From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Thu, 26 Jul 2018 17:53:23 +0200 Subject: [U-Boot] [PATCH v1 9/9] ARM: Odroid XU3: Modify Odroid XU3 config to boot by default from SD card In-Reply-To: References: <20180725222552.3450-1-lukma@denx.de> <20180725222552.3450-10-lukma@denx.de> Message-ID: <20180726175323.316d9a30@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Anand, > Hi Lukasz, > > On 26 July 2018 at 03:55, Lukasz Majewski wrote: > > This commit allows by default booting Odroid XU3 from the SD card > > (when e.g. eMMC module is not present). > > > > Signed-off-by: Lukasz Majewski > > > > --- > > > > include/configs/odroid_xu3.h | 7 +++++-- > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > diff --git a/include/configs/odroid_xu3.h > > b/include/configs/odroid_xu3.h index f495f6219ba9..818a06515cb2 > > 100644 --- a/include/configs/odroid_xu3.h > > +++ b/include/configs/odroid_xu3.h > > @@ -94,6 +94,9 @@ > > #undef CONFIG_SYS_BOARD > > #define CONFIG_SYS_BOARD "odroid" > > > > +#undef CONFIG_SYS_MMC_ENV_DEV > > +#define CONFIG_SYS_MMC_ENV_DEV 2 > > + > > /* Define new extra env settings, including DFU settings */ > > #undef CONFIG_EXTRA_ENV_SETTINGS > > #define CONFIG_EXTRA_ENV_SETTINGS \ > > @@ -105,8 +108,8 @@ > > "console=" CONFIG_DEFAULT_CONSOLE "\0"\ > > "fdtfile=exynos5422-odroidxu3.dtb\0" \ > > "boardname=odroidxu3\0" \ > > - "mmcbootdev=0\0" \ > > - "mmcrootdev=0\0" \ > > + "mmcbootdev=2\0" \ > > + "mmcrootdev=1\0" \ > > "mmcbootpart=1\0" \ > > "mmcrootpart=2\0" \ > > "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \ > > -- > > 2.11.0 > > > > This changes probably breaks the booting from eMMC on Odroid-XU4 I suppose, that XU4 is also equipped with SD card slot as XU3. Nonetheless, as I don't have eMMC card for mine XU3, the only way to boot my device is SD card. If you believe that this may be a problem, then I can drop this patch. Have you checked patches from 1-8? Does it work for you? If yes, please send tested-by tag. > > U-Boot 2018.07-00377-g80df37b417 (Jul 26 2018 - 10:50:16 +0000) for > ODROID-XU3/XU4/HC1 > > CPU: Exynos5422 @ 800 MHz > Model: Odroid XU3 based on EXYNOS5422 > Board: Odroid XU3 based on EXYNOS5422 > Type: xu4 > DRAM: 2 GiB > MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 > Loading Environment from MMC... Card did not respond to voltage > select! *** Warning - No block device, using default environment > > Failed (-5) > In: serial > Out: serial > Err: serial > Net: No ethernet found. > Hit any key to stop autoboot: 0 > MMC Device 1 not found > no mmc device at slot 1 > switch to partitions #0, OK > mmc0(part 0) is current device > Scanning mmc 0:1... > Found U-Boot script /boot.scr > 3069 bytes read in 6 ms (499 KiB/s) > ## Executing script at 50000000 > Card did not respond to voltage select! > ** Bad device mmc 2 ** > Card did not respond to voltage select! > ** Bad device mmc 2 ** > Card did not respond to voltage select! > ** Bad device mmc 2 ** > SCRIPT FAILED: continuing... > 63776 bytes read in 7 ms (8.7 MiB/s) > Card did not respond to voltage select! > starting USB... > USB0: USB EHCI 1.00 > USB1: Register 2000140 NbrPorts 2 > Starting the controller > USB XHCI 1.00 > USB2: Register 2000140 NbrPorts 2 > Starting the controller > USB XHCI 1.00 > scanning bus 0 for devices... 1 USB Device(s) found > scanning bus 1 for devices... 3 USB Device(s) found > scanning bus 2 for devices... 2 USB Device(s) found > scanning usb for storage devices... 0 Storage Device(s) found > scanning usb for ethernet devices... 1 Ethernet Device(s) found > Waiting for Ethernet connection... done. > BOOTP broadcast 1 > BOOTP broadcast 2 > DHCP client bound to address 10.0.0.144 (1021 ms) > *** Warning: no boot file name; using '0A000090.img' > Using r8152#0 device > TFTP from server 0.0.0.0; our IP address is 10.0.0.144; sending > through gateway 10.0.0.1 > Filename '0A000090.img'. > Load address: 0x43e00000 > Loading: T > > Best Regards > -Anand Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: