All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v3 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623
@ 2018-09-21  3:28 ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

In order to support HDMI on mt2701,
we have to make some modifications.
1) Add the HDMI driver.
2) Add the DPI driver.
3) Add a mechanism that config output component by dts.

Changes since v2:
 - Fix the typo in commit message.
 - Remove const of reg_h_fre_con in the mtk_dpi_conf struct
 - Remove unused error log
 - Use lower casee for hex number
 - Use common API which defined in mtk_hdmi_phy.c to reduce code size
 - Implemet the enable/disable of phy_pll_ops the same as 8173
 - Move the common header to mtk_hdmi_phy.h
 - Remove the including of debugfs.h
NOTE:
 - add description about thecoponent output in the binding document in v4.

Changes since v1:
 - Separate some patches to independent patch.
 - add DISP_REG_CONFIG_DSI_SEL and DISP_REG_CONFIG_DPI_SEL
   configuration in the condition of BLS&DPI0 connection.

Changes since v0:
 - Correct some typos in commit message.
 - Fixup the build warning (tmp variable didn't be initialized)

Bibby Hsieh (3):
  drm/mediatek: implement connection from BLS to DPI0
  drm/mediatek: add a error return value when clock driver has been
    prepared
  drm/mediatek: config component output by device node port

chunhui dai (9):
  drm/mediatek: add refcount for DPI power on/off
  drm/mediatek: move hardware register to node data
  drm/mediatek: adjust EDGE to match clock and data
  drm/mediatek: add clock factor for different IC
  drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
  drm/mediatek: add dpi driver for mt2701 and mt7623
  drm/mediatek: separate hdmi phy to different file
  drm/mediatek: add support for SPDIF audio in HDMI
  drm/mediatek: add hdmi driver for MT2701 and MT7623

 drivers/gpu/drm/mediatek/Makefile              |   5 +-
 drivers/gpu/drm/mediatek/mtk_dpi.c             | 106 ++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h        |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c         |  14 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c    |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_drv.c         |  39 ++++-
 drivers/gpu/drm/mediatek/mtk_drm_drv.h         |   4 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |  15 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.h            |   2 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 213 ++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  56 ++++++
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +--------------------
 13 files changed, 661 insertions(+), 235 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c

-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623
@ 2018-09-21  3:28 ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: linux-kernel, Cawa Cheng, Mao Huang, Thierry Reding,
	Yingjoe Chen, Sascha Hauer, linux-arm-kernel

In order to support HDMI on mt2701,
we have to make some modifications.
1) Add the HDMI driver.
2) Add the DPI driver.
3) Add a mechanism that config output component by dts.

Changes since v2:
 - Fix the typo in commit message.
 - Remove const of reg_h_fre_con in the mtk_dpi_conf struct
 - Remove unused error log
 - Use lower casee for hex number
 - Use common API which defined in mtk_hdmi_phy.c to reduce code size
 - Implemet the enable/disable of phy_pll_ops the same as 8173
 - Move the common header to mtk_hdmi_phy.h
 - Remove the including of debugfs.h
NOTE:
 - add description about thecoponent output in the binding document in v4.

Changes since v1:
 - Separate some patches to independent patch.
 - add DISP_REG_CONFIG_DSI_SEL and DISP_REG_CONFIG_DPI_SEL
   configuration in the condition of BLS&DPI0 connection.

Changes since v0:
 - Correct some typos in commit message.
 - Fixup the build warning (tmp variable didn't be initialized)

Bibby Hsieh (3):
  drm/mediatek: implement connection from BLS to DPI0
  drm/mediatek: add a error return value when clock driver has been
    prepared
  drm/mediatek: config component output by device node port

chunhui dai (9):
  drm/mediatek: add refcount for DPI power on/off
  drm/mediatek: move hardware register to node data
  drm/mediatek: adjust EDGE to match clock and data
  drm/mediatek: add clock factor for different IC
  drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
  drm/mediatek: add dpi driver for mt2701 and mt7623
  drm/mediatek: separate hdmi phy to different file
  drm/mediatek: add support for SPDIF audio in HDMI
  drm/mediatek: add hdmi driver for MT2701 and MT7623

 drivers/gpu/drm/mediatek/Makefile              |   5 +-
 drivers/gpu/drm/mediatek/mtk_dpi.c             | 106 ++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h        |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c         |  14 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c    |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_drv.c         |  39 ++++-
 drivers/gpu/drm/mediatek/mtk_drm_drv.h         |   4 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |  15 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.h            |   2 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 213 ++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  56 ++++++
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +--------------------
 13 files changed, 661 insertions(+), 235 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c

-- 
2.12.5.2.gbdf23ab

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623
@ 2018-09-21  3:28 ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

In order to support HDMI on mt2701,
we have to make some modifications.
1) Add the HDMI driver.
2) Add the DPI driver.
3) Add a mechanism that config output component by dts.

Changes since v2:
 - Fix the typo in commit message.
 - Remove const of reg_h_fre_con in the mtk_dpi_conf struct
 - Remove unused error log
 - Use lower casee for hex number
 - Use common API which defined in mtk_hdmi_phy.c to reduce code size
 - Implemet the enable/disable of phy_pll_ops the same as 8173
 - Move the common header to mtk_hdmi_phy.h
 - Remove the including of debugfs.h
NOTE:
 - add description about thecoponent output in the binding document in v4.

Changes since v1:
 - Separate some patches to independent patch.
 - add DISP_REG_CONFIG_DSI_SEL and DISP_REG_CONFIG_DPI_SEL
   configuration in the condition of BLS&DPI0 connection.

Changes since v0:
 - Correct some typos in commit message.
 - Fixup the build warning (tmp variable didn't be initialized)

Bibby Hsieh (3):
  drm/mediatek: implement connection from BLS to DPI0
  drm/mediatek: add a error return value when clock driver has been
    prepared
  drm/mediatek: config component output by device node port

chunhui dai (9):
  drm/mediatek: add refcount for DPI power on/off
  drm/mediatek: move hardware register to node data
  drm/mediatek: adjust EDGE to match clock and data
  drm/mediatek: add clock factor for different IC
  drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
  drm/mediatek: add dpi driver for mt2701 and mt7623
  drm/mediatek: separate hdmi phy to different file
  drm/mediatek: add support for SPDIF audio in HDMI
  drm/mediatek: add hdmi driver for MT2701 and MT7623

 drivers/gpu/drm/mediatek/Makefile              |   5 +-
 drivers/gpu/drm/mediatek/mtk_dpi.c             | 106 ++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h        |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c         |  14 +-
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c    |   2 +-
 drivers/gpu/drm/mediatek/mtk_drm_drv.c         |  39 ++++-
 drivers/gpu/drm/mediatek/mtk_drm_drv.h         |   4 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |  15 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.h            |   2 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 213 ++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  56 ++++++
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +--------------------
 13 files changed, 661 insertions(+), 235 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c

-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 6c0ea39d5739..d9373e67d328 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -77,6 +77,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
+	int refcount;
 	u8 power_ctl;
 };
 
@@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 
 static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
+	if (WARN_ON(dpi->refcount == 0))
+		return;
+
+	if (--dpi->refcount != 0)
+		return;
+
 	dpi->power_ctl &= ~pctl;
 
 	if ((dpi->power_ctl & DPI_POWER_START) ||
@@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
 	int ret;
 
+	if (++dpi->refcount != 1)
+		return 0;
+
 	dpi->power_ctl |= pctl;
 
 	if (!(dpi->power_ctl & DPI_POWER_START) &&
 	    !(dpi->power_ctl & DPI_POWER_ENABLE))
-		return 0;
+		goto err_refcount;
 
 	if (dpi->power_sta)
-		return 0;
+		goto err_refcount;
 
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
@@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	clk_disable_unprepare(dpi->engine_clk);
 err_eng:
 	dpi->power_ctl &= ~pctl;
+err_refcount:
+	dpi->refcount--;
 	return ret;
 }
 
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 6c0ea39d5739..d9373e67d328 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -77,6 +77,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
+	int refcount;
 	u8 power_ctl;
 };
 
@@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 
 static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
+	if (WARN_ON(dpi->refcount == 0))
+		return;
+
+	if (--dpi->refcount != 0)
+		return;
+
 	dpi->power_ctl &= ~pctl;
 
 	if ((dpi->power_ctl & DPI_POWER_START) ||
@@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
 	int ret;
 
+	if (++dpi->refcount != 1)
+		return 0;
+
 	dpi->power_ctl |= pctl;
 
 	if (!(dpi->power_ctl & DPI_POWER_START) &&
 	    !(dpi->power_ctl & DPI_POWER_ENABLE))
-		return 0;
+		goto err_refcount;
 
 	if (dpi->power_sta)
-		return 0;
+		goto err_refcount;
 
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
@@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	clk_disable_unprepare(dpi->engine_clk);
 err_eng:
 	dpi->power_ctl &= ~pctl;
+err_refcount:
+	dpi->refcount--;
 	return ret;
 }
 
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 6c0ea39d5739..d9373e67d328 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -77,6 +77,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
+	int refcount;
 	u8 power_ctl;
 };
 
@@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 
 static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
+	if (WARN_ON(dpi->refcount == 0))
+		return;
+
+	if (--dpi->refcount != 0)
+		return;
+
 	dpi->power_ctl &= ~pctl;
 
 	if ((dpi->power_ctl & DPI_POWER_START) ||
@@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
 	int ret;
 
+	if (++dpi->refcount != 1)
+		return 0;
+
 	dpi->power_ctl |= pctl;
 
 	if (!(dpi->power_ctl & DPI_POWER_START) &&
 	    !(dpi->power_ctl & DPI_POWER_ENABLE))
-		return 0;
+		goto err_refcount;
 
 	if (dpi->power_sta)
-		return 0;
+		goto err_refcount;
 
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
@@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	clk_disable_unprepare(dpi->engine_clk);
 err_eng:
 	dpi->power_ctl &= ~pctl;
+err_refcount:
+	dpi->refcount--;
 	return ret;
 }
 
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 02/12] drm/mediatek: move hardware register to node data
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index d9373e67d328..74a32833bde1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -18,6 +18,7 @@
 #include <linux/component.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/interrupt.h>
 #include <linux/types.h>
@@ -72,6 +73,7 @@ struct mtk_dpi {
 	struct clk *tvd_clk;
 	int irq;
 	struct drm_display_mode mode;
+	const struct mtk_dpi_conf *conf;
 	enum mtk_dpi_out_color_format color_format;
 	enum mtk_dpi_out_yc_map yc_map;
 	enum mtk_dpi_out_bit_num bit_num;
@@ -117,6 +119,10 @@ struct mtk_dpi_yc_limit {
 	u16 c_bottom;
 };
 
+struct mtk_dpi_conf {
+	u32 reg_h_fre_con;
+};
+
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
 {
 	u32 tmp = readl(dpi->regs + offset) & ~mask;
@@ -342,7 +348,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
 
 static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 {
-	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
+	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
@@ -668,6 +674,10 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static const struct mtk_dpi_conf mt8173_conf = {
+	.reg_h_fre_con = 0xe0,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -682,6 +692,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dpi->dev = dev;
+	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
@@ -761,8 +772,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
-	{ .compatible = "mediatek,mt8173-dpi", },
-	{}
+	{ .compatible = "mediatek,mt8173-dpi",
+	  .data = &mt8173_conf,
+	},
+	{ },
 };
 
 struct platform_driver mtk_dpi_driver = {
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 4b6ad4751a31..040444d7718d 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,6 +223,5 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
-#define DPI_H_FRE_CON		0xE0
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 02/12] drm/mediatek: move hardware register to node data
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index d9373e67d328..74a32833bde1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -18,6 +18,7 @@
 #include <linux/component.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/interrupt.h>
 #include <linux/types.h>
@@ -72,6 +73,7 @@ struct mtk_dpi {
 	struct clk *tvd_clk;
 	int irq;
 	struct drm_display_mode mode;
+	const struct mtk_dpi_conf *conf;
 	enum mtk_dpi_out_color_format color_format;
 	enum mtk_dpi_out_yc_map yc_map;
 	enum mtk_dpi_out_bit_num bit_num;
@@ -117,6 +119,10 @@ struct mtk_dpi_yc_limit {
 	u16 c_bottom;
 };
 
+struct mtk_dpi_conf {
+	u32 reg_h_fre_con;
+};
+
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
 {
 	u32 tmp = readl(dpi->regs + offset) & ~mask;
@@ -342,7 +348,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
 
 static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 {
-	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
+	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
@@ -668,6 +674,10 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static const struct mtk_dpi_conf mt8173_conf = {
+	.reg_h_fre_con = 0xe0,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -682,6 +692,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dpi->dev = dev;
+	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
@@ -761,8 +772,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
-	{ .compatible = "mediatek,mt8173-dpi", },
-	{}
+	{ .compatible = "mediatek,mt8173-dpi",
+	  .data = &mt8173_conf,
+	},
+	{ },
 };
 
 struct platform_driver mtk_dpi_driver = {
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 4b6ad4751a31..040444d7718d 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,6 +223,5 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
-#define DPI_H_FRE_CON		0xE0
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 02/12] drm/mediatek: move hardware register to node data
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

The address of register DPI_H_FRE_CON is different in different IC.
Using of_node data to find this address.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
 2 files changed, 16 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index d9373e67d328..74a32833bde1 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -18,6 +18,7 @@
 #include <linux/component.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_graph.h>
 #include <linux/interrupt.h>
 #include <linux/types.h>
@@ -72,6 +73,7 @@ struct mtk_dpi {
 	struct clk *tvd_clk;
 	int irq;
 	struct drm_display_mode mode;
+	const struct mtk_dpi_conf *conf;
 	enum mtk_dpi_out_color_format color_format;
 	enum mtk_dpi_out_yc_map yc_map;
 	enum mtk_dpi_out_bit_num bit_num;
@@ -117,6 +119,10 @@ struct mtk_dpi_yc_limit {
 	u16 c_bottom;
 };
 
+struct mtk_dpi_conf {
+	u32 reg_h_fre_con;
+};
+
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
 {
 	u32 tmp = readl(dpi->regs + offset) & ~mask;
@@ -342,7 +348,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
 
 static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 {
-	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
+	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
@@ -668,6 +674,10 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static const struct mtk_dpi_conf mt8173_conf = {
+	.reg_h_fre_con = 0xe0,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -682,6 +692,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	dpi->dev = dev;
+	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dpi->regs = devm_ioremap_resource(dev, mem);
@@ -761,8 +772,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
-	{ .compatible = "mediatek,mt8173-dpi", },
-	{}
+	{ .compatible = "mediatek,mt8173-dpi",
+	  .data = &mt8173_conf,
+	},
+	{ },
 };
 
 struct platform_driver mtk_dpi_driver = {
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 4b6ad4751a31..040444d7718d 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,6 +223,5 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
-#define DPI_H_FRE_CON		0xE0
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 03/12] drm/mediatek: adjust EDGE to match clock and data
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

The default timing of DPI data and clock is not match.
We could adjust this bit to make them match.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 74a32833bde1..1e7369e0d91c 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -121,6 +121,7 @@ struct mtk_dpi_yc_limit {
 
 struct mtk_dpi_conf {
 	u32 reg_h_fre_con;
+	bool edge_sel_en;
 };
 
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -351,6 +352,12 @@ static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
+static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
+{
+	if (dpi->conf->edge_sel_en)
+		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
+}
+
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 					enum mtk_dpi_out_color_format format)
 {
@@ -536,6 +543,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
 	mtk_dpi_config_2n_h_fre(dpi);
+	mtk_dpi_config_disable_edge(dpi);
 	mtk_dpi_sw_reset(dpi, false);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 040444d7718d..d9db8c4cacd7 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,5 +223,6 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
+#define EDGE_SEL_EN			BIT(5)
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 03/12] drm/mediatek: adjust EDGE to match clock and data
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: chunhui dai, linux-kernel, Cawa Cheng, Mao Huang, Thierry Reding,
	Yingjoe Chen, Sascha Hauer, linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

