From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-3.0 required=3.0 tests=DKIM_SIGNED,DKIM_VALID, HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,SPF_PASS,T_DKIMWL_WL_MED, URIBL_BLOCKED,USER_AGENT_GIT autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 7D652C46470 for ; Wed, 8 Aug 2018 15:34:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 1D696208DA for ; Wed, 8 Aug 2018 15:34:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=bgdev-pl.20150623.gappssmtp.com header.i=@bgdev-pl.20150623.gappssmtp.com header.b="hp41/36S" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 1D696208DA Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=bgdev.pl Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-kernel-owner@vger.kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730672AbeHHRyi (ORCPT ); Wed, 8 Aug 2018 13:54:38 -0400 Received: from mail-wm0-f68.google.com ([74.125.82.68]:53344 "EHLO mail-wm0-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730543AbeHHRyh (ORCPT ); Wed, 8 Aug 2018 13:54:37 -0400 Received: by mail-wm0-f68.google.com with SMTP id s9-v6so3187513wmh.3 for ; Wed, 08 Aug 2018 08:34:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=zcgznE6S45cVW/uXU4633SP9xEXodj7KzWZ0OXtxtDk=; b=hp41/36Sz4I6u0BAoPv+5zcmevK1oBt8+72VIY5mpqFb1d8E5SyiqF0n+TQvluoGx5 ZBvrSbsC+/zMYtvp35XDQVxcjNkUiyi7zMB+kCfvL+R+vbRH99lP+ZojrJ1GLAxohb9n 1Q+XeZvvBGiAaCL9KyNprDvM247Q7FjoYwZK/SZs4P27IIYFQW07PA61KhpkKeYk1tqr jprIs4cBbtf7rx9v+WNk55rkVFgWwVR5IXf3bf0vZHF3s0UoOAWVY3I/t01ylLsDAF91 zdjb024MxCViihiWNqy6Ko7KWJOFK5Usc7GUlk4Ajjv4Xg5UDs7bGrG1xJSuVfX4HKEX 6Gjw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=zcgznE6S45cVW/uXU4633SP9xEXodj7KzWZ0OXtxtDk=; b=fxyorlQZPGYxvTpAqQoPEc0SMPpjDNj4VbLVSlVqvDjiWLUAnf7bHgIIy/z8vt9oS2 Fs6GTSKlPl3LHWxhllQ+wAEKbfpp7geq4pzKV+cZIkSRKbecMjvR4ZtG9RtCWemRI2Yz PaHVyftJoDl1QeGBCUDzmw2nYkfVhMXvMjQOQEmiDKvS+bDCl5QnsqldqhGURYBDgG5m rLLO+MPzTtqFtXt627PU1T7/Rqzbn/H+UBKXuPPqc0t1zgqPTcQMuQCohI4UBqO9fT4B to4XlgFA7iNQnVdOkoO8SEMPfwfmMjoRudT2wHeMIFtxsNmkiNBwgX93oEW+5NcEZYZJ J6dw== X-Gm-Message-State: AOUpUlHPFVoonXULgGTB6klKRaoculvQUM2C2iqQkM0I/IdCnsELRKrw ZKN2iPe14VXsALQuiFFzwc5sIw== X-Google-Smtp-Source: AA+uWPxLB52ys4SgAK5eYXVXXNnBWa/WBemSEpxtHR77QBXD+bjhZZRxO6B7g/dmrAM+5KRa19F+eA== X-Received: by 2002:a1c:e304:: with SMTP id a4-v6mr2241490wmh.0.1533742465354; Wed, 08 Aug 2018 08:34:25 -0700 (PDT) Received: from brgl-bgdev.lan (LFbn-MAR-1-609-89.w90-118.abo.wanadoo.fr. [90.118.185.89]) by smtp.gmail.com with ESMTPSA id s2-v6sm5240915wrw.52.2018.08.08.08.34.23 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 08 Aug 2018 08:34:24 -0700 (PDT) From: Bartosz Golaszewski To: Jonathan Corbet , Sekhar Nori , Kevin Hilman , Russell King , Arnd Bergmann , Greg Kroah-Hartman , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Grygorii Strashko , "David S . Miller" , Srinivas Kandagatla , Naren , Mauro Carvalho Chehab , Andrew Morton , Lukas Wunner , Dan Carpenter , Florian Fainelli , Ivan Khoronzhuk , Sven Van Asbroeck , Paolo Abeni , Alban Bedel , Rob Herring , David Lechner , Andrew Lunn Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, netdev@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH 28/28] eeprom: at24: kill at24_platform_data Date: Wed, 8 Aug 2018 17:31:50 +0200 Message-Id: <20180808153150.23444-29-brgl@bgdev.pl> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20180808153150.23444-1-brgl@bgdev.pl> References: <20180808153150.23444-1-brgl@bgdev.pl> Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org From: Bartosz Golaszewski There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 