From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Chris Brandt Subject: [PATCH v2 2/3] serial: sh-sci: Add support for separate TEI+DRI interrupts Date: Wed, 25 Jul 2018 09:38:49 -0500 Message-Id: <20180725143850.32985-3-chris.brandt@renesas.com> In-Reply-To: <20180725143850.32985-1-chris.brandt@renesas.com> References: <20180725143850.32985-1-chris.brandt@renesas.com> To: Greg Kroah-Hartman , Rob Herring , Mark Rutland , Geert Uytterhoeven Cc: linux-serial@vger.kernel.org, devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org, Simon Horman , Chris Brandt List-ID: Some SCIF versions mux error and break interrupts together and then provide a separate interrupt ID for just TEI/DRI. Allow all 6 types of interrupts to be specified via platform data (or DT) and for any signals that are muxed together (have the same interrupt number) simply register one handler. Signed-off-by: Chris Brandt --- v2: * Move compressed SCIF reg address space to a separate commit * Handle all 6 possible interrupt types --- drivers/tty/serial/sh-sci.c | 44 +++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 41 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index d9202ad1c9ca..f1272fecbe44 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -65,6 +65,8 @@ enum { SCIx_RXI_IRQ, SCIx_TXI_IRQ, SCIx_BRI_IRQ, + SCIx_DRI_IRQ, + SCIx_TEI_IRQ, SCIx_NR_IRQS, SCIx_MUX_IRQ = SCIx_NR_IRQS, /* special case */ @@ -1683,11 +1685,26 @@ static irqreturn_t sci_tx_interrupt(int irq, void *ptr) return IRQ_HANDLED; } +static irqreturn_t sci_br_interrupt(int irq, void *ptr); + static irqreturn_t sci_er_interrupt(int irq, void *ptr) { struct uart_port *port = ptr; struct sci_port *s = to_sci_port(port); + if (s->irqs[SCIx_ERI_IRQ] == s->irqs[SCIx_BRI_IRQ]) { + /* Break and Error interrupts are muxed */ + unsigned short ssr_status = serial_port_in(port, SCxSR); + + /* Break Interrupt */ + if (ssr_status & SCxSR_BRK(port)) + sci_br_interrupt(irq, ptr); + + /* Break only? */ + if (!(ssr_status & SCxSR_ERRORS(port))) + return IRQ_HANDLED; + } + /* Handle errors */ if (port->type == PORT_SCI) { if (sci_handle_errors(port)) { @@ -1794,6 +1811,16 @@ static const struct sci_irq_desc { .handler = sci_br_interrupt, }, + [SCIx_DRI_IRQ] = { + .desc = "rx ready", + .handler = sci_rx_interrupt, + }, + + [SCIx_TEI_IRQ] = { + .desc = "tx end", + .handler = sci_tx_interrupt, + }, + /* * Special muxed handler. */ @@ -1806,12 +1833,19 @@ static const struct sci_irq_desc { static int sci_request_irq(struct sci_port *port) { struct uart_port *up = &port->port; - int i, j, ret = 0; + int i, j, w, ret = 0; for (i = j = 0; i < SCIx_NR_IRQS; i++, j++) { const struct sci_irq_desc *desc; int irq; + /* Check if already registered (muxed) */ + for (w = 0; w < i; w++) + if (port->irqs[w] == port->irqs[i]) + w = i + 1; + if (w > i) + continue; + if (SCIx_IRQ_IS_MUXED(port)) { i = SCIx_MUX_IRQ; irq = up->irq; @@ -2799,8 +2833,10 @@ static int sci_init_single(struct platform_device *dev, /* The SCI generates several interrupts. They can be muxed together or * connected to different interrupt lines. In the muxed case only one - * interrupt resource is specified. In the non-muxed case three or four - * interrupt resources are specified, as the BRI interrupt is optional. + * interrupt resource is specified as there is only one interrupt ID. + * In the non-muxed case, up to 6 interrupt signals might be generated + * from the SCI, however those signals might have their own individual + * interrupt ID numbers, or muxed together with another interrupt. */ if (sci_port->irqs[0] < 0) return -ENXIO; @@ -2809,6 +2845,8 @@ static int sci_init_single(struct platform_device *dev, sci_port->irqs[1] = sci_port->irqs[0]; sci_port->irqs[2] = sci_port->irqs[0]; sci_port->irqs[3] = sci_port->irqs[0]; + sci_port->irqs[4] = sci_port->irqs[0]; + sci_port->irqs[5] = sci_port->irqs[0]; } sci_port->params = sci_probe_regmap(p); -- 2.16.1