The default timing of DPI data and clock is not match.
We could adjust this bit to make them match.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 74a32833bde1..1e7369e0d91c 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -121,6 +121,7 @@ struct mtk_dpi_yc_limit {
 
 struct mtk_dpi_conf {
 	u32 reg_h_fre_con;
+	bool edge_sel_en;
 };
 
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -351,6 +352,12 @@ static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
+static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
+{
+	if (dpi->conf->edge_sel_en)
+		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
+}
+
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 					enum mtk_dpi_out_color_format format)
 {
@@ -536,6 +543,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
 	mtk_dpi_config_2n_h_fre(dpi);
+	mtk_dpi_config_disable_edge(dpi);
 	mtk_dpi_sw_reset(dpi, false);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 040444d7718d..d9db8c4cacd7 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,5 +223,6 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
+#define EDGE_SEL_EN			BIT(5)
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 03/12] drm/mediatek: adjust EDGE to match clock and data
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

The default timing of DPI data and clock is not match.
We could adjust this bit to make them match.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c      | 8 ++++++++
 drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 1 +
 2 files changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 74a32833bde1..1e7369e0d91c 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -121,6 +121,7 @@ struct mtk_dpi_yc_limit {
 
 struct mtk_dpi_conf {
 	u32 reg_h_fre_con;
+	bool edge_sel_en;
 };
 
 static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -351,6 +352,12 @@ static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
 	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
 }
 
+static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
+{
+	if (dpi->conf->edge_sel_en)
+		mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
+}
+
 static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 					enum mtk_dpi_out_color_format format)
 {
@@ -536,6 +543,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
 	mtk_dpi_config_2n_h_fre(dpi);
+	mtk_dpi_config_disable_edge(dpi);
 	mtk_dpi_sw_reset(dpi, false);
 
 	return 0;
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
index 040444d7718d..d9db8c4cacd7 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
+++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
@@ -223,5 +223,6 @@
 #define ESAV_CODE2			(0xFFF << 0)
 #define ESAV_CODE3_MSB			BIT(16)
 
+#define EDGE_SEL_EN			BIT(5)
 #define H_FRE_2N			BIT(25)
 #endif /* __MTK_DPI_REGS_H */
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 04/12] drm/mediatek: add clock factor for different IC
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

different IC has different clock designed in HDMI, the factor for
calculate clock should be different. Usinng the data in of_node
to find this factor.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 1e7369e0d91c..022ccec49cea 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
 };
 
 struct mtk_dpi_conf {
+	unsigned int (*cal_factor)(int clock);
 	u32 reg_h_fre_con;
 	bool edge_sel_en;
 };
@@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	unsigned int factor;
 
 	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
-
-	if (mode->clock <= 27000)
-		factor = 3 << 4;
-	else if (mode->clock <= 84000)
-		factor = 3 << 3;
-	else if (mode->clock <= 167000)
-		factor = 3 << 2;
-	else
-		factor = 3 << 1;
+	factor = dpi->conf->cal_factor(mode->clock);
 	drm_display_mode_to_videomode(mode, &vm);
 	pll_rate = vm.pixelclock * factor;
 
@@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static unsigned int mt8173_calculate_factor(int clock)
+{
+	if (clock <= 27000)
+		return 3 << 4;
+	else if (clock <= 84000)
+		return 3 << 3;
+	else if (clock <= 167000)
+		return 3 << 2;
+	else
+		return 3 << 1;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
+	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 04/12] drm/mediatek: add clock factor for different IC
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

different IC has different clock designed in HDMI, the factor for
calculate clock should be different. Usinng the data in of_node
to find this factor.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 1e7369e0d91c..022ccec49cea 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
 };
 
 struct mtk_dpi_conf {
+	unsigned int (*cal_factor)(int clock);
 	u32 reg_h_fre_con;
 	bool edge_sel_en;
 };
@@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	unsigned int factor;
 
 	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
-
-	if (mode->clock <= 27000)
-		factor = 3 << 4;
-	else if (mode->clock <= 84000)
-		factor = 3 << 3;
-	else if (mode->clock <= 167000)
-		factor = 3 << 2;
-	else
-		factor = 3 << 1;
+	factor = dpi->conf->cal_factor(mode->clock);
 	drm_display_mode_to_videomode(mode, &vm);
 	pll_rate = vm.pixelclock * factor;
 
@@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static unsigned int mt8173_calculate_factor(int clock)
+{
+	if (clock <= 27000)
+		return 3 << 4;
+	else if (clock <= 84000)
+		return 3 << 3;
+	else if (clock <= 167000)
+		return 3 << 2;
+	else
+		return 3 << 1;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
+	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 04/12] drm/mediatek: add clock factor for different IC
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

different IC has different clock designed in HDMI, the factor for
calculate clock should be different. Usinng the data in of_node
to find this factor.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
 1 file changed, 15 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 1e7369e0d91c..022ccec49cea 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
 };
 
 struct mtk_dpi_conf {
+	unsigned int (*cal_factor)(int clock);
 	u32 reg_h_fre_con;
 	bool edge_sel_en;
 };
@@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	unsigned int factor;
 
 	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
-
-	if (mode->clock <= 27000)
-		factor = 3 << 4;
-	else if (mode->clock <= 84000)
-		factor = 3 << 3;
-	else if (mode->clock <= 167000)
-		factor = 3 << 2;
-	else
-		factor = 3 << 1;
+	factor = dpi->conf->cal_factor(mode->clock);
 	drm_display_mode_to_videomode(mode, &vm);
 	pll_rate = vm.pixelclock * factor;
 
@@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
 	.unbind = mtk_dpi_unbind,
 };
 
+static unsigned int mt8173_calculate_factor(int clock)
+{
+	if (clock <= 27000)
+		return 3 << 4;
+	else if (clock <= 84000)
+		return 3 << 3;
+	else if (clock <= 167000)
+		return 3 << 2;
+	else
+		return 3 << 1;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
+	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

Convert dpi driver to use drm_of_find_panel_or_bridge.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
related links:
[1] https://lkml.org/lkml/2017/2/3/716
[2] https://lkml.org/lkml/2017/2/3/719

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 022ccec49cea..7a4868a0afec 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -14,6 +14,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
 #include <linux/kernel.h>
 #include <linux/component.h>
 #include <linux/platform_device.h>
@@ -697,7 +698,6 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_dpi *dpi;
 	struct resource *mem;
-	struct device_node *bridge_node;
 	int comp_id;
 	int ret;
 
@@ -743,16 +743,14 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
-	if (!bridge_node)
-		return -ENODEV;
-
-	dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
-
-	dpi->bridge = of_drm_find_bridge(bridge_node);
-	of_node_put(bridge_node);
-	if (!dpi->bridge)
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  NULL, &dpi->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to find panel or bridge: %d\n", ret);
 		return -EPROBE_DEFER;
+	}
+
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: chunhui dai, linux-kernel, Cawa Cheng, Mao Huang, Thierry Reding,
	Yingjoe Chen, Sascha Hauer, linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

Convert dpi driver to use drm_of_find_panel_or_bridge.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
related links:
[1] https://lkml.org/lkml/2017/2/3/716
[2] https://lkml.org/lkml/2017/2/3/719

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 022ccec49cea..7a4868a0afec 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -14,6 +14,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
 #include <linux/kernel.h>
 #include <linux/component.h>
 #include <linux/platform_device.h>
@@ -697,7 +698,6 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_dpi *dpi;
 	struct resource *mem;
-	struct device_node *bridge_node;
 	int comp_id;
 	int ret;
 
@@ -743,16 +743,14 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
-	if (!bridge_node)
-		return -ENODEV;
-
-	dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
-
-	dpi->bridge = of_drm_find_bridge(bridge_node);
-	of_node_put(bridge_node);
-	if (!dpi->bridge)
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  NULL, &dpi->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to find panel or bridge: %d\n", ret);
 		return -EPROBE_DEFER;
+	}
+
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.12.5.2.gbdf23ab

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

Convert dpi driver to use drm_of_find_panel_or_bridge.
This changes some error messages to debug messages (in the graph core).
Graph connections are often "no connects" depending on the particular
board, so we want to avoid spurious messages. Plus the kernel is not a
DT validator.
related links:
[1] https://lkml.org/lkml/2017/2/3/716
[2] https://lkml.org/lkml/2017/2/3/719

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 022ccec49cea..7a4868a0afec 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -14,6 +14,7 @@
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
 #include <drm/drm_crtc_helper.h>
+#include <drm/drm_of.h>
 #include <linux/kernel.h>
 #include <linux/component.h>
 #include <linux/platform_device.h>
@@ -697,7 +698,6 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_dpi *dpi;
 	struct resource *mem;
-	struct device_node *bridge_node;
 	int comp_id;
 	int ret;
 
@@ -743,16 +743,14 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
-	if (!bridge_node)
-		return -ENODEV;
-
-	dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
-
-	dpi->bridge = of_drm_find_bridge(bridge_node);
-	of_node_put(bridge_node);
-	if (!dpi->bridge)
+	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
+					  NULL, &dpi->bridge);
+	if (ret) {
+		dev_err(dev, "Failed to find panel or bridge: %d\n", ret);
 		return -EPROBE_DEFER;
+	}
+
+	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
 
 	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
 	if (comp_id < 0) {
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds dpi dirver suppot for both mt2701 and mt7623.
And also support other (existing or future) chips that use
the same binding and driver.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
 2 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7a4868a0afec..a9d8231a0a9e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -688,11 +688,29 @@ static unsigned int mt8173_calculate_factor(int clock)
 		return 3 << 1;
 }
 
+static unsigned int mt2701_calculate_factor(int clock)
+{
+	if (clock <= 64000)
+		return 16;
+	else if (clock <= 128000)
+		return 8;
+	else if (clock <= 256000)
+		return 4;
+	else
+		return 2;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
 	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
+static const struct mtk_dpi_conf mt2701_conf = {
+	.cal_factor = mt2701_calculate_factor,
+	.reg_h_fre_con = 0xb0,
+	.edge_sel_en = true,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -784,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = &mt2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = &mt8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 39721119713b..d961112fa2f5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DSI },
 	{ .compatible = "mediatek,mt8173-dsi",
 	  .data = (void *)MTK_DSI },
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt2701-disp-mutex",
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: chunhui dai, linux-kernel, Cawa Cheng, Mao Huang, Thierry Reding,
	Yingjoe Chen, Sascha Hauer, linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds dpi dirver suppot for both mt2701 and mt7623.
And also support other (existing or future) chips that use
the same binding and driver.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
 2 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7a4868a0afec..a9d8231a0a9e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -688,11 +688,29 @@ static unsigned int mt8173_calculate_factor(int clock)
 		return 3 << 1;
 }
 
+static unsigned int mt2701_calculate_factor(int clock)
+{
+	if (clock <= 64000)
+		return 16;
+	else if (clock <= 128000)
+		return 8;
+	else if (clock <= 256000)
+		return 4;
+	else
+		return 2;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
 	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
+static const struct mtk_dpi_conf mt2701_conf = {
+	.cal_factor = mt2701_calculate_factor,
+	.reg_h_fre_con = 0xb0,
+	.edge_sel_en = true,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -784,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = &mt2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = &mt8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 39721119713b..d961112fa2f5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DSI },
 	{ .compatible = "mediatek,mt8173-dsi",
 	  .data = (void *)MTK_DSI },
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt2701-disp-mutex",
-- 
2.12.5.2.gbdf23ab

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds dpi dirver suppot for both mt2701 and mt7623.
And also support other (existing or future) chips that use
the same binding and driver.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
 2 files changed, 23 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 7a4868a0afec..a9d8231a0a9e 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -688,11 +688,29 @@ static unsigned int mt8173_calculate_factor(int clock)
 		return 3 << 1;
 }
 
+static unsigned int mt2701_calculate_factor(int clock)
+{
+	if (clock <= 64000)
+		return 16;
+	else if (clock <= 128000)
+		return 8;
+	else if (clock <= 256000)
+		return 4;
+	else
+		return 2;
+}
+
 static const struct mtk_dpi_conf mt8173_conf = {
 	.cal_factor = mt8173_calculate_factor,
 	.reg_h_fre_con = 0xe0,
 };
 
+static const struct mtk_dpi_conf mt2701_conf = {
+	.cal_factor = mt2701_calculate_factor,
+	.reg_h_fre_con = 0xb0,
+	.edge_sel_en = true,
+};
+
 static int mtk_dpi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -784,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_dpi_of_ids[] = {
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = &mt2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = &mt8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index 39721119713b..d961112fa2f5 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
 	  .data = (void *)MTK_DSI },
 	{ .compatible = "mediatek,mt8173-dsi",
 	  .data = (void *)MTK_DSI },
+	{ .compatible = "mediatek,mt2701-dpi",
+	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt8173-dpi",
 	  .data = (void *)MTK_DPI },
 	{ .compatible = "mediatek,mt2701-disp-mutex",
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 07/12] drm/mediatek: separate hdmi phy to different file
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

Different IC has different phy setting of HDMI.
This patch separates the phy hardware relate part for mt8173.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile              |   6 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   1 +
 drivers/gpu/drm/mediatek/mtk_hdmi.h            |   2 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 210 +++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  54 +++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +-----------------------
 6 files changed, 276 insertions(+), 201 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index ce83c396a742..61cf0d2ab28a 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+
 mediatek-drm-y := mtk_disp_color.o \
 		  mtk_disp_ovl.o \
 		  mtk_disp_rdma.o \
@@ -18,6 +19,7 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 mediatek-drm-hdmi-objs := mtk_cec.o \
 			  mtk_hdmi.o \
 			  mtk_hdmi_ddc.o \
-			  mtk_mt8173_hdmi_phy.o
+			  mtk_mt8173_hdmi_phy.o \
+			  mtk_hdmi_phy.o
 
-obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
+obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 2d45d1dd9554..2ca9f6a64dab 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -233,6 +233,7 @@ static void mtk_hdmi_hw_vid_black(struct mtk_hdmi *hdmi, bool black)
 static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
 {
 	struct arm_smccc_res res;
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(hdmi->phy);
 
 	/*
 	 * MT8173 HDMI hardware has an output control bit to enable/disable HDMI
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.h b/drivers/gpu/drm/mediatek/mtk_hdmi.h
index 6371b3de1ff6..3e9fb8d19802 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.h
@@ -13,11 +13,11 @@
  */
 #ifndef _MTK_HDMI_CTRL_H
 #define _MTK_HDMI_CTRL_H
+#include "mtk_hdmi_phy.h"
 
 struct platform_driver;
 
 extern struct platform_driver mtk_cec_driver;
 extern struct platform_driver mtk_hdmi_ddc_driver;
-extern struct platform_driver mtk_hdmi_phy_driver;
 
