling device properties for CPUs
arm: dts: dra74x: Add missing cooling device properties for CPUs
arm: dts: omap: Add missing cooling device properties for CPUs
arm: dts: rk3288: Add missing cooling device properties for CPUs
arm: dts: berlin: Add missing OPP properties for CPUs
arm: dts: highbank: Add missing OPP properties for CPUs
arm: dts: r8a7743: Add missing OPP properties for CPUs
arm: dts: qcom: Add missing OPP properties for CPUs
arm: dts: imx: Add missing OPP properties for CPUs
arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
arch/arm/boot/dts/berlin2.dtsi | 10 +++
arch/arm/boot/dts/berlin2q.dtsi | 33 ++++++++++
arch/arm/boot/dts/dra74x.dtsi | 10 +++
arch/arm/boot/dts/exynos3250.dtsi | 16 +++++
arch/arm/boot/dts/exynos4210.dtsi | 13 ++++
arch/arm/boot/dts/exynos4412.dtsi | 9 +++
arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++
arch/arm/boot/dts/highbank.dts | 30 +++++++++
arch/arm/boot/dts/imx6dl.dtsi | 23 +++++++
arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 87 ++++++++++++++++++++++++-
arch/arm/boot/dts/imx7d.dtsi | 5 ++
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm/boot/dts/mt7623.dtsi | 3 +
arch/arm/boot/dts/omap5.dtsi | 14 ++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 +++++++
arch/arm/boot/dts/r8a7743.dtsi | 9 +++
arch/arm/boot/dts/rk322x.dtsi | 3 +
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 30 +++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 ++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++
arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +
25 files changed, 495 insertions(+), 4 deletions(-)
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 00/15] arm: dts: Fix OPP and cooling device properties
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
This fixes missing OPP and cooling device properties for CPUs for the
ARM 32 bit platforms. This is build tested by the zero day testing
infrastructure as well.
Individual maintainers can pick the patches to their SoC trees or I will
ask ARM SoC maintainers to pick them up later.
--
viresh
Viresh Kumar (15):
arm: dts: armada: Fix "#cooling-cells" property's name
arm: dts: ls1021a: Add missing cooling device properties for CPUs
arm: dts: mediatek: Add missing cooling device properties for CPUs
arm: dts: rk322x: Add missing cooling device properties for CPUs
arm: dts: uniphier: Add missing cooling device properties for CPUs
arm: dts: sun: Add missing cooling device properties for CPUs
arm: dts: exynos: Add missing cooling device properties for CPUs
arm: dts: dra74x: Add missing cooling device properties for CPUs
arm: dts: omap: Add missing cooling device properties for CPUs
arm: dts: rk3288: Add missing cooling device properties for CPUs
arm: dts: berlin: Add missing OPP properties for CPUs
arm: dts: highbank: Add missing OPP properties for CPUs
arm: dts: r8a7743: Add missing OPP properties for CPUs
arm: dts: qcom: Add missing OPP properties for CPUs
arm: dts: imx: Add missing OPP properties for CPUs
arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
arch/arm/boot/dts/berlin2.dtsi | 10 +++
arch/arm/boot/dts/berlin2q.dtsi | 33 ++++++++++
arch/arm/boot/dts/dra74x.dtsi | 10 +++
arch/arm/boot/dts/exynos3250.dtsi | 16 +++++
arch/arm/boot/dts/exynos4210.dtsi | 13 ++++
arch/arm/boot/dts/exynos4412.dtsi | 9 +++
arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++
arch/arm/boot/dts/highbank.dts | 30 +++++++++
arch/arm/boot/dts/imx6dl.dtsi | 23 +++++++
arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 87 ++++++++++++++++++++++++-
arch/arm/boot/dts/imx7d.dtsi | 5 ++
arch/arm/boot/dts/ls1021a.dtsi | 1 +
arch/arm/boot/dts/mt7623.dtsi | 3 +
arch/arm/boot/dts/omap5.dtsi | 14 ++++
arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 +++++++
arch/arm/boot/dts/r8a7743.dtsi | 9 +++
arch/arm/boot/dts/rk322x.dtsi | 3 +
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++
arch/arm/boot/dts/sun6i-a31.dtsi | 30 +++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 ++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++
arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +
25 files changed, 495 insertions(+), 4 deletions(-)
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name
2018-05-25 10:31 ` Viresh Kumar
(?)
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Jason Cooper, Andrew Lunn, Gregory Clement,
Sebastian Hesselbarth, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, devicetree, linux-kernel
It should be "#cooling-cells" instead of "cooling-cells". Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index 6782ce481ac9..d8769956cbfc 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -139,7 +139,7 @@
3700 5
3900 6
4000 7>;
- cooling-cells = <2>;
+ #cooling-cells = <2>;
};
gpio-leds {
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Jason Cooper, Andrew Lunn, Gregory Clement,
Sebastian Hesselbarth, Rob Herring, Mark Rutland
Cc: devicetree, Vincent Guittot, Viresh Kumar, Daniel Lezcano,
linux-kernel, chris.redpath, ionela.voinescu, linux-arm-kernel
It should be "#cooling-cells" instead of "cooling-cells". Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index 6782ce481ac9..d8769956cbfc 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -139,7 +139,7 @@
3700 5
3900 6
4000 7>;
- cooling-cells = <2>;
+ #cooling-cells = <2>;
};
gpio-leds {
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
It should be "#cooling-cells" instead of "cooling-cells". Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
index 6782ce481ac9..d8769956cbfc 100644
--- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
+++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
@@ -139,7 +139,7 @@
3700 5
3900 6
4000 7>;
- cooling-cells = <2>;
+ #cooling-cells = <2>;
};
gpio-leds {
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 02/15] arm: dts: ls1021a: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
` (2 preceding siblings ...)
(?)
@ 2018-05-25 10:31 ` Viresh Kumar
2018-07-03 1:35 ` Shawn Guo
-1 siblings, 1 reply; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/ls1021a.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index c55d479971cc..f18490548c78 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -84,6 +84,7 @@
device_type = "cpu";
reg = <0xf01>;
clocks = <&clockgen 1 0>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 03/15] arm: dts: mediatek: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Matthias Brugger, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, linux-mediatek, devicetree,
linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/mt7623.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d1eb123bc73b..1cdc346a05e8 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -92,6 +92,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
@@ -103,6 +104,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
@@ -114,6 +116,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 03/15] arm: dts: mediatek: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm-DgEjT+Ai2ygdnm+yROfE0A, Matthias Brugger, Rob Herring, Mark Rutland
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA, Vincent Guittot, Viresh Kumar,
Daniel Lezcano, linux-kernel-u79uwXL29TY76Z2rM5mHXA,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r,
chris.redpath-5wv7dgnIgG8, ionela.voinescu-5wv7dgnIgG8,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/mt7623.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d1eb123bc73b..1cdc346a05e8 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -92,6 +92,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
@@ -103,6 +104,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
@@ -114,6 +116,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 03/15] arm: dts: mediatek: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/mt7623.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index d1eb123bc73b..1cdc346a05e8 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -92,6 +92,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
@@ -103,6 +104,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
@@ -114,6 +116,7 @@
<&apmixedsys CLK_APMIXED_MAINPLL>;
clock-names = "cpu", "intermediate";
operating-points-v2 = <&cpu_opp_table>;
+ #cooling-cells = <2>;
clock-frequency = <1300000000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 04/15] arm: dts: rk322x: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Heiko Stuebner, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, linux-rockchip, devicetree,
linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/rk322x.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index be80e9a2c9af..ef414e39bf3a 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -80,6 +80,7 @@
reg = <0xf01>;
resets = <&cru SRST_CORE1>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
enable-method = "psci";
};
@@ -89,6 +90,7 @@
reg = <0xf02>;
resets = <&cru SRST_CORE2>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
enable-method = "psci";
};
@@ -98,6 +100,7 @@
reg = <0xf03>;
resets = <&cru SRST_CORE3>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
enable-method = "psci";
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 04/15] arm: dts: rk322x: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/rk322x.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index be80e9a2c9af..ef414e39bf3a 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -80,6 +80,7 @@
reg = <0xf01>;
resets = <&cru SRST_CORE1>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
enable-method = "psci";
};
@@ -89,6 +90,7 @@
reg = <0xf02>;
resets = <&cru SRST_CORE2>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
enable-method = "psci";
};
@@ -98,6 +100,7 @@
reg = <0xf03>;
resets = <&cru SRST_CORE3>;
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
enable-method = "psci";
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 05/15] arm: dts: uniphier: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland, Masahiro Yamada
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index debcbd15c24b..40ed15465095 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -36,6 +36,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
cpu2: cpu@2 {
@@ -46,6 +47,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
cpu3: cpu@3 {
@@ -56,6 +58,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 05/15] arm: dts: uniphier: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index debcbd15c24b..40ed15465095 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -36,6 +36,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
cpu2: cpu at 2 {
@@ -46,6 +47,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
cpu3: cpu at 3 {
@@ -56,6 +58,7 @@
enable-method = "psci";
next-level-cache = <&l2>;
operating-points-v2 = <&cpu_opp>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland, Maxime Ripard, Chen-Yu Tsai
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
4 files changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c72992556a86..debc0bf22ea3 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -119,18 +119,48 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..35372a0cfc8d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -122,6 +122,19 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 8d278ee001e9..4e92741b24a7 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -132,21 +132,30 @@
};
cpu@1 {
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 41d57c76f290..9dff6887923c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -84,21 +84,30 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/sun6i-a31.dtsi | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++++++++
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
4 files changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c72992556a86..debc0bf22ea3 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -119,18 +119,48 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..35372a0cfc8d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -122,6 +122,19 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 8d278ee001e9..4e92741b24a7 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -132,21 +132,30 @@
};
cpu at 1 {
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 41d57c76f290..9dff6887923c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -84,21 +84,30 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland, Kukjin Kim, Krzysztof Kozlowski
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-samsung-soc,
linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 13 +++++++++++++
arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++++++++++++++++++
4 files changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 962af97c1883..aff5d66ae058 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -78,6 +78,22 @@
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
+ clocks = <&cmu CLK_ARM_CLK>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
+
+ operating-points = <
+ 1000000 1150000
+ 900000 1112500
+ 800000 1075000
+ 700000 1037500
+ 600000 1000000
+ 500000 962500
+ 400000 925000
+ 300000 887500
+ 200000 850000
+ 100000 850000
+ >;
};
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 88fb47cef9a8..b6091c27f155 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -55,6 +55,19 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x901>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <160000>;
+
+ operating-points = <
+ 1200000 1250000
+ 1000000 1150000
+ 800000 1075000
+ 500000 975000
+ 400000 975000
+ 200000 950000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 7b43c10c510b..51f72f0327e5 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -49,21 +49,30 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu@a02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu@a03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2daf505b3d08..69648f83b8b4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -84,6 +84,29 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1700000000>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <140000>;
+
+ operating-points = <
+ 1700000 1300000
+ 1600000 1250000
+ 1500000 1225000
+ 1400000 1200000
+ 1300000 1150000
+ 1200000 1125000
+ 1100000 1100000
+ 1000000 1075000
+ 900000 1050000
+ 800000 1025000
+ 700000 1012500
+ 600000 1000000
+ 500000 975000
+ 400000 950000
+ 300000 937500
+ 200000 925000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 13 +++++++++++++
arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++++++++++++++++++
4 files changed, 61 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index 962af97c1883..aff5d66ae058 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -78,6 +78,22 @@
compatible = "arm,cortex-a7";
reg = <1>;
clock-frequency = <1000000000>;
+ clocks = <&cmu CLK_ARM_CLK>;
+ clock-names = "cpu";
+ #cooling-cells = <2>;
+
+ operating-points = <
+ 1000000 1150000
+ 900000 1112500
+ 800000 1075000
+ 700000 1037500
+ 600000 1000000
+ 500000 962500
+ 400000 925000
+ 300000 887500
+ 200000 850000
+ 100000 850000
+ >;
};
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 88fb47cef9a8..b6091c27f155 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -55,6 +55,19 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0x901>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <160000>;
+
+ operating-points = <
+ 1200000 1250000
+ 1000000 1150000
+ 800000 1075000
+ 500000 975000
+ 400000 975000
+ 200000 950000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi
index 7b43c10c510b..51f72f0327e5 100644
--- a/arch/arm/boot/dts/exynos4412.dtsi
+++ b/arch/arm/boot/dts/exynos4412.dtsi
@@ -49,21 +49,30 @@
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA01>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu at a02 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA02>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
cpu at a03 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0xA03>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>; /* min followed by max */
};
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 2daf505b3d08..69648f83b8b4 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -84,6 +84,29 @@
compatible = "arm,cortex-a15";
reg = <1>;
clock-frequency = <1700000000>;
+ clocks = <&clock CLK_ARM_CLK>;
+ clock-names = "cpu";
+ clock-latency = <140000>;
+
+ operating-points = <
+ 1700000 1300000
+ 1600000 1250000
+ 1500000 1225000
+ 1400000 1200000
+ 1300000 1150000
+ 1200000 1125000
+ 1100000 1100000
+ 1000000 1075000
+ 900000 1050000
+ 800000 1025000
+ 700000 1012500
+ 600000 1000000
+ 500000 975000
+ 400000 950000
+ 300000 937500
+ 200000 925000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 08/15] arm: dts: dra74x: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
` (8 preceding siblings ...)
(?)
@ 2018-05-25 10:31 ` Viresh Kumar
2018-07-03 6:43 ` Tony Lindgren
-1 siblings, 1 reply; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Benoît Cousson, Tony Lindgren, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-omap, devicetree, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, supply, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/dra74x.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 91e93ab588ca..8f9df09155d8 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -18,6 +18,16 @@
compatible = "arm,cortex-a15";
reg = <1>;
operating-points-v2 = <&cpu0_opp_table>;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
+
+ vbb-supply = <&abb_mpu>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 09/15] arm: dts: omap: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
` (9 preceding siblings ...)
(?)
