linux-next: manual merge of the staging tree with the devicetree tree

linux-next: manual merge of the staging tree with the devicetree tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1682 bytes --]

Hi all,

Today's linux-next merge of the staging tree got a conflict in:

  Documentation/devicetree/bindings/iio/pressure/bmp085.txt

between commit:

  791d3ef2e111 ("dt-bindings: remove 'interrupt-parent' from bindings")

from the devicetree tree and commit:

  d2b863baf1c7 ("iio: pressure: bmp280: remove unused options from device tree documentation")

from the staging tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc Documentation/devicetree/bindings/iio/pressure/bmp085.txt
index 5498b0688b6f,abcab02504fb..000000000000
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
@@@ -8,10 -8,7 +8,6 @@@ Required properties
    "bosch,bme280"
  
  Optional properties:
- - chip-id: configurable chip id for non-default chip revisions
- - temp-measurement-period: temperature measurement period (milliseconds)
- - default-oversampling: default oversampling value to be used at startup,
-   value range is 0-3 with rising sensitivity.
 -- interrupt-parent: should be the phandle for the interrupt controller
  - interrupts: interrupt mapping for IRQ
  - reset-gpios: a GPIO line handling reset of the sensor: as the line is
    active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: linux-next: manual merge of the staging tree with the devicetree tree

[Greg KH]

On Fri, Jul 27, 2018 at 05:53:13PM +1000, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the staging tree got a conflict in:
> 
>   Documentation/devicetree/bindings/iio/pressure/bmp085.txt
> 
> between commit:
> 
>   791d3ef2e111 ("dt-bindings: remove 'interrupt-parent' from bindings")
> 
> from the devicetree tree and commit:
> 
>   d2b863baf1c7 ("iio: pressure: bmp280: remove unused options from device tree documentation")
> 
> from the staging tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc Documentation/devicetree/bindings/iio/pressure/bmp085.txt
> index 5498b0688b6f,abcab02504fb..000000000000
> --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
> +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt
> @@@ -8,10 -8,7 +8,6 @@@ Required properties
>     "bosch,bme280"
>   
>   Optional properties:
> - - chip-id: configurable chip id for non-default chip revisions
> - - temp-measurement-period: temperature measurement period (milliseconds)
> - - default-oversampling: default oversampling value to be used at startup,
> -   value range is 0-3 with rising sensitivity.
>  -- interrupt-parent: should be the phandle for the interrupt controller
>   - interrupts: interrupt mapping for IRQ
>   - reset-gpios: a GPIO line handling reset of the sensor: as the line is
>     active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)


Looks correct to me, thanks!

greg k-h

Re: linux-next: manual merge of the staging tree with the devicetree tree

[Greg KH]

On Tue, Oct 06, 2020 at 06:49:44PM +1100, Stephen Rothwell wrote:
> Hi all,
> 
> Today's linux-next merge of the staging tree got a conflict in:
> 
>   Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> 
> between commit:
> 
>   41fb845621ea ("dt-bindings: Another round of adding missing 'additionalProperties'")
> 
> from the devicetree tree and commit:
> 
>   3b17dd220432 ("dt-bindings: iio: adc: exynos-adc: require second interrupt with touch screen")
> 
> from the staging tree.
> 
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
> 
> -- 
> Cheers,
> Stephen Rothwell
> 
> diff --cc Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> index 16d76482b4ff,37d6591ff78c..000000000000
> --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
> @@@ -107,8 -109,15 +109,17 @@@ allOf
>             items:
>               - const: adc
>   
> +   - if:
> +       required:
> +         - has-touchscreen
> +     then:
> +       properties:
> +         interrupts:
> +           minItems: 2
> +           maxItems: 2
> + 
>  +additionalProperties: false
>  +
>   examples:
>     - |
>       adc: adc@12d10000 {

Looks good to me, thanks!

greg k-h

linux-next: manual merge of the staging tree with the devicetree tree

[Stephen Rothwell]