127 +++++++++++++---------------- include/linux/platform_data/at24.h | 60 -------------- 3 files changed, 57 insertions(+), 131 deletions(-) delete mode 100644 include/linux/platform_data/at24.h diff --git a/MAINTAINERS b/MAINTAINERS index 7cebd5bba8a8..8eb87a3548f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2328,7 +2328,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f5cc517d1131..93642b4b47c5 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -124,10 +138,6 @@ MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); usleep_range(1000, 1500), op_time = jiffies) struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -467,46 +477,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -523,13 +498,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -598,8 +569,9 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; + u32 byte_len, page_size, flags; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; struct at24_data *at24; @@ -613,35 +585,54 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); + if (err) + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "size", &byte_len); if (err) - return err; + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -654,11 +645,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -666,10 +657,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -712,7 +703,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -721,13 +712,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ -- 2.18.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartosz Golaszewski Subject: [PATCH 28/28] eeprom: at24: kill at24_platform_data Date: Wed, 8 Aug 2018 17:31:50 +0200 Message-ID: <20180808153150.23444-29-brgl@bgdev.pl> References: <20180808153150.23444-1-brgl@bgdev.pl> Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, netdev@vger.kernel.org, Bartosz Golaszewski To: Jonathan Corbet , Sekhar Nori , Kevin Hilman , Russell King , Arnd Bergmann , Greg Kroah-Hartman , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Grygorii Strashko , "David S . Miller" , Srinivas Kandagatla , Naren , Mauro Carvalho Chehab , Andrew Morton , Lukas Wunner , Dan Carpenter In-Reply-To: <20180808153150.23444-1-brgl@bgdev.pl> Sender: linux-kernel-owner@vger.kernel.org List-Id: netdev.vger.kernel.org From: Bartosz Golaszewski There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 127 +++++++++++++---------------- include/linux/platform_data/at24.h | 60 -------------- 3 files changed, 57 insertions(+), 131 deletions(-) delete mode 100644 include/linux/platform_data/at24.h diff --git a/MAINTAINERS b/MAINTAINERS index 7cebd5bba8a8..8eb87a3548f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2328,7 +2328,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f5cc517d1131..93642b4b47c5 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -124,10 +138,6 @@ MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); usleep_range(1000, 1500), op_time = jiffies) struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -467,46 +477,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -523,13 +498,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -598,8 +569,9 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; + u32 byte_len, page_size, flags; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; struct at24_data *at24; @@ -613,35 +585,54 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); + if (err) + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "size", &byte_len); if (err) - return err; + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -654,11 +645,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -666,10 +657,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -712,7 +703,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -721,13 +712,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ -- 2.18.0 From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bartosz Golaszewski Subject: [PATCH 28/28] eeprom: at24: kill at24_platform_data Date: Wed, 8 Aug 2018 17:31:50 +0200 Message-ID: <20180808153150.23444-29-brgl@bgdev.pl> References: <20180808153150.23444-1-brgl@bgdev.pl> Return-path: In-Reply-To: <20180808153150.23444-1-brgl@bgdev.pl> Sender: linux-kernel-owner@vger.kernel.org To: Jonathan Corbet , Sekhar Nori , Kevin Hilman , Russell King , Arnd Bergmann , Greg Kroah-Hartman , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Grygorii Strashko , "David S . Miller" , Srinivas Kandagatla , Naren , Mauro Carvalho Chehab , Andrew Morton , Lukas Wunner , Dan Carpenter Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, netdev@vger.kernel.org, Bartosz Golaszewski List-Id: linux-i2c@vger.kernel.org From: Bartosz Golaszewski There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 127 +++++++++++++---------------- include/linux/platform_data/at24.h | 60 -------------- 3 files changed, 57 insertions(+), 131 deletions(-) delete mode 100644 include/linux/platform_data/at24.h diff --git a/MAINTAINERS b/MAINTAINERS index 7cebd5bba8a8..8eb87a3548f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2328,7 +2328,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f5cc517d1131..93642b4b47c5 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -124,10 +138,6 @@ MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); usleep_range(1000, 1500), op_time = jiffies) struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -467,46 +477,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -523,13 +498,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -598,8 +569,9 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; + u32 byte_len, page_size, flags; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; struct at24_data *at24; @@ -613,35 +585,54 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); + if (err) + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "size", &byte_len); if (err) - return err; + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -654,11 +645,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -666,10 +657,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -712,7 +703,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -721,13 +712,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ -- 2.18.0 From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.1 (2015-04-28) on archive.lwn.net X-Spam-Level: X-Spam-Status: No, score=-5.9 required=5.0 tests=DKIM_SIGNED, HEADER_FROM_DIFFERENT_DOMAINS,MAILING_LIST_MULTI,RCVD_IN_DNSWL_HI, T_DKIM_INVALID autolearn=unavailable autolearn_force=no version=3.4.1 Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by archive.lwn.net (Postfix) with ESMTP id 968FA7E416 for ; Wed, 8 Aug 2018 15:34:36 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1730591AbeHHRyp (ORCPT ); Wed, 8 Aug 2018 13:54:45 -0400 Received: from mail-wm0-f65.google.com ([74.125.82.65]:53341 "EHLO mail-wm0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1730521AbeHHRyi (ORCPT ); Wed, 8 Aug 2018 13:54:38 -0400 Received: by mail-wm0-f65.google.com with SMTP id s9-v6so3187510wmh.3 for ; Wed, 08 Aug 2018 08:34:26 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=bgdev-pl.20150623.gappssmtp.com; s=20150623; h=from:to:cc:subject:date:message-id:in-reply-to:references; bh=zcgznE6S45cVW/uXU4633SP9xEXodj7KzWZ0OXtxtDk=; b=hp41/36Sz4I6u0BAoPv+5zcmevK1oBt8+72VIY5mpqFb1d8E5SyiqF0n+TQvluoGx5 