@ 2018-05-25 10:31 ` Viresh Kumar
2018-07-03 6:44 ` Tony Lindgren
-1 siblings, 1 reply; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Benoît Cousson, Tony Lindgren, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-omap, devicetree, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, supply, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/omap5.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 732b61a0e990..574ac11c0489 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -61,6 +61,20 @@
device_type = "cpu";
compatible = "arm,cortex-a15";
reg = <0x1>;
+
+ operating-points = <
+ /* kHz uV */
+ 1000000 1060000
+ 1500000 1250000
+ >;
+
+ clocks = <&dpll_mpu_ck>;
+ clock-names = "cpu";
+
+ clock-latency = <300000>; /* From omap-cpufreq driver */
+
+ /* cooling options */
+ #cooling-cells = <2>; /* min followed by max */
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 10/15] arm: dts: rk3288: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Heiko Stuebner, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, linux-rockchip, devicetree,
linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index d7e49d29ace5..752a892847dd 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -122,18 +122,72 @@
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu2: cpu@502 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu3: cpu@503 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 10/15] arm: dts: rk3288: Add missing cooling device properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/rk3288.dtsi | 54 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index d7e49d29ace5..752a892847dd 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -122,18 +122,72 @@
compatible = "arm,cortex-a12";
reg = <0x501>;
resets = <&cru SRST_CORE1>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu2: cpu at 502 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x502>;
resets = <&cru SRST_CORE2>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu3: cpu at 503 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x503>;
resets = <&cru SRST_CORE3>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 11/15] arm: dts: berlin: Add missing OPP properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Jisheng Zhang, Sebastian Hesselbarth, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, devicetree, linux-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (clocks, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++
arch/arm/boot/dts/berlin2q.dtsi | 33 +++++++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index d575823c5750..487e9de53244 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -81,6 +81,16 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index bf3a6c9a1d34..9cd00ab53f2d 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -76,6 +76,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu@2 {
@@ -83,6 +94,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <2>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu@3 {
@@ -90,6 +112,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <3>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 11/15] arm: dts: berlin: Add missing OPP properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (clocks, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++
arch/arm/boot/dts/berlin2q.dtsi | 33 +++++++++++++++++++++++++++++++++
2 files changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index d575823c5750..487e9de53244 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -81,6 +81,16 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index bf3a6c9a1d34..9cd00ab53f2d 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -76,6 +76,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <1>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu at 2 {
@@ -83,6 +94,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <2>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
cpu at 3 {
@@ -90,6 +112,17 @@
device_type = "cpu";
next-level-cache = <&l2>;
reg = <3>;
+
+ clocks = <&chip_clk CLKID_CPU>;
+ clock-latency = <100000>;
+ /* Can be modified by the bootloader */
+ operating-points = <
+ /* kHz uV */
+ 1200000 1200000
+ 1000000 1200000
+ 800000 1200000
+ 600000 1200000
+ >;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:31 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, devicetree, linux-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing property (clock latency) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index ed14aeac0566..50278715de76 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -56,6 +56,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
cpu@902 {
@@ -65,6 +75,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
cpu@903 {
@@ -74,6 +94,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-05-25 10:31 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: linux-arm-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing property (clock latency) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts
index ed14aeac0566..50278715de76 100644
--- a/arch/arm/boot/dts/highbank.dts
+++ b/arch/arm/boot/dts/highbank.dts
@@ -56,6 +56,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
cpu at 902 {
@@ -65,6 +75,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
cpu at 903 {
@@ -74,6 +94,16 @@
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
+ operating-points = <
+ /* kHz ignored */
+ 1300000 1000000
+ 1200000 1000000
+ 1100000 1000000
+ 800000 1000000
+ 400000 1000000
+ 200000 1000000
+ >;
+ clock-latency = <100000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
` (13 preceding siblings ...)
(?)
@ 2018-05-25 10:31 ` Viresh Kumar
2018-05-28 9:23 ` Simon Horman
2018-05-30 4:46 ` [PATCH V2 13/15] arm: dts: r8a77xx: " Viresh Kumar
-1 siblings, 2 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:31 UTC (permalink / raw)
To: arm, Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-renesas-soc, devicetree, linux-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing property (clock latency) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/r8a7743.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 142949d7066f..e4fb31c4f0ee 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -98,8 +98,17 @@
reg = <1>;
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
};
L2_CA15: cache-controller-0 {
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
` (14 preceding siblings ...)
(?)
@ 2018-05-25 10:32 ` Viresh Kumar
2018-07-18 6:08 ` Viresh Kumar
2018-07-18 10:22 ` Amit Kucheria
-1 siblings, 2 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:32 UTC (permalink / raw)
To: arm, Andy Gross, David Brown, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-msm, linux-soc, devicetree,
linux-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing property (clock latency) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b25daf368012..8c202b359270 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -75,6 +75,14 @@
reg = <0x1>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
+ operating-points = <
+ /* kHz uV (fixed) */
+ 48000 1100000
+ 200000 1100000
+ 500000 1100000
+ 666000 1100000
+ >;
+ clock-latency = <256000>;
};
cpu@2 {
@@ -86,6 +94,14 @@
reg = <0x2>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
+ operating-points = <
+ /* kHz uV (fixed) */
+ 48000 1100000
+ 200000 1100000
+ 500000 1100000
+ 666000 1100000
+ >;
+ clock-latency = <256000>;
};
cpu@3 {
@@ -97,6 +113,14 @@
reg = <0x3>;
clocks = <&gcc GCC_APPS_CLK_SRC>;
clock-frequency = <0>;
+ operating-points = <
+ /* kHz uV (fixed) */
+ 48000 1100000
+ 200000 1100000
+ 500000 1100000
+ 666000 1100000
+ >;
+ clock-latency = <256000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-25 10:32 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:32 UTC (permalink / raw)
To: arm, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-arm-kernel, devicetree, linux-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (like clocks, supply, clock latency) as
well to make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/imx6dl.dtsi | 23 ++++++++++
arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 87 ++++++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx7d.dtsi | 5 +++
4 files changed, 178 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index b384913c34dd..cc8ffc42d128 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -50,6 +50,29 @@
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 65ef4cacbc71..18ae4f3be6e3 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -187,6 +187,72 @@
>;
};
+&cpu1 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&cpu2 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&cpu3 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
&ecspi1 {
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 70483ce72ba6..78b89bb1bfed 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -50,25 +50,106 @@
soc-supply = <®_soc>;
};
- cpu@1 {
+ cpu1: cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
- cpu@2 {
+ cpu2: cpu@2 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
- cpu@3 {
+ cpu3: cpu@3 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 4c9877ec29f2..5434a8aa5602 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -21,6 +21,11 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ operating-points = <
+ /* KHz uV */
+ 996000 1075000
+ 792000 975000
+ >;
clock-frequency = <996000000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
@ 2018-05-25 10:32 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-25 10:32 UTC (permalink / raw)
To: linux-arm-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (like clocks, supply, clock latency) as
well to make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/imx6dl.dtsi | 23 ++++++++++
arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6q.dtsi | 87 ++++++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/imx7d.dtsi | 5 +++
4 files changed, 178 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index b384913c34dd..cc8ffc42d128 100644
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -50,6 +50,29 @@
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1150000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1175000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
};
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index 65ef4cacbc71..18ae4f3be6e3 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -187,6 +187,72 @@
>;
};
+&cpu1 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&cpu2 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
+&cpu3 {
+ /*
+ * Although the imx6q fuse indicates that 1.2GHz operation is possible,
+ * the module behaves unstable at this frequency. Hence, remove the
+ * 1.2GHz operation point here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+};
+
&ecspi1 {
cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 70483ce72ba6..78b89bb1bfed 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -50,25 +50,106 @@
soc-supply = <®_soc>;
};
- cpu at 1 {
+ cpu1: cpu at 1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
- cpu at 2 {
+ cpu2: cpu at 2 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
- cpu at 3 {
+ cpu3: cpu at 3 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
+ operating-points = <
+ /* kHz uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 975000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC-PU uV */
+ 1200000 1275000
+ 996000 1250000
+ 852000 1250000
+ 792000 1175000
+ 396000 1175000
+ >;
+ clock-latency = <61036>; /* two CLK32 periods */
+ clocks = <&clks IMX6QDL_CLK_ARM>,
+ <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+ <&clks IMX6QDL_CLK_STEP>,
+ <&clks IMX6QDL_CLK_PLL1_SW>,
+ <&clks IMX6QDL_CLK_PLL1_SYS>;
+ clock-names = "arm", "pll2_pfd2_396m", "step",
+ "pll1_sw", "pll1_sys";
+ arm-supply = <®_arm>;
+ pu-supply = <®_pu>;
+ soc-supply = <®_soc>;
};
};
diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
index 4c9877ec29f2..5434a8aa5602 100644
--- a/arch/arm/boot/dts/imx7d.dtsi
+++ b/arch/arm/boot/dts/imx7d.dtsi
@@ -21,6 +21,11 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ operating-points = <
+ /* KHz uV */
+ 996000 1075000
+ 792000 975000
+ >;
clock-frequency = <996000000>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* Re: [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
2018-05-25 10:32 ` Viresh Kumar
@ 2018-05-25 11:46 ` Lucas Stach
-1 siblings, 0 replies; 107+ messages in thread
From: Lucas Stach @ 2018-05-25 11:46 UTC (permalink / raw)
To: Viresh Kumar, arm, Shawn Guo, Sascha Hauer,
Pengutronix Kernel Team, Fabio Estevam, Rob Herring,
Mark Rutland
Cc: devicetree, Vincent Guittot, Daniel Lezcano, linux-kernel,
chris.redpath, ionela.voinescu, linux-arm-kernel
Hi Viresh,
Am Freitag, den 25.05.2018, 16:02 +0530 schrieb Viresh Kumar:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like clocks, supply, clock latency) as
> well to make it all work.
This is a lot of duplicate information for what is effectively a shared
cluster wide thing. This does absolutely not _feel_ right.
What problem are you solving here? Why do we need all this duplicate
information? Why can't we fix it by falling back to looking at cpu0 if
needed?
Regards,
Lucas
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/imx6dl.dtsi | 23 ++++++++++
> arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/imx6q.dtsi | 87 ++++++++++++++++++++++++++++++++++++--
> arch/arm/boot/dts/imx7d.dtsi | 5 +++
> 4 files changed, 178 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> index b384913c34dd..cc8ffc42d128 100644
> --- a/arch/arm/boot/dts/imx6dl.dtsi
> +++ b/arch/arm/boot/dts/imx6dl.dtsi
> @@ -50,6 +50,29 @@
> > device_type = "cpu";
> > reg = <1>;
> > next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz uV */
> > + 996000 1250000
> > + 792000 1175000
> > + 396000 1150000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz SOC-PU uV */
> > > + 996000 1175000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + <&clks IMX6QDL_CLK_STEP>,
> > + <&clks IMX6QDL_CLK_PLL1_SW>,
> > + <&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + "pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > };
> > };
>
> diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
> index 65ef4cacbc71..18ae4f3be6e3 100644
> --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
> +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
> @@ -187,6 +187,72 @@
> > >;
> };
>
> +&cpu1 {
> > + /*
> > + * Although the imx6q fuse indicates that 1.2GHz operation is possible,
> > + * the module behaves unstable at this frequency. Hence, remove the
> > + * 1.2GHz operation point here.
> > + */
> > + operating-points = <
> > > + /* kHz uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > > + /* ARM kHz SOC-PU uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> +};
> +
> +&cpu2 {
> > + /*
> > + * Although the imx6q fuse indicates that 1.2GHz operation is possible,
> > + * the module behaves unstable at this frequency. Hence, remove the
> > + * 1.2GHz operation point here.
> > + */
> > + operating-points = <
> > > + /* kHz uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > > + /* ARM kHz SOC-PU uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> +};
> +
> +&cpu3 {
> > + /*
> > + * Although the imx6q fuse indicates that 1.2GHz operation is possible,
> > + * the module behaves unstable at this frequency. Hence, remove the
> > + * 1.2GHz operation point here.
> > + */
> > + operating-points = <
> > > + /* kHz uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > > + /* ARM kHz SOC-PU uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> +};
> +
> &ecspi1 {
> > cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
> > pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index 70483ce72ba6..78b89bb1bfed 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -50,25 +50,106 @@
> > soc-supply = <®_soc>;
> > };
>
> > - cpu@1 {
> > > + cpu1: cpu@1 {
> > compatible = "arm,cortex-a9";
> > device_type = "cpu";
> > reg = <1>;
> > next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz uV */
> > + 1200000 1275000
> > + 996000 1250000
> > + 852000 1250000
> > + 792000 1175000
> > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz SOC-PU uV */
> > + 1200000 1275000
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + <&clks IMX6QDL_CLK_STEP>,
> > + <&clks IMX6QDL_CLK_PLL1_SW>,
> > + <&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + "pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > };
>
> > - cpu@2 {
> > > + cpu2: cpu@2 {
> > compatible = "arm,cortex-a9";
> > device_type = "cpu";
> > reg = <2>;
> > next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz uV */
> > + 1200000 1275000
> > + 996000 1250000
> > + 852000 1250000
> > + 792000 1175000
> > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz SOC-PU uV */
> > + 1200000 1275000
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + <&clks IMX6QDL_CLK_STEP>,
> > + <&clks IMX6QDL_CLK_PLL1_SW>,
> > + <&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + "pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > };
>
> > - cpu@3 {
> > > + cpu3: cpu@3 {
> > compatible = "arm,cortex-a9";
> > device_type = "cpu";
> > reg = <3>;
> > next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz uV */
> > + 1200000 1275000
> > + 996000 1250000
> > + 852000 1250000
> > + 792000 1175000
> > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz SOC-PU uV */
> > + 1200000 1275000
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + <&clks IMX6QDL_CLK_STEP>,
> > + <&clks IMX6QDL_CLK_PLL1_SW>,
> > + <&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + "pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > };
> > };
>
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 4c9877ec29f2..5434a8aa5602 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -21,6 +21,11 @@
> > compatible = "arm,cortex-a7";
> > device_type = "cpu";
> > reg = <1>;
> > + operating-points = <
> > > + /* KHz uV */
> > > + 996000 1075000
> > > + 792000 975000
> > + >;
> > clock-frequency = <996000000>;
> > };
> > };
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
@ 2018-05-25 11:46 ` Lucas Stach
0 siblings, 0 replies; 107+ messages in thread
From: Lucas Stach @ 2018-05-25 11:46 UTC (permalink / raw)
To: linux-arm-kernel
Hi Viresh,
Am Freitag, den 25.05.2018, 16:02 +0530 schrieb Viresh Kumar:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like clocks, supply, clock latency) as
> well to make it all work.
This is a lot of duplicate information for what is effectively a shared
cluster wide thing. This does absolutely not _feel_ right.
What problem are you solving here? Why do we need all this duplicate
information? Why can't we fix it by falling back to looking at cpu0 if
needed?
Regards,
Lucas
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> ?arch/arm/boot/dts/imx6dl.dtsi??????| 23 ++++++++++
> ?arch/arm/boot/dts/imx6q-cm-fx6.dts | 66 +++++++++++++++++++++++++++++
> ?arch/arm/boot/dts/imx6q.dtsi???????| 87 ++++++++++++++++++++++++++++++++++++--
> ?arch/arm/boot/dts/imx7d.dtsi???????|??5 +++
> ?4 files changed, 178 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
> index b384913c34dd..cc8ffc42d128 100644
> --- a/arch/arm/boot/dts/imx6dl.dtsi
> +++ b/arch/arm/boot/dts/imx6dl.dtsi
> @@ -50,6 +50,29 @@
> > ? device_type = "cpu";
> > ? reg = <1>;
> > ? next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz????uV */
> > + 996000??1250000
> > + 792000??1175000
> > + 396000??1150000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz??SOC-PU uV */
> > > + 996000 1175000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + ?<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + ?<&clks IMX6QDL_CLK_STEP>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SW>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + ??????"pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > ? };
> > ? };
> ?
> diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
> index 65ef4cacbc71..18ae4f3be6e3 100644
> --- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
> +++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
> @@ -187,6 +187,72 @@
> > ? >;
> ?};
> ?
> +&cpu1 {
> > + /*
> > + ?* Although the imx6q fuse indicates that 1.2GHz operation is possible,
> > + ?* the module behaves unstable at this frequency. Hence, remove the
> > + ?* 1.2GHz operation point here.
> > + ?*/
> > + operating-points = <
> > > + /* kHz uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > > + /* ARM kHz SOC-PU uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> +};
> +
> +&cpu2 {
> > + /*
> > + ?* Although the imx6q fuse indicates that 1.2GHz operation is possible,
> > + ?* the module behaves unstable at this frequency. Hence, remove the
> > + ?* 1.2GHz operation point here.
