[PATCH 4.14 00/89] 4.14.69-stable review

[PATCH 4.14 00/89] 4.14.69-stable review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 4.14.69 release.
There are 89 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.69-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 4.14.69-rc1

James Morse <james.morse@arm.com>
    arm64: mm: always enable CONFIG_HOLES_IN_ZONE

Jeremy Cline <jcline@redhat.com>
    fs/quota: Fix spectre gadget in do_quotactl

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam/qi - fix error path in xts setkey

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam/jr - fix descriptor DMA unmapping

Horia Geantă <horia.geanta@nxp.com>
    crypto: caam - fix DMA mapping direction for RSA forms 2 & 3

Ondrej Mosnacek <omosnace@redhat.com>
    crypto: vmx - Fix sleep-in-atomic bugs

Adrian Hunter <adrian.hunter@intel.com>
    perf auxtrace: Fix queue resize

Eddie.Horng <eddie.horng@mediatek.com>
    cap_inode_getsecurity: use d_find_any_alias() instead of d_find_alias()

Shan Hai <shan.hai@oracle.com>
    bcache: release dc->writeback_lock properly in bch_writeback_thread()

Vishal Verma <vishal.l.verma@intel.com>
    libnvdimm: fix ars_status output length calculation

Christian Brauner <christian@brauner.io>
    getxattr: use correct xattr length

Mikulas Patocka <mpatocka@redhat.com>
    udlfb: set optimal write delay

Mikulas Patocka <mpatocka@redhat.com>
    fb: fix lost console when the user unplugs a USB adapter

Vignesh R <vigneshr@ti.com>
    pwm: tiehrpwm: Fix disabling of output of PWMs

Vignesh R <vigneshr@ti.com>
    pwm: tiehrpwm: Don't use emulation mode bits to control PWM output

Richard Weinberger <richard@nod.at>
    ubifs: Fix synced_i_size calculation for xattr inodes

Richard Weinberger <richard@nod.at>
    ubifs: xattr: Don't operate on deleted inodes

Richard Weinberger <richard@nod.at>
    ubifs: Check data node size before truncate

Richard Weinberger <richard@nod.at>
    Revert "UBIFS: Fix potential integer overflow in allocation"

Richard Weinberger <richard@nod.at>
    ubifs: Fix memory leak in lprobs self-check

Jann Horn <jannh@google.com>
    userns: move user access out of the mutex

Jann Horn <jannh@google.com>
    sys: don't hold uts_sem while accessing userspace memory

Jacob Pan <jacob.jun.pan@linux.intel.com>
    iommu/vt-d: Fix dev iotlb pfsid use

Jacob Pan <jacob.jun.pan@linux.intel.com>
    iommu/vt-d: Add definitions for PFSID

Peter Zijlstra <peterz@infradead.org>
    mm/tlb: Remove tlb_remove_table() non-concurrent condition

Jon Hunter <jonathanh@nvidia.com>
    ARM: tegra: Fix Tegra30 Cardhu PCA954x reset

Trond Myklebust <trondmy@gmail.com>
    NFSv4: Fix a sleep in atomic context in nfs4_callback_sequence()

Trond Myklebust <trondmy@gmail.com>
    NFSv4: Fix locking in pnfs_generic_recover_commit_reqs

Bill Baker <Bill.Baker@Oracle.com>
    NFSv4 client live hangs after live data migration recovery

Dan Carpenter <dan.carpenter@oracle.com>
    pnfs/blocklayout: off by one in bl_map_stripe()

Maciej S. Szmigiero <mail@maciej.szmigiero.name>
    block, bfq: return nbytes and not zero from struct cftype .write() method

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: increase ranges in ___invalidate_{i,d}cache_all

Max Filippov <jcmvbkbc@gmail.com>
    xtensa: limit offsets in __loop_cache_{all,page}

Paul Mackerras <paulus@ozlabs.org>
    KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pages

Paolo Bonzini <pbonzini@redhat.com>
    KVM: VMX: fixes for vmentry_l1d_flush module parameter

zhangyi (F) <yi.zhang@huawei.com>
    PM / sleep: wakeup: Fix build error caused by missing SRCU support

Henry Willard <henry.willard@oracle.com>
    cpufreq: governor: Avoid accessing invalid governor_data

Peter Kalauskas <peskal@google.com>
    drivers/block/zram/zram_drv.c: fix bug storing backing_dev

Amir Goldstein <amir73il@gmail.com>
    ovl: fix wrong use of impure dir cache in ovl_iterate()

Rafael David Tinoco <rafael.tinoco@linaro.org>
    mfd: hi655x: Fix regmap area declared size for hi655x

Steven Rostedt (VMware) <rostedt@goodmis.org>
    uprobes: Use synchronize_rcu() not synchronize_sched()

Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
    livepatch: Validate module/old func name length

Steven Rostedt (VMware) <rostedt@goodmis.org>
    printk/tracing: Do not trace printk_nmi_enter()

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing/blktrace: Fix to allow setting same value

Steven Rostedt (VMware) <rostedt@goodmis.org>
    tracing: Do not call start/stop() functions when tracing_on does not change

Johan Hovold <johan@kernel.org>
    rtc: omap: fix potential crash on power off

Nadav Amit <namit@vmware.com>
    vmw_balloon: fix VMCI use when balloon built into kernel

Nadav Amit <namit@vmware.com>
    vmw_balloon: VMCI_DOORBELL_SET does not check status

Nadav Amit <namit@vmware.com>
    vmw_balloon: do not use 2MB without batching

Nadav Amit <namit@vmware.com>
    vmw_balloon: fix inflation of 64-bit GFNs

Chanwoo Choi <cw00.choi@samsung.com>
    extcon: Release locking when sending the notification of connector state

Lars-Peter Clausen <lars@metafoo.de>
    iio: ad9523: Fix return value for ad952x_store()

Lars-Peter Clausen <lars@metafoo.de>
    iio: ad9523: Fix displayed phase

Gustavo A. R. Silva <gustavo@embeddedor.com>
    iio: sca3000: Fix missing return in switch

Dexuan Cui <decui@microsoft.com>
    Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()

Tycho Andersen <tycho@tycho.ws>
    uart: fix race between uart_put_char() and uart_shutdown()

Mikulas Patocka <mpatocka@redhat.com>
    dm crypt: don't decrease device limits

Ilya Dryomov <idryomov@gmail.com>
    dm cache metadata: set dirty on all cache blocks after a crash

Mike Snitzer <snitzer@redhat.com>
    dm cache metadata: save in-core policy_hint_size to on-disk superblock

Hou Tao <houtao1@huawei.com>
    dm thin: stop no_space_timeout worker when switching to write-mode

Mikulas Patocka <mpatocka@redhat.com>
    dm integrity: change 'suspending' variable from bool to int

Tomas Bortoli <tomasbortoli@gmail.com>
    net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()

Tomas Bortoli <tomasbortoli@gmail.com>
    net/9p/client.c: version pointer uninitialized

jiangyiwen <jiangyiwen@huawei.com>
    9p/virtio: fix off-by-one error in sg list bounds check

piaojun <piaojun@huawei.com>
    fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed

Tomas Bortoli <tomasbortoli@gmail.com>
    9p: fix multiple NULL-pointer-dereferences

Bart Van Assche <bart.vanassche@wdc.com>
    RDMA/rxe: Set wqe->status correctly if an unexpected response is received

Bart Van Assche <bart.vanassche@wdc.com>
    ib_srpt: Fix a use-after-free in srpt_close_ch()

Vaibhav Jain <vaibhav@linux.ibm.com>
    cxl: Fix wrong comparison in cxl_adapter_context_get()

Benjamin Herrenschmidt <benh@kernel.crashing.org>
    powerpc/powernv/pci: Work around races in PCI bridge enabling

Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
    powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.

Hari Bathini <hbathini@linux.ibm.com>
    powerpc/fadump: handle crash memory ranges array index overflow

Yannik Sembritzki <yannik@sembritzki.me>
    Fix kexec forbidding kernels signed with keys in the secondary keyring to boot

Yannik Sembritzki <yannik@sembritzki.me>
    Replace magic for trusting the secondary keyring with #define

Gustavo A. R. Silva <gustavo@embeddedor.com>
    mailbox: xgene-slimpro: Fix potential NULL pointer dereference

Javier Martinez Canillas <javierm@redhat.com>
    media: Revert "[media] tvp5150: fix pad format frame height"

Daniel Mack <daniel@zonque.org>
    libertas: fix suspend and resume for SDIO connected cards

Matthew Auld <matthew.auld@intel.com>
    drm/i915/userptr: reject zero user_size

Ming Lei <ming.lei@redhat.com>
    block: really disable runtime-pm for blk-mq

xiao jin <jin.xiao@intel.com>
    block: blk_init_allocated_queue() set q->fq as NULL in the fail case

Markus Stockhausen <stockhausen@collogia.de>
    readahead: stricter check for bdi io_pages

Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
    mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS

Janek Kotas <jank@cadence.com>
    spi: cadence: Change usleep_range() to udelay(), for atomic context

Krzysztof Kozlowski <krzk@kernel.org>
    spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe

Mika Westerberg <mika.westerberg@linux.intel.com>
    spi: pxa2xx: Add support for Intel Ice Lake

Bartosz Golaszewski <bgolaszewski@baylibre.com>
    spi: davinci: fix a NULL pointer dereference

Chirantan Ekbote <chirantan@chromium.org>
    9p/net: Fix zero-copy path in the 9p virtio transport

Alexander Aring <aring@mojatatu.com>
    net: mac802154: tx: expand tailroom if necessary

Alexander Aring <aring@mojatatu.com>
    net: 6lowpan: fix reserved space for single frames


-------------

Diffstat:

 Makefile                                        |  4 +-
 arch/alpha/kernel/osf_sys.c                     | 51 +++++++------
 arch/arm/boot/dts/tegra30-cardhu.dtsi           |  1 +
 arch/arm64/Kconfig                              |  1 -
 arch/powerpc/include/asm/fadump.h               |  3 -
 arch/powerpc/kernel/fadump.c                    | 91 +++++++++++++++++++----
 arch/powerpc/mm/mmu_context_iommu.c             | 17 +++--
 arch/powerpc/platforms/powernv/pci-ioda.c       | 37 ++++++++++
 arch/powerpc/platforms/pseries/ras.c            |  2 +-
 arch/sparc/kernel/sys_sparc_32.c                | 22 +++---
 arch/sparc/kernel/sys_sparc_64.c                | 20 +++---
 arch/x86/kernel/kexec-bzimage64.c               |  2 +-
 arch/x86/kvm/vmx.c                              | 26 ++++---
 arch/xtensa/include/asm/cacheasm.h              | 69 +++++++++++-------
 block/bfq-cgroup.c                              |  3 +-
 block/blk-core.c                                |  7 +-
 certs/system_keyring.c                          |  3 +-
 crypto/asymmetric_keys/pkcs7_key_type.c         |  2 +-
 drivers/block/zram/zram_drv.c                   |  7 +-
 drivers/cpufreq/cpufreq_governor.c              | 12 +++-
 drivers/crypto/caam/caamalg_qi.c                |  6 +-
 drivers/crypto/caam/caampkc.c                   | 20 +++---
 drivers/crypto/caam/jr.c                        |  3 +-
 drivers/crypto/vmx/aes_cbc.c                    | 30 ++++----
 drivers/crypto/vmx/aes_xts.c                    | 21 ++++--
 drivers/extcon/extcon.c                         |  3 +-
 drivers/gpu/drm/i915/i915_gem_userptr.c         |  3 +
 drivers/hv/channel.c                            | 40 ++++++-----
 drivers/hv/channel_mgmt.c                       |  6 ++
 drivers/iio/accel/sca3000.c                     |  1 +
 drivers/iio/frequency/ad9523.c                  |  4 +-
 drivers/infiniband/sw/rxe/rxe_comp.c            |  1 +
 drivers/infiniband/ulp/srpt/ib_srpt.c           |  3 +-
 drivers/iommu/dmar.c                            |  6 +-
 drivers/iommu/intel-iommu.c                     | 18 ++++-
 drivers/mailbox/mailbox-xgene-slimpro.c         |  6 +-
 drivers/md/bcache/writeback.c                   |  4 +-
 drivers/md/dm-cache-metadata.c                  | 13 ++--
 drivers/md/dm-crypt.c                           | 10 +--
 drivers/md/dm-integrity.c                       |  6 +-
 drivers/md/dm-thin.c                            |  2 +
 drivers/media/i2c/tvp5150.c                     |  2 +-
 drivers/mfd/hi655x-pmic.c                       |  2 +-
 drivers/misc/cxl/main.c                         |  2 +-
 drivers/misc/vmw_balloon.c                      | 67 ++++++++++-------
 drivers/mmc/host/renesas_sdhi_internal_dmac.c   |  2 +-
 drivers/net/wireless/marvell/libertas/dev.h     |  1 +
 drivers/net/wireless/marvell/libertas/if_sdio.c | 30 ++++++--
 drivers/nvdimm/bus.c                            |  4 +-
 drivers/pwm/pwm-tiehrpwm.c                      | 14 +---
 drivers/rtc/rtc-omap.c                          | 14 ++--
 drivers/spi/spi-cadence.c                       |  2 +-
 drivers/spi/spi-davinci.c                       |  2 +-
 drivers/spi/spi-fsl-dspi.c                      | 24 +++----
 drivers/spi/spi-pxa2xx.c                        |  4 ++
 drivers/tty/serial/serial_core.c                | 17 +++--
 drivers/video/fbdev/core/fbmem.c                | 38 ++++++++--
 fs/9p/xattr.c                                   |  6 +-
 fs/nfs/blocklayout/dev.c                        |  2 +-
 fs/nfs/callback_proc.c                          | 14 ++--
 fs/nfs/nfs4proc.c                               |  9 ++-
 fs/nfs/pnfs_nfs.c                               | 16 ++---
 fs/overlayfs/readdir.c                          | 19 ++++-
 fs/quota/quota.c                                |  2 +
 fs/ubifs/journal.c                              | 21 ++++--
 fs/ubifs/lprops.c                               |  8 +--
 fs/ubifs/xattr.c                                | 24 +++++++
 fs/xattr.c                                      |  2 +-
 include/linux/hyperv.h                          |  2 +
 include/linux/intel-iommu.h                     |  8 ++-
 include/linux/sunrpc/clnt.h                     |  1 +
 include/linux/verification.h                    |  6 ++
 include/video/udlfb.h                           |  2 +-
 kernel/livepatch/core.c                         |  6 ++
 kernel/power/Kconfig                            |  1 +
 kernel/printk/printk_safe.c                     |  4 +-
 kernel/sys.c                                    | 95 ++++++++++++-------------
 kernel/trace/blktrace.c                         |  4 ++
 kernel/trace/trace.c                            |  4 +-
 kernel/trace/trace_uprobe.c                     |  2 +-
 kernel/user_namespace.c                         | 24 +++----
 kernel/utsname_sysctl.c                         | 41 ++++++-----
 mm/memory.c                                     |  9 ---
 mm/readahead.c                                  | 12 +++-
 net/9p/client.c                                 |  2 +-
 net/9p/trans_fd.c                               |  7 +-
 net/9p/trans_rdma.c                             |  3 +
 net/9p/trans_virtio.c                           | 13 +++-
 net/9p/trans_xen.c                              |  3 +
 net/ieee802154/6lowpan/tx.c                     | 21 +++++-
 net/mac802154/tx.c                              | 15 +++-
 net/sunrpc/clnt.c                               | 28 +++++---
 security/commoncap.c                            |  2 +-
 tools/perf/util/auxtrace.c                      |  3 +
 94 files changed, 831 insertions(+), 421 deletions(-)

[PATCH 4.14 01/89] net: 6lowpan: fix reserved space for single frames

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Aring <aring@mojatatu.com>

commit ac74f87c789af40936a80131c4759f3e72579c3a upstream.

This patch fixes patch add handling to take care tail and headroom for
single 6lowpan frames. We need to be sure we have a skb with the right
head and tailroom for single frames. This patch do it by using
skb_copy_expand() if head and tailroom is not enough allocated by upper
layer.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195059
Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/ieee802154/6lowpan/tx.c |   21 ++++++++++++++++++---
 1 file changed, 18 insertions(+), 3 deletions(-)

--- a/net/ieee802154/6lowpan/tx.c
+++ b/net/ieee802154/6lowpan/tx.c
@@ -265,9 +265,24 @@ netdev_tx_t lowpan_xmit(struct sk_buff *
 	/* We must take a copy of the skb before we modify/replace the ipv6
 	 * header as the header could be used elsewhere
 	 */
-	skb = skb_unshare(skb, GFP_ATOMIC);
-	if (!skb)
-		return NET_XMIT_DROP;
+	if (unlikely(skb_headroom(skb) < ldev->needed_headroom ||
+		     skb_tailroom(skb) < ldev->needed_tailroom)) {
+		struct sk_buff *nskb;
+
+		nskb = skb_copy_expand(skb, ldev->needed_headroom,
+				       ldev->needed_tailroom, GFP_ATOMIC);
+		if (likely(nskb)) {
+			consume_skb(skb);
+			skb = nskb;
+		} else {
+			kfree_skb(skb);
+			return NET_XMIT_DROP;
+		}
+	} else {
+		skb = skb_unshare(skb, GFP_ATOMIC);
+		if (!skb)
+			return NET_XMIT_DROP;
+	}
 
 	ret = lowpan_header(skb, ldev, &dgram_size, &dgram_offset);
 	if (ret < 0) {

[PATCH 4.14 02/89] net: mac802154: tx: expand tailroom if necessary

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexander Aring <aring@mojatatu.com>

commit f9c52831133050c6b82aa8b6831c92da2bbf2a0b upstream.

This patch is necessary if case of AF_PACKET or other socket interface
which I am aware of it and didn't allocated the necessary room.

Reported-by: David Palma <david.palma@ntnu.no>
Reported-by: Rabi Narayan Sahoo <rabinarayans0828@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/mac802154/tx.c |   15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

--- a/net/mac802154/tx.c
+++ b/net/mac802154/tx.c
@@ -63,8 +63,21 @@ ieee802154_tx(struct ieee802154_local *l
 	int ret;
 
 	if (!(local->hw.flags & IEEE802154_HW_TX_OMIT_CKSUM)) {
-		u16 crc = crc_ccitt(0, skb->data, skb->len);
+		struct sk_buff *nskb;
+		u16 crc;
 
+		if (unlikely(skb_tailroom(skb) < IEEE802154_FCS_LEN)) {
+			nskb = skb_copy_expand(skb, 0, IEEE802154_FCS_LEN,
+					       GFP_ATOMIC);
+			if (likely(nskb)) {
+				consume_skb(skb);
+				skb = nskb;
+			} else {
+				goto err_tx;
+			}
+		}
+
+		crc = crc_ccitt(0, skb->data, skb->len);
 		put_unaligned_le16(crc, skb_put(skb, 2));
 	}
 

[PATCH 4.14 03/89] 9p/net: Fix zero-copy path in the 9p virtio transport

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chirantan Ekbote <chirantan@chromium.org>

commit d28c756caee6e414d9ba367d0b92da24145af2a8 upstream.

The zero-copy optimization when reading or writing large chunks of data
is quite useful.  However, the 9p messages created through the zero-copy
write path have an incorrect message size: it should be the size of the
header + size of the data being written but instead it's just the size
of the header.

This only works if the server ignores the size field of the message and
otherwise breaks the framing of the protocol. Fix this by re-writing the
message size field with the correct value.

Tested by running `dd if=/dev/zero of=out bs=4k count=1` inside a
virtio-9p mount.

Link: http://lkml.kernel.org/r/20180717003529.114368-1-chirantan@chromium.org
Signed-off-by: Chirantan Ekbote <chirantan@chromium.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Tested-by: Greg Kurz <groug@kaod.org>
Cc: Dylan Reid <dgreid@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/9p/trans_virtio.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -406,6 +406,7 @@ p9_virtio_zc_request(struct p9_client *c
 	p9_debug(P9_DEBUG_TRANS, "virtio request\n");
 
 	if (uodata) {
+		__le32 sz;
 		int n = p9_get_mapped_pages(chan, &out_pages, uodata,
 					    outlen, &offs, &need_drop);
 		if (n < 0)
@@ -416,6 +417,12 @@ p9_virtio_zc_request(struct p9_client *c
 			memcpy(&req->tc->sdata[req->tc->size - 4], &v, 4);
 			outlen = n;
 		}
+		/* The size field of the message must include the length of the
+		 * header and the length of the data.  We didn't actually know
+		 * the length of the data until this point so add it in now.
+		 */
+		sz = cpu_to_le32(req->tc->size + outlen);
+		memcpy(&req->tc->sdata[0], &sz, sizeof(sz));
 	} else if (uidata) {
 		int n = p9_get_mapped_pages(chan, &in_pages, uidata,
 					    inlen, &offs, &need_drop);

[PATCH 4.14 04/89] spi: davinci: fix a NULL pointer dereference

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bartosz Golaszewski <bgolaszewski@baylibre.com>

commit 563a53f3906a6b43692498e5b3ae891fac93a4af upstream.

On non-OF systems spi->controlled_data may be NULL. This causes a NULL
pointer derefence on dm365-evm.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-davinci.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -217,7 +217,7 @@ static void davinci_spi_chipselect(struc
 	pdata = &dspi->pdata;
 
 	/* program delay transfers if tx_delay is non zero */
-	if (spicfg->wdelay)
+	if (spicfg && spicfg->wdelay)
 		spidat1 |= SPIDAT1_WDEL;
 
 	/*

[PATCH 4.14 05/89] spi: pxa2xx: Add support for Intel Ice Lake

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mika Westerberg <mika.westerberg@linux.intel.com>

commit 22d71a5097ec7059b6cbbee678a4f88484695941 upstream.

Intel Ice Lake SPI host controller follows the Intel Cannon Lake but the
PCI IDs are different. Add the new PCI IDs to the driver supported
devices list.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-pxa2xx.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1480,6 +1480,10 @@ static const struct pci_device_id pxa2xx
 	{ PCI_VDEVICE(INTEL, 0x31c2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x31c4), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x31c6), LPSS_BXT_SSP },
+	/* ICL-LP */
+	{ PCI_VDEVICE(INTEL, 0x34aa), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x34ab), LPSS_CNL_SSP },
+	{ PCI_VDEVICE(INTEL, 0x34fb), LPSS_CNL_SSP },
 	/* APL */
 	{ PCI_VDEVICE(INTEL, 0x5ac2), LPSS_BXT_SSP },
 	{ PCI_VDEVICE(INTEL, 0x5ac4), LPSS_BXT_SSP },

[PATCH 4.14 06/89] spi: spi-fsl-dspi: Fix imprecise abort on VF500 during probe

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <krzk@kernel.org>

commit d8ffee2f551a627ffb7b216e2da322cb9a037f77 upstream.

Registers of DSPI should not be accessed before enabling its clock.  On
Toradex Colibri VF50 on Iris carrier board this could be seen during
bootup as imprecise abort:

    Unhandled fault: imprecise external abort (0x1c06) at 0x00000000
    Internal error: : 1c06 [#1] ARM
    Modules linked in:
    CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97
    Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
    Backtrace:
    [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc)
    [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8)
    [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8)
    [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4)
    [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4)
    [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28)
    [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218)
    [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100)
    [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50)
    [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20)
    [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174)
    [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8)
    [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114)
    [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c)

Cc: <stable@vger.kernel.org>
Fixes: 5ee67b587a2b ("spi: dspi: clear SPI_SR before enable interrupt")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-fsl-dspi.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -1006,31 +1006,31 @@ static int dspi_probe(struct platform_de
 		goto out_master_put;
 	}
 
+	dspi->clk = devm_clk_get(&pdev->dev, "dspi");
+	if (IS_ERR(dspi->clk)) {
+		ret = PTR_ERR(dspi->clk);
+		dev_err(&pdev->dev, "unable to get clock\n");
+		goto out_master_put;
+	}
+	ret = clk_prepare_enable(dspi->clk);
+	if (ret)
+		goto out_master_put;
+
 	dspi_init(dspi);
 	dspi->irq = platform_get_irq(pdev, 0);
 	if (dspi->irq < 0) {
 		dev_err(&pdev->dev, "can't get platform irq\n");
 		ret = dspi->irq;
-		goto out_master_put;
+		goto out_clk_put;
 	}
 
 	ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
 			pdev->name, dspi);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
-		goto out_master_put;
+		goto out_clk_put;
 	}
 
-	dspi->clk = devm_clk_get(&pdev->dev, "dspi");
-	if (IS_ERR(dspi->clk)) {
-		ret = PTR_ERR(dspi->clk);
-		dev_err(&pdev->dev, "unable to get clock\n");
-		goto out_master_put;
-	}
-	ret = clk_prepare_enable(dspi->clk);
-	if (ret)
-		goto out_master_put;
-
 	if (dspi->devtype_data->trans_mode == DSPI_DMA_MODE) {
 		ret = dspi_request_dma(dspi, res->start);
 		if (ret < 0) {

[PATCH 4.14 07/89] spi: cadence: Change usleep_range() to udelay(), for atomic context

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Janek Kotas <jank@cadence.com>

commit 931c4e9a72ae91d59c5332ffb6812911a749da8e upstream.

The path "spi: cadence: Add usleep_range() for
cdns_spi_fill_tx_fifo()" added a usleep_range() function call,
which cannot be used in atomic context.
However the cdns_spi_fill_tx_fifo() function can be called during
an interrupt which may result in a kernel panic:

BUG: scheduling while atomic: grep/561/0x00010002
Modules linked in:
Preemption disabled at:
[<ffffff800858ea28>] wait_for_common+0x48/0x178
CPU: 0 PID: 561 Comm: grep Not tainted 4.17.0 #1
Hardware name: Cadence CSP (DT)
Call trace:
 dump_backtrace+0x0/0x198
 show_stack+0x14/0x20
 dump_stack+0x8c/0xac
 __schedule_bug+0x6c/0xb8
 __schedule+0x570/0x5d8
 schedule+0x34/0x98
 schedule_hrtimeout_range_clock+0x98/0x110
 schedule_hrtimeout_range+0x10/0x18
 usleep_range+0x64/0x98
 cdns_spi_fill_tx_fifo+0x70/0xb0
 cdns_spi_irq+0xd0/0xe0
 __handle_irq_event_percpu+0x9c/0x128
 handle_irq_event_percpu+0x34/0x88
 handle_irq_event+0x48/0x78
 handle_fasteoi_irq+0xbc/0x1b0
 generic_handle_irq+0x24/0x38
 __handle_domain_irq+0x84/0xf8
 gic_handle_irq+0xc4/0x180

This patch replaces the function call with udelay() which can be
used in an atomic context, like an interrupt.

Signed-off-by: Jan Kotas <jank@cadence.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/spi/spi-cadence.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/spi/spi-cadence.c
+++ b/drivers/spi/spi-cadence.c
@@ -319,7 +319,7 @@ static void cdns_spi_fill_tx_fifo(struct
 		 */
 		if (cdns_spi_read(xspi, CDNS_SPI_ISR) &
 		    CDNS_SPI_IXR_TXFULL)
-			usleep_range(10, 20);
+			udelay(10);
 
 		if (xspi->txbuf)
 			cdns_spi_write(xspi, CDNS_SPI_TXD, *xspi->txbuf++);

[PATCH 4.14 08/89] mmc: renesas_sdhi_internal_dmac: fix #define RST_RESERVED_BITS

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

commit 9faf870e559a710c44e747ba20383ea82d8ac5d2 upstream.

The DM_CM_RST register actually has bits 0-31 defaulting to 1s and bits
32-63 defaulting to 0s -- fix off-by-one in #define RST_RESERVED_BITS.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/renesas_sdhi_internal_dmac.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/host/renesas_sdhi_internal_dmac.c
+++ b/drivers/mmc/host/renesas_sdhi_internal_dmac.c
@@ -44,7 +44,7 @@
 /* DM_CM_RST */
 #define RST_DTRANRST1		BIT(9)
 #define RST_DTRANRST0		BIT(8)
-#define RST_RESERVED_BITS	GENMASK_ULL(32, 0)
+#define RST_RESERVED_BITS	GENMASK_ULL(31, 0)
 
 /* DM_CM_INFO1 and DM_CM_INFO1_MASK */
 #define INFO1_CLEAR		0

[PATCH 4.14 09/89] readahead: stricter check for bdi io_pages

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Markus Stockhausen <stockhausen@collogia.de>

commit dc30b96ab6d569060741572cf30517d3179429a8 upstream.

ondemand_readahead() checks bdi->io_pages to cap the maximum pages
that need to be processed. This works until the readit section. If
we would do an async only readahead (async size = sync size) and
target is at beginning of window we expand the pages by another
get_next_ra_size() pages. Btrace for large reads shows that kernel
always issues a doubled size read at the beginning of processing.
Add an additional check for io_pages in the lower part of the func.
The fix helps devices that hard limit bio pages and rely on proper
handling of max_hw_read_sectors (e.g. older FusionIO cards). For
that reason it could qualify for stable.