ZBvrSbsC+/zMYtvp35XDQVxcjNkUiyi7zMB+kCfvL+R+vbRH99lP+ZojrJ1GLAxohb9n 1Q+XeZvvBGiAaCL9KyNprDvM247Q7FjoYwZK/SZs4P27IIYFQW07PA61KhpkKeYk1tqr jprIs4cBbtf7rx9v+WNk55rkVFgWwVR5IXf3bf0vZHF3s0UoOAWVY3I/t01ylLsDAF91 zdjb024MxCViihiWNqy6Ko7KWJOFK5Usc7GUlk4Ajjv4Xg5UDs7bGrG1xJSuVfX4HKEX 6Gjw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20161025; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references; bh=zcgznE6S45cVW/uXU4633SP9xEXodj7KzWZ0OXtxtDk=; b=te0MN+JqrJ/2iDVSH4nCeab9YpSSF0/xVZBWE2CHhF7o9Nzi00er0bseImlbRFFg0P X+pOx1tHOKbmfWXFM8iVwhugCsFR+0YF0tG/Uy1pYH0AWEHN1Kr202aAN7aJwEDUNCzU l6lrJpVxNQDSJHyouAAsUnUE5fAnyiHYlKlji3R5MQrbr3qezNErDofWGNeFGW3rNeBR BgcHV80DllPm4ms24styEBJeZzxclPk1WaAGEaTI+LbXs1dHzCeRINAk75+XfqUJ6D/r dCAlt+CPWN0WUeOlSmxdtzLMnIISamE6SZao8KofGgifcSrqGhFAzf0xtnvixL956Hrz zQug== X-Gm-Message-State: AOUpUlFLSEOCPKOVzPBZOtn/g/0IovblzSkzVMtiq+AfzWFMCvfJGLVe +49j8ndgBfUhQ6fxvpMBbQX7vA== X-Google-Smtp-Source: AA+uWPxLB52ys4SgAK5eYXVXXNnBWa/WBemSEpxtHR77QBXD+bjhZZRxO6B7g/dmrAM+5KRa19F+eA== X-Received: by 2002:a1c:e304:: with SMTP id a4-v6mr2241490wmh.0.1533742465354; Wed, 08 Aug 2018 08:34:25 -0700 (PDT) Received: from brgl-bgdev.lan (LFbn-MAR-1-609-89.w90-118.abo.wanadoo.fr. [90.118.185.89]) by smtp.gmail.com with ESMTPSA id s2-v6sm5240915wrw.52.2018.08.08.08.34.23 (version=TLS1_2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Wed, 08 Aug 2018 08:34:24 -0700 (PDT) From: Bartosz Golaszewski To: Jonathan Corbet , Sekhar Nori , Kevin Hilman , Russell King , Arnd Bergmann , Greg Kroah-Hartman , David Woodhouse , Brian Norris , Boris Brezillon , Marek Vasut , Richard Weinberger , Grygorii Strashko , "David S . Miller" , Srinivas Kandagatla , Naren , Mauro Carvalho Chehab , Andrew Morton , Lukas Wunner , Dan Carpenter , Florian Fainelli , Ivan Khoronzhuk , Sven Van Asbroeck , Paolo Abeni , Alban Bedel , Rob Herring , David Lechner , Andrew Lunn Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-i2c@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org, netdev@vger.kernel.org, Bartosz Golaszewski Subject: [PATCH 28/28] eeprom: at24: kill at24_platform_data Date: Wed, 8 Aug 2018 17:31:50 +0200 Message-Id: <20180808153150.23444-29-brgl@bgdev.pl> X-Mailer: git-send-email 2.18.0 In-Reply-To: <20180808153150.23444-1-brgl@bgdev.pl> References: <20180808153150.23444-1-brgl@bgdev.pl> Sender: linux-doc-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-doc@vger.kernel.org From: Bartosz Golaszewski There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 127 +++++++++++++---------------- include/linux/platform_data/at24.h | 60 -------------- 3 files changed, 57 insertions(+), 131 deletions(-) delete mode 100644 include/linux/platform_data/at24.h diff --git a/MAINTAINERS b/MAINTAINERS index 7cebd5bba8a8..8eb87a3548f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2328,7 +2328,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f5cc517d1131..93642b4b47c5 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -124,10 +138,6 @@ MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); usleep_range(1000, 1500), op_time = jiffies) struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -467,46 +477,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -523,13 +498,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -598,8 +569,9 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; + u32 byte_len, page_size, flags; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; struct at24_data *at24; @@ -613,35 +585,54 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); + if (err) + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "size", &byte_len); if (err) - return err; + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -654,11 +645,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -666,10 +657,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -712,7 +703,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -721,13 +712,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ -- 2.18.0 -- To unsubscribe from this list: send the line "unsubscribe linux-doc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html From mboxrd@z Thu Jan 1 00:00:00 1970 From: brgl@bgdev.pl (Bartosz Golaszewski) Date: Wed, 8 Aug 2018 17:31:50 +0200 Subject: [PATCH 28/28] eeprom: at24: kill at24_platform_data In-Reply-To: <20180808153150.23444-1-brgl@bgdev.pl> References: <20180808153150.23444-1-brgl@bgdev.pl> Message-ID: <20180808153150.23444-29-brgl@bgdev.pl> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Bartosz Golaszewski There are no more users of at24_platform_data. Remove the relevant header and modify the driver code to not use it anymore. Signed-off-by: Bartosz Golaszewski --- MAINTAINERS | 1 - drivers/misc/eeprom/at24.c | 127 +++++++++++++---------------- include/linux/platform_data/at24.h | 60 -------------- 3 files changed, 57 insertions(+), 131 deletions(-) delete mode 100644 include/linux/platform_data/at24.h diff --git a/MAINTAINERS b/MAINTAINERS index 7cebd5bba8a8..8eb87a3548f8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2328,7 +2328,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git S: Maintained F: Documentation/devicetree/bindings/eeprom/at24.txt F: drivers/misc/eeprom/at24.c -F: include/linux/platform_data/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f5cc517d1131..93642b4b47c5 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -22,10 +22,24 @@ #include #include #include -#include #include #include +/* Address pointer is 16 bit. */ +#define AT24_FLAG_ADDR16 BIT(7) +/* sysfs-entry will be read-only. */ +#define AT24_FLAG_READONLY BIT(6) +/* sysfs-entry will be world-readable. */ +#define AT24_FLAG_IRUGO BIT(5) +/* Take always 8 addresses (24c00). */ +#define AT24_FLAG_TAKE8ADDR BIT(4) +/* Factory-programmed serial number. */ +#define AT24_FLAG_SERIAL BIT(3) +/* Factory-programmed mac address. */ +#define AT24_FLAG_MAC BIT(2) +/* Does not auto-rollover reads to the next slave address. */ +#define AT24_FLAG_NO_RDROL BIT(1) + /* * I2C EEPROMs from most vendors are inexpensive and mostly interchangeable. * Differences between different vendor product lines (like Atmel AT24C or @@ -124,10 +138,6 @@ MODULE_PARM_DESC(at24_write_timeout, "Time (in ms) to try writes (default 25)"); usleep_range(1000, 1500), op_time = jiffies) struct at24_chip_data { - /* - * these fields mirror their equivalents in - * struct at24_platform_data - */ u32 byte_len; u8 flags; }; @@ -467,46 +477,11 @@ static int at24_write(void *priv, unsigned int off, void *val, size_t count) return 0; } -static void at24_properties_to_pdata(struct device *dev, - struct at24_platform_data *chip) -{ - int err; - u32 val; - - if (device_property_present(dev, "read-only")) - chip->flags |= AT24_FLAG_READONLY; - if (device_property_present(dev, "no-read-rollover")) - chip->flags |= AT24_FLAG_NO_RDROL; - - err = device_property_read_u32(dev, "size", &val); - if (!err) - chip->byte_len = val; - - err = device_property_read_u32(dev, "pagesize", &val); - if (!err) { - chip->page_size = val; - } else { - /* - * This is slow, but we can't know all eeproms, so we better - * play safe. Specifying custom