All of lore.kernel.org
 help / color / mirror / Atom feed
From: Akashi, Takahiro <takahiro.akashi@linaro.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 09/26] fs: fat: refactor write interface for a file offset
Date: Tue, 11 Sep 2018 15:59:05 +0900	[thread overview]
Message-ID: <20180911065922.19141-10-takahiro.akashi@linaro.org> (raw)
In-Reply-To: <20180911065922.19141-1-takahiro.akashi@linaro.org>

From: AKASHI Takahiro <takahiro.akashi@linaro.org>

The current write implementation is quite simple: remove existing clusters
and then allocating new ones and filling them with data. This, inevitably,
enforces always writing from the beginning of a file.

As the first step to lift this restriction, fat_file_write() and
set_contents() are modified to accept an additional parameter, file offset
and further re-factored so that, in the next patch, all the necessary code
will be put into set_contents().

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
---
 fs/fat/fat_write.c | 179 ++++++++++++++++-----------------------------
 1 file changed, 65 insertions(+), 114 deletions(-)

diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c
index 37ef0564eb5e..c22d8c7a46a1 100644
--- a/fs/fat/fat_write.c
+++ b/fs/fat/fat_write.c
@@ -528,6 +528,42 @@ static int clear_fatent(fsdata *mydata, __u32 entry)
 	return 0;
 }
 
+/*
+ * Set start cluster in directory entry
+ */
+static void set_start_cluster(const fsdata *mydata, dir_entry *dentptr,
+			      __u32 start_cluster)
+{
+	if (mydata->fatsize == 32)
+		dentptr->starthi =
+			cpu_to_le16((start_cluster & 0xffff0000) >> 16);
+	dentptr->start = cpu_to_le16(start_cluster & 0xffff);
+}
+
+/*
+ * Check whether adding a file makes the file system to
+ * exceed the size of the block device
+ * Return -1 when overflow occurs, otherwise return 0
+ */
+static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size)
+{
+	__u32 startsect, sect_num, offset;
+
+	if (clustnum > 0)
+		startsect = clust_to_sect(mydata, clustnum);
+	else
+		startsect = mydata->rootdir_sect;
+
+	sect_num = div_u64_rem(size, mydata->sect_size, &offset);
+
+	if (offset != 0)
+		sect_num++;
+
+	if (startsect + sect_num > total_sector)
+		return -1;
+	return 0;
+}
+
 /*
  * Write at most 'maxsize' bytes from 'buffer' into
  * the file associated with 'dentptr'
@@ -535,29 +571,36 @@ static int clear_fatent(fsdata *mydata, __u32 entry)
  * or return -1 on fatal errors.
  */
 static int
-set_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
-	      loff_t maxsize, loff_t *gotsize)
+set_contents(fsdata *mydata, dir_entry *dentptr, loff_t pos, __u8 *buffer,
+	     loff_t maxsize, loff_t *gotsize)
 {
-	loff_t filesize = FAT2CPU32(dentptr->size);
+	loff_t filesize;
 	unsigned int bytesperclust = mydata->clust_size * mydata->sect_size;
 	__u32 curclust = START(dentptr);
 	__u32 endclust = 0, newclust = 0;
 	loff_t actsize;
 
 	*gotsize = 0;
-	debug("Filesize: %llu bytes\n", filesize);
-
-	if (maxsize > 0 && filesize > maxsize)
-		filesize = maxsize;
+	filesize = maxsize;
 
 	debug("%llu bytes\n", filesize);
 
-	if (!curclust) {
-		if (filesize) {
-			debug("error: nonempty clusterless file!\n");
+	if (curclust) {
+		/*
+		 * release already-allocated clusters anyway
+		 */
+		if (clear_fatent(mydata, curclust)) {
+			printf("Error: clearing FAT entries\n");
 			return -1;
 		}
-		return 0;
+	}
+
+	curclust = find_empty_cluster(mydata);
+	set_start_cluster(mydata, dentptr, curclust);
+
+	if (check_overflow(mydata, curclust, filesize)) {
+		printf("Error: no space left: %llu\n", filesize);
+		return -1;
 	}
 
 	actsize = bytesperclust;
@@ -568,6 +611,7 @@ set_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
 			newclust = determine_fatent(mydata, endclust);
 
 			if ((newclust - 1) != endclust)
+				/* write to <curclust..endclust> */
 				goto getit;
 
 			if (CHECK_CLUST(newclust, mydata->fatsize)) {
@@ -614,18 +658,8 @@ getit:
 		actsize = bytesperclust;
 		curclust = endclust = newclust;
 	} while (1);
-}
 