Fixes: 9491ae4a ("mm: don't cap request size based on read-ahead setting")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Stockhausen stockhausen@collogia.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/readahead.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/mm/readahead.c
+++ b/mm/readahead.c
@@ -380,6 +380,7 @@ ondemand_readahead(struct address_space
 {
 	struct backing_dev_info *bdi = inode_to_bdi(mapping->host);
 	unsigned long max_pages = ra->ra_pages;
+	unsigned long add_pages;
 	pgoff_t prev_offset;
 
 	/*
@@ -469,10 +470,17 @@ readit:
 	 * Will this read hit the readahead marker made by itself?
 	 * If so, trigger the readahead marker hit now, and merge
 	 * the resulted next readahead window into the current one.
+	 * Take care of maximum IO pages as above.
 	 */
 	if (offset == ra->start && ra->size == ra->async_size) {
-		ra->async_size = get_next_ra_size(ra, max_pages);
-		ra->size += ra->async_size;
+		add_pages = get_next_ra_size(ra, max_pages);
+		if (ra->size + add_pages <= max_pages) {
+			ra->async_size = add_pages;
+			ra->size += add_pages;
+		} else {
+			ra->size = max_pages;
+			ra->async_size = max_pages >> 1;
+		}
 	}
 
 	return ra_submit(ra, mapping, filp);

[PATCH 4.14 10/89] block: blk_init_allocated_queue() set q->fq as NULL in the fail case

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: xiao jin <jin.xiao@intel.com>

commit 54648cf1ec2d7f4b6a71767799c45676a138ca24 upstream.

We find the memory use-after-free issue in __blk_drain_queue()
on the kernel 4.14. After read the latest kernel 4.18-rc6 we
think it has the same problem.

Memory is allocated for q->fq in the blk_init_allocated_queue().
If the elevator init function called with error return, it will
run into the fail case to free the q->fq.

Then the __blk_drain_queue() uses the same memory after the free
of the q->fq, it will lead to the unpredictable event.

The patch is to set q->fq as NULL in the fail case of
blk_init_allocated_queue().

Fixes: commit 7c94e1c157a2 ("block: introduce blk_flush_queue to drive flush machinery")
Cc: <stable@vger.kernel.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: xiao jin <jin.xiao@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-core.c |    1 +
 1 file changed, 1 insertion(+)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1025,6 +1025,7 @@ out_exit_flush_rq:
 		q->exit_rq_fn(q, q->fq->flush_rq);
 out_free_flush_queue:
 	blk_free_flush_queue(q->fq);
+	q->fq = NULL;
 	return -ENOMEM;
 }
 EXPORT_SYMBOL(blk_init_allocated_queue);

[PATCH 4.14 11/89] block: really disable runtime-pm for blk-mq

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ming Lei <ming.lei@redhat.com>

commit b233f127042dba991229e3882c6217c80492f6ef upstream.

Runtime PM isn't ready for blk-mq yet, and commit 765e40b675a9 ("block:
disable runtime-pm for blk-mq") tried to disable it. Unfortunately,
it can't take effect in that way since user space still can switch
it on via 'echo auto > /sys/block/sdN/device/power/control'.

This patch disables runtime-pm for blk-mq really by pm_runtime_disable()
and fixes all kinds of PM related kernel crash.

Cc: Tomas Janousek <tomi@nomi.cz>
Cc: Przemek Socha <soprwa@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <stable@vger.kernel.org>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/blk-core.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -3459,9 +3459,11 @@ EXPORT_SYMBOL(blk_finish_plug);
  */
 void blk_pm_runtime_init(struct request_queue *q, struct device *dev)
 {
-	/* not support for RQF_PM and ->rpm_status in blk-mq yet */
-	if (q->mq_ops)
+	/* Don't enable runtime PM for blk-mq until it is ready */
+	if (q->mq_ops) {
+		pm_runtime_disable(dev);
 		return;
+	}
 
 	q->dev = dev;
 	q->rpm_status = RPM_ACTIVE;

[PATCH 4.14 12/89] drm/i915/userptr: reject zero user_size

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthew Auld <matthew.auld@intel.com>

commit c11c7bfd213495784b22ef82a69b6489f8d0092f upstream.

Operating on a zero sized GEM userptr object will lead to explosions.

Fixes: 5cc9ed4b9a7a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Testcase: igt/gem_userptr_blits/input-checking
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502195021.30900-1-matthew.auld@intel.com
Cc: Loic <hackurx@opensec.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem_userptr.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/gpu/drm/i915/i915_gem_userptr.c
+++ b/drivers/gpu/drm/i915/i915_gem_userptr.c
@@ -782,6 +782,9 @@ i915_gem_userptr_ioctl(struct drm_device
 			    I915_USERPTR_UNSYNCHRONIZED))
 		return -EINVAL;
 
+	if (!args->user_size)
+		return -EINVAL;
+
 	if (offset_in_page(args->user_ptr | args->user_size))
 		return -EINVAL;
 

[PATCH 4.14 13/89] libertas: fix suspend and resume for SDIO connected cards

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Daniel Mack <daniel@zonque.org>

commit 7444a8092906ed44c09459780c56ba57043e39b1 upstream.

Prior to commit 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM
callbacks from the sdio bus"), the MMC core used to call into the power
management functions of SDIO clients itself and removed the card if the
return code was non-zero. IOW, the mmc handled errors gracefully and didn't
upchain them to the pm core.

Since this change, the mmc core relies on generic power management
functions which treat all errors as a reason to cancel the suspend
immediately. This causes suspend attempts to fail when the libertas
driver is loaded.

To fix this, power down the card explicitly in if_sdio_suspend() when we
know we're about to lose power and return success. Also set a flag in these
cases, and power up the card again in if_sdio_resume().

Fixes: 573185cc7e64 ("mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus")
Cc: <stable@vger.kernel.org>
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Chris Ball <chris@printf.net>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/wireless/marvell/libertas/dev.h     |    1 
 drivers/net/wireless/marvell/libertas/if_sdio.c |   30 +++++++++++++++++++-----
 2 files changed, 25 insertions(+), 6 deletions(-)

--- a/drivers/net/wireless/marvell/libertas/dev.h
+++ b/drivers/net/wireless/marvell/libertas/dev.h
@@ -104,6 +104,7 @@ struct lbs_private {
 	u8 fw_ready;
 	u8 surpriseremoved;
 	u8 setup_fw_on_resume;
+	u8 power_up_on_resume;
 	int (*hw_host_to_card) (struct lbs_private *priv, u8 type, u8 *payload, u16 nb);
 	void (*reset_card) (struct lbs_private *priv);
 	int (*power_save) (struct lbs_private *priv);
--- a/drivers/net/wireless/marvell/libertas/if_sdio.c
+++ b/drivers/net/wireless/marvell/libertas/if_sdio.c
@@ -1290,15 +1290,23 @@ static void if_sdio_remove(struct sdio_f
 static int if_sdio_suspend(struct device *dev)
 {
 	struct sdio_func *func = dev_to_sdio_func(dev);
-	int ret;
 	struct if_sdio_card *card = sdio_get_drvdata(func);
+	struct lbs_private *priv = card->priv;
+	int ret;
 
 	mmc_pm_flag_t flags = sdio_get_host_pm_caps(func);
+	priv->power_up_on_resume = false;
 
 	/* If we're powered off anyway, just let the mmc layer remove the
 	 * card. */
-	if (!lbs_iface_active(card->priv))
-		return -ENOSYS;
+	if (!lbs_iface_active(priv)) {
+		if (priv->fw_ready) {
+			priv->power_up_on_resume = true;
+			if_sdio_power_off(card);
+		}
+
+		return 0;
+	}
 
 	dev_info(dev, "%s: suspend: PM flags = 0x%x\n",
 		 sdio_func_id(func), flags);
@@ -1306,9 +1314,14 @@ static int if_sdio_suspend(struct device
 	/* If we aren't being asked to wake on anything, we should bail out
 	 * and let the SD stack power down the card.
 	 */
-	if (card->priv->wol_criteria == EHS_REMOVE_WAKEUP) {
+	if (priv->wol_criteria == EHS_REMOVE_WAKEUP) {
 		dev_info(dev, "Suspend without wake params -- powering down card\n");
-		return -ENOSYS;
+		if (priv->fw_ready) {
+			priv->power_up_on_resume = true;
+			if_sdio_power_off(card);
+		}
+
+		return 0;
 	}
 
 	if (!(flags & MMC_PM_KEEP_POWER)) {
@@ -1321,7 +1334,7 @@ static int if_sdio_suspend(struct device
 	if (ret)
 		return ret;
 
-	ret = lbs_suspend(card->priv);
+	ret = lbs_suspend(priv);
 	if (ret)
 		return ret;
 
@@ -1336,6 +1349,11 @@ static int if_sdio_resume(struct device
 
 	dev_info(dev, "%s: resume: we're back\n", sdio_func_id(func));
 
+	if (card->priv->power_up_on_resume) {
+		if_sdio_power_on(card);
+		wait_event(card->pwron_waitq, card->priv->fw_ready);
+	}
+
 	ret = lbs_resume(card->priv);
 
 	return ret;

[PATCH 4.14 14/89] media: Revert "[media] tvp5150: fix pad format frame height"

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Javier Martinez Canillas <javierm@redhat.com>

commit 1831af092308aa5a59ae61e47494e441c8be6b93 upstream.

This reverts commit 0866df8dffd514185bfab0d205db76e4c02cf1e4.

The v4l uAPI documentation [0] makes clear that in the case of interlaced
video (i.e: field is V4L2_FIELD_ALTERNATE) the height refers to the number
of lines in the field and not the number of lines in the full frame (which
is twice the field height for interlaced formats).

So the original height calculation was correct, and it shouldn't had been
changed by the mentioned commit.

[0]:https://linuxtv.org/downloads/v4l-dvb-apis/uapi/v4l/subdev-formats.html

Fixes: 0866df8dffd5 ("[media] tvp5150: fix pad format frame height")

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Cc: <stable@vger.kernel.org>      # for v4.12 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/i2c/tvp5150.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -871,7 +871,7 @@ static int tvp5150_fill_fmt(struct v4l2_
 	f = &format->format;
 
 	f->width = decoder->rect.width;
-	f->height = decoder->rect.height;
+	f->height = decoder->rect.height / 2;
 
 	f->code = MEDIA_BUS_FMT_UYVY8_2X8;
 	f->field = V4L2_FIELD_ALTERNATE;

[PATCH 4.14 15/89] mailbox: xgene-slimpro: Fix potential NULL pointer dereference

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit 3512a18cbd8d09e22a790540cb9624c3c49827ba upstream.

There is a potential execution path in which function
platform_get_resource() returns NULL. If this happens,
we will end up having a NULL pointer dereference.

Fix this by replacing devm_ioremap with devm_ioremap_resource,
which has the NULL check and the memory region request.

This code was detected with the help of Coccinelle.

Cc: stable@vger.kernel.org
Fixes: f700e84f417b ("mailbox: Add support for APM X-Gene platform mailbox driver")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mailbox/mailbox-xgene-slimpro.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/mailbox/mailbox-xgene-slimpro.c
+++ b/drivers/mailbox/mailbox-xgene-slimpro.c
@@ -195,9 +195,9 @@ static int slimpro_mbox_probe(struct pla
 	platform_set_drvdata(pdev, ctx);
 
 	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	mb_base = devm_ioremap(&pdev->dev, regs->start, resource_size(regs));
-	if (!mb_base)
-		return -ENOMEM;
+	mb_base = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(mb_base))
+		return PTR_ERR(mb_base);
 
 	/* Setup mailbox links */
 	for (i = 0; i < MBOX_CNT; i++) {

[PATCH 4.14 16/89] Replace magic for trusting the secondary keyring with #define

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit 817aef260037f33ee0f44c17fe341323d3aebd6d upstream.

Replace the use of a magic number that indicates that verify_*_signature()
should use the secondary keyring with a symbol.

Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 certs/system_keyring.c                  |    3 ++-
 crypto/asymmetric_keys/pkcs7_key_type.c |    2 +-
 include/linux/verification.h            |    6 ++++++
 3 files changed, 9 insertions(+), 2 deletions(-)

--- a/certs/system_keyring.c
+++ b/certs/system_keyring.c
@@ -15,6 +15,7 @@
 #include <linux/cred.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/verification.h>
 #include <keys/asymmetric-type.h>
 #include <keys/system_keyring.h>
 #include <crypto/pkcs7.h>
@@ -230,7 +231,7 @@ int verify_pkcs7_signature(const void *d
 
 	if (!trusted_keys) {
 		trusted_keys = builtin_trusted_keys;
-	} else if (trusted_keys = (void *)1UL) {
+	} else if (trusted_keys = VERIFY_USE_SECONDARY_KEYRING) {
 #ifdef CONFIG_SECONDARY_TRUSTED_KEYRING
 		trusted_keys = secondary_trusted_keys;
 #else
--- a/crypto/asymmetric_keys/pkcs7_key_type.c
+++ b/crypto/asymmetric_keys/pkcs7_key_type.c
@@ -62,7 +62,7 @@ static int pkcs7_preparse(struct key_pre
 
 	return verify_pkcs7_signature(NULL, 0,
 				      prep->data, prep->datalen,
-				      (void *)1UL, usage,
+				      VERIFY_USE_SECONDARY_KEYRING, usage,
 				      pkcs7_view_content, prep);
 }
 
--- a/include/linux/verification.h
+++ b/include/linux/verification.h
@@ -13,6 +13,12 @@
 #define _LINUX_VERIFICATION_H
 
 /*
+ * Indicate that both builtin trusted keys and secondary trusted keys
+ * should be used.
+ */
+#define VERIFY_USE_SECONDARY_KEYRING ((struct key *)1UL)
+
+/*
  * The use to which an asymmetric key is being put.
  */
 enum key_being_used_for {

[PATCH 4.14 16/89] Replace magic for trusting the secondary keyring with #define

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit 817aef260037f33ee0f44c17fe341323d3aebd6d upstream.

Replace the use of a magic number that indicates that verify_*_signature()
should use the secondary keyring with a symbol.

Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 certs/system_keyring.c                  |    3 ++-
 crypto/asymmetric_keys/pkcs7_key_type.c |    2 +-
 include/linux/verification.h            |    6 ++++++
 3 files changed, 9 insertions(+), 2 deletions(-)

--- a/certs/system_keyring.c
+++ b/certs/system_keyring.c
@@ -15,6 +15,7 @@
 #include <linux/cred.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/verification.h>
 #include <keys/asymmetric-type.h>
 #include <keys/system_keyring.h>
 #include <crypto/pkcs7.h>
@@ -230,7 +231,7 @@ int verify_pkcs7_signature(const void *d
 
 	if (!trusted_keys) {
 		trusted_keys = builtin_trusted_keys;
-	} else if (trusted_keys == (void *)1UL) {
+	} else if (trusted_keys == VERIFY_USE_SECONDARY_KEYRING) {
 #ifdef CONFIG_SECONDARY_TRUSTED_KEYRING
 		trusted_keys = secondary_trusted_keys;
 #else
--- a/crypto/asymmetric_keys/pkcs7_key_type.c
+++ b/crypto/asymmetric_keys/pkcs7_key_type.c
@@ -62,7 +62,7 @@ static int pkcs7_preparse(struct key_pre
 
 	return verify_pkcs7_signature(NULL, 0,
 				      prep->data, prep->datalen,
-				      (void *)1UL, usage,
+				      VERIFY_USE_SECONDARY_KEYRING, usage,
 				      pkcs7_view_content, prep);
 }
 
--- a/include/linux/verification.h
+++ b/include/linux/verification.h
@@ -13,6 +13,12 @@
 #define _LINUX_VERIFICATION_H
 
 /*
+ * Indicate that both builtin trusted keys and secondary trusted keys
+ * should be used.
+ */
+#define VERIFY_USE_SECONDARY_KEYRING ((struct key *)1UL)
+
+/*
  * The use to which an asymmetric key is being put.
  */
 enum key_being_used_for {

[PATCH 4.14 16/89] Replace magic for trusting the secondary keyring with #define

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit 817aef260037f33ee0f44c17fe341323d3aebd6d upstream.

Replace the use of a magic number that indicates that verify_*_signature()
should use the secondary keyring with a symbol.

Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: keyrings at vger.kernel.org
Cc: linux-security-module at vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 certs/system_keyring.c                  |    3 ++-
 crypto/asymmetric_keys/pkcs7_key_type.c |    2 +-
 include/linux/verification.h            |    6 ++++++
 3 files changed, 9 insertions(+), 2 deletions(-)

--- a/certs/system_keyring.c
+++ b/certs/system_keyring.c
@@ -15,6 +15,7 @@
 #include <linux/cred.h>
 #include <linux/err.h>
 #include <linux/slab.h>
+#include <linux/verification.h>
 #include <keys/asymmetric-type.h>
 #include <keys/system_keyring.h>
 #include <crypto/pkcs7.h>
@@ -230,7 +231,7 @@ int verify_pkcs7_signature(const void *d
 
 	if (!trusted_keys) {
 		trusted_keys = builtin_trusted_keys;
-	} else if (trusted_keys == (void *)1UL) {
+	} else if (trusted_keys == VERIFY_USE_SECONDARY_KEYRING) {
 #ifdef CONFIG_SECONDARY_TRUSTED_KEYRING
 		trusted_keys = secondary_trusted_keys;
 #else
--- a/crypto/asymmetric_keys/pkcs7_key_type.c
+++ b/crypto/asymmetric_keys/pkcs7_key_type.c
@@ -62,7 +62,7 @@ static int pkcs7_preparse(struct key_pre
 
 	return verify_pkcs7_signature(NULL, 0,
 				      prep->data, prep->datalen,
-				      (void *)1UL, usage,
+				      VERIFY_USE_SECONDARY_KEYRING, usage,
 				      pkcs7_view_content, prep);
 }
 
--- a/include/linux/verification.h
+++ b/include/linux/verification.h
@@ -13,6 +13,12 @@
 #define _LINUX_VERIFICATION_H
 
 /*
+ * Indicate that both builtin trusted keys and secondary trusted keys
+ * should be used.
+ */
+#define VERIFY_USE_SECONDARY_KEYRING ((struct key *)1UL)
+
+/*
  * The use to which an asymmetric key is being put.
  */
 enum key_being_used_for {

[PATCH 4.14 17/89] Fix kexec forbidding kernels signed with keys in the secondary keyring to boot

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit ea93102f32244e3f45c8b26260be77ed0cc1d16c upstream.

The split of .system_keyring into .builtin_trusted_keys and
.secondary_trusted_keys broke kexec, thereby preventing kernels signed by
keys which are now in the secondary keyring from being kexec'd.

Fix this by passing VERIFY_USE_SECONDARY_KEYRING to
verify_pefile_signature().

Fixes: d3bfe84129f6 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/kexec-bzimage64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -532,7 +532,7 @@ static int bzImage64_cleanup(void *loade
 static int bzImage64_verify_sig(const char *kernel, unsigned long kernel_len)
 {
 	return verify_pefile_signature(kernel, kernel_len,
-				       NULL,
+				       VERIFY_USE_SECONDARY_KEYRING,
 				       VERIFYING_KEXEC_PE_SIGNATURE);
 }
 #endif

[PATCH 4.14 17/89] Fix kexec forbidding kernels signed with keys in the secondary keyring to boot

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit ea93102f32244e3f45c8b26260be77ed0cc1d16c upstream.

The split of .system_keyring into .builtin_trusted_keys and
.secondary_trusted_keys broke kexec, thereby preventing kernels signed by
keys which are now in the secondary keyring from being kexec'd.

Fix this by passing VERIFY_USE_SECONDARY_KEYRING to
verify_pefile_signature().

Fixes: d3bfe84129f6 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/kexec-bzimage64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -532,7 +532,7 @@ static int bzImage64_cleanup(void *loade
 static int bzImage64_verify_sig(const char *kernel, unsigned long kernel_len)
 {
 	return verify_pefile_signature(kernel, kernel_len,
-				       NULL,
+				       VERIFY_USE_SECONDARY_KEYRING,
 				       VERIFYING_KEXEC_PE_SIGNATURE);
 }
 #endif

[PATCH 4.14 17/89] Fix kexec forbidding kernels signed with keys in the secondary keyring to boot

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit ea93102f32244e3f45c8b26260be77ed0cc1d16c upstream.

The split of .system_keyring into .builtin_trusted_keys and
.secondary_trusted_keys broke kexec, thereby preventing kernels signed by
keys which are now in the secondary keyring from being kexec'd.

Fix this by passing VERIFY_USE_SECONDARY_KEYRING to
verify_pefile_signature().

Fixes: d3bfe84129f6 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: kexec at lists.infradead.org
Cc: keyrings at vger.kernel.org
Cc: linux-security-module at vger.kernel.org
Cc: stable at kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/kexec-bzimage64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -532,7 +532,7 @@ static int bzImage64_cleanup(void *loade
 static int bzImage64_verify_sig(const char *kernel, unsigned long kernel_len)
 {
 	return verify_pefile_signature(kernel, kernel_len,
-				       NULL,
+				       VERIFY_USE_SECONDARY_KEYRING,
 				       VERIFYING_KEXEC_PE_SIGNATURE);
 }
 #endif

[PATCH 4.14 17/89] Fix kexec forbidding kernels signed with keys in the secondary keyring to boot

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yannik Sembritzki <yannik@sembritzki.me>

commit ea93102f32244e3f45c8b26260be77ed0cc1d16c upstream.

The split of .system_keyring into .builtin_trusted_keys and
.secondary_trusted_keys broke kexec, thereby preventing kernels signed by
keys which are now in the secondary keyring from being kexec'd.

Fix this by passing VERIFY_USE_SECONDARY_KEYRING to
verify_pefile_signature().

Fixes: d3bfe84129f6 ("certs: Add a secondary system keyring that can be added to dynamically")
Signed-off-by: Yannik Sembritzki <yannik@sembritzki.me>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: kexec@lists.infradead.org
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/kexec-bzimage64.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/kexec-bzimage64.c
+++ b/arch/x86/kernel/kexec-bzimage64.c
@@ -532,7 +532,7 @@ static int bzImage64_cleanup(void *loade
 static int bzImage64_verify_sig(const char *kernel, unsigned long kernel_len)
 {
 	return verify_pefile_signature(kernel, kernel_len,
-				       NULL,
+				       VERIFY_USE_SECONDARY_KEYRING,
 				       VERIFYING_KEXEC_PE_SIGNATURE);
 }
 #endif



_______________________________________________
kexec mailing list
kexec@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kexec

[PATCH 4.14 18/89] powerpc/fadump: handle crash memory ranges array index overflow

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hari Bathini <hbathini@linux.ibm.com>

commit 1bd6a1c4b80a28d975287630644e6b47d0f977a5 upstream.

Crash memory ranges is an array of memory ranges of the crashing kernel
to be exported as a dump via /proc/vmcore file. The size of the array
is set based on INIT_MEMBLOCK_REGIONS, which works alright in most cases
where memblock memory regions count is less than INIT_MEMBLOCK_REGIONS
value. But this count can grow beyond INIT_MEMBLOCK_REGIONS value since
commit 142b45a72e22 ("memblock: Add array resizing support").

On large memory systems with a few DLPAR operations, the memblock memory
regions count could be larger than INIT_MEMBLOCK_REGIONS value. On such
systems, registering fadump results in crash or other system failures
like below:

  task: c00007f39a290010 ti: c00000000b738000 task.ti: c00000000b738000
  NIP: c000000000047df4 LR: c0000000000f9e58 CTR: c00000000010f180
  REGS: c00000000b73b570 TRAP: 0300   Tainted: G          L   X  (4.4.140+)
  MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 22004484  XER: 20000000
  CFAR: c000000000008500 DAR: 000007a450000000 DSISR: 40000000 SOFTE: 0
  ...
  NIP [c000000000047df4] smp_send_reschedule+0x24/0x80
  LR [c0000000000f9e58] resched_curr+0x138/0x160
  Call Trace:
    resched_curr+0x138/0x160 (unreliable)
    check_preempt_curr+0xc8/0xf0
    ttwu_do_wakeup+0x38/0x150
    try_to_wake_up+0x224/0x4d0
    __wake_up_common+0x94/0x100
    ep_poll_callback+0xac/0x1c0
    __wake_up_common+0x94/0x100
    __wake_up_sync_key+0x70/0xa0
    sock_def_readable+0x58/0xa0
    unix_stream_sendmsg+0x2dc/0x4c0
    sock_sendmsg+0x68/0xa0
    ___sys_sendmsg+0x2cc/0x2e0
    __sys_sendmsg+0x5c/0xc0
    SyS_socketcall+0x36c/0x3f0
    system_call+0x3c/0x100

as array index overflow is not checked for while setting up crash memory
ranges causing memory corruption. To resolve this issue, dynamically
allocate memory for crash memory ranges and resize it incrementally,
in units of pagesize, on hitting array size limit.

Fixes: 2df173d9e85d ("fadump: Initialize elfcore header and add PT_LOAD program headers.")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
[mpe: Just use PAGE_SIZE directly, fixup variable placement]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/include/asm/fadump.h |    3 -
 arch/powerpc/kernel/fadump.c      |   91 ++++++++++++++++++++++++++++++++------
 2 files changed, 77 insertions(+), 17 deletions(-)

--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -195,9 +195,6 @@ struct fadump_crash_info_header {
 	struct cpumask	online_mask;
 };
 
-/* Crash memory ranges */
-#define INIT_CRASHMEM_RANGES	(INIT_MEMBLOCK_REGIONS + 2)
-
 struct fad_crash_memory_ranges {
 	unsigned long long	base;
 	unsigned long long	size;
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -47,8 +47,10 @@ static struct fadump_mem_struct fdm;
 static const struct fadump_mem_struct *fdm_active;
 
 static DEFINE_MUTEX(fadump_mutex);
-struct fad_crash_memory_ranges crash_memory_ranges[INIT_CRASHMEM_RANGES];
+struct fad_crash_memory_ranges *crash_memory_ranges;
+int crash_memory_ranges_size;
 int crash_mem_ranges;
+int max_crash_mem_ranges;
 
 /* Scan the Firmware Assisted dump configuration details. */
 int __init early_init_dt_scan_fw_dump(unsigned long node,
@@ -843,38 +845,88 @@ static int __init process_fadump(const s
 	return 0;
 }
 
-static inline void fadump_add_crash_memory(unsigned long long base,
-					unsigned long long end)
+static void free_crash_memory_ranges(void)
+{
+	kfree(crash_memory_ranges);
+	crash_memory_ranges = NULL;
+	crash_memory_ranges_size = 0;
+	max_crash_mem_ranges = 0;
+}
+
+/*
+ * Allocate or reallocate crash memory ranges array in incremental units
+ * of PAGE_SIZE.
+ */
+static int allocate_crash_memory_ranges(void)
+{
+	struct fad_crash_memory_ranges *new_array;
+	u64 new_size;
+
+	new_size = crash_memory_ranges_size + PAGE_SIZE;
+	pr_debug("Allocating %llu bytes of memory for crash memory ranges\n",
+		 new_size);
+
+	new_array = krealloc(crash_memory_ranges, new_size, GFP_KERNEL);
+	if (new_array == NULL) {
+		pr_err("Insufficient memory for setting up crash memory ranges\n");
+		free_crash_memory_ranges();
+		return -ENOMEM;
+	}
+
+	crash_memory_ranges = new_array;
+	crash_memory_ranges_size = new_size;
+	max_crash_mem_ranges = (new_size /
+				sizeof(struct fad_crash_memory_ranges));
+	return 0;
+}
+
+static inline int fadump_add_crash_memory(unsigned long long base,
+					  unsigned long long end)
 {
 	if (base == end)
-		return;
+		return 0;
+
+	if (crash_mem_ranges == max_crash_mem_ranges) {
+		int ret;
+
+		ret = allocate_crash_memory_ranges();
+		if (ret)
+			return ret;
+	}
 
 	pr_debug("crash_memory_range[%d] [%#016llx-%#016llx], %#llx bytes\n",
 		crash_mem_ranges, base, end - 1, (end - base));
 	crash_memory_ranges[crash_mem_ranges].base = base;
 	crash_memory_ranges[crash_mem_ranges].size = end - base;
 	crash_mem_ranges++;
+	return 0;
 }
 
-static void fadump_exclude_reserved_area(unsigned long long start,
+static int fadump_exclude_reserved_area(unsigned long long start,
 					unsigned long long end)
 {
 	unsigned long long ra_start, ra_end;
+	int ret = 0;
 
 	ra_start = fw_dump.reserve_dump_area_start;
 	ra_end = ra_start + fw_dump.reserve_dump_area_size;
 
 	if ((ra_start < end) && (ra_end > start)) {
 		if ((start < ra_start) && (end > ra_end)) {
-			fadump_add_crash_memory(start, ra_start);
-			fadump_add_crash_memory(ra_end, end);
+			ret = fadump_add_crash_memory(start, ra_start);
+			if (ret)
+				return ret;
+
+			ret = fadump_add_crash_memory(ra_end, end);
 		} else if (start < ra_start) {
-			fadump_add_crash_memory(start, ra_start);
+			ret = fadump_add_crash_memory(start, ra_start);
 		} else if (ra_end < end) {
-			fadump_add_crash_memory(ra_end, end);
+			ret = fadump_add_crash_memory(ra_end, end);
 		}
 	} else
-		fadump_add_crash_memory(start, end);
+		ret = fadump_add_crash_memory(start, end);
+
+	return ret;
 }
 
 static int fadump_init_elfcore_header(char *bufp)
@@ -914,10 +966,11 @@ static int fadump_init_elfcore_header(ch
  * Traverse through memblock structure and setup crash memory ranges. These
  * ranges will be used create PT_LOAD program headers in elfcore header.
  */
-static void fadump_setup_crash_memory_ranges(void)
+static int fadump_setup_crash_memory_ranges(void)
 {
 	struct memblock_region *reg;
 	unsigned long long start, end;
+	int ret;
 
 	pr_debug("Setup crash memory ranges.\n");
 	crash_mem_ranges = 0;
@@ -928,7 +981,9 @@ static void fadump_setup_crash_memory_ra
 	 * specified during fadump registration. We need to create a separate
 	 * program header for this chunk with the correct offset.
 	 */
-	fadump_add_crash_memory(RMA_START, fw_dump.boot_memory_size);
+	ret = fadump_add_crash_memory(RMA_START, fw_dump.boot_memory_size);
+	if (ret)
+		return ret;
 
 	for_each_memblock(memory, reg) {
 		start = (unsigned long long)reg->base;
@@ -948,8 +1003,12 @@ static void fadump_setup_crash_memory_ra
 		}
 
 		/* add this range excluding the reserved dump area. */
-		fadump_exclude_reserved_area(start, end);
+		ret = fadump_exclude_reserved_area(start, end);
+		if (ret)
+			return ret;
 	}
+
+	return 0;
 }
 
 /*
@@ -1072,6 +1131,7 @@ static int register_fadump(void)
 {
 	unsigned long addr;
 	void *vaddr;
+	int ret;
 
 	/*
 	 * If no memory is reserved then we can not register for firmware-
@@ -1080,7 +1140,9 @@ static int register_fadump(void)
 	if (!fw_dump.reserve_dump_area_size)
 		return -ENODEV;
 
-	fadump_setup_crash_memory_ranges();
+	ret = fadump_setup_crash_memory_ranges();
+	if (ret)
+		return ret;
 
 	addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
 	/* Initialize fadump crash info header. */
@@ -1158,6 +1220,7 @@ void fadump_cleanup(void)
 	} else if (fw_dump.dump_registered) {
 		/* Un-register Firmware-assisted dump if it was registered. */
 		fadump_unregister_dump(&fdm);
+		free_crash_memory_ranges();
 	}
 }
 

[PATCH 4.14 19/89] powerpc/pseries: Fix endianness while restoring of r3 in MCE handler.