eeprom-types via platform_data - * is recommended anyhow. - */ - chip->page_size = 1; - } -} - -static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) +static const struct at24_chip_data *at24_get_chip_data(struct device *dev) { struct device_node *of_node = dev->of_node; const struct at24_chip_data *cdata; const struct i2c_device_id *id; - struct at24_platform_data *pd; - - pd = dev_get_platdata(dev); - if (pd) { - memcpy(pdata, pd, sizeof(*pdata)); - return 0; - } id = i2c_match_id(at24_ids, to_i2c_client(dev)); @@ -523,13 +498,9 @@ static int at24_get_pdata(struct device *dev, struct at24_platform_data *pdata) cdata = acpi_device_get_match_data(dev); if (!cdata) - return -ENODEV; + return ERR_PTR(-ENODEV); - pdata->byte_len = cdata->byte_len; - pdata->flags = cdata->flags; - at24_properties_to_pdata(dev, pdata); - - return 0; + return cdata; } static void at24_remove_dummy_clients(struct at24_data *at24) @@ -598,8 +569,9 @@ static int at24_probe(struct i2c_client *client) { struct regmap_config regmap_config = { }; struct nvmem_config nvmem_config = { }; - struct at24_platform_data pdata = { }; + const struct at24_chip_data *cdata; struct device *dev = &client->dev; + u32 byte_len, page_size, flags; bool i2c_fn_i2c, i2c_fn_block; unsigned int i, num_addresses; struct at24_data *at24; @@ -613,35 +585,54 @@ static int at24_probe(struct i2c_client *client) i2c_fn_block = i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_I2C_BLOCK); - err = at24_get_pdata(dev, &pdata); + cdata = at24_get_chip_data(dev); + if (IS_ERR(cdata)) + return PTR_ERR(cdata); + + err = device_property_read_u32(dev, "pagesize", &page_size); + if (err) + /* + * This is slow, but we can't know all eeproms, so we better + * play safe. Specifying custom eeprom-types via platform_data + * is recommended anyhow. + */ + page_size = 1; + + flags = cdata->flags; + if (device_property_present(dev, "read-only")) + flags |= AT24_FLAG_READONLY; + if (device_property_present(dev, "no-read-rollover")) + flags |= AT24_FLAG_NO_RDROL; + + err = device_property_read_u32(dev, "size", &byte_len); if (err) - return err; + byte_len = cdata->byte_len; if (!i2c_fn_i2c && !i2c_fn_block) - pdata.page_size = 1; + page_size = 1; - if (!pdata.page_size) { + if (!page_size) { dev_err(dev, "page_size must not be 0!\n"); return -EINVAL; } - if (!is_power_of_2(pdata.page_size)) + if (!is_power_of_2(page_size)) dev_warn(dev, "page_size looks suspicious (no power of 2)!\n"); - if (pdata.flags & AT24_FLAG_TAKE8ADDR) + if (flags & AT24_FLAG_TAKE8ADDR) num_addresses = 8; else - num_addresses = DIV_ROUND_UP(pdata.byte_len, - (pdata.flags & AT24_FLAG_ADDR16) ? 65536 : 256); + num_addresses = DIV_ROUND_UP(byte_len, + (flags & AT24_FLAG_ADDR16) ? 65536 : 256); - if ((pdata.flags & AT24_FLAG_SERIAL) && (pdata.flags & AT24_FLAG_MAC)) { + if ((flags & AT24_FLAG_SERIAL) && (flags & AT24_FLAG_MAC)) { dev_err(dev, "invalid device data - cannot have both AT24_FLAG_SERIAL & AT24_FLAG_MAC."); return -EINVAL; } regmap_config.val_bits = 8; - regmap_config.reg_bits = (pdata.flags & AT24_FLAG_ADDR16) ? 16 : 8; + regmap_config.reg_bits = (flags & AT24_FLAG_ADDR16) ? 16 : 8; regmap_config.disable_locking = true; regmap = devm_regmap_init_i2c(client, ®map_config); @@ -654,11 +645,11 @@ static int at24_probe(struct i2c_client *client) return -ENOMEM; mutex_init(&at24->lock); - at24->byte_len = pdata.byte_len; - at24->page_size = pdata.page_size; - at24->flags = pdata.flags; + at24->byte_len = byte_len; + at24->page_size = page_size; + at24->flags = flags; at24->num_addresses = num_addresses; - at24->offset_adj = at24_get_offset_adj(pdata.flags, pdata.byte_len); + at24->offset_adj = at24_get_offset_adj(flags, byte_len); at24->client[0].client = client; at24->client[0].regmap = regmap; @@ -666,10 +657,10 @@ static int at24_probe(struct i2c_client *client) if (IS_ERR(at24->wp_gpio)) return PTR_ERR(at24->wp_gpio); - writable = !