> > + ?*/
> > + operating-points = <
> > > + /* kHz uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > > + /* ARM kHz SOC-PU uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> +};
> +
> +&cpu3 {
> > + /*
> > + ?* Although the imx6q fuse indicates that 1.2GHz operation is possible,
> > + ?* the module behaves unstable at this frequency. Hence, remove the
> > + ?* 1.2GHz operation point here.
> > + ?*/
> > + operating-points = <
> > > + /* kHz uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 975000
> > + >;
> > + fsl,soc-operating-points = <
> > > + /* ARM kHz SOC-PU uV */
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> +};
> +
> ?&ecspi1 {
> > ? cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio3 19 GPIO_ACTIVE_HIGH>;
> > ? pinctrl-names = "default";
> diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
> index 70483ce72ba6..78b89bb1bfed 100644
> --- a/arch/arm/boot/dts/imx6q.dtsi
> +++ b/arch/arm/boot/dts/imx6q.dtsi
> @@ -50,25 +50,106 @@
> > ? soc-supply = <®_soc>;
> > ? };
> ?
> > - cpu at 1 {
> > > + cpu1: cpu at 1 {
> > ? compatible = "arm,cortex-a9";
> > ? device_type = "cpu";
> > ? reg = <1>;
> > ? next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz????uV */
> > + 1200000 1275000
> > + 996000??1250000
> > + 852000??1250000
> > + 792000??1175000
> > + 396000??975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz??SOC-PU uV */
> > + 1200000 1275000
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + ?<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + ?<&clks IMX6QDL_CLK_STEP>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SW>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + ??????"pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > ? };
> ?
> > - cpu at 2 {
> > > + cpu2: cpu at 2 {
> > ? compatible = "arm,cortex-a9";
> > ? device_type = "cpu";
> > ? reg = <2>;
> > ? next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz????uV */
> > + 1200000 1275000
> > + 996000??1250000
> > + 852000??1250000
> > + 792000??1175000
> > + 396000??975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz??SOC-PU uV */
> > + 1200000 1275000
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + ?<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + ?<&clks IMX6QDL_CLK_STEP>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SW>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + ??????"pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > ? };
> ?
> > - cpu at 3 {
> > > + cpu3: cpu at 3 {
> > ? compatible = "arm,cortex-a9";
> > ? device_type = "cpu";
> > ? reg = <3>;
> > ? next-level-cache = <&L2>;
> > + operating-points = <
> > + /* kHz????uV */
> > + 1200000 1275000
> > + 996000??1250000
> > + 852000??1250000
> > + 792000??1175000
> > + 396000??975000
> > + >;
> > + fsl,soc-operating-points = <
> > + /* ARM kHz??SOC-PU uV */
> > + 1200000 1275000
> > > + 996000 1250000
> > > + 852000 1250000
> > > + 792000 1175000
> > > + 396000 1175000
> > + >;
> > + clock-latency = <61036>; /* two CLK32 periods */
> > + clocks = <&clks IMX6QDL_CLK_ARM>,
> > + ?<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
> > + ?<&clks IMX6QDL_CLK_STEP>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SW>,
> > + ?<&clks IMX6QDL_CLK_PLL1_SYS>;
> > + clock-names = "arm", "pll2_pfd2_396m", "step",
> > + ??????"pll1_sw", "pll1_sys";
> > + arm-supply = <®_arm>;
> > + pu-supply = <®_pu>;
> > + soc-supply = <®_soc>;
> > ? };
> > ? };
> ?
> diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi
> index 4c9877ec29f2..5434a8aa5602 100644
> --- a/arch/arm/boot/dts/imx7d.dtsi
> +++ b/arch/arm/boot/dts/imx7d.dtsi
> @@ -21,6 +21,11 @@
> > ? compatible = "arm,cortex-a7";
> > ? device_type = "cpu";
> > ? reg = <1>;
> > + operating-points = <
> > > + /* KHz uV */
> > > + 996000 1075000
> > > + 792000 975000
> > + >;
> > ? clock-frequency = <996000000>;
> > ? };
> > ? };
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-28 8:44 ` Maxime Ripard
-1 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-05-28 8:44 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Chen-Yu Tsai, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1020 bytes --]
Hi,
On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The prefix should be sunxi and not sun, but it looks good to me
otherwise.
Let me know what your preferred merge method is.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
@ 2018-05-28 8:44 ` Maxime Ripard
0 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-05-28 8:44 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The prefix should be sunxi and not sun, but it looks good to me
otherwise.
Let me know what your preferred merge method is.
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180528/a2bdcdbe/attachment.sig>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs
2018-05-25 10:31 ` [PATCH 13/15] arm: dts: r8a7743: " Viresh Kumar
@ 2018-05-28 9:23 ` Simon Horman
2018-05-28 10:58 ` Viresh Kumar
2018-05-30 4:46 ` [PATCH V2 13/15] arm: dts: r8a77xx: " Viresh Kumar
1 sibling, 1 reply; 107+ messages in thread
From: Simon Horman @ 2018-05-28 9:23 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Magnus Damm, Rob Herring, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel, Biju Das
[Cc Biju Das]
On Fri, May 25, 2018 at 04:01:59PM +0530, Viresh Kumar wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Thanks, this looks good to me and it looks like it should have:
Fixes: 0417814ea140 ("ARM: dts: r8a7743: Add OPP table for frequency scaling")
Biju, as the author of the above patch could you take a look over this fix?
> ---
> arch/arm/boot/dts/r8a7743.dtsi | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
> index 142949d7066f..e4fb31c4f0ee 100644
> --- a/arch/arm/boot/dts/r8a7743.dtsi
> +++ b/arch/arm/boot/dts/r8a7743.dtsi
> @@ -98,8 +98,17 @@
> reg = <1>;
> clock-frequency = <1500000000>;
> clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
> + clock-latency = <300000>; /* 300 us */
> power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
> next-level-cache = <&L2_CA15>;
> +
> + /* kHz - uV - OPPs unknown yet */
> + operating-points = <1500000 1000000>,
> + <1312500 1000000>,
> + <1125000 1000000>,
> + < 937500 1000000>,
> + < 750000 1000000>,
> + < 375000 1000000>;
> };
>
> L2_CA15: cache-controller-0 {
> --
> 2.15.0.194.g9af6a3dea062
>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
2018-05-28 8:44 ` Maxime Ripard
(?)
@ 2018-05-28 10:57 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-28 10:57 UTC (permalink / raw)
To: Maxime Ripard
Cc: arm, Rob Herring, Mark Rutland, Chen-Yu Tsai, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-kernel
On 28-05-18, 10:44, Maxime Ripard wrote:
> Hi,
>
> On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> > The cooling device properties, like "#cooling-cells" and
> > "dynamic-power-coefficient", should either be present for all the CPUs
> > of a cluster or none. If these are present only for a subset of CPUs of
> > a cluster then things will start falling apart as soon as the CPUs are
> > brought online in a different order. For example, this will happen
> > because the operating system looks for such properties in the CPU node
> > it is trying to bring up, so that it can register a cooling device.
> >
> > Add such missing properties.
> >
> > Fix other missing properties (clocks, OPP, clock latency) as well to
> > make it all work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> The prefix should be sunxi and not sun, but it looks good to me
> otherwise.
>
> Let me know what your preferred merge method is.
Please pick it up directly and send it as part of your pull request.
Do you want me to resend or can you fix the $subject ?
Thanks.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
@ 2018-05-28 10:57 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-28 10:57 UTC (permalink / raw)
To: Maxime Ripard
Cc: Mark Rutland, devicetree, Vincent Guittot, Daniel Lezcano,
linux-kernel, Rob Herring, Chen-Yu Tsai, arm, chris.redpath,
ionela.voinescu, linux-arm-kernel
On 28-05-18, 10:44, Maxime Ripard wrote:
> Hi,
>
> On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> > The cooling device properties, like "#cooling-cells" and
> > "dynamic-power-coefficient", should either be present for all the CPUs
> > of a cluster or none. If these are present only for a subset of CPUs of
> > a cluster then things will start falling apart as soon as the CPUs are
> > brought online in a different order. For example, this will happen
> > because the operating system looks for such properties in the CPU node
> > it is trying to bring up, so that it can register a cooling device.
> >
> > Add such missing properties.
> >
> > Fix other missing properties (clocks, OPP, clock latency) as well to
> > make it all work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> The prefix should be sunxi and not sun, but it looks good to me
> otherwise.
>
> Let me know what your preferred merge method is.
Please pick it up directly and send it as part of your pull request.
Do you want me to resend or can you fix the $subject ?
Thanks.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
@ 2018-05-28 10:57 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-28 10:57 UTC (permalink / raw)
To: linux-arm-kernel
On 28-05-18, 10:44, Maxime Ripard wrote:
> Hi,
>
> On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> > The cooling device properties, like "#cooling-cells" and
> > "dynamic-power-coefficient", should either be present for all the CPUs
> > of a cluster or none. If these are present only for a subset of CPUs of
> > a cluster then things will start falling apart as soon as the CPUs are
> > brought online in a different order. For example, this will happen
> > because the operating system looks for such properties in the CPU node
> > it is trying to bring up, so that it can register a cooling device.
> >
> > Add such missing properties.
> >
> > Fix other missing properties (clocks, OPP, clock latency) as well to
> > make it all work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> The prefix should be sunxi and not sun, but it looks good to me
> otherwise.
>
> Let me know what your preferred merge method is.
Please pick it up directly and send it as part of your pull request.
Do you want me to resend or can you fix the $subject ?
Thanks.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs
2018-05-28 9:23 ` Simon Horman
@ 2018-05-28 10:58 ` Viresh Kumar
2018-05-28 11:58 ` Simon Horman
0 siblings, 1 reply; 107+ messages in thread
From: Viresh Kumar @ 2018-05-28 10:58 UTC (permalink / raw)
To: Simon Horman
Cc: arm, Magnus Damm, Rob Herring, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel, Biju Das
On 28-05-18, 11:23, Simon Horman wrote:
> [Cc Biju Das]
>
> On Fri, May 25, 2018 at 04:01:59PM +0530, Viresh Kumar wrote:
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster then things will start falling apart as soon
> > as the CPUs are brought online in a different order. For example, this
> > will happen because the operating system looks for such properties in
> > the CPU node it is trying to bring up, so that it can create an OPP
> > table.
> >
> > Add such missing properties.
> >
> > Fix other missing property (clock latency) as well to make it all
> > work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> Thanks, this looks good to me and it looks like it should have:
>
> Fixes: 0417814ea140 ("ARM: dts: r8a7743: Add OPP table for frequency scaling")
Sure.
Will you be picking this patch directly and send it part of your pull
request ? Maybe add Fixes tag then only ?
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
2018-05-25 11:46 ` Lucas Stach
@ 2018-05-28 11:07 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-28 11:07 UTC (permalink / raw)
To: Lucas Stach
Cc: arm, Shawn Guo, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Rob Herring, Mark Rutland, devicetree,
Vincent Guittot, Daniel Lezcano, linux-kernel, chris.redpath,
ionela.voinescu, linux-arm-kernel
Hi Lucas,
On 25-05-18, 13:46, Lucas Stach wrote:
> This is a lot of duplicate information for what is effectively a shared
> cluster wide thing. This does absolutely not _feel_ right.
I cannot agree more :)
> What problem are you solving here? Why do we need all this duplicate
> information? Why can't we fix it by falling back to looking at cpu0 if
> needed?
Let me try explaining one of the problem scenarios to you as your
platform is a single cluster one. Make cpufreq driver as module, don't
insert it, hotplug out CPU0 and now insert the cpufreq driver. The
cpufreq core will try adding the cpufreq policy for CPU1 but wouldn't
find the required information in the DT node of CPU1 and so will fail
or behave incorrectly.
We can't look at CPU0 as we don't know they are related at all.
Nothing tells that to us. The right solution to fix the duplication is
to move to OPP-v2 bindings, which allow us to create a single OPP
table node and refer to it from all the CPU nodes. Because in case of
imx platforms getting updated here, we use the old and some platforms
specific frequency tables, we have to duplicate it everywhere.
But looking from DT otherwise, all the device should anyway have all
the information required right in their node. That can be simplified
with things like phandle to opp-v2 node, but still everything needs to
be there. We shouldn't really rely on other CPU nodes to make it work.
That would be an incomplete definition of the hardware IMHO.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
@ 2018-05-28 11:07 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-28 11:07 UTC (permalink / raw)
To: linux-arm-kernel
Hi Lucas,
On 25-05-18, 13:46, Lucas Stach wrote:
> This is a lot of duplicate information for what is effectively a shared
> cluster wide thing. This does absolutely not _feel_ right.
I cannot agree more :)
> What problem are you solving here? Why do we need all this duplicate
> information? Why can't we fix it by falling back to looking at cpu0 if
> needed?
Let me try explaining one of the problem scenarios to you as your
platform is a single cluster one. Make cpufreq driver as module, don't
insert it, hotplug out CPU0 and now insert the cpufreq driver. The
cpufreq core will try adding the cpufreq policy for CPU1 but wouldn't
find the required information in the DT node of CPU1 and so will fail
or behave incorrectly.
We can't look at CPU0 as we don't know they are related at all.
Nothing tells that to us. The right solution to fix the duplication is
to move to OPP-v2 bindings, which allow us to create a single OPP
table node and refer to it from all the CPU nodes. Because in case of
imx platforms getting updated here, we use the old and some platforms
specific frequency tables, we have to duplicate it everywhere.
But looking from DT otherwise, all the device should anyway have all
the information required right in their node. That can be simplified
with things like phandle to opp-v2 node, but still everything needs to
be there. We shouldn't really rely on other CPU nodes to make it work.
That would be an incomplete definition of the hardware IMHO.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs
2018-05-28 10:58 ` Viresh Kumar
@ 2018-05-28 11:58 ` Simon Horman
2018-05-29 13:33 ` Biju Das
0 siblings, 1 reply; 107+ messages in thread
From: Simon Horman @ 2018-05-28 11:58 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Magnus Damm, Rob Herring, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel, Biju Das
On Mon, May 28, 2018 at 04:28:31PM +0530, Viresh Kumar wrote:
> On 28-05-18, 11:23, Simon Horman wrote:
> > [Cc Biju Das]
> >
> > On Fri, May 25, 2018 at 04:01:59PM +0530, Viresh Kumar wrote:
> > > The OPP properties, like "operating-points", should either be present
> > > for all the CPUs of a cluster or none. If these are present only for a
> > > subset of CPUs of a cluster then things will start falling apart as soon
> > > as the CPUs are brought online in a different order. For example, this
> > > will happen because the operating system looks for such properties in
> > > the CPU node it is trying to bring up, so that it can create an OPP
> > > table.
> > >
> > > Add such missing properties.
> > >
> > > Fix other missing property (clock latency) as well to make it all
> > > work.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > Thanks, this looks good to me and it looks like it should have:
> >
> > Fixes: 0417814ea140 ("ARM: dts: r8a7743: Add OPP table for frequency scaling")
>
> Sure.
>
> Will you be picking this patch directly and send it part of your pull
> request ? Maybe add Fixes tag then only ?
Yes, that is my plan. I can handle adding the Fixes tag.
But I'll wait to see if Bjiu has an feedback first.
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name
2018-05-25 10:31 ` Viresh Kumar
(?)
