All of lore.kernel.org
 help / color / mirror / Atom feed
From: Georgi Djakov <georgi.djakov@linaro.org>
To: linux-pm@vger.kernel.org, gregkh@linuxfoundation.org
Cc: rjw@rjwysocki.net, robh+dt@kernel.org, mturquette@baylibre.com,
	khilman@baylibre.com, vincent.guittot@linaro.org,
	skannan@codeaurora.org, bjorn.andersson@linaro.org,
	amit.kucheria@linaro.org, seansw@qti.qualcomm.com,
	daidavid1@codeaurora.org, evgreen@chromium.org,
	mark.rutland@arm.com, lorenzo.pieralisi@arm.com,
	abailon@baylibre.com, maxime.ripard@bootlin.com, arnd@arndb.de,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, georgi.djakov@linaro.org
Subject: [PATCH v9 5/8] interconnect: qcom: Add RPM communication
Date: Fri, 31 Aug 2018 17:01:48 +0300	[thread overview]
Message-ID: <20180831140151.13972-6-georgi.djakov@linaro.org> (raw)
In-Reply-To: <20180831140151.13972-1-georgi.djakov@linaro.org>

On some Qualcomm SoCs, there is a remote processor, which controls some of
the Network-On-Chip interconnect resources. Other CPUs express their needs
by communicating with this processor. Add a driver to handle communication
with this remote processor.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/interconnect/qcom-smd.txt        | 32 +++++++
 drivers/interconnect/qcom/Kconfig             | 13 +++
 drivers/interconnect/qcom/Makefile            |  5 +
 drivers/interconnect/qcom/smd-rpm.c           | 91 +++++++++++++++++++
 drivers/interconnect/qcom/smd-rpm.h           | 15 +++
 5 files changed, 156 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom-smd.txt
 create mode 100644 drivers/interconnect/qcom/Kconfig
 create mode 100644 drivers/interconnect/qcom/Makefile
 create mode 100644 drivers/interconnect/qcom/smd-rpm.c
 create mode 100644 drivers/interconnect/qcom/smd-rpm.h

diff --git a/Documentation/devicetree/bindings/interconnect/qcom-smd.txt b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
new file mode 100644
index 000000000000..2325167f6eaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
@@ -0,0 +1,32 @@
+Qualcomm SMD-RPM interconnect driver binding
+------------------------------------------------
+The RPM (Resource Power Manager) is a dedicated hardware engine
+for managing the shared SoC resources in order to keep the lowest
+power profile. It communicates with other hardware subsystems via
+the shared memory driver (SMD) back-end and accepts requests for
+various resources.
+
+Required properties :
+- compatible : shall contain only one of the following:
+			"qcom,interconnect-smd-rpm"
+
+Example:
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				interconnect-smd-rpm {
+					compatible = "qcom,interconnect-smd-rpm";
+				};
+
+			};
+		};
+	};
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
new file mode 100644
index 000000000000..6146552fac86
--- /dev/null
+++ b/drivers/interconnect/qcom/Kconfig
@@ -0,0 +1,13 @@
+config INTERCONNECT_QCOM
+	bool "Qualcomm Network-on-Chip interconnect drivers"
+	depends on ARCH_QCOM
+	help
+	  Support for Qualcomm's Network-on-Chip interconnect hardware.
+
+config INTERCONNECT_QCOM_SMD_RPM
+	tristate "Qualcomm SMD RPM interconnect driver"
+	depends on INTERCONNECT_QCOM
+	depends on QCOM_SMD_RPM
+	help
+	  This is a driver for communicating interconnect related configuration
+	  details with a remote processor (RPM) on Qualcomm platforms.