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>

commit cd813e1cd7122f2c261dce5b54d1e0c97f80e1a5 upstream.

During Machine Check interrupt on pseries platform, register r3 points
RTAS extended event log passed by hypervisor. Since hypervisor uses r3
to pass pointer to rtas log, it stores the original r3 value at the
start of the memory (first 8 bytes) pointed by r3. Since hypervisor
stores this info and rtas log is in BE format, linux should make
sure to restore r3 value in correct endian format.

Without this patch when MCE handler, after recovery, returns to code that
that caused the MCE may end up with Data SLB access interrupt for invalid
address followed by kernel panic or hang.

  Severe Machine check interrupt [Recovered]
    NIP [d00000000ca301b8]: init_module+0x1b8/0x338 [bork_kernel]
    Initiator: CPU
    Error type: SLB [Multihit]
      Effective address: d00000000ca70000
  cpu 0xa: Vector: 380 (Data SLB Access) at [c0000000fc7775b0]
      pc: c0000000009694c0: vsnprintf+0x80/0x480
      lr: c0000000009698e0: vscnprintf+0x20/0x60
      sp: c0000000fc777830
     msr: 8000000002009033
     dar: a803a30c000000d0
    current = 0xc00000000bc9ef00
    paca    = 0xc00000001eca5c00	 softe: 3	 irq_happened: 0x01
      pid   = 8860, comm = insmod
  vscnprintf+0x20/0x60
  vprintk_emit+0xb4/0x4b0
  vprintk_func+0x5c/0xd0
  printk+0x38/0x4c
  init_module+0x1c0/0x338 [bork_kernel]
  do_one_initcall+0x54/0x230
  do_init_module+0x8c/0x248
  load_module+0x12b8/0x15b0
  sys_finit_module+0xa8/0x110
  system_call+0x58/0x6c
  --- Exception: c00 (System Call) at 00007fff8bda0644
  SP (7fffdfbfe980) is in userspace

This patch fixes this issue.

Fixes: a08a53ea4c97 ("powerpc/le: Enable RTAS events support")
Cc: stable@vger.kernel.org # v3.15+
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/pseries/ras.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -360,7 +360,7 @@ static struct rtas_error_log *fwnmi_get_
 	}
 
 	savep = __va(regs->gpr[3]);
-	regs->gpr[3] = savep[0];	/* restore original r3 */
+	regs->gpr[3] = be64_to_cpu(savep[0]);	/* restore original r3 */
 
 	/* If it isn't an extended log we can use the per cpu 64bit buffer */
 	h = (struct rtas_error_log *)&savep[1];

[PATCH 4.14 20/89] powerpc/powernv/pci: Work around races in PCI bridge enabling

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Benjamin Herrenschmidt <benh@kernel.crashing.org>

commit db2173198b9513f7add8009f225afa1f1c79bcc6 upstream.

The generic code is racy when multiple children of a PCI bridge try to
enable it simultaneously.

This leads to drivers trying to access a device through a
not-yet-enabled bridge, and this EEH errors under various
circumstances when using parallel driver probing.

There is work going on to fix that properly in the PCI core but it
will take some time.

x86 gets away with it because (outside of hotplug), the BIOS enables
all the bridges at boot time.

This patch does the same thing on powernv by enabling all bridges that
have child devices at boot time, thus avoiding subsequent races. It's
suitable for backporting to stable and distros, while the proper PCI
fix will probably be significantly more invasive.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: stable@vger.kernel.org
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/platforms/powernv/pci-ioda.c |   37 ++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -3286,12 +3286,49 @@ static void pnv_pci_ioda_create_dbgfs(vo
 #endif /* CONFIG_DEBUG_FS */
 }
 
+static void pnv_pci_enable_bridge(struct pci_bus *bus)
+{
+	struct pci_dev *dev = bus->self;
+	struct pci_bus *child;
+
+	/* Empty bus ? bail */
+	if (list_empty(&bus->devices))
+		return;
+
+	/*
+	 * If there's a bridge associated with that bus enable it. This works
+	 * around races in the generic code if the enabling is done during
+	 * parallel probing. This can be removed once those races have been
+	 * fixed.
+	 */
+	if (dev) {
+		int rc = pci_enable_device(dev);
+		if (rc)
+			pci_err(dev, "Error enabling bridge (%d)\n", rc);
+		pci_set_master(dev);
+	}
+
+	/* Perform the same to child busses */
+	list_for_each_entry(child, &bus->children, node)
+		pnv_pci_enable_bridge(child);
+}
+
+static void pnv_pci_enable_bridges(void)
+{
+	struct pci_controller *hose;
+
+	list_for_each_entry(hose, &hose_list, list_node)
+		pnv_pci_enable_bridge(hose->bus);
+}
+
 static void pnv_pci_ioda_fixup(void)
 {
 	pnv_pci_ioda_setup_PEs();
 	pnv_pci_ioda_setup_iommu_api();
 	pnv_pci_ioda_create_dbgfs();
 
+	pnv_pci_enable_bridges();
+
 #ifdef CONFIG_EEH
 	eeh_init();
 	eeh_addr_cache_build();

[PATCH 4.14 21/89] cxl: Fix wrong comparison in cxl_adapter_context_get()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vaibhav Jain <vaibhav@linux.ibm.com>

commit ef6cb5f1a048fdf91ccee6d63d2bfa293338502d upstream.

Function atomic_inc_unless_negative() returns a bool to indicate
success/failure. However cxl_adapter_context_get() wrongly compares
the return value against '>=0' which will always be true. The patch
fixes this comparison to '==0' there by also fixing this compile time
warning:

	drivers/misc/cxl/main.c:290 cxl_adapter_context_get()
	warn: 'atomic_inc_unless_negative(&adapter->contexts_num)' is unsigned

Fixes: 70b565bbdb91 ("cxl: Prevent adapter reset if an active context exists")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/cxl/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/misc/cxl/main.c
+++ b/drivers/misc/cxl/main.c
@@ -287,7 +287,7 @@ int cxl_adapter_context_get(struct cxl *
 	int rc;
 
 	rc = atomic_inc_unless_negative(&adapter->contexts_num);
-	return rc >= 0 ? 0 : -EBUSY;
+	return rc ? 0 : -EBUSY;
 }
 
 void cxl_adapter_context_put(struct cxl *adapter)

[PATCH 4.14 22/89] ib_srpt: Fix a use-after-free in srpt_close_ch()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@wdc.com>

commit 995250959d22fc341b5424e3343b0ce5df672461 upstream.

Avoid that KASAN reports the following:

BUG: KASAN: use-after-free in srpt_close_ch+0x4f/0x1b0 [ib_srpt]
Read of size 4 at addr ffff880151180cb8 by task check/4681

CPU: 15 PID: 4681 Comm: check Not tainted 4.18.0-rc2-dbg+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0xa4/0xf5
 print_address_description+0x6f/0x270
 kasan_report+0x241/0x360
 __asan_load4+0x78/0x80
 srpt_close_ch+0x4f/0x1b0 [ib_srpt]
 srpt_set_enabled+0xf7/0x1e0 [ib_srpt]
 srpt_tpg_enable_store+0xb8/0x120 [ib_srpt]
 configfs_write_file+0x14e/0x1d0 [configfs]
 __vfs_write+0xd2/0x3b0
 vfs_write+0x101/0x270
 ksys_write+0xab/0x120
 __x64_sys_write+0x43/0x50
 do_syscall_64+0x77/0x230
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: aaf45bd83eba ("IB/srpt: Detect session shutdown reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/ulp/srpt/ib_srpt.c |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/infiniband/ulp/srpt/ib_srpt.c
+++ b/drivers/infiniband/ulp/srpt/ib_srpt.c
@@ -1713,8 +1713,7 @@ static bool srpt_close_ch(struct srpt_rd
 	int ret;
 
 	if (!srpt_set_ch_state(ch, CH_DRAINING)) {
-		pr_debug("%s-%d: already closed\n", ch->sess_name,
-			 ch->qp->qp_num);
+		pr_debug("%s: already closed\n", ch->sess_name);
 		return false;
 	}
 

[PATCH 4.14 23/89] RDMA/rxe: Set wqe->status correctly if an unexpected response is received

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bart Van Assche <bart.vanassche@wdc.com>

commit 61b717d041b1976530f68f8b539b2e3a7dd8e39c upstream.

Every function that returns COMPST_ERROR must set wqe->status to another
value than IB_WC_SUCCESS before returning COMPST_ERROR. Fix the only code
path for which this is not yet the case.

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/infiniband/sw/rxe/rxe_comp.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/sw/rxe/rxe_comp.c
+++ b/drivers/infiniband/sw/rxe/rxe_comp.c
@@ -276,6 +276,7 @@ static inline enum comp_state check_ack(
 	case IB_OPCODE_RC_RDMA_READ_RESPONSE_MIDDLE:
 		if (wqe->wr.opcode != IB_WR_RDMA_READ &&
 		    wqe->wr.opcode != IB_WR_RDMA_READ_WITH_INV) {
+			wqe->status = IB_WC_FATAL_ERR;
 			return COMPST_ERROR;
 		}
 		reset_retry_counters(qp);

[PATCH 4.14 24/89] 9p: fix multiple NULL-pointer-dereferences

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Bortoli <tomasbortoli@gmail.com>

commit 10aa14527f458e9867cf3d2cc6b8cb0f6704448b upstream.

Added checks to prevent GPFs from raising.

Link: http://lkml.kernel.org/r/20180727110558.5479-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+1a262da37d3bead15c39@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/9p/trans_fd.c     |    5 ++++-
 net/9p/trans_rdma.c   |    3 +++
 net/9p/trans_virtio.c |    3 +++
 net/9p/trans_xen.c    |    3 +++
 4 files changed, 13 insertions(+), 1 deletion(-)

--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -951,7 +951,7 @@ p9_fd_create_tcp(struct p9_client *clien
 	if (err < 0)
 		return err;
 
-	if (valid_ipaddr4(addr) < 0)
+	if (addr == NULL || valid_ipaddr4(addr) < 0)
 		return -EINVAL;
 
 	csocket = NULL;
@@ -1001,6 +1001,9 @@ p9_fd_create_unix(struct p9_client *clie
 
 	csocket = NULL;
 
+	if (addr == NULL)
+		return -EINVAL;
+
 	if (strlen(addr) >= UNIX_PATH_MAX) {
 		pr_err("%s (%d): address too long: %s\n",
 		       __func__, task_pid_nr(current), addr);
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -646,6 +646,9 @@ rdma_create_trans(struct p9_client *clie
 	struct rdma_conn_param conn_param;
 	struct ib_qp_init_attr qp_attr;
 
+	if (addr == NULL)
+		return -EINVAL;
+
 	/* Parse the transport specific mount options */
 	err = parse_opts(args, &opts);
 	if (err < 0)
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -650,6 +650,9 @@ p9_virtio_create(struct p9_client *clien
 	int ret = -ENOENT;
 	int found = 0;
 
+	if (devname == NULL)
+		return -EINVAL;
+
 	mutex_lock(&virtio_9p_lock);
 	list_for_each_entry(chan, &virtio_chan_list, chan_list) {
 		if (!strncmp(devname, chan->tag, chan->tag_len) &&
--- a/net/9p/trans_xen.c
+++ b/net/9p/trans_xen.c
@@ -95,6 +95,9 @@ static int p9_xen_create(struct p9_clien
 {
 	struct xen_9pfs_front_priv *priv;
 
+	if (addr == NULL)
+		return -EINVAL;
+
 	read_lock(&xen_9pfs_lock);
 	list_for_each_entry(priv, &xen_9pfs_devs, list) {
 		if (!strcmp(priv->tag, addr)) {

[PATCH 4.14 25/89] fs/9p/xattr.c: catch the error of p9_client_clunk when setting xattr failed

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: piaojun <piaojun@huawei.com>

commit 3111784bee81591ea2815011688d28b65df03627 upstream.

In my testing, v9fs_fid_xattr_set will return successfully even if the
backend ext4 filesystem has no space to store xattr key-value. That will
cause inconsistent behavior between front end and back end. The reason is
that lsetxattr will be triggered by p9_client_clunk, and unfortunately we
did not catch the error. This patch will catch the error to notify upper
caller.

p9_client_clunk (in 9p)
  p9_client_rpc(clnt, P9_TCLUNK, "d", fid->fid);
    v9fs_clunk (in qemu)
      put_fid
        free_fid
          v9fs_xattr_fid_clunk
            v9fs_co_lsetxattr
              s->ops->lsetxattr
                ext4_xattr_user_set (in host ext4 filesystem)

Link: http://lkml.kernel.org/r/5B57EACC.2060900@huawei.com
Signed-off-by: Jun Piao <piaojun@huawei.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/9p/xattr.c |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/fs/9p/xattr.c
+++ b/fs/9p/xattr.c
@@ -105,7 +105,7 @@ int v9fs_fid_xattr_set(struct p9_fid *fi
 {
 	struct kvec kvec = {.iov_base = (void *)value, .iov_len = value_len};
 	struct iov_iter from;
-	int retval;
+	int retval, err;
 
 	iov_iter_kvec(&from, WRITE | ITER_KVEC, &kvec, 1, value_len);
 
@@ -126,7 +126,9 @@ int v9fs_fid_xattr_set(struct p9_fid *fi
 			 retval);
 	else
 		p9_client_write(fid, 0, &from, &retval);
-	p9_client_clunk(fid);
+	err = p9_client_clunk(fid);
+	if (!retval && err)
+		retval = err;
 	return retval;
 }
 

[PATCH 4.14 26/89] 9p/virtio: fix off-by-one error in sg list bounds check

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: jiangyiwen <jiangyiwen@huawei.com>

commit 23cba9cbde0bba05d772b335fe5f66aa82b9ad19 upstream.

Because the value of limit is VIRTQUEUE_NUM, if index is equal to
limit, it will cause sg array out of bounds, so correct the judgement
of BUG_ON.

Link: http://lkml.kernel.org/r/5B63D5F6.6080109@huawei.com
Signed-off-by: Yiwen Jiang <jiangyiwen@huawei.com>
Reported-By: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Jun Piao <piaojun@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/9p/trans_virtio.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -189,7 +189,7 @@ static int pack_sg_list(struct scatterli
 		s = rest_of_page(data);
 		if (s > count)
 			s = count;
-		BUG_ON(index > limit);
+		BUG_ON(index >= limit);
 		/* Make sure we don't terminate early. */
 		sg_unmark_end(&sg[index]);
 		sg_set_buf(&sg[index++], data, s);
@@ -234,6 +234,7 @@ pack_sg_list_p(struct scatterlist *sg, i
 		s = PAGE_SIZE - data_off;
 		if (s > count)
 			s = count;
+		BUG_ON(index >= limit);
 		/* Make sure we don't terminate early. */
 		sg_unmark_end(&sg[index]);
 		sg_set_page(&sg[index++], pdata[i++], s, data_off);

[PATCH 4.14 27/89] net/9p/client.c: version pointer uninitialized

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Bortoli <tomasbortoli@gmail.com>

commit 7913690dcc5e18e235769fd87c34143072f5dbea upstream.

The p9_client_version() does not initialize the version pointer. If the
call to p9pdu_readf() returns an error and version has not been allocated
in p9pdu_readf(), then the program will jump to the "error" label and will
try to free the version pointer. If version is not initialized, free()
will be called with uninitialized, garbage data and will provoke a crash.

Link: http://lkml.kernel.org/r/20180709222943.19503-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+65c6b72f284a39d416b4@syzkaller.appspotmail.com
Reviewed-by: Jun Piao <piaojun@huawei.com>
Reviewed-by: Yiwen Jiang <jiangyiwen@huawei.com>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Ron Minnich <rminnich@sandia.gov>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/9p/client.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -955,7 +955,7 @@ static int p9_client_version(struct p9_c
 {
 	int err = 0;
 	struct p9_req_t *req;
-	char *version;
+	char *version = NULL;
 	int msize;
 
 	p9_debug(P9_DEBUG_9P, ">>> TVERSION msize %d protocol %d\n",

[PATCH 4.14 28/89] net/9p/trans_fd.c: fix race-condition by flushing workqueue before the kfree()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tomas Bortoli <tomasbortoli@gmail.com>

commit 430ac66eb4c5b5c4eb846b78ebf65747510b30f1 upstream.

The patch adds the flush in p9_mux_poll_stop() as it the function used by
p9_conn_destroy(), in turn called by p9_fd_close() to stop the async
polling associated with the data regarding the connection.

Link: http://lkml.kernel.org/r/20180720092730.27104-1-tomasbortoli@gmail.com
Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+39749ed7d9ef6dfb23f6@syzkaller.appspotmail.com
To: Eric Van Hensbergen <ericvh@gmail.com>
To: Ron Minnich <rminnich@sandia.gov>
To: Latchesar Ionkov <lucho@ionkov.net>
Cc: Yiwen Jiang <jiangyiwen@huwei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/9p/trans_fd.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -185,6 +185,8 @@ static void p9_mux_poll_stop(struct p9_c
 	spin_lock_irqsave(&p9_poll_lock, flags);
 	list_del_init(&m->poll_pending_link);
 	spin_unlock_irqrestore(&p9_poll_lock, flags);
+
+	flush_work(&p9_poll_work);
 }
 
 /**

[PATCH 4.14 29/89] dm integrity: change suspending variable from bool to int

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit c21b16392701543d61e366dca84e15fe7f0cf0cf upstream.

Early alpha processors can't write a byte or short atomically - they
read 8 bytes, modify the byte or two bytes in registers and write back
8 bytes.

The modification of the variable "suspending" may race with
modification of the variable "failed".  Fix this by changing
"suspending" to an int.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-integrity.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-integrity.c
+++ b/drivers/md/dm-integrity.c
@@ -177,7 +177,7 @@ struct dm_integrity_c {
 	__u8 sectors_per_block;
 
 	unsigned char mode;
-	bool suspending;
+	int suspending;
 
 	int failed;
 
@@ -2209,7 +2209,7 @@ static void dm_integrity_postsuspend(str
 
 	del_timer_sync(&ic->autocommit_timer);
 
-	ic->suspending = true;
+	WRITE_ONCE(ic->suspending, 1);
 
 	queue_work(ic->commit_wq, &ic->commit_work);
 	drain_workqueue(ic->commit_wq);
@@ -2219,7 +2219,7 @@ static void dm_integrity_postsuspend(str
 		dm_integrity_flush_buffers(ic);
 	}
 
-	ic->suspending = false;
+	WRITE_ONCE(ic->suspending, 0);
 
 	BUG_ON(!RB_EMPTY_ROOT(&ic->in_progress));
 

[PATCH 4.14 30/89] dm thin: stop no_space_timeout worker when switching to write-mode

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hou Tao <houtao1@huawei.com>

commit 75294442d896f2767be34f75aca7cc2b0d01301f upstream.

Now both check_for_space() and do_no_space_timeout() will read & write
pool->pf.error_if_no_space.  If these functions run concurrently, as
shown in the following case, the default setting of "queue_if_no_space"
can get lost.

precondition:
    * error_if_no_space = false (aka "queue_if_no_space")
    * pool is in Out-of-Data-Space (OODS) mode
    * no_space_timeout worker has been queued

CPU 0:                          CPU 1:
// delete a thin device
process_delete_mesg()
// check_for_space() invoked by commit()
set_pool_mode(pool, PM_WRITE)
    pool->pf.error_if_no_space = \
     pt->requested_pf.error_if_no_space

				// timeout, pool is still in OODS mode
				do_no_space_timeout
				    // "queue_if_no_space" config is lost
				    pool->pf.error_if_no_space = true
    pool->pf.mode = new_mode

Fix it by stopping no_space_timeout worker when switching to write mode.

Fixes: bcc696fac11f ("dm thin: stay in out-of-data-space mode once no_space_timeout expires")
Cc: stable@vger.kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-thin.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/md/dm-thin.c
+++ b/drivers/md/dm-thin.c
@@ -2514,6 +2514,8 @@ static void set_pool_mode(struct pool *p
 	case PM_WRITE:
 		if (old_mode != new_mode)
 			notify_of_pool_mode_change(pool, "write");
+		if (old_mode == PM_OUT_OF_DATA_SPACE)
+			cancel_delayed_work_sync(&pool->no_space_timeout);
 		pool->out_of_data_space = false;
 		pool->pf.error_if_no_space = pt->requested_pf.error_if_no_space;
 		dm_pool_metadata_read_write(pool->pmd);

[PATCH 4.14 31/89] dm cache metadata: save in-core policy_hint_size to on-disk superblock

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mike Snitzer <snitzer@redhat.com>

commit fd2fa95416188a767a63979296fa3e169a9ef5ec upstream.

policy_hint_size starts as 0 during __write_initial_superblock().  It
isn't until the policy is loaded that policy_hint_size is set in-core
(cmd->policy_hint_size).  But it never got recorded in the on-disk
superblock because __commit_transaction() didn't deal with transfering
the in-core cmd->policy_hint_size to the on-disk superblock.

The in-core cmd->policy_hint_size gets initialized by metadata_open()'s
__begin_transaction_flags() which re-reads all superblock fields.
Because the superblock's policy_hint_size was never properly stored, when
the cache was created, hints_array_available() would always return false
when re-activating a previously created cache.  This means
__load_mappings() always considered the hints invalid and never made use
of the hints (these hints served to optimize).

Another detremental side-effect of this oversight is the cache_check
utility would fail with: "invalid hint width: 0"

Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-cache-metadata.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -362,7 +362,7 @@ static int __write_initial_superblock(st
 	disk_super->version = cpu_to_le32(cmd->version);
 	memset(disk_super->policy_name, 0, sizeof(disk_super->policy_name));
 	memset(disk_super->policy_version, 0, sizeof(disk_super->policy_version));
-	disk_super->policy_hint_size = 0;
+	disk_super->policy_hint_size = cpu_to_le32(0);
 
 	__copy_sm_root(cmd, disk_super);
 
@@ -700,6 +700,7 @@ static int __commit_transaction(struct d
 	disk_super->policy_version[0] = cpu_to_le32(cmd->policy_version[0]);
 	disk_super->policy_version[1] = cpu_to_le32(cmd->policy_version[1]);
 	disk_super->policy_version[2] = cpu_to_le32(cmd->policy_version[2]);
+	disk_super->policy_hint_size = cpu_to_le32(cmd->policy_hint_size);
 
 	disk_super->read_hits = cpu_to_le32(cmd->stats.read_hits);
 	disk_super->read_misses = cpu_to_le32(cmd->stats.read_misses);

[PATCH 4.14 32/89] dm cache metadata: set dirty on all cache blocks after a crash

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ilya Dryomov <idryomov@gmail.com>

commit 5b1fe7bec8a8d0cc547a22e7ddc2bd59acd67de4 upstream.

Quoting Documentation/device-mapper/cache.txt:

  The 'dirty' state for a cache block changes far too frequently for us
  to keep updating it on the fly.  So we treat it as a hint.  In normal
  operation it will be written when the dm device is suspended.  If the
  system crashes all cache blocks will be assumed dirty when restarted.

This got broken in commit f177940a8091 ("dm cache metadata: switch to
using the new cursor api for loading metadata") in 4.9, which removed
the code that consulted cmd->clean_when_opened (CLEAN_SHUTDOWN on-disk
flag) when loading cache blocks.  This results in data corruption on an
unclean shutdown with dirty cache blocks on the fast device.  After the
crash those blocks are considered clean and may get evicted from the
cache at any time.  This can be demonstrated by doing a lot of reads
to trigger individual evictions, but uncache is more predictable:

  ### Disable auto-activation in lvm.conf to be able to do uncache in
  ### time (i.e. see uncache doing flushing) when the fix is applied.

  # xfs_io -d -c 'pwrite -b 4M -S 0xaa 0 1G' /dev/vdb
  # vgcreate vg_cache /dev/vdb /dev/vdc
  # lvcreate -L 1G -n lv_slowdev vg_cache /dev/vdb
  # lvcreate -L 512M -n lv_cachedev vg_cache /dev/vdc
  # lvcreate -L 256M -n lv_metadev vg_cache /dev/vdc
  # lvconvert --type cache-pool --cachemode writeback vg_cache/lv_cachedev --poolmetadata vg_cache/lv_metadev
  # lvconvert --type cache vg_cache/lv_slowdev --cachepool vg_cache/lv_cachedev
  # xfs_io -d -c 'pwrite -b 4M -S 0xbb 0 512M' /dev/mapper/vg_cache-lv_slowdev
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  # dmsetup status vg_cache-lv_slowdev
  0 2097152 cache 8 27/65536 128 8192/8192 1 100 0 0 0 8192 7065 2 metadata2 writeback 2 migration_threshold 2048 smq 0 rw -
                                                            ^^^^
                                7065 * 64k = 441M yet to be written to the slow device
  # echo b >/proc/sysrq-trigger

  # vgchange -ay vg_cache
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  # lvconvert --uncache vg_cache/lv_slowdev
  Flushing 0 blocks for cache vg_cache/lv_slowdev.
  Logical volume "lv_cachedev" successfully removed
  Logical volume vg_cache/lv_slowdev is not cached.
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................
  0fe00010:  aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa  ................

This is the case with both v1 and v2 cache pool metatata formats.

After applying this patch:

  # vgchange -ay vg_cache
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  # lvconvert --uncache vg_cache/lv_slowdev
  Flushing 3724 blocks for cache vg_cache/lv_slowdev.
  ...
  Flushing 71 blocks for cache vg_cache/lv_slowdev.
  Logical volume "lv_cachedev" successfully removed
  Logical volume vg_cache/lv_slowdev is not cached.
  # xfs_io -d -c 'pread -v 254M 512' /dev/mapper/vg_cache-lv_slowdev | head -n 2
  0fe00000:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................
  0fe00010:  bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb  ................