 #endif /* _MTK_HDMI_CTRL_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
new file mode 100644
index 000000000000..d2dc50db1feb
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jie Qiu <jie.qiu@mediatek.com>
+ */
+
+#include "mtk_hdmi_phy.h"
+
+static int mtk_hdmi_phy_power_on(struct phy *phy);
+static int mtk_hdmi_phy_power_off(struct phy *phy);
+
+static const struct phy_ops mtk_hdmi_phy_dev_ops = {
+	.power_on = mtk_hdmi_phy_power_on,
+	.power_off = mtk_hdmi_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			     u32 bits)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp &= ~bits;
+	writel(tmp, reg);
+}
+
+void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			   u32 bits)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp |= bits;
+	writel(tmp, reg);
+}
+
+void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+		       u32 val, u32 mask)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp = (tmp & ~mask) | (val & mask);
+	writel(tmp, reg);
+}
+
+inline struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct mtk_hdmi_phy, pll_hw);
+}
+
+static int mtk_hdmi_phy_power_on(struct phy *phy)
+{
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(hdmi_phy->pll);
+	if (ret < 0)
+		return ret;
+
+	hdmi_phy->conf->hdmi_phy_enable_tmds(hdmi_phy);
+	return 0;
+}
+
+static int mtk_hdmi_phy_power_off(struct phy *phy)
+{
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+
+	hdmi_phy->conf->hdmi_phy_disable_tmds(hdmi_phy);
+	clk_disable_unprepare(hdmi_phy->pll);
+
+	return 0;
+}
+
+static const struct phy_ops *
+mtk_hdmi_phy_dev_get_ops(const struct mtk_hdmi_phy *hdmi_phy)
+{
+	if (hdmi_phy && hdmi_phy->conf &&
+	    hdmi_phy->conf->hdmi_phy_enable_tmds &&
+	    hdmi_phy->conf->hdmi_phy_disable_tmds)
+		return &mtk_hdmi_phy_dev_ops;
+
+	dev_err(hdmi_phy->dev, "Failed to get dev ops of phy\n");
+		return NULL;
+}
+
+static void mtk_hdmi_phy_clk_get_ops(struct mtk_hdmi_phy *hdmi_phy,
+				     const struct clk_ops **ops)
+{
+	if (hdmi_phy && hdmi_phy->conf && hdmi_phy->conf->hdmi_phy_clk_ops)
+		*ops = hdmi_phy->conf->hdmi_phy_clk_ops;
+	else
+		dev_err(hdmi_phy->dev, "Failed to get clk ops of phy\n");
+}
+
+static int mtk_hdmi_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_hdmi_phy *hdmi_phy;
+	struct resource *mem;
+	struct clk *ref_clk;
+	const char *ref_clk_name;
+	struct clk_init_data clk_init = {
+		.num_parents = 1,
+		.parent_names = (const char * const *)&ref_clk_name,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
+	};
+
+	struct phy *phy;
+	struct phy_provider *phy_provider;
+	int ret;
+
+	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
+	if (!hdmi_phy)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi_phy->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hdmi_phy->regs)) {
+		ret = PTR_ERR(hdmi_phy->regs);
+		dev_err(dev, "Failed to get memory resource: %d\n", ret);
+		return ret;
+	}
+
+	ref_clk = devm_clk_get(dev, "pll_ref");
+	if (IS_ERR(ref_clk)) {
+		ret = PTR_ERR(ref_clk);
+		dev_err(&pdev->dev, "Failed to get PLL reference clock: %d\n",
+			ret);
+		return ret;
+	}
+	ref_clk_name = __clk_get_name(ref_clk);
+
+	ret = of_property_read_string(dev->of_node, "clock-output-names",
+				      &clk_init.name);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
+		return ret;
+	}
+
+	hdmi_phy->dev = dev;
+	hdmi_phy->conf =
+		(struct mtk_hdmi_phy_conf *)of_device_get_match_data(dev);
+	mtk_hdmi_phy_clk_get_ops(hdmi_phy, &clk_init.ops);
+	hdmi_phy->pll_hw.init = &clk_init;
+	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
+	if (IS_ERR(hdmi_phy->pll)) {
+		ret = PTR_ERR(hdmi_phy->pll);
+		dev_err(dev, "Failed to register PLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "mediatek,ibias",
+				   &hdmi_phy->ibias);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get ibias: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "mediatek,ibias_up",
+				   &hdmi_phy->ibias_up);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get ibias up: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "Using default TX DRV impedance: 4.2k/36\n");
+	hdmi_phy->drv_imp_clk = 0x30;
+	hdmi_phy->drv_imp_d2 = 0x30;
+	hdmi_phy->drv_imp_d1 = 0x30;
+	hdmi_phy->drv_imp_d0 = 0x30;
+
+	phy = devm_phy_create(dev, NULL, mtk_hdmi_phy_dev_get_ops(hdmi_phy));
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create HDMI PHY\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, hdmi_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register HDMI PHY\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
+				   hdmi_phy->pll);
+}
+
+static const struct of_device_id mtk_hdmi_phy_match[] = {
+	{ .compatible = "mediatek,mt8173-hdmi-phy",
+	  .data = &mtk_hdmi_phy_8173_conf,
+	},
+	{},
+};
+
+struct platform_driver mtk_hdmi_phy_driver = {
+	.probe = mtk_hdmi_phy_probe,
+	.driver = {
+		.name = "mediatek-hdmi-phy",
+		.of_match_table = mtk_hdmi_phy_match,
+	},
+};
+
+MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
new file mode 100644
index 000000000000..e346fe319621
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chunhui Dai <chunhui.dai@mediatek.com>
+ */
+
+#ifndef _MTK_HDMI_PHY_H
+#define _MTK_HDMI_PHY_H
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+struct mtk_hdmi_phy;
+
+struct mtk_hdmi_phy_conf {
+	const struct clk_ops *hdmi_phy_clk_ops;
+	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
+	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
+};
+
+struct mtk_hdmi_phy {
+	void __iomem *regs;
+	struct device *dev;
+	struct mtk_hdmi_phy_conf *conf;
+	struct clk *pll;
+	struct clk_hw pll_hw;
+	unsigned long pll_rate;
+	unsigned char drv_imp_clk;
+	unsigned char drv_imp_d2;
+	unsigned char drv_imp_d1;
+	unsigned char drv_imp_d0;
+	unsigned int ibias;
+	unsigned int ibias_up;
+};
+
+void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			     u32 bits);
+void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			   u32 bits);
+void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+		       u32 val, u32 mask);
+struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
+
+extern struct platform_driver mtk_hdmi_phy_driver;
+extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
+
+#endif /* _MTK_HDMI_PHY_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index 51cb9cfb6646..5dea03334042 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -12,15 +12,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
+#include "mtk_hdmi_phy.h"
 
 #define HDMI_CON0		0x00
 #define RG_HDMITX_PLL_EN		BIT(31)
@@ -123,20 +115,6 @@
 #define RGS_HDMITX_5T1_EDG		(0xf << 4)
 #define RGS_HDMITX_PLUG_TST		BIT(0)
 
-struct mtk_hdmi_phy {
-	void __iomem *regs;
-	struct device *dev;
-	struct clk *pll;
-	struct clk_hw pll_hw;
-	unsigned long pll_rate;
-	u8 drv_imp_clk;
-	u8 drv_imp_d2;
-	u8 drv_imp_d1;
-	u8 drv_imp_d0;
-	u32 ibias;
-	u32 ibias_up;
-};
-
 static const u8 PREDIV[3][4] = {
 	{0x0, 0x0, 0x0, 0x0},	/* 27Mhz */
 	{0x1, 0x1, 0x1, 0x1},	/* 74Mhz */
@@ -185,44 +163,6 @@ static const u8 HTPLLBR[3][4] = {
 	{0x1, 0x2, 0x2, 0x1}	/* 148Mhz */
 };
 
-static void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-				    u32 bits)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp &= ~bits;
-	writel(tmp, reg);
-}
-
-static void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-				  u32 bits)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp |= bits;
-	writel(tmp, reg);
-}
-
-static void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-			      u32 val, u32 mask)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp = (tmp & ~mask) | (val & mask);
-	writel(tmp, reg);
-}
-
-static inline struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw)
-{
-	return container_of(hw, struct mtk_hdmi_phy, pll_hw);
-}
-
 static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
@@ -367,7 +307,7 @@ static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
 	return hdmi_phy->pll_rate;
 }
 
-static const struct clk_ops mtk_hdmi_pll_ops = {
+static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
 	.set_rate = mtk_hdmi_pll_set_rate,
@@ -390,142 +330,10 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 				RG_HDMITX_SER_EN);
 }
 
-static int mtk_hdmi_phy_power_on(struct phy *phy)
-{
-	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
-	int ret;
-
-	ret = clk_prepare_enable(hdmi_phy->pll);
-	if (ret < 0)
-		return ret;
-
-	mtk_hdmi_phy_enable_tmds(hdmi_phy);
-
-	return 0;
-}
-
-static int mtk_hdmi_phy_power_off(struct phy *phy)
-{
-	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
-
-	mtk_hdmi_phy_disable_tmds(hdmi_phy);
-	clk_disable_unprepare(hdmi_phy->pll);
-
-	return 0;
-}
-
-static const struct phy_ops mtk_hdmi_phy_ops = {
-	.power_on = mtk_hdmi_phy_power_on,
-	.power_off = mtk_hdmi_phy_power_off,
-	.owner = THIS_MODULE,
-};
-
-static int mtk_hdmi_phy_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct mtk_hdmi_phy *hdmi_phy;
-	struct resource *mem;
-	struct clk *ref_clk;
-	const char *ref_clk_name;
-	struct clk_init_data clk_init = {
-		.ops = &mtk_hdmi_pll_ops,
-		.num_parents = 1,
-		.parent_names = (const char * const *)&ref_clk_name,
-		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
-	};
-	struct phy *phy;
-	struct phy_provider *phy_provider;
-	int ret;
-
-	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
-	if (!hdmi_phy)
-		return -ENOMEM;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi_phy->regs = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(hdmi_phy->regs)) {
-		ret = PTR_ERR(hdmi_phy->regs);
-		dev_err(dev, "Failed to get memory resource: %d\n", ret);
-		return ret;
-	}
-
-	ref_clk = devm_clk_get(dev, "pll_ref");
-	if (IS_ERR(ref_clk)) {
-		ret = PTR_ERR(ref_clk);
-		dev_err(&pdev->dev, "Failed to get PLL reference clock: %d\n",
-			ret);
-		return ret;
-	}
-	ref_clk_name = __clk_get_name(ref_clk);
-
-	ret = of_property_read_string(dev->of_node, "clock-output-names",
-				      &clk_init.name);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
-		return ret;
-	}
-
-	hdmi_phy->pll_hw.init = &clk_init;
-	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
-	if (IS_ERR(hdmi_phy->pll)) {
-		ret = PTR_ERR(hdmi_phy->pll);
-		dev_err(dev, "Failed to register PLL: %d\n", ret);
-		return ret;
-	}
-
-	ret = of_property_read_u32(dev->of_node, "mediatek,ibias",
-				   &hdmi_phy->ibias);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get ibias: %d\n", ret);
-		return ret;
-	}
-
-	ret = of_property_read_u32(dev->of_node, "mediatek,ibias_up",
-				   &hdmi_phy->ibias_up);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get ibias up: %d\n", ret);
-		return ret;
-	}
-
-	dev_info(dev, "Using default TX DRV impedance: 4.2k/36\n");
-	hdmi_phy->drv_imp_clk = 0x30;
-	hdmi_phy->drv_imp_d2 = 0x30;
-	hdmi_phy->drv_imp_d1 = 0x30;
-	hdmi_phy->drv_imp_d0 = 0x30;
-
-	phy = devm_phy_create(dev, NULL, &mtk_hdmi_phy_ops);
-	if (IS_ERR(phy)) {
-		dev_err(dev, "Failed to create HDMI PHY\n");
-		return PTR_ERR(phy);
-	}
-	phy_set_drvdata(phy, hdmi_phy);
-
-	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(phy_provider))
-		return PTR_ERR(phy_provider);
-
-	hdmi_phy->dev = dev;
-	return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
-				   hdmi_phy->pll);
-}
-
-static int mtk_hdmi_phy_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static const struct of_device_id mtk_hdmi_phy_match[] = {
-	{ .compatible = "mediatek,mt8173-hdmi-phy", },
-	{},
-};
-
-struct platform_driver mtk_hdmi_phy_driver = {
-	.probe = mtk_hdmi_phy_probe,
-	.remove = mtk_hdmi_phy_remove,
-	.driver = {
-		.name = "mediatek-hdmi-phy",
-		.of_match_table = mtk_hdmi_phy_match,
-	},
+struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf = {
+	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
+	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
+	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
 };
 
 MODULE_AUTHOR("Jie Qiu <jie.qiu@mediatek.com>");
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 07/12] drm/mediatek: separate hdmi phy to different file
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

Different IC has different phy setting of HDMI.
This patch separates the phy hardware relate part for mt8173.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile              |   6 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   1 +
 drivers/gpu/drm/mediatek/mtk_hdmi.h            |   2 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 210 +++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  54 +++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +-----------------------
 6 files changed, 276 insertions(+), 201 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index ce83c396a742..61cf0d2ab28a 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+
 mediatek-drm-y := mtk_disp_color.o \
 		  mtk_disp_ovl.o \
 		  mtk_disp_rdma.o \
@@ -18,6 +19,7 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 mediatek-drm-hdmi-objs := mtk_cec.o \
 			  mtk_hdmi.o \
 			  mtk_hdmi_ddc.o \
-			  mtk_mt8173_hdmi_phy.o
+			  mtk_mt8173_hdmi_phy.o \
+			  mtk_hdmi_phy.o
 
-obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
+obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 2d45d1dd9554..2ca9f6a64dab 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -233,6 +233,7 @@ static void mtk_hdmi_hw_vid_black(struct mtk_hdmi *hdmi, bool black)
 static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
 {
 	struct arm_smccc_res res;
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(hdmi->phy);
 
 	/*
 	 * MT8173 HDMI hardware has an output control bit to enable/disable HDMI
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.h b/drivers/gpu/drm/mediatek/mtk_hdmi.h
index 6371b3de1ff6..3e9fb8d19802 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.h
@@ -13,11 +13,11 @@
  */
 #ifndef _MTK_HDMI_CTRL_H
 #define _MTK_HDMI_CTRL_H
+#include "mtk_hdmi_phy.h"
 
 struct platform_driver;
 
 extern struct platform_driver mtk_cec_driver;
 extern struct platform_driver mtk_hdmi_ddc_driver;
-extern struct platform_driver mtk_hdmi_phy_driver;
 
