From mboxrd@z Thu Jan 1 00:00:00 1970 From: Greg Kroah-Hartman Subject: Re: [PATCH v2 1/7] mhi_bus: core: initial checkin for modem host interface bus driver Date: Mon, 9 Jul 2018 22:50:47 +0200 Message-ID: <20180709205047.GA1202@kroah.com> References: <1524795811-21399-1-git-send-email-sdias@codeaurora.org> <1531166894-30984-1-git-send-email-sdias@codeaurora.org> <1531166894-30984-2-git-send-email-sdias@codeaurora.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1531166894-30984-2-git-send-email-sdias@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org To: Sujeev Dias Cc: Arnd Bergmann , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, Tony Truong , Siddartha Mohanadoss List-Id: linux-arm-msm@vger.kernel.org On Mon, Jul 09, 2018 at 01:08:08PM -0700, Sujeev Dias wrote: > This is the initial skeleton driver for mhi bus stack. MHI Host > Interface is a communication protocol to be used by the host to > control and communcate with modem over a high speed peripheral bus. > This module will allow host to communicate with external devices that > support MHI protocol. > > Signed-off-by: Sujeev Dias > Reviewed-by: Tony Truong > Signed-off-by: Siddartha Mohanadoss > --- > Documentation/00-INDEX | 2 + > Documentation/devicetree/bindings/bus/mhi.txt | 258 ++++++++++++ > Documentation/mhi.txt | 235 +++++++++++ > drivers/bus/Kconfig | 8 + > drivers/bus/Makefile | 1 + > drivers/bus/mhi/Makefile | 6 + > drivers/bus/mhi/core/Makefile | 1 + > drivers/bus/mhi/core/mhi_init.c | 538 ++++++++++++++++++++++++++ > drivers/bus/mhi/core/mhi_internal.h | 238 ++++++++++++ > drivers/bus/mhi/core/mhi_main.c | 122 ++++++ > include/linux/mhi.h | 341 ++++++++++++++++ > include/linux/mod_devicetable.h | 12 + > 12 files changed, 1762 insertions(+) > create mode 100644 Documentation/devicetree/bindings/bus/mhi.txt > create mode 100644 Documentation/mhi.txt > create mode 100644 drivers/bus/mhi/Makefile > create mode 100644 drivers/bus/mhi/core/Makefile > create mode 100644 drivers/bus/mhi/core/mhi_init.c > create mode 100644 drivers/bus/mhi/core/mhi_internal.h > create mode 100644 drivers/bus/mhi/core/mhi_main.c > create mode 100644 include/linux/mhi.h You don't say what changed from v1 here :( Please do so...