From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Jones Subject: Re: [PATCH v4 10/10] KVM: arm/arm64: vgic: Update documentation of the GIC devices wrt IIDR Date: Thu, 19 Jul 2018 19:08:30 +0200 Message-ID: <20180719170830.cjrob66sjz522d33@kamzik.brq.redhat.com> References: <1531746387-7033-1-git-send-email-christoffer.dall@arm.com> <1531746387-7033-11-git-send-email-christoffer.dall@arm.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: kvm@vger.kernel.org, Marc Zyngier , Andre Przywara , kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org To: Christoffer Dall Return-path: Content-Disposition: inline In-Reply-To: <1531746387-7033-11-git-send-email-christoffer.dall@arm.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: kvmarm-bounces@lists.cs.columbia.edu Sender: kvmarm-bounces@lists.cs.columbia.edu List-Id: kvm.vger.kernel.org On Mon, Jul 16, 2018 at 03:06:27PM +0200, Christoffer Dall wrote: > Update the documentation to reflect the ordering requirements of > restoring the GICD_IIDR register before any other registers and the > effects this has on restoring the interrupt groups for an emulated GICv2 > insttance. instance > > Also remove some outdated limitations in the documentation while we're > at it. > > Signed-off-by: Christoffer Dall > --- > Documentation/virtual/kvm/devices/arm-vgic-v3.txt | 8 ++++++++ > Documentation/virtual/kvm/devices/arm-vgic.txt | 15 +++++++++------ > 2 files changed, 17 insertions(+), 6 deletions(-) > > diff --git a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt > index 2408ab7..eba20ae 100644 > --- a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt > +++ b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt > @@ -100,6 +100,14 @@ Groups: > Note that distributor fields are not banked, but return the same value > regardless of the mpidr used to access the register. > > + GICD_IIDR.Revision is updated when the KVM implementation is changed in a > + way directly observable by the guest or userspace. Userspace should read > + GICD_IIDR from KVM and write back the read value to confirm its expected > + behavior is aligned with the KVM implementation. Userspace should set > + GICD_IIDR before setting any other registers. to ensure the expected s/. // > + behavior. > + > + > The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such > that a write of a clear bit has no effect, whereas a write with a set bit > clears that value. To allow userspace to freely set the values of these two > diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt > index b3ce126..4ff7635 100644 > --- a/Documentation/virtual/kvm/devices/arm-vgic.txt > +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt > @@ -49,9 +49,15 @@ Groups: > index is specified with the vcpu_index field. Note that most distributor > fields are not banked, but return the same value regardless of the > vcpu_index used to access the register. > - Limitations: > - - Priorities are not implemented, and registers are RAZ/WI > - - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2. > + > + GICD_IIDR.Revision is updated when the KVM implementation of an emulated > + GICv2 is changed in a way directly observable by the guest or userspace. > + Userspace should read GICD_IIDR from KVM and write back the read value to > + confirm its expected behavior is aligned with the KVM implementation. > + Userspace should set GICD_IIDR before setting any other registers (both > + KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS) to ensure > + the expected behavior. Unless GICD_IIDR has been set from userspace, writes > + to the interrupt group registers (GICD_IGROUPR) are ignored. > Errors: > -ENXIO: Getting or setting this register is not yet supported > -EBUSY: One or more VCPUs are running > @@ -94,9 +100,6 @@ Groups: > use the lower 5 bits to communicate with the KVM device and must shift the > value left by 3 places to obtain the actual priority mask level. > > - Limitations: > - - Priorities are not implemented, and registers are RAZ/WI > - - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2. > Errors: > -ENXIO: Getting or setting this register is not yet supported > -EBUSY: One or more VCPUs are running > -- > 2.7.4 > Otherwise Reviewed-by: Andrew Jones From mboxrd@z Thu Jan 1 00:00:00 1970 From: drjones@redhat.com (Andrew Jones) Date: Thu, 19 Jul 2018 19:08:30 +0200 Subject: [PATCH v4 10/10] KVM: arm/arm64: vgic: Update documentation of the GIC devices wrt IIDR In-Reply-To: <1531746387-7033-11-git-send-email-christoffer.dall@arm.com> References: <1531746387-7033-1-git-send-email-christoffer.dall@arm.com> <1531746387-7033-11-git-send-email-christoffer.dall@arm.com> Message-ID: <20180719170830.cjrob66sjz522d33@kamzik.brq.redhat.