All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ondrej Mosnacek <omosnace@redhat.com>
To: linux-audit@redhat.com
Cc: Paul Moore <paul@paul-moore.com>,
	Richard Guy Briggs <rgb@redhat.com>,
	Steve Grubb <sgrubb@redhat.com>,
	Miroslav Lichvar <mlichvar@redhat.com>,
	John Stultz <john.stultz@linaro.org>,
	Thomas Gleixner <tglx@linutronix.de>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-kernel@vger.kernel.org,
	Ondrej Mosnacek <omosnace@redhat.com>
Subject: [PATCH ghak10 v5 2/2] timekeeping/ntp: Audit clock/NTP params adjustments
Date: Fri, 24 Aug 2018 14:00:01 +0200	[thread overview]
Message-ID: <20180824120001.20771-3-omosnace@redhat.com> (raw)
In-Reply-To: <20180824120001.20771-1-omosnace@redhat.com>

This patch adds logging of all attempts to either inject an offset into
the clock (producing an AUDIT_TIME_INJOFFSET record) or adjust an NTP
parameter (producing an AUDIT_TIME_ADJNTPVAL record).

For reference, running the following commands:

    auditctl -D
    auditctl -a exit,always -F arch=b64 -S adjtimex
    chronyd -q

produces audit records like this:

type=TIME_ADJNTPVAL msg=audit(1530616044.507:5): op=adjust old=0 new=0
type=SYSCALL msg=audit(1530616044.507:5): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78c00 a1=0 a2=4 a3=7f754ae28c0a items=0 ppid=626 pid=629 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.507:5): proctitle=6368726F6E7964002D71
type=SYSCALL msg=audit(1530616044.507:6): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78c00 a1=1 a2=1 a3=7f754ae28c0a items=0 ppid=626 pid=629 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.507:6): proctitle=6368726F6E7964002D71
type=TIME_INJOFFSET msg=audit(1530616044.507:7): sec=0 nsec=0
type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256
type=SYSCALL msg=audit(1530616044.507:7): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78c00 a1=1 a2=1 a3=7f754ae28c0a items=0 ppid=626 pid=629 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.507:7): proctitle=6368726F6E7964002D71
type=TIME_ADJNTPVAL msg=audit(1530616044.507:8): op=status old=8256 new=8257
type=TIME_ADJNTPVAL msg=audit(1530616044.507:8): op=offset old=0 new=0
type=TIME_ADJNTPVAL msg=audit(1530616044.507:8): op=freq old=0 new=0
type=SYSCALL msg=audit(1530616044.507:8): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78ab0 a1=0 a2=55e129c850c0 a3=7f754ae28c0a items=0 ppid=626 pid=629 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.507:8): proctitle=6368726F6E7964002D71
type=TIME_ADJNTPVAL msg=audit(1530616044.507:9): op=status old=8257 new=64
type=SYSCALL msg=audit(1530616044.507:9): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78ab0 a1=0 a2=55e129c850c0 a3=7f754ae28c0a items=0 ppid=626 pid=629 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.507:9): proctitle=6368726F6E7964002D71
type=SYSCALL msg=audit(1530616044.507:10): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78a70 a1=0 a2=55e129c850c0 a3=7f754ae28c0a items=0 ppid=626 pid=629 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.507:10): proctitle=6368726F6E7964002D71
type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000
type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=tick old=10000 new=10000
type=SYSCALL msg=audit(1530616044.511:11): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78ad0 a1=0 a2=2710 a3=f42f82a800000 items=0 ppid=626 pid=629 auid=0 uid=385 gid=382 euid=385 suid=385 fsuid=385 egid=382 sgid=382 fsgid=382 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.511:11): proctitle=6368726F6E7964002D71
type=TIME_ADJNTPVAL msg=audit(1530616044.521:12): op=status old=64 new=64
type=SYSCALL msg=audit(1530616044.521:12): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78b40 a1=1 a2=40 a3=f91f6ef84fbab items=0 ppid=626 pid=629 auid=0 uid=385 gid=382 euid=385 suid=385 fsuid=385 egid=382 sgid=382 fsgid=382 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616044.521:12): proctitle=6368726F6E7964002D71
type=TIME_INJOFFSET msg=audit(1530616049.652:13): sec=-16 nsec=124887145
type=TIME_ADJNTPVAL msg=audit(1530616049.652:13): op=status old=64 new=8256
type=SYSCALL msg=audit(1530616049.652:13): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78270 a1=1 a2=fffffffffffffff0 a3=137b828205ca12 items=0 ppid=626 pid=629 auid=0 uid=385 gid=382 euid=385 suid=385 fsuid=385 egid=382 sgid=382 fsgid=382 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616049.652:13): proctitle=6368726F6E7964002D71
type=TIME_ADJNTPVAL msg=audit(1530616033.783:14): op=freq old=49180377088000 new=49180377088000
type=TIME_ADJNTPVAL msg=audit(1530616033.783:14): op=tick old=10000 new=10000
type=SYSCALL msg=audit(1530616033.783:14): arch=c000003e syscall=159 success=yes exit=5 a0=7fff57e78bc0 a1=0 a2=2710 a3=0 items=0 ppid=626 pid=629 auid=0 uid=385 gid=382 euid=385 suid=385 fsuid=385 egid=382 sgid=382 fsgid=382 tty=(none) ses=1 comm="chronyd" exe="/usr/sbin/chronyd" subj=system_u:system_r:kernel_t:s0 key=(null)
type=PROCTITLE msg=audit(1530616033.783:14): proctitle=6368726F6E7964002D71