-/*
- * Set start cluster in directory entry
- */
-static void set_start_cluster(const fsdata *mydata, dir_entry *dentptr,
-				__u32 start_cluster)
-{
-	if (mydata->fatsize == 32)
-		dentptr->starthi =
-			cpu_to_le16((start_cluster & 0xffff0000) >> 16);
-	dentptr->start = cpu_to_le16(start_cluster & 0xffff);
+	return 0;
 }
 
 /*
@@ -642,31 +676,6 @@ static void fill_dentry(fsdata *mydata, dir_entry *dentptr,
 	set_name(dentptr, filename);
 }
 
-/*
- * Check whether adding a file makes the file system to
- * exceed the size of the block device
- * Return -1 when overflow occurs, otherwise return 0
- */
-static int check_overflow(fsdata *mydata, __u32 clustnum, loff_t size)
-{
-	__u32 startsect, sect_num, offset;
-
-	if (clustnum > 0) {
-		startsect = clust_to_sect(mydata, clustnum);
-	} else {
-		startsect = mydata->rootdir_sect;
-	}
-
-	sect_num = div_u64_rem(size, mydata->sect_size, &offset);
-
-	if (offset != 0)
-		sect_num++;
-
-	if (startsect + sect_num > total_sector)
-		return -1;
-	return 0;
-}
-
 /*
  * Find a directory entry based on filename or start cluster number
  * If the directory entry is not found,
@@ -784,11 +793,10 @@ static int normalize_longname(char *l_filename, const char *filename)
 	return 0;
 }
 
-static int do_fat_write(const char *filename, void *buffer, loff_t size,
-			loff_t *actwrite)
+int file_fat_write_at(const char *filename, loff_t pos, void *buffer,
+		      loff_t size, loff_t *actwrite)
 {
 	dir_entry *retdent;
-	__u32 start_cluster;
 	fsdata datablock = { .fatbuf = NULL, };
 	fsdata *mydata = &datablock;
 	fat_itr *itr = NULL;
@@ -796,6 +804,8 @@ static int do_fat_write(const char *filename, void *buffer, loff_t size,
 	char *filename_copy, *parent, *basename;
 	char l_filename[VFAT_MAXLEN_BYTES];
 
+	debug("writing %s\n", filename);
+
 	filename_copy = strdup(filename);
 	if (!filename_copy)
 		return -ENOMEM;
@@ -839,47 +849,8 @@ static int do_fat_write(const char *filename, void *buffer, loff_t size,
 			goto exit;
 		}
 
-		/* Update file size and start_cluster in a directory entry */
-		retdent->size = cpu_to_le32(size);
-		start_cluster = START(retdent);
-
-		if (start_cluster) {
-			if (size) {
-				ret = check_overflow(mydata, start_cluster,
-							size);
-				if (ret) {
-					printf("Error: %llu overflow\n", size);
-					ret = -ENOSPC;
-					goto exit;
-				}
-			}
-
-			ret = clear_fatent(mydata, start_cluster);
-			if (ret) {
-				printf("Error: clearing FAT entries\n");
-				ret = -EIO;
-				goto exit;
-			}
-
-			if (!size)
-				set_start_cluster(mydata, retdent, 0);
-		} else if (size) {
-			ret = start_cluster = find_empty_cluster(mydata);
-			if (ret < 0) {
-				printf("Error: finding empty cluster\n");
-				ret = -ENOSPC;
-				goto exit;
-			}
-
-			ret = check_overflow(mydata, start_cluster, size);
-			if (ret) {
-				printf("Error: %llu overflow\n", size);
-				ret = -ENOSPC;
-				goto exit;
-			}
-
-			set_start_cluster(mydata, retdent, start_cluster);
-		}
+		/* Update file size in a directory entry */
+		retdent->size = cpu_to_le32(pos + size);
 	} else {
 		/* Create a new file */
 
@@ -907,32 +878,13 @@ static int do_fat_write(const char *filename, void *buffer, loff_t size,
 			goto exit;
 		}
 
-		if (size) {
-			ret = start_cluster = find_empty_cluster(mydata);
-			if (ret < 0) {
-				printf("Error: finding empty cluster\n");
-				ret = -ENOSPC;
-				goto exit;
-			}
-
-			ret = check_overflow(mydata, start_cluster, size);
-			if (ret) {
-				printf("Error: %llu overflow\n", size);
-				ret = -ENOSPC;
-				goto exit;
-			}
-		} else {
-			start_cluster = 0;
-		}
-
 		/* Set attribute as archive for regular file */
-		fill_dentry(itr->fsdata, itr->dent, filename,
-			    start_cluster, size, 0x20);
+		fill_dentry(itr->fsdata, itr->dent, filename, 0, size, 0x20);
 
 		retdent = itr->dent;
 	}
 
-	ret = set_contents(mydata, retdent, buffer, size, actwrite);
+	ret = set_contents(mydata, retdent, pos, buffer, size, actwrite);
 	if (ret < 0) {
 		printf("Error: writing contents\n");
 		ret = -EIO;
@@ -971,6 +923,5 @@ int file_fat_write(const char *filename, void *buffer, loff_t offset,
 		return -EINVAL;
 	}
 