Cc: stable@vger.kernel.org
Fixes: f177940a8091 ("dm cache metadata: switch to using the new cursor api for loading metadata")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-cache-metadata.c |   10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -1322,6 +1322,7 @@ static int __load_mapping_v1(struct dm_c
 
 	dm_oblock_t oblock;
 	unsigned flags;
+	bool dirty = true;
 
 	dm_array_cursor_get_value(mapping_cursor, (void **) &mapping_value_le);
 	memcpy(&mapping, mapping_value_le, sizeof(mapping));
@@ -1332,8 +1333,10 @@ static int __load_mapping_v1(struct dm_c
 			dm_array_cursor_get_value(hint_cursor, (void **) &hint_value_le);
 			memcpy(&hint, hint_value_le, sizeof(hint));
 		}
+		if (cmd->clean_when_opened)
+			dirty = flags & M_DIRTY;
 
-		r = fn(context, oblock, to_cblock(cb), flags & M_DIRTY,
+		r = fn(context, oblock, to_cblock(cb), dirty,
 		       le32_to_cpu(hint), hints_valid);
 		if (r) {
 			DMERR("policy couldn't load cache block %llu",
@@ -1361,7 +1364,7 @@ static int __load_mapping_v2(struct dm_c
 
 	dm_oblock_t oblock;
 	unsigned flags;
-	bool dirty;
+	bool dirty = true;
 
 	dm_array_cursor_get_value(mapping_cursor, (void **) &mapping_value_le);
 	memcpy(&mapping, mapping_value_le, sizeof(mapping));
@@ -1372,8 +1375,9 @@ static int __load_mapping_v2(struct dm_c
 			dm_array_cursor_get_value(hint_cursor, (void **) &hint_value_le);
 			memcpy(&hint, hint_value_le, sizeof(hint));
 		}
+		if (cmd->clean_when_opened)
+			dirty = dm_bitset_cursor_get_value(dirty_cursor);
 
-		dirty = dm_bitset_cursor_get_value(dirty_cursor);
 		r = fn(context, oblock, to_cblock(cb), dirty,
 		       le32_to_cpu(hint), hints_valid);
 		if (r) {

[PATCH 4.14 33/89] dm crypt: dont decrease device limits

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit bc9e9cf0401f18e33b78d4c8a518661b8346baf7 upstream.

dm-crypt should only increase device limits, it should not decrease them.

This fixes a bug where the user could creates a crypt device with 1024
sector size on the top of scsi device that had 4096 logical block size.
The limit 4096 would be lost and the user could incorrectly send
1024-I/Os to the crypt device.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-crypt.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -3072,11 +3072,11 @@ static void crypt_io_hints(struct dm_tar
 	 */
 	limits->max_segment_size = PAGE_SIZE;
 
-	if (cc->sector_size != (1 << SECTOR_SHIFT)) {
-		limits->logical_block_size = cc->sector_size;
-		limits->physical_block_size = cc->sector_size;
-		blk_limits_io_min(limits, cc->sector_size);
-	}
+	limits->logical_block_size =
+		max_t(unsigned short, limits->logical_block_size, cc->sector_size);
+	limits->physical_block_size =
+		max_t(unsigned, limits->physical_block_size, cc->sector_size);
+	limits->io_min = max_t(unsigned, limits->io_min, cc->sector_size);
 }
 
 static struct target_type crypt_target = {

[PATCH 4.14 35/89] Drivers: hv: vmbus: Reset the channel callback in vmbus_onoffer_rescind()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dexuan Cui <decui@microsoft.com>

commit d3b26dd7cb0e3433bfd3c1d4dcf74c6039bb49fb upstream.

Before setting channel->rescind in vmbus_rescind_cleanup(), we should make
sure the channel callback won't run any more, otherwise a high-level
driver like pci_hyperv, which may be infinitely waiting for the host VSP's
response and notices the channel has been rescinded, can't safely give
up: e.g., in hv_pci_protocol_negotiation() -> wait_for_response(), it's
unsafe to exit from wait_for_response() and proceed with the on-stack
variable "comp_pkt" popped. The issue was originally spotted by
Michael Kelley <mikelley@microsoft.com>.

In vmbus_close_internal(), the patch also minimizes the range protected by
disabling/enabling channel->callback_event: we don't really need that for
the whole function.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/hv/channel.c      |   40 ++++++++++++++++++++++++----------------
 drivers/hv/channel_mgmt.c |    6 ++++++
 include/linux/hyperv.h    |    2 ++
 3 files changed, 32 insertions(+), 16 deletions(-)

--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@@ -541,11 +541,8 @@ static void reset_channel_cb(void *arg)
 	channel->onchannel_callback = NULL;
 }
 
-static int vmbus_close_internal(struct vmbus_channel *channel)
+void vmbus_reset_channel_cb(struct vmbus_channel *channel)
 {
-	struct vmbus_channel_close_channel *msg;
-	int ret;
-
 	/*
 	 * vmbus_on_event(), running in the per-channel tasklet, can race
 	 * with vmbus_close_internal() in the case of SMP guest, e.g., when
@@ -555,6 +552,29 @@ static int vmbus_close_internal(struct v
 	 */
 	tasklet_disable(&channel->callback_event);
 
+	channel->sc_creation_callback = NULL;
+
+	/* Stop the callback asap */
+	if (channel->target_cpu != get_cpu()) {
+		put_cpu();
+		smp_call_function_single(channel->target_cpu, reset_channel_cb,
+					 channel, true);
+	} else {
+		reset_channel_cb(channel);
+		put_cpu();
+	}
+
+	/* Re-enable tasklet for use on re-open */
+	tasklet_enable(&channel->callback_event);
+}
+
+static int vmbus_close_internal(struct vmbus_channel *channel)
+{
+	struct vmbus_channel_close_channel *msg;
+	int ret;
+
+	vmbus_reset_channel_cb(channel);
+
 	/*
 	 * In case a device driver's probe() fails (e.g.,
 	 * util_probe() -> vmbus_open() returns -ENOMEM) and the device is
@@ -568,16 +588,6 @@ static int vmbus_close_internal(struct v
 	}
 
 	channel->state = CHANNEL_OPEN_STATE;
-	channel->sc_creation_callback = NULL;
-	/* Stop callback and cancel the timer asap */
-	if (channel->target_cpu != get_cpu()) {
-		put_cpu();
-		smp_call_function_single(channel->target_cpu, reset_channel_cb,
-					 channel, true);
-	} else {
-		reset_channel_cb(channel);
-		put_cpu();
-	}
 
 	/* Send a closing message */
 
@@ -620,8 +630,6 @@ static int vmbus_close_internal(struct v
 		get_order(channel->ringbuffer_pagecount * PAGE_SIZE));
 
 out:
-	/* re-enable tasklet for use on re-open */
-	tasklet_enable(&channel->callback_event);
 	return ret;
 }
 
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@@ -882,6 +882,12 @@ static void vmbus_onoffer_rescind(struct
 	}
 
 	/*
+	 * Before setting channel->rescind in vmbus_rescind_cleanup(), we
+	 * should make sure the channel callback is not running any more.
+	 */
+	vmbus_reset_channel_cb(channel);
+
+	/*
 	 * Now wait for offer handling to complete.
 	 */
 	vmbus_rescind_cleanup(channel);
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1026,6 +1026,8 @@ extern int vmbus_establish_gpadl(struct
 extern int vmbus_teardown_gpadl(struct vmbus_channel *channel,
 				     u32 gpadl_handle);
 
+void vmbus_reset_channel_cb(struct vmbus_channel *channel);
+
 extern int vmbus_recvpacket(struct vmbus_channel *channel,
 				  void *buffer,
 				  u32 bufferlen,

[PATCH 4.14 36/89] iio: sca3000: Fix missing return in switch

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gustavo A. R. Silva <gustavo@embeddedor.com>

commit c5b974bee9d2ceae4c441ae5a01e498c2674e100 upstream.

The IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY case is missing a
return and will fall through to the default case and errorenously
return -EINVAL.

Fix this by adding in missing *return ret*.

Fixes: 626f971b5b07 ("staging:iio:accel:sca3000 Add write support to the low pass filter control")
Reported-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/accel/sca3000.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/iio/accel/sca3000.c
+++ b/drivers/iio/accel/sca3000.c
@@ -797,6 +797,7 @@ static int sca3000_write_raw(struct iio_
 		mutex_lock(&st->lock);
 		ret = sca3000_write_3db_freq(st, val);
 		mutex_unlock(&st->lock);
+		return ret;
 	default:
 		return -EINVAL;
 	}

[PATCH 4.14 37/89] iio: ad9523: Fix displayed phase

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit 5a4e33c1c53ae7d4425f7d94e60e4458a37b349e upstream.

Fix the displayed phase for the ad9523 driver. Currently the most
significant decimal place is dropped and all other digits are shifted one
to the left. This is due to a multiplication by 10, which is not necessary,
so remove it.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: cd1678f9632 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/frequency/ad9523.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -642,7 +642,7 @@ static int ad9523_read_raw(struct iio_de
 		code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) /
 			AD9523_CLK_DIST_DIV_REV(ret);
 		*val = code / 1000000;
-		*val2 = (code % 1000000) * 10;
+		*val2 = code % 1000000;
 		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;

[PATCH 4.14 38/89] iio: ad9523: Fix return value for ad952x_store()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Lars-Peter Clausen <lars@metafoo.de>

commit 9a5094ca29ea9b1da301b31fd377c0c0c4c23034 upstream.

A sysfs write callback function needs to either return the number of
consumed characters or an error.

The ad952x_store() function currently returns 0 if the input value was "0",
this will signal that no characters have been consumed and the function
will be called repeatedly in a loop indefinitely. Fix this by returning
number of supplied characters to indicate that the whole input string has
been consumed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Fixes: cd1678f96329 ("iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iio/frequency/ad9523.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/frequency/ad9523.c
+++ b/drivers/iio/frequency/ad9523.c
@@ -508,7 +508,7 @@ static ssize_t ad9523_store(struct devic
 		return ret;
 
 	if (!state)
-		return 0;
+		return len;
 
 	mutex_lock(&indio_dev->mlock);
 	switch ((u32)this_attr->address) {

[PATCH 4.14 39/89] extcon: Release locking when sending the notification of connector state

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chanwoo Choi <cw00.choi@samsung.com>

commit 8a9dbb779fe882325b9a0238494a7afaff2eb444 upstream.

Previously, extcon used the spinlock before calling the notifier_call_chain
to prevent the scheduled out of task and to prevent the notification delay.
When spinlock is locked for sending the notification, deadlock issue
occured on the side of extcon consumer device. To fix this issue,
extcon consumer device should always use the work. it is always not
reasonable to use work.

To fix this issue on extcon consumer device, release locking when sending
the notification of connector state.

Fixes: ab11af049f88 ("extcon: Add the synchronization extcon APIs to support the notification")
Cc: stable@vger.kernel.org
Cc: Roger Quadros <rogerq@ti.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/extcon/extcon.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/extcon/extcon.c
+++ b/drivers/extcon/extcon.c
@@ -433,8 +433,8 @@ int extcon_sync(struct extcon_dev *edev,
 		return index;
 
 	spin_lock_irqsave(&edev->lock, flags);
-
 	state = !!(edev->state & BIT(index));
+	spin_unlock_irqrestore(&edev->lock, flags);
 
 	/*
 	 * Call functions in a raw notifier chain for the specific one
@@ -448,6 +448,7 @@ int extcon_sync(struct extcon_dev *edev,
 	 */
 	raw_notifier_call_chain(&edev->nh_all, state, edev);
 
+	spin_lock_irqsave(&edev->lock, flags);
 	/* This could be in interrupt handler */
 	prop_buf = (char *)get_zeroed_page(GFP_ATOMIC);
 	if (!prop_buf) {

[PATCH 4.14 40/89] vmw_balloon: fix inflation of 64-bit GFNs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@vmware.com>

commit 09755690c6b7c1eabdc4651eb3b276f8feb1e447 upstream.

When balloon batching is not supported by the hypervisor, the guest
frame number (GFN) must fit in 32-bit. However, due to a bug, this check
was mistakenly ignored. In practice, when total RAM is greater than
16TB, the balloon does not work currently, making this bug unlikely to
happen.

Fixes: ef0f8f112984 ("VMware balloon: partially inline vmballoon_reserve_page.")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/vmw_balloon.c |   13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -450,7 +450,7 @@ static int vmballoon_send_lock_page(stru
 
 	pfn32 = (u32)pfn;
 	if (pfn32 != pfn)
-		return -1;
+		return -EINVAL;
 
 	STATS_INC(b->stats.lock[false]);
 
@@ -460,7 +460,7 @@ static int vmballoon_send_lock_page(stru
 
 	pr_debug("%s - ppn %lx, hv returns %ld\n", __func__, pfn, status);
 	STATS_INC(b->stats.lock_fail[false]);
-	return 1;
+	return -EIO;
 }
 
 static int vmballoon_send_batched_lock(struct vmballoon *b,
@@ -597,11 +597,12 @@ static int vmballoon_lock_page(struct vm
 
 	locked = vmballoon_send_lock_page(b, page_to_pfn(page), &hv_status,
 								target);
-	if (locked > 0) {
+	if (locked) {
 		STATS_INC(b->stats.refused_alloc[false]);
 
-		if (hv_status == VMW_BALLOON_ERROR_RESET ||
-				hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED) {
+		if (locked == -EIO &&
+		    (hv_status == VMW_BALLOON_ERROR_RESET ||
+		     hv_status == VMW_BALLOON_ERROR_PPN_NOTNEEDED)) {
 			vmballoon_free_page(page, false);
 			return -EIO;
 		}
@@ -617,7 +618,7 @@ static int vmballoon_lock_page(struct vm
 		} else {
 			vmballoon_free_page(page, false);
 		}
-		return -EIO;
+		return locked;
 	}
 
 	/* track allocated page */

[PATCH 4.14 41/89] vmw_balloon: do not use 2MB without batching

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@vmware.com>

commit 5081efd112560d3febb328e627176235b250d59d upstream.

If the hypervisor sets 2MB batching is on, while batching is cleared,
the balloon code breaks. In this case the legacy mechanism is used with
2MB page. The VM would report a 2MB page is ballooned, and the
hypervisor would only take the first 4KB.

While the hypervisor should not report such settings, make the code more
robust by not enabling 2MB support without batching.

Fixes: 365bd7ef7ec8e ("VMware balloon: Support 2m page ballooning.")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/vmw_balloon.c |    8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -341,7 +341,13 @@ static bool vmballoon_send_start(struct
 		success = false;
 	}
 
-	if (b->capabilities & VMW_BALLOON_BATCHED_2M_CMDS)
+	/*
+	 * 2MB pages are only supported with batching. If batching is for some
+	 * reason disabled, do not use 2MB pages, since otherwise the legacy
+	 * mechanism is used with 2MB pages, causing a failure.
+	 */
+	if ((b->capabilities & VMW_BALLOON_BATCHED_2M_CMDS) &&
+	    (b->capabilities & VMW_BALLOON_BATCHED_CMDS))
 		b->supported_page_sizes = 2;
 	else
 		b->supported_page_sizes = 1;

[PATCH 4.14 42/89] vmw_balloon: VMCI_DOORBELL_SET does not check status

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@vmware.com>

commit ce664331b2487a5d244a51cbdd8cb54f866fbe5d upstream.

When vmballoon_vmci_init() sets a doorbell using VMCI_DOORBELL_SET, for
some reason it does not consider the status and looks at the result.
However, the hypervisor does not update the result - it updates the
status. This might cause VMCI doorbell not to be enabled, resulting in
degraded performance.

Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/vmw_balloon.c |   37 +++++++++++++++++++------------------
 1 file changed, 19 insertions(+), 18 deletions(-)

--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -1036,29 +1036,30 @@ static void vmballoon_vmci_cleanup(struc
  */
 static int vmballoon_vmci_init(struct vmballoon *b)
 {
-	int error = 0;
+	unsigned long error, dummy;
 
-	if ((b->capabilities & VMW_BALLOON_SIGNALLED_WAKEUP_CMD) != 0) {
-		error = vmci_doorbell_create(&b->vmci_doorbell,
-				VMCI_FLAG_DELAYED_CB,
-				VMCI_PRIVILEGE_FLAG_RESTRICTED,
-				vmballoon_doorbell, b);
-
-		if (error == VMCI_SUCCESS) {
-			VMWARE_BALLOON_CMD(VMCI_DOORBELL_SET,
-					b->vmci_doorbell.context,
-					b->vmci_doorbell.resource, error);
-			STATS_INC(b->stats.doorbell_set);
-		}
-	}
+	if ((b->capabilities & VMW_BALLOON_SIGNALLED_WAKEUP_CMD) == 0)
+		return 0;
 
-	if (error != 0) {
-		vmballoon_vmci_cleanup(b);
+	error = vmci_doorbell_create(&b->vmci_doorbell, VMCI_FLAG_DELAYED_CB,
+				     VMCI_PRIVILEGE_FLAG_RESTRICTED,
+				     vmballoon_doorbell, b);
 
-		return -EIO;
-	}
+	if (error != VMCI_SUCCESS)
+		goto fail;
+
+	error = VMWARE_BALLOON_CMD(VMCI_DOORBELL_SET, b->vmci_doorbell.context,
+				   b->vmci_doorbell.resource, dummy);
+
+	STATS_INC(b->stats.doorbell_set);
+
+	if (error != VMW_BALLOON_SUCCESS)
+		goto fail;
 
 	return 0;
+fail:
+	vmballoon_vmci_cleanup(b);
+	return -EIO;
 }
 
 /*

[PATCH 4.14 43/89] vmw_balloon: fix VMCI use when balloon built into kernel

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@vmware.com>

commit c3cc1b0fc27508da53fe955a3b23d03964410682 upstream.

Currently, when all modules, including VMCI and VMware balloon are built
into the kernel, the initialization of the balloon happens before the
VMCI is probed. As a result, the balloon fails to initialize the VMCI
doorbell, which it uses to get asynchronous requests for balloon size
changes.

The problem can be seen in the logs, in the form of the following
message:
	"vmw_balloon: failed to initialize vmci doorbell"

The driver would work correctly but slightly less efficiently, probing
for requests periodically. This patch changes the balloon to be
initialized using late_initcall() instead of module_init() to address
this issue. It does not address a situation in which VMCI is built as a
module and the balloon is built into the kernel.

Fixes: 48e3d668b790 ("VMware balloon: Enable notification via VMCI")
Cc: stable@vger.kernel.org
Reviewed-by: Xavier Deguillard <xdeguillard@vmware.com>
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/misc/vmw_balloon.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/drivers/misc/vmw_balloon.c
+++ b/drivers/misc/vmw_balloon.c
@@ -1297,7 +1297,14 @@ static int __init vmballoon_init(void)
 
 	return 0;
 }
-module_init(vmballoon_init);
+
+/*
+ * Using late_initcall() instead of module_init() allows the balloon to use the
+ * VMCI doorbell even when the balloon is built into the kernel. Otherwise the
+ * VMCI is probed only after the balloon is initialized. If the balloon is used
+ * as a module, late_initcall() is equivalent to module_init().
+ */
+late_initcall(vmballoon_init);
 
 static void __exit vmballoon_exit(void)
 {

[PATCH 4.14 44/89] rtc: omap: fix potential crash on power off

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Johan Hovold <johan@kernel.org>

commit 5c8b84f410b3819d14cb1ebf32e4b3714b5a6e0b upstream.

Do not set the system power-off callback and omap power-off rtc pointer
until we're done setting up our device to avoid leaving stale pointers
around after a late probe error.

Fixes: 97ea1906b3c2 ("rtc: omap: Support ext_wakeup configuration")
Cc: stable <stable@vger.kernel.org>     # 4.9
Cc: Marcin Niestroj <m.niestroj@grinn-global.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/rtc/rtc-omap.c |   14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/rtc/rtc-omap.c
+++ b/drivers/rtc/rtc-omap.c
@@ -817,13 +817,6 @@ static int omap_rtc_probe(struct platfor
 			goto err;
 	}
 
-	if (rtc->is_pmic_controller) {
-		if (!pm_power_off) {
-			omap_rtc_power_off_rtc = rtc;
-			pm_power_off = omap_rtc_power_off;
-		}
-	}
-
 	/* Support ext_wakeup pinconf */
 	rtc_pinctrl_desc.name = dev_name(&pdev->dev);
 
@@ -833,6 +826,13 @@ static int omap_rtc_probe(struct platfor
 		return PTR_ERR(rtc->pctldev);
 	}
 
+	if (rtc->is_pmic_controller) {
+		if (!pm_power_off) {
+			omap_rtc_power_off_rtc = rtc;
+			pm_power_off = omap_rtc_power_off;
+		}
+	}
+
 	return 0;
 
 err:

[PATCH 4.14 45/89] tracing: Do not call start/stop() functions when tracing_on does not change

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit f143641bfef9a4a60c57af30de26c63057e7e695 upstream.

Currently, when one echo's in 1 into tracing_on, the current tracer's
"start()" function is executed, even if tracing_on was already one. This can
lead to strange side effects. One being that if the hwlat tracer is enabled,
and someone does "echo 1 > tracing_on" into tracing_on, the hwlat tracer's
start() function is called again which will recreate another kernel thread,
and make it unable to remove the old one.

Link: http://lkml.kernel.org/r/1533120354-22923-1-git-send-email-erica.bugden@linutronix.de

Cc: stable@vger.kernel.org
Fixes: 2df8f8a6a897e ("tracing: Fix regression with irqsoff tracer and tracing_on file")
Reported-by: Erica Bugden <erica.bugden@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -7545,7 +7545,9 @@ rb_simple_write(struct file *filp, const
 
 	if (buffer) {
 		mutex_lock(&trace_types_lock);
-		if (val) {
+		if (!!val == tracer_tracing_is_on(tr)) {
+			val = 0; /* do nothing */
+		} else if (val) {
 			tracer_tracing_on(tr);
 			if (tr->current_trace->start)
 				tr->current_trace->start(tr);

[PATCH 4.14 46/89] tracing/blktrace: Fix to allow setting same value

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 757d9140072054528b13bbe291583d9823cde195 upstream.

Masami Hiramatsu reported:

  Current trace-enable attribute in sysfs returns an error
  if user writes the same setting value as current one,
  e.g.

    # cat /sys/block/sda/trace/enable
    0
    # echo 0 > /sys/block/sda/trace/enable
    bash: echo: write error: Invalid argument
    # echo 1 > /sys/block/sda/trace/enable
    # echo 1 > /sys/block/sda/trace/enable
    bash: echo: write error: Device or resource busy

  But this is not a preferred behavior, it should ignore
  if new setting is same as current one. This fixes the
  problem as below.

    # cat /sys/block/sda/trace/enable
    0
    # echo 0 > /sys/block/sda/trace/enable
    # echo 1 > /sys/block/sda/trace/enable
    # echo 1 > /sys/block/sda/trace/enable

Link: http://lkml.kernel.org/r/20180816103802.08678002@gandalf.local.home

Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: cd649b8bb830d ("blktrace: remove sysfs_blk_trace_enable_show/store()")
Reported-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/blktrace.c |    4 ++++
 1 file changed, 4 insertions(+)

--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -1809,6 +1809,10 @@ static ssize_t sysfs_blk_trace_attr_stor
 	mutex_lock(&q->blk_trace_mutex);
 
 	if (attr == &dev_attr_enable) {
+		if (!!value == !!q->blk_trace) {
+			ret = 0;
+			goto out_unlock_bdev;
+		}
 		if (value)
 			ret = blk_trace_setup_queue(q, bdev);
 		else

[PATCH 4.14 47/89] printk/tracing: Do not trace printk_nmi_enter()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit d1c392c9e2a301f38998a353f467f76414e38725 upstream.

I hit the following splat in my tests:

------------[ cut here ]------------
IRQs not enabled as expected
WARNING: CPU: 3 PID: 0 at kernel/time/tick-sched.c:982 tick_nohz_idle_enter+0x44/0x8c
Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6table_filter ip6_tables ipv6
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.19.0-rc2-test+ #2
Hardware name: MSI MS-7823/CSM-H87M-G43 (MS-7823), BIOS V1.6 02/22/2014
EIP: tick_nohz_idle_enter+0x44/0x8c
Code: ec 05 00 00 00 75 26 83 b8 c0 05 00 00 00 75 1d 80 3d d0 36 3e c1 00
75 14 68 94 63 12 c1 c6 05 d0 36 3e c1 01 e8 04 ee f8 ff <0f> 0b 58 fa bb a0
e5 66 c1 e8 25 0f 04 00 64 03 1d 28 31 52 c1 8b
EAX: 0000001c EBX: f26e7f8c ECX: 00000006 EDX: 00000007
ESI: f26dd1c0 EDI: 00000000 EBP: f26e7f40 ESP: f26e7f38
DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010296
CR0: 80050033 CR2: 0813c6b0 CR3: 2f342000 CR4: 001406f0
Call Trace:
 do_idle+0x33/0x202
 cpu_startup_entry+0x61/0x63
 start_secondary+0x18e/0x1ed
 startup_32_smp+0x164/0x168
irq event stamp: 18773830
hardirqs last  enabled at (18773829): [<c040150c>] trace_hardirqs_on_thunk+0xc/0x10
hardirqs last disabled at (18773830): [<c040151c>] trace_hardirqs_off_thunk+0xc/0x10
softirqs last  enabled at (18773824): [<c0ddaa6f>] __do_softirq+0x25f/0x2bf
softirqs last disabled at (18773767): [<c0416bbe>] call_on_stack+0x45/0x4b
---[ end trace b7c64aa79e17954a ]---

After a bit of debugging, I found what was happening. This would trigger
when performing "perf" with a high NMI interrupt rate, while enabling and
disabling function tracer. Ftrace uses breakpoints to convert the nops at
the start of functions to calls to the function trampolines. The breakpoint
traps disable interrupts and this makes calls into lockdep via the
trace_hardirqs_off_thunk in the entry.S code. What happens is the following:

  do_idle {

    [interrupts enabled]

    <interrupt> [interrupts disabled]
	TRACE_IRQS_OFF [lockdep says irqs off]
	[...]
	TRACE_IRQS_IRET
	    test if pt_regs say return to interrupts enabled [yes]
	    TRACE_IRQS_ON [lockdep says irqs are on]

	    <nmi>
		nmi_enter() {
		    printk_nmi_enter() [traced by ftrace]
		    [ hit ftrace breakpoint ]
		    <breakpoint exception>
			TRACE_IRQS_OFF [lockdep says irqs off]
			[...]
			TRACE_IRQS_IRET [return from breakpoint]
			   test if pt_regs say interrupts enabled [no]
			   [iret back to interrupt]
	   [iret back to code]

    tick_nohz_idle_enter() {

	lockdep_assert_irqs_enabled() [lockdep say no!]

Although interrupts are indeed enabled, lockdep thinks it is not, and since
we now do asserts via lockdep, it gives a false warning. The issue here is
that printk_nmi_enter() is called before lockdep_off(), which disables
lockdep (for this reason) in NMIs. By simply not allowing ftrace to see
printk_nmi_enter() (via notrace annotation) we keep lockdep from getting
confused.

Cc: stable@vger.kernel.org
Fixes: 42a0bb3f71383 ("printk/nmi: generic solution for safe printk in NMI")
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/printk/printk_safe.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/printk/printk_safe.c
+++ b/kernel/printk/printk_safe.c
@@ -309,12 +309,12 @@ static __printf(1, 0) int vprintk_nmi(co
 	return printk_safe_log_store(s, fmt, args);
 }
 
-void printk_nmi_enter(void)
+void notrace printk_nmi_enter(void)
 {
 	this_cpu_or(printk_context, PRINTK_NMI_CONTEXT_MASK);
 }
 
-void printk_nmi_exit(void)
+void notrace printk_nmi_exit(void)
 {
 	this_cpu_and(printk_context, ~PRINTK_NMI_CONTEXT_MASK);
 }

[PATCH 4.14 48/89] livepatch: Validate module/old func name length

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>

commit 6e9df95b76cad18f7b217bdad7bb8a26d63b8c47 upstream.

livepatch module author can pass module name/old function name with more
than the defined character limit. With obj->name length greater than
MODULE_NAME_LEN, the livepatch module gets loaded but waits forever on
the module specified by obj->name to be loaded. It also populates a /sys
directory with an untruncated object name.

In the case of funcs->old_name length greater then KSYM_NAME_LEN, it
would not match against any of the symbol table entries. Instead loop
through the symbol table comparing them against a nonexisting function,
which can be avoided.

The same issues apply, to misspelled/incorrect names. At least gatekeep
the modules with over the limit string length, by checking for their
length during livepatch module registration.

Cc: stable@vger.kernel.org
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/livepatch/core.c |    6 ++++++
 1 file changed, 6 insertions(+)

--- a/kernel/livepatch/core.c
+++ b/kernel/livepatch/core.c
@@ -605,6 +605,9 @@ static int klp_init_func(struct klp_obje
 	if (!func->old_name || !func->new_func)
 		return -EINVAL;
 
+	if (strlen(func->old_name) >= KSYM_NAME_LEN)
+		return -EINVAL;
+
 	INIT_LIST_HEAD(&func->stack_node);
 	func->patched = false;
 	func->transition = false;
@@ -678,6 +681,9 @@ static int klp_init_object(struct klp_pa
 	if (!obj->funcs)
 		return -EINVAL;
 
+	if (klp_is_module(obj) && strlen(obj->name) >= MODULE_NAME_LEN)
+		return -EINVAL;
+
 	obj->patched = false;
 	obj->mod = NULL;
 

[PATCH 4.14 49/89] uprobes: Use synchronize_rcu() not synchronize_sched()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Steven Rostedt (VMware) <rostedt@goodmis.org>

commit 016f8ffc48cb01d1e7701649c728c5d2e737d295 upstream.

While debugging another bug, I was looking at all the synchronize*()
functions being used in kernel/trace, and noticed that trace_uprobes was
using synchronize_sched(), with a comment to synchronize with
{u,ret}_probe_trace_func(). When looking at those functions, the data is
protected with "rcu_read_lock()" and not with "rcu_read_lock_sched()". This
is using the wrong synchronize_*() function.

