Hi!

> This series adds a new subsystem for GNSS receivers (e.g. GPS
> receivers).
> 
> While GNSS receivers are typically accessed using a UART interface they
> often also support other I/O interfaces such as I2C, SPI and USB, while
> yet other devices use iomem or even some form of remote-processor
> messaging (rpmsg).
> 
> The new GNSS subsystem abstracts the underlying interface and provides a
> new "gnss" class type, which exposes a character-device interface (e.g.
> /dev/gnss0) to user space. This allows GNSS receivers to have a
> representation in the Linux device model, something which is important
> not least for power management purposes and which also allows for easy
> detection and identification of GNSS devices.
> 
> Note that the character-device interface provides raw access to whatever
> protocol the receiver is (currently) using, such as NMEA 0183, UBX or
> SiRF Binary. These protocols are expected to be continued to be handled
> by user space for the time being, even if some hybrid solutions are also
> conceivable (e.g. to have kernel drivers issue management commands).

So.. while you did good work on serial power management, this is
grossly misnamed. There's nothing GNSS specific in the code, and you
are not presenting consistent interface to the userland.

This is _not_ GNSS subsystem. This is serial power management
subsystem, or something like that. GPS/GNSS subsystem will need to be
built on top of this.

This will never handle devices like Nokia N900, where GPS is connected
over netlink.

> Another possible extension is to add generic 1PPS support.

And there's nothing GNSS specific in the patches.

Best regards,

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html