Re: [PATCH 07/11] cpufreq/schedutil: take into account interrupt

[Viresh Kumar <viresh.kumar@linaro.org>]

On 28-06-18, 17:45, Vincent Guittot wrote:
> The time spent under interrupt can be significant but it is not reflected
> in the utilization of CPU when deciding to choose an OPP. Now that we have
> access to this metric, schedutil can take it into account when selecting
> the OPP for a CPU.
> rqs utilization don't see the time spend under interrupt context and report
> their value in the normal context time window. We need to compensate this when
> adding interrupt utilization
> 
> The CPU utilization is :
>   irq util_avg + (1 - irq util_avg / max capacity ) * /Sum rq util_avg
> 
> A test with iperf on hikey (octo arm64) gives:
> iperf -c server_address -r -t 5
> 
> w/o patch		w/ patch
> Tx 276 Mbits/sec        304 Mbits/sec +10%
> Rx 299 Mbits/sec        328 Mbits/sec +09%
> 
> 8 iterations
> stdev is lower than 1%
> Only WFI idle state is enable (shallowest diel state)
> 
> Cc: Ingo Molnar <mingo@redhat.com>
> Cc: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
> ---
>  kernel/sched/cpufreq_schedutil.c | 25 +++++++++++++++++++++----
>  kernel/sched/sched.h             | 13 +++++++++++++
>  2 files changed, 34 insertions(+), 4 deletions(-)
> 
> diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
> index edfbfc1..b77bfef 100644
> --- a/kernel/sched/cpufreq_schedutil.c
> +++ b/kernel/sched/cpufreq_schedutil.c
> @@ -58,6 +58,7 @@ struct sugov_cpu {
>  	unsigned long		util_dl;
>  	unsigned long		bw_dl;
>  	unsigned long		util_rt;
> +	unsigned long		util_irq;
>  	unsigned long		max;
>  
>  	/* The field below is for single-CPU policies only: */
> @@ -190,21 +191,30 @@ static void sugov_get_util(struct sugov_cpu *sg_cpu)
>  	sg_cpu->util_dl  = cpu_util_dl(rq);
>  	sg_cpu->bw_dl    = cpu_bw_dl(rq);
>  	sg_cpu->util_rt  = cpu_util_rt(rq);
> +	sg_cpu->util_irq = cpu_util_irq(rq);
>  }
>  
>  static unsigned long sugov_aggregate_util(struct sugov_cpu *sg_cpu)
>  {
>  	struct rq *rq = cpu_rq(sg_cpu->cpu);
> -	unsigned long util;
> +	unsigned long util, max = sg_cpu->max;
>  
>  	if (rq->rt.rt_nr_running)
>  		return sg_cpu->max;
>  
> +	if (unlikely(sg_cpu->util_irq >= max))
> +		return max;
> +
> +	/* Sum rq utilization */
>  	util = sg_cpu->util_cfs;
>  	util += sg_cpu->util_rt;
>  
> -	if ((util + sg_cpu->util_dl) >= sg_cpu->max)
> -		return sg_cpu->max;
> +	/*
> +	 * Interrupt time is not seen by rqs utilization nso we can compare

                                                         nso ?

> +	 * them with the CPU capacity
> +	 */
> +	if ((util + sg_cpu->util_dl) >= max)
> +		return max;
>  
>  	/*
>  	 * As there is still idle time on the CPU, we need to compute the
> @@ -220,10 +230,17 @@ static unsigned long sugov_aggregate_util(struct sugov_cpu *sg_cpu)
>  	 * ready for such an interface. So, we only do the latter for now.
>  	 */
>  
> +	/* Weight rqs utilization to normal context window */
> +	util *= (max - sg_cpu->util_irq);
> +	util /= max;
> +
> +	/* Add interrupt utilization */
> +	util += sg_cpu->util_irq;
> +
>  	/* Add DL bandwidth requirement */
>  	util += sg_cpu->bw_dl;
>  
> -	return min(sg_cpu->max, util);
> +	return min(max, util);
>  }
>  
>  /**
> diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
> index 377be2b..9438e68 100644
> --- a/kernel/sched/sched.h
> +++ b/kernel/sched/sched.h
> @@ -2221,4 +2221,17 @@ static inline unsigned long cpu_util_rt(struct rq *rq)
>  {
>  	return rq->avg_rt.util_avg;
>  }
> +
> +#if defined(CONFIG_IRQ_TIME_ACCOUNTING) || defined(CONFIG_PARAVIRT_TIME_ACCOUNTING)
> +static inline unsigned long cpu_util_irq(struct rq *rq)
> +{
> +	return rq->avg_irq.util_avg;
> +}
> +#else
> +static inline unsigned long cpu_util_irq(struct rq *rq)
> +{
> +	return 0;
> +}
> +
> +#endif
>  #endif

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>

-- 
viresh