Link: http://lkml.kernel.org/r/20180809160553.469e1e32@gandalf.local.home

Cc: stable@vger.kernel.org
Fixes: 70ed91c6ec7f8 ("tracing/uprobes: Support ftrace_event_file base multibuffer")
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/trace/trace_uprobe.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -967,7 +967,7 @@ probe_event_disable(struct trace_uprobe
 
 		list_del_rcu(&link->list);
 		/* synchronize with u{,ret}probe_trace_func */
-		synchronize_sched();
+		synchronize_rcu();
 		kfree(link);
 
 		if (!list_empty(&tu->tp.files))

[PATCH 4.14 50/89] mfd: hi655x: Fix regmap area declared size for hi655x

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Rafael David Tinoco <rafael.tinoco@linaro.org>

commit 6afebb70ee7a4bde106dc1a875e7ac7997248f84 upstream.

Fixes https://bugs.linaro.org/show_bug.cgi?id=3903

LTP Functional tests have caused a bad paging request when triggering
the regmap_read_debugfs() logic of the device PMIC Hi6553 (reading
regmap/f8000000.pmic/registers file during read_all test):

Unable to handle kernel paging request at virtual address ffff0
[ffff00000984e000] pgd=0000000077ffe803, pud=0000000077ffd803,0
Internal error: Oops: 96000007 [#1] SMP
...
Hardware name: HiKey Development Board (DT)
...
Call trace:
 regmap_mmio_read8+0x24/0x40
 regmap_mmio_read+0x48/0x70
 _regmap_bus_reg_read+0x38/0x48
 _regmap_read+0x68/0x170
 regmap_read+0x50/0x78
 regmap_read_debugfs+0x1a0/0x308
 regmap_map_read_file+0x48/0x58
 full_proxy_read+0x68/0x98
 __vfs_read+0x48/0x80
 vfs_read+0x94/0x150
 SyS_read+0x6c/0xd8
 el0_svc_naked+0x30/0x34
Code: aa1e03e0 d503201f f9400280 8b334000 (39400000)

Investigations have showed that, when triggered by debugfs read()
handler, the mmio regmap logic was reading a bigger (16k) register area
than the one mapped by devm_ioremap_resource() during hi655x-pmic probe
time (4k).

This commit changes hi655x's max register, according to HW specs, to be
the same as the one declared in the pmic device in hi6220's dts, fixing
the issue.

Cc: <stable@vger.kernel.org> #v4.9 #v4.14 #v4.16 #v4.17
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/hi655x-pmic.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mfd/hi655x-pmic.c
+++ b/drivers/mfd/hi655x-pmic.c
@@ -49,7 +49,7 @@ static struct regmap_config hi655x_regma
 	.reg_bits = 32,
 	.reg_stride = HI655X_STRIDE,
 	.val_bits = 8,
-	.max_register = HI655X_BUS_ADDR(0xFFF),
+	.max_register = HI655X_BUS_ADDR(0x400) - HI655X_STRIDE,
 };
 
 static struct resource pwrkey_resources[] = {

[PATCH 4.14 51/89] ovl: fix wrong use of impure dir cache in ovl_iterate()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Amir Goldstein <amir73il@gmail.com>

commit 67810693077afc1ebf9e1646af300436cb8103c2 upstream.

Only upper dir can be impure, but if we are in the middle of
iterating a lower real dir, dir could be copied up and marked
impure. We only want the impure cache if we started iterating
a real upper dir to begin with.

Aditya Kali reported that the following reproducer hits the
WARN_ON(!cache->refcount) in ovl_get_cache():

 docker run --rm drupal:8.5.4-fpm-alpine \
    sh -c 'cd /var/www/html/vendor/symfony && \
           chown -R www-data:www-data . && ls -l .'

Reported-by: Aditya Kali <adityakali@google.com>
Tested-by: Aditya Kali <adityakali@google.com>
Fixes: 4edb83bb1041 ('ovl: constant d_ino for non-merge dirs')
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/overlayfs/readdir.c |   19 +++++++++++++++++--
 1 file changed, 17 insertions(+), 2 deletions(-)

--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -623,6 +623,21 @@ static int ovl_fill_real(struct dir_cont
 	return orig_ctx->actor(orig_ctx, name, namelen, offset, ino, d_type);
 }
 
+static bool ovl_is_impure_dir(struct file *file)
+{
+	struct ovl_dir_file *od = file->private_data;
+	struct inode *dir = d_inode(file->f_path.dentry);
+
+	/*
+	 * Only upper dir can be impure, but if we are in the middle of
+	 * iterating a lower real dir, dir could be copied up and marked
+	 * impure. We only want the impure cache if we started iterating
+	 * a real upper dir to begin with.
+	 */
+	return od->is_upper && ovl_test_flag(OVL_IMPURE, dir);
+
+}
+
 static int ovl_iterate_real(struct file *file, struct dir_context *ctx)
 {
 	int err;
@@ -646,7 +661,7 @@ static int ovl_iterate_real(struct file
 		rdt.parent_ino = stat.ino;
 	}
 
-	if (ovl_test_flag(OVL_IMPURE, d_inode(dir))) {
+	if (ovl_is_impure_dir(file)) {
 		rdt.cache = ovl_cache_get_impure(&file->f_path);
 		if (IS_ERR(rdt.cache))
 			return PTR_ERR(rdt.cache);
@@ -676,7 +691,7 @@ static int ovl_iterate(struct file *file
 		 * entries.
 		 */
 		if (ovl_same_sb(dentry->d_sb) &&
-		    (ovl_test_flag(OVL_IMPURE, d_inode(dentry)) ||
+		    (ovl_is_impure_dir(file) ||
 		     OVL_TYPE_MERGE(ovl_path_type(dentry->d_parent)))) {
 			return ovl_iterate_real(file, ctx);
 		}

[PATCH 4.14 52/89] drivers/block/zram/zram_drv.c: fix bug storing backing_dev

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Kalauskas <peskal@google.com>

commit c8bd134a4bddafe5917d163eea73873932c15e83 upstream.

The call to strlcpy in backing_dev_store is incorrect. It should take
the size of the destination buffer instead of the size of the source
buffer.  Additionally, ignore the newline character (\n) when reading
the new file_name buffer. This makes it possible to set the backing_dev
as follows:

	echo /dev/sdX > /sys/block/zram0/backing_dev

The reason it worked before was the fact that strlcpy() copies 'len - 1'
bytes, which is strlen(buf) - 1 in our case, so it accidentally didn't
copy the trailing new line symbol.  Which also means that "echo -n
/dev/sdX" most likely was broken.

Signed-off-by: Peter Kalauskas <peskal@google.com>
Link: http://lkml.kernel.org/r/20180813061623.GC64836@rodete-desktop-imager.corp.google.com
Acked-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: <stable@vger.kernel.org>    [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/block/zram/zram_drv.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -321,6 +321,7 @@ static ssize_t backing_dev_store(struct
 		struct device_attribute *attr, const char *buf, size_t len)
 {
 	char *file_name;
+	size_t sz;
 	struct file *backing_dev = NULL;
 	struct inode *inode;
 	struct address_space *mapping;
@@ -341,7 +342,11 @@ static ssize_t backing_dev_store(struct
 		goto out;
 	}
 
-	strlcpy(file_name, buf, len);
+	strlcpy(file_name, buf, PATH_MAX);
+	/* ignore trailing newline */
+	sz = strlen(file_name);
+	if (sz > 0 && file_name[sz - 1] == '\n')
+		file_name[sz - 1] = 0x00;
 
 	backing_dev = filp_open(file_name, O_RDWR|O_LARGEFILE, 0);
 	if (IS_ERR(backing_dev)) {

[PATCH 4.14 53/89] cpufreq: governor: Avoid accessing invalid governor_data

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Henry Willard <henry.willard@oracle.com>

commit 2a3eb51e30b9ac66fe1b75877627a7e4aaeca24a upstream.

If cppc_cpufreq.ko is deleted at the same time that tuned-adm is
changing profiles, there is a small chance that a race can occur
between cpufreq_dbs_governor_exit() and cpufreq_dbs_governor_limits()
resulting in a system failure when the latter tries to use
policy->governor_data that has been freed by the former.

This patch uses gov_dbs_data_mutex to synchronize access.

Fixes: e788892ba3cc (cpufreq: governor: Get rid of governor events)
Signed-off-by: Henry Willard <henry.willard@oracle.com>
[ rjw: Subject, minor white space adjustment ]
Cc: 4.8+ <stable@vger.kernel.org> # 4.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/cpufreq/cpufreq_governor.c |   12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -555,12 +555,20 @@ EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_s
 
 void cpufreq_dbs_governor_limits(struct cpufreq_policy *policy)
 {
-	struct policy_dbs_info *policy_dbs = policy->governor_data;
+	struct policy_dbs_info *policy_dbs;
+
+	/* Protect gov->gdbs_data against cpufreq_dbs_governor_exit() */
+	mutex_lock(&gov_dbs_data_mutex);
+	policy_dbs = policy->governor_data;
+	if (!policy_dbs)
+		goto out;
 
 	mutex_lock(&policy_dbs->update_mutex);
 	cpufreq_policy_apply_limits(policy);
 	gov_update_sample_delay(policy_dbs, 0);
-
 	mutex_unlock(&policy_dbs->update_mutex);
+
+out:
+	mutex_unlock(&gov_dbs_data_mutex);
 }
 EXPORT_SYMBOL_GPL(cpufreq_dbs_governor_limits);

[PATCH 4.14 54/89] PM / sleep: wakeup: Fix build error caused by missing SRCU support

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: zhangyi (F) <yi.zhang@huawei.com>

commit 3df6f61fff49632492490fb6e42646b803a9958a upstream.

Commit ea0212f40c6 (power: auto select CONFIG_SRCU) made the code in
drivers/base/power/wakeup.c use SRCU instead of RCU, but it forgot to
select CONFIG_SRCU in Kconfig, which leads to the following build
error if CONFIG_SRCU is not selected somewhere else:

drivers/built-in.o: In function `wakeup_source_remove':
(.text+0x3c6fc): undefined reference to `synchronize_srcu'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c7a8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `pm_print_active_wakeup_sources':
(.text+0x3c84c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d1d8): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_arm_wake_irqs':
(.text+0x3d228): undefined reference to `__srcu_read_unlock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d24c): undefined reference to `__srcu_read_lock'
drivers/built-in.o: In function `device_wakeup_disarm_wake_irqs':
(.text+0x3d29c): undefined reference to `__srcu_read_unlock'
drivers/built-in.o:(.data+0x4158): undefined reference to `process_srcu'

Fix this error by selecting CONFIG_SRCU when PM_SLEEP is enabled.

Fixes: ea0212f40c6 (power: auto select CONFIG_SRCU)
Cc: 4.2+ <stable@vger.kernel.org> # 4.2+
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
[ rjw: Minor subject/changelog fixups ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/power/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -105,6 +105,7 @@ config PM_SLEEP
 	def_bool y
 	depends on SUSPEND || HIBERNATE_CALLBACKS
 	select PM
+	select SRCU
 
 config PM_SLEEP_SMP
 	def_bool y

[PATCH 4.14 55/89] KVM: VMX: fixes for vmentry_l1d_flush module parameter

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini <pbonzini@redhat.com>

commit 0027ff2a75f9dcf0537ac0a65c5840b0e21a4950 upstream.

Two bug fixes:

1) missing entries in the l1d_param array; this can cause a host crash
if an access attempts to reach the missing entry. Future-proof the get
function against any overflows as well.  However, the two entries
VMENTER_L1D_FLUSH_EPT_DISABLED and VMENTER_L1D_FLUSH_NOT_REQUIRED must
not be accepted by the parse function, so disable them there.

2) invalid values must be rejected even if the CPU does not have the
bug, so test for them before checking boot_cpu_has(X86_BUG_L1TF)

... and a small refactoring, since the .cmd field is redundant with
the index in the array.

Reported-by: Bandan Das <bsd@redhat.com>
Cc: stable@vger.kernel.org
Fixes: a7b9020b06ec6d7c3f3b0d4ef1a9eba12654f4f7
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/vmx.c |   26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -200,12 +200,14 @@ static enum vmx_l1d_flush_state __read_m
 
 static const struct {
 	const char *option;
-	enum vmx_l1d_flush_state cmd;
+	bool for_parse;
 } vmentry_l1d_param[] = {
-	{"auto",	VMENTER_L1D_FLUSH_AUTO},
-	{"never",	VMENTER_L1D_FLUSH_NEVER},
-	{"cond",	VMENTER_L1D_FLUSH_COND},
-	{"always",	VMENTER_L1D_FLUSH_ALWAYS},
+	[VMENTER_L1D_FLUSH_AUTO]	 = {"auto", true},
+	[VMENTER_L1D_FLUSH_NEVER]	 = {"never", true},
+	[VMENTER_L1D_FLUSH_COND]	 = {"cond", true},
+	[VMENTER_L1D_FLUSH_ALWAYS]	 = {"always", true},
+	[VMENTER_L1D_FLUSH_EPT_DISABLED] = {"EPT disabled", false},
+	[VMENTER_L1D_FLUSH_NOT_REQUIRED] = {"not required", false},
 };
 
 #define L1D_CACHE_ORDER 4
@@ -289,8 +291,9 @@ static int vmentry_l1d_flush_parse(const
 
 	if (s) {
 		for (i = 0; i < ARRAY_SIZE(vmentry_l1d_param); i++) {
-			if (sysfs_streq(s, vmentry_l1d_param[i].option))
-				return vmentry_l1d_param[i].cmd;
+			if (vmentry_l1d_param[i].for_parse &&
+			    sysfs_streq(s, vmentry_l1d_param[i].option))
+				return i;
 		}
 	}
 	return -EINVAL;
@@ -300,13 +303,13 @@ static int vmentry_l1d_flush_set(const c
 {
 	int l1tf, ret;
 
-	if (!boot_cpu_has(X86_BUG_L1TF))
-		return 0;
-
 	l1tf = vmentry_l1d_flush_parse(s);
 	if (l1tf < 0)
 		return l1tf;
 
+	if (!boot_cpu_has(X86_BUG_L1TF))
+		return 0;
+
 	/*
 	 * Has vmx_init() run already? If not then this is the pre init
 	 * parameter parsing. In that case just store the value and let
@@ -326,6 +329,9 @@ static int vmentry_l1d_flush_set(const c
 
 static int vmentry_l1d_flush_get(char *s, const struct kernel_param *kp)
 {
+	if (WARN_ON_ONCE(l1tf_vmx_mitigation >= ARRAY_SIZE(vmentry_l1d_param)))
+		return sprintf(s, "???\n");
+
 	return sprintf(s, "%s\n", vmentry_l1d_param[l1tf_vmx_mitigation].option);
 }
 

[PATCH 4.14 56/89] KVM: PPC: Book3S: Fix guest DMA when guest partially backed by THP pages

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Paul Mackerras <paulus@ozlabs.org>

commit 8cfbdbdc24815417a3ab35101ccf706b9a23ff17 upstream.

Commit 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in
the pinned physical page", 2018-07-17) added some checks to ensure
that guest DMA mappings don't attempt to map more than the guest is
entitled to access. However, errors in the logic mean that legitimate
guest requests to map pages for DMA are being denied in some
situations. Specifically, if the first page of the range passed to
mm_iommu_get() is mapped with a normal page, and subsequent pages are
mapped with transparent huge pages, we end up with mem->pageshift ==
0. That means that the page size checks in mm_iommu_ua_to_hpa() and
mm_iommu_up_to_hpa_rm() will always fail for every page in that
region, and thus the guest can never map any memory in that region for
DMA, typically leading to a flood of error messages like this:

  qemu-system-ppc64: VFIO_MAP_DMA: -22
  qemu-system-ppc64: vfio_dma_map(0x10005f47780, 0x800000000000000, 0x10000, 0x7fff63ff0000) = -22 (Invalid argument)

The logic errors in mm_iommu_get() are:

  (a) use of 'ua' not 'ua + (i << PAGE_SHIFT)' in the find_linux_pte()
      call (meaning that find_linux_pte() returns the pte for the
      first address in the range, not the address we are currently up
      to);
  (b) use of 'pageshift' as the variable to receive the hugepage shift
      returned by find_linux_pte() - for a normal page this gets set
      to 0, leading to us setting mem->pageshift to 0 when we conclude
      that the pte returned by find_linux_pte() didn't match the page
      we were looking at;
  (c) comparing 'compshift', which is a page order, i.e. log base 2 of
      the number of pages, with 'pageshift', which is a log base 2 of
      the number of bytes.

To fix these problems, this patch introduces 'cur_ua' to hold the
current user address and uses that in the find_linux_pte() call;
introduces 'pteshift' to hold the hugepage shift found by
find_linux_pte(); and compares 'pteshift' with 'compshift +
PAGE_SHIFT' rather than 'compshift'.

The patch also moves the local_irq_restore to the point after the PTE
pointer returned by find_linux_pte() has been dereferenced because
otherwise the PTE could change underneath us, and adds a check to
avoid doing the find_linux_pte() call once mem->pageshift has been
reduced to PAGE_SHIFT, as an optimization.

Fixes: 76fa4975f3ed ("KVM: PPC: Check if IOMMU page is contained in the pinned physical page")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/mm/mmu_context_iommu.c |   17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

--- a/arch/powerpc/mm/mmu_context_iommu.c
+++ b/arch/powerpc/mm/mmu_context_iommu.c
@@ -130,6 +130,7 @@ long mm_iommu_get(struct mm_struct *mm,
 	long i, j, ret = 0, locked_entries = 0;
 	unsigned int pageshift;
 	unsigned long flags;
+	unsigned long cur_ua;
 	struct page *page = NULL;
 
 	mutex_lock(&mem_list_mutex);
@@ -178,7 +179,8 @@ long mm_iommu_get(struct mm_struct *mm,
 	}
 
 	for (i = 0; i < entries; ++i) {
-		if (1 != get_user_pages_fast(ua + (i << PAGE_SHIFT),
+		cur_ua = ua + (i << PAGE_SHIFT);
+		if (1 != get_user_pages_fast(cur_ua,
 					1/* pages */, 1/* iswrite */, &page)) {
 			ret = -EFAULT;
 			for (j = 0; j < i; ++j)
@@ -197,7 +199,7 @@ long mm_iommu_get(struct mm_struct *mm,
 		if (is_migrate_cma_page(page)) {
 			if (mm_iommu_move_page_from_cma(page))
 				goto populate;
-			if (1 != get_user_pages_fast(ua + (i << PAGE_SHIFT),
+			if (1 != get_user_pages_fast(cur_ua,
 						1/* pages */, 1/* iswrite */,
 						&page)) {
 				ret = -EFAULT;
@@ -211,20 +213,21 @@ long mm_iommu_get(struct mm_struct *mm,
 		}
 populate:
 		pageshift = PAGE_SHIFT;
-		if (PageCompound(page)) {
+		if (mem->pageshift > PAGE_SHIFT && PageCompound(page)) {
 			pte_t *pte;
 			struct page *head = compound_head(page);
 			unsigned int compshift = compound_order(head);
+			unsigned int pteshift;
 
 			local_irq_save(flags); /* disables as well */
-			pte = find_linux_pte(mm->pgd, ua, NULL, &pageshift);
-			local_irq_restore(flags);
+			pte = find_linux_pte(mm->pgd, cur_ua, NULL, &pteshift);
 
 			/* Double check it is still the same pinned page */
 			if (pte && pte_page(*pte) == head &&
-					pageshift == compshift)
-				pageshift = max_t(unsigned int, pageshift,
+			    pteshift == compshift + PAGE_SHIFT)
+				pageshift = max_t(unsigned int, pteshift,
 						PAGE_SHIFT);
+			local_irq_restore(flags);
 		}
 		mem->pageshift = min(mem->pageshift, pageshift);
 		mem->hpas[i] = page_to_pfn(page) << PAGE_SHIFT;

[PATCH 4.14 57/89] xtensa: limit offsets in __loop_cache_{all,page}

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit be75de25251f7cf3e399ca1f584716a95510d24a upstream.

When building kernel for xtensa cores with big cache lines (e.g. 128
bytes or more) __loop_cache_all and __loop_cache_page may generate
assembly instructions with immediate fields that are too big. This
results in the following build errors:

  arch/xtensa/mm/misc.S: Assembler messages:
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '256'
  arch/xtensa/mm/misc.S:464: Error: operand 2 of 'diwbi' has invalid value '384'
  arch/xtensa/kernel/head.S: Assembler messages:
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '256'
  arch/xtensa/kernel/head.S:172: Error: operand 2 of 'diu' has invalid value '384'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '256'
  arch/xtensa/kernel/head.S:176: Error: operand 2 of 'iiu' has invalid value '384'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '256'
  arch/xtensa/kernel/head.S:255: Error: operand 2 of 'diwb' has invalid value '384'

Add parameter max_immed to these macros and use it to limit values of
immediate operands. Extract common code of these macros into the new
macro __loop_cache_unroll.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/include/asm/cacheasm.h |   65 ++++++++++++++++++++++---------------
 1 file changed, 40 insertions(+), 25 deletions(-)

--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -31,16 +31,32 @@
  *
  */
 
-	.macro	__loop_cache_all ar at insn size line_width
 
-	movi	\ar, 0
+	.macro	__loop_cache_unroll ar at insn size line_width max_immed
+
+	.if	(1 << (\line_width)) > (\max_immed)
+	.set	_reps, 1
+	.elseif	(2 << (\line_width)) > (\max_immed)
+	.set	_reps, 2
+	.else
+	.set	_reps, 4
+	.endif
+
+	__loopi	\ar, \at, \size, (_reps << (\line_width))
+	.set	_index, 0
+	.rep	_reps
+	\insn	\ar, _index << (\line_width)
+	.set	_index, _index + 1
+	.endr
+	__endla	\ar, \at, _reps << (\line_width)
+
+	.endm
+
 
-	__loopi	\ar, \at, \size, (4 << (\line_width))
-	\insn	\ar, 0 << (\line_width)
-	\insn	\ar, 1 << (\line_width)
-	\insn	\ar, 2 << (\line_width)
-	\insn	\ar, 3 << (\line_width)
-	__endla	\ar, \at, 4 << (\line_width)
+	.macro	__loop_cache_all ar at insn size line_width max_immed
+
+	movi	\ar, 0
+	__loop_cache_unroll \ar, \at, \insn, \size, \line_width, \max_immed
 
 	.endm
 
@@ -57,14 +73,9 @@
 	.endm
 
 
-	.macro	__loop_cache_page ar at insn line_width
+	.macro	__loop_cache_page ar at insn line_width max_immed
 
-	__loopi	\ar, \at, PAGE_SIZE, 4 << (\line_width)
-	\insn	\ar, 0 << (\line_width)
-	\insn	\ar, 1 << (\line_width)
-	\insn	\ar, 2 << (\line_width)
-	\insn	\ar, 3 << (\line_width)
-	__endla	\ar, \at, 4 << (\line_width)
+	__loop_cache_unroll \ar, \at, \insn, PAGE_SIZE, \line_width, \max_immed
 
 	.endm
 
@@ -72,7 +83,8 @@
 	.macro	___unlock_dcache_all ar at
 
 #if XCHAL_DCACHE_LINE_LOCKABLE && XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diu XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -81,7 +93,8 @@
 	.macro	___unlock_icache_all ar at
 
 #if XCHAL_ICACHE_LINE_LOCKABLE && XCHAL_ICACHE_SIZE
-	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_all \ar \at iiu XCHAL_ICACHE_SIZE \
+		XCHAL_ICACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -90,7 +103,8 @@
 	.macro	___flush_invalidate_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diwbi XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -99,7 +113,8 @@
 	.macro	___flush_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_all \ar \at diwb XCHAL_DCACHE_SIZE \
+		XCHAL_DCACHE_LINEWIDTH 240
 #endif
 
 	.endm
@@ -109,7 +124,7 @@
 
 #if XCHAL_DCACHE_SIZE
 	__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
-			 XCHAL_DCACHE_LINEWIDTH
+			 XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -119,7 +134,7 @@
 
 #if XCHAL_ICACHE_SIZE
 	__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
-			 XCHAL_ICACHE_LINEWIDTH
+			 XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -166,7 +181,7 @@
 	.macro	___flush_invalidate_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhwbi XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -175,7 +190,7 @@
 	.macro ___flush_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhwb XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -184,7 +199,7 @@
 	.macro	___invalidate_dcache_page ar as
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH
+	__loop_cache_page \ar \as dhi XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
 	.endm
@@ -193,7 +208,7 @@
 	.macro	___invalidate_icache_page ar as
 
 #if XCHAL_ICACHE_SIZE
-	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH
+	__loop_cache_page \ar \as ihi XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 
 	.endm

[PATCH 4.14 58/89] xtensa: increase ranges in ___invalidate_{i,d}cache_all

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Max Filippov <jcmvbkbc@gmail.com>

commit fec3259c9f747c039f90e99570540114c8d81a14 upstream.

Cache invalidation macros use cache line size to iterate over
invalidated cache lines, assuming that all cache ways are invalidated by
single instruction, but xtensa ISA recommends to not assume that for
future compatibility:
  In some implementations all ways at index Addry-1..z are invalidated
  regardless of the specified way, but for future compatibility this
  behavior should not be assumed.

Iterate over all cache ways in ___invalidate_icache_all and
___invalidate_dcache_all.

Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/xtensa/include/asm/cacheasm.h |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/xtensa/include/asm/cacheasm.h
+++ b/arch/xtensa/include/asm/cacheasm.h
@@ -123,7 +123,7 @@
 	.macro	___invalidate_dcache_all ar at
 
 #if XCHAL_DCACHE_SIZE
-	__loop_cache_all \ar \at dii __stringify(DCACHE_WAY_SIZE) \
+	__loop_cache_all \ar \at dii XCHAL_DCACHE_SIZE \
 			 XCHAL_DCACHE_LINEWIDTH 1020
 #endif
 
@@ -133,7 +133,7 @@
 	.macro	___invalidate_icache_all ar at
 
 #if XCHAL_ICACHE_SIZE
-	__loop_cache_all \ar \at iii __stringify(ICACHE_WAY_SIZE) \
+	__loop_cache_all \ar \at iii XCHAL_ICACHE_SIZE \
 			 XCHAL_ICACHE_LINEWIDTH 1020
 #endif
 

[PATCH 4.14 59/89] block, bfq: return nbytes and not zero from struct cftype .write() method

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Maciej S. Szmigiero <mail@maciej.szmigiero.name>

commit fc8ebd01deeb12728c83381f6ec923e4a192ffd3 upstream.

The value that struct cftype .write() method returns is then directly
returned to userspace as the value returned by write() syscall, so it
should be the number of bytes actually written (or consumed) and not zero.

Returning zero from write() syscall makes programs like /bin/echo or bash
spin.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support")
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 block/bfq-cgroup.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/block/bfq-cgroup.c
+++ b/block/bfq-cgroup.c
@@ -887,7 +887,8 @@ static ssize_t bfq_io_set_weight(struct
 	if (ret)
 		return ret;
 
-	return bfq_io_set_weight_legacy(of_css(of), NULL, weight);
+	ret = bfq_io_set_weight_legacy(of_css(of), NULL, weight);
+	return ret ?: nbytes;
 }
 
 static int bfqg_print_stat(struct seq_file *sf, void *v)

[PATCH 4.14 60/89] pnfs/blocklayout: off by one in bl_map_stripe()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 0914bb965e38a055e9245637aed117efbe976e91 upstream.

"dev->nr_children" is the number of children which were parsed
successfully in bl_parse_stripe().  It could be all of them and then, in
that case, it is equal to v->stripe.volumes_count.  Either way, the >
should be >= so that we don't go beyond the end of what we're supposed
to.

Fixes: 5c83746a0cf2 ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/blocklayout/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/nfs/blocklayout/dev.c
+++ b/fs/nfs/blocklayout/dev.c
@@ -204,7 +204,7 @@ static bool bl_map_stripe(struct pnfs_bl
 	chunk = div_u64(offset, dev->chunk_size);
 	div_u64_rem(chunk, dev->nr_children, &chunk_idx);
 
-	if (chunk_idx > dev->nr_children) {
+	if (chunk_idx >= dev->nr_children) {
 		dprintk("%s: invalid chunk idx %d (%lld/%lld)\n",
 			__func__, chunk_idx, offset, dev->chunk_size);
 		/* error, should not happen */

[PATCH 4.14 61/89] NFSv4 client live hangs after live data migration recovery

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bill Baker <Bill.Baker@Oracle.com>

commit 0f90be132cbf1537d87a6a8b9e80867adac892f6 upstream.

After a live data migration event at the NFS server, the client may send
I/O requests to the wrong server, causing a live hang due to repeated
recovery events.  On the wire, this will appear as an I/O request failing
with NFS4ERR_BADSESSION, followed by successful CREATE_SESSION, repeatedly.
NFS4ERR_BADSSESSION is returned because the session ID being used was
issued by the other server and is not valid at the old server.

The failure is caused by async worker threads having cached the transport
(xprt) in the rpc_task structure.  After the migration recovery completes,
the task is redispatched and the task resends the request to the wrong
server based on the old value still present in tk_xprt.