@ 2018-05-28 14:53 ` Gregory CLEMENT
-1 siblings, 0 replies; 107+ messages in thread
From: Gregory CLEMENT @ 2018-05-28 14:53 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Jason Cooper, Andrew Lunn, Sebastian Hesselbarth,
Rob Herring, Mark Rutland, Vincent Guittot, ionela.voinescu,
Daniel Lezcano, chris.redpath, linux-arm-kernel, devicetree,
linux-kernel
Hi Viresh,
On ven., mai 25 2018, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> It should be "#cooling-cells" instead of "cooling-cells". Fix it.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied on mvebu/fixes
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> index 6782ce481ac9..d8769956cbfc 100644
> --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
> +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> @@ -139,7 +139,7 @@
> 3700 5
> 3900 6
> 4000 7>;
> - cooling-cells = <2>;
> + #cooling-cells = <2>;
> };
>
> gpio-leds {
> --
> 2.15.0.194.g9af6a3dea062
>
--
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name
@ 2018-05-28 14:53 ` Gregory CLEMENT
0 siblings, 0 replies; 107+ messages in thread
From: Gregory CLEMENT @ 2018-05-28 14:53 UTC (permalink / raw)
To: Viresh Kumar
Cc: Mark Rutland, Andrew Lunn, Vincent Guittot, Jason Cooper,
devicetree, Daniel Lezcano, linux-kernel, Rob Herring, arm,
chris.redpath, ionela.voinescu, linux-arm-kernel,
Sebastian Hesselbarth
Hi Viresh,
On ven., mai 25 2018, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> It should be "#cooling-cells" instead of "cooling-cells". Fix it.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied on mvebu/fixes
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> index 6782ce481ac9..d8769956cbfc 100644
> --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
> +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> @@ -139,7 +139,7 @@
> 3700 5
> 3900 6
> 4000 7>;
> - cooling-cells = <2>;
> + #cooling-cells = <2>;
> };
>
> gpio-leds {
> --
> 2.15.0.194.g9af6a3dea062
>
--
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name
@ 2018-05-28 14:53 ` Gregory CLEMENT
0 siblings, 0 replies; 107+ messages in thread
From: Gregory CLEMENT @ 2018-05-28 14:53 UTC (permalink / raw)
To: linux-arm-kernel
Hi Viresh,
On ven., mai 25 2018, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> It should be "#cooling-cells" instead of "cooling-cells". Fix it.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied on mvebu/fixes
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-385-synology-ds116.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/armada-385-synology-ds116.dts b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> index 6782ce481ac9..d8769956cbfc 100644
> --- a/arch/arm/boot/dts/armada-385-synology-ds116.dts
> +++ b/arch/arm/boot/dts/armada-385-synology-ds116.dts
> @@ -139,7 +139,7 @@
> 3700 5
> 3900 6
> 4000 7>;
> - cooling-cells = <2>;
> + #cooling-cells = <2>;
> };
>
> gpio-leds {
> --
> 2.15.0.194.g9af6a3dea062
>
--
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-05-29 13:18 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 107+ messages in thread
From: Krzysztof Kozlowski @ 2018-05-29 13:18 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Kukjin Kim, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On Fri, May 25, 2018 at 12:31 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order.
Thanks for the patch.
In case of Exynos, the booting CPU always has these information in DT
and the booting CPU cannot be changed (chosen by firmware/hardware
configuration). Therefore there is no real risk of falling although
for correctness of DT your change makes sense.
It is too late for this cycle for me so I'll pick it up after merge window.
Alternatively, arm-soc guys can pick it up directly with my tag:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
> For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 13 +++++++++++++
> arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
> arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++++++++++++++++++
> 4 files changed, 61 insertions(+)
>
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
@ 2018-05-29 13:18 ` Krzysztof Kozlowski
0 siblings, 0 replies; 107+ messages in thread
From: Krzysztof Kozlowski @ 2018-05-29 13:18 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 25, 2018 at 12:31 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order.
Thanks for the patch.
In case of Exynos, the booting CPU always has these information in DT
and the booting CPU cannot be changed (chosen by firmware/hardware
configuration). Therefore there is no real risk of falling although
for correctness of DT your change makes sense.
It is too late for this cycle for me so I'll pick it up after merge window.
Alternatively, arm-soc guys can pick it up directly with my tag:
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
> For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 13 +++++++++++++
> arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
> arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++++++++++++++++++
> 4 files changed, 61 insertions(+)
>
^ permalink raw reply [flat|nested] 107+ messages in thread
* RE: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs
2018-05-28 11:58 ` Simon Horman
@ 2018-05-29 13:33 ` Biju Das
2018-05-30 4:47 ` Viresh Kumar
0 siblings, 1 reply; 107+ messages in thread
From: Biju Das @ 2018-05-29 13:33 UTC (permalink / raw)
To: Simon Horman, Viresh Kumar
Cc: arm, Magnus Damm, Rob Herring, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel
Hi All,
I have tested this patch on RZ/G1M and I didn't find any issues. r8a7743 is similar to r8a7791. So I assume you will apply the same patch for other R-SoC devices as well.
Apart from this, maybe we need to update the OPP binding documentation. i.e., extend the operating- point usage to other cores in the cluster (Binding 1: operating-points).
Regards,
Biju
> -----Original Message-----
> From: Simon Horman [mailto:horms@verge.net.au]
> Sent: 28 May 2018 12:59
> To: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: arm@kernel.org; Magnus Damm <magnus.damm@gmail.com>; Rob
> Herring <robh+dt@kernel.org>; Mark Rutland <mark.rutland@arm.com>;
> Vincent Guittot <vincent.guittot@linaro.org>; ionela.voinescu@arm.com;
> Daniel Lezcano <daniel.lezcano@linaro.org>; chris.redpath@arm.com; linux-
> renesas-soc@vger.kernel.org; devicetree@vger.kernel.org; linux-
> kernel@vger.kernel.org; Biju Das <biju.das@bp.renesas.com>
> Subject: Re: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for
> CPUs
>
> On Mon, May 28, 2018 at 04:28:31PM +0530, Viresh Kumar wrote:
> > On 28-05-18, 11:23, Simon Horman wrote:
> > > [Cc Biju Das]
> > >
> > > On Fri, May 25, 2018 at 04:01:59PM +0530, Viresh Kumar wrote:
> > > > The OPP properties, like "operating-points", should either be
> > > > present for all the CPUs of a cluster or none. If these are
> > > > present only for a subset of CPUs of a cluster then things will
> > > > start falling apart as soon as the CPUs are brought online in a
> > > > different order. For example, this will happen because the
> > > > operating system looks for such properties in the CPU node it is
> > > > trying to bring up, so that it can create an OPP table.
> > > >
> > > > Add such missing properties.
> > > >
> > > > Fix other missing property (clock latency) as well to make it all
> > > > work.
> > > >
> > > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > >
> > > Thanks, this looks good to me and it looks like it should have:
> > >
> > > Fixes: 0417814ea140 ("ARM: dts: r8a7743: Add OPP table for frequency
> > > scaling")
> >
> > Sure.
> >
> > Will you be picking this patch directly and send it part of your pull
> > request ? Maybe add Fixes tag then only ?
>
> Yes, that is my plan. I can handle adding the Fixes tag.
> But I'll wait to see if Bjiu has an feedback first.
Renesas Electronics Europe Ltd, Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, UK. Registered in England & Wales under Registered No. 04586709.
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
2018-05-29 13:18 ` Krzysztof Kozlowski
@ 2018-05-30 4:38 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-30 4:38 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: arm, Rob Herring, Mark Rutland, Kukjin Kim, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On 29-05-18, 15:18, Krzysztof Kozlowski wrote:
> Thanks for the patch.
>
> In case of Exynos, the booting CPU always has these information in DT
> and the booting CPU cannot be changed (chosen by firmware/hardware
> configuration).
But can the booting CPU be offlined ?
If yes, then this is how things are broken right now.
Build cpufreq driver as module, boot kernel, hotplug out CPU0, insert
cpufreq driver and that will try to find these properties in CPU1.
> Therefore there is no real risk of falling although
> for correctness of DT your change makes sense.
>
> It is too late for this cycle for me so I'll pick it up after merge window.
> Alternatively, arm-soc guys can pick it up directly with my tag:
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
No worries, you can pick it up later on.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
@ 2018-05-30 4:38 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-30 4:38 UTC (permalink / raw)
To: linux-arm-kernel
On 29-05-18, 15:18, Krzysztof Kozlowski wrote:
> Thanks for the patch.
>
> In case of Exynos, the booting CPU always has these information in DT
> and the booting CPU cannot be changed (chosen by firmware/hardware
> configuration).
But can the booting CPU be offlined ?
If yes, then this is how things are broken right now.
Build cpufreq driver as module, boot kernel, hotplug out CPU0, insert
cpufreq driver and that will try to find these properties in CPU1.
> Therefore there is no real risk of falling although
> for correctness of DT your change makes sense.
>
> It is too late for this cycle for me so I'll pick it up after merge window.
> Alternatively, arm-soc guys can pick it up directly with my tag:
> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
No worries, you can pick it up later on.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH V2 13/15] arm: dts: r8a77xx: Add missing OPP properties for CPUs
2018-05-25 10:31 ` [PATCH 13/15] arm: dts: r8a7743: " Viresh Kumar
2018-05-28 9:23 ` Simon Horman
@ 2018-05-30 4:46 ` Viresh Kumar
2018-05-31 14:24 ` Simon Horman
` (2 more replies)
1 sibling, 3 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-30 4:46 UTC (permalink / raw)
To: arm, biju.das, Simon Horman, Magnus Damm, Rob Herring, Mark Rutland
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, linux-renesas-soc, devicetree, linux-kernel
The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.
Add such missing properties.
Fix other missing properties (like, clock latency, voltage tolerance,
etc) as well to make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
arch/arm/boot/dts/r8a7743.dtsi | 9 +++++++++
arch/arm/boot/dts/r8a7790.dtsi | 34 ++++++++++++++++++++++++++++++++--
arch/arm/boot/dts/r8a7791.dtsi | 14 ++++++++++++--
arch/arm/boot/dts/r8a7793.dtsi | 15 +++++++++++++--
4 files changed, 66 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index 142949d7066f..e4fb31c4f0ee 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -98,8 +98,17 @@
reg = <1>;
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7743_CLK_Z>;
+ clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7743_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
};
L2_CA15: cache-controller-0 {
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 4d06b154bd7e..c4324b1a2ec4 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -79,12 +79,12 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1300000000>;
- voltage-tolerance = <1>; /* 1% */
clocks = <&cpg CPG_CORE R8A7790_CLK_Z>;
- clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7790_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
/* kHz - uV - OPPs unknown yet */
operating-points = <1400000 1000000>,
@@ -104,6 +104,16 @@
power-domains = <&sysc R8A7790_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1400000 1000000>,
+ <1225000 1000000>,
+ <1050000 1000000>,
+ < 875000 1000000>,
+ < 700000 1000000>,
+ < 350000 1000000>;
};
cpu2: cpu@2 {
@@ -115,6 +125,16 @@
power-domains = <&sysc R8A7790_PD_CA15_CPU2>;
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1400000 1000000>,
+ <1225000 1000000>,
+ <1050000 1000000>,
+ < 875000 1000000>,
+ < 700000 1000000>,
+ < 350000 1000000>;
};
cpu3: cpu@3 {
@@ -126,6 +146,16 @@
power-domains = <&sysc R8A7790_PD_CA15_CPU3>;
next-level-cache = <&L2_CA15>;
capacity-dmips-mhz = <1024>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1400000 1000000>,
+ <1225000 1000000>,
+ <1050000 1000000>,
+ < 875000 1000000>,
+ < 700000 1000000>,
+ < 350000 1000000>;
};
cpu4: cpu@100 {
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6e1dd7ad7bd6..d1d726a1364a 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -78,11 +78,11 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
- voltage-tolerance = <1>; /* 1% */
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
- clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7791_PD_CA15_CPU0>;
next-level-cache = <&L2_CA15>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
/* kHz - uV - OPPs unknown yet */
operating-points = <1500000 1000000>,
@@ -101,6 +101,16 @@
clocks = <&cpg CPG_CORE R8A7791_CLK_Z>;
power-domains = <&sysc R8A7791_PD_CA15_CPU1>;
next-level-cache = <&L2_CA15>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
};
L2_CA15: cache-controller-0 {
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index 4abecfc0ca98..1e6439b85a6b 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -70,10 +70,10 @@
compatible = "arm,cortex-a15";
reg = <0>;
clock-frequency = <1500000000>;
- voltage-tolerance = <1>; /* 1% */
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
- clock-latency = <300000>; /* 300 us */
power-domains = <&sysc R8A7793_PD_CA15_CPU0>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
/* kHz - uV - OPPs unknown yet */
operating-points = <1500000 1000000>,
@@ -92,6 +92,17 @@
clock-frequency = <1500000000>;
clocks = <&cpg CPG_CORE R8A7793_CLK_Z>;
power-domains = <&sysc R8A7793_PD_CA15_CPU1>;
+ voltage-tolerance = <1>; /* 1% */
+ clock-latency = <300000>; /* 300 us */
+
+ /* kHz - uV - OPPs unknown yet */
+ operating-points = <1500000 1000000>,
+ <1312500 1000000>,
+ <1125000 1000000>,
+ < 937500 1000000>,
+ < 750000 1000000>,
+ < 375000 1000000>;
+ next-level-cache = <&L2_CA15>;
};
L2_CA15: cache-controller-0 {
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* Re: [PATCH 13/15] arm: dts: r8a7743: Add missing OPP properties for CPUs
2018-05-29 13:33 ` Biju Das
@ 2018-05-30 4:47 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-30 4:47 UTC (permalink / raw)
To: Biju Das
Cc: Simon Horman, arm, Magnus Damm, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel
On 29-05-18, 13:33, Biju Das wrote:
> Hi All,
>
> I have tested this patch on RZ/G1M and I didn't find any issues.
> r8a7743 is similar to r8a7791. So I assume you will apply the same
> patch for other R-SoC devices as well.
Okay, I have sent V2 for this and it fixes all those platforms as
well.
> Apart from this, maybe we need to update the OPP binding
> documentation. i.e., extend the operating- point usage to other
> cores in the cluster (Binding 1: operating-points).
Its already done, you need to start using operating-points-v2 property
to avoid duplication like this.
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
2018-05-30 4:38 ` Viresh Kumar
@ 2018-05-30 12:32 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 107+ messages in thread
From: Krzysztof Kozlowski @ 2018-05-30 12:32 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Kukjin Kim, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On Wed, May 30, 2018 at 6:38 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 29-05-18, 15:18, Krzysztof Kozlowski wrote:
>> Thanks for the patch.
>>
>> In case of Exynos, the booting CPU always has these information in DT
>> and the booting CPU cannot be changed (chosen by firmware/hardware
>> configuration).
>
> But can the booting CPU be offlined ?
>
> If yes, then this is how things are broken right now.
>
> Build cpufreq driver as module, boot kernel, hotplug out CPU0, insert
> cpufreq driver and that will try to find these properties in CPU1.
OK, I see the possibility although it is still far away from use
cases. You cannot hotplug booting CPU (CPU0) on Exynos kernels. It
never worked. Strictly speaking - offlining will work. But bringing it
online will likely hang the system.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
@ 2018-05-30 12:32 ` Krzysztof Kozlowski
0 siblings, 0 replies; 107+ messages in thread
From: Krzysztof Kozlowski @ 2018-05-30 12:32 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, May 30, 2018 at 6:38 AM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 29-05-18, 15:18, Krzysztof Kozlowski wrote:
>> Thanks for the patch.
