From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 26 Jul 2018 00:25:47 +0200 Subject: [U-Boot] [PATCH v1 4/9] ARM: Odroid XU3: Fix autoboot.cmd to use ${mmcbootdev} instead of hardcoded 0 In-Reply-To: <20180725222552.3450-1-lukma@denx.de> References: <20180725222552.3450-1-lukma@denx.de> Message-ID: <20180725222552.3450-5-lukma@denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de This commit adjusts the autoboot.cmd file to use ${mmcbootdev} instead of hardcoded value 0. This is necessary to allow booting this board from the SD card. Signed-off-by: Lukasz Majewski --- board/samsung/common/bootscripts/autoboot.cmd | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/board/samsung/common/bootscripts/autoboot.cmd b/board/samsung/common/bootscripts/autoboot.cmd index 1faed8ba0c1a..11c724c4e095 100644 --- a/board/samsung/common/bootscripts/autoboot.cmd +++ b/board/samsung/common/bootscripts/autoboot.cmd @@ -74,15 +74,15 @@ setenv boot_img " #### Routine: autoboot - choose proper boot path setenv autoboot " -if test -e mmc 0:${mmcbootpart} Image.itb; then +if test -e mmc ${mmcbootdev}:${mmcbootpart} Image.itb; then echo Found kernel image: Image.itb; run setboot_fit; run boot_img; -elif test -e mmc 0:${mmcbootpart} zImage; then +elif test -e mmc ${mmcbootdev}:${mmcbootpart} zImage; then echo Found kernel image: zImage; run setboot_zimg; run boot_img; -elif test -e mmc 0:${mmcbootpart} uImage; then +elif test -e mmc ${mmcbootdev}:${mmcbootpart} uImage; then echo Found kernel image: uImage; run setboot_uimg; run boot_img; -- 2.11.0