The solution is to recompute the tk_xprt field of the rpc_task structure
so that the request goes to the correct server.

Signed-off-by: Bill Baker <bill.baker@oracle.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Helen Chao <helen.chao@oracle.com>
Fixes: fb43d17210ba ("SUNRPC: Use the multipath iterator to assign a ...")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/nfs4proc.c           |    9 ++++++++-
 include/linux/sunrpc/clnt.h |    1 +
 net/sunrpc/clnt.c           |   28 ++++++++++++++++++++--------
 3 files changed, 29 insertions(+), 9 deletions(-)

--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -547,8 +547,15 @@ nfs4_async_handle_exception(struct rpc_t
 		ret = -EIO;
 	return ret;
 out_retry:
-	if (ret == 0)
+	if (ret == 0) {
 		exception->retry = 1;
+		/*
+		 * For NFS4ERR_MOVED, the client transport will need to
+		 * be recomputed after migration recovery has completed.
+		 */
+		if (errorcode == -NFS4ERR_MOVED)
+			rpc_task_release_transport(task);
+	}
 	return ret;
 }
 
--- a/include/linux/sunrpc/clnt.h
+++ b/include/linux/sunrpc/clnt.h
@@ -156,6 +156,7 @@ int		rpc_switch_client_transport(struct
 
 void		rpc_shutdown_client(struct rpc_clnt *);
 void		rpc_release_client(struct rpc_clnt *);
+void		rpc_task_release_transport(struct rpc_task *);
 void		rpc_task_release_client(struct rpc_task *);
 
 int		rpcb_create_local(struct net *);
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -965,10 +965,20 @@ out:
 }
 EXPORT_SYMBOL_GPL(rpc_bind_new_program);
 
+void rpc_task_release_transport(struct rpc_task *task)
+{
+	struct rpc_xprt *xprt = task->tk_xprt;
+
+	if (xprt) {
+		task->tk_xprt = NULL;
+		xprt_put(xprt);
+	}
+}
+EXPORT_SYMBOL_GPL(rpc_task_release_transport);
+
 void rpc_task_release_client(struct rpc_task *task)
 {
 	struct rpc_clnt *clnt = task->tk_client;
-	struct rpc_xprt *xprt = task->tk_xprt;
 
 	if (clnt != NULL) {
 		/* Remove from client task list */
@@ -979,12 +989,14 @@ void rpc_task_release_client(struct rpc_
 
 		rpc_release_client(clnt);
 	}
+	rpc_task_release_transport(task);
+}
 
-	if (xprt != NULL) {
-		task->tk_xprt = NULL;
-
-		xprt_put(xprt);
-	}
+static
+void rpc_task_set_transport(struct rpc_task *task, struct rpc_clnt *clnt)
+{
+	if (!task->tk_xprt)
+		task->tk_xprt = xprt_iter_get_next(&clnt->cl_xpi);
 }
 
 static
@@ -992,8 +1004,7 @@ void rpc_task_set_client(struct rpc_task
 {
 
 	if (clnt != NULL) {
-		if (task->tk_xprt == NULL)
-			task->tk_xprt = xprt_iter_get_next(&clnt->cl_xpi);
+		rpc_task_set_transport(task, clnt);
 		task->tk_client = clnt;
 		atomic_inc(&clnt->cl_count);
 		if (clnt->cl_softrtry)
@@ -1529,6 +1540,7 @@ call_start(struct rpc_task *task)
 		clnt->cl_program->version[clnt->cl_vers]->counts[idx]++;
 	clnt->cl_stats->rpccnt++;
 	task->tk_action = call_reserve;
+	rpc_task_set_transport(task, clnt);
 }
 
 /*

[PATCH 4.14 62/89] NFSv4: Fix locking in pnfs_generic_recover_commit_reqs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trondmy@gmail.com>

commit d0fbb1d8a194c0ec0180c1d073ad709e45503a43 upstream.

The use of the inode->i_lock was converted to a mutex, but we forgot
to remove the old inode unlock/lock() pair that allowed the layout
segment to be put inside the loop.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: e824f99adaaf1 ("NFSv4: Use a mutex to protect the per-inode commit...")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/pnfs_nfs.c |   16 +++++++---------
 1 file changed, 7 insertions(+), 9 deletions(-)

--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -61,7 +61,7 @@ EXPORT_SYMBOL_GPL(pnfs_generic_commit_re
 
 /* The generic layer is about to remove the req from the commit list.
  * If this will make the bucket empty, it will need to put the lseg reference.
- * Note this must be called holding i_lock
+ * Note this must be called holding nfsi->commit_mutex
  */
 void
 pnfs_generic_clear_request_commit(struct nfs_page *req,
@@ -149,9 +149,7 @@ restart:
 		if (list_empty(&b->written)) {
 			freeme = b->wlseg;
 			b->wlseg = NULL;
-			spin_unlock(&cinfo->inode->i_lock);
 			pnfs_put_lseg(freeme);
-			spin_lock(&cinfo->inode->i_lock);
 			goto restart;
 		}
 	}
@@ -167,7 +165,7 @@ static void pnfs_generic_retry_commit(st
 	LIST_HEAD(pages);
 	int i;
 
-	spin_lock(&cinfo->inode->i_lock);
+	mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
 	for (i = idx; i < fl_cinfo->nbuckets; i++) {
 		bucket = &fl_cinfo->buckets[i];
 		if (list_empty(&bucket->committing))
@@ -177,12 +175,12 @@ static void pnfs_generic_retry_commit(st
 		list_for_each(pos, &bucket->committing)
 			cinfo->ds->ncommitting--;
 		list_splice_init(&bucket->committing, &pages);
-		spin_unlock(&cinfo->inode->i_lock);
+		mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 		nfs_retry_commit(&pages, freeme, cinfo, i);
 		pnfs_put_lseg(freeme);
-		spin_lock(&cinfo->inode->i_lock);
+		mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
 	}
-	spin_unlock(&cinfo->inode->i_lock);
+	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 }
 
 static unsigned int
@@ -222,13 +220,13 @@ void pnfs_fetch_commit_bucket_list(struc
 	struct list_head *pos;
 
 	bucket = &cinfo->ds->buckets[data->ds_commit_index];
-	spin_lock(&cinfo->inode->i_lock);
+	mutex_lock(&NFS_I(cinfo->inode)->commit_mutex);
 	list_for_each(pos, &bucket->committing)
 		cinfo->ds->ncommitting--;
 	list_splice_init(&bucket->committing, pages);
 	data->lseg = bucket->clseg;
 	bucket->clseg = NULL;
-	spin_unlock(&cinfo->inode->i_lock);
+	mutex_unlock(&NFS_I(cinfo->inode)->commit_mutex);
 
 }
 

[PATCH 4.14 63/89] NFSv4: Fix a sleep in atomic context in nfs4_callback_sequence()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Trond Myklebust <trondmy@gmail.com>

commit 8618289c46556fd4dd259a1af02ccc448032f48d upstream.

We must drop the lock before we can sleep in referring_call_exists().

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Fixes: 045d2a6d076a ("NFSv4.1: Delay callback processing...")
Cc: stable@vger.kernel.org # v4.9+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/nfs/callback_proc.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -433,11 +433,14 @@ validate_seqid(const struct nfs4_slot_ta
  * a match.  If the slot is in use and the sequence numbers match, the
  * client is still waiting for a response to the original request.
  */
-static bool referring_call_exists(struct nfs_client *clp,
+static int referring_call_exists(struct nfs_client *clp,
 				  uint32_t nrclists,
-				  struct referring_call_list *rclists)
+				  struct referring_call_list *rclists,
+				  spinlock_t *lock)
+	__releases(lock)
+	__acquires(lock)
 {
-	bool status = 0;
+	int status = 0;
 	int i, j;
 	struct nfs4_session *session;
 	struct nfs4_slot_table *tbl;
@@ -460,8 +463,10 @@ static bool referring_call_exists(struct
 
 		for (j = 0; j < rclist->rcl_nrefcalls; j++) {
 			ref = &rclist->rcl_refcalls[j];
+			spin_unlock(lock);
 			status = nfs4_slot_wait_on_seqid(tbl, ref->rc_slotid,
 					ref->rc_sequenceid, HZ >> 1) < 0;
+			spin_lock(lock);
 			if (status)
 				goto out;
 		}
@@ -538,7 +543,8 @@ __be32 nfs4_callback_sequence(void *argp
 	 * related callback was received before the response to the original
 	 * call.
 	 */
-	if (referring_call_exists(clp, args->csa_nrclists, args->csa_rclists)) {
+	if (referring_call_exists(clp, args->csa_nrclists, args->csa_rclists,
+				&tbl->slot_tbl_lock) < 0) {
 		status = htonl(NFS4ERR_DELAY);
 		goto out_unlock;
 	}

[PATCH 4.14 64/89] ARM: tegra: Fix Tegra30 Cardhu PCA954x reset

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jon Hunter <jonathanh@nvidia.com>

commit 6e1811900b6fe6f2b4665dba6bd6ed32c6b98575 upstream.

On all versions of Tegra30 Cardhu, the reset signal to the NXP PCA9546
I2C mux is connected to the Tegra GPIO BB0. Currently, this pin on the
Tegra is not configured as a GPIO but as a special-function IO (SFIO)
that is multiplexing the pin to an I2S controller. On exiting system
suspend, I2C commands sent to the PCA9546 are failing because there is
no ACK. Although it is not possible to see exactly what is happening
to the reset during suspend, by ensuring it is configured as a GPIO
and driven high, to de-assert the reset, the failures are no longer
seen.

Please note that this GPIO is also used to drive the reset signal
going to the camera connector on the board. However, given that there
is no camera support currently for Cardhu, this should not have any
impact.

Fixes: 40431d16ff11 ("ARM: tegra: enable PCA9546 on Cardhu")
Cc: stable@vger.kernel.org
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/tegra30-cardhu.dtsi |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -206,6 +206,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0x70>;
+			reset-gpio = <&gpio TEGRA_GPIO(BB, 0) GPIO_ACTIVE_LOW>;
 		};
 	};
 

[PATCH 4.14 65/89] mm/tlb: Remove tlb_remove_table() non-concurrent condition

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra <peterz@infradead.org>

commit a6f572084fbee8b30f91465f4a085d7a90901c57 upstream.

Will noted that only checking mm_users is incorrect; we should also
check mm_count in order to cover CPUs that have a lazy reference to
this mm (and could do speculative TLB operations).

If removing this turns out to be a performance issue, we can
re-instate a more complete check, but in tlb_table_flush() eliding the
call_rcu_sched().

Fixes: 267239116987 ("mm, powerpc: move the RCU page-table freeing into generic code")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Miller <davem@davemloft.net>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 mm/memory.c |    9 ---------
 1 file changed, 9 deletions(-)

--- a/mm/memory.c
+++ b/mm/memory.c
@@ -392,15 +392,6 @@ void tlb_remove_table(struct mmu_gather
 {
 	struct mmu_table_batch **batch = &tlb->batch;
 
-	/*
-	 * When there's less then two users of this mm there cannot be a
-	 * concurrent page-table walk.
-	 */
-	if (atomic_read(&tlb->mm->mm_users) < 2) {
-		__tlb_remove_table(table);
-		return;
-	}
-
 	if (*batch == NULL) {
 		*batch = (struct mmu_table_batch *)__get_free_page(GFP_NOWAIT | __GFP_NOWARN);
 		if (*batch == NULL) {

[PATCH 4.14 66/89] iommu/vt-d: Add definitions for PFSID

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

commit 0f725561e168485eff7277d683405c05b192f537 upstream.

When SRIOV VF device IOTLB is invalidated, we need to provide
the PF source ID such that IOMMU hardware can gauge the depth
of invalidation queue which is shared among VFs. This is needed
when device invalidation throttle (DIT) capability is supported.

This patch adds bit definitions for checking and tracking PFSID.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/intel-iommu.c |    1 +
 include/linux/intel-iommu.h |    3 +++
 2 files changed, 4 insertions(+)

--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -422,6 +422,7 @@ struct device_domain_info {
 	struct list_head global; /* link to global list */
 	u8 bus;			/* PCI bus number */
 	u8 devfn;		/* PCI devfn number */
+	u16 pfsid;		/* SRIOV physical function source ID */
 	u8 pasid_supported:3;
 	u8 pasid_enabled:1;
 	u8 pri_supported:1;
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -112,6 +112,7 @@
  * Extended Capability Register
  */
 
+#define ecap_dit(e)		((e >> 41) & 0x1)
 #define ecap_pasid(e)		((e >> 40) & 0x1)
 #define ecap_pss(e)		((e >> 35) & 0x1f)
 #define ecap_eafs(e)		((e >> 34) & 0x1)
@@ -281,6 +282,7 @@ enum {
 #define QI_DEV_IOTLB_SID(sid)	((u64)((sid) & 0xffff) << 32)
 #define QI_DEV_IOTLB_QDEP(qdep)	(((qdep) & 0x1f) << 16)
 #define QI_DEV_IOTLB_ADDR(addr)	((u64)(addr) & VTD_PAGE_MASK)
+#define QI_DEV_IOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | ((u64)(pfsid & 0xfff) << 52))
 #define QI_DEV_IOTLB_SIZE	1
 #define QI_DEV_IOTLB_MAX_INVS	32
 
@@ -305,6 +307,7 @@ enum {
 #define QI_DEV_EIOTLB_PASID(p)	(((u64)p) << 32)
 #define QI_DEV_EIOTLB_SID(sid)	((u64)((sid) & 0xffff) << 16)
 #define QI_DEV_EIOTLB_QDEP(qd)	((u64)((qd) & 0x1f) << 4)
+#define QI_DEV_EIOTLB_PFSID(pfsid) (((u64)(pfsid & 0xf) << 12) | ((u64)(pfsid & 0xfff) << 52))
 #define QI_DEV_EIOTLB_MAX_INVS	32
 
 #define QI_PGRP_IDX(idx)	(((u64)(idx)) << 55)

[PATCH 4.14 67/89] iommu/vt-d: Fix dev iotlb pfsid use

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jacob Pan <jacob.jun.pan@linux.intel.com>

commit 1c48db44924298ad0cb5a6386b88017539be8822 upstream.

PFSID should be used in the invalidation descriptor for flushing
device IOTLBs on SRIOV VFs.

Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: "Ashok Raj" <ashok.raj@intel.com>
Cc: "Lu Baolu" <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/dmar.c        |    6 +++---
 drivers/iommu/intel-iommu.c |   17 ++++++++++++++++-
 include/linux/intel-iommu.h |    5 ++---
 3 files changed, 21 insertions(+), 7 deletions(-)

--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1336,8 +1336,8 @@ void qi_flush_iotlb(struct intel_iommu *
 	qi_submit_sync(&desc, iommu);
 }
 
-void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep,
-			u64 addr, unsigned mask)
+void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 pfsid,
+			u16 qdep, u64 addr, unsigned mask)
 {
 	struct qi_desc desc;
 
@@ -1352,7 +1352,7 @@ void qi_flush_dev_iotlb(struct intel_iom
 		qdep = 0;
 
 	desc.low = QI_DEV_IOTLB_SID(sid) | QI_DEV_IOTLB_QDEP(qdep) |
-		   QI_DIOTLB_TYPE;
+		   QI_DIOTLB_TYPE | QI_DEV_IOTLB_PFSID(pfsid);
 
 	qi_submit_sync(&desc, iommu);
 }
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -1503,6 +1503,20 @@ static void iommu_enable_dev_iotlb(struc
 		return;
 
 	pdev = to_pci_dev(info->dev);
+	/* For IOMMU that supports device IOTLB throttling (DIT), we assign
+	 * PFSID to the invalidation desc of a VF such that IOMMU HW can gauge
+	 * queue depth at PF level. If DIT is not set, PFSID will be treated as
+	 * reserved, which should be set to 0.
+	 */
+	if (!ecap_dit(info->iommu->ecap))
+		info->pfsid = 0;
+	else {
+		struct pci_dev *pf_pdev;
+
+		/* pdev will be returned if device is not a vf */
+		pf_pdev = pci_physfn(pdev);
+		info->pfsid = PCI_DEVID(pf_pdev->bus->number, pf_pdev->devfn);
+	}
 
 #ifdef CONFIG_INTEL_IOMMU_SVM
 	/* The PCIe spec, in its wisdom, declares that the behaviour of
@@ -1568,7 +1582,8 @@ static void iommu_flush_dev_iotlb(struct
 
 		sid = info->bus << 8 | info->devfn;
 		qdep = info->ats_qdep;
-		qi_flush_dev_iotlb(info->iommu, sid, qdep, addr, mask);
+		qi_flush_dev_iotlb(info->iommu, sid, info->pfsid,
+				qdep, addr, mask);
 	}
 	spin_unlock_irqrestore(&device_domain_lock, flags);
 }
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -453,9 +453,8 @@ extern void qi_flush_context(struct inte
 			     u8 fm, u64 type);
 extern void qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr,
 			  unsigned int size_order, u64 type);
-extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 qdep,
-			       u64 addr, unsigned mask);
-
+extern void qi_flush_dev_iotlb(struct intel_iommu *iommu, u16 sid, u16 pfsid,
+			u16 qdep, u64 addr, unsigned mask);
 extern int qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu);
 
 extern int dmar_ir_support(void);

[PATCH 4.14 68/89] sys: dont hold uts_sem while accessing userspace memory

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jannh@google.com>

commit 42a0cc3478584d4d63f68f2f5af021ddbea771fa upstream.

Holding uts_sem as a writer while accessing userspace memory allows a
namespace admin to stall all processes that attempt to take uts_sem.
Instead, move data through stack buffers and don't access userspace memory
while uts_sem is held.

Cc: stable@vger.kernel.org
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/alpha/kernel/osf_sys.c      |   51 +++++++++-----------
 arch/sparc/kernel/sys_sparc_32.c |   22 +++++----
 arch/sparc/kernel/sys_sparc_64.c |   20 ++++----
 kernel/sys.c                     |   95 ++++++++++++++++++---------------------
 kernel/utsname_sysctl.c          |   41 ++++++++++------
 5 files changed, 119 insertions(+), 110 deletions(-)

--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -530,24 +530,19 @@ SYSCALL_DEFINE4(osf_mount, unsigned long
 SYSCALL_DEFINE1(osf_utsname, char __user *, name)
 {
 	int error;
+	char tmp[5 * 32];
 
 	down_read(&uts_sem);
-	error = -EFAULT;
-	if (copy_to_user(name + 0, utsname()->sysname, 32))
-		goto out;
-	if (copy_to_user(name + 32, utsname()->nodename, 32))
-		goto out;
-	if (copy_to_user(name + 64, utsname()->release, 32))
-		goto out;
-	if (copy_to_user(name + 96, utsname()->version, 32))
-		goto out;
-	if (copy_to_user(name + 128, utsname()->machine, 32))
-		goto out;
+	memcpy(tmp + 0 * 32, utsname()->sysname, 32);
+	memcpy(tmp + 1 * 32, utsname()->nodename, 32);
+	memcpy(tmp + 2 * 32, utsname()->release, 32);
+	memcpy(tmp + 3 * 32, utsname()->version, 32);
+	memcpy(tmp + 4 * 32, utsname()->machine, 32);
+	up_read(&uts_sem);
 
-	error = 0;
- out:
-	up_read(&uts_sem);	
-	return error;
+	if (copy_to_user(name, tmp, sizeof(tmp)))
+		return -EFAULT;
+	return 0;
 }
 
 SYSCALL_DEFINE0(getpagesize)
@@ -567,18 +562,21 @@ SYSCALL_DEFINE2(osf_getdomainname, char
 {
 	int len, err = 0;
 	char *kname;
+	char tmp[32];
 
-	if (namelen > 32)
+	if (namelen < 0 || namelen > 32)
 		namelen = 32;
 
 	down_read(&uts_sem);
 	kname = utsname()->domainname;
 	len = strnlen(kname, namelen);
-	if (copy_to_user(name, kname, min(len + 1, namelen)))
-		err = -EFAULT;
+	len = min(len + 1, namelen);
+	memcpy(tmp, kname, len);
 	up_read(&uts_sem);
 
-	return err;
+	if (copy_to_user(name, tmp, len))
+		return -EFAULT;
+	return 0;
 }
 
 /*
@@ -739,13 +737,14 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
 	};
 	unsigned long offset;
 	const char *res;
-	long len, err = -EINVAL;
+	long len;
+	char tmp[__NEW_UTS_LEN + 1];
 
 	offset = command-1;
 	if (offset >= ARRAY_SIZE(sysinfo_table)) {
 		/* Digital UNIX has a few unpublished interfaces here */
 		printk("sysinfo(%d)", command);
-		goto out;
+		return -EINVAL;
 	}
 
 	down_read(&uts_sem);
@@ -753,13 +752,11 @@ SYSCALL_DEFINE3(osf_sysinfo, int, comman
 	len = strlen(res)+1;
 	if ((unsigned long)len > (unsigned long)count)
 		len = count;
-	if (copy_to_user(buf, res, len))
-		err = -EFAULT;
-	else
-		err = 0;
+	memcpy(tmp, res, len);
 	up_read(&uts_sem);
- out:
-	return err;
+	if (copy_to_user(buf, tmp, len))
+		return -EFAULT;
+	return 0;
 }
 
 SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
--- a/arch/sparc/kernel/sys_sparc_32.c
+++ b/arch/sparc/kernel/sys_sparc_32.c
@@ -204,23 +204,27 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig,
 
 asmlinkage long sys_getdomainname(char __user *name, int len)
 {
- 	int nlen, err;
- 	
+	int nlen, err;
+	char tmp[__NEW_UTS_LEN + 1];
+
 	if (len < 0)
 		return -EINVAL;
 
- 	down_read(&uts_sem);
- 	
+	down_read(&uts_sem);
+
 	nlen = strlen(utsname()->domainname) + 1;
 	err = -EINVAL;
 	if (nlen > len)
-		goto out;
+		goto out_unlock;
+	memcpy(tmp, utsname()->domainname, nlen);
+
+	up_read(&uts_sem);
 
-	err = -EFAULT;
-	if (!copy_to_user(name, utsname()->domainname, nlen))
-		err = 0;
+	if (copy_to_user(name, tmp, nlen))
+		return -EFAULT;
+	return 0;
 
-out:
+out_unlock:
 	up_read(&uts_sem);
 	return err;
 }
--- a/arch/sparc/kernel/sys_sparc_64.c
+++ b/arch/sparc/kernel/sys_sparc_64.c
@@ -527,23 +527,27 @@ extern void check_pending(int signum);
 
 SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len)
 {
-        int nlen, err;
+	int nlen, err;
+	char tmp[__NEW_UTS_LEN + 1];
 
 	if (len < 0)
 		return -EINVAL;
 
- 	down_read(&uts_sem);
- 	
+	down_read(&uts_sem);
+
 	nlen = strlen(utsname()->domainname) + 1;
 	err = -EINVAL;
 	if (nlen > len)
-		goto out;
+		goto out_unlock;
+	memcpy(tmp, utsname()->domainname, nlen);
+
+	up_read(&uts_sem);
 
-	err = -EFAULT;
-	if (!copy_to_user(name, utsname()->domainname, nlen))
-		err = 0;
+	if (copy_to_user(name, tmp, nlen))
+		return -EFAULT;
+	return 0;
 
-out:
+out_unlock:
 	up_read(&uts_sem);
 	return err;
 }
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1176,18 +1176,19 @@ static int override_release(char __user
 
 SYSCALL_DEFINE1(newuname, struct new_utsname __user *, name)
 {
-	int errno = 0;
+	struct new_utsname tmp;
 
 	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof *name))
-		errno = -EFAULT;
+	memcpy(&tmp, utsname(), sizeof(tmp));
 	up_read(&uts_sem);
+	if (copy_to_user(name, &tmp, sizeof(tmp)))
+		return -EFAULT;
 
-	if (!errno && override_release(name->release, sizeof(name->release)))
-		errno = -EFAULT;
-	if (!errno && override_architecture(name))
-		errno = -EFAULT;
-	return errno;
+	if (override_release(name->release, sizeof(name->release)))
+		return -EFAULT;
+	if (override_architecture(name))
+		return -EFAULT;
+	return 0;
 }
 
 #ifdef __ARCH_WANT_SYS_OLD_UNAME
@@ -1196,55 +1197,46 @@ SYSCALL_DEFINE1(newuname, struct new_uts
  */
 SYSCALL_DEFINE1(uname, struct old_utsname __user *, name)
 {
-	int error = 0;
+	struct old_utsname tmp;
 
 	if (!name)
 		return -EFAULT;
 
 	down_read(&uts_sem);
-	if (copy_to_user(name, utsname(), sizeof(*name)))
-		error = -EFAULT;
+	memcpy(&tmp, utsname(), sizeof(tmp));
 	up_read(&uts_sem);
+	if (copy_to_user(name, &tmp, sizeof(tmp)))
+		return -EFAULT;
 
-	if (!error && override_release(name->release, sizeof(name->release)))
-		error = -EFAULT;
-	if (!error && override_architecture(name))
-		error = -EFAULT;
-	return error;
+	if (override_release(name->release, sizeof(name->release)))
+		return -EFAULT;
+	if (override_architecture(name))
+		return -EFAULT;
+	return 0;
 }
 
 SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name)
 {
-	int error;
+	struct oldold_utsname tmp = {};
 
 	if (!name)
 		return -EFAULT;
-	if (!access_ok(VERIFY_WRITE, name, sizeof(struct oldold_utsname)))
-		return -EFAULT;
 
 	down_read(&uts_sem);
-	error = __copy_to_user(&name->sysname, &utsname()->sysname,
-			       __OLD_UTS_LEN);
-	error |= __put_user(0, name->sysname + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->nodename, &utsname()->nodename,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->nodename + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->release, &utsname()->release,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->release + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->version, &utsname()->version,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->version + __OLD_UTS_LEN);
-	error |= __copy_to_user(&name->machine, &utsname()->machine,
-				__OLD_UTS_LEN);
-	error |= __put_user(0, name->machine + __OLD_UTS_LEN);
+	memcpy(&tmp.sysname, &utsname()->sysname, __OLD_UTS_LEN);
+	memcpy(&tmp.nodename, &utsname()->nodename, __OLD_UTS_LEN);
+	memcpy(&tmp.release, &utsname()->release, __OLD_UTS_LEN);
+	memcpy(&tmp.version, &utsname()->version, __OLD_UTS_LEN);
+	memcpy(&tmp.machine, &utsname()->machine, __OLD_UTS_LEN);
 	up_read(&uts_sem);
+	if (copy_to_user(name, &tmp, sizeof(tmp)))
+		return -EFAULT;
 
-	if (!error && override_architecture(name))
-		error = -EFAULT;
-	if (!error && override_release(name->release, sizeof(name->release)))
-		error = -EFAULT;
-	return error ? -EFAULT : 0;
+	if (override_architecture(name))
+		return -EFAULT;
+	if (override_release(name->release, sizeof(name->release)))
+		return -EFAULT;
+	return 0;
 }
 #endif
 
@@ -1258,17 +1250,18 @@ SYSCALL_DEFINE2(sethostname, char __user
 
 	if (len < 0 || len > __NEW_UTS_LEN)
 		return -EINVAL;
-	down_write(&uts_sem);
 	errno = -EFAULT;
 	if (!copy_from_user(tmp, name, len)) {
-		struct new_utsname *u = utsname();
+		struct new_utsname *u;
 
+		down_write(&uts_sem);
+		u = utsname();
 		memcpy(u->nodename, tmp, len);
 		memset(u->nodename + len, 0, sizeof(u->nodename) - len);
 		errno = 0;
 		uts_proc_notify(UTS_PROC_HOSTNAME);
+		up_write(&uts_sem);
 	}
-	up_write(&uts_sem);
 	return errno;
 }
 
@@ -1276,8 +1269,9 @@ SYSCALL_DEFINE2(sethostname, char __user
 
 SYSCALL_DEFINE2(gethostname, char __user *, name, int, len)
 {
-	int i, errno;
+	int i;
 	struct new_utsname *u;
+	char tmp[__NEW_UTS_LEN + 1];
 
 	if (len < 0)
 		return -EINVAL;
@@ -1286,11 +1280,11 @@ SYSCALL_DEFINE2(gethostname, char __user
 	i = 1 + strlen(u->nodename);
 	if (i > len)
 		i = len;
-	errno = 0;
-	if (copy_to_user(name, u->nodename, i))
-		errno = -EFAULT;
+	memcpy(tmp, u->nodename, i);
 	up_read(&uts_sem);
-	return errno;
+	if (copy_to_user(name, tmp, i))
+		return -EFAULT;
+	return 0;
 }
 
 #endif
@@ -1309,17 +1303,18 @@ SYSCALL_DEFINE2(setdomainname, char __us
 	if (len < 0 || len > __NEW_UTS_LEN)
 		return -EINVAL;
 
-	down_write(&uts_sem);
 	errno = -EFAULT;
 	if (!copy_from_user(tmp, name, len)) {
-		struct new_utsname *u = utsname();
+		struct new_utsname *u;
 
+		down_write(&uts_sem);
+		u = utsname();
 		memcpy(u->domainname, tmp, len);
 		memset(u->domainname + len, 0, sizeof(u->domainname) - len);
 		errno = 0;
 		uts_proc_notify(UTS_PROC_DOMAINNAME);
+		up_write(&uts_sem);
 	}
-	up_write(&uts_sem);
 	return errno;
 }
 
--- a/kernel/utsname_sysctl.c
+++ b/kernel/utsname_sysctl.c
@@ -18,7 +18,7 @@
 
 #ifdef CONFIG_PROC_SYSCTL
 
-static void *get_uts(struct ctl_table *table, int write)
+static void *get_uts(struct ctl_table *table)
 {
 	char *which = table->data;
 	struct uts_namespace *uts_ns;
@@ -26,21 +26,9 @@ static void *get_uts(struct ctl_table *t
 	uts_ns = current->nsproxy->uts_ns;
 	which = (which - (char *)&init_uts_ns) + (char *)uts_ns;
 
-	if (!write)
-		down_read(&uts_sem);
-	else
-		down_write(&uts_sem);
 	return which;
 }
 
-static void put_uts(struct ctl_table *table, int write, void *which)
-{
-	if (!write)
-		up_read(&uts_sem);
-	else
-		up_write(&uts_sem);
-}
-
 /*
  *	Special case of dostring for the UTS structure. This has locks
  *	to observe. Should this be in kernel/sys.c ????
@@ -50,13 +38,34 @@ static int proc_do_uts_string(struct ctl
 {
 	struct ctl_table uts_table;
 	int r;
+	char tmp_data[__NEW_UTS_LEN + 1];
+
 	memcpy(&uts_table, table, sizeof(uts_table));
-	uts_table.data = get_uts(table, write);
+	uts_table.data = tmp_data;
+
+	/*
+	 * Buffer the value in tmp_data so that proc_dostring() can be called
+	 * without holding any locks.
+	 * We also need to read the original value in the write==1 case to
+	 * support partial writes.
+	 */
+	down_read(&uts_sem);
+	memcpy(tmp_data, get_uts(table), sizeof(tmp_data));
+	up_read(&uts_sem);
 	r = proc_dostring(&uts_table, write, buffer, lenp, ppos);
-	put_uts(table, write, uts_table.data);
 
-	if (write)
+	if (write) {
+		/*
+		 * Write back the new value.
+		 * Note that, since we dropped uts_sem, the result can
+		 * theoretically be incorrect if there are two parallel writes
+		 * at non-zero offsets to the same sysctl.
+		 */
+		down_write(&uts_sem);
+		memcpy(get_uts(table), tmp_data, sizeof(tmp_data));
+		up_write(&uts_sem);
 		proc_sys_poll_notify(table->poll);
+	}
 
 	return r;
 }

[PATCH 4.14 69/89] userns: move user access out of the mutex

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jann Horn <jannh@google.com>

commit 5820f140edef111a9ea2ef414ab2428b8cb805b1 upstream.