>>
>> In case of Exynos, the booting CPU always has these information in DT
>> and the booting CPU cannot be changed (chosen by firmware/hardware
>> configuration).
>
> But can the booting CPU be offlined ?
>
> If yes, then this is how things are broken right now.
>
> Build cpufreq driver as module, boot kernel, hotplug out CPU0, insert
> cpufreq driver and that will try to find these properties in CPU1.
OK, I see the possibility although it is still far away from use
cases. You cannot hotplug booting CPU (CPU0) on Exynos kernels. It
never worked. Strictly speaking - offlining will work. But bringing it
online will likely hang the system.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
2018-05-30 12:32 ` Krzysztof Kozlowski
@ 2018-05-31 5:22 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-31 5:22 UTC (permalink / raw)
To: Krzysztof Kozlowski
Cc: arm, Rob Herring, Mark Rutland, Kukjin Kim, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On 30-05-18, 14:32, Krzysztof Kozlowski wrote:
> OK, I see the possibility although it is still far away from use
> cases. You cannot hotplug booting CPU (CPU0) on Exynos kernels. It
> never worked. Strictly speaking - offlining will work. But bringing it
> online will likely hang the system.
True and I used the following out of tree patch for a long time for my
dual A15 exynos to make hotplug work.
https://git.linaro.org/people/vireshk/backup/linux.git/commit/?h=bkp/exynos/hotplug&id=aab8a906a70b8f1fb15a4b7bd2ee27e6dcabf79d
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
@ 2018-05-31 5:22 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-05-31 5:22 UTC (permalink / raw)
To: linux-arm-kernel
On 30-05-18, 14:32, Krzysztof Kozlowski wrote:
> OK, I see the possibility although it is still far away from use
> cases. You cannot hotplug booting CPU (CPU0) on Exynos kernels. It
> never worked. Strictly speaking - offlining will work. But bringing it
> online will likely hang the system.
True and I used the following out of tree patch for a long time for my
dual A15 exynos to make hotplug work.
https://git.linaro.org/people/vireshk/backup/linux.git/commit/?h=bkp/exynos/hotplug&id=aab8a906a70b8f1fb15a4b7bd2ee27e6dcabf79d
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH V2 13/15] arm: dts: r8a77xx: Add missing OPP properties for CPUs
2018-05-30 4:46 ` [PATCH V2 13/15] arm: dts: r8a77xx: " Viresh Kumar
@ 2018-05-31 14:24 ` Simon Horman
2018-06-04 9:57 ` Simon Horman
2018-06-11 9:26 ` Geert Uytterhoeven
2 siblings, 0 replies; 107+ messages in thread
From: Simon Horman @ 2018-05-31 14:24 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, biju.das, Magnus Damm, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel
On Wed, May 30, 2018 at 10:16:58AM +0530, Viresh Kumar wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like, clock latency, voltage tolerance,
> etc) as well to make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
This looks fine but I will wait to see if there are other reviews before
applying.
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 05/15] arm: dts: uniphier: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-06-01 3:25 ` Masahiro Yamada
-1 siblings, 0 replies; 107+ messages in thread
From: Masahiro Yamada @ 2018-06-01 3:25 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm-soc, Rob Herring, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, DTML,
linux-arm-kernel, Linux Kernel Mailing List
2018-05-25 19:31 GMT+09:00 Viresh Kumar <viresh.kumar@linaro.org>:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied to linux-uniphier.
I had already sent a PR for v4.18-rc1 before I received this patch.
Please wait for v4.19-rc1.
Thanks.
> ---
> arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> index debcbd15c24b..40ed15465095 100644
> --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
> +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> @@ -36,6 +36,7 @@
> enable-method = "psci";
> next-level-cache = <&l2>;
> operating-points-v2 = <&cpu_opp>;
> + #cooling-cells = <2>;
> };
>
> cpu2: cpu@2 {
> @@ -46,6 +47,7 @@
> enable-method = "psci";
> next-level-cache = <&l2>;
> operating-points-v2 = <&cpu_opp>;
> + #cooling-cells = <2>;
> };
>
> cpu3: cpu@3 {
> @@ -56,6 +58,7 @@
> enable-method = "psci";
> next-level-cache = <&l2>;
> operating-points-v2 = <&cpu_opp>;
> + #cooling-cells = <2>;
> };
> };
>
> --
> 2.15.0.194.g9af6a3dea062
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 05/15] arm: dts: uniphier: Add missing cooling device properties for CPUs
@ 2018-06-01 3:25 ` Masahiro Yamada
0 siblings, 0 replies; 107+ messages in thread
From: Masahiro Yamada @ 2018-06-01 3:25 UTC (permalink / raw)
To: linux-arm-kernel
2018-05-25 19:31 GMT+09:00 Viresh Kumar <viresh.kumar@linaro.org>:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied to linux-uniphier.
I had already sent a PR for v4.18-rc1 before I received this patch.
Please wait for v4.19-rc1.
Thanks.
> ---
> arch/arm/boot/dts/uniphier-pxs2.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> index debcbd15c24b..40ed15465095 100644
> --- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
> +++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
> @@ -36,6 +36,7 @@
> enable-method = "psci";
> next-level-cache = <&l2>;
> operating-points-v2 = <&cpu_opp>;
> + #cooling-cells = <2>;
> };
>
> cpu2: cpu at 2 {
> @@ -46,6 +47,7 @@
> enable-method = "psci";
> next-level-cache = <&l2>;
> operating-points-v2 = <&cpu_opp>;
> + #cooling-cells = <2>;
> };
>
> cpu3: cpu at 3 {
> @@ -56,6 +58,7 @@
> enable-method = "psci";
> next-level-cache = <&l2>;
> operating-points-v2 = <&cpu_opp>;
> + #cooling-cells = <2>;
> };
> };
>
> --
> 2.15.0.194.g9af6a3dea062
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards
Masahiro Yamada
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
2018-05-28 10:57 ` Viresh Kumar
@ 2018-06-01 15:17 ` Maxime Ripard
-1 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-06-01 15:17 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Chen-Yu Tsai, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1557 bytes --]
Hi,
On Mon, May 28, 2018 at 04:27:34PM +0530, Viresh Kumar wrote:
> On 28-05-18, 10:44, Maxime Ripard wrote:
> > Hi,
> >
> > On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> > > The cooling device properties, like "#cooling-cells" and
> > > "dynamic-power-coefficient", should either be present for all the CPUs
> > > of a cluster or none. If these are present only for a subset of CPUs of
> > > a cluster then things will start falling apart as soon as the CPUs are
> > > brought online in a different order. For example, this will happen
> > > because the operating system looks for such properties in the CPU node
> > > it is trying to bring up, so that it can register a cooling device.
> > >
> > > Add such missing properties.
> > >
> > > Fix other missing properties (clocks, OPP, clock latency) as well to
> > > make it all work.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > The prefix should be sunxi and not sun, but it looks good to me
> > otherwise.
> >
> > Let me know what your preferred merge method is.
>
> Please pick it up directly and send it as part of your pull request.
> Do you want me to resend or can you fix the $subject ?
I just tried to apply it, and it failed. We have usually two different
PR for the H3 SoCs and the others. Could you split the H3 in a
separate patch (and fix the subject in the process?)
Thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 06/15] arm: dts: sun: Add missing cooling device properties for CPUs
@ 2018-06-01 15:17 ` Maxime Ripard
0 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-06-01 15:17 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, May 28, 2018 at 04:27:34PM +0530, Viresh Kumar wrote:
> On 28-05-18, 10:44, Maxime Ripard wrote:
> > Hi,
> >
> > On Fri, May 25, 2018 at 04:01:52PM +0530, Viresh Kumar wrote:
> > > The cooling device properties, like "#cooling-cells" and
> > > "dynamic-power-coefficient", should either be present for all the CPUs
> > > of a cluster or none. If these are present only for a subset of CPUs of
> > > a cluster then things will start falling apart as soon as the CPUs are
> > > brought online in a different order. For example, this will happen
> > > because the operating system looks for such properties in the CPU node
> > > it is trying to bring up, so that it can register a cooling device.
> > >
> > > Add such missing properties.
> > >
> > > Fix other missing properties (clocks, OPP, clock latency) as well to
> > > make it all work.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > The prefix should be sunxi and not sun, but it looks good to me
> > otherwise.
> >
> > Let me know what your preferred merge method is.
>
> Please pick it up directly and send it as part of your pull request.
> Do you want me to resend or can you fix the $subject ?
I just tried to apply it, and it failed. We have usually two different
PR for the H3 SoCs and the others. Could you split the H3 in a
separate patch (and fix the subject in the process?)
Thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180601/68b1a4e3/attachment.sig>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH V2 13/15] arm: dts: r8a77xx: Add missing OPP properties for CPUs
2018-05-30 4:46 ` [PATCH V2 13/15] arm: dts: r8a77xx: " Viresh Kumar
2018-05-31 14:24 ` Simon Horman
@ 2018-06-04 9:57 ` Simon Horman
2018-06-11 9:26 ` Geert Uytterhoeven
2 siblings, 0 replies; 107+ messages in thread
From: Simon Horman @ 2018-06-04 9:57 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, biju.das, Magnus Damm, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-renesas-soc, devicetree, linux-kernel
On Wed, May 30, 2018 at 10:16:58AM +0530, Viresh Kumar wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like, clock latency, voltage tolerance,
> etc) as well to make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Thanks, I took the liberty of changing the prefix of this patch to
"ARM: dts: r8a77(43|9[013]):" when applying this patch.
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH V2 1/2] arm: dts: sun8i-h3: Add missing cooling device properties for CPUs
2018-06-01 15:17 ` Maxime Ripard
@ 2018-06-05 4:47 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-06-05 4:47 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland, Maxime Ripard, Chen-Yu Tsai
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, clock-names) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
V2: Separated patch for h3.
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 41d57c76f290..9dff6887923c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -84,21 +84,30 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH V2 1/2] arm: dts: sun8i-h3: Add missing cooling device properties for CPUs
@ 2018-06-05 4:47 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-06-05 4:47 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, clock-names) as well to make it all
work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
V2: Separated patch for h3.
arch/arm/boot/dts/sun8i-h3.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 41d57c76f290..9dff6887923c 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -84,21 +84,30 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
2018-06-05 4:47 ` Viresh Kumar
@ 2018-06-05 4:47 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-06-05 4:47 UTC (permalink / raw)
To: arm, Rob Herring, Mark Rutland, Maxime Ripard, Chen-Yu Tsai
Cc: Viresh Kumar, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, devicetree, linux-arm-kernel, linux-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
V2:
- Separated patch for h3
- Fixed subject s/sun/sunxi/
arch/arm/boot/dts/sun6i-a31.dtsi | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++++++++
3 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c72992556a86..debc0bf22ea3 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -119,18 +119,48 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..35372a0cfc8d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -122,6 +122,19 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 8d278ee001e9..4e92741b24a7 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -132,21 +132,30 @@
};
cpu@1 {
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu@3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
@ 2018-06-05 4:47 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-06-05 4:47 UTC (permalink / raw)
To: linux-arm-kernel
The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.
Add such missing properties.
Fix other missing properties (clocks, OPP, clock latency) as well to
make it all work.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
V2:
- Separated patch for h3
- Fixed subject s/sun/sunxi/
arch/arm/boot/dts/sun6i-a31.dtsi | 30 ++++++++++++++++++++++++++++++
arch/arm/boot/dts/sun7i-a20.dtsi | 13 +++++++++++++
arch/arm/boot/dts/sun8i-a33.dtsi | 9 +++++++++
3 files changed, 52 insertions(+)
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c72992556a86..debc0bf22ea3 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -119,18 +119,48 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e529e4ff2174..35372a0cfc8d 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -122,6 +122,19 @@
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <1>;
+ clocks = <&ccu CLK_CPU>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 1000000
+ >;
+ #cooling-cells = <2>;
};
};
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
index 8d278ee001e9..4e92741b24a7 100644
--- a/arch/arm/boot/dts/sun8i-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -132,21 +132,30 @@
};
cpu at 1 {
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 2 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <2>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
cpu at 3 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <3>;
+ clocks = <&ccu CLK_CPUX>;
+ clock-names = "cpu";
operating-points-v2 = <&cpu0_opp_table>;
+ #cooling-cells = <2>;
};
};
--
2.15.0.194.g9af6a3dea062
^ permalink raw reply related [flat|nested] 107+ messages in thread
* Re: [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
2018-06-05 4:47 ` Viresh Kumar
@ 2018-06-05 7:11 ` Maxime Ripard
-1 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-06-05 7:11 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Chen-Yu Tsai, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 905 bytes --]
On Tue, Jun 05, 2018 at 10:17:49AM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied both, thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
@ 2018-06-05 7:11 ` Maxime Ripard
0 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-06-05 7:11 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jun 05, 2018 at 10:17:49AM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied both, thanks!
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180605/15dccabc/attachment.sig>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
2018-06-05 7:11 ` Maxime Ripard
@ 2018-06-05 16:02 ` Chen-Yu Tsai
-1 siblings, 0 replies; 107+ messages in thread
From: Chen-Yu Tsai @ 2018-06-05 16:02 UTC (permalink / raw)
To: Maxime Ripard
Cc: Viresh Kumar, arm-soc, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
devicetree, linux-arm-kernel, linux-kernel
On Tue, Jun 5, 2018 at 3:11 PM, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> On Tue, Jun 05, 2018 at 10:17:49AM +0530, Viresh Kumar wrote:
>> The cooling device properties, like "#cooling-cells" and
>> "dynamic-power-coefficient", should either be present for all the CPUs
>> of a cluster or none. If these are present only for a subset of CPUs of
>> a cluster then things will start falling apart as soon as the CPUs are
>> brought online in a different order. For example, this will happen
>> because the operating system looks for such properties in the CPU node
>> it is trying to bring up, so that it can register a cooling device.
>>
>> Add such missing properties.
>>
>> Fix other missing properties (clocks, OPP, clock latency) as well to
>> make it all work.
>>
>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> Applied both, thanks!
Please fix the "ARM" prefix when applying. :)
ChenYu
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
@ 2018-06-05 16:02 ` Chen-Yu Tsai
0 siblings, 0 replies; 107+ messages in thread
From: Chen-Yu Tsai @ 2018-06-05 16:02 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Jun 5, 2018 at 3:11 PM, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> On Tue, Jun 05, 2018 at 10:17:49AM +0530, Viresh Kumar wrote:
>> The cooling device properties, like "#cooling-cells" and
>> "dynamic-power-coefficient", should either be present for all the CPUs
>> of a cluster or none. If these are present only for a subset of CPUs of
>> a cluster then things will start falling apart as soon as the CPUs are
>> brought online in a different order. For example, this will happen
>> because the operating system looks for such properties in the CPU node
>> it is trying to bring up, so that it can register a cooling device.
>>
>> Add such missing properties.
>>
>> Fix other missing properties (clocks, OPP, clock latency) as well to
>> make it all work.
>>
>> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> Applied both, thanks!