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
new file mode 100644
index 000000000000..f4477ad22ba2
--- /dev/null
+++ b/drivers/interconnect/qcom/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+qnoc-smd-rpm-objs			:= smd-rpm.o
+
+obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += qnoc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
new file mode 100644
index 000000000000..48b7a2a6eb84
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RPM over SMD communication wrapper for interconnects
+ *
+ * Copyright (C) 2018 Linaro Ltd
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+#include "smd-rpm.h"
+
+#define	RPM_KEY_BW	0x00007762
+
+static struct qcom_icc_rpm {
+	struct qcom_smd_rpm *rpm;
+} icc_rpm_smd;
+
+struct icc_rpm_smd_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+bool qcom_icc_rpm_smd_available(void)
+{
+	if (!icc_rpm_smd.rpm)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available);
+
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
+{
+	struct icc_rpm_smd_req req = {
+		.key = cpu_to_le32(RPM_KEY_BW),
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(val),
+	};
+
+	return qcom_rpm_smd_write(icc_rpm_smd.rpm, ctx, rsc_type, id, &req,
+				  sizeof(req));
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
+
+static int qcom_icc_rpm_smd_probe(struct platform_device *pdev)
+{
+	icc_rpm_smd.rpm = dev_get_drvdata(pdev->dev.parent);
+	if (!icc_rpm_smd.rpm) {
+		dev_err(&pdev->dev, "unable to retrieve handle to RPM\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id qcom_icc_rpm_smd_dt_match[] = {
+	{ .compatible = "qcom,interconnect-smd-rpm", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, qcom_icc_rpm_smd_dt_match);
+
+static struct platform_driver qcom_interconnect_rpm_smd_driver = {
+	.driver = {
+		.name		= "qcom-interconnect-smd-rpm",
+		.of_match_table	= qcom_icc_rpm_smd_dt_match,
+	},
+	.probe = qcom_icc_rpm_smd_probe,
+};
+
+static int __init rpm_smd_interconnect_init(void)
+{
+	return platform_driver_register(&qcom_interconnect_rpm_smd_driver);
+}
+subsys_initcall(rpm_smd_interconnect_init);
+
+static void __exit rpm_smd_interconnect_exit(void)
+{
+	platform_driver_unregister(&qcom_interconnect_rpm_smd_driver);
+}
+module_exit(rpm_smd_interconnect_exit)
+
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
new file mode 100644
index 000000000000..11c280eb86dc
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+
+#include <linux/soc/qcom/smd-rpm.h>
+
+bool qcom_icc_rpm_smd_available(void);
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
+
+#endif

WARNING: multiple messages have this Message-ID
From: georgi.djakov@linaro.org (Georgi Djakov)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v9 5/8] interconnect: qcom: Add RPM communication
Date: Fri, 31 Aug 2018 17:01:48 +0300	[thread overview]
Message-ID: <20180831140151.13972-6-georgi.djakov@linaro.org> (raw)
In-Reply-To: <20180831140151.13972-1-georgi.djakov@linaro.org>

On some Qualcomm SoCs, there is a remote processor, which controls some of
the Network-On-Chip interconnect resources. Other CPUs express their needs
by communicating with this processor. Add a driver to handle communication
with this remote processor.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
---
 .../bindings/interconnect/qcom-smd.txt        | 32 +++++++
 drivers/interconnect/qcom/Kconfig             | 13 +++
 drivers/interconnect/qcom/Makefile            |  5 +
 drivers/interconnect/qcom/smd-rpm.c           | 91 +++++++++++++++++++
 drivers/interconnect/qcom/smd-rpm.h           | 15 +++
 5 files changed, 156 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interconnect/qcom-smd.txt
 create mode 100644 drivers/interconnect/qcom/Kconfig
 create mode 100644 drivers/interconnect/qcom/Makefile
 create mode 100644 drivers/interconnect/qcom/smd-rpm.c
 create mode 100644 drivers/interconnect/qcom/smd-rpm.h

diff --git a/Documentation/devicetree/bindings/interconnect/qcom-smd.txt b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
new file mode 100644
index 000000000000..2325167f6eaf
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/qcom-smd.txt
@@ -0,0 +1,32 @@
+Qualcomm SMD-RPM interconnect driver binding
+------------------------------------------------
+The RPM (Resource Power Manager) is a dedicated hardware engine
+for managing the shared SoC resources in order to keep the lowest
+power profile. It communicates with other hardware subsystems via
+the shared memory driver (SMD) back-end and accepts requests for
+various resources.