The old code would hold the userns_state_mutex indefinitely if
memdup_user_nul stalled due to e.g. a userfault region. Prevent that by
moving the memdup_user_nul in front of the mutex_lock().

Note: This changes the error precedence of invalid buf/count/*ppos vs
map already written / capabilities missing.

Fixes: 22d917d80e84 ("userns: Rework the user_namespace adding uid/gid...")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Christian Brauner <christian@brauner.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/user_namespace.c |   24 ++++++++++--------------
 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -650,7 +650,16 @@ static ssize_t map_write(struct file *fi
 	unsigned idx;
 	struct uid_gid_extent *extent = NULL;
 	char *kbuf = NULL, *pos, *next_line;
-	ssize_t ret = -EINVAL;
+	ssize_t ret;
+
+	/* Only allow < page size writes at the beginning of the file */
+	if ((*ppos != 0) || (count >= PAGE_SIZE))
+		return -EINVAL;
+
+	/* Slurp in the user data */
+	kbuf = memdup_user_nul(buf, count);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
 
 	/*
 	 * The userns_state_mutex serializes all writes to any given map.
@@ -684,19 +693,6 @@ static ssize_t map_write(struct file *fi
 	if (cap_valid(cap_setid) && !file_ns_capable(file, ns, CAP_SYS_ADMIN))
 		goto out;
 
-	/* Only allow < page size writes at the beginning of the file */
-	ret = -EINVAL;
-	if ((*ppos != 0) || (count >= PAGE_SIZE))
-		goto out;
-
-	/* Slurp in the user data */
-	kbuf = memdup_user_nul(buf, count);
-	if (IS_ERR(kbuf)) {
-		ret = PTR_ERR(kbuf);
-		kbuf = NULL;
-		goto out;
-	}
-
 	/* Parse the user data */
 	ret = -EINVAL;
 	pos = kbuf;

[PATCH 4.14 70/89] ubifs: Fix memory leak in lprobs self-check

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit eef19816ada3abd56d9f20c88794cc2fea83ebb2 upstream.

Allocate the buffer after we return early.
Otherwise memory is being leaked.

Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/lprops.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/fs/ubifs/lprops.c
+++ b/fs/ubifs/lprops.c
@@ -1091,10 +1091,6 @@ static int scan_check_cb(struct ubifs_in
 		}
 	}
 
-	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
-	if (!buf)
-		return -ENOMEM;
-
 	/*
 	 * After an unclean unmount, empty and freeable LEBs
 	 * may contain garbage - do not scan them.
@@ -1113,6 +1109,10 @@ static int scan_check_cb(struct ubifs_in
 		return LPT_SCAN_CONTINUE;
 	}
 
+	buf = __vmalloc(c->leb_size, GFP_NOFS, PAGE_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
 	sleb = ubifs_scan(c, lnum, 0, buf, 0);
 	if (IS_ERR(sleb)) {
 		ret = PTR_ERR(sleb);

[PATCH 4.14 71/89] Revert "UBIFS: Fix potential integer overflow in allocation"

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 08acbdd6fd736b90f8d725da5a0de4de2dd6de62 upstream.

This reverts commit 353748a359f1821ee934afc579cf04572406b420.
It bypassed the linux-mtd review process and fixes the issue not as it
should.

Cc: Kees Cook <keescook@chromium.org>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/journal.c |    5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -1283,11 +1283,10 @@ static int truncate_data_node(const stru
 			      int *new_len)
 {
 	void *buf;
-	int err, compr_type;
-	u32 dlen, out_len, old_dlen;
+	int err, dlen, compr_type, out_len, old_dlen;
 
 	out_len = le32_to_cpu(dn->size);
-	buf = kmalloc_array(out_len, WORST_COMPR_FACTOR, GFP_NOFS);
+	buf = kmalloc(out_len * WORST_COMPR_FACTOR, GFP_NOFS);
 	if (!buf)
 		return -ENOMEM;
 

[PATCH 4.14 72/89] ubifs: Check data node size before truncate

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 95a22d2084d72ea067d8323cc85677dba5d97cae upstream.

Check whether the size is within bounds before using it.
If the size is not correct, abort and dump the bad data node.

Cc: Kees Cook <keescook@chromium.org>
Cc: Silvio Cesare <silvio.cesare@gmail.com>
Cc: stable@vger.kernel.org
Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system")
Reported-by: Silvio Cesare <silvio.cesare@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/journal.c |   11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -1388,7 +1388,16 @@ int ubifs_jnl_truncate(struct ubifs_info
 		else if (err)
 			goto out_free;
 		else {
-			if (le32_to_cpu(dn->size) <= dlen)
+			int dn_len = le32_to_cpu(dn->size);
+
+			if (dn_len <= 0 || dn_len > UBIFS_BLOCK_SIZE) {
+				ubifs_err(c, "bad data node (block %u, inode %lu)",
+					  blk, inode->i_ino);
+				ubifs_dump_node(c, dn);
+				goto out_free;
+			}
+
+			if (dn_len <= dlen)
 				dlen = 0; /* Nothing to do */
 			else {
 				err = truncate_data_node(c, inode, blk, dn, &dlen);

[PATCH 4.14 73/89] ubifs: xattr: Dont operate on deleted inodes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 11a6fc3dc743e22fb50f2196ec55bee5140d3c52 upstream.

xattr operations can race with unlink and the following assert triggers:
UBIFS assert failed in ubifs_jnl_change_xattr at 1606 (pid 6256)

Fix this by checking i_nlink before working on the host inode.

Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/xattr.c |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--- a/fs/ubifs/xattr.c
+++ b/fs/ubifs/xattr.c
@@ -152,6 +152,12 @@ static int create_xattr(struct ubifs_inf
 	ui->data_len = size;
 
 	mutex_lock(&host_ui->ui_mutex);
+
+	if (!host->i_nlink) {
+		err = -ENOENT;
+		goto out_noent;
+	}
+
 	host->i_ctime = current_time(host);
 	host_ui->xattr_cnt += 1;
 	host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm));
@@ -183,6 +189,7 @@ out_cancel:
 	host_ui->xattr_size -= CALC_XATTR_BYTES(size);
 	host_ui->xattr_names -= fname_len(nm);
 	host_ui->flags &= ~UBIFS_CRYPT_FL;
+out_noent:
 	mutex_unlock(&host_ui->ui_mutex);
 out_free:
 	make_bad_inode(inode);
@@ -234,6 +241,12 @@ static int change_xattr(struct ubifs_inf
 	mutex_unlock(&ui->ui_mutex);
 
 	mutex_lock(&host_ui->ui_mutex);
+
+	if (!host->i_nlink) {
+		err = -ENOENT;
+		goto out_noent;
+	}
+
 	host->i_ctime = current_time(host);
 	host_ui->xattr_size -= CALC_XATTR_BYTES(old_size);
 	host_ui->xattr_size += CALC_XATTR_BYTES(size);
@@ -255,6 +268,7 @@ static int change_xattr(struct ubifs_inf
 out_cancel:
 	host_ui->xattr_size -= CALC_XATTR_BYTES(size);
 	host_ui->xattr_size += CALC_XATTR_BYTES(old_size);
+out_noent:
 	mutex_unlock(&host_ui->ui_mutex);
 	make_bad_inode(inode);
 out_free:
@@ -483,6 +497,12 @@ static int remove_xattr(struct ubifs_inf
 		return err;
 
 	mutex_lock(&host_ui->ui_mutex);
+
+	if (!host->i_nlink) {
+		err = -ENOENT;
+		goto out_noent;
+	}
+
 	host->i_ctime = current_time(host);
 	host_ui->xattr_cnt -= 1;
 	host_ui->xattr_size -= CALC_DENT_SIZE(fname_len(nm));
@@ -502,6 +522,7 @@ out_cancel:
 	host_ui->xattr_size += CALC_DENT_SIZE(fname_len(nm));
 	host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len);
 	host_ui->xattr_names += fname_len(nm);
+out_noent:
 	mutex_unlock(&host_ui->ui_mutex);
 	ubifs_release_budget(c, &req);
 	make_bad_inode(inode);
@@ -541,6 +562,9 @@ static int ubifs_xattr_remove(struct ino
 
 	ubifs_assert(inode_is_locked(host));
 
+	if (!host->i_nlink)
+		return -ENOENT;
+
 	if (fname_len(&nm) > UBIFS_MAX_NLEN)
 		return -ENAMETOOLONG;
 

[PATCH 4.14 74/89] ubifs: Fix synced_i_size calculation for xattr inodes

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Richard Weinberger <richard@nod.at>

commit 59965593205fa4044850d35ee3557cf0b7edcd14 upstream.

In ubifs_jnl_update() we sync parent and child inodes to the flash,
in case of xattrs, the parent inode (AKA host inode) has a non-zero
data_len. Therefore we need to adjust synced_i_size too.

This issue was reported by ubifs self tests unter a xattr related work
load.
UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: ui_size is 4, synced_i_size is 0, but inode is clean
UBIFS error (ubi0:0 pid 1896): dbg_check_synced_i_size: i_ino 65, i_mode 0x81a4, i_size 4

Cc: <stable@vger.kernel.org>
Fixes: 1e51764a3c2a ("UBIFS: add new flash file system")
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/ubifs/journal.c |    5 +++++
 1 file changed, 5 insertions(+)

--- a/fs/ubifs/journal.c
+++ b/fs/ubifs/journal.c
@@ -665,6 +665,11 @@ int ubifs_jnl_update(struct ubifs_info *
 	spin_lock(&ui->ui_lock);
 	ui->synced_i_size = ui->ui_size;
 	spin_unlock(&ui->ui_lock);
+	if (xent) {
+		spin_lock(&host_ui->ui_lock);
+		host_ui->synced_i_size = host_ui->ui_size;
+		spin_unlock(&host_ui->ui_lock);
+	}
 	mark_inode_clean(c, ui);
 	mark_inode_clean(c, host_ui);
 	return 0;

[PATCH 4.14 75/89] pwm: tiehrpwm: Dont use emulation mode bits to control PWM output

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vignesh R <vigneshr@ti.com>

commit aa49d628f6e016bcec8c6f8e704b9b18ee697329 upstream.

As per AM335x TRM SPRUH73P "15.2.2.11 ePWM Behavior During Emulation",
TBCTL[15:14] only have effect during emulation suspend events (IOW,
to stop PWM when debugging using a debugger). These bits have no effect
on PWM output during normal running of system. Hence, remove code
accessing these bits as they have no role in enabling/disabling PWMs.

Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pwm/pwm-tiehrpwm.c |   12 +-----------
 1 file changed, 1 insertion(+), 11 deletions(-)

--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -33,10 +33,6 @@
 #define TBCTL			0x00
 #define TBPRD			0x0A
 
-#define TBCTL_RUN_MASK		(BIT(15) | BIT(14))
-#define TBCTL_STOP_NEXT		0
-#define TBCTL_STOP_ON_CYCLE	BIT(14)
-#define TBCTL_FREE_RUN		(BIT(15) | BIT(14))
 #define TBCTL_PRDLD_MASK	BIT(3)
 #define TBCTL_PRDLD_SHDW	0
 #define TBCTL_PRDLD_IMDT	BIT(3)
@@ -360,7 +356,7 @@ static int ehrpwm_pwm_enable(struct pwm_
 	/* Channels polarity can be configured from action qualifier module */
 	configure_polarity(pc, pwm->hwpwm);
 
-	/* Enable TBCLK before enabling PWM device */
+	/* Enable TBCLK */
 	ret = clk_enable(pc->tbclk);
 	if (ret) {
 		dev_err(chip->dev, "Failed to enable TBCLK for %s: %d\n",
@@ -368,9 +364,6 @@ static int ehrpwm_pwm_enable(struct pwm_
 		return ret;
 	}
 
-	/* Enable time counter for free_run */
-	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_FREE_RUN);
-
 	return 0;
 }
 
@@ -400,9 +393,6 @@ static void ehrpwm_pwm_disable(struct pw
 	/* Disabling TBCLK on PWM disable */
 	clk_disable(pc->tbclk);
 
-	/* Stop Time base counter */
-	ehrpwm_modify(pc->mmio_base, TBCTL, TBCTL_RUN_MASK, TBCTL_STOP_NEXT);
-
 	/* Disable clock on PWM disable */
 	pm_runtime_put_sync(chip->dev);
 }

[PATCH 4.14 76/89] pwm: tiehrpwm: Fix disabling of output of PWMs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vignesh R <vigneshr@ti.com>

commit 38dabd91ff0bde33352ca3cc65ef515599b77a05 upstream.

pwm-tiehrpwm driver disables PWM output by putting it in low output
state via active AQCSFRC register in ehrpwm_pwm_disable(). But, the
AQCSFRC shadow register is not updated. Therefore, when shadow AQCSFRC
register is re-enabled in ehrpwm_pwm_enable() (say to enable second PWM
output), previous settings are lost as shadow register value is loaded
into active register. This results in things like PWMA getting enabled
automatically, when PWMB is enabled and vice versa. Fix this by
updating AQCSFRC shadow register as well during ehrpwm_pwm_disable().

Fixes: 19891b20e7c2 ("pwm: pwm-tiehrpwm: PWM driver support for EHRPWM")
Cc: stable@vger.kernel.org
Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pwm/pwm-tiehrpwm.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -381,6 +381,8 @@ static void ehrpwm_pwm_disable(struct pw
 		aqcsfrc_mask = AQCSFRC_CSFA_MASK;
 	}
 
+	/* Update shadow register first before modifying active register */
+	ehrpwm_modify(pc->mmio_base, AQCSFRC, aqcsfrc_mask, aqcsfrc_val);
 	/*
 	 * Changes to immediate action on Action Qualifier. This puts
 	 * Action Qualifier control on PWM output from next TBCLK

[PATCH 4.14 77/89] fb: fix lost console when the user unplugs a USB adapter

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit 8c5b044299951acd91e830a688dd920477ea1eda upstream.

I have a USB display adapter using the udlfb driver and I use it on an ARM
board that doesn't have any graphics card. When I plug the adapter in, the
console is properly displayed, however when I unplug and re-plug the
adapter, the console is not displayed and I can't access it until I reboot
the board.

The reason is this:
When the adapter is unplugged, dlfb_usb_disconnect calls
unlink_framebuffer, then it waits until the reference count drops to zero
and then it deallocates the framebuffer. However, the console that is
attached to the framebuffer device keeps the reference count non-zero, so
the framebuffer device is never destroyed. When the USB adapter is plugged
again, it creates a new device /dev/fb1 and the console is not attached to
it.

This patch fixes the bug by unbinding the console from unlink_framebuffer.
The code to unbind the console is moved from do_unregister_framebuffer to
a function unbind_console. When the console is unbound, the reference
count drops to zero and the udlfb driver frees the framebuffer. When the
adapter is plugged back, a new framebuffer is created and the console is
attached to it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Bernie Thompson <bernie@plugable.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: stable@vger.kernel.org
[b.zolnierkie: preserve old behavior for do_unregister_framebuffer()]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/video/fbdev/core/fbmem.c |   38 ++++++++++++++++++++++++++++++++------
 1 file changed, 32 insertions(+), 6 deletions(-)

--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -1716,12 +1716,12 @@ static int do_register_framebuffer(struc
 	return 0;
 }
 
-static int do_unregister_framebuffer(struct fb_info *fb_info)
+static int unbind_console(struct fb_info *fb_info)
 {
 	struct fb_event event;
-	int i, ret = 0;
+	int ret;
+	int i = fb_info->node;
 
-	i = fb_info->node;
 	if (i < 0 || i >= FB_MAX || registered_fb[i] != fb_info)
 		return -EINVAL;
 
@@ -1736,17 +1736,29 @@ static int do_unregister_framebuffer(str
 	unlock_fb_info(fb_info);
 	console_unlock();
 
+	return ret;
+}
+
+static int __unlink_framebuffer(struct fb_info *fb_info);
+
+static int do_unregister_framebuffer(struct fb_info *fb_info)
+{
+	struct fb_event event;
+	int ret;
+
+	ret = unbind_console(fb_info);
+
 	if (ret)
 		return -EINVAL;
 
 	pm_vt_switch_unregister(fb_info->dev);
 
-	unlink_framebuffer(fb_info);
+	__unlink_framebuffer(fb_info);
 	if (fb_info->pixmap.addr &&
 	    (fb_info->pixmap.flags & FB_PIXMAP_DEFAULT))
 		kfree(fb_info->pixmap.addr);
 	fb_destroy_modelist(&fb_info->modelist);
-	registered_fb[i] = NULL;
+	registered_fb[fb_info->node] = NULL;
 	num_registered_fb--;
 	fb_cleanup_device(fb_info);
 	event.info = fb_info;
@@ -1759,7 +1771,7 @@ static int do_unregister_framebuffer(str
 	return 0;
 }
 
-int unlink_framebuffer(struct fb_info *fb_info)
+static int __unlink_framebuffer(struct fb_info *fb_info)
 {
 	int i;
 
@@ -1771,6 +1783,20 @@ int unlink_framebuffer(struct fb_info *f
 		device_destroy(fb_class, MKDEV(FB_MAJOR, i));
 		fb_info->dev = NULL;
 	}
+
+	return 0;
+}
+
+int unlink_framebuffer(struct fb_info *fb_info)
+{
+	int ret;
+
+	ret = __unlink_framebuffer(fb_info);
+	if (ret)
+		return ret;
+
+	unbind_console(fb_info);
+
 	return 0;
 }
 EXPORT_SYMBOL(unlink_framebuffer);

[PATCH 4.14 78/89] udlfb: set optimal write delay

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <mpatocka@redhat.com>

commit bb24153a3f13dd0dbc1f8055ad97fe346d598f66 upstream.

The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.

In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.

This patch changes the delay to this value.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/video/udlfb.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/include/video/udlfb.h
+++ b/include/video/udlfb.h
@@ -88,7 +88,7 @@ struct dlfb_data {
 #define MIN_RAW_PIX_BYTES	2
 #define MIN_RAW_CMD_BYTES	(RAW_HEADER_BYTES + MIN_RAW_PIX_BYTES)
 
-#define DL_DEFIO_WRITE_DELAY    5 /* fb_deferred_io.delay in jiffies */
+#define DL_DEFIO_WRITE_DELAY    msecs_to_jiffies(HZ <= 300 ? 4 : 10) /* optimal value for 720p video */
 #define DL_DEFIO_WRITE_DISABLE  (HZ*60) /* "disable" with long delay */
 
 /* remove these once align.h patch is taken into kernel */

[PATCH 4.14 79/89] getxattr: use correct xattr length

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Christian Brauner <christian@brauner.io>

commit 82c9a927bc5df6e06b72d206d24a9d10cced4eb5 upstream.

When running in a container with a user namespace, if you call getxattr
with name = "system.posix_acl_access" and size % 8 != 4, then getxattr
silently skips the user namespace fixup that it normally does resulting in
un-fixed-up data being returned.
This is caused by posix_acl_fix_xattr_to_user() being passed the total
buffer size and not the actual size of the xattr as returned by
vfs_getxattr().
This commit passes the actual length of the xattr as returned by
vfs_getxattr() down.

A reproducer for the issue is:

  touch acl_posix

  setfacl -m user:0:rwx acl_posix

and the compile:

  #define _GNU_SOURCE
  #include <errno.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <string.h>
  #include <sys/types.h>
  #include <unistd.h>
  #include <attr/xattr.h>

  /* Run in user namespace with nsuid 0 mapped to uid != 0 on the host. */
  int main(int argc, void **argv)
  {
          ssize_t ret1, ret2;
          char buf1[128], buf2[132];
          int fret = EXIT_SUCCESS;
          char *file;

          if (argc < 2) {
                  fprintf(stderr,
                          "Please specify a file with "
                          "\"system.posix_acl_access\" permissions set\n");
                  _exit(EXIT_FAILURE);
          }
          file = argv[1];

          ret1 = getxattr(file, "system.posix_acl_access",
                          buf1, sizeof(buf1));
          if (ret1 < 0) {
                  fprintf(stderr, "%s - Failed to retrieve "
                                  "\"system.posix_acl_access\" "
                                  "from \"%s\"\n", strerror(errno), file);
                  _exit(EXIT_FAILURE);
          }

          ret2 = getxattr(file, "system.posix_acl_access",
                          buf2, sizeof(buf2));
          if (ret2 < 0) {
                  fprintf(stderr, "%s - Failed to retrieve "
                                  "\"system.posix_acl_access\" "
                                  "from \"%s\"\n", strerror(errno), file);
                  _exit(EXIT_FAILURE);
          }

          if (ret1 != ret2) {
                  fprintf(stderr, "The value of \"system.posix_acl_"
                                  "access\" for file \"%s\" changed "
                                  "between two successive calls\n", file);
                  _exit(EXIT_FAILURE);
          }

          for (ssize_t i = 0; i < ret2; i++) {
                  if (buf1[i] == buf2[i])
                          continue;

                  fprintf(stderr,
                          "Unexpected different in byte %zd: "
                          "%02x != %02x\n", i, buf1[i], buf2[i]);
                  fret = EXIT_FAILURE;
          }

          if (fret == EXIT_SUCCESS)
                  fprintf(stderr, "Test passed\n");
          else
                  fprintf(stderr, "Test failed\n");

          _exit(fret);
  }
and run:

  ./tester acl_posix

On a non-fixed up kernel this should return something like:

  root@c1:/# ./t
  Unexpected different in byte 16: ffffffa0 != 00
  Unexpected different in byte 17: ffffff86 != 00
  Unexpected different in byte 18: 01 != 00

and on a fixed kernel:

  root@c1:~# ./t
  Test passed

Cc: stable@vger.kernel.org
Fixes: 2f6f0654ab61 ("userns: Convert vfs posix_acl support to use kuids and kgids")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199945
Reported-by: Colin Watson <cjwatson@ubuntu.com>
Signed-off-by: Christian Brauner <christian@brauner.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/xattr.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/fs/xattr.c
+++ b/fs/xattr.c
@@ -541,7 +541,7 @@ getxattr(struct dentry *d, const char __
 	if (error > 0) {
 		if ((strcmp(kname, XATTR_NAME_POSIX_ACL_ACCESS) == 0) ||
 		    (strcmp(kname, XATTR_NAME_POSIX_ACL_DEFAULT) == 0))
-			posix_acl_fix_xattr_to_user(kvalue, size);
+			posix_acl_fix_xattr_to_user(kvalue, error);
 		if (size && copy_to_user(value, kvalue, error))
 			error = -EFAULT;
 	} else if (error == -ERANGE && size >= XATTR_SIZE_MAX) {

[PATCH 4.14 80/89] libnvdimm: fix ars_status output length calculation

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Vishal Verma <vishal.l.verma@intel.com>

commit 286e87718103acdf85f4ed323a37e4839a8a7c05 upstream.

Commit efda1b5d87cb ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling")
Introduced additional hardening for ambiguity in the ACPI spec for
ars_status output sizing. However, it had a couple of cases mixed up.
Where it should have been checking for (and returning) "out_field[1] -
4" it was using "out_field[1] - 8" and vice versa.

This caused a four byte discrepancy in the buffer size passed on to
the command handler, and in some cases, this caused memory corruption
like:

  ./daxdev-errors.sh: line 76: 24104 Aborted   (core dumped) ./daxdev-errors $busdev $region
  malloc(): memory corruption
  Program received signal SIGABRT, Aborted.
  [...]
  #5  0x00007ffff7865a2e in calloc () from /lib64/libc.so.6
  #6  0x00007ffff7bc2970 in ndctl_bus_cmd_new_ars_status (ars_cap=ars_cap@entry=0x6153b0) at ars.c:136
  #7  0x0000000000401644 in check_ars_status (check=0x7fffffffdeb0, bus=0x604c20) at daxdev-errors.c:144
  #8  test_daxdev_clear_error (region_name=<optimized out>, bus_name=<optimized out>)
      at daxdev-errors.c:332

Cc: <stable@vger.kernel.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Lukasz Dorau <lukasz.dorau@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Fixes: efda1b5d87cb ("acpi, nfit, libnvdimm: fix / harden ars_status output length handling")
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-of-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/nvdimm/bus.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -808,9 +808,9 @@ u32 nd_cmd_out_size(struct nvdimm *nvdim
 		 * overshoots the remainder by 4 bytes, assume it was
 		 * including 'status'.
 		 */
-		if (out_field[1] - 8 == remainder)
+		if (out_field[1] - 4 == remainder)
 			return remainder;
-		return out_field[1] - 4;
+		return out_field[1] - 8;
 	} else if (cmd == ND_CMD_CALL) {
 		struct nd_cmd_pkg *pkg = (struct nd_cmd_pkg *) in_field;
 

[PATCH 4.14 81/89] bcache: release dc->writeback_lock properly in bch_writeback_thread()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Shan Hai <shan.hai@oracle.com>

commit 3943b040f11ed0cc6d4585fd286a623ca8634547 upstream.

The writeback thread would exit with a lock held when the cache device
is detached via sysfs interface, fix it by releasing the held lock
before exiting the while-loop.

Fixes: fadd94e05c02 (bcache: quit dc->writeback_thread when BCACHE_DEV_DETACHING is set)
Signed-off-by: Shan Hai <shan.hai@oracle.com>
Signed-off-by: Coly Li <colyli@suse.de>
Tested-by: Shenghui Wang <shhuiw@foxmail.com>
Cc: stable@vger.kernel.org #4.17+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/bcache/writeback.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/md/bcache/writeback.c
+++ b/drivers/md/bcache/writeback.c
@@ -456,8 +456,10 @@ static int bch_writeback_thread(void *ar
 			 * data on cache. BCACHE_DEV_DETACHING flag is set in
 			 * bch_cached_dev_detach().
 			 */
-			if (test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags))
+			if (test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags)) {
+				up_write(&dc->writeback_lock);
 				break;
+			}
 		}
 
 		up_write(&dc->writeback_lock);

[PATCH 4.14 82/89] cap_inode_getsecurity: use d_find_any_alias() instead of d_find_alias()

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Eddie.Horng <eddie.horng@mediatek.com>

commit 355139a8dba446cc11a424cddbf7afebc3041ba1 upstream.