Please fix the "ARM" prefix when applying. :)
ChenYu
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
2018-06-05 16:02 ` Chen-Yu Tsai
@ 2018-06-06 6:58 ` Maxime Ripard
-1 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-06-06 6:58 UTC (permalink / raw)
To: Chen-Yu Tsai
Cc: Viresh Kumar, arm-soc, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
devicetree, linux-arm-kernel, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1193 bytes --]
On Wed, Jun 06, 2018 at 12:02:20AM +0800, Chen-Yu Tsai wrote:
> On Tue, Jun 5, 2018 at 3:11 PM, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > On Tue, Jun 05, 2018 at 10:17:49AM +0530, Viresh Kumar wrote:
> >> The cooling device properties, like "#cooling-cells" and
> >> "dynamic-power-coefficient", should either be present for all the CPUs
> >> of a cluster or none. If these are present only for a subset of CPUs of
> >> a cluster then things will start falling apart as soon as the CPUs are
> >> brought online in a different order. For example, this will happen
> >> because the operating system looks for such properties in the CPU node
> >> it is trying to bring up, so that it can register a cooling device.
> >>
> >> Add such missing properties.
> >>
> >> Fix other missing properties (clocks, OPP, clock latency) as well to
> >> make it all work.
> >>
> >> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > Applied both, thanks!
>
> Please fix the "ARM" prefix when applying. :)
Done, thanks for the reminder :)
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH V2 2/2] arm: dts: sunxi: Add missing cooling device properties for CPUs
@ 2018-06-06 6:58 ` Maxime Ripard
0 siblings, 0 replies; 107+ messages in thread
From: Maxime Ripard @ 2018-06-06 6:58 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jun 06, 2018 at 12:02:20AM +0800, Chen-Yu Tsai wrote:
> On Tue, Jun 5, 2018 at 3:11 PM, Maxime Ripard <maxime.ripard@bootlin.com> wrote:
> > On Tue, Jun 05, 2018 at 10:17:49AM +0530, Viresh Kumar wrote:
> >> The cooling device properties, like "#cooling-cells" and
> >> "dynamic-power-coefficient", should either be present for all the CPUs
> >> of a cluster or none. If these are present only for a subset of CPUs of
> >> a cluster then things will start falling apart as soon as the CPUs are
> >> brought online in a different order. For example, this will happen
> >> because the operating system looks for such properties in the CPU node
> >> it is trying to bring up, so that it can register a cooling device.
> >>
> >> Add such missing properties.
> >>
> >> Fix other missing properties (clocks, OPP, clock latency) as well to
> >> make it all work.
> >>
> >> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> >
> > Applied both, thanks!
>
> Please fix the "ARM" prefix when applying. :)
Done, thanks for the reminder :)
Maxime
--
Maxime Ripard, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180606/7503a1f4/attachment-0001.sig>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH V2 13/15] arm: dts: r8a77xx: Add missing OPP properties for CPUs
2018-05-30 4:46 ` [PATCH V2 13/15] arm: dts: r8a77xx: " Viresh Kumar
2018-05-31 14:24 ` Simon Horman
2018-06-04 9:57 ` Simon Horman
@ 2018-06-11 9:26 ` Geert Uytterhoeven
2 siblings, 0 replies; 107+ messages in thread
From: Geert Uytterhoeven @ 2018-06-11 9:26 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Biju Das, Simon Horman, Magnus Damm, Rob Herring,
Mark Rutland, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath, Linux-Renesas,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
Linux Kernel Mailing List
On Wed, May 30, 2018 at 6:47 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like, clock latency, voltage tolerance,
> etc) as well to make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 04/15] arm: dts: rk322x: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-06-17 14:47 ` Heiko Stuebner
-1 siblings, 0 replies; 107+ messages in thread
From: Heiko Stuebner @ 2018-06-17 14:47 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Vincent Guittot, ionela.voinescu,
Daniel Lezcano, chris.redpath, linux-arm-kernel, linux-rockchip,
devicetree, linux-kernel
Am Freitag, 25. Mai 2018, 12:31:50 CEST schrieb Viresh Kumar:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
applied for 4.19
Thanks
Heiko
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 04/15] arm: dts: rk322x: Add missing cooling device properties for CPUs
@ 2018-06-17 14:47 ` Heiko Stuebner
0 siblings, 0 replies; 107+ messages in thread
From: Heiko Stuebner @ 2018-06-17 14:47 UTC (permalink / raw)
To: linux-arm-kernel
Am Freitag, 25. Mai 2018, 12:31:50 CEST schrieb Viresh Kumar:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
applied for 4.19
Thanks
Heiko
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 10/15] arm: dts: rk3288: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-06-17 14:47 ` Heiko Stuebner
-1 siblings, 0 replies; 107+ messages in thread
From: Heiko Stuebner @ 2018-06-17 14:47 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Vincent Guittot, ionela.voinescu,
Daniel Lezcano, chris.redpath, linux-arm-kernel, linux-rockchip,
devicetree, linux-kernel
Am Freitag, 25. Mai 2018, 12:31:56 CEST schrieb Viresh Kumar:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
applied for 4.19, after adapting the patch to the opp-v2 conversion
I Cc'ed you on [for your reference].
Thanks
Heiko
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 10/15] arm: dts: rk3288: Add missing cooling device properties for CPUs
@ 2018-06-17 14:47 ` Heiko Stuebner
0 siblings, 0 replies; 107+ messages in thread
From: Heiko Stuebner @ 2018-06-17 14:47 UTC (permalink / raw)
To: linux-arm-kernel
Am Freitag, 25. Mai 2018, 12:31:56 CEST schrieb Viresh Kumar:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
applied for 4.19, after adapting the patch to the opp-v2 conversion
I Cc'ed you on [for your reference].
Thanks
Heiko
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-06-20 18:44 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 107+ messages in thread
From: Krzysztof Kozlowski @ 2018-06-20 18:44 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Kukjin Kim, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath, devicetree,
linux-arm-kernel, linux-samsung-soc, linux-kernel
On Fri, May 25, 2018 at 04:01:53PM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 13 +++++++++++++
> arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
> arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++++++++++++++++++
> 4 files changed, 61 insertions(+)
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 07/15] arm: dts: exynos: Add missing cooling device properties for CPUs
@ 2018-06-20 18:44 ` Krzysztof Kozlowski
0 siblings, 0 replies; 107+ messages in thread
From: Krzysztof Kozlowski @ 2018-06-20 18:44 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 25, 2018 at 04:01:53PM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, OPP, clock latency) as well to
> make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/exynos3250.dtsi | 16 ++++++++++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 13 +++++++++++++
> arch/arm/boot/dts/exynos4412.dtsi | 9 +++++++++
> arch/arm/boot/dts/exynos5250.dtsi | 23 +++++++++++++++++++++++
> 4 files changed, 61 insertions(+)
>
Thanks, applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 03/15] arm: dts: mediatek: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
@ 2018-06-25 14:58 ` Matthias Brugger
-1 siblings, 0 replies; 107+ messages in thread
From: Matthias Brugger @ 2018-06-25 14:58 UTC (permalink / raw)
To: Viresh Kumar, arm, Rob Herring, Mark Rutland
Cc: Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-arm-kernel, linux-mediatek, devicetree, linux-kernel
On 25/05/18 12:31, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
pushed to v4.18-next/dts32
Thanks
> ---
> arch/arm/boot/dts/mt7623.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index d1eb123bc73b..1cdc346a05e8 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -92,6 +92,7 @@
> <&apmixedsys CLK_APMIXED_MAINPLL>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> clock-frequency = <1300000000>;
> };
>
> @@ -103,6 +104,7 @@
> <&apmixedsys CLK_APMIXED_MAINPLL>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> clock-frequency = <1300000000>;
> };
>
> @@ -114,6 +116,7 @@
> <&apmixedsys CLK_APMIXED_MAINPLL>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> clock-frequency = <1300000000>;
> };
> };
>
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 03/15] arm: dts: mediatek: Add missing cooling device properties for CPUs
@ 2018-06-25 14:58 ` Matthias Brugger
0 siblings, 0 replies; 107+ messages in thread
From: Matthias Brugger @ 2018-06-25 14:58 UTC (permalink / raw)
To: linux-arm-kernel
On 25/05/18 12:31, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
pushed to v4.18-next/dts32
Thanks
> ---
> arch/arm/boot/dts/mt7623.dtsi | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
> index d1eb123bc73b..1cdc346a05e8 100644
> --- a/arch/arm/boot/dts/mt7623.dtsi
> +++ b/arch/arm/boot/dts/mt7623.dtsi
> @@ -92,6 +92,7 @@
> <&apmixedsys CLK_APMIXED_MAINPLL>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> clock-frequency = <1300000000>;
> };
>
> @@ -103,6 +104,7 @@
> <&apmixedsys CLK_APMIXED_MAINPLL>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> clock-frequency = <1300000000>;
> };
>
> @@ -114,6 +116,7 @@
> <&apmixedsys CLK_APMIXED_MAINPLL>;
> clock-names = "cpu", "intermediate";
> operating-points-v2 = <&cpu_opp_table>;
> + #cooling-cells = <2>;
> clock-frequency = <1300000000>;
> };
> };
>
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
2018-05-25 10:31 ` Viresh Kumar
(?)
@ 2018-07-02 20:25 ` Rob Herring
-1 siblings, 0 replies; 107+ messages in thread
From: Rob Herring @ 2018-07-02 20:25 UTC (permalink / raw)
To: Viresh Kumar, ARM-SoC Maintainers
Cc: Mark Rutland, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-kernel
On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
Acked-by: Rob Herring <robh@kernel.org>
ARM-SOC maintainers, Please apply this.
Rob
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-02 20:25 ` Rob Herring
0 siblings, 0 replies; 107+ messages in thread
From: Rob Herring @ 2018-07-02 20:25 UTC (permalink / raw)
To: Viresh Kumar, ARM-SoC Maintainers
Cc: Mark Rutland, Vincent Guittot, ionela.voinescu, Daniel Lezcano,
chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-kernel
On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
Acked-by: Rob Herring <robh@kernel.org>
ARM-SOC maintainers, Please apply this.
Rob
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-02 20:25 ` Rob Herring
0 siblings, 0 replies; 107+ messages in thread
From: Rob Herring @ 2018-07-02 20:25 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> 1 file changed, 30 insertions(+)
Acked-by: Rob Herring <robh@kernel.org>
ARM-SOC maintainers, Please apply this.
Rob
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
2018-07-02 20:25 ` Rob Herring
(?)
@ 2018-07-02 23:27 ` Olof Johansson
-1 siblings, 0 replies; 107+ messages in thread
From: Olof Johansson @ 2018-07-02 23:27 UTC (permalink / raw)
To: Rob Herring
Cc: Viresh Kumar, ARM-SoC Maintainers, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-kernel
On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
> On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster then things will start falling apart as soon
> > as the CPUs are brought online in a different order. For example, this
> > will happen because the operating system looks for such properties in
> > the CPU node it is trying to bring up, so that it can create an OPP
> > table.
> >
> > Add such missing properties.
> >
> > Fix other missing property (clock latency) as well to make it all
> > work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ARM-SOC maintainers, Please apply this.
Applied to next/dt.
-Olof
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-02 23:27 ` Olof Johansson
0 siblings, 0 replies; 107+ messages in thread
From: Olof Johansson @ 2018-07-02 23:27 UTC (permalink / raw)
To: Rob Herring
Cc: Viresh Kumar, ARM-SoC Maintainers, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-kernel
On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
> On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster then things will start falling apart as soon
> > as the CPUs are brought online in a different order. For example, this
> > will happen because the operating system looks for such properties in
> > the CPU node it is trying to bring up, so that it can create an OPP
> > table.
> >
> > Add such missing properties.
> >
> > Fix other missing property (clock latency) as well to make it all
> > work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ARM-SOC maintainers, Please apply this.
Applied to next/dt.
-Olof
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-02 23:27 ` Olof Johansson
0 siblings, 0 replies; 107+ messages in thread
From: Olof Johansson @ 2018-07-02 23:27 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
> On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> >
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster then things will start falling apart as soon
> > as the CPUs are brought online in a different order. For example, this
> > will happen because the operating system looks for such properties in
> > the CPU node it is trying to bring up, so that it can create an OPP
> > table.
> >
> > Add such missing properties.
> >
> > Fix other missing property (clock latency) as well to make it all
> > work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > ---
> > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> > 1 file changed, 30 insertions(+)
>
> Acked-by: Rob Herring <robh@kernel.org>
>
> ARM-SOC maintainers, Please apply this.
Applied to next/dt.
-Olof
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 02/15] arm: dts: ls1021a: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` [PATCH 02/15] arm: dts: ls1021a: Add missing cooling device properties for CPUs Viresh Kumar
@ 2018-07-03 1:35 ` Shawn Guo
0 siblings, 0 replies; 107+ messages in thread
From: Shawn Guo @ 2018-07-03 1:35 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Rob Herring, Mark Rutland, Vincent Guittot, ionela.voinescu,
Daniel Lezcano, chris.redpath, devicetree, linux-kernel
On Fri, May 25, 2018 at 04:01:48PM +0530, Viresh Kumar wrote:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied, thanks.
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
2018-07-02 23:27 ` Olof Johansson
(?)
@ 2018-07-03 4:13 ` Viresh Kumar
-1 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-07-03 4:13 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, ARM-SoC Maintainers, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-kernel
On 02-07-18, 16:27, Olof Johansson wrote:
> On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
> > On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > The OPP properties, like "operating-points", should either be present
> > > for all the CPUs of a cluster or none. If these are present only for a
> > > subset of CPUs of a cluster then things will start falling apart as soon
> > > as the CPUs are brought online in a different order. For example, this
> > > will happen because the operating system looks for such properties in
> > > the CPU node it is trying to bring up, so that it can create an OPP
> > > table.
> > >
> > > Add such missing properties.
> > >
> > > Fix other missing property (clock latency) as well to make it all
> > > work.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> > > 1 file changed, 30 insertions(+)
> >
> > Acked-by: Rob Herring <robh@kernel.org>
> >
> > ARM-SOC maintainers, Please apply this.
>
> Applied to next/dt.
Thanks Olof.
Can you also apply other patches in this series, that haven't been
applied yet by SoC maintainers ? And same for the arm64 series..
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-03 4:13 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-07-03 4:13 UTC (permalink / raw)
To: Olof Johansson
Cc: Rob Herring, ARM-SoC Maintainers, Mark Rutland, Vincent Guittot,
ionela.voinescu, Daniel Lezcano, chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
devicetree, linux-kernel
On 02-07-18, 16:27, Olof Johansson wrote:
> On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
> > On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > The OPP properties, like "operating-points", should either be present
> > > for all the CPUs of a cluster or none. If these are present only for a
> > > subset of CPUs of a cluster then things will start falling apart as soon
> > > as the CPUs are brought online in a different order. For example, this
> > > will happen because the operating system looks for such properties in
> > > the CPU node it is trying to bring up, so that it can create an OPP
> > > table.
> > >
> > > Add such missing properties.
> > >
> > > Fix other missing property (clock latency) as well to make it all
> > > work.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> > > 1 file changed, 30 insertions(+)
> >
> > Acked-by: Rob Herring <robh@kernel.org>
> >
> > ARM-SOC maintainers, Please apply this.
>
> Applied to next/dt.
Thanks Olof.
Can you also apply other patches in this series, that haven't been
applied yet by SoC maintainers ? And same for the arm64 series..
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-03 4:13 ` Viresh Kumar
0 siblings, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-07-03 4:13 UTC (permalink / raw)
To: linux-arm-kernel
On 02-07-18, 16:27, Olof Johansson wrote:
> On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
> > On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > >
> > > The OPP properties, like "operating-points", should either be present
> > > for all the CPUs of a cluster or none. If these are present only for a
> > > subset of CPUs of a cluster then things will start falling apart as soon
> > > as the CPUs are brought online in a different order. For example, this
> > > will happen because the operating system looks for such properties in
> > > the CPU node it is trying to bring up, so that it can create an OPP
> > > table.