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Mon, Jul 16, 2018 at 03:06:27PM +0200, Christoffer Dall wrote: > Update the documentation to reflect the ordering requirements of > restoring the GICD_IIDR register before any other registers and the > effects this has on restoring the interrupt groups for an emulated GICv2 > insttance. instance > > Also remove some outdated limitations in the documentation while we're > at it. > > Signed-off-by: Christoffer Dall > --- > Documentation/virtual/kvm/devices/arm-vgic-v3.txt | 8 ++++++++ > Documentation/virtual/kvm/devices/arm-vgic.txt | 15 +++++++++------ > 2 files changed, 17 insertions(+), 6 deletions(-) > > diff --git a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt > index 2408ab7..eba20ae 100644 > --- a/Documentation/virtual/kvm/devices/arm-vgic-v3.txt > +++ b/Documentation/virtual/kvm/devices/arm-vgic-v3.txt > @@ -100,6 +100,14 @@ Groups: > Note that distributor fields are not banked, but return the same value > regardless of the mpidr used to access the register. > > + GICD_IIDR.Revision is updated when the KVM implementation is changed in a > + way directly observable by the guest or userspace. Userspace should read > + GICD_IIDR from KVM and write back the read value to confirm its expected > + behavior is aligned with the KVM implementation. Userspace should set > + GICD_IIDR before setting any other registers. to ensure the expected s/. // > + behavior. > + > + > The GICD_STATUSR and GICR_STATUSR registers are architecturally defined such > that a write of a clear bit has no effect, whereas a write with a set bit > clears that value. To allow userspace to freely set the values of these two > diff --git a/Documentation/virtual/kvm/devices/arm-vgic.txt b/Documentation/virtual/kvm/devices/arm-vgic.txt > index b3ce126..4ff7635 100644 > --- a/Documentation/virtual/kvm/devices/arm-vgic.txt > +++ b/Documentation/virtual/kvm/devices/arm-vgic.txt > @@ -49,9 +49,15 @@ Groups: > index is specified with the vcpu_index field. Note that most distributor > fields are not banked, but return the same value regardless of the > vcpu_index used to access the register. > - Limitations: > - - Priorities are not implemented, and registers are RAZ/WI > - - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2. > + > + GICD_IIDR.Revision is updated when the KVM implementation of an emulated > + GICv2 is changed in a way directly observable by the guest or userspace. > + Userspace should read GICD_IIDR from KVM and write back the read value to > + confirm its expected behavior is aligned with the KVM implementation. > + Userspace should set GICD_IIDR before setting any other registers (both > + KVM_DEV_ARM_VGIC_GRP_DIST_REGS and KVM_DEV_ARM_VGIC_GRP_CPU_REGS) to ensure > + the expected behavior. Unless GICD_IIDR has been set from userspace, writes > + to the interrupt group registers (GICD_IGROUPR) are ignored. > Errors: > -ENXIO: Getting or setting this register is not yet supported > -EBUSY: One or more VCPUs are running > @@ -94,9 +100,6 @@ Groups: > use the lower 5 bits to communicate with the KVM device and must shift the > value left by 3 places to obtain the actual priority mask level. > > - Limitations: > - - Priorities are not implemented, and registers are RAZ/WI > - - Currently only implemented for KVM_DEV_TYPE_ARM_VGIC_V2. > Errors: > -ENXIO: Getting or setting this register is not yet supported > -EBUSY: One or more VCPUs are running > -- > 2.7.4 > Otherwise Reviewed-by: Andrew Jones