The code in cap_inode_getsecurity(), introduced by commit 8db6c34f1dbc
("Introduce v3 namespaced file capabilities"), should use
d_find_any_alias() instead of d_find_alias() do handle unhashed dentry
correctly. This is needed, for example, if execveat() is called with an
open but unlinked overlayfs file, because overlayfs unhashes dentry on
unlink.
This is a regression of real life application, first reported at
https://www.spinics.net/lists/linux-unionfs/msg05363.html

Below reproducer and setup can reproduce the case.
  const char* exec="echo";
  const char *newargv[] = { "echo", "hello", NULL};
  const char *newenviron[] = { NULL };
  int fd, err;

  fd = open(exec, O_PATH);
  unlink(exec);
  err = syscall(322/*SYS_execveat*/, fd, "", newargv, newenviron,
AT_EMPTY_PATH);
  if(err<0)
    fprintf(stderr, "execveat: %s\n", strerror(errno));

gcc compile into ~/test/a.out
mount -t overlay -orw,lowerdir=/mnt/l,upperdir=/mnt/u,workdir=/mnt/w
none /mnt/m
cd /mnt/m
cp /bin/echo .
~/test/a.out

Expected result:
hello
Actually result:
execveat: Invalid argument
dmesg:
Invalid argument reading file caps for /dev/fd/3

The 2nd reproducer and setup emulates similar case but for
regular filesystem:
  const char* exec="echo";
  int fd, err;
  char buf[256];

  fd = open(exec, O_RDONLY);
  unlink(exec);
  err = fgetxattr(fd, "security.capability", buf, 256);
  if(err<0)
    fprintf(stderr, "fgetxattr: %s\n", strerror(errno));

gcc compile into ~/test_fgetxattr

cd /tmp
cp /bin/echo .
~/test_fgetxattr

Result:
fgetxattr: Invalid argument

On regular filesystem, for example, ext4 read xattr from
disk and return to execveat(), will not trigger this issue, however,
the overlay attr handler pass real dentry to vfs_getxattr() will.
This reproducer calls fgetxattr() with an unlinked fd, involkes
vfs_getxattr() then reproduced the case that d_find_alias() in
cap_inode_getsecurity() can't find the unlinked dentry.

Suggested-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Fixes: 8db6c34f1dbc ("Introduce v3 namespaced file capabilities")
Cc: <stable@vger.kernel.org> # v4.14
Signed-off-by: Eddie Horng <eddie.horng@mediatek.com>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/commoncap.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/security/commoncap.c
+++ b/security/commoncap.c
@@ -388,7 +388,7 @@ int cap_inode_getsecurity(struct inode *
 	if (strcmp(name, "capability") != 0)
 		return -EOPNOTSUPP;
 
-	dentry = d_find_alias(inode);
+	dentry = d_find_any_alias(inode);
 	if (!dentry)
 		return -EINVAL;
 

[PATCH 4.14 83/89] perf auxtrace: Fix queue resize

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Adrian Hunter <adrian.hunter@intel.com>

commit 99cbbe56eb8bede625f410ab62ba34673ffa7d21 upstream.

When the number of queues grows beyond 32, the array of queues is
resized but not all members were being copied. Fix by also copying
'tid', 'cpu' and 'set'.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e502789302a6e ("perf auxtrace: Add helpers for queuing AUX area tracing data")
Link: http://lkml.kernel.org/r/20180814084608.6563-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 tools/perf/util/auxtrace.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -197,6 +197,9 @@ static int auxtrace_queues__grow(struct
 	for (i = 0; i < queues->nr_queues; i++) {
 		list_splice_tail(&queues->queue_array[i].head,
 				 &queue_array[i].head);
+		queue_array[i].tid = queues->queue_array[i].tid;
+		queue_array[i].cpu = queues->queue_array[i].cpu;
+		queue_array[i].set = queues->queue_array[i].set;
 		queue_array[i].priv = queues->queue_array[i].priv;
 	}
 

[PATCH 4.14 84/89] crypto: vmx - Fix sleep-in-atomic bugs

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Ondrej Mosnacek <omosnace@redhat.com>

commit 0522236d4f9c5ab2e79889cb020d1acbe5da416e upstream.

This patch fixes sleep-in-atomic bugs in AES-CBC and AES-XTS VMX
implementations. The problem is that the blkcipher_* functions should
not be called in atomic context.

The bugs can be reproduced via the AF_ALG interface by trying to
encrypt/decrypt sufficiently large buffers (at least 64 KiB) using the
VMX implementations of 'cbc(aes)' or 'xts(aes)'. Such operations then
trigger BUG in crypto_yield():

[  891.863680] BUG: sleeping function called from invalid context at include/crypto/algapi.h:424
[  891.864622] in_atomic(): 1, irqs_disabled(): 0, pid: 12347, name: kcapi-enc
[  891.864739] 1 lock held by kcapi-enc/12347:
[  891.864811]  #0: 00000000f5d42c46 (sk_lock-AF_ALG){+.+.}, at: skcipher_recvmsg+0x50/0x530
[  891.865076] CPU: 5 PID: 12347 Comm: kcapi-enc Not tainted 4.19.0-0.rc0.git3.1.fc30.ppc64le #1
[  891.865251] Call Trace:
[  891.865340] [c0000003387578c0] [c000000000d67ea4] dump_stack+0xe8/0x164 (unreliable)
[  891.865511] [c000000338757910] [c000000000172a58] ___might_sleep+0x2f8/0x310
[  891.865679] [c000000338757990] [c0000000006bff74] blkcipher_walk_done+0x374/0x4a0
[  891.865825] [c0000003387579e0] [d000000007e73e70] p8_aes_cbc_encrypt+0x1c8/0x260 [vmx_crypto]
[  891.865993] [c000000338757ad0] [c0000000006c0ee0] skcipher_encrypt_blkcipher+0x60/0x80
[  891.866128] [c000000338757b10] [c0000000006ec504] skcipher_recvmsg+0x424/0x530
[  891.866283] [c000000338757bd0] [c000000000b00654] sock_recvmsg+0x74/0xa0
[  891.866403] [c000000338757c10] [c000000000b00f64] ___sys_recvmsg+0xf4/0x2f0
[  891.866515] [c000000338757d90] [c000000000b02bb8] __sys_recvmsg+0x68/0xe0
[  891.866631] [c000000338757e30] [c00000000000bbe4] system_call+0x5c/0x70

Fixes: 8c755ace357c ("crypto: vmx - Adding CBC routines for VMX module")
Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS")
Cc: stable@vger.kernel.org
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/crypto/vmx/aes_cbc.c |   30 ++++++++++++++----------------
 drivers/crypto/vmx/aes_xts.c |   21 ++++++++++++++-------
 2 files changed, 28 insertions(+), 23 deletions(-)

--- a/drivers/crypto/vmx/aes_cbc.c
+++ b/drivers/crypto/vmx/aes_cbc.c
@@ -107,24 +107,23 @@ static int p8_aes_cbc_encrypt(struct blk
 		ret = crypto_skcipher_encrypt(req);
 		skcipher_request_zero(req);
 	} else {
-		preempt_disable();
-		pagefault_disable();
-		enable_kernel_vsx();
-
 		blkcipher_walk_init(&walk, dst, src, nbytes);
 		ret = blkcipher_walk_virt(desc, &walk);
 		while ((nbytes = walk.nbytes)) {
+			preempt_disable();
+			pagefault_disable();
+			enable_kernel_vsx();
 			aes_p8_cbc_encrypt(walk.src.virt.addr,
 					   walk.dst.virt.addr,
 					   nbytes & AES_BLOCK_MASK,
 					   &ctx->enc_key, walk.iv, 1);
+			disable_kernel_vsx();
+			pagefault_enable();
+			preempt_enable();
+
 			nbytes &= AES_BLOCK_SIZE - 1;
 			ret = blkcipher_walk_done(desc, &walk, nbytes);
 		}
-
-		disable_kernel_vsx();
-		pagefault_enable();
-		preempt_enable();
 	}
 
 	return ret;
@@ -147,24 +146,23 @@ static int p8_aes_cbc_decrypt(struct blk
 		ret = crypto_skcipher_decrypt(req);
 		skcipher_request_zero(req);
 	} else {
-		preempt_disable();
-		pagefault_disable();
-		enable_kernel_vsx();
-
 		blkcipher_walk_init(&walk, dst, src, nbytes);
 		ret = blkcipher_walk_virt(desc, &walk);
 		while ((nbytes = walk.nbytes)) {
+			preempt_disable();
+			pagefault_disable();
+			enable_kernel_vsx();
 			aes_p8_cbc_encrypt(walk.src.virt.addr,
 					   walk.dst.virt.addr,
 					   nbytes & AES_BLOCK_MASK,
 					   &ctx->dec_key, walk.iv, 0);
+			disable_kernel_vsx();
+			pagefault_enable();
+			preempt_enable();
+
 			nbytes &= AES_BLOCK_SIZE - 1;
 			ret = blkcipher_walk_done(desc, &walk, nbytes);
 		}
-
-		disable_kernel_vsx();
-		pagefault_enable();
-		preempt_enable();
 	}
 
 	return ret;
--- a/drivers/crypto/vmx/aes_xts.c
+++ b/drivers/crypto/vmx/aes_xts.c
@@ -116,32 +116,39 @@ static int p8_aes_xts_crypt(struct blkci
 		ret = enc? crypto_skcipher_encrypt(req) : crypto_skcipher_decrypt(req);
 		skcipher_request_zero(req);
 	} else {
+		blkcipher_walk_init(&walk, dst, src, nbytes);
+
+		ret = blkcipher_walk_virt(desc, &walk);
+
 		preempt_disable();
 		pagefault_disable();
 		enable_kernel_vsx();
 
-		blkcipher_walk_init(&walk, dst, src, nbytes);
-
-		ret = blkcipher_walk_virt(desc, &walk);
 		iv = walk.iv;
 		memset(tweak, 0, AES_BLOCK_SIZE);
 		aes_p8_encrypt(iv, tweak, &ctx->tweak_key);
 
+		disable_kernel_vsx();
+		pagefault_enable();
+		preempt_enable();
+
 		while ((nbytes = walk.nbytes)) {
+			preempt_disable();
+			pagefault_disable();
+			enable_kernel_vsx();
 			if (enc)
 				aes_p8_xts_encrypt(walk.src.virt.addr, walk.dst.virt.addr,
 						nbytes & AES_BLOCK_MASK, &ctx->enc_key, NULL, tweak);
 			else
 				aes_p8_xts_decrypt(walk.src.virt.addr, walk.dst.virt.addr,
 						nbytes & AES_BLOCK_MASK, &ctx->dec_key, NULL, tweak);
+			disable_kernel_vsx();
+			pagefault_enable();
+			preempt_enable();
 
 			nbytes &= AES_BLOCK_SIZE - 1;
 			ret = blkcipher_walk_done(desc, &walk, nbytes);
 		}
-
-		disable_kernel_vsx();
-		pagefault_enable();
-		preempt_enable();
 	}
 	return ret;
 }

[PATCH 4.14 88/89] fs/quota: Fix spectre gadget in do_quotactl

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jeremy Cline <jcline@redhat.com>

commit 7b6924d94a60c6b8c1279ca003e8744e6cd9e8b1 upstream.

'type' is user-controlled, so sanitize it after the bounds check to
avoid using it in speculative execution. This covers the following
potential gadgets detected with the help of smatch:

* fs/ext4/super.c:5741 ext4_quota_read() warn: potential spectre issue
  'sb_dqopt(sb)->files' [r]
* fs/ext4/super.c:5778 ext4_quota_write() warn: potential spectre issue
  'sb_dqopt(sb)->files' [r]
* fs/f2fs/super.c:1552 f2fs_quota_read() warn: potential spectre issue
  'sb_dqopt(sb)->files' [r]
* fs/f2fs/super.c:1608 f2fs_quota_write() warn: potential spectre issue
  'sb_dqopt(sb)->files' [r]
* fs/quota/dquot.c:412 mark_info_dirty() warn: potential spectre issue
  'sb_dqopt(sb)->info' [w]
* fs/quota/dquot.c:933 dqinit_needed() warn: potential spectre issue
  'dquots' [r]
* fs/quota/dquot.c:2112 dquot_commit_info() warn: potential spectre
  issue 'dqopt->ops' [r]
* fs/quota/dquot.c:2362 vfs_load_quota_inode() warn: potential spectre
  issue 'dqopt->files' [w] (local cap)
* fs/quota/dquot.c:2369 vfs_load_quota_inode() warn: potential spectre
  issue 'dqopt->ops' [w] (local cap)
* fs/quota/dquot.c:2370 vfs_load_quota_inode() warn: potential spectre
  issue 'dqopt->info' [w] (local cap)
* fs/quota/quota.c:110 quota_getfmt() warn: potential spectre issue
  'sb_dqopt(sb)->info' [r]
* fs/quota/quota_v2.c:84 v2_check_quota_file() warn: potential spectre
  issue 'quota_magics' [w]
* fs/quota/quota_v2.c:85 v2_check_quota_file() warn: potential spectre
  issue 'quota_versions' [w]
* fs/quota/quota_v2.c:96 v2_read_file_info() warn: potential spectre
  issue 'dqopt->info' [r]
* fs/quota/quota_v2.c:172 v2_write_file_info() warn: potential spectre
  issue 'dqopt->info' [r]

Additionally, a quick inspection indicates there are array accesses with
'type' in quota_on() and quota_off() functions which are also addressed
by this.

Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/quota/quota.c |    2 ++
 1 file changed, 2 insertions(+)

--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -18,6 +18,7 @@
 #include <linux/quotaops.h>
 #include <linux/types.h>
 #include <linux/writeback.h>
+#include <linux/nospec.h>
 
 static int check_quotactl_permission(struct super_block *sb, int type, int cmd,
 				     qid_t id)
@@ -703,6 +704,7 @@ static int do_quotactl(struct super_bloc
 
 	if (type >= (XQM_COMMAND(cmd) ? XQM_MAXQUOTAS : MAXQUOTAS))
 		return -EINVAL;
+	type = array_index_nospec(type, MAXQUOTAS);
 	/*
 	 * Quota not supported on this fs? Check this before s_quota_types
 	 * since they needn't be set if quota is not supported at all.

[PATCH 4.14 89/89] arm64: mm: always enable CONFIG_HOLES_IN_ZONE

[Greg Kroah-Hartman]

4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: James Morse <james.morse@arm.com>

commit f52bb98f5aded4c43e52f5ce19fb83f7261e9e73 upstream.

Commit 6d526ee26ccd ("arm64: mm: enable CONFIG_HOLES_IN_ZONE for NUMA")
only enabled HOLES_IN_ZONE for NUMA systems because the NUMA code was
choking on the missing zone for nomap pages. This problem doesn't just
apply to NUMA systems.

If the architecture doesn't set HAVE_ARCH_PFN_VALID, pfn_valid() will
return true if the pfn is part of a valid sparsemem section.

When working with multiple pages, the mm code uses pfn_valid_within()
to test each page it uses within the sparsemem section is valid. On
most systems memory comes in MAX_ORDER_NR_PAGES chunks which all
have valid/initialised struct pages. In this case pfn_valid_within()
is optimised out.

Systems where this isn't true (e.g. due to nomap) should set
HOLES_IN_ZONE and provide HAVE_ARCH_PFN_VALID so that mm tests each
page as it works with it.

Currently non-NUMA arm64 systems can't enable HOLES_IN_ZONE, leading to
a VM_BUG_ON():

| page:fffffdff802e1780 is uninitialized and poisoned
| raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
| raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
| page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
| ------------[ cut here ]------------
| kernel BUG at include/linux/mm.h:978!
| Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[...]
| CPU: 1 PID: 25236 Comm: dd Not tainted 4.18.0 #7
| Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
| pstate: 40000085 (nZcv daIf -PAN -UAO)
| pc : move_freepages_block+0x144/0x248
| lr : move_freepages_block+0x144/0x248
| sp : fffffe0071177680
[...]
| Process dd (pid: 25236, stack limit = 0x0000000094cc07fb)
| Call trace:
|  move_freepages_block+0x144/0x248
|  steal_suitable_fallback+0x100/0x16c
|  get_page_from_freelist+0x440/0xb20
|  __alloc_pages_nodemask+0xe8/0x838
|  new_slab+0xd4/0x418
|  ___slab_alloc.constprop.27+0x380/0x4a8
|  __slab_alloc.isra.21.constprop.26+0x24/0x34
|  kmem_cache_alloc+0xa8/0x180
|  alloc_buffer_head+0x1c/0x90
|  alloc_page_buffers+0x68/0xb0
|  create_empty_buffers+0x20/0x1ec
|  create_page_buffers+0xb0/0xf0
|  __block_write_begin_int+0xc4/0x564
|  __block_write_begin+0x10/0x18
|  block_write_begin+0x48/0xd0
|  blkdev_write_begin+0x28/0x30
|  generic_perform_write+0x98/0x16c
|  __generic_file_write_iter+0x138/0x168
|  blkdev_write_iter+0x80/0xf0
|  __vfs_write+0xe4/0x10c
|  vfs_write+0xb4/0x168
|  ksys_write+0x44/0x88
|  sys_write+0xc/0x14
|  el0_svc_naked+0x30/0x34
| Code: aa1303e0 90001a01 91296421 94008902 (d4210000)
| ---[ end trace 1601ba47f6e883fe ]---

Remove the NUMA dependency.

Link: https://www.spinics.net/lists/arm-kernel/msg671851.html
Cc: <stable@vger.kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Pavel Tatashin <pavel.tatashin@microsoft.com>
Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm64/Kconfig |    1 -
 1 file changed, 1 deletion(-)

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -693,7 +693,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
 
 config HOLES_IN_ZONE
 	def_bool y
-	depends on NUMA
 
 source kernel/Kconfig.preempt
 source kernel/Kconfig.hz

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Nathan Chancellor]

On Fri, Sep 07, 2018 at 11:08:54PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.69 release.
> There are 89 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.69-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Merged, compiled, and installed onto my Raspberry Pi.

No initial issues noticed in dmesg or general usage.

Thanks!
Nathan

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Greg Kroah-Hartman]

On Fri, Sep 07, 2018 at 03:37:37PM -0700, Nathan Chancellor wrote:
> On Fri, Sep 07, 2018 at 11:08:54PM +0200, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.69 release.
> > There are 89 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
> > Anything received after that time might be too late.
> > 
> > The whole patch series can be found in one patch at:
> > 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.69-rc1.gz
> > or in the git tree and branch at:
> > 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> > 
> > thanks,
> > 
> > greg k-h
> > 
> 
> Merged, compiled, and installed onto my Raspberry Pi.
> 
> No initial issues noticed in dmesg or general usage.

Great, thanks for testing three of these and letting me know.

greg k-h

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Guenter Roeck]

On 09/07/2018 02:08 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.69 release.
> There are 89 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
> Anything received after that time might be too late.
> 

Build results:
	total: 151 pass: 149 fail: 2
Failed builds:
	powerpc:defconfig
	powerpc:allmodconfig
Qemu test results:
	total: 311 pass: 293 fail: 18
Failed tests:
	powerpc:mac99:ppc64_book3s_defconfig:nosmp:initrd
	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:initrd
	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:ide:rootfs
	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:mmc:rootfs
	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:scsi[DC395]:rootfs
	powerpc:pseries:pseries_defconfig:initrd
	powerpc:pseries:pseries_defconfig:scsi:rootfs
	powerpc:pseries:pseries_defconfig:mmc:rootfs
	powerpc:pseries:pseries_defconfig:nvme:rootfs
	powerpc:pseries:pseries_defconfig:sata-sii3112:rootfs
	powerpc:pseries:pseries_defconfig:little:initrd
	powerpc:pseries:pseries_defconfig:little:scsi:rootfs
	powerpc:pseries:pseries_defconfig:little:sata-sii3112:rootfs
	powerpc:pseries:pseries_defconfig:little:scsi[MEGASAS]:rootfs
	powerpc:pseries:pseries_defconfig:little:scsi[FUSION]:rootfs
	powerpc:pseries:pseries_defconfig:little:mmc:rootfs
	powerpc:pseries:pseries_defconfig:little:nvme:rootfs
	powerpc:powernv:powernv_defconfig:initrd

Details are available at https://kerneltests.org/builders/.

Guenter

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Naresh Kamboju]

On 8 September 2018 at 02:38, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
> This is the start of the stable review cycle for the 4.14.69 release.
> There are 89 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.69-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64 and i386.


Summary
------------------------------------------------------------------------

kernel: 4.14.69-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: c5a43c17e80b7b35788d3df112f959251d7be8fa
git describe: v4.14.67-257-gc5a43c17e80b
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.67-257-gc5a43c17e80b

No regressions (compared to build v4.14.67-167-ge2d662d77f7a)



Boards, architectures and test suites:
-------------------------------------

dragonboard-410c - arm64
* boot - pass: 17, fail: 4
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 26, skip: 9,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-nptl-tests - pass: 2,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1014, skip: 135,
* ltp-timers-tests - pass: 13,

hi6220-hikey - arm64
* boot - pass: 21,
* kselftest - pass: 58, skip: 43, fail: 9
* libhugetlbfs - pass: 89, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 27, skip: 8,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1013, skip: 136,
* ltp-timers-tests - pass: 13,

i386
* boot - pass: 22,
* kselftest - pass: 75, skip: 45, fail: 12
* libhugetlbfs - pass: 1,
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 28, skip: 4, fail: 3
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 59, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 10,
* ltp-nptl-tests - pass: 2,
* ltp-open-posix-tests - pass: 1686, skip: 43, fail: 5
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1087, skip: 59, fail: 2
* ltp-timers-tests - pass: 13,

juno-r2 - arm64
* boot - pass: 22,
* kselftest - pass: 53, skip: 46, fail: 10
* libhugetlbfs - pass: 89, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-open-posix-tests - pass: 1689, skip: 41, fail: 5
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1014, skip: 135,
* ltp-timers-tests - pass: 13,

qemu_arm
* boot - pass: 21,
* kselftest - pass: 48, skip: 54, fail: 6
* libhugetlbfs - pass: 86, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 79, skip: 2,
* ltp-cve-tests - pass: 23, skip: 12,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 5,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 8, skip: 6,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1050, skip: 99,
* ltp-timers-tests - pass: 13,

qemu_arm64
* boot - pass: 21,
* kselftest - pass: 52, skip: 51, fail: 9
* libhugetlbfs - pass: 89, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 25, skip: 10,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 8, skip: 6,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 990, skip: 159,
* ltp-timers-tests - pass: 13,

qemu_i386
* boot - pass: 21,
* kselftest - pass: 73, skip: 49, fail: 11
* libhugetlbfs - pass: 86, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 29, skip: 4, fail: 2
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 21, skip: 1,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1058, skip: 91,
* ltp-timers-tests - pass: 13,

qemu_x86_64
* boot - pass: 21,
* kselftest - pass: 63, skip: 50, fail: 7
* libhugetlbfs - pass: 89, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 30, skip: 5,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 60, skip: 6,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-[ - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 994, skip: 155,
* ltp-timers-tests - pass: 13,

x15 - arm
* boot - pass: 22,
* kselftest - pass: 51, skip: 49, fail: 6
* libhugetlbfs - pass: 86, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 79, skip: 2,
* ltp-cve-tests - pass: 25, skip: 10,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 5,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 20, skip: 2,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-open-posix-tests - pass: 1690, skip: 40, fail: 5
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 14,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1071, skip: 78,
* ltp-timers-tests - pass: 13,

x86_64
* boot - pass: 24,
* kselftest - pass: 71, skip: 47, fail: 7
* kselftest-vsyscall-mode-native - pass: 71, skip: 47, fail: 8
* kselftest-vsyscall-mode-none - pass: 72, skip: 48, fail: 7
* libhugetlbfs - pass: 89, skip: 1, fail: 1
* ltp-cap_bounds-tests - pass: 2,
* ltp-containers-tests - pass: 80, skip: 1,
* ltp-cve-tests - pass: 30, skip: 5,
* ltp-fcntl-locktests-tests - pass: 2,
* ltp-filecaps-tests - pass: 2,
* ltp-fs-tests - pass: 61, skip: 5,
* ltp-fs_bind-tests - pass: 2,
* ltp-fs_perms_simple-tests - pass: 19,
* ltp-fsx-tests - pass: 2,
* ltp-hugetlb-tests - pass: 22,
* ltp-io-tests - pass: 3,
* ltp-ipc-tests - pass: 9,
* ltp-math-tests - pass: 11,
* ltp-nptl-tests - pass: 2,
* ltp-open-posix-tests - pass: 1685, skip: 44, fail: 6
* ltp-pty-tests - pass: 4,
* ltp-sched-tests - pass: 10, skip: 4,
* ltp-securebits-tests - pass: 4,
* ltp-syscalls-tests - pass: 1031, skip: 118,
* ltp-timers-tests - pass: 13,



-- 
Linaro QA (BETA)
https://qa-reports.linaro.org

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Greg Kroah-Hartman]

On Sat, Sep 08, 2018 at 02:16:02PM -0700, Guenter Roeck wrote:
> On 09/07/2018 02:08 PM, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.69 release.
> > There are 89 patches in this series, all will be posted as a response
> > to this one.  If anyone has any issues with these being applied, please
> > let me know.
> > 
> > Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
> > Anything received after that time might be too late.
> > 
> 
> Build results:
> 	total: 151 pass: 149 fail: 2
> Failed builds:
> 	powerpc:defconfig
> 	powerpc:allmodconfig
> Qemu test results:
> 	total: 311 pass: 293 fail: 18
> Failed tests:
> 	powerpc:mac99:ppc64_book3s_defconfig:nosmp:initrd
> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:initrd
> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:ide:rootfs
> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:mmc:rootfs
> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:scsi[DC395]:rootfs
> 	powerpc:pseries:pseries_defconfig:initrd
> 	powerpc:pseries:pseries_defconfig:scsi:rootfs
> 	powerpc:pseries:pseries_defconfig:mmc:rootfs
> 	powerpc:pseries:pseries_defconfig:nvme:rootfs
> 	powerpc:pseries:pseries_defconfig:sata-sii3112:rootfs
> 	powerpc:pseries:pseries_defconfig:little:initrd
> 	powerpc:pseries:pseries_defconfig:little:scsi:rootfs
> 	powerpc:pseries:pseries_defconfig:little:sata-sii3112:rootfs
> 	powerpc:pseries:pseries_defconfig:little:scsi[MEGASAS]:rootfs
> 	powerpc:pseries:pseries_defconfig:little:scsi[FUSION]:rootfs
> 	powerpc:pseries:pseries_defconfig:little:mmc:rootfs
> 	powerpc:pseries:pseries_defconfig:little:nvme:rootfs
> 	powerpc:powernv:powernv_defconfig:initrd
> 
> Details are available at https://kerneltests.org/builders/.

Should now be fixed up, I've pushed out a -rc2 for this.

thanks,

greg k-h

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Guenter Roeck]

On 09/09/2018 01:43 AM, Greg Kroah-Hartman wrote:
> On Sat, Sep 08, 2018 at 02:16:02PM -0700, Guenter Roeck wrote:
>> On 09/07/2018 02:08 PM, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 4.14.69 release.
>>> There are 89 patches in this series, all will be posted as a response
>>> to this one.  If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
>>> Anything received after that time might be too late.
>>>
>>
>> Build results:
>> 	total: 151 pass: 149 fail: 2
>> Failed builds:
>> 	powerpc:defconfig
>> 	powerpc:allmodconfig
>> Qemu test results:
>> 	total: 311 pass: 293 fail: 18
>> Failed tests:
>> 	powerpc:mac99:ppc64_book3s_defconfig:nosmp:initrd
>> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:initrd
>> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:ide:rootfs
>> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:mmc:rootfs
>> 	powerpc:mac99:ppc64_book3s_defconfig:smp:cpu4:scsi[DC395]:rootfs
>> 	powerpc:pseries:pseries_defconfig:initrd
>> 	powerpc:pseries:pseries_defconfig:scsi:rootfs
>> 	powerpc:pseries:pseries_defconfig:mmc:rootfs
>> 	powerpc:pseries:pseries_defconfig:nvme:rootfs
>> 	powerpc:pseries:pseries_defconfig:sata-sii3112:rootfs
>> 	powerpc:pseries:pseries_defconfig:little:initrd
>> 	powerpc:pseries:pseries_defconfig:little:scsi:rootfs
>> 	powerpc:pseries:pseries_defconfig:little:sata-sii3112:rootfs
>> 	powerpc:pseries:pseries_defconfig:little:scsi[MEGASAS]:rootfs
>> 	powerpc:pseries:pseries_defconfig:little:scsi[FUSION]:rootfs
>> 	powerpc:pseries:pseries_defconfig:little:mmc:rootfs
>> 	powerpc:pseries:pseries_defconfig:little:nvme:rootfs
>> 	powerpc:powernv:powernv_defconfig:initrd
>>
>> Details are available at https://kerneltests.org/builders/.
> 
> Should now be fixed up, I've pushed out a -rc2 for this.
> 

For v4.14.68-91-g3101c84a1a08:

Build results:
	total: 151 pass: 151 fail: 0
Qemu test results:
	total: 311 pass: 311 fail: 0

Guenter

Re: [PATCH 4.14 00/89] 4.14.69-stable review

[Shuah Khan]

On 09/07/2018 03:08 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.69 release.
> There are 89 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun Sep  9 21:08:28 UTC 2018.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.69-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah