All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>,
	Cyril Chemparathy <cyril@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Rob Herring <robh@kernel.org>, Lukas Wunner <lukas@wunner.de>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
	linux-omap@vger.kernel.org, netdev@vger.kernel.org,
	kernel-janitors@vger.kernel.org
Subject: [PATCH -net] net: ethernet: davinci_emac: fix error handling in probe()
Date: Thu, 31 May 2018 09:44:49 +0300	[thread overview]
Message-ID: <20180531064449.y2do4kjban2hmatz@kili.mountain> (raw)

The current error handling code has an issue where it does:

	if (priv->txchan)
		cpdma_chan_destroy(priv->txchan);

The problem is that ->txchan is either valid or an error pointer (which
would lead to an Oops).  I've changed it to use multiple error labels so
that the test can be removed.

Also there were some missing calls to netif_napi_del().

Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index be0fec17d95d..06d7c9e4dcda 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1873,7 +1873,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->txchan)) {
 		dev_err(&pdev->dev, "error initializing tx dma channel\n");
 		rc = PTR_ERR(priv->txchan);
-		goto no_cpdma_chan;
+		goto err_free_dma;
 	}
 
 	priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
@@ -1881,14 +1881,14 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->rxchan)) {
 		dev_err(&pdev->dev, "error initializing rx dma channel\n");
 		rc = PTR_ERR(priv->rxchan);
-		goto no_cpdma_chan;
+		goto err_free_txchan;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "error getting irq res\n");
 		rc = -ENOENT;
-		goto no_cpdma_chan;
+		goto err_free_rxchan;
 	}
 	ndev->irq = res->start;
 
@@ -1914,7 +1914,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		pm_runtime_put_noidle(&pdev->dev);
 		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
 			__func__, rc);
-		goto no_cpdma_chan;
+		goto err_napi_del;
 	}
 
 	/* register the network device */
@@ -1924,7 +1924,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "error in register_netdev\n");
 		rc = -ENODEV;
 		pm_runtime_put(&pdev->dev);
-		goto no_cpdma_chan;
+		goto err_napi_del;
 	}
 
 
@@ -1937,11 +1937,13 @@ static int davinci_emac_probe(struct platform_device *pdev)
 
 	return 0;
 
-no_cpdma_chan:
-	if (priv->txchan)
-		cpdma_chan_destroy(priv->txchan);
-	if (priv->rxchan)
-		cpdma_chan_destroy(priv->rxchan);
+err_napi_del:
+	netif_napi_del(&priv->napi);
+err_free_rxchan:
+	cpdma_chan_destroy(priv->rxchan);
+err_free_txchan:
+	cpdma_chan_destroy(priv->txchan);
+err_free_dma:
 	cpdma_ctlr_destroy(priv->dma);
 no_pdata:
 	if (of_phy_is_fixed_link(np))

WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <dan.carpenter@oracle.com>
To: Grygorii Strashko <grygorii.strashko@ti.com>,
	Cyril Chemparathy <cyril@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Rob Herring <robh@kernel.org>, Lukas Wunner <lukas@wunner.de>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>,
	linux-omap@vger.kernel.org, netdev@vger.kernel.org,
	kernel-janitors@vger.kernel.org
Subject: [PATCH -net] net: ethernet: davinci_emac: fix error handling in probe()
Date: Thu, 31 May 2018 06:44:49 +0000	[thread overview]
Message-ID: <20180531064449.y2do4kjban2hmatz@kili.mountain> (raw)

The current error handling code has an issue where it does:

	if (priv->txchan)
		cpdma_chan_destroy(priv->txchan);

The problem is that ->txchan is either valid or an error pointer (which
would lead to an Oops).  I've changed it to use multiple error labels so
that the test can be removed.

Also there were some missing calls to netif_napi_del().

Fixes: 3ef0fdb2342c ("net: davinci_emac: switch to new cpdma layer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>

diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
index be0fec17d95d..06d7c9e4dcda 100644
--- a/drivers/net/ethernet/ti/davinci_emac.c
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -1873,7 +1873,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->txchan)) {
 		dev_err(&pdev->dev, "error initializing tx dma channel\n");
 		rc = PTR_ERR(priv->txchan);
-		goto no_cpdma_chan;
+		goto err_free_dma;
 	}
 
 	priv->rxchan = cpdma_chan_create(priv->dma, EMAC_DEF_RX_CH,
@@ -1881,14 +1881,14 @@ static int davinci_emac_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->rxchan)) {
 		dev_err(&pdev->dev, "error initializing rx dma channel\n");
 		rc = PTR_ERR(priv->rxchan);
-		goto no_cpdma_chan;
+		goto err_free_txchan;
 	}
 
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!res) {
 		dev_err(&pdev->dev, "error getting irq res\n");
 		rc = -ENOENT;
-		goto no_cpdma_chan;
+		goto err_free_rxchan;
 	}
 	ndev->irq = res->start;
 
@@ -1914,7 +1914,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		pm_runtime_put_noidle(&pdev->dev);
 		dev_err(&pdev->dev, "%s: failed to get_sync(%d)\n",
 			__func__, rc);
-		goto no_cpdma_chan;
+		goto err_napi_del;
 	}
 
 	/* register the network device */
@@ -1924,7 +1924,7 @@ static int davinci_emac_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "error in register_netdev\n");
 		rc = -ENODEV;
 		pm_runtime_put(&pdev->dev);
-		goto no_cpdma_chan;
+		goto err_napi_del;
 	}
 
 
@@ -1937,11 +1937,13 @@ static int davinci_emac_probe(struct platform_device *pdev)
 
 	return 0;
 
-no_cpdma_chan:
-	if (priv->txchan)
-		cpdma_chan_destroy(priv->txchan);
-	if (priv->rxchan)
-		cpdma_chan_destroy(priv->rxchan);
+err_napi_del:
+	netif_napi_del(&priv->napi);
+err_free_rxchan:
+	cpdma_chan_destroy(priv->rxchan);
+err_free_txchan:
+	cpdma_chan_destroy(priv->txchan);
+err_free_dma:
 	cpdma_ctlr_destroy(priv->dma);
 no_pdata:
 	if (of_phy_is_fixed_link(np))

             reply	other threads:[~2018-05-31  6:45 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-31  6:44 Dan Carpenter [this message]
2018-05-31  6:44 ` [PATCH -net] net: ethernet: davinci_emac: fix error handling in probe() Dan Carpenter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180531064449.y2do4kjban2hmatz@kili.mountain \
    --to=dan.carpenter@oracle.com \
    --cc=cyril@ti.com \
    --cc=davem@davemloft.net \
    --cc=f.fainelli@gmail.com \
    --cc=grygorii.strashko@ti.com \
    --cc=ivan.khoronzhuk@linaro.org \
    --cc=kernel-janitors@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=lukas@wunner.de \
    --cc=netdev@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.