All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Gray <jsg@jsg.id.au>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 3/3] doc: qemu-arm: Drop highmem=off references
Date: Tue, 4 Sep 2018 16:22:42 +1000	[thread overview]
Message-ID: <20180904062242.GA83667@largo.jsg.id.au> (raw)
In-Reply-To: <20180514154752.31081-3-tuomas.tynkkynen@iki.fi>

On Mon, May 14, 2018 at 06:47:52PM +0300, Tuomas Tynkkynen wrote:
> Now that U-Boot works fine with highmem enabled, there is no need to
> tell users to disable highmem.
>
> Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
> ---
>  doc/README.qemu-arm | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/doc/README.qemu-arm b/doc/README.qemu-arm
> index 6f6f07d8bb..260165638a 100644
> --- a/doc/README.qemu-arm
> +++ b/doc/README.qemu-arm
> @@ -39,13 +39,12 @@ Running U-Boot
>  The minimal QEMU command line to get U-Boot up and running is:
>
>  - For ARM:
> -    qemu-system-arm -machine virt,highmem=off -bios u-boot.bin
> +    qemu-system-arm -machine virt -bios u-boot.bin
>
>  - For AArch64:
> -    qemu-system-aarch64 -machine virt,highmem=off -cpu cortex-a57 -bios u-boot.bin
> +    qemu-system-aarch64 -machine virt -cpu cortex-a57 -bios u-boot.bin
>
> -The 'highmem=off' parameter to the 'virt' machine is required for PCI to work
> -in U-Boot. Also, for some odd reason qemu-system-aarch64 needs to be explicitly
> +Note that for some odd reason qemu-system-aarch64 needs to be explicitly
>  told to use a 64-bit CPU or it will boot in 32-bit mode.
>
>  Additional peripherals that have been tested to work in both U-Boot and Linux

Something has changed as qemu 3.0 requires highmem=off again.
qemu 2.12.0 works without highmem=off.

$ qemu-system-aarch64 --version
QEMU emulator version 3.0.0
Copyright (c) 2003-2017 Fabrice Bellard and the QEMU Project developers
$ qemu-system-aarch64 -M virt -cpu cortex-a57 -bios u-boot.bin -serial stdio

U-Boot 2018.09-rc3 (Sep 04 2018 - 13:03:12 +1000)

DRAM:  128 MiB
In:    pl011 at 9000000
Out:   pl011 at 9000000
Err:   pl011 at 9000000
Net:   No ethernet found.
"Synchronous Abort" handler, esr 0x96000005
elr: 00000000000258e0 lr : 000000000002589c (reloc)
elr: 0000000047f978e0 lr : 0000000047f9789c
x0 : 000000401000000e x1 : 0000000000000000
x2 : 000000401000000e x3 : 0000000046e608c8
x4 : 0000004010000000 x5 : 0000000000000000
x6 : 0000000047f9889c x7 : 0000000000000002
x8 : 0000000000000003 x9 : 0000000000000004
x10: 0000000046e60de8 x11: 000000000000152c
x12: 0000000046e6089c x13: 0000000000001200
x14: 0000000046e6092c x15: 0000000046e60de8
x16: 0000000000000000 x17: 0000000000000000
x18: 0000000046f61de8 x19: 0000000046e60940
x20: 0000000000000000 x21: 0000000047fcc0a8
x22: 0000000046f62450 x23: 0000000047fcc680
x24: 000000000000ff00 x25: 0000000000000000
x26: 0000000047fcc000 x27: 0000000000000000
x28: 0000000000000000 x29: 0000000046e608a0

Resetting CPU ...

resetting ...

$ qemu-system-aarch64 -M virt,highmem=off -cpu cortex-a57 -bios u-boot.bin -serial stdio

U-Boot 2018.09-rc3 (Sep 04 2018 - 13:03:12 +1000)

DRAM:  128 MiB
In:    pl011 at 9000000
Out:   pl011 at 9000000
Err:   pl011 at 9000000
Net:   No ethernet found.
Hit any key to stop autoboot:  0 
scanning bus for devices...

Device 0: unknown device
=> 

  parent reply	other threads:[~2018-09-04  6:22 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-14 15:47 [U-Boot] [PATCH 1/3] PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set Tuomas Tynkkynen
2018-05-14 15:47 ` [U-Boot] [PATCH 2/3] ARM: qemu-arm: Bump RAM size in AArch64 MMU table Tuomas Tynkkynen
2018-05-14 19:51   ` Simon Glass
2018-05-28 19:12   ` [U-Boot] [U-Boot, " Tom Rini
2018-05-14 15:47 ` [U-Boot] [PATCH 3/3] doc: qemu-arm: Drop highmem=off references Tuomas Tynkkynen
2018-05-14 19:51   ` Simon Glass
2018-05-28 19:12   ` [U-Boot] [U-Boot, " Tom Rini
2018-09-04  6:22   ` Jonathan Gray [this message]
2018-05-14 19:51 ` [U-Boot] [PATCH 1/3] PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set Simon Glass
2018-05-28 19:12 ` [U-Boot] [U-Boot, " Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180904062242.GA83667@largo.jsg.id.au \
    --to=jsg@jsg.id.au \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.