From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dmitry Osipenko Subject: [PATCH v1 2/2] ARM: tegra: Switch CPU to PLLP on resume from LP1 on Tegra30 Date: Thu, 30 Aug 2018 22:04:54 +0300 Message-ID: <20180830190454.8729-3-digetx@gmail.com> References: <20180830190454.8729-1-digetx@gmail.com> Return-path: In-Reply-To: <20180830190454.8729-1-digetx@gmail.com> Sender: linux-kernel-owner@vger.kernel.org To: Thierry Reding , Jonathan Hunter , Peter De Schrijver Cc: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: linux-tegra@vger.kernel.org The early-resume code shall not switch CPU to PLLX because PLLX configuration could be unstable or PLLX could be even disabled if CPU entered suspend on PLLP, it the case if CPUFREQ driver is active. The actual PLLX configuration and burst policy shall be restored by the clock driver. Signed-off-by: Dmitry Osipenko --- arch/arm/mach-tegra/sleep-tegra30.S | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-tegra/sleep-tegra30.S b/arch/arm/mach-tegra/sleep-tegra30.S index d572d4b860be..127fc78365fe 100644 --- a/arch/arm/mach-tegra/sleep-tegra30.S +++ b/arch/arm/mach-tegra/sleep-tegra30.S @@ -396,8 +396,8 @@ _pll_m_c_x_done: str r4, [r0, #CLK_RESET_SCLK_BURST] cmp r10, #TEGRA30 - movweq r4, #:lower16:((1 << 28) | (0x8)) @ burst policy is PLLX - movteq r4, #:upper16:((1 << 28) | (0x8)) + movweq r4, #:lower16:((1 << 28) | (0x4)) @ burst policy is PLLP + movteq r4, #:upper16:((1 << 28) | (0x4)) movwne r4, #:lower16:((1 << 28) | (0xe)) movtne r4, #:upper16:((1 << 28) | (0xe)) str r4, [r0, #CLK_RESET_CCLK_BURST] -- 2.18.0