All of lore.kernel.org
 help / color / mirror / Atom feed
From: andy.tang at nxp.com <andy.tang@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/4 v3] armv8: fsl: remove sata support
Date: Fri, 13 Jul 2018 17:25:28 +0800	[thread overview]
Message-ID: <20180713092531.18414-1-andy.tang@nxp.com> (raw)

From: Yuantian Tang <andy.tang@nxp.com>

Remove the old implementation in order to enable DM for sata

Signed-off-by: Tang Yuantian <andy.tang@nxp.com>
---
v3:
    - rebase to latest code
v2:
    - no changes

 arch/arm/cpu/armv8/fsl-layerscape/soc.c        |   54 ------------------------
 arch/arm/include/asm/arch-fsl-layerscape/soc.h |   32 --------------
 2 files changed, 0 insertions(+), 86 deletions(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index bfd6639..8028d52 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -6,8 +6,6 @@
 #include <common.h>
 #include <fsl_immap.h>
 #include <fsl_ifc.h>
-#include <ahci.h>
-#include <scsi.h>
 #include <asm/arch/fsl_serdes.h>
 #include <asm/arch/soc.h>
 #include <asm/io.h>
@@ -330,36 +328,6 @@ void fsl_lsch3_early_init_f(void)
 #endif
 }
 
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci;
-
-#ifdef CONFIG_SYS_SATA2
-	ccsr_ahci  = (void *)CONFIG_SYS_SATA2;
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-#endif
-
-#ifdef CONFIG_SYS_SATA1
-	ccsr_ahci  = (void *)CONFIG_SYS_SATA1;
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
-	ahci_init((void __iomem *)CONFIG_SYS_SATA1);
-	scsi_scan(false);
-#endif
-
-	return 0;
-}
-#endif
-
 /* Get VDD in the unit mV from voltage ID */
 int get_core_volt_from_fuse(void)
 {
@@ -400,25 +368,6 @@ int get_core_volt_from_fuse(void)
 }
 
 #elif defined(CONFIG_FSL_LSCH2)
-#ifdef CONFIG_SCSI_AHCI_PLAT
-int sata_init(void)
-{
-	struct ccsr_ahci __iomem *ccsr_ahci = (void *)CONFIG_SYS_SATA;
-
-	/* Disable SATA ECC */
-	out_le32((void *)CONFIG_SYS_DCSR_DCFG_ADDR + 0x520, 0x80000000);
-	out_le32(&ccsr_ahci->ppcfg, AHCI_PORT_PHY_1_CFG);
-	out_le32(&ccsr_ahci->pp2c, AHCI_PORT_PHY2_CFG);
-	out_le32(&ccsr_ahci->pp3c, AHCI_PORT_PHY3_CFG);
-	out_le32(&ccsr_ahci->ptc, AHCI_PORT_TRANS_CFG);
-	out_le32(&ccsr_ahci->axicc, AHCI_PORT_AXICC_CFG);
-
-	ahci_init((void __iomem *)CONFIG_SYS_SATA);
-	scsi_scan(false);
-
-	return 0;
-}
-#endif
 
 static void erratum_a009929(void)
 {
@@ -719,9 +668,6 @@ int qspi_ahb_init(void)
 #ifdef CONFIG_BOARD_LATE_INIT
 int board_late_init(void)
 {
-#ifdef CONFIG_SCSI_AHCI_PLAT
-	sata_init();
-#endif
 #ifdef CONFIG_CHAIN_OF_TRUST
 	fsl_setenv_chain_of_trust();
 #endif
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
index 9a219a6..6e3a420 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h
@@ -85,39 +85,7 @@ struct cpu_type {
 #define SVR_DEV(svr)		((svr) >> 8)
 #define IS_SVR_DEV(svr, dev)	(((svr) >> 16) == (dev))
 
-/* ahci port register default value */
-#define AHCI_PORT_PHY_1_CFG    0xa003fffe
-#define AHCI_PORT_PHY2_CFG	0x28184d1f
-#define AHCI_PORT_PHY3_CFG	0x0e081509
-#define AHCI_PORT_TRANS_CFG    0x08000029
-#define AHCI_PORT_AXICC_CFG	0x3fffffff
-
 #ifndef __ASSEMBLY__
-/* AHCI (sata) register map */
-struct ccsr_ahci {
-	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
-	u32 pcfg;	/* port config */
-	u32 ppcfg;	/* port phy1 config */
-	u32 pp2c;	/* port phy2 config */
-	u32 pp3c;	/* port phy3 config */
-	u32 pp4c;	/* port phy4 config */
-	u32 pp5c;	/* port phy5 config */
-	u32 axicc;	/* AXI cache control */
-	u32 paxic;	/* port AXI config */
-	u32 axipc;	/* AXI PROT control */
-	u32 ptc;	/* port Trans Config */
-	u32 pts;	/* port Trans Status */
-	u32 plc;	/* port link config */
-	u32 plc1;	/* port link config1 */
-	u32 plc2;	/* port link config2 */
-	u32 pls;	/* port link status */
-	u32 pls1;	/* port link status1 */
-	u32 pcmdc;	/* port CMD config */
-	u32 ppcs;	/* port phy control status */
-	u32 pberr;	/* port 0/1 BIST error */
-	u32 cmds;	/* port 0/1 CMD status error */
-};
-
 #ifdef CONFIG_FSL_LSCH3
 void fsl_lsch3_early_init_f(void);
 int get_core_volt_from_fuse(void);
-- 
1.7.1

             reply	other threads:[~2018-07-13  9:25 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-13  9:25 andy.tang at nxp.com [this message]
2018-07-13  9:25 ` [U-Boot] [PATCH 2/4 v3] armv8: dts: fsl-ls1012a: add sata node support andy.tang at nxp.com
2018-07-13  9:25   ` [U-Boot] [PATCH 3/4 v3] scsi: ceva: add ls1012a soc support andy.tang at nxp.com
2018-07-13  9:25     ` [U-Boot] [PATCH 4/4 v3] arm64: ls1012a: enable DM support for sata andy.tang at nxp.com
2018-07-16  5:19   ` [U-Boot] [PATCH 2/4 v3] armv8: dts: fsl-ls1012a: add sata node support Simon Glass
2018-07-16  5:19 ` [U-Boot] [PATCH 1/4 v3] armv8: fsl: remove sata support Simon Glass
2018-07-27 15:36 ` York Sun

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180713092531.18414-1-andy.tang@nxp.com \
    --to=andy.tang@nxp.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.