From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Mika Westerberg To: Bjorn Helgaas , "Rafael J. Wysocki" Cc: Len Brown , Lukas Wunner , Keith Busch , Ashok Raj , Mario.Limonciello@dell.com, Anthony Wong , Linus Walleij , Sakari Ailus , Mika Westerberg , linux-pci@vger.kernel.org, linux-acpi@vger.kernel.org Subject: [PATCH RESEND v2 01/10] PCI: Do not skip power managed bridges in pci_enable_wake() Date: Fri, 14 Sep 2018 11:31:34 +0300 Message-Id: <20180914083134.27217-1-mika.westerberg@linux.intel.com> In-Reply-To: <153688100.j3IOAyprJL@aspire.rjw.lan> References: <153688100.j3IOAyprJL@aspire.rjw.lan> Sender: linux-acpi-owner@vger.kernel.org List-ID: Commit baecc470d5fd ("PCI / PM: Skip bridges in pci_enable_wake()") changed pci_enable_wake() so that all bridges are skipped when wakeup is enabled (or disabled) with the reasoning that bridges can only signal wakeup on behalf of their subordinate devices. However, there are bridges that can signal wakeup itself. For example PCIe downstream and root ports supporting hotplug may signal wakeup upon hotplug event. For this reason change pci_enable_wake() so that it skips all bridges except those that we power manage (->bridge_d3 is set). Those are the ones that can go into low power states and may need to signal wakeup. Signed-off-by: Mika Westerberg Reviewed-by: Rafael J. Wysocki --- Resending this because for some reason it did not hit the mailing lists. Added tag from Rafael as well. drivers/pci/pci.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 29ff9619b5fa..1af6f1887986 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -2133,10 +2133,13 @@ static int __pci_enable_wake(struct pci_dev *dev, pci_power_t state, bool enable int ret = 0; /* - * Bridges can only signal wakeup on behalf of subordinate devices, - * but that is set up elsewhere, so skip them. + * Bridges that are not power-manageable directly only signal + * wakeup on behalf of subordinate devices which is set up + * elsewhere, so skip them. However, bridges that are + * power-manageable may signal wakeup for themselves (for example, + * on a hotplug event) and they need to be covered here. */ - if (pci_has_subordinate(dev)) + if (!pci_power_manageable(dev)) return 0; /* Don't do the same thing twice in a row for one device. */ -- 2.18.0