From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <andy.gross@linaro.org>,
David Brown <david.brown@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Rajendra Nayak <rnayak@codeaurora.org>,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Subject: [PATCH v2] clk: qcom: Add some missing gcc clks for msm8996
Date: Thu, 9 Aug 2018 15:01:19 -0700 [thread overview]
Message-ID: <20180809220119.18932-1-bjorn.andersson@linaro.org> (raw)
From: Rajendra Nayak <rnayak@codeaurora.org>
Add a few missing gcc clks for msm8996
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
[bjorn: omit aggre0_noc_qosgen_extref_clk]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
Changes since v1:
- Dropped LPASS SMMU clocks already introduced by Srinivas
drivers/clk/qcom/gcc-msm8996.c | 152 +++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8996.h | 9 ++
2 files changed, 161 insertions(+)
diff --git a/drivers/clk/qcom/gcc-msm8996.c b/drivers/clk/qcom/gcc-msm8996.c
index 9a3290fdd01b..9d136172c27c 100644
--- a/drivers/clk/qcom/gcc-msm8996.c
+++ b/drivers/clk/qcom/gcc-msm8996.c
@@ -260,6 +260,36 @@ static struct clk_alpha_pll_postdiv gpll0 = {
},
};
+static struct clk_branch gcc_mmss_gpll0_div_clk = {
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mmss_gpll0_div_clk",
+ .parent_names = (const char *[]){ "gpll0" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mss_gpll0_div_clk = {
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x5200c,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mss_gpll0_div_clk",
+ .parent_names = (const char *[]){ "gpll0" },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops
+ },
+ },
+};
+
static struct clk_alpha_pll gpll4_early = {
.offset = 0x77000,
.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
@@ -2951,6 +2981,20 @@ static struct clk_branch gcc_smmu_aggre0_ahb_clk = {
},
};
+static struct clk_branch gcc_aggre1_pnoc_ahb_clk = {
+ .halt_reg = 0x82014,
+ .clkr = {
+ .enable_reg = 0x82014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre1_pnoc_ahb_clk",
+ .parent_names = (const char *[]){ "periph_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_aggre2_ufs_axi_clk = {
.halt_reg = 0x83014,
.clkr = {
@@ -2981,6 +3025,34 @@ static struct clk_branch gcc_aggre2_usb3_axi_clk = {
},
};
+static struct clk_branch gcc_dcc_ahb_clk = {
+ .halt_reg = 0x84004,
+ .clkr = {
+ .enable_reg = 0x84004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_dcc_ahb_clk",
+ .parent_names = (const char *[]){ "config_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_aggre0_noc_mpu_cfg_ahb_clk = {
+ .halt_reg = 0x85000,
+ .clkr = {
+ .enable_reg = 0x85000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_aggre0_noc_mpu_cfg_ahb_clk",
+ .parent_names = (const char *[]){ "config_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_qspi_ahb_clk = {
.halt_reg = 0x8b004,
.clkr = {
@@ -3039,6 +3111,20 @@ static struct clk_branch gcc_hdmi_clkref_clk = {
},
};
+static struct clk_branch gcc_edp_clkref_clk = {
+ .halt_reg = 0x88004,
+ .clkr = {
+ .enable_reg = 0x88004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_edp_clkref_clk",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_clkref_clk = {
.halt_reg = 0x88008,
.clkr = {
@@ -3095,6 +3181,62 @@ static struct clk_branch gcc_rx1_usb2_clkref_clk = {
},
};
+static struct clk_branch gcc_mss_cfg_ahb_clk = {
+ .halt_reg = 0x8a000,
+ .clkr = {
+ .enable_reg = 0x8a000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mss_cfg_ahb_clk",
+ .parent_names = (const char *[]){ "config_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mss_mnoc_bimc_axi_clk = {