+
+Required properties :
+- compatible : shall contain only one of the following:
+			"qcom,interconnect-smd-rpm"
+
+Example:
+	smd {
+		compatible = "qcom,smd";
+
+		rpm {
+			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+			qcom,ipc = <&apcs 8 0>;
+			qcom,smd-edge = <15>;
+
+			rpm_requests {
+				compatible = "qcom,rpm-msm8916";
+				qcom,smd-channels = "rpm_requests";
+
+				interconnect-smd-rpm {
+					compatible = "qcom,interconnect-smd-rpm";
+				};
+
+			};
+		};
+	};
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
new file mode 100644
index 000000000000..6146552fac86
--- /dev/null
+++ b/drivers/interconnect/qcom/Kconfig
@@ -0,0 +1,13 @@
+config INTERCONNECT_QCOM
+	bool "Qualcomm Network-on-Chip interconnect drivers"
+	depends on ARCH_QCOM
+	help
+	  Support for Qualcomm's Network-on-Chip interconnect hardware.
+
+config INTERCONNECT_QCOM_SMD_RPM
+	tristate "Qualcomm SMD RPM interconnect driver"
+	depends on INTERCONNECT_QCOM
+	depends on QCOM_SMD_RPM
+	help
+	  This is a driver for communicating interconnect related configuration
+	  details with a remote processor (RPM) on Qualcomm platforms.
diff --git a/drivers/interconnect/qcom/Makefile b/drivers/interconnect/qcom/Makefile
new file mode 100644
index 000000000000..f4477ad22ba2
--- /dev/null
+++ b/drivers/interconnect/qcom/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+qnoc-smd-rpm-objs			:= smd-rpm.o
+
+obj-$(CONFIG_INTERCONNECT_QCOM_SMD_RPM) += qnoc-smd-rpm.o
diff --git a/drivers/interconnect/qcom/smd-rpm.c b/drivers/interconnect/qcom/smd-rpm.c
new file mode 100644
index 000000000000..48b7a2a6eb84
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * RPM over SMD communication wrapper for interconnects
+ *
+ * Copyright (C) 2018 Linaro Ltd
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#include <linux/interconnect-provider.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/soc/qcom/smd-rpm.h>
+#include "smd-rpm.h"
+
+#define	RPM_KEY_BW	0x00007762
+
+static struct qcom_icc_rpm {
+	struct qcom_smd_rpm *rpm;
+} icc_rpm_smd;
+
+struct icc_rpm_smd_req {
+	__le32 key;
+	__le32 nbytes;
+	__le32 value;
+};
+
+bool qcom_icc_rpm_smd_available(void)
+{
+	if (!icc_rpm_smd.rpm)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_available);
+
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val)
+{
+	struct icc_rpm_smd_req req = {
+		.key = cpu_to_le32(RPM_KEY_BW),
+		.nbytes = cpu_to_le32(sizeof(u32)),
+		.value = cpu_to_le32(val),
+	};
+
+	return qcom_rpm_smd_write(icc_rpm_smd.rpm, ctx, rsc_type, id, &req,
+				  sizeof(req));
+}
+EXPORT_SYMBOL_GPL(qcom_icc_rpm_smd_send);
+
+static int qcom_icc_rpm_smd_probe(struct platform_device *pdev)
+{
+	icc_rpm_smd.rpm = dev_get_drvdata(pdev->dev.parent);
+	if (!icc_rpm_smd.rpm) {
+		dev_err(&pdev->dev, "unable to retrieve handle to RPM\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id qcom_icc_rpm_smd_dt_match[] = {
+	{ .compatible = "qcom,interconnect-smd-rpm", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, qcom_icc_rpm_smd_dt_match);
+
+static struct platform_driver qcom_interconnect_rpm_smd_driver = {
+	.driver = {
+		.name		= "qcom-interconnect-smd-rpm",
+		.of_match_table	= qcom_icc_rpm_smd_dt_match,
+	},
+	.probe = qcom_icc_rpm_smd_probe,
+};
+
+static int __init rpm_smd_interconnect_init(void)
+{
+	return platform_driver_register(&qcom_interconnect_rpm_smd_driver);
+}
+subsys_initcall(rpm_smd_interconnect_init);
+
+static void __exit rpm_smd_interconnect_exit(void)
+{
+	platform_driver_unregister(&qcom_interconnect_rpm_smd_driver);
+}
+module_exit(rpm_smd_interconnect_exit)
+
+MODULE_AUTHOR("Georgi Djakov <georgi.djakov@linaro.org>");
+MODULE_DESCRIPTION("Qualcomm SMD RPM interconnect driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/interconnect/qcom/smd-rpm.h b/drivers/interconnect/qcom/smd-rpm.h
new file mode 100644
index 000000000000..11c280eb86dc
--- /dev/null
+++ b/drivers/interconnect/qcom/smd-rpm.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018, Linaro Ltd.
