All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: James Hogan <jhogan@kernel.org>, Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paul.burton@mips.com>,
	linux-mips@linux-mips.org, linux-kernel@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v2 2/2] mips: generic: allow not building DTB in
Date: Tue, 26 Jun 2018 13:57:12 +0200	[thread overview]
Message-ID: <20180626115712.11643-2-alexandre.belloni@bootlin.com> (raw)
In-Reply-To: <20180626115712.11643-1-alexandre.belloni@bootlin.com>

Allow not building any DTB in the generic kernel so it gets smaller. This
is necessary for ocelot because it can be built as a legacy platform that
needs a built-in DTB and it can also handle a separate DTB once it is
updated with a more modern bootloader. In the latter case, it is preferable
to not include any DTB in the kernel image so it is smaller.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
Changes in v2:
 - rebased on v4.18-rc1

 arch/mips/Kconfig               | 1 -
 arch/mips/Makefile              | 2 +-
 arch/mips/generic/Kconfig       | 1 +
 arch/mips/generic/vmlinux.its.S | 2 ++
 4 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 3f9deec70b92..2cc43f51fa6f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -85,7 +85,6 @@ choice
 config MIPS_GENERIC
 	bool "Generic board-agnostic MIPS kernel"
 	select BOOT_RAW
-	select BUILTIN_DTB
 	select CEVT_R4K
 	select CLKSRC_MIPS_GIC
 	select COMMON_CLK
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index e2122cca4ae2..5c5d491d736e 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -401,7 +401,7 @@ endif
 CLEAN_FILES += vmlinux.32 vmlinux.64
 
 # device-trees
-core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
+core-y += arch/mips/boot/dts/
 
 %.dtb %.dtb.S %.dtb.o: | scripts
 	$(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
diff --git a/arch/mips/generic/Kconfig b/arch/mips/generic/Kconfig
index 08e33c6b2539..13692b84928e 100644
--- a/arch/mips/generic/Kconfig
+++ b/arch/mips/generic/Kconfig
@@ -3,6 +3,7 @@ if MIPS_GENERIC
 
 config LEGACY_BOARDS
 	bool
+	select BUILTIN_DTB
 	help
 	  Select this from your board if the board must use a legacy, non-UHI,
 	  boot protocol. This will cause the kernel to scan through the list of
diff --git a/arch/mips/generic/vmlinux.its.S b/arch/mips/generic/vmlinux.its.S
index 1a08438fd893..9c954f2ae561 100644
--- a/arch/mips/generic/vmlinux.its.S
+++ b/arch/mips/generic/vmlinux.its.S
@@ -21,6 +21,7 @@
 		};
 	};
 
+#if IS_ENABLED(CONFIG_BUILTIN_DTB)
 	configurations {
 		default = "conf@default";
 
@@ -29,4 +30,5 @@
 			kernel = "kernel@0";
 		};
 	};
+#endif
 };
-- 
2.18.0


  reply	other threads:[~2018-06-26 11:57 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-26 11:57 [PATCH v2 1/2] mips: mscc: build FIT image for Ocelot Alexandre Belloni
2018-06-26 11:57 ` Alexandre Belloni [this message]
2018-06-26 14:07   ` [PATCH v2 2/2] mips: generic: allow not building DTB in Alexandre Belloni
2018-06-27 16:01     ` Paul Burton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180626115712.11643-2-alexandre.belloni@bootlin.com \
    --to=alexandre.belloni@bootlin.com \
    --cc=jhogan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@linux-mips.org \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.