From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: jsnow@redhat.com, peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 11/30] ahci: delete old port register address definitions
Date: Fri, 8 Jun 2018 13:47:14 -0400 [thread overview]
Message-ID: <20180608174733.4936-12-jsnow@redhat.com> (raw)
In-Reply-To: <20180608174733.4936-1-jsnow@redhat.com>
They're now unused.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-9-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
---
hw/ide/ahci_internal.h | 18 ------------------
1 file changed, 18 deletions(-)
diff --git a/hw/ide/ahci_internal.h b/hw/ide/ahci_internal.h
index eb7e1eefc0..db00c9aa39 100644
--- a/hw/ide/ahci_internal.h
+++ b/hw/ide/ahci_internal.h
@@ -102,24 +102,6 @@ enum AHCIPortReg {
AHCI_PORT_REG__COUNT = 32
};
-/* registers for each SATA port */
-#define PORT_LST_ADDR 0x00 /* command list DMA addr */
-#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
-#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
-#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
-#define PORT_IRQ_STAT 0x10 /* interrupt status */
-#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
-#define PORT_CMD 0x18 /* port command */
-
-#define PORT_TFDATA 0x20 /* taskfile data */
-#define PORT_SIG 0x24 /* device TF signature */
-#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
-#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
-#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
-#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
-#define PORT_CMD_ISSUE 0x38 /* command issue */
-#define PORT_RESERVED 0x3c /* reserved */
-
/* Port interrupt bit descriptors */
enum AHCIPortIRQ {
AHCI_PORT_IRQ_BIT_DHRS = 0,
--
2.14.3
next prev parent reply other threads:[~2018-06-08 17:47 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-08 17:47 [Qemu-devel] [PULL 00/30] Ide patches John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 01/30] ahci: trim signatures on raise/lower John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 02/30] ahci: fix PxCI register race John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 03/30] ahci: don't schedule unnecessary BH John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 04/30] ahci: add port register enumeration John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 05/30] ahci: modify ahci_port_read to use register numbers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 06/30] ahci: make port read traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 07/30] ahci: fix spacing damage on ahci_port_write John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 08/30] ahci: combine identical clauses in port write John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 09/30] ahci: modify ahci_port_write to use register numbers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 10/30] ahci: make port write traces more descriptive John Snow
2018-06-08 17:47 ` John Snow [this message]
2018-06-08 17:47 ` [Qemu-devel] [PULL 12/30] ahci: add host register enumeration John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 13/30] ahci: fix host register max address John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 14/30] ahci: modify ahci_mem_read_32 to work on register numbers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 15/30] ahci: make mem_read_32 traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 16/30] ahci: fix spacing damage on ahci_mem_write John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 17/30] ahci: adjust ahci_mem_write to work on registers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 18/30] ahci: delete old host register address definitions John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 19/30] ahci: make ahci_mem_write traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 20/30] tests/boot-sector: Add magic bytes to s390x boot code header John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 21/30] tests/cdrom-test: Test booting from CD-ROM ISO image file John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 22/30] tests/cdrom-test: Test that -cdrom parameter is working John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 23/30] MAINTAINERS: Add the cdrom-test to John's section John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 24/30] libqos/ahci: track sector size John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 25/30] ahci: move PIO Setup FIS before transfer, fix it for ATAPI commands John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 26/30] ide: push end_transfer_func out of start_transfer callback, rename callback John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 27/30] ide: call ide_cmd_done from ide_transfer_stop John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 28/30] ide: make ide_transfer_stop idempotent John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 29/30] atapi: call ide_set_irq before ide_transfer_start John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 30/30] ide: introduce ide_transfer_start_norecurse John Snow
2018-06-11 11:46 ` [Qemu-devel] [PULL 00/30] Ide patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180608174733.4936-12-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.