 #endif /* _MTK_HDMI_CTRL_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
new file mode 100644
index 000000000000..d2dc50db1feb
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jie Qiu <jie.qiu@mediatek.com>
+ */
+
+#include "mtk_hdmi_phy.h"
+
+static int mtk_hdmi_phy_power_on(struct phy *phy);
+static int mtk_hdmi_phy_power_off(struct phy *phy);
+
+static const struct phy_ops mtk_hdmi_phy_dev_ops = {
+	.power_on = mtk_hdmi_phy_power_on,
+	.power_off = mtk_hdmi_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			     u32 bits)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp &= ~bits;
+	writel(tmp, reg);
+}
+
+void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			   u32 bits)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp |= bits;
+	writel(tmp, reg);
+}
+
+void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+		       u32 val, u32 mask)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp = (tmp & ~mask) | (val & mask);
+	writel(tmp, reg);
+}
+
+inline struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct mtk_hdmi_phy, pll_hw);
+}
+
+static int mtk_hdmi_phy_power_on(struct phy *phy)
+{
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(hdmi_phy->pll);
+	if (ret < 0)
+		return ret;
+
+	hdmi_phy->conf->hdmi_phy_enable_tmds(hdmi_phy);
+	return 0;
+}
+
+static int mtk_hdmi_phy_power_off(struct phy *phy)
+{
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+
+	hdmi_phy->conf->hdmi_phy_disable_tmds(hdmi_phy);
+	clk_disable_unprepare(hdmi_phy->pll);
+
+	return 0;
+}
+
+static const struct phy_ops *
+mtk_hdmi_phy_dev_get_ops(const struct mtk_hdmi_phy *hdmi_phy)
+{
+	if (hdmi_phy && hdmi_phy->conf &&
+	    hdmi_phy->conf->hdmi_phy_enable_tmds &&
+	    hdmi_phy->conf->hdmi_phy_disable_tmds)
+		return &mtk_hdmi_phy_dev_ops;
+
+	dev_err(hdmi_phy->dev, "Failed to get dev ops of phy\n");
+		return NULL;
+}
+
+static void mtk_hdmi_phy_clk_get_ops(struct mtk_hdmi_phy *hdmi_phy,
+				     const struct clk_ops **ops)
+{
+	if (hdmi_phy && hdmi_phy->conf && hdmi_phy->conf->hdmi_phy_clk_ops)
+		*ops = hdmi_phy->conf->hdmi_phy_clk_ops;
+	else
+		dev_err(hdmi_phy->dev, "Failed to get clk ops of phy\n");
+}
+
+static int mtk_hdmi_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_hdmi_phy *hdmi_phy;
+	struct resource *mem;
+	struct clk *ref_clk;
+	const char *ref_clk_name;
+	struct clk_init_data clk_init = {
+		.num_parents = 1,
+		.parent_names = (const char * const *)&ref_clk_name,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
+	};
+
+	struct phy *phy;
+	struct phy_provider *phy_provider;
+	int ret;
+
+	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
+	if (!hdmi_phy)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi_phy->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hdmi_phy->regs)) {
+		ret = PTR_ERR(hdmi_phy->regs);
+		dev_err(dev, "Failed to get memory resource: %d\n", ret);
+		return ret;
+	}
+
+	ref_clk = devm_clk_get(dev, "pll_ref");
+	if (IS_ERR(ref_clk)) {
+		ret = PTR_ERR(ref_clk);
+		dev_err(&pdev->dev, "Failed to get PLL reference clock: %d\n",
+			ret);
+		return ret;
+	}
+	ref_clk_name = __clk_get_name(ref_clk);
+
+	ret = of_property_read_string(dev->of_node, "clock-output-names",
+				      &clk_init.name);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
+		return ret;
+	}
+
+	hdmi_phy->dev = dev;
+	hdmi_phy->conf =
+		(struct mtk_hdmi_phy_conf *)of_device_get_match_data(dev);
+	mtk_hdmi_phy_clk_get_ops(hdmi_phy, &clk_init.ops);
+	hdmi_phy->pll_hw.init = &clk_init;
+	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
+	if (IS_ERR(hdmi_phy->pll)) {
+		ret = PTR_ERR(hdmi_phy->pll);
+		dev_err(dev, "Failed to register PLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "mediatek,ibias",
+				   &hdmi_phy->ibias);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get ibias: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "mediatek,ibias_up",
+				   &hdmi_phy->ibias_up);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get ibias up: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "Using default TX DRV impedance: 4.2k/36\n");
+	hdmi_phy->drv_imp_clk = 0x30;
+	hdmi_phy->drv_imp_d2 = 0x30;
+	hdmi_phy->drv_imp_d1 = 0x30;
+	hdmi_phy->drv_imp_d0 = 0x30;
+
+	phy = devm_phy_create(dev, NULL, mtk_hdmi_phy_dev_get_ops(hdmi_phy));
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create HDMI PHY\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, hdmi_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register HDMI PHY\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
+				   hdmi_phy->pll);
+}
+
+static const struct of_device_id mtk_hdmi_phy_match[] = {
+	{ .compatible = "mediatek,mt8173-hdmi-phy",
+	  .data = &mtk_hdmi_phy_8173_conf,
+	},
+	{},
+};
+
+struct platform_driver mtk_hdmi_phy_driver = {
+	.probe = mtk_hdmi_phy_probe,
+	.driver = {
+		.name = "mediatek-hdmi-phy",
+		.of_match_table = mtk_hdmi_phy_match,
+	},
+};
+
+MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
new file mode 100644
index 000000000000..e346fe319621
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chunhui Dai <chunhui.dai@mediatek.com>
+ */
+
+#ifndef _MTK_HDMI_PHY_H
+#define _MTK_HDMI_PHY_H
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+struct mtk_hdmi_phy;
+
+struct mtk_hdmi_phy_conf {
+	const struct clk_ops *hdmi_phy_clk_ops;
+	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
+	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
+};
+
+struct mtk_hdmi_phy {
+	void __iomem *regs;
+	struct device *dev;
+	struct mtk_hdmi_phy_conf *conf;
+	struct clk *pll;
+	struct clk_hw pll_hw;
+	unsigned long pll_rate;
+	unsigned char drv_imp_clk;
+	unsigned char drv_imp_d2;
+	unsigned char drv_imp_d1;
+	unsigned char drv_imp_d0;
+	unsigned int ibias;
+	unsigned int ibias_up;
+};
+
+void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			     u32 bits);
+void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			   u32 bits);
+void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+		       u32 val, u32 mask);
+struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
+
+extern struct platform_driver mtk_hdmi_phy_driver;
+extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
+
+#endif /* _MTK_HDMI_PHY_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index 51cb9cfb6646..5dea03334042 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -12,15 +12,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
+#include "mtk_hdmi_phy.h"
 
 #define HDMI_CON0		0x00
 #define RG_HDMITX_PLL_EN		BIT(31)
@@ -123,20 +115,6 @@
 #define RGS_HDMITX_5T1_EDG		(0xf << 4)
 #define RGS_HDMITX_PLUG_TST		BIT(0)
 
-struct mtk_hdmi_phy {
-	void __iomem *regs;
-	struct device *dev;
-	struct clk *pll;
-	struct clk_hw pll_hw;
-	unsigned long pll_rate;
-	u8 drv_imp_clk;
-	u8 drv_imp_d2;
-	u8 drv_imp_d1;
-	u8 drv_imp_d0;
-	u32 ibias;
-	u32 ibias_up;
-};
-
 static const u8 PREDIV[3][4] = {
 	{0x0, 0x0, 0x0, 0x0},	/* 27Mhz */
 	{0x1, 0x1, 0x1, 0x1},	/* 74Mhz */
@@ -185,44 +163,6 @@ static const u8 HTPLLBR[3][4] = {
 	{0x1, 0x2, 0x2, 0x1}	/* 148Mhz */
 };
 
-static void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-				    u32 bits)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp &= ~bits;
-	writel(tmp, reg);
-}
-
-static void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-				  u32 bits)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp |= bits;
-	writel(tmp, reg);
-}
-
-static void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-			      u32 val, u32 mask)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp = (tmp & ~mask) | (val & mask);
-	writel(tmp, reg);
-}
-
-static inline struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw)
-{
-	return container_of(hw, struct mtk_hdmi_phy, pll_hw);
-}
-
 static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
@@ -367,7 +307,7 @@ static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
 	return hdmi_phy->pll_rate;
 }
 
-static const struct clk_ops mtk_hdmi_pll_ops = {
+static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
 	.set_rate = mtk_hdmi_pll_set_rate,
@@ -390,142 +330,10 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 				RG_HDMITX_SER_EN);
 }
 
-static int mtk_hdmi_phy_power_on(struct phy *phy)
-{
-	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
-	int ret;
-
-	ret = clk_prepare_enable(hdmi_phy->pll);
-	if (ret < 0)
-		return ret;
-
-	mtk_hdmi_phy_enable_tmds(hdmi_phy);
-
-	return 0;
-}
-
-static int mtk_hdmi_phy_power_off(struct phy *phy)
-{
-	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
-
-	mtk_hdmi_phy_disable_tmds(hdmi_phy);
-	clk_disable_unprepare(hdmi_phy->pll);
-
-	return 0;
-}
-
-static const struct phy_ops mtk_hdmi_phy_ops = {
-	.power_on = mtk_hdmi_phy_power_on,
-	.power_off = mtk_hdmi_phy_power_off,
-	.owner = THIS_MODULE,
-};
-
-static int mtk_hdmi_phy_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct mtk_hdmi_phy *hdmi_phy;
-	struct resource *mem;
-	struct clk *ref_clk;
-	const char *ref_clk_name;
-	struct clk_init_data clk_init = {
-		.ops = &mtk_hdmi_pll_ops,
-		.num_parents = 1,
-		.parent_names = (const char * const *)&ref_clk_name,
-		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
-	};
-	struct phy *phy;
-	struct phy_provider *phy_provider;
-	int ret;
-
-	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
-	if (!hdmi_phy)
-		return -ENOMEM;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi_phy->regs = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(hdmi_phy->regs)) {
-		ret = PTR_ERR(hdmi_phy->regs);
-		dev_err(dev, "Failed to get memory resource: %d\n", ret);
-		return ret;
-	}
-
-	ref_clk = devm_clk_get(dev, "pll_ref");
-	if (IS_ERR(ref_clk)) {
-		ret = PTR_ERR(ref_clk);
-		dev_err(&pdev->dev, "Failed to get PLL reference clock: %d\n",
-			ret);
-		return ret;
-	}
-	ref_clk_name = __clk_get_name(ref_clk);
-
-	ret = of_property_read_string(dev->of_node, "clock-output-names",
-				      &clk_init.name);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
-		return ret;
-	}
-
-	hdmi_phy->pll_hw.init = &clk_init;
-	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
-	if (IS_ERR(hdmi_phy->pll)) {
-		ret = PTR_ERR(hdmi_phy->pll);
-		dev_err(dev, "Failed to register PLL: %d\n", ret);
-		return ret;
-	}
-
-	ret = of_property_read_u32(dev->of_node, "mediatek,ibias",
-				   &hdmi_phy->ibias);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get ibias: %d\n", ret);
-		return ret;
-	}
-
-	ret = of_property_read_u32(dev->of_node, "mediatek,ibias_up",
-				   &hdmi_phy->ibias_up);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get ibias up: %d\n", ret);
-		return ret;
-	}
-
-	dev_info(dev, "Using default TX DRV impedance: 4.2k/36\n");
-	hdmi_phy->drv_imp_clk = 0x30;
-	hdmi_phy->drv_imp_d2 = 0x30;
-	hdmi_phy->drv_imp_d1 = 0x30;
-	hdmi_phy->drv_imp_d0 = 0x30;
-
-	phy = devm_phy_create(dev, NULL, &mtk_hdmi_phy_ops);
-	if (IS_ERR(phy)) {
-		dev_err(dev, "Failed to create HDMI PHY\n");
-		return PTR_ERR(phy);
-	}
-	phy_set_drvdata(phy, hdmi_phy);
-
-	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(phy_provider))
-		return PTR_ERR(phy_provider);
-
-	hdmi_phy->dev = dev;
-	return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
-				   hdmi_phy->pll);
-}
-
-static int mtk_hdmi_phy_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static const struct of_device_id mtk_hdmi_phy_match[] = {
-	{ .compatible = "mediatek,mt8173-hdmi-phy", },
-	{},
-};
-
-struct platform_driver mtk_hdmi_phy_driver = {
-	.probe = mtk_hdmi_phy_probe,
-	.remove = mtk_hdmi_phy_remove,
-	.driver = {
-		.name = "mediatek-hdmi-phy",
-		.of_match_table = mtk_hdmi_phy_match,
-	},
+struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf = {
+	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
+	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
+	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
 };
 
 MODULE_AUTHOR("Jie Qiu <jie.qiu@mediatek.com>");
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 07/12] drm/mediatek: separate hdmi phy to different file
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

Different IC has different phy setting of HDMI.
This patch separates the phy hardware relate part for mt8173.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile              |   6 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   1 +
 drivers/gpu/drm/mediatek/mtk_hdmi.h            |   2 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        | 210 +++++++++++++++++++++++++
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |  54 +++++++
 drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 204 +-----------------------
 6 files changed, 276 insertions(+), 201 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
 create mode 100644 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index ce83c396a742..61cf0d2ab28a 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+
 mediatek-drm-y := mtk_disp_color.o \
 		  mtk_disp_ovl.o \
 		  mtk_disp_rdma.o \
@@ -18,6 +19,7 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 mediatek-drm-hdmi-objs := mtk_cec.o \
 			  mtk_hdmi.o \
 			  mtk_hdmi_ddc.o \
-			  mtk_mt8173_hdmi_phy.o
+			  mtk_mt8173_hdmi_phy.o \
+			  mtk_hdmi_phy.o
 
-obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
+obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
\ No newline at end of file
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 2d45d1dd9554..2ca9f6a64dab 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -233,6 +233,7 @@ static void mtk_hdmi_hw_vid_black(struct mtk_hdmi *hdmi, bool black)
 static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
 {
 	struct arm_smccc_res res;
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(hdmi->phy);
 
 	/*
 	 * MT8173 HDMI hardware has an output control bit to enable/disable HDMI
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.h b/drivers/gpu/drm/mediatek/mtk_hdmi.h
index 6371b3de1ff6..3e9fb8d19802 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.h
@@ -13,11 +13,11 @@
  */
 #ifndef _MTK_HDMI_CTRL_H
 #define _MTK_HDMI_CTRL_H
+#include "mtk_hdmi_phy.h"
 
 struct platform_driver;
 
 extern struct platform_driver mtk_cec_driver;
 extern struct platform_driver mtk_hdmi_ddc_driver;
-extern struct platform_driver mtk_hdmi_phy_driver;
 
