[PATCH] HID: i2c-hid: enforce I2C_HID_QUIRK_RESEND_REPORT_DESCR

[Benjamin Tissoires <benjamin.tissoires@redhat.com>]

The spec states that the HID devices should allow
the host to query the HID descriptor at any time.

Some devices require the HID descriptor to be set
on resume, or they will fail.

Instead of having a growing list of blacklisted devices
make the call part of the general resume process
so we can remove this list.

Tested on a Dell XPS 9360 and a Surface 3.

link: https://bugzilla.redhat.com/show_bug.cgi?id=1622695

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
 drivers/hid/i2c-hid/i2c-hid.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)

diff --git a/drivers/hid/i2c-hid/i2c-hid.c b/drivers/hid/i2c-hid/i2c-hid.c
index 57126f6837bb..17ec57c62a0b 100644
--- a/drivers/hid/i2c-hid/i2c-hid.c
+++ b/drivers/hid/i2c-hid/i2c-hid.c
@@ -47,7 +47,7 @@
 /* quirks to control the device */
 #define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV	BIT(0)
 #define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET	BIT(1)
-#define I2C_HID_QUIRK_RESEND_REPORT_DESCR	BIT(2)
+/* reserved: I2C_HID_QUIRK_RESEND_REPORT_DESCR	BIT(2) */
 
 /* flags */
 #define I2C_HID_STARTED		0
@@ -170,12 +170,6 @@ static const struct i2c_hid_quirks {
 		I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
 	{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
 		I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
-	{ I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_3118,
-		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
-	{ USB_VENDOR_ID_SIS_TOUCH, USB_DEVICE_ID_SIS10FB_TOUCH,
-		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
-	{ I2C_VENDOR_ID_RAYD, I2C_PRODUCT_ID_RAYD_4B33,
-		I2C_HID_QUIRK_RESEND_REPORT_DESCR },
 	{ 0, 0 }
 };
 
@@ -1245,11 +1239,9 @@ static int i2c_hid_resume(struct device *dev)
 	 * after resume, after this it will be back normal.
 	 * otherwise it issues too many incomplete reports.
 	 */
-	if (ihid->quirks & I2C_HID_QUIRK_RESEND_REPORT_DESCR) {
-		ret = i2c_hid_command(client, &hid_report_descr_cmd, NULL, 0);
-		if (ret)
-			return ret;
-	}
+	ret = i2c_hid_command(client, &hid_report_descr_cmd, NULL, 0);
+	if (ret)
+		return ret;
 
 	if (hid->driver && hid->driver->reset_resume) {
 		ret = hid->driver->reset_resume(hid);
-- 
2.14.3