> > >
> > > Add such missing properties.
> > >
> > > Fix other missing property (clock latency) as well to make it all
> > > work.
> > >
> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> > > ---
> > > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
> > > 1 file changed, 30 insertions(+)
> >
> > Acked-by: Rob Herring <robh@kernel.org>
> >
> > ARM-SOC maintainers, Please apply this.
>
> Applied to next/dt.
Thanks Olof.
Can you also apply other patches in this series, that haven't been
applied yet by SoC maintainers ? And same for the arm64 series..
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 08/15] arm: dts: dra74x: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` [PATCH 08/15] arm: dts: dra74x: " Viresh Kumar
@ 2018-07-03 6:43 ` Tony Lindgren
0 siblings, 0 replies; 107+ messages in thread
From: Tony Lindgren @ 2018-07-03 6:43 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Benoît Cousson, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-omap, devicetree, linux-kernel
* Viresh Kumar <viresh.kumar@linaro.org> [180525 03:35]:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, supply, clock latency) as well to
> make it all work.
Applying this one into omap-for-v4.19/dt thanks.
Regards,
Tony
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 09/15] arm: dts: omap: Add missing cooling device properties for CPUs
2018-05-25 10:31 ` [PATCH 09/15] arm: dts: omap: " Viresh Kumar
@ 2018-07-03 6:44 ` Tony Lindgren
0 siblings, 0 replies; 107+ messages in thread
From: Tony Lindgren @ 2018-07-03 6:44 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Benoît Cousson, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-omap, devicetree, linux-kernel
* Viresh Kumar <viresh.kumar@linaro.org> [180525 03:35]:
> The cooling device properties, like "#cooling-cells" and
> "dynamic-power-coefficient", should either be present for all the CPUs
> of a cluster or none. If these are present only for a subset of CPUs of
> a cluster then things will start falling apart as soon as the CPUs are
> brought online in a different order. For example, this will happen
> because the operating system looks for such properties in the CPU node
> it is trying to bring up, so that it can register a cooling device.
>
> Add such missing properties.
>
> Fix other missing properties (clocks, supply, clock latency) as well to
> make it all work.
Applying this too into omap-for-v4.19/dt thanks.
Tony
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
2018-05-28 11:07 ` Viresh Kumar
@ 2018-07-03 7:12 ` Shawn Guo
-1 siblings, 0 replies; 107+ messages in thread
From: Shawn Guo @ 2018-07-03 7:12 UTC (permalink / raw)
To: Viresh Kumar
Cc: Lucas Stach, arm, Sascha Hauer, Pengutronix Kernel Team,
Fabio Estevam, Rob Herring, Mark Rutland, devicetree,
Vincent Guittot, Daniel Lezcano, linux-kernel, chris.redpath,
ionela.voinescu, linux-arm-kernel
On Mon, May 28, 2018 at 04:37:39PM +0530, Viresh Kumar wrote:
> Hi Lucas,
>
> On 25-05-18, 13:46, Lucas Stach wrote:
> > This is a lot of duplicate information for what is effectively a shared
> > cluster wide thing. This does absolutely not _feel_ right.
>
> I cannot agree more :)
>
> > What problem are you solving here? Why do we need all this duplicate
> > information? Why can't we fix it by falling back to looking at cpu0 if
> > needed?
>
> Let me try explaining one of the problem scenarios to you as your
> platform is a single cluster one. Make cpufreq driver as module, don't
> insert it, hotplug out CPU0 and now insert the cpufreq driver. The
> cpufreq core will try adding the cpufreq policy for CPU1 but wouldn't
> find the required information in the DT node of CPU1 and so will fail
> or behave incorrectly.
>
> We can't look at CPU0 as we don't know they are related at all.
> Nothing tells that to us. The right solution to fix the duplication is
> to move to OPP-v2 bindings, which allow us to create a single OPP
> table node and refer to it from all the CPU nodes. Because in case of
> imx platforms getting updated here, we use the old and some platforms
> specific frequency tables, we have to duplicate it everywhere.
>
> But looking from DT otherwise, all the device should anyway have all
> the information required right in their node. That can be simplified
> with things like phandle to opp-v2 node, but still everything needs to
> be there. We shouldn't really rely on other CPU nodes to make it work.
> That would be an incomplete definition of the hardware IMHO.
Lucas,
Are you fine with the patch now considering the respond from Viresh?
Shawn
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
@ 2018-07-03 7:12 ` Shawn Guo
0 siblings, 0 replies; 107+ messages in thread
From: Shawn Guo @ 2018-07-03 7:12 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, May 28, 2018 at 04:37:39PM +0530, Viresh Kumar wrote:
> Hi Lucas,
>
> On 25-05-18, 13:46, Lucas Stach wrote:
> > This is a lot of duplicate information for what is effectively a shared
> > cluster wide thing. This does absolutely not _feel_ right.
>
> I cannot agree more :)
>
> > What problem are you solving here? Why do we need all this duplicate
> > information? Why can't we fix it by falling back to looking at cpu0 if
> > needed?
>
> Let me try explaining one of the problem scenarios to you as your
> platform is a single cluster one. Make cpufreq driver as module, don't
> insert it, hotplug out CPU0 and now insert the cpufreq driver. The
> cpufreq core will try adding the cpufreq policy for CPU1 but wouldn't
> find the required information in the DT node of CPU1 and so will fail
> or behave incorrectly.
>
> We can't look at CPU0 as we don't know they are related at all.
> Nothing tells that to us. The right solution to fix the duplication is
> to move to OPP-v2 bindings, which allow us to create a single OPP
> table node and refer to it from all the CPU nodes. Because in case of
> imx platforms getting updated here, we use the old and some platforms
> specific frequency tables, we have to duplicate it everywhere.
>
> But looking from DT otherwise, all the device should anyway have all
> the information required right in their node. That can be simplified
> with things like phandle to opp-v2 node, but still everything needs to
> be there. We shouldn't really rely on other CPU nodes to make it work.
> That would be an incomplete definition of the hardware IMHO.
Lucas,
Are you fine with the patch now considering the respond from Viresh?
Shawn
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
2018-07-03 7:12 ` Shawn Guo
@ 2018-07-03 8:56 ` Lucas Stach
-1 siblings, 0 replies; 107+ messages in thread
From: Lucas Stach @ 2018-07-03 8:56 UTC (permalink / raw)
To: Shawn Guo, Viresh Kumar
Cc: arm, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Rob Herring, Mark Rutland, devicetree, Vincent Guittot,
Daniel Lezcano, linux-kernel, chris.redpath, ionela.voinescu,
linux-arm-kernel
Hi Shawn,
Am Dienstag, den 03.07.2018, 15:12 +0800 schrieb Shawn Guo:
> On Mon, May 28, 2018 at 04:37:39PM +0530, Viresh Kumar wrote:
> > Hi Lucas,
> >
> > On 25-05-18, 13:46, Lucas Stach wrote:
> > > This is a lot of duplicate information for what is effectively a shared
> > > cluster wide thing. This does absolutely not _feel_ right.
> >
> > I cannot agree more :)
> >
> > > What problem are you solving here? Why do we need all this duplicate
> > > information? Why can't we fix it by falling back to looking at cpu0 if
> > > needed?
> >
> > Let me try explaining one of the problem scenarios to you as your
> > platform is a single cluster one. Make cpufreq driver as module, don't
> > insert it, hotplug out CPU0 and now insert the cpufreq driver. The
> > cpufreq core will try adding the cpufreq policy for CPU1 but wouldn't
> > find the required information in the DT node of CPU1 and so will fail
> > or behave incorrectly.
> >
> > We can't look at CPU0 as we don't know they are related at all.
> > Nothing tells that to us. The right solution to fix the duplication is
> > to move to OPP-v2 bindings, which allow us to create a single OPP
> > table node and refer to it from all the CPU nodes. Because in case of
> > imx platforms getting updated here, we use the old and some platforms
> > specific frequency tables, we have to duplicate it everywhere.
> >
> > But looking from DT otherwise, all the device should anyway have all
> > the information required right in their node. That can be simplified
> > with things like phandle to opp-v2 node, but still everything needs to
> > be there. We shouldn't really rely on other CPU nodes to make it work.
> > That would be an incomplete definition of the hardware IMHO.
>
> Lucas,
>
> Are you fine with the patch now considering the respond from Viresh?
I still don't like the huge duplication of information in the DT, but I
agree that it's currently necessary for correctness. Long term I hope
we can get away from cpufreq-imx6 and the custom SoC OPPs, which would
allow us to switch over to OPPv2.
So patch is:
Reluctantly-acked-by: Lucas Stach <l.stach@pengutronix.de>
Regards,
Lucas
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
@ 2018-07-03 8:56 ` Lucas Stach
0 siblings, 0 replies; 107+ messages in thread
From: Lucas Stach @ 2018-07-03 8:56 UTC (permalink / raw)
To: linux-arm-kernel
Hi Shawn,
Am Dienstag, den 03.07.2018, 15:12 +0800 schrieb Shawn Guo:
> On Mon, May 28, 2018 at 04:37:39PM +0530, Viresh Kumar wrote:
> > Hi Lucas,
> >
> > On 25-05-18, 13:46, Lucas Stach wrote:
> > > This is a lot of duplicate information for what is effectively a shared
> > > ?cluster wide thing. This does absolutely not _feel_ right.
> >
> > I cannot agree more :)
> >
> > > What problem are you solving here? Why do we need all this duplicate
> > > information? Why can't we fix it by falling back to looking at cpu0 if
> > > needed?
> >
> > Let me try explaining one of the problem scenarios to you as your
> > platform is a single cluster one. Make cpufreq driver as module, don't
> > insert it, hotplug out CPU0 and now insert the cpufreq driver. The
> > cpufreq core will try adding the cpufreq policy for CPU1 but wouldn't
> > find the required information in the DT node of CPU1 and so will fail
> > or behave incorrectly.
> >
> > We can't look at CPU0 as we don't know they are related at all.
> > Nothing tells that to us. The right solution to fix the duplication is
> > to move to OPP-v2 bindings, which allow us to create a single OPP
> > table node and refer to it from all the CPU nodes. Because in case of
> > imx platforms getting updated here, we use the old and some platforms
> > specific frequency tables, we have to duplicate it everywhere.
> >
> > But looking from DT otherwise, all the device should anyway have all
> > the information required right in their node. That can be simplified
> > with things like phandle to opp-v2 node, but still everything needs to
> > be there. We shouldn't really rely on other CPU nodes to make it work.
> > That would be an incomplete definition of the hardware IMHO.
>
> Lucas,
>
> Are you fine with the patch now considering the respond from Viresh?
I still don't like the huge duplication of information in the DT, but I
agree that it's currently necessary for correctness. Long term I hope
we can get away from cpufreq-imx6 and the custom SoC OPPs, which would
allow us to switch over to OPPv2.
So patch is:
Reluctantly-acked-by: Lucas Stach <l.stach@pengutronix.de>
Regards,
Lucas
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
2018-05-25 10:32 ` Viresh Kumar
@ 2018-07-03 12:34 ` Shawn Guo
-1 siblings, 0 replies; 107+ messages in thread
From: Shawn Guo @ 2018-07-03 12:34 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
Rob Herring, Mark Rutland, Vincent Guittot, ionela.voinescu,
Daniel Lezcano, chris.redpath, linux-arm-kernel, devicetree,
linux-kernel
On Fri, May 25, 2018 at 04:02:01PM +0530, Viresh Kumar wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like clocks, supply, clock latency) as
> well to make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied, thanks.
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 15/15] arm: dts: imx: Add missing OPP properties for CPUs
@ 2018-07-03 12:34 ` Shawn Guo
0 siblings, 0 replies; 107+ messages in thread
From: Shawn Guo @ 2018-07-03 12:34 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, May 25, 2018 at 04:02:01PM +0530, Viresh Kumar wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing properties (like clocks, supply, clock latency) as
> well to make it all work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Applied, thanks.
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
2018-07-03 4:13 ` Viresh Kumar
(?)
@ 2018-07-03 14:46 ` Olof Johansson
-1 siblings, 0 replies; 107+ messages in thread
From: Olof Johansson @ 2018-07-03 14:46 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rob Herring, ARM-SoC Maintainers, Mark Rutland, Vincent Guittot,
Ionela Voinescu, Daniel Lezcano, chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, DTML,
linux-kernel
On Mon, Jul 2, 2018 at 9:13 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 02-07-18, 16:27, Olof Johansson wrote:
>> On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
>> > On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> > >
>> > > The OPP properties, like "operating-points", should either be present
>> > > for all the CPUs of a cluster or none. If these are present only for a
>> > > subset of CPUs of a cluster then things will start falling apart as soon
>> > > as the CPUs are brought online in a different order. For example, this
>> > > will happen because the operating system looks for such properties in
>> > > the CPU node it is trying to bring up, so that it can create an OPP
>> > > table.
>> > >
>> > > Add such missing properties.
>> > >
>> > > Fix other missing property (clock latency) as well to make it all
>> > > work.
>> > >
>> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> > > ---
>> > > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
>> > > 1 file changed, 30 insertions(+)
>> >
>> > Acked-by: Rob Herring <robh@kernel.org>
>> >
>> > ARM-SOC maintainers, Please apply this.
>>
>> Applied to next/dt.
>
> Thanks Olof.
>
> Can you also apply other patches in this series, that haven't been
> applied yet by SoC maintainers ? And same for the arm64 series..
This is the kind of patch that should be applied by the maintainers
for active platforms, where they have systems to test with and can
make sure you haven't regressed something on them.
For very low patch rate platforms we can apply directly through
maintainer acks, like in this case.
So, my recommendation is to repost the series to the maintainers.
Please don't patchbomb arm@kernel.org though, so keep us off of cc by
default (you can add our individual addresses if you want).
Thanks,
-Olof
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-03 14:46 ` Olof Johansson
0 siblings, 0 replies; 107+ messages in thread
From: Olof Johansson @ 2018-07-03 14:46 UTC (permalink / raw)
To: Viresh Kumar
Cc: Rob Herring, ARM-SoC Maintainers, Mark Rutland, Vincent Guittot,
Ionela Voinescu, Daniel Lezcano, chris.redpath,
moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE, DTML,
linux-kernel
On Mon, Jul 2, 2018 at 9:13 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 02-07-18, 16:27, Olof Johansson wrote:
>> On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
>> > On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> > >
>> > > The OPP properties, like "operating-points", should either be present
>> > > for all the CPUs of a cluster or none. If these are present only for a
>> > > subset of CPUs of a cluster then things will start falling apart as soon
>> > > as the CPUs are brought online in a different order. For example, this
>> > > will happen because the operating system looks for such properties in
>> > > the CPU node it is trying to bring up, so that it can create an OPP
>> > > table.
>> > >
>> > > Add such missing properties.
>> > >
>> > > Fix other missing property (clock latency) as well to make it all
>> > > work.
>> > >
>> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> > > ---
>> > > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
>> > > 1 file changed, 30 insertions(+)
>> >
>> > Acked-by: Rob Herring <robh@kernel.org>
>> >
>> > ARM-SOC maintainers, Please apply this.
>>
>> Applied to next/dt.
>
> Thanks Olof.
>
> Can you also apply other patches in this series, that haven't been
> applied yet by SoC maintainers ? And same for the arm64 series..
This is the kind of patch that should be applied by the maintainers
for active platforms, where they have systems to test with and can
make sure you haven't regressed something on them.