+ * Author: Georgi Djakov <georgi.djakov@linaro.org>
+ */
+
+#ifndef __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+#define __DRIVERS_INTERCONNECT_QCOM_SMD_RPM_H
+
+#include <linux/soc/qcom/smd-rpm.h>
+
+bool qcom_icc_rpm_smd_available(void);
+int qcom_icc_rpm_smd_send(int ctx, int rsc_type, int id, u32 val);
+
+#endif

  parent reply	other threads:[~2018-08-31 14:01 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-31 14:01 [PATCH v9 0/8] Introduce on-chip interconnect API Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 1/8] interconnect: Add generic " Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 2/8] dt-bindings: Introduce interconnect binding Georgi Djakov
2018-09-25 18:02   ` Rob Herring
2018-09-26 14:34     ` Jordan Crouse
2018-10-01 20:56       ` Saravana Kannan
2018-10-01 21:26         ` Jordan Crouse
2018-10-01 21:51           ` Saravana Kannan
2018-09-26 14:42     ` Georgi Djakov
2018-09-26 14:48       ` Sudeep Holla
2018-09-26 15:03         ` Georgi Djakov
2018-10-01 23:49         ` Saravana Kannan
2018-10-02 11:17           ` Sudeep Holla
2018-10-02 18:56             ` Saravana Kannan
2018-10-03  9:33               ` Sudeep Holla
2018-10-03 18:06                 ` Saravana Kannan
2018-10-10 15:02                   ` Sudeep Holla
2018-11-27 18:05       ` Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 3/8] interconnect: Allow endpoints translation via DT Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 4/8] interconnect: Add debugfs support Georgi Djakov
2018-08-31 14:01 ` Georgi Djakov [this message]
2018-09-25 18:17   ` [PATCH v9 5/8] interconnect: qcom: Add RPM communication Rob Herring
2018-10-02 11:02     ` Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 6/8] dt-bindings: interconnect: Document qcom, msm8916 NoC bindings Georgi Djakov
2018-09-25 18:22   ` [PATCH v9 6/8] dt-bindings: interconnect: Document qcom,msm8916 " Rob Herring
2018-10-02 11:02     ` Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 7/8] interconnect: qcom: Add msm8916 interconnect provider driver Georgi Djakov
2018-08-31 14:01 ` [PATCH v9 8/8] MAINTAINERS: add a maintainer for the interconnect API Georgi Djakov
2018-09-04 10:24 ` [PATCH v9 0/8] Introduce on-chip " Amit Kucheria
2018-09-04 23:36   ` Stephen Rothwell
2018-09-05 14:50     ` Georgi Djakov
2018-09-05 15:05       ` Stephen Rothwell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180831140151.13972-6-georgi.djakov@linaro.org \
    --to=georgi.djakov@linaro.org \
    --cc=abailon@baylibre.com \
    --cc=amit.kucheria@linaro.org \
    --cc=arnd@arndb.de \
    --cc=bjorn.andersson@linaro.org \
    --cc=daidavid1@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=evgreen@chromium.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=mturquette@baylibre.com \
    --cc=rjw@rjwysocki.net \
    --cc=robh+dt@kernel.org \
    --cc=seansw@qti.qualcomm.com \
    --cc=skannan@codeaurora.org \
    --cc=vincent.guittot@linaro.org \
    --subject='Re: [PATCH v9 5/8] interconnect: qcom: Add RPM communication' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.