 #endif /* _MTK_HDMI_CTRL_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
new file mode 100644
index 000000000000..d2dc50db1feb
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -0,0 +1,210 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jie Qiu <jie.qiu@mediatek.com>
+ */
+
+#include "mtk_hdmi_phy.h"
+
+static int mtk_hdmi_phy_power_on(struct phy *phy);
+static int mtk_hdmi_phy_power_off(struct phy *phy);
+
+static const struct phy_ops mtk_hdmi_phy_dev_ops = {
+	.power_on = mtk_hdmi_phy_power_on,
+	.power_off = mtk_hdmi_phy_power_off,
+	.owner = THIS_MODULE,
+};
+
+void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			     u32 bits)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp &= ~bits;
+	writel(tmp, reg);
+}
+
+void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			   u32 bits)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp |= bits;
+	writel(tmp, reg);
+}
+
+void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+		       u32 val, u32 mask)
+{
+	void __iomem *reg = hdmi_phy->regs + offset;
+	u32 tmp;
+
+	tmp = readl(reg);
+	tmp = (tmp & ~mask) | (val & mask);
+	writel(tmp, reg);
+}
+
+inline struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw)
+{
+	return container_of(hw, struct mtk_hdmi_phy, pll_hw);
+}
+
+static int mtk_hdmi_phy_power_on(struct phy *phy)
+{
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+	int ret;
+
+	ret = clk_prepare_enable(hdmi_phy->pll);
+	if (ret < 0)
+		return ret;
+
+	hdmi_phy->conf->hdmi_phy_enable_tmds(hdmi_phy);
+	return 0;
+}
+
+static int mtk_hdmi_phy_power_off(struct phy *phy)
+{
+	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
+
+	hdmi_phy->conf->hdmi_phy_disable_tmds(hdmi_phy);
+	clk_disable_unprepare(hdmi_phy->pll);
+
+	return 0;
+}
+
+static const struct phy_ops *
+mtk_hdmi_phy_dev_get_ops(const struct mtk_hdmi_phy *hdmi_phy)
+{
+	if (hdmi_phy && hdmi_phy->conf &&
+	    hdmi_phy->conf->hdmi_phy_enable_tmds &&
+	    hdmi_phy->conf->hdmi_phy_disable_tmds)
+		return &mtk_hdmi_phy_dev_ops;
+
+	dev_err(hdmi_phy->dev, "Failed to get dev ops of phy\n");
+		return NULL;
+}
+
+static void mtk_hdmi_phy_clk_get_ops(struct mtk_hdmi_phy *hdmi_phy,
+				     const struct clk_ops **ops)
+{
+	if (hdmi_phy && hdmi_phy->conf && hdmi_phy->conf->hdmi_phy_clk_ops)
+		*ops = hdmi_phy->conf->hdmi_phy_clk_ops;
+	else
+		dev_err(hdmi_phy->dev, "Failed to get clk ops of phy\n");
+}
+
+static int mtk_hdmi_phy_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mtk_hdmi_phy *hdmi_phy;
+	struct resource *mem;
+	struct clk *ref_clk;
+	const char *ref_clk_name;
+	struct clk_init_data clk_init = {
+		.num_parents = 1,
+		.parent_names = (const char * const *)&ref_clk_name,
+		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
+	};
+
+	struct phy *phy;
+	struct phy_provider *phy_provider;
+	int ret;
+
+	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
+	if (!hdmi_phy)
+		return -ENOMEM;
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	hdmi_phy->regs = devm_ioremap_resource(dev, mem);
+	if (IS_ERR(hdmi_phy->regs)) {
+		ret = PTR_ERR(hdmi_phy->regs);
+		dev_err(dev, "Failed to get memory resource: %d\n", ret);
+		return ret;
+	}
+
+	ref_clk = devm_clk_get(dev, "pll_ref");
+	if (IS_ERR(ref_clk)) {
+		ret = PTR_ERR(ref_clk);
+		dev_err(&pdev->dev, "Failed to get PLL reference clock: %d\n",
+			ret);
+		return ret;
+	}
+	ref_clk_name = __clk_get_name(ref_clk);
+
+	ret = of_property_read_string(dev->of_node, "clock-output-names",
+				      &clk_init.name);
+	if (ret < 0) {
+		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
+		return ret;
+	}
+
+	hdmi_phy->dev = dev;
+	hdmi_phy->conf =
+		(struct mtk_hdmi_phy_conf *)of_device_get_match_data(dev);
+	mtk_hdmi_phy_clk_get_ops(hdmi_phy, &clk_init.ops);
+	hdmi_phy->pll_hw.init = &clk_init;
+	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
+	if (IS_ERR(hdmi_phy->pll)) {
+		ret = PTR_ERR(hdmi_phy->pll);
+		dev_err(dev, "Failed to register PLL: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "mediatek,ibias",
+				   &hdmi_phy->ibias);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get ibias: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_property_read_u32(dev->of_node, "mediatek,ibias_up",
+				   &hdmi_phy->ibias_up);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to get ibias up: %d\n", ret);
+		return ret;
+	}
+
+	dev_info(dev, "Using default TX DRV impedance: 4.2k/36\n");
+	hdmi_phy->drv_imp_clk = 0x30;
+	hdmi_phy->drv_imp_d2 = 0x30;
+	hdmi_phy->drv_imp_d1 = 0x30;
+	hdmi_phy->drv_imp_d0 = 0x30;
+
+	phy = devm_phy_create(dev, NULL, mtk_hdmi_phy_dev_get_ops(hdmi_phy));
+	if (IS_ERR(phy)) {
+		dev_err(dev, "Failed to create HDMI PHY\n");
+		return PTR_ERR(phy);
+	}
+	phy_set_drvdata(phy, hdmi_phy);
+
+	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+	if (IS_ERR(phy_provider)) {
+		dev_err(dev, "Failed to register HDMI PHY\n");
+		return PTR_ERR(phy_provider);
+	}
+
+	return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
+				   hdmi_phy->pll);
+}
+
+static const struct of_device_id mtk_hdmi_phy_match[] = {
+	{ .compatible = "mediatek,mt8173-hdmi-phy",
+	  .data = &mtk_hdmi_phy_8173_conf,
+	},
+	{},
+};
+
+struct platform_driver mtk_hdmi_phy_driver = {
+	.probe = mtk_hdmi_phy_probe,
+	.driver = {
+		.name = "mediatek-hdmi-phy",
+		.of_match_table = mtk_hdmi_phy_match,
+	},
+};
+
+MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
new file mode 100644
index 000000000000..e346fe319621
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -0,0 +1,54 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chunhui Dai <chunhui.dai@mediatek.com>
+ */
+
+#ifndef _MTK_HDMI_PHY_H
+#define _MTK_HDMI_PHY_H
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+struct mtk_hdmi_phy;
+
+struct mtk_hdmi_phy_conf {
+	const struct clk_ops *hdmi_phy_clk_ops;
+	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
+	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
+};
+
+struct mtk_hdmi_phy {
+	void __iomem *regs;
+	struct device *dev;
+	struct mtk_hdmi_phy_conf *conf;
+	struct clk *pll;
+	struct clk_hw pll_hw;
+	unsigned long pll_rate;
+	unsigned char drv_imp_clk;
+	unsigned char drv_imp_d2;
+	unsigned char drv_imp_d1;
+	unsigned char drv_imp_d0;
+	unsigned int ibias;
+	unsigned int ibias_up;
+};
+
+void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			     u32 bits);
+void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+			   u32 bits);
+void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
+		       u32 val, u32 mask);
+struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
+
+extern struct platform_driver mtk_hdmi_phy_driver;
+extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
+
+#endif /* _MTK_HDMI_PHY_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
index 51cb9cfb6646..5dea03334042 100644
--- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c
@@ -12,15 +12,7 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/phy/phy.h>
-#include <linux/platform_device.h>
-#include <linux/types.h>
+#include "mtk_hdmi_phy.h"
 
 #define HDMI_CON0		0x00
 #define RG_HDMITX_PLL_EN		BIT(31)
@@ -123,20 +115,6 @@
 #define RGS_HDMITX_5T1_EDG		(0xf << 4)
 #define RGS_HDMITX_PLUG_TST		BIT(0)
 
-struct mtk_hdmi_phy {
-	void __iomem *regs;
-	struct device *dev;
-	struct clk *pll;
-	struct clk_hw pll_hw;
-	unsigned long pll_rate;
-	u8 drv_imp_clk;
-	u8 drv_imp_d2;
-	u8 drv_imp_d1;
-	u8 drv_imp_d0;
-	u32 ibias;
-	u32 ibias_up;
-};
-
 static const u8 PREDIV[3][4] = {
 	{0x0, 0x0, 0x0, 0x0},	/* 27Mhz */
 	{0x1, 0x1, 0x1, 0x1},	/* 74Mhz */
@@ -185,44 +163,6 @@ static const u8 HTPLLBR[3][4] = {
 	{0x1, 0x2, 0x2, 0x1}	/* 148Mhz */
 };
 
-static void mtk_hdmi_phy_clear_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-				    u32 bits)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp &= ~bits;
-	writel(tmp, reg);
-}
-
-static void mtk_hdmi_phy_set_bits(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-				  u32 bits)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp |= bits;
-	writel(tmp, reg);
-}
-
-static void mtk_hdmi_phy_mask(struct mtk_hdmi_phy *hdmi_phy, u32 offset,
-			      u32 val, u32 mask)
-{
-	void __iomem *reg = hdmi_phy->regs + offset;
-	u32 tmp;
-
-	tmp = readl(reg);
-	tmp = (tmp & ~mask) | (val & mask);
-	writel(tmp, reg);
-}
-
-static inline struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw)
-{
-	return container_of(hw, struct mtk_hdmi_phy, pll_hw);
-}
-
 static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
 {
 	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
@@ -367,7 +307,7 @@ static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
 	return hdmi_phy->pll_rate;
 }
 
-static const struct clk_ops mtk_hdmi_pll_ops = {
+static const struct clk_ops mtk_hdmi_phy_pll_ops = {
 	.prepare = mtk_hdmi_pll_prepare,
 	.unprepare = mtk_hdmi_pll_unprepare,
 	.set_rate = mtk_hdmi_pll_set_rate,
@@ -390,142 +330,10 @@ static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
 				RG_HDMITX_SER_EN);
 }
 
-static int mtk_hdmi_phy_power_on(struct phy *phy)
-{
-	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
-	int ret;
-
-	ret = clk_prepare_enable(hdmi_phy->pll);
-	if (ret < 0)
-		return ret;
-
-	mtk_hdmi_phy_enable_tmds(hdmi_phy);
-
-	return 0;
-}
-
-static int mtk_hdmi_phy_power_off(struct phy *phy)
-{
-	struct mtk_hdmi_phy *hdmi_phy = phy_get_drvdata(phy);
-
-	mtk_hdmi_phy_disable_tmds(hdmi_phy);
-	clk_disable_unprepare(hdmi_phy->pll);
-
-	return 0;
-}
-
-static const struct phy_ops mtk_hdmi_phy_ops = {
-	.power_on = mtk_hdmi_phy_power_on,
-	.power_off = mtk_hdmi_phy_power_off,
-	.owner = THIS_MODULE,
-};
-
-static int mtk_hdmi_phy_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct mtk_hdmi_phy *hdmi_phy;
-	struct resource *mem;
-	struct clk *ref_clk;
-	const char *ref_clk_name;
-	struct clk_init_data clk_init = {
-		.ops = &mtk_hdmi_pll_ops,
-		.num_parents = 1,
-		.parent_names = (const char * const *)&ref_clk_name,
-		.flags = CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
-	};
-	struct phy *phy;
-	struct phy_provider *phy_provider;
-	int ret;
-
-	hdmi_phy = devm_kzalloc(dev, sizeof(*hdmi_phy), GFP_KERNEL);
-	if (!hdmi_phy)
-		return -ENOMEM;
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	hdmi_phy->regs = devm_ioremap_resource(dev, mem);
-	if (IS_ERR(hdmi_phy->regs)) {
-		ret = PTR_ERR(hdmi_phy->regs);
-		dev_err(dev, "Failed to get memory resource: %d\n", ret);
-		return ret;
-	}
-
-	ref_clk = devm_clk_get(dev, "pll_ref");
-	if (IS_ERR(ref_clk)) {
-		ret = PTR_ERR(ref_clk);
-		dev_err(&pdev->dev, "Failed to get PLL reference clock: %d\n",
-			ret);
-		return ret;
-	}
-	ref_clk_name = __clk_get_name(ref_clk);
-
-	ret = of_property_read_string(dev->of_node, "clock-output-names",
-				      &clk_init.name);
-	if (ret < 0) {
-		dev_err(dev, "Failed to read clock-output-names: %d\n", ret);
-		return ret;
-	}
-
-	hdmi_phy->pll_hw.init = &clk_init;
-	hdmi_phy->pll = devm_clk_register(dev, &hdmi_phy->pll_hw);
-	if (IS_ERR(hdmi_phy->pll)) {
-		ret = PTR_ERR(hdmi_phy->pll);
-		dev_err(dev, "Failed to register PLL: %d\n", ret);
-		return ret;
-	}
-
-	ret = of_property_read_u32(dev->of_node, "mediatek,ibias",
-				   &hdmi_phy->ibias);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get ibias: %d\n", ret);
-		return ret;
-	}
-
-	ret = of_property_read_u32(dev->of_node, "mediatek,ibias_up",
-				   &hdmi_phy->ibias_up);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to get ibias up: %d\n", ret);
-		return ret;
-	}
-
-	dev_info(dev, "Using default TX DRV impedance: 4.2k/36\n");
-	hdmi_phy->drv_imp_clk = 0x30;
-	hdmi_phy->drv_imp_d2 = 0x30;
-	hdmi_phy->drv_imp_d1 = 0x30;
-	hdmi_phy->drv_imp_d0 = 0x30;
-
-	phy = devm_phy_create(dev, NULL, &mtk_hdmi_phy_ops);
-	if (IS_ERR(phy)) {
-		dev_err(dev, "Failed to create HDMI PHY\n");
-		return PTR_ERR(phy);
-	}
-	phy_set_drvdata(phy, hdmi_phy);
-
-	phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
-	if (IS_ERR(phy_provider))
-		return PTR_ERR(phy_provider);
-
-	hdmi_phy->dev = dev;
-	return of_clk_add_provider(dev->of_node, of_clk_src_simple_get,
-				   hdmi_phy->pll);
-}
-
-static int mtk_hdmi_phy_remove(struct platform_device *pdev)
-{
-	return 0;
-}
-
-static const struct of_device_id mtk_hdmi_phy_match[] = {
-	{ .compatible = "mediatek,mt8173-hdmi-phy", },
-	{},
-};
-
-struct platform_driver mtk_hdmi_phy_driver = {
-	.probe = mtk_hdmi_phy_probe,
-	.remove = mtk_hdmi_phy_remove,
-	.driver = {
-		.name = "mediatek-hdmi-phy",
-		.of_match_table = mtk_hdmi_phy_match,
-	},
+struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf = {
+	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
+	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
+	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
 };
 
 MODULE_AUTHOR("Jie Qiu <jie.qiu@mediatek.com>");
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 08/12] drm/mediatek: add support for SPDIF audio in HDMI
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

add support for SPDIF audio  in HDMI

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_hdmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 2ca9f6a64dab..d62e685cec73 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1576,6 +1576,11 @@ static int mtk_hdmi_audio_hw_params(struct device *dev, void *data,
 		hdmi_params.aud_i2s_fmt = HDMI_I2S_MODE_I2S_24BIT;
 		hdmi_params.aud_mclk = HDMI_AUD_MCLK_128FS;
 		break;
+	case HDMI_SPDIF:
+		hdmi_params.aud_codec = HDMI_AUDIO_CODING_TYPE_PCM;
+		hdmi_params.aud_sampe_size = HDMI_AUDIO_SAMPLE_SIZE_16;
+		hdmi_params.aud_input_type = HDMI_AUD_INPUT_SPDIF;
+		break;
 	default:
 		dev_err(hdmi->dev, "%s: Invalid DAI format %d\n", __func__,
 			daifmt->fmt);
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 08/12] drm/mediatek: add support for SPDIF audio in HDMI
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

add support for SPDIF audio  in HDMI

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_hdmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 2ca9f6a64dab..d62e685cec73 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1576,6 +1576,11 @@ static int mtk_hdmi_audio_hw_params(struct device *dev, void *data,
 		hdmi_params.aud_i2s_fmt = HDMI_I2S_MODE_I2S_24BIT;
 		hdmi_params.aud_mclk = HDMI_AUD_MCLK_128FS;
 		break;
+	case HDMI_SPDIF:
+		hdmi_params.aud_codec = HDMI_AUDIO_CODING_TYPE_PCM;
+		hdmi_params.aud_sampe_size = HDMI_AUDIO_SAMPLE_SIZE_16;
+		hdmi_params.aud_input_type = HDMI_AUD_INPUT_SPDIF;
+		break;
 	default:
 		dev_err(hdmi->dev, "%s: Invalid DAI format %d\n", __func__,
 			daifmt->fmt);
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 08/12] drm/mediatek: add support for SPDIF audio in HDMI
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

add support for SPDIF audio  in HDMI

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_hdmi.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index 2ca9f6a64dab..d62e685cec73 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -1576,6 +1576,11 @@ static int mtk_hdmi_audio_hw_params(struct device *dev, void *data,
 		hdmi_params.aud_i2s_fmt = HDMI_I2S_MODE_I2S_24BIT;
 		hdmi_params.aud_mclk = HDMI_AUD_MCLK_128FS;
 		break;
+	case HDMI_SPDIF:
+		hdmi_params.aud_codec = HDMI_AUDIO_CODING_TYPE_PCM;
+		hdmi_params.aud_sampe_size = HDMI_AUDIO_SAMPLE_SIZE_16;
+		hdmi_params.aud_input_type = HDMI_AUD_INPUT_SPDIF;
+		break;
 	default:
 		dev_err(hdmi->dev, "%s: Invalid DAI format %d\n", __func__,
 			daifmt->fmt);
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds hdmi dirver suppot for both MT2701 and MT7623.
And also support other (existing or future) chips that use
the same binding and driver.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile              |   3 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   9 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |   3 +
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |   2 +
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
 5 files changed, 248 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index 61cf0d2ab28a..82ae49c64221 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -19,7 +19,8 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 mediatek-drm-hdmi-objs := mtk_cec.o \
 			  mtk_hdmi.o \
 			  mtk_hdmi_ddc.o \
+                          mtk_mt2701_hdmi_phy.o \
 			  mtk_mt8173_hdmi_phy.o \
 			  mtk_hdmi_phy.o
 
-obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
\ No newline at end of file
+obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index d62e685cec73..11e3644da79a 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -241,8 +241,13 @@ static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
 	 * The ARM trusted firmware provides an API for the HDMI driver to set
 	 * this control bit to enable HDMI output in supervisor mode.
 	 */
-	arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000,
-		      0, 0, 0, 0, 0, &res);
+	if (hdmi_phy->conf && hdmi_phy->conf->tz_disabled)
+		regmap_update_bits(hdmi->sys_regmap,
+				   hdmi->sys_offset + HDMI_SYS_CFG20,
+				   0x80008005, enable ? 0x80000005 : 0x8000);
+	else
+		arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904,
+			      0x80000000, 0, 0, 0, 0, 0, &res);
 
 	regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20,
 			   HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0);
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index d2dc50db1feb..52d314deacdc 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -192,6 +192,9 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_hdmi_phy_match[] = {
+	{ .compatible = "mediatek,mt2701-hdmi-phy",
+	  .data = &mtk_hdmi_phy_2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-hdmi-phy",
 	  .data = &mtk_hdmi_phy_8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index e346fe319621..a6577c8fdf83 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -20,6 +20,7 @@
 struct mtk_hdmi_phy;
 
 struct mtk_hdmi_phy_conf {
+	bool tz_disabled;
 	const struct clk_ops *hdmi_phy_clk_ops;
 	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
 	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
@@ -50,5 +51,6 @@ struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
 
 extern struct platform_driver mtk_hdmi_phy_driver;
 extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
+extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf;
 
