From mboxrd@z Thu Jan  1 00:00:00 1970
From: Bjorn Andersson <bjorn.andersson@linaro.org>
Subject: Re: [PATCH V4 3/8] backlight: qcom-wled: Add new properties for
 PMI8998
Date: Mon, 3 Sep 2018 11:55:10 -0700
Message-ID: <20180903185510.GB3153@tuxbook-pro>
References: <1531131741-19971-1-git-send-email-kgunda@codeaurora.org>
 <1531131741-19971-4-git-send-email-kgunda@codeaurora.org>
 <20180807052355.GA23866@tuxbook-pro>
 <897ab82c450bff71658c1fa32e7e6021@codeaurora.org>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Return-path: <linux-kernel-owner@vger.kernel.org>
Content-Disposition: inline
In-Reply-To: <897ab82c450bff71658c1fa32e7e6021@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
To: kgunda@codeaurora.org
Cc: jingoohan1@gmail.com, lee.jones@linaro.org, b.zolnierkie@samsung.com, dri-devel@lists.freedesktop.org, daniel.thompson@linaro.org, jacek.anaszewski@gmail.com, pavel@ucw.cz, robh+dt@kernel.org, mark.rutland@arm.com, linux-leds@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-msm-owner@vger.kernel.org
List-Id: linux-leds@vger.kernel.org

On Wed 15 Aug 22:23 PDT 2018, kgunda@codeaurora.org wrote:

> On 2018-08-07 10:53, Bjorn Andersson wrote:
> > On Mon 09 Jul 03:22 PDT 2018, Kiran Gunda wrote:
> > > diff --git
> > > a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
> > > b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.txt
> > [..]
> > >  - qcom,num-strings
> > >  	Usage:        optional
> > >  	Value type:   <u32>
> > >  	Definition:   #; number of led strings attached;
> > > -		      value from 1 to 3. default: 2
> > > -		      This property is supported only for PM8941.
> > > +		      value: For PM8941 from 1 to 3.
> > > +			     For PMI8998 from 1 to 4.
> > [..]
> > > +- qcom,enabled-strings
> > > +	Usage:        optional
> > > +	Value tyoe:   <u32 array>
> > > +	Definition:   Array of the WLED strings numbered from 0 to 3. Each
> > > +		      string of leds are operated individually. Specify the
> > > +		      list of strings used by the device. Any combination of
> > > +		      led strings can be used.
> > [..]
> > > 
> > >  Example:
> > > 
> > > @@ -99,4 +146,5 @@ pm8941-wled@d800 {
> > >  	qcom,switching-freq = <1600>;
> > >  	qcom,ovp = <29>;
> > >  	qcom,num-strings = <2>;
> > > +	qcom,enabled-strings = <0x00 0x01>;
> > 
> > Nit. I would assume that specifying qcom,num-strings = <2> implies that
> > the first 2 strings are used, so one would not also specify
> > qcom,enabled-strings.
> > 
> Thanks Bjorn for reviewing the series !
> 
> "qcom,enabled-strings" need be specified along with the "qcom,num-strings".
> Because the enabled-strings can be <0, 2> or <0, 3 > also. The driver picks
> the string
> configuration from the enabled-strings array and enable only those
> current-sinks.
> 

The original binding described qcom,num-strings to mean "the first N
strings", requiring qcom,enabled-strings now would break backwards
compatibility with this binding.

In the case that qcom,enabled-strings is specified we can easily derive
num-strings from the listed entires. So I would suggest that you look
for enabled-strings and if not found fall back to checking for
num-strings.

Regards,
Bjorn