For very low patch rate platforms we can apply directly through
maintainer acks, like in this case.
So, my recommendation is to repost the series to the maintainers.
Please don't patchbomb arm@kernel.org though, so keep us off of cc by
default (you can add our individual addresses if you want).
Thanks,
-Olof
^ permalink raw reply [flat|nested] 107+ messages in thread
* [PATCH 12/15] arm: dts: highbank: Add missing OPP properties for CPUs
@ 2018-07-03 14:46 ` Olof Johansson
0 siblings, 0 replies; 107+ messages in thread
From: Olof Johansson @ 2018-07-03 14:46 UTC (permalink / raw)
To: linux-arm-kernel
On Mon, Jul 2, 2018 at 9:13 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> On 02-07-18, 16:27, Olof Johansson wrote:
>> On Mon, Jul 02, 2018 at 02:25:40PM -0600, Rob Herring wrote:
>> > On Fri, May 25, 2018 at 4:32 AM Viresh Kumar <viresh.kumar@linaro.org> wrote:
>> > >
>> > > The OPP properties, like "operating-points", should either be present
>> > > for all the CPUs of a cluster or none. If these are present only for a
>> > > subset of CPUs of a cluster then things will start falling apart as soon
>> > > as the CPUs are brought online in a different order. For example, this
>> > > will happen because the operating system looks for such properties in
>> > > the CPU node it is trying to bring up, so that it can create an OPP
>> > > table.
>> > >
>> > > Add such missing properties.
>> > >
>> > > Fix other missing property (clock latency) as well to make it all
>> > > work.
>> > >
>> > > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>> > > ---
>> > > arch/arm/boot/dts/highbank.dts | 30 ++++++++++++++++++++++++++++++
>> > > 1 file changed, 30 insertions(+)
>> >
>> > Acked-by: Rob Herring <robh@kernel.org>
>> >
>> > ARM-SOC maintainers, Please apply this.
>>
>> Applied to next/dt.
>
> Thanks Olof.
>
> Can you also apply other patches in this series, that haven't been
> applied yet by SoC maintainers ? And same for the arm64 series..
This is the kind of patch that should be applied by the maintainers
for active platforms, where they have systems to test with and can
make sure you haven't regressed something on them.
For very low patch rate platforms we can apply directly through
maintainer acks, like in this case.
So, my recommendation is to repost the series to the maintainers.
Please don't patchbomb arm at kernel.org though, so keep us off of cc by
default (you can add our individual addresses if you want).
Thanks,
-Olof
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
2018-05-25 10:32 ` [PATCH 14/15] arm: dts: qcom: " Viresh Kumar
@ 2018-07-18 6:08 ` Viresh Kumar
2018-07-18 10:22 ` Amit Kucheria
1 sibling, 0 replies; 107+ messages in thread
From: Viresh Kumar @ 2018-07-18 6:08 UTC (permalink / raw)
To: arm, Andy Gross, David Brown, Rob Herring, Mark Rutland
Cc: Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-arm-msm, linux-soc, devicetree, linux-kernel
On 25-05-18, 16:02, Viresh Kumar wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
> ---
> arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
Qcom maintainers, can you please apply this one ?
--
viresh
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
2018-05-25 10:32 ` [PATCH 14/15] arm: dts: qcom: " Viresh Kumar
@ 2018-07-18 10:22 ` Amit Kucheria
2018-07-18 10:22 ` Amit Kucheria
1 sibling, 0 replies; 107+ messages in thread
From: Amit Kucheria @ 2018-07-18 10:22 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Andy Gross, David Brown, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-arm-msm, open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML
On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
FWIW,
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index b25daf368012..8c202b359270 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -75,6 +75,14 @@
> reg = <0x1>;
> clocks = <&gcc GCC_APPS_CLK_SRC>;
> clock-frequency = <0>;
> + operating-points = <
> + /* kHz uV (fixed) */
> + 48000 1100000
> + 200000 1100000
> + 500000 1100000
> + 666000 1100000
> + >;
> + clock-latency = <256000>;
> };
>
> cpu@2 {
> @@ -86,6 +94,14 @@
> reg = <0x2>;
> clocks = <&gcc GCC_APPS_CLK_SRC>;
> clock-frequency = <0>;
> + operating-points = <
> + /* kHz uV (fixed) */
> + 48000 1100000
> + 200000 1100000
> + 500000 1100000
> + 666000 1100000
> + >;
> + clock-latency = <256000>;
> };
>
> cpu@3 {
> @@ -97,6 +113,14 @@
> reg = <0x3>;
> clocks = <&gcc GCC_APPS_CLK_SRC>;
> clock-frequency = <0>;
> + operating-points = <
> + /* kHz uV (fixed) */
> + 48000 1100000
> + 200000 1100000
> + 500000 1100000
> + 666000 1100000
> + >;
> + clock-latency = <256000>;
> };
> };
>
> --
> 2.15.0.194.g9af6a3dea062
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
@ 2018-07-18 10:22 ` Amit Kucheria
0 siblings, 0 replies; 107+ messages in thread
From: Amit Kucheria @ 2018-07-18 10:22 UTC (permalink / raw)
To: Viresh Kumar
Cc: arm, Andy Gross, David Brown, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-arm-msm, open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML
On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> The OPP properties, like "operating-points", should either be present
> for all the CPUs of a cluster or none. If these are present only for a
> subset of CPUs of a cluster then things will start falling apart as soon
> as the CPUs are brought online in a different order. For example, this
> will happen because the operating system looks for such properties in
> the CPU node it is trying to bring up, so that it can create an OPP
> table.
>
> Add such missing properties.
>
> Fix other missing property (clock latency) as well to make it all
> work.
>
> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
FWIW,
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> arch/arm/boot/dts/qcom-ipq4019.dtsi | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> index b25daf368012..8c202b359270 100644
> --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
> @@ -75,6 +75,14 @@
> reg = <0x1>;
> clocks = <&gcc GCC_APPS_CLK_SRC>;
> clock-frequency = <0>;
> + operating-points = <
> + /* kHz uV (fixed) */
> + 48000 1100000
> + 200000 1100000
> + 500000 1100000
> + 666000 1100000
> + >;
> + clock-latency = <256000>;
> };
>
> cpu@2 {
> @@ -86,6 +94,14 @@
> reg = <0x2>;
> clocks = <&gcc GCC_APPS_CLK_SRC>;
> clock-frequency = <0>;
> + operating-points = <
> + /* kHz uV (fixed) */
> + 48000 1100000
> + 200000 1100000
> + 500000 1100000
> + 666000 1100000
> + >;
> + clock-latency = <256000>;
> };
>
> cpu@3 {
> @@ -97,6 +113,14 @@
> reg = <0x3>;
> clocks = <&gcc GCC_APPS_CLK_SRC>;
> clock-frequency = <0>;
> + operating-points = <
> + /* kHz uV (fixed) */
> + 48000 1100000
> + 200000 1100000
> + 500000 1100000
> + 666000 1100000
> + >;
> + clock-latency = <256000>;
> };
> };
>
> --
> 2.15.0.194.g9af6a3dea062
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
2018-07-18 10:22 ` Amit Kucheria
@ 2018-07-21 18:56 ` Andy Gross
-1 siblings, 0 replies; 107+ messages in thread
From: Andy Gross @ 2018-07-21 18:56 UTC (permalink / raw)
To: Amit Kucheria
Cc: Viresh Kumar, arm, David Brown, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-arm-msm, open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML
On Wed, Jul 18, 2018 at 03:52:26PM +0530, Amit Kucheria wrote:
> On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster then things will start falling apart as soon
> > as the CPUs are brought online in a different order. For example, this
> > will happen because the operating system looks for such properties in
> > the CPU node it is trying to bring up, so that it can create an OPP
> > table.
> >
> > Add such missing properties.
> >
> > Fix other missing property (clock latency) as well to make it all
> > work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> FWIW,
> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Picking this up for 4.19. thanks.
Andy
^ permalink raw reply [flat|nested] 107+ messages in thread
* Re: [PATCH 14/15] arm: dts: qcom: Add missing OPP properties for CPUs
@ 2018-07-21 18:56 ` Andy Gross
0 siblings, 0 replies; 107+ messages in thread
From: Andy Gross @ 2018-07-21 18:56 UTC (permalink / raw)
To: Amit Kucheria
Cc: Viresh Kumar, arm, David Brown, Rob Herring, Mark Rutland,
Vincent Guittot, ionela.voinescu, Daniel Lezcano, chris.redpath,
linux-arm-msm, open list:ARM/QUALCOMM SUPPORT,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, LKML
On Wed, Jul 18, 2018 at 03:52:26PM +0530, Amit Kucheria wrote:
> On Fri, May 25, 2018 at 4:02 PM, Viresh Kumar <viresh.kumar@linaro.org> wrote:
> > The OPP properties, like "operating-points", should either be present
> > for all the CPUs of a cluster or none. If these are present only for a
> > subset of CPUs of a cluster then things will start falling apart as soon
> > as the CPUs are brought online in a different order. For example, this
> > will happen because the operating system looks for such properties in
> > the CPU node it is trying to bring up, so that it can create an OPP
> > table.
> >
> > Add such missing properties.
> >
> > Fix other missing property (clock latency) as well to make it all
> > work.
> >
> > Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
>
> FWIW,
> Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Picking this up for 4.19. thanks.
Andy
^ permalink raw reply [flat|nested] 107+ messages in thread
end of thread, other threads:[~2018-07-21 18:56 UTC | newest]
Thread overview: 107+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-05-25 10:31 [PATCH 00/15] arm: dts: Fix OPP and cooling device properties Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-25 10:31 ` [PATCH 01/15] arm: dts: armada: Fix "#cooling-cells" property's name Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-28 14:53 ` Gregory CLEMENT
2018-05-28 14:53 ` Gregory CLEMENT
2018-05-28 14:53 ` Gregory CLEMENT
2018-05-25 10:31 ` [PATCH 02/15] arm: dts: ls1021a: Add missing cooling device properties for CPUs Viresh Kumar
2018-07-03 1:35 ` Shawn Guo
2018-05-25 10:31 ` [PATCH 03/15] arm: dts: mediatek: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-06-25 14:58 ` Matthias Brugger
2018-06-25 14:58 ` Matthias Brugger
2018-05-25 10:31 ` [PATCH 04/15] arm: dts: rk322x: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-06-17 14:47 ` Heiko Stuebner
2018-06-17 14:47 ` Heiko Stuebner
2018-05-25 10:31 ` [PATCH 05/15] arm: dts: uniphier: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-06-01 3:25 ` Masahiro Yamada
2018-06-01 3:25 ` Masahiro Yamada
2018-05-25 10:31 ` [PATCH 06/15] arm: dts: sun: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-28 8:44 ` Maxime Ripard
2018-05-28 8:44 ` Maxime Ripard
2018-05-28 10:57 ` Viresh Kumar
2018-05-28 10:57 ` Viresh Kumar
2018-05-28 10:57 ` Viresh Kumar
2018-06-01 15:17 ` Maxime Ripard
2018-06-01 15:17 ` Maxime Ripard
2018-06-05 4:47 ` [PATCH V2 1/2] arm: dts: sun8i-h3: " Viresh Kumar
2018-06-05 4:47 ` Viresh Kumar
2018-06-05 4:47 ` [PATCH V2 2/2] arm: dts: sunxi: " Viresh Kumar
2018-06-05 4:47 ` Viresh Kumar
2018-06-05 7:11 ` Maxime Ripard
2018-06-05 7:11 ` Maxime Ripard
2018-06-05 16:02 ` Chen-Yu Tsai
2018-06-05 16:02 ` Chen-Yu Tsai
2018-06-06 6:58 ` Maxime Ripard
2018-06-06 6:58 ` Maxime Ripard
2018-05-25 10:31 ` [PATCH 07/15] arm: dts: exynos: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-29 13:18 ` Krzysztof Kozlowski
2018-05-29 13:18 ` Krzysztof Kozlowski
2018-05-30 4:38 ` Viresh Kumar
2018-05-30 4:38 ` Viresh Kumar
2018-05-30 12:32 ` Krzysztof Kozlowski
2018-05-30 12:32 ` Krzysztof Kozlowski
2018-05-31 5:22 ` Viresh Kumar
2018-05-31 5:22 ` Viresh Kumar
2018-06-20 18:44 ` Krzysztof Kozlowski
2018-06-20 18:44 ` Krzysztof Kozlowski
2018-05-25 10:31 ` [PATCH 08/15] arm: dts: dra74x: " Viresh Kumar
2018-07-03 6:43 ` Tony Lindgren
2018-05-25 10:31 ` [PATCH 09/15] arm: dts: omap: " Viresh Kumar
2018-07-03 6:44 ` Tony Lindgren
2018-05-25 10:31 ` [PATCH 10/15] arm: dts: rk3288: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-06-17 14:47 ` Heiko Stuebner
2018-06-17 14:47 ` Heiko Stuebner
2018-05-25 10:31 ` [PATCH 11/15] arm: dts: berlin: Add missing OPP " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-05-25 10:31 ` [PATCH 12/15] arm: dts: highbank: " Viresh Kumar
2018-05-25 10:31 ` Viresh Kumar
2018-07-02 20:25 ` Rob Herring
2018-07-02 20:25 ` Rob Herring
2018-07-02 20:25 ` Rob Herring
2018-07-02 23:27 ` Olof Johansson
2018-07-02 23:27 ` Olof Johansson
2018-07-02 23:27 ` Olof Johansson
2018-07-03 4:13 ` Viresh Kumar
2018-07-03 4:13 ` Viresh Kumar
2018-07-03 4:13 ` Viresh Kumar
2018-07-03 14:46 ` Olof Johansson
2018-07-03 14:46 ` Olof Johansson
2018-07-03 14:46 ` Olof Johansson
2018-05-25 10:31 ` [PATCH 13/15] arm: dts: r8a7743: " Viresh Kumar
2018-05-28 9:23 ` Simon Horman
2018-05-28 10:58 ` Viresh Kumar
2018-05-28 11:58 ` Simon Horman
2018-05-29 13:33 ` Biju Das
2018-05-30 4:47 ` Viresh Kumar
2018-05-30 4:46 ` [PATCH V2 13/15] arm: dts: r8a77xx: " Viresh Kumar
2018-05-31 14:24 ` Simon Horman
2018-06-04 9:57 ` Simon Horman
2018-06-11 9:26 ` Geert Uytterhoeven
2018-05-25 10:32 ` [PATCH 14/15] arm: dts: qcom: " Viresh Kumar
2018-07-18 6:08 ` Viresh Kumar
2018-07-18 10:22 ` Amit Kucheria
2018-07-18 10:22 ` Amit Kucheria
2018-07-21 18:56 ` Andy Gross
2018-07-21 18:56 ` Andy Gross
2018-05-25 10:32 ` [PATCH 15/15] arm: dts: imx: " Viresh Kumar
2018-05-25 10:32 ` Viresh Kumar
2018-05-25 11:46 ` Lucas Stach
2018-05-25 11:46 ` Lucas Stach
2018-05-28 11:07 ` Viresh Kumar
2018-05-28 11:07 ` Viresh Kumar
2018-07-03 7:12 ` Shawn Guo
2018-07-03 7:12 ` Shawn Guo
2018-07-03 8:56 ` Lucas Stach
2018-07-03 8:56 ` Lucas Stach
2018-07-03 12:34 ` Shawn Guo
2018-07-03 12:34 ` Shawn Guo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.