 #endif /* _MTK_HDMI_PHY_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
new file mode 100644
index 000000000000..41f5dcc24c4e
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chunhui Dai <chunhui.dai@mediatek.com>
+ */
+
+#include "mtk_hdmi_phy.h"
+
+#define HDMI_CON0	0x00
+#define RG_HDMITX_DRV_IBIAS		0
+#define RG_HDMITX_DRV_IBIAS_MASK	(0x3f << 0)
+#define RG_HDMITX_EN_SER		12
+#define RG_HDMITX_EN_SER_MASK		(0x0f << 12)
+#define RG_HDMITX_EN_SLDO		16
+#define RG_HDMITX_EN_SLDO_MASK		(0x0f << 16)
+#define RG_HDMITX_EN_PRED		20
+#define RG_HDMITX_EN_PRED_MASK		(0x0f << 20)
+#define RG_HDMITX_EN_IMP		24
+#define RG_HDMITX_EN_IMP_MASK		(0x0f << 24)
+#define RG_HDMITX_EN_DRV		28
+#define RG_HDMITX_EN_DRV_MASK		(0x0f << 28)
+
+#define HDMI_CON1	0x04
+#define RG_HDMITX_PRED_IBIAS		18
+#define RG_HDMITX_PRED_IBIAS_MASK	(0x0f << 18)
+#define RG_HDMITX_PRED_IMP		(0x01 << 22)
+#define RG_HDMITX_DRV_IMP		26
+#define RG_HDMITX_DRV_IMP_MASK		(0x3f << 26)
+
+#define HDMI_CON2	0x08
+#define RG_HDMITX_EN_TX_CKLDO		(0x01 << 0)
+#define RG_HDMITX_EN_TX_POSDIV		(0x01 << 1)
+#define RG_HDMITX_TX_POSDIV		3
+#define RG_HDMITX_TX_POSDIV_MASK	(0x03 << 3)
+#define RG_HDMITX_EN_MBIAS		(0x01 << 6)
+#define RG_HDMITX_MBIAS_LPF_EN		(0x01 << 7)
+
+#define HDMI_CON4	0x10
+#define RG_HDMITX_RESERVE_MASK		(0xffffffff << 0)
+
+#define HDMI_CON6	0x18
+#define RG_HTPLL_BR			0
+#define RG_HTPLL_BR_MASK		(0x03 << 0)
+#define RG_HTPLL_BC			2
+#define RG_HTPLL_BC_MASK		(0x03 << 2)
+#define RG_HTPLL_BP			4
+#define RG_HTPLL_BP_MASK		(0x0f << 4)
+#define RG_HTPLL_IR			8
+#define RG_HTPLL_IR_MASK		(0x0f << 8)
+#define RG_HTPLL_IC			12
+#define RG_HTPLL_IC_MASK		(0x0f << 12)
+#define RG_HTPLL_POSDIV			16
+#define RG_HTPLL_POSDIV_MASK		(0x03 << 16)
+#define RG_HTPLL_PREDIV			18
+#define RG_HTPLL_PREDIV_MASK		(0x03 << 18)
+#define RG_HTPLL_FBKSEL			20
+#define RG_HTPLL_FBKSEL_MASK		(0x03 << 20)
+#define RG_HTPLL_RLH_EN			(0x01 << 22)
+#define RG_HTPLL_FBKDIV			24
+#define RG_HTPLL_FBKDIV_MASK		(0x7f << 24)
+#define RG_HTPLL_EN			(0x01 << 31)
+
+#define HDMI_CON7	0x1c
+#define RG_HTPLL_AUTOK_EN		(0x01 << 23)
+#define RG_HTPLL_DIVEN			28
+#define RG_HTPLL_DIVEN_MASK		(0x07 << 28)
+
+static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	usleep_range(80, 100);
+	return 0;
+}
+
+static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	usleep_range(80, 100);
+}
+
+static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+	u32 pos_div;
+
+	if (rate <= 64000000)
+		pos_div = 3;
+	else if (rate <= 12800000)
+		pos_div = 1;
+	else
+		pos_div = 1;
+
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
+			  RG_HTPLL_IC_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
+			  RG_HTPLL_IR_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON2, (pos_div << RG_HDMITX_TX_POSDIV),
+			  RG_HDMITX_TX_POSDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (1 << RG_HTPLL_FBKSEL),
+			  RG_HTPLL_FBKSEL_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (19 << RG_HTPLL_FBKDIV),
+			  RG_HTPLL_FBKDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON7, (0x2 << RG_HTPLL_DIVEN),
+			  RG_HTPLL_DIVEN_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0xc << RG_HTPLL_BP),
+			  RG_HTPLL_BP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x2 << RG_HTPLL_BC),
+			  RG_HTPLL_BC_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_BR),
+			  RG_HTPLL_BR_MASK);
+
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON1, RG_HDMITX_PRED_IMP);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x3 << RG_HDMITX_PRED_IBIAS),
+			  RG_HDMITX_PRED_IBIAS_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_IMP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x28 << RG_HDMITX_DRV_IMP),
+			  RG_HDMITX_DRV_IMP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, 0x28, RG_HDMITX_RESERVE_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON0, (0xa << RG_HDMITX_DRV_IBIAS),
+			  RG_HDMITX_DRV_IBIAS_MASK);
+	return 0;
+}
+
+static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	hdmi_phy->pll_rate = rate;
+	if (rate <= 74250000)
+		*parent_rate = rate;
+	else
+		*parent_rate = rate / 2;
+
+	return rate;
+}
+
+static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	return hdmi_phy->pll_rate;
+}
+
+static const struct clk_ops mtk_hdmi_phy_pll_ops = {
+	.prepare = mtk_hdmi_pll_prepare,
+	.unprepare = mtk_hdmi_pll_unprepare,
+	.set_rate = mtk_hdmi_pll_set_rate,
+	.round_rate = mtk_hdmi_pll_round_rate,
+	.recalc_rate = mtk_hdmi_pll_recalc_rate,
+};
+
+static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
+{
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	usleep_range(80, 100);
+}
+
+static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
+{
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	usleep_range(80, 100);
+}
+
+struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
+	.tz_disabled = true,
+	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
+	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
+	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
+};
+
+MODULE_AUTHOR("Chunhui Dai <chunhui.dai@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds hdmi dirver suppot for both MT2701 and MT7623.
And also support other (existing or future) chips that use
the same binding and driver.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile              |   3 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   9 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |   3 +
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |   2 +
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
 5 files changed, 248 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index 61cf0d2ab28a..82ae49c64221 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -19,7 +19,8 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 mediatek-drm-hdmi-objs := mtk_cec.o \
 			  mtk_hdmi.o \
 			  mtk_hdmi_ddc.o \
+                          mtk_mt2701_hdmi_phy.o \
 			  mtk_mt8173_hdmi_phy.o \
 			  mtk_hdmi_phy.o
 
-obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
\ No newline at end of file
+obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index d62e685cec73..11e3644da79a 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -241,8 +241,13 @@ static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
 	 * The ARM trusted firmware provides an API for the HDMI driver to set
 	 * this control bit to enable HDMI output in supervisor mode.
 	 */
-	arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000,
-		      0, 0, 0, 0, 0, &res);
+	if (hdmi_phy->conf && hdmi_phy->conf->tz_disabled)
+		regmap_update_bits(hdmi->sys_regmap,
+				   hdmi->sys_offset + HDMI_SYS_CFG20,
+				   0x80008005, enable ? 0x80000005 : 0x8000);
+	else
+		arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904,
+			      0x80000000, 0, 0, 0, 0, 0, &res);
 
 	regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20,
 			   HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0);
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index d2dc50db1feb..52d314deacdc 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -192,6 +192,9 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_hdmi_phy_match[] = {
+	{ .compatible = "mediatek,mt2701-hdmi-phy",
+	  .data = &mtk_hdmi_phy_2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-hdmi-phy",
 	  .data = &mtk_hdmi_phy_8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index e346fe319621..a6577c8fdf83 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -20,6 +20,7 @@
 struct mtk_hdmi_phy;
 
 struct mtk_hdmi_phy_conf {
+	bool tz_disabled;
 	const struct clk_ops *hdmi_phy_clk_ops;
 	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
 	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
@@ -50,5 +51,6 @@ struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
 
 extern struct platform_driver mtk_hdmi_phy_driver;
 extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
+extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf;
 
 #endif /* _MTK_HDMI_PHY_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
new file mode 100644
index 000000000000..41f5dcc24c4e
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chunhui Dai <chunhui.dai@mediatek.com>
+ */
+
+#include "mtk_hdmi_phy.h"
+
+#define HDMI_CON0	0x00
+#define RG_HDMITX_DRV_IBIAS		0
+#define RG_HDMITX_DRV_IBIAS_MASK	(0x3f << 0)
+#define RG_HDMITX_EN_SER		12
+#define RG_HDMITX_EN_SER_MASK		(0x0f << 12)
+#define RG_HDMITX_EN_SLDO		16
+#define RG_HDMITX_EN_SLDO_MASK		(0x0f << 16)
+#define RG_HDMITX_EN_PRED		20
+#define RG_HDMITX_EN_PRED_MASK		(0x0f << 20)
+#define RG_HDMITX_EN_IMP		24
+#define RG_HDMITX_EN_IMP_MASK		(0x0f << 24)
+#define RG_HDMITX_EN_DRV		28
+#define RG_HDMITX_EN_DRV_MASK		(0x0f << 28)
+
+#define HDMI_CON1	0x04
+#define RG_HDMITX_PRED_IBIAS		18
+#define RG_HDMITX_PRED_IBIAS_MASK	(0x0f << 18)
+#define RG_HDMITX_PRED_IMP		(0x01 << 22)
+#define RG_HDMITX_DRV_IMP		26
+#define RG_HDMITX_DRV_IMP_MASK		(0x3f << 26)
+
+#define HDMI_CON2	0x08
+#define RG_HDMITX_EN_TX_CKLDO		(0x01 << 0)
+#define RG_HDMITX_EN_TX_POSDIV		(0x01 << 1)
+#define RG_HDMITX_TX_POSDIV		3
+#define RG_HDMITX_TX_POSDIV_MASK	(0x03 << 3)
+#define RG_HDMITX_EN_MBIAS		(0x01 << 6)
+#define RG_HDMITX_MBIAS_LPF_EN		(0x01 << 7)
+
+#define HDMI_CON4	0x10
+#define RG_HDMITX_RESERVE_MASK		(0xffffffff << 0)
+
+#define HDMI_CON6	0x18
+#define RG_HTPLL_BR			0
+#define RG_HTPLL_BR_MASK		(0x03 << 0)
+#define RG_HTPLL_BC			2
+#define RG_HTPLL_BC_MASK		(0x03 << 2)
+#define RG_HTPLL_BP			4
+#define RG_HTPLL_BP_MASK		(0x0f << 4)
+#define RG_HTPLL_IR			8
+#define RG_HTPLL_IR_MASK		(0x0f << 8)
+#define RG_HTPLL_IC			12
+#define RG_HTPLL_IC_MASK		(0x0f << 12)
+#define RG_HTPLL_POSDIV			16
+#define RG_HTPLL_POSDIV_MASK		(0x03 << 16)
+#define RG_HTPLL_PREDIV			18
+#define RG_HTPLL_PREDIV_MASK		(0x03 << 18)
+#define RG_HTPLL_FBKSEL			20
+#define RG_HTPLL_FBKSEL_MASK		(0x03 << 20)
+#define RG_HTPLL_RLH_EN			(0x01 << 22)
+#define RG_HTPLL_FBKDIV			24
+#define RG_HTPLL_FBKDIV_MASK		(0x7f << 24)
+#define RG_HTPLL_EN			(0x01 << 31)
+
+#define HDMI_CON7	0x1c
+#define RG_HTPLL_AUTOK_EN		(0x01 << 23)
+#define RG_HTPLL_DIVEN			28
+#define RG_HTPLL_DIVEN_MASK		(0x07 << 28)
+
+static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	usleep_range(80, 100);
+	return 0;
+}
+
+static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	usleep_range(80, 100);
+}
+
+static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+	u32 pos_div;
+
+	if (rate <= 64000000)
+		pos_div = 3;
+	else if (rate <= 12800000)
+		pos_div = 1;
+	else
+		pos_div = 1;
+
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
+			  RG_HTPLL_IC_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
+			  RG_HTPLL_IR_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON2, (pos_div << RG_HDMITX_TX_POSDIV),
+			  RG_HDMITX_TX_POSDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (1 << RG_HTPLL_FBKSEL),
+			  RG_HTPLL_FBKSEL_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (19 << RG_HTPLL_FBKDIV),
+			  RG_HTPLL_FBKDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON7, (0x2 << RG_HTPLL_DIVEN),
+			  RG_HTPLL_DIVEN_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0xc << RG_HTPLL_BP),
+			  RG_HTPLL_BP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x2 << RG_HTPLL_BC),
+			  RG_HTPLL_BC_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_BR),
+			  RG_HTPLL_BR_MASK);
+
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON1, RG_HDMITX_PRED_IMP);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x3 << RG_HDMITX_PRED_IBIAS),
+			  RG_HDMITX_PRED_IBIAS_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_IMP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x28 << RG_HDMITX_DRV_IMP),
+			  RG_HDMITX_DRV_IMP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, 0x28, RG_HDMITX_RESERVE_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON0, (0xa << RG_HDMITX_DRV_IBIAS),
+			  RG_HDMITX_DRV_IBIAS_MASK);
+	return 0;
+}
+
+static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	hdmi_phy->pll_rate = rate;
+	if (rate <= 74250000)
+		*parent_rate = rate;
+	else
+		*parent_rate = rate / 2;
+
+	return rate;
+}
+
+static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	return hdmi_phy->pll_rate;
+}
+
+static const struct clk_ops mtk_hdmi_phy_pll_ops = {
+	.prepare = mtk_hdmi_pll_prepare,
+	.unprepare = mtk_hdmi_pll_unprepare,
+	.set_rate = mtk_hdmi_pll_set_rate,
+	.round_rate = mtk_hdmi_pll_round_rate,
+	.recalc_rate = mtk_hdmi_pll_recalc_rate,
+};
+
+static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
+{
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	usleep_range(80, 100);
+}
+
+static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
+{
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	usleep_range(80, 100);
+}
+
+struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
+	.tz_disabled = true,
+	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
+	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
+	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
+};
+
+MODULE_AUTHOR("Chunhui Dai <chunhui.dai@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

From: chunhui dai <chunhui.dai@mediatek.com>

This patch adds hdmi dirver suppot for both MT2701 and MT7623.
And also support other (existing or future) chips that use
the same binding and driver.

Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/Makefile              |   3 +-
 drivers/gpu/drm/mediatek/mtk_hdmi.c            |   9 +-
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |   3 +
 drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |   2 +
 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
 5 files changed, 248 insertions(+), 3 deletions(-)
 create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c

diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
index 61cf0d2ab28a..82ae49c64221 100644
--- a/drivers/gpu/drm/mediatek/Makefile
+++ b/drivers/gpu/drm/mediatek/Makefile
@@ -19,7 +19,8 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
 mediatek-drm-hdmi-objs := mtk_cec.o \
 			  mtk_hdmi.o \
 			  mtk_hdmi_ddc.o \
+                          mtk_mt2701_hdmi_phy.o \
 			  mtk_mt8173_hdmi_phy.o \
 			  mtk_hdmi_phy.o
 
-obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
\ No newline at end of file
+obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
index d62e685cec73..11e3644da79a 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
@@ -241,8 +241,13 @@ static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
 	 * The ARM trusted firmware provides an API for the HDMI driver to set
 	 * this control bit to enable HDMI output in supervisor mode.
 	 */
-	arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000,
-		      0, 0, 0, 0, 0, &res);
+	if (hdmi_phy->conf && hdmi_phy->conf->tz_disabled)
+		regmap_update_bits(hdmi->sys_regmap,
+				   hdmi->sys_offset + HDMI_SYS_CFG20,
+				   0x80008005, enable ? 0x80000005 : 0x8000);
+	else
+		arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904,
+			      0x80000000, 0, 0, 0, 0, 0, &res);
 
 	regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20,
 			   HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0);
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
index d2dc50db1feb..52d314deacdc 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
@@ -192,6 +192,9 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
 }
 
 static const struct of_device_id mtk_hdmi_phy_match[] = {
+	{ .compatible = "mediatek,mt2701-hdmi-phy",
+	  .data = &mtk_hdmi_phy_2701_conf,
+	},
 	{ .compatible = "mediatek,mt8173-hdmi-phy",
 	  .data = &mtk_hdmi_phy_8173_conf,
 	},
diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
index e346fe319621..a6577c8fdf83 100644
--- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
+++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
@@ -20,6 +20,7 @@
 struct mtk_hdmi_phy;
 
 struct mtk_hdmi_phy_conf {
+	bool tz_disabled;
 	const struct clk_ops *hdmi_phy_clk_ops;
 	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
 	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
@@ -50,5 +51,6 @@ struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
 
 extern struct platform_driver mtk_hdmi_phy_driver;
 extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
+extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf;
 
 #endif /* _MTK_HDMI_PHY_H */
diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
new file mode 100644
index 000000000000..41f5dcc24c4e
--- /dev/null
+++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Chunhui Dai <chunhui.dai@mediatek.com>
+ */
+
+#include "mtk_hdmi_phy.h"
+
+#define HDMI_CON0	0x00
+#define RG_HDMITX_DRV_IBIAS		0
+#define RG_HDMITX_DRV_IBIAS_MASK	(0x3f << 0)
+#define RG_HDMITX_EN_SER		12
+#define RG_HDMITX_EN_SER_MASK		(0x0f << 12)
+#define RG_HDMITX_EN_SLDO		16
+#define RG_HDMITX_EN_SLDO_MASK		(0x0f << 16)
+#define RG_HDMITX_EN_PRED		20
+#define RG_HDMITX_EN_PRED_MASK		(0x0f << 20)
+#define RG_HDMITX_EN_IMP		24
+#define RG_HDMITX_EN_IMP_MASK		(0x0f << 24)
+#define RG_HDMITX_EN_DRV		28
+#define RG_HDMITX_EN_DRV_MASK		(0x0f << 28)
+
+#define HDMI_CON1	0x04
+#define RG_HDMITX_PRED_IBIAS		18
+#define RG_HDMITX_PRED_IBIAS_MASK	(0x0f << 18)
+#define RG_HDMITX_PRED_IMP		(0x01 << 22)
+#define RG_HDMITX_DRV_IMP		26
+#define RG_HDMITX_DRV_IMP_MASK		(0x3f << 26)
+
+#define HDMI_CON2	0x08
+#define RG_HDMITX_EN_TX_CKLDO		(0x01 << 0)
+#define RG_HDMITX_EN_TX_POSDIV		(0x01 << 1)
+#define RG_HDMITX_TX_POSDIV		3
+#define RG_HDMITX_TX_POSDIV_MASK	(0x03 << 3)
+#define RG_HDMITX_EN_MBIAS		(0x01 << 6)
+#define RG_HDMITX_MBIAS_LPF_EN		(0x01 << 7)
+
+#define HDMI_CON4	0x10
+#define RG_HDMITX_RESERVE_MASK		(0xffffffff << 0)
+
+#define HDMI_CON6	0x18
+#define RG_HTPLL_BR			0
+#define RG_HTPLL_BR_MASK		(0x03 << 0)
+#define RG_HTPLL_BC			2
+#define RG_HTPLL_BC_MASK		(0x03 << 2)
+#define RG_HTPLL_BP			4
+#define RG_HTPLL_BP_MASK		(0x0f << 4)
+#define RG_HTPLL_IR			8
+#define RG_HTPLL_IR_MASK		(0x0f << 8)
+#define RG_HTPLL_IC			12
+#define RG_HTPLL_IC_MASK		(0x0f << 12)
+#define RG_HTPLL_POSDIV			16
+#define RG_HTPLL_POSDIV_MASK		(0x03 << 16)
+#define RG_HTPLL_PREDIV			18
+#define RG_HTPLL_PREDIV_MASK		(0x03 << 18)
+#define RG_HTPLL_FBKSEL			20
+#define RG_HTPLL_FBKSEL_MASK		(0x03 << 20)
+#define RG_HTPLL_RLH_EN			(0x01 << 22)
+#define RG_HTPLL_FBKDIV			24
+#define RG_HTPLL_FBKDIV_MASK		(0x7f << 24)
+#define RG_HTPLL_EN			(0x01 << 31)
+
+#define HDMI_CON7	0x1c
+#define RG_HTPLL_AUTOK_EN		(0x01 << 23)
+#define RG_HTPLL_DIVEN			28
+#define RG_HTPLL_DIVEN_MASK		(0x07 << 28)
+
+static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	usleep_range(80, 100);
+	return 0;
+}
+
+static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	usleep_range(80, 100);
+}
+
+static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+				 unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+	u32 pos_div;
+
+	if (rate <= 64000000)
+		pos_div = 3;
+	else if (rate <= 12800000)
+		pos_div = 1;
+	else
+		pos_div = 1;
+
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
+			  RG_HTPLL_IC_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
+			  RG_HTPLL_IR_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON2, (pos_div << RG_HDMITX_TX_POSDIV),
+			  RG_HDMITX_TX_POSDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (1 << RG_HTPLL_FBKSEL),
+			  RG_HTPLL_FBKSEL_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (19 << RG_HTPLL_FBKDIV),
+			  RG_HTPLL_FBKDIV_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON7, (0x2 << RG_HTPLL_DIVEN),
+			  RG_HTPLL_DIVEN_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0xc << RG_HTPLL_BP),
+			  RG_HTPLL_BP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x2 << RG_HTPLL_BC),
+			  RG_HTPLL_BC_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_BR),
+			  RG_HTPLL_BR_MASK);
+
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON1, RG_HDMITX_PRED_IMP);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x3 << RG_HDMITX_PRED_IBIAS),
+			  RG_HDMITX_PRED_IBIAS_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_IMP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x28 << RG_HDMITX_DRV_IMP),
+			  RG_HDMITX_DRV_IMP_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, 0x28, RG_HDMITX_RESERVE_MASK);
+	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON0, (0xa << RG_HDMITX_DRV_IBIAS),
+			  RG_HDMITX_DRV_IBIAS_MASK);
+	return 0;
+}
+
+static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+				    unsigned long *parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	hdmi_phy->pll_rate = rate;
+	if (rate <= 74250000)
+		*parent_rate = rate;
+	else
+		*parent_rate = rate / 2;
+
+	return rate;
+}
+
+static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
+					      unsigned long parent_rate)
+{
+	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
+
+	return hdmi_phy->pll_rate;
+}
+
+static const struct clk_ops mtk_hdmi_phy_pll_ops = {
+	.prepare = mtk_hdmi_pll_prepare,
+	.unprepare = mtk_hdmi_pll_unprepare,
+	.set_rate = mtk_hdmi_pll_set_rate,
+	.round_rate = mtk_hdmi_pll_round_rate,
+	.recalc_rate = mtk_hdmi_pll_recalc_rate,
+};
+
+static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
+{
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	usleep_range(80, 100);
+}
+
+static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
+{
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
+	usleep_range(80, 100);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
+	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
+	usleep_range(80, 100);
+}
+
+struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
+	.tz_disabled = true,
+	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
+	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
+	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
+};
+
+MODULE_AUTHOR("Chunhui Dai <chunhui.dai@mediatek.com>");
+MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 10/12] drm/mediatek: implement connection from BLS to DPI0
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

Modify display driver to support connection from BLS to DPI.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 87e4191c250e..f3068c62ed48 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -39,6 +39,7 @@
 #define DISP_REG_CONFIG_DISP_OVL_MOUT_EN	0x030
 #define DISP_REG_CONFIG_OUT_SEL			0x04c
 #define DISP_REG_CONFIG_DSI_SEL			0x050
+#define DISP_REG_CONFIG_DPI_SEL			0x064
 
 #define DISP_REG_MUTEX_EN(n)	(0x20 + 0x20 * (n))
 #define DISP_REG_MUTEX(n)	(0x24 + 0x20 * (n))
@@ -132,7 +133,10 @@
 
 #define OVL_MOUT_EN_RDMA		0x1
 #define BLS_TO_DSI_RDMA1_TO_DPI1	0x8
+#define BLS_TO_DPI_RDMA1_TO_DSI		0x2
 #define DSI_SEL_IN_BLS			0x0
+#define DPI_SEL_IN_BLS			0x0
+#define DSI_SEL_IN_RDMA			0x1
 
 struct mtk_disp_mutex {
 	int id;
@@ -323,9 +327,17 @@ static void mtk_ddp_sout_sel(void __iomem *config_regs,
 			     enum mtk_ddp_comp_id cur,
 			     enum mtk_ddp_comp_id next)
 {
-	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0)
+	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
 		writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
 			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
+		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
+			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+		writel_relaxed(DSI_SEL_IN_RDMA,
+			       config_regs + DISP_REG_CONFIG_DSI_SEL);
+		writel_relaxed(DPI_SEL_IN_BLS,
+			       config_regs + DISP_REG_CONFIG_DPI_SEL);
+	}
 }
 
 void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 10/12] drm/mediatek: implement connection from BLS to DPI0
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

Modify display driver to support connection from BLS to DPI.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 87e4191c250e..f3068c62ed48 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -39,6 +39,7 @@
 #define DISP_REG_CONFIG_DISP_OVL_MOUT_EN	0x030
 #define DISP_REG_CONFIG_OUT_SEL			0x04c
 #define DISP_REG_CONFIG_DSI_SEL			0x050
+#define DISP_REG_CONFIG_DPI_SEL			0x064
 
 #define DISP_REG_MUTEX_EN(n)	(0x20 + 0x20 * (n))
 #define DISP_REG_MUTEX(n)	(0x24 + 0x20 * (n))
@@ -132,7 +133,10 @@
 
 #define OVL_MOUT_EN_RDMA		0x1
 #define BLS_TO_DSI_RDMA1_TO_DPI1	0x8
+#define BLS_TO_DPI_RDMA1_TO_DSI		0x2
 #define DSI_SEL_IN_BLS			0x0
+#define DPI_SEL_IN_BLS			0x0
+#define DSI_SEL_IN_RDMA			0x1
 
 struct mtk_disp_mutex {
 	int id;
@@ -323,9 +327,17 @@ static void mtk_ddp_sout_sel(void __iomem *config_regs,
 			     enum mtk_ddp_comp_id cur,
 			     enum mtk_ddp_comp_id next)
 {
-	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0)
+	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
 		writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
 			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
+		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
+			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+		writel_relaxed(DSI_SEL_IN_RDMA,
+			       config_regs + DISP_REG_CONFIG_DSI_SEL);
+		writel_relaxed(DPI_SEL_IN_BLS,
+			       config_regs + DISP_REG_CONFIG_DPI_SEL);
+	}
 }
 
 void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 10/12] drm/mediatek: implement connection from BLS to DPI0
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

Modify display driver to support connection from BLS to DPI.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
index 87e4191c250e..f3068c62ed48 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
@@ -39,6 +39,7 @@
 #define DISP_REG_CONFIG_DISP_OVL_MOUT_EN	0x030
 #define DISP_REG_CONFIG_OUT_SEL			0x04c
 #define DISP_REG_CONFIG_DSI_SEL			0x050
+#define DISP_REG_CONFIG_DPI_SEL			0x064
 
 #define DISP_REG_MUTEX_EN(n)	(0x20 + 0x20 * (n))
 #define DISP_REG_MUTEX(n)	(0x24 + 0x20 * (n))
@@ -132,7 +133,10 @@
 
 #define OVL_MOUT_EN_RDMA		0x1
 #define BLS_TO_DSI_RDMA1_TO_DPI1	0x8
+#define BLS_TO_DPI_RDMA1_TO_DSI		0x2
 #define DSI_SEL_IN_BLS			0x0
+#define DPI_SEL_IN_BLS			0x0
+#define DSI_SEL_IN_RDMA			0x1
 
 struct mtk_disp_mutex {
 	int id;
@@ -323,9 +327,17 @@ static void mtk_ddp_sout_sel(void __iomem *config_regs,
 			     enum mtk_ddp_comp_id cur,
 			     enum mtk_ddp_comp_id next)
 {
-	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0)
+	if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
 		writel_relaxed(BLS_TO_DSI_RDMA1_TO_DPI1,
 			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+	} else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
+		writel_relaxed(BLS_TO_DPI_RDMA1_TO_DSI,
+			       config_regs + DISP_REG_CONFIG_OUT_SEL);
+		writel_relaxed(DSI_SEL_IN_RDMA,
+			       config_regs + DISP_REG_CONFIG_DSI_SEL);
+		writel_relaxed(DPI_SEL_IN_BLS,
+			       config_regs + DISP_REG_CONFIG_DPI_SEL);
+	}
 }
 
 void mtk_ddp_add_comp_to_path(void __iomem *config_regs,
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 11/12] drm/mediatek: add a error return value when clock driver has been prepared
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

DRM driver get the comp->clk by of_clk_get(), we only
assign NULL to comp->clk when error happened, but do
not return the error number.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index ff974d82a4a6..54ca794db3e9 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -294,7 +294,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 	comp->irq = of_irq_get(node, 0);
 	comp->clk = of_clk_get(node, 0);
 	if (IS_ERR(comp->clk))
-		comp->clk = NULL;
+		return PTR_ERR(comp->clk);
 
 	/* Only DMA capable components need the LARB property */
 	comp->larb_dev = NULL;
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 11/12] drm/mediatek: add a error return value when clock driver has been prepared
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

DRM driver get the comp->clk by of_clk_get(), we only
assign NULL to comp->clk when error happened, but do
not return the error number.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index ff974d82a4a6..54ca794db3e9 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -294,7 +294,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 	comp->irq = of_irq_get(node, 0);
 	comp->clk = of_clk_get(node, 0);
 	if (IS_ERR(comp->clk))
-		comp->clk = NULL;
+		return PTR_ERR(comp->clk);
 
 	/* Only DMA capable components need the LARB property */
 	comp->larb_dev = NULL;
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 11/12] drm/mediatek: add a error return value when clock driver has been prepared
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

DRM driver get the comp->clk by of_clk_get(), we only
assign NULL to comp->clk when error happened, but do
not return the error number.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
index ff974d82a4a6..54ca794db3e9 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
@@ -294,7 +294,7 @@ int mtk_ddp_comp_init(struct device *dev, struct device_node *node,
 	comp->irq = of_irq_get(node, 0);
 	comp->clk = of_clk_get(node, 0);
 	if (IS_ERR(comp->clk))
-		comp->clk = NULL;
+		return PTR_ERR(comp->clk);
 
 	/* Only DMA capable components need the LARB property */
 	comp->larb_dev = NULL;
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 12/12] drm/mediatek: config component output by device node port
  2018-09-21  3:28 ` Bibby Hsieh
  (?)
@ 2018-09-21  3:28   ` Bibby Hsieh
  -1 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

We can select output component by decive node port.
Main path default output component is DSI.
External path default output component is DPI.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 37 ++++++++++++++++++++++++++++++----
 drivers/gpu/drm/mediatek/mtk_drm_drv.h |  4 ++--
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index d961112fa2f5..a477fb878c06 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -21,7 +21,9 @@
 #include <drm/drm_of.h>
 #include <linux/component.h>
 #include <linux/iommu.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_graph.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
 