(pdata.flags & AT24_FLAG_READONLY); + writable = !(flags & AT24_FLAG_READONLY); if (writable) { at24->write_max = min_t(unsigned int, - pdata.page_size, at24_io_limit); + page_size, at24_io_limit); if (!i2c_fn_i2c && at24->write_max > I2C_SMBUS_BLOCK_MAX) at24->write_max = I2C_SMBUS_BLOCK_MAX; } @@ -712,7 +703,7 @@ static int at24_probe(struct i2c_client *client) nvmem_config.priv = at24; nvmem_config.stride = 1; nvmem_config.word_size = 1; - nvmem_config.size = pdata.byte_len; + nvmem_config.size = byte_len; at24->nvmem = devm_nvmem_register(dev, &nvmem_config); if (IS_ERR(at24->nvmem)) { @@ -721,13 +712,9 @@ static int at24_probe(struct i2c_client *client) } dev_info(dev, "%u byte %s EEPROM, %s, %u bytes/write\n", - pdata.byte_len, client->name, + byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); - /* export data to kernel code */ - if (pdata.setup) - pdata.setup(at24->nvmem, pdata.context); - return 0; err_clients: diff --git a/include/linux/platform_data/at24.h b/include/linux/platform_data/at24.h deleted file mode 100644 index 63507ff464ee..000000000000 --- a/include/linux/platform_data/at24.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * at24.h - platform_data for the at24 (generic eeprom) driver - * (C) Copyright 2008 by Pengutronix - * (C) Copyright 2012 by Wolfram Sang - * same license as the driver - */ - -#ifndef _LINUX_AT24_H -#define _LINUX_AT24_H - -#include -#include -#include - -/** - * struct at24_platform_data - data to set up at24 (generic eeprom) driver - * @byte_len: size of eeprom in byte - * @page_size: number of byte which can be written in one go - * @flags: tunable options, check AT24_FLAG_* defines - * @setup: an optional callback invoked after eeprom is probed; enables kernel - code to access eeprom via nvmem, see example - * @context: optional parameter passed to setup() - * - * If you set up a custom eeprom type, please double-check the parameters. - * Especially page_size needs extra care, as you risk data loss if your value - * is bigger than what the chip actually supports! - * - * An example in pseudo code for a setup() callback: - * - * void get_mac_addr(struct nvmem_device *nvmem, void *context) - * { - * u8 *mac_addr = ethernet_pdata->mac_addr; - * off_t offset = context; - * - * // Read MAC addr from EEPROM - * if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN) - * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr); - * } - * - * This function pointer and context can now be set up in at24_platform_data. - */ - -struct at24_platform_data { - u32 byte_len; /* size (sum of all addr) */ - u16 page_size; /* for writes */ - u8 flags; -#define AT24_FLAG_ADDR16 BIT(7) /* address pointer is 16 bit */ -#define AT24_FLAG_READONLY BIT(6) /* sysfs-entry will be read-only */ -#define AT24_FLAG_IRUGO BIT(5) /* sysfs-entry will be world-readable */ -#define AT24_FLAG_TAKE8ADDR BIT(4) /* take always 8 addresses (24c00) */ -#define AT24_FLAG_SERIAL BIT(3) /* factory-programmed serial number */ -#define AT24_FLAG_MAC BIT(2) /* factory-programmed mac address */ -#define AT24_FLAG_NO_RDROL BIT(1) /* does not auto-rollover reads to */ - /* the next slave address */ - - void (*setup)(struct nvmem_device *nvmem, void *context); - void *context; -}; - -#endif /* _LINUX_AT24_H */ -- 2.18.0