+ .halt_reg = 0x8a004,
+ .clkr = {
+ .enable_reg = 0x8a004,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mss_mnoc_bimc_axi_clk",
+ .parent_names = (const char *[]){ "system_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mss_snoc_axi_clk = {
+ .halt_reg = 0x8a024,
+ .clkr = {
+ .enable_reg = 0x8a024,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mss_snoc_axi_clk",
+ .parent_names = (const char *[]){ "system_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
+ .halt_reg = 0x8a028,
+ .clkr = {
+ .enable_reg = 0x8a028,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_mss_q6_bimc_axi_clk",
+ .parent_names = (const char *[]){ "system_noc_clk_src" },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_hw *gcc_msm8996_hws[] = {
&xo.hw,
&gpll0_early_div.hw,
@@ -3355,6 +3497,7 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
[GCC_AGGRE0_CNOC_AHB_CLK] = &gcc_aggre0_cnoc_ahb_clk.clkr,
[GCC_SMMU_AGGRE0_AXI_CLK] = &gcc_smmu_aggre0_axi_clk.clkr,
[GCC_SMMU_AGGRE0_AHB_CLK] = &gcc_smmu_aggre0_ahb_clk.clkr,
+ [GCC_AGGRE1_PNOC_AHB_CLK] = &gcc_aggre1_pnoc_ahb_clk.clkr,
[GCC_AGGRE2_UFS_AXI_CLK] = &gcc_aggre2_ufs_axi_clk.clkr,
[GCC_AGGRE2_USB3_AXI_CLK] = &gcc_aggre2_usb3_axi_clk.clkr,
[GCC_QSPI_AHB_CLK] = &gcc_qspi_ahb_clk.clkr,
@@ -3365,6 +3508,15 @@ static struct clk_regmap *gcc_msm8996_clocks[] = {
[GCC_PCIE_CLKREF_CLK] = &gcc_pcie_clkref_clk.clkr,
[GCC_RX2_USB2_CLKREF_CLK] = &gcc_rx2_usb2_clkref_clk.clkr,
[GCC_RX1_USB2_CLKREF_CLK] = &gcc_rx1_usb2_clkref_clk.clkr,
+ [GCC_EDP_CLKREF_CLK] = &gcc_edp_clkref_clk.clkr,
+ [GCC_MSS_CFG_AHB_CLK] = &gcc_mss_cfg_ahb_clk.clkr,
+ [GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr,
+ [GCC_MSS_SNOC_AXI_CLK] = &gcc_mss_snoc_axi_clk.clkr,
+ [GCC_MSS_MNOC_BIMC_AXI_CLK] = &gcc_mss_mnoc_bimc_axi_clk.clkr,
+ [GCC_DCC_AHB_CLK] = &gcc_dcc_ahb_clk.clkr,
+ [GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK] = &gcc_aggre0_noc_mpu_cfg_ahb_clk.clkr,
+ [GCC_MMSS_GPLL0_DIV_CLK] = &gcc_mmss_gpll0_div_clk.clkr,
+ [GCC_MSS_GPLL0_DIV_CLK] = &gcc_mss_gpll0_div_clk.clkr,
};
static struct gdsc *gcc_msm8996_gdscs[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8996.h b/include/dt-bindings/clock/qcom,gcc-msm8996.h
index 75b07cf5eed0..db80f2ee571b 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8996.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8996.h
@@ -235,6 +235,15 @@
#define GCC_RX1_USB2_CLKREF_CLK 218
#define GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK 219
#define GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK 220
+#define GCC_EDP_CLKREF_CLK 221
+#define GCC_MSS_CFG_AHB_CLK 222
+#define GCC_MSS_Q6_BIMC_AXI_CLK 223
+#define GCC_MSS_SNOC_AXI_CLK 224
+#define GCC_MSS_MNOC_BIMC_AXI_CLK 225
+#define GCC_DCC_AHB_CLK 226
+#define GCC_AGGRE0_NOC_MPU_CFG_AHB_CLK 227
+#define GCC_MMSS_GPLL0_DIV_CLK 228
+#define GCC_MSS_GPLL0_DIV_CLK 229
#define GCC_SYSTEM_NOC_BCR 0
#define GCC_CONFIG_NOC_BCR 1
--
2.18.0
next reply other threads:[~2018-08-09 22:01 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-09 22:01 Bjorn Andersson [this message]
2018-08-10 15:11 ` [PATCH v2] clk: qcom: Add some missing gcc clks for msm8996 Stephen Boyd
2018-08-10 15:11 ` Stephen Boyd
2018-08-13 18:43 ` Bjorn Andersson
2018-08-28 22:51 ` Stephen Boyd
2018-08-28 22:51 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180809220119.18932-1-bjorn.andersson@linaro.org \
--to=bjorn.andersson@linaro.org \
--cc=andy.gross@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=rnayak@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.