The chronyd command that produced the above records executed the
following adjtimex(2) syscalls (as per strace output):

adjtimex({modes=ADJ_OFFSET|0x8000, offset=0, freq=0, maxerror=16000000, esterror=16000000, status=STA_UNSYNC, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=507215}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_MAXERROR, offset=0, freq=0, maxerror=0, esterror=16000000, status=STA_UNSYNC, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=507438}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_SETOFFSET|ADJ_NANO, offset=0, freq=0, maxerror=16000000, esterror=16000000, status=STA_UNSYNC|STA_NANO, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=507604737}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_OFFSET|ADJ_STATUS, offset=0, freq=0, maxerror=16000000, esterror=16000000, status=STA_PLL|STA_UNSYNC|STA_NANO, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=507698330}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_STATUS, offset=0, freq=0, maxerror=16000000, esterror=16000000, status=STA_UNSYNC, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=507792}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=0, offset=0, freq=0, maxerror=16000000, esterror=16000000, status=STA_UNSYNC, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=508000}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_FREQUENCY|ADJ_TICK, offset=0, freq=750433, maxerror=16000000, esterror=16000000, status=STA_UNSYNC, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=512146}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_MAXERROR|ADJ_ESTERROR|ADJ_STATUS, offset=0, freq=750433, maxerror=16000000, esterror=16000000, status=STA_UNSYNC, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616044, tv_usec=522506}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_SETOFFSET|ADJ_NANO, offset=0, freq=750433, maxerror=16000000, esterror=16000000, status=STA_UNSYNC|STA_NANO, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616033, tv_usec=778717675}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)
adjtimex({modes=ADJ_FREQUENCY|ADJ_TICK, offset=0, freq=750433, maxerror=16000000, esterror=16000000, status=STA_UNSYNC|STA_NANO, constant=2, precision=1, tolerance=32768000, time={tv_sec=1530616033, tv_usec=784644657}, tick=10000, ppsfreq=0, jitter=0, shift=0, stabil=0, jitcnt=0, calcnt=0, errcnt=0, stbcnt=0, tai=0}) = 5 (TIME_ERROR)

(The struct timex fields above are from *after* the syscall was
executed, so they contain the current (new) values as set from the
kernel, except of the 'modes' field, which contains the original value
sent by the caller.)

The changes to the time_maxerror, time_esterror, and time_constant
variables are not logged, as these are not important for security.

Note that the records are emitted even when the actual value does not
change (i.e. when there is an explicit attempt to change a value, but
the new value equals the old one).