-	printf("writing %s\n", filename);
-	return do_fat_write(filename, buffer, maxsize, actwrite);
+	return file_fat_write_at(filename, offset, buffer, maxsize, actwrite);
 }
-- 
2.18.0

  parent reply	other threads:[~2018-09-11  6:59 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-11  6:58 [U-Boot] [PATCH v3 00/26] subject: fs: fat: extend FAT write operations Akashi, Takahiro
2018-09-11  6:58 ` [U-Boot] [PATCH v3 01/26] fs: fat: guard the content of include/fat.h Akashi, Takahiro
2018-09-11 10:12   ` Alexander Graf
2018-09-12  0:53     ` Akashi, Takahiro
2018-09-12  5:41       ` Alexander Graf
2018-09-12  6:55   ` [U-Boot] [PATCH v3.1 " Akashi, Takahiro
2018-09-23 14:42     ` Alexander Graf
2018-09-25  4:54       ` Akashi, Takahiro
2018-09-11  6:58 ` [U-Boot] [PATCH v3 02/26] fs: fat: extend get_fs_info() for write use Akashi, Takahiro
2018-09-11  6:58 ` [U-Boot] [PATCH v3 03/26] fs: fat: handle "." and ".." of root dir correctly with fat_itr_resolve() Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 04/26] fs: fat: assure iterator's ->dent belongs to ->clust Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 05/26] Revert "fs: fat: cannot write to subdirectories" Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 06/26] fs: fat: check and normalize file name Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 07/26] fs: fat: write returns error code instead of -1 Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 08/26] fs: fat: support write with sub-directory path Akashi, Takahiro
2018-09-11  6:59 ` Akashi, Takahiro [this message]
2019-03-12  8:41   ` [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" fatwrite followed by fatload and then cmp fails Faiz Abbas
2019-03-13 17:11     ` Rizvi, Mohammad Faiz Abbas
2019-03-13 17:25       ` Tom Rini
2019-03-18  1:42     ` Akashi, Takahiro
2019-03-18  1:44       ` Tom Rini
2019-03-18  1:57         ` Akashi, Takahiro
2019-03-18  1:59           ` Tom Rini
2019-03-21  6:50             ` Faiz Abbas
2019-03-22  9:13               ` Faiz Abbas
2018-09-11  6:59 ` [U-Boot] [PATCH v3 10/26] fs: fat: support write with non-zero offset Akashi, Takahiro
2018-09-11 11:09   ` Alexander Graf
2018-09-12  2:14     ` Akashi, Takahiro
2018-09-12  5:42       ` Alexander Graf
2018-10-15 11:42   ` Jean-Jacques Hiblot
2018-10-31 10:00     ` Clément Péron
2018-10-31 12:22       ` Alexander Graf
2018-10-31 20:54         ` Heinrich Schuchardt
2018-11-01  5:11           ` AKASHI Takahiro
2018-11-05 16:44             ` Clément Péron
2019-02-25 18:20   ` [U-Boot] [BUG] cb8af8af5ba0 "fs: fat: support write with non-zero offset" leads to link error Heinrich Schuchardt
2018-09-11  6:59 ` [U-Boot] [PATCH v3 11/26] cmd: fat: add offset parameter to fatwrite Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 12/26] fs: add mkdir interface Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 13/26] fs: fat: remember the starting cluster number of directory Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 14/26] fs: fat: support mkdir Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 15/26] cmd: fat: add fatmkdir command Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 16/26] efi_loader: file: support creating a directory Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 17/26] fs: add unlink interface Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 18/26] fs: fat: support unlink Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 19/26] cmd: fat: add fatrm command Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 20/26] efi_loader: implement a file delete Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 21/26] fs-test: fix false positive error at Test Case 12 Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 22/26] fs-test: update the test result as of v2018.09 Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 23/26] test/py: convert fs-test.sh to pytest Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 24/26] test/py: fs: add extended write operation test Akashi, Takahiro
2018-09-11  6:59 ` [U-Boot] [PATCH v3 25/26] test/py: fs: add fstest/mkdir test Akashi, Takahiro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180911065922.19141-10-takahiro.akashi@linaro.org \
    --to=takahiro.akashi@linaro.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.