[-- Attachment #1: Type: text/plain, Size: 1449 bytes --]

Hi all,

Today's linux-next merge of the staging tree got a conflict in:

  Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml

between commit:

  41fb845621ea ("dt-bindings: Another round of adding missing 'additionalProperties'")

from the devicetree tree and commit:

  3b17dd220432 ("dt-bindings: iio: adc: exynos-adc: require second interrupt with touch screen")

from the staging tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
index 16d76482b4ff,37d6591ff78c..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml
@@@ -107,8 -109,15 +109,17 @@@ allOf
            items:
              - const: adc
  
+   - if:
+       required:
+         - has-touchscreen
+     then:
+       properties:
+         interrupts:
+           minItems: 2
+           maxItems: 2
+ 
 +additionalProperties: false
 +
  examples:
    - |
      adc: adc@12d10000 {

[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: linux-next: manual merge of the staging tree with the devicetree tree

[Jonathan Cameron]

On 20 January 2017 08:30:22 GMT+00:00, Greg KH <greg@kroah.com> wrote:
>On Thu, Jan 19, 2017 at 09:17:01PM -0600, Rob Herring wrote:
>> On Thu, Jan 19, 2017 at 8:55 PM, Stephen Rothwell
><sfr@canb.auug.org.au> wrote:
>> > Hi Greg,
>> >
>> > Today's linux-next merge of the staging tree got a conflict in:
>> >
>> >   Documentation/devicetree/bindings/vendor-prefixes.txt
>> >
>> > between commit:
>> >
>> >   566088d1d2a0 ("devicetree: Add Fujitsu Ltd. vendor prefix")
>> >
>> > from the devicetree tree and commit:
>> >
>> >   9b27c270d403 ("devicetree: add Garmin vendor prefix")
>> >
>> > from the staging tree.
>> >
>> > I fixed it up (see below) and can carry the fix as necessary. This
>> > is now fixed as far as linux-next is concerned, but any non trivial
>> > conflicts should be mentioned to your upstream maintainer when your
>tree
>> > is submitted for merging.  You may also want to consider
>cooperating
>> > with the maintainer of the conflicting tree to minimise any
>particularly
>> > complex conflicts.
>> >
>> > --
>> > Cheers,
>> > Stephen Rothwell
>> >
>> > diff --cc Documentation/devicetree/bindings/vendor-prefixes.txt
>> > index 14fd1c24e1f0,b34463b12382..000000000000
>> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
>> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
>> > @@@ -107,7 -108,7 +108,8 @@@ firefly    Firefl
>> >   focaltech     FocalTech Systems Co.,Ltd
>> >   friendlyarm   Guangzhou FriendlyARM Computer Tech Co., Ltd
>> >   fsl   Freescale Semiconductor
>> >  +fujitsu       Fujitsu Ltd.
>> > + grmn  Garmin Limited
>> 
>> Ugg. This didn't get sorted correctly when changed from garmin to
>grmn...
>
>Ick, sorry I missed that, I'll go queue up a patch to fix it in the
>staging tree.
>
>greg k-h

Me too. Thanks for sorting!

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.

Re: linux-next: manual merge of the staging tree with the devicetree tree

[Greg KH]

On Thu, Jan 19, 2017 at 09:17:01PM -0600, Rob Herring wrote:
> On Thu, Jan 19, 2017 at 8:55 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> > Hi Greg,
> >
> > Today's linux-next merge of the staging tree got a conflict in:
> >
> >   Documentation/devicetree/bindings/vendor-prefixes.txt
> >
> > between commit:
> >
> >   566088d1d2a0 ("devicetree: Add Fujitsu Ltd. vendor prefix")
> >
> > from the devicetree tree and commit:
> >
> >   9b27c270d403 ("devicetree: add Garmin vendor prefix")
> >
> > from the staging tree.
> >
> > I fixed it up (see below) and can carry the fix as necessary. This
> > is now fixed as far as linux-next is concerned, but any non trivial
> > conflicts should be mentioned to your upstream maintainer when your tree
> > is submitted for merging.  You may also want to consider cooperating
> > with the maintainer of the conflicting tree to minimise any particularly
> > complex conflicts.
> >
> > --
> > Cheers,
> > Stephen Rothwell
> >
> > diff --cc Documentation/devicetree/bindings/vendor-prefixes.txt
> > index 14fd1c24e1f0,b34463b12382..000000000000
> > --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> > +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> > @@@ -107,7 -108,7 +108,8 @@@ firefly    Firefl
> >   focaltech     FocalTech Systems Co.,Ltd
> >   friendlyarm   Guangzhou FriendlyARM Computer Tech Co., Ltd
> >   fsl   Freescale Semiconductor
> >  +fujitsu       Fujitsu Ltd.
> > + grmn  Garmin Limited
> 
> Ugg. This didn't get sorted correctly when changed from garmin to grmn...

Ick, sorry I missed that, I'll go queue up a patch to fix it in the
staging tree.

greg k-h

Re: linux-next: manual merge of the staging tree with the devicetree tree

[Rob Herring]

On Thu, Jan 19, 2017 at 8:55 PM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> Hi Greg,
>
> Today's linux-next merge of the staging tree got a conflict in:
>
>   Documentation/devicetree/bindings/vendor-prefixes.txt
>
> between commit:
>
>   566088d1d2a0 ("devicetree: Add Fujitsu Ltd. vendor prefix")
>
> from the devicetree tree and commit:
>
>   9b27c270d403 ("devicetree: add Garmin vendor prefix")
>
> from the staging tree.
>
> I fixed it up (see below) and can carry the fix as necessary. This
> is now fixed as far as linux-next is concerned, but any non trivial
> conflicts should be mentioned to your upstream maintainer when your tree
> is submitted for merging.  You may also want to consider cooperating
> with the maintainer of the conflicting tree to minimise any particularly
> complex conflicts.
>
> --
> Cheers,
> Stephen Rothwell
>
> diff --cc Documentation/devicetree/bindings/vendor-prefixes.txt
> index 14fd1c24e1f0,b34463b12382..000000000000
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@@ -107,7 -108,7 +108,8 @@@ firefly    Firefl
>   focaltech     FocalTech Systems Co.,Ltd
>   friendlyarm   Guangzhou FriendlyARM Computer Tech Co., Ltd
>   fsl   Freescale Semiconductor
>  +fujitsu       Fujitsu Ltd.
> + grmn  Garmin Limited

Ugg. This didn't get sorted correctly when changed from garmin to grmn...

>   ge    General Electric Company
>   geekbuying    GeekBuying
>   gef   GE Fanuc Intelligent Platforms Embedded Systems, Inc.

linux-next: manual merge of the staging tree with the devicetree tree

[Stephen Rothwell]

Hi Greg,

Today's linux-next merge of the staging tree got a conflict in:

  Documentation/devicetree/bindings/vendor-prefixes.txt

between commit:

  566088d1d2a0 ("devicetree: Add Fujitsu Ltd. vendor prefix")

from the devicetree tree and commit:

  9b27c270d403 ("devicetree: add Garmin vendor prefix")

from the staging tree.

I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging.  You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.

-- 
Cheers,
Stephen Rothwell

diff --cc Documentation/devicetree/bindings/vendor-prefixes.txt
index 14fd1c24e1f0,b34463b12382..000000000000
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@@ -107,7 -108,7 +108,8 @@@ firefly	Firefl
  focaltech	FocalTech Systems Co.,Ltd
  friendlyarm	Guangzhou FriendlyARM Computer Tech Co., Ltd
  fsl	Freescale Semiconductor
 +fujitsu	Fujitsu Ltd.
+ grmn	Garmin Limited
  ge	General Electric Company
  geekbuying	GeekBuying
  gef	GE Fanuc Intelligent Platforms Embedded Systems, Inc.