@@ -133,7 +135,7 @@ static const struct drm_mode_config_funcs mtk_drm_mode_config_funcs = {
 	.atomic_commit = mtk_atomic_commit,
 };
 
-static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
+static enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
 	DDP_COMPONENT_OVL0,
 	DDP_COMPONENT_RDMA0,
 	DDP_COMPONENT_COLOR0,
@@ -141,7 +143,7 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
 	DDP_COMPONENT_DSI0,
 };
 
-static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
+static enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
 	DDP_COMPONENT_RDMA1,
 	DDP_COMPONENT_DPI0,
 };
@@ -172,7 +174,7 @@ static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = {
 	DDP_COMPONENT_PWM2,
 };
 
-static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
+static enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
 	DDP_COMPONENT_OVL0,
 	DDP_COMPONENT_COLOR0,
 	DDP_COMPONENT_AAL0,
@@ -183,7 +185,7 @@ static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
 	DDP_COMPONENT_PWM0,
 };
 
-static const enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
+static enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
 	DDP_COMPONENT_OVL1,
 	DDP_COMPONENT_COLOR1,
 	DDP_COMPONENT_GAMMA,
@@ -472,6 +474,7 @@ static int mtk_drm_probe(struct platform_device *pdev)
 
 	/* Iterate over sibling DISP function blocks */
 	for_each_child_of_node(dev->of_node->parent, node) {
+		struct device_node *port, *ep, *remote;
 		const struct of_device_id *of_id;
 		enum mtk_ddp_comp_type comp_type;
 		int comp_id;
@@ -531,6 +534,32 @@ static int mtk_drm_probe(struct platform_device *pdev)
 
 			private->ddp_comp[comp_id] = comp;
 		}
+
+		if (comp_type != MTK_DSI && comp_type != MTK_DPI) {
+			port = of_graph_get_port_by_id(node, 0);
+			if (!port)
+				continue;
+			ep = of_get_child_by_name(port, "endpoint");
+			of_node_put(port);
+			if (!ep)
+				continue;
+			remote = of_graph_get_remote_port_parent(ep);
+			of_node_put(ep);
+			if (!remote)
+				continue;
+			of_id = of_match_node(mtk_ddp_comp_dt_ids, remote);
+			if (!of_id)
+				continue;
+			comp_type = (enum mtk_ddp_comp_type)of_id->data;
+			for (i = 0; i < private->data->main_len - 1; i++)
+				if (private->data->main_path[i] == comp_id)
+					private->data->main_path[i + 1] =
+					mtk_ddp_comp_get_id(node, comp_type);
+			for (i = 0; i < private->data->ext_len - 1; i++)
+				if (private->data->ext_path[i] == comp_id)
+					private->data->ext_path[i + 1] =
+					mtk_ddp_comp_get_id(node, comp_type);
+		}
 	}
 
 	if (!private->mutex_node) {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index ecc00ca3221d..256a3ff2e66e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -29,9 +29,9 @@ struct drm_property;
 struct regmap;
 
 struct mtk_mmsys_driver_data {
-	const enum mtk_ddp_comp_id *main_path;
+	enum mtk_ddp_comp_id *main_path;
 	unsigned int main_len;
-	const enum mtk_ddp_comp_id *ext_path;
+	enum mtk_ddp_comp_id *ext_path;
 	unsigned int ext_len;
 	const enum mtk_ddp_comp_id *third_path;
 	unsigned int third_len;
-- 
2.12.5.2.gbdf23ab


^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 12/12] drm/mediatek: config component output by device node port
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel, linux-mediatek
  Cc: Yingjoe Chen, Cawa Cheng, Daniel Kurtz, Bibby Hsieh,
	Philipp Zabel, YT Shen, Thierry Reding, CK Hu, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer

We can select output component by decive node port.
Main path default output component is DSI.
External path default output component is DPI.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 37 ++++++++++++++++++++++++++++++----
 drivers/gpu/drm/mediatek/mtk_drm_drv.h |  4 ++--
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index d961112fa2f5..a477fb878c06 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -21,7 +21,9 @@
 #include <drm/drm_of.h>
 #include <linux/component.h>
 #include <linux/iommu.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_graph.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
 
@@ -133,7 +135,7 @@ static const struct drm_mode_config_funcs mtk_drm_mode_config_funcs = {
 	.atomic_commit = mtk_atomic_commit,
 };
 
-static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
+static enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
 	DDP_COMPONENT_OVL0,
 	DDP_COMPONENT_RDMA0,
 	DDP_COMPONENT_COLOR0,
@@ -141,7 +143,7 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
 	DDP_COMPONENT_DSI0,
 };
 
-static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
+static enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
 	DDP_COMPONENT_RDMA1,
 	DDP_COMPONENT_DPI0,
 };
@@ -172,7 +174,7 @@ static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = {
 	DDP_COMPONENT_PWM2,
 };
 
-static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
+static enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
 	DDP_COMPONENT_OVL0,
 	DDP_COMPONENT_COLOR0,
 	DDP_COMPONENT_AAL0,
@@ -183,7 +185,7 @@ static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
 	DDP_COMPONENT_PWM0,
 };
 
-static const enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
+static enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
 	DDP_COMPONENT_OVL1,
 	DDP_COMPONENT_COLOR1,
 	DDP_COMPONENT_GAMMA,
@@ -472,6 +474,7 @@ static int mtk_drm_probe(struct platform_device *pdev)
 
 	/* Iterate over sibling DISP function blocks */
 	for_each_child_of_node(dev->of_node->parent, node) {
+		struct device_node *port, *ep, *remote;
 		const struct of_device_id *of_id;
 		enum mtk_ddp_comp_type comp_type;
 		int comp_id;
@@ -531,6 +534,32 @@ static int mtk_drm_probe(struct platform_device *pdev)
 
 			private->ddp_comp[comp_id] = comp;
 		}
+
+		if (comp_type != MTK_DSI && comp_type != MTK_DPI) {
+			port = of_graph_get_port_by_id(node, 0);
+			if (!port)
+				continue;
+			ep = of_get_child_by_name(port, "endpoint");
+			of_node_put(port);
+			if (!ep)
+				continue;
+			remote = of_graph_get_remote_port_parent(ep);
+			of_node_put(ep);
+			if (!remote)
+				continue;
+			of_id = of_match_node(mtk_ddp_comp_dt_ids, remote);
+			if (!of_id)
+				continue;
+			comp_type = (enum mtk_ddp_comp_type)of_id->data;
+			for (i = 0; i < private->data->main_len - 1; i++)
+				if (private->data->main_path[i] == comp_id)
+					private->data->main_path[i + 1] =
+					mtk_ddp_comp_get_id(node, comp_type);
+			for (i = 0; i < private->data->ext_len - 1; i++)
+				if (private->data->ext_path[i] == comp_id)
+					private->data->ext_path[i + 1] =
+					mtk_ddp_comp_get_id(node, comp_type);
+		}
 	}
 
 	if (!private->mutex_node) {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index ecc00ca3221d..256a3ff2e66e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -29,9 +29,9 @@ struct drm_property;
 struct regmap;
 
 struct mtk_mmsys_driver_data {
-	const enum mtk_ddp_comp_id *main_path;
+	enum mtk_ddp_comp_id *main_path;
 	unsigned int main_len;
-	const enum mtk_ddp_comp_id *ext_path;
+	enum mtk_ddp_comp_id *ext_path;
 	unsigned int ext_len;
 	const enum mtk_ddp_comp_id *third_path;
 	unsigned int third_len;
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 12/12] drm/mediatek: config component output by device node port
@ 2018-09-21  3:28   ` Bibby Hsieh
  0 siblings, 0 replies; 57+ messages in thread
From: Bibby Hsieh @ 2018-09-21  3:28 UTC (permalink / raw)
  To: linux-arm-kernel

We can select output component by decive node port.
Main path default output component is DSI.
External path default output component is DPI.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_drm_drv.c | 37 ++++++++++++++++++++++++++++++----
 drivers/gpu/drm/mediatek/mtk_drm_drv.h |  4 ++--
 2 files changed, 35 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
index d961112fa2f5..a477fb878c06 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
@@ -21,7 +21,9 @@
 #include <drm/drm_of.h>
 #include <linux/component.h>
 #include <linux/iommu.h>
+#include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_graph.h>
 #include <linux/of_platform.h>
 #include <linux/pm_runtime.h>
 
@@ -133,7 +135,7 @@ static const struct drm_mode_config_funcs mtk_drm_mode_config_funcs = {
 	.atomic_commit = mtk_atomic_commit,
 };
 
-static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
+static enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
 	DDP_COMPONENT_OVL0,
 	DDP_COMPONENT_RDMA0,
 	DDP_COMPONENT_COLOR0,
@@ -141,7 +143,7 @@ static const enum mtk_ddp_comp_id mt2701_mtk_ddp_main[] = {
 	DDP_COMPONENT_DSI0,
 };
 
-static const enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
+static enum mtk_ddp_comp_id mt2701_mtk_ddp_ext[] = {
 	DDP_COMPONENT_RDMA1,
 	DDP_COMPONENT_DPI0,
 };
@@ -172,7 +174,7 @@ static const enum mtk_ddp_comp_id mt2712_mtk_ddp_third[] = {
 	DDP_COMPONENT_PWM2,
 };
 
-static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
+static enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
 	DDP_COMPONENT_OVL0,
 	DDP_COMPONENT_COLOR0,
 	DDP_COMPONENT_AAL0,
@@ -183,7 +185,7 @@ static const enum mtk_ddp_comp_id mt8173_mtk_ddp_main[] = {
 	DDP_COMPONENT_PWM0,
 };
 
-static const enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
+static enum mtk_ddp_comp_id mt8173_mtk_ddp_ext[] = {
 	DDP_COMPONENT_OVL1,
 	DDP_COMPONENT_COLOR1,
 	DDP_COMPONENT_GAMMA,
@@ -472,6 +474,7 @@ static int mtk_drm_probe(struct platform_device *pdev)
 
 	/* Iterate over sibling DISP function blocks */
 	for_each_child_of_node(dev->of_node->parent, node) {
+		struct device_node *port, *ep, *remote;
 		const struct of_device_id *of_id;
 		enum mtk_ddp_comp_type comp_type;
 		int comp_id;
@@ -531,6 +534,32 @@ static int mtk_drm_probe(struct platform_device *pdev)
 
 			private->ddp_comp[comp_id] = comp;
 		}
+
+		if (comp_type != MTK_DSI && comp_type != MTK_DPI) {
+			port = of_graph_get_port_by_id(node, 0);
+			if (!port)
+				continue;
+			ep = of_get_child_by_name(port, "endpoint");
+			of_node_put(port);
+			if (!ep)
+				continue;
+			remote = of_graph_get_remote_port_parent(ep);
+			of_node_put(ep);
+			if (!remote)
+				continue;
+			of_id = of_match_node(mtk_ddp_comp_dt_ids, remote);
+			if (!of_id)
+				continue;
+			comp_type = (enum mtk_ddp_comp_type)of_id->data;
+			for (i = 0; i < private->data->main_len - 1; i++)
+				if (private->data->main_path[i] == comp_id)
+					private->data->main_path[i + 1] =
+					mtk_ddp_comp_get_id(node, comp_type);
+			for (i = 0; i < private->data->ext_len - 1; i++)
+				if (private->data->ext_path[i] == comp_id)
+					private->data->ext_path[i + 1] =
+					mtk_ddp_comp_get_id(node, comp_type);
+		}
 	}
 
 	if (!private->mutex_node) {
diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.h b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
index ecc00ca3221d..256a3ff2e66e 100644
--- a/drivers/gpu/drm/mediatek/mtk_drm_drv.h
+++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.h
@@ -29,9 +29,9 @@ struct drm_property;
 struct regmap;
 
 struct mtk_mmsys_driver_data {
-	const enum mtk_ddp_comp_id *main_path;
+	enum mtk_ddp_comp_id *main_path;
 	unsigned int main_len;
-	const enum mtk_ddp_comp_id *ext_path;
+	enum mtk_ddp_comp_id *ext_path;
 	unsigned int ext_len;
 	const enum mtk_ddp_comp_id *third_path;
 	unsigned int third_len;
-- 
2.12.5.2.gbdf23ab

^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
  2018-09-21  3:28   ` Bibby Hsieh
  (?)
@ 2018-09-21  6:18     ` CK Hu
  -1 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  6:18 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> After the kernel 4.4, the DRM disable flow was changed, if DPI was
> disableed before CRTC, it will cause warning message as following:
> 
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
> vblank wait timed out on crtc 0
> Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
> CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
> Hardware name: Mediatek Cortex-A7 (Device Tree)
> Workqueue: events drm_mode_rmfb_work_fn
> [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
> [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
> [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
> [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
> [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
> [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
> [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
> [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
> [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
> [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
> [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
> [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
> [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
> [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
> [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
> [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
> [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
> [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
> [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
> ---[ end trace 12ae5358e992abd5 ]---
> 
> so, we add refcount for DPI power on/off to protect the flow.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 6c0ea39d5739..d9373e67d328 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -77,6 +77,7 @@ struct mtk_dpi {
>  	enum mtk_dpi_out_bit_num bit_num;
>  	enum mtk_dpi_out_channel_swap channel_swap;
>  	bool power_sta;
> +	int refcount;
>  	u8 power_ctl;
>  };
>  
> @@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
>  
>  static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  {
> +	if (WARN_ON(dpi->refcount == 0))
> +		return;
> +
> +	if (--dpi->refcount != 0)
> +		return;
> +
>  	dpi->power_ctl &= ~pctl;
>  
>  	if ((dpi->power_ctl & DPI_POWER_START) ||
> @@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  {
>  	int ret;
>  
> +	if (++dpi->refcount != 1)
> +		return 0;
> +
>  	dpi->power_ctl |= pctl;
>  
>  	if (!(dpi->power_ctl & DPI_POWER_START) &&
>  	    !(dpi->power_ctl & DPI_POWER_ENABLE))
> -		return 0;
> +		goto err_refcount;
>  
>  	if (dpi->power_sta)
> -		return 0;
> +		goto err_refcount;

I think dpi->power_ctl and dpi->power_sta is something like reference
count. mtk_dpi_start() and mtk_dpi_stop() is called by crtc. If the
error message happen without this patch, I think there is a bug in
dpi->power_ctl and dpi->power_sta. I think you should fix the bug of
dpi->power_ctl and dpi->power_sta, or just replace it with your
reference count mechanism.

Regards,
CK

>  
>  	ret = clk_prepare_enable(dpi->engine_clk);
>  	if (ret) {
> @@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  	clk_disable_unprepare(dpi->engine_clk);
>  err_eng:
>  	dpi->power_ctl &= ~pctl;
> +err_refcount:
> +	dpi->refcount--;
>  	return ret;
>  }
>  



^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
@ 2018-09-21  6:18     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  6:18 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: linux-kernel, Sascha Hauer, chunhui dai, David Airlie,
	Daniel Vetter, Cawa Cheng, dri-devel, Mao Huang, Thierry Reding,
	linux-mediatek, Matthias Brugger, Yingjoe Chen, linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> After the kernel 4.4, the DRM disable flow was changed, if DPI was
> disableed before CRTC, it will cause warning message as following:
> 
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
> vblank wait timed out on crtc 0
> Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
> CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
> Hardware name: Mediatek Cortex-A7 (Device Tree)
> Workqueue: events drm_mode_rmfb_work_fn
> [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
> [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
> [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
> [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
> [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
> [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
> [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
> [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
> [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
> [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
> [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
> [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
> [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
> [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
> [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
> [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
> [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
> [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
> [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
> ---[ end trace 12ae5358e992abd5 ]---
> 
> so, we add refcount for DPI power on/off to protect the flow.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 6c0ea39d5739..d9373e67d328 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -77,6 +77,7 @@ struct mtk_dpi {
>  	enum mtk_dpi_out_bit_num bit_num;
>  	enum mtk_