An overview of changes that can be done via adjtimex(2) (based on
information from Miroslav Lichvar) and whether they are audited:
  timekeeping_inject_offset() -- injects offset directly into system
                                 time (AUDITED)
  __timekeeping_set_tai_offset() -- sets the offset from the
                                    International Atomic Time
                                    (AUDITED)
  NTP variables:
    time_offset -- can adjust the clock by up to 0.5 seconds per call
                   and also speed it up or slow down by up to about
                   0.05% (43 seconds per day) (AUDITED)
    time_freq -- can speed up or slow down by up to about 0.05%
    time_status -- can insert/delete leap seconds and it also enables/
                   disables synchronization of the hardware real-time
                   clock (AUDITED)
    time_maxerror, time_esterror -- change error estimates used to
                                    inform userspace applications
                                    (NOT AUDITED)
    time_constant -- controls the speed of the clock adjustments that
                     are made when time_offset is set (NOT AUDITED)
    time_adjust -- can temporarily speed up or slow down the clock by up
                   to 0.05% (AUDITED)
    tick_usec -- a more extreme version of time_freq; can speed up or
                 slow down the clock by up to 10% (AUDITED)

Cc: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
---
 kernel/time/ntp.c         | 38 ++++++++++++++++++++++++++++++--------
 kernel/time/timekeeping.c |  3 +++
 2 files changed, 33 insertions(+), 8 deletions(-)

diff --git a/kernel/time/ntp.c b/kernel/time/ntp.c
index a09ded765f6c..f96c6d326aae 100644
--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/rtc.h>
 #include <linux/math64.h>
+#include <linux/audit.h>
 
 #include "ntp_internal.h"
 #include "timekeeping_internal.h"
@@ -294,6 +295,8 @@ static inline s64 ntp_update_offset_fll(s64 offset64, long secs)
 
 static void ntp_update_offset(long offset)
 {
+	s64 old_offset = time_offset;
+	s64 old_freq = time_freq;
 	s64 freq_adj;
 	s64 offset64;
 	long secs;
@@ -342,6 +345,9 @@ static void ntp_update_offset(long offset)
 	time_freq   = max(freq_adj, -MAXFREQ_SCALED);
 
 	time_offset = div_s64(offset64 << NTP_SCALE_SHIFT, NTP_INTERVAL_FREQ);
+
+	audit_ntp_adjust("offset", old_offset, time_offset);
+	audit_ntp_adjust("freq", old_freq, time_freq);
 }
 
 /**
@@ -669,21 +675,31 @@ static inline void process_adjtimex_modes(struct timex *txc,
 						struct timespec64 *ts,
 						s32 *time_tai)
 {
-	if (txc->modes & ADJ_STATUS)
-		process_adj_status(txc, ts);
+	if (txc->modes & (ADJ_STATUS | ADJ_NANO | ADJ_MICRO)) {
+		int old_status = time_status;
+
+		if (txc->modes & ADJ_STATUS)
+			process_adj_status(txc, ts);
 
-	if (txc->modes & ADJ_NANO)
-		time_status |= STA_NANO;
+		if (txc->modes & ADJ_NANO)
+			time_status |= STA_NANO;
 
-	if (txc->modes & ADJ_MICRO)
-		time_status &= ~STA_NANO;
+		if (txc->modes & ADJ_MICRO)
+			time_status &= ~STA_NANO;
+
+		audit_ntp_adjust("status", old_status, time_status);
+	}
 
 	if (txc->modes & ADJ_FREQUENCY) {
+		s64 old_freq = time_freq;
+
 		time_freq = txc->freq * PPM_SCALE;
 		time_freq = min(time_freq, MAXFREQ_SCALED);
 		time_freq = max(time_freq, -MAXFREQ_SCALED);
 		/* update pps_freq */
 		pps_set_freq(time_freq);
+
+		audit_ntp_adjust("freq", old_freq, time_freq);
 	}
 
 	if (txc->modes & ADJ_MAXERROR)
@@ -700,14 +716,18 @@ static inline void process_adjtimex_modes(struct timex *txc,
 		time_constant = max(time_constant, 0l);
 	}
 
-	if (txc->modes & ADJ_TAI && txc->constant > 0)
+	if (txc->modes & ADJ_TAI && txc->constant > 0) {
+		audit_ntp_adjust("tai", *time_tai, txc->constant);
 		*time_tai = txc->constant;
+	}
 
 	if (txc->modes & ADJ_OFFSET)
 		ntp_update_offset(txc->offset);
 
-	if (txc->modes & ADJ_TICK)
+	if (txc->modes & ADJ_TICK) {
+		audit_ntp_adjust("tick", tick_usec, txc->tick);
 		tick_usec = txc->tick;
+	}
 
 	if (txc->modes & (ADJ_TICK|ADJ_FREQUENCY|ADJ_OFFSET))
 		ntp_update_frequency();
@@ -729,6 +749,8 @@ int __do_adjtimex(struct timex *txc, struct timespec64 *ts, s32 *time_tai)
 			/* adjtime() is independent from ntp_adjtime() */
 			time_adjust = txc->offset;
 			ntp_update_frequency();
+
+			audit_ntp_adjust("adjust", save_adjust, txc->offset);
 		}
 		txc->offset = save_adjust;
 	} else {
diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c
index 4786df904c22..9089ac329e69 100644
--- a/kernel/time/timekeeping.c
+++ b/kernel/time/timekeeping.c
@@ -25,6 +25,7 @@
 #include <linux/stop_machine.h>
 #include <linux/pvclock_gtod.h>
 #include <linux/compiler.h>
+#include <linux/audit.h>
 
 #include "tick-internal.h"
 #include "ntp_internal.h"
@@ -2308,6 +2309,8 @@ int do_adjtimex(struct timex *txc)
 		ret = timekeeping_inject_offset(&delta);
 		if (ret)
 			return ret;
+
+		audit_tk_injoffset(delta);
 	}
 
 	getnstimeofday64(&ts);
-- 
2.17.1


  parent reply	other threads:[~2018-08-24 12:00 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-24 11:59 [PATCH ghak10 v5 0/2] audit: Log modifying adjtimex(2) calls Ondrej Mosnacek
2018-08-24 12:00 ` [PATCH ghak10 v5 1/2] audit: Add functions to log time adjustments Ondrej Mosnacek
2018-08-24 18:33   ` John Stultz
2018-08-27  8:28     ` Ondrej Mosnacek
2018-09-13 15:54       ` Richard Guy Briggs
2018-09-17 12:33         ` Ondrej Mosnacek
2018-08-27  7:50   ` Miroslav Lichvar
2018-08-27  9:13     ` Ondrej Mosnacek
2018-08-27 16:38       ` Steve Grubb
2018-08-27 16:38         ` Steve Grubb
2018-09-13 13:59         ` Ondrej Mosnacek
2018-09-13 15:14           ` Richard Guy Briggs
2018-09-17 12:32             ` Ondrej Mosnacek
2018-09-14  3:09           ` Paul Moore
2018-09-17 12:33             ` Ondrej Mosnacek
2018-09-14  3:18   ` Paul Moore
2018-09-14 15:16     ` Richard Guy Briggs
2018-09-14 15:34       ` Steve Grubb
2018-09-14 16:24         ` Richard Guy Briggs
2018-09-17 14:36       ` Paul Moore
2018-09-17 12:38     ` Ondrej Mosnacek
2018-09-17 14:20       ` Richard Guy Briggs
2018-09-17 14:50       ` Paul Moore
2018-09-21 11:21         ` Ondrej Mosnacek
2018-09-22 20:42           ` Paul Moore
2018-09-22 20:42             ` Paul Moore
2018-08-24 12:00 ` Ondrej Mosnacek [this message]
2018-08-24 19:47   ` [PATCH ghak10 v5 2/2] timekeeping/ntp: Audit clock/NTP params adjustments Richard Guy Briggs
2018-08-24 20:20     ` John Stultz
2018-08-24 20:20       ` John Stultz
2018-08-27 11:35     ` Ondrej Mosnacek
2018-08-27 11:45       ` Miroslav Lichvar
2018-08-27 12:02         ` Ondrej Mosnacek
2018-08-27 21:42         ` Thomas Gleixner
2018-09-13 15:35       ` Richard Guy Briggs

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180824120001.20771-3-omosnace@redhat.com \
    --to=omosnace@redhat.com \
    --cc=john.stultz@linaro.org \
    --cc=linux-audit@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mlichvar@redhat.com \
    --cc=paul@paul-moore.com \
    --cc=rgb@redhat.com \
    --cc=sboyd@kernel.org \
    --cc=sgrubb@redhat.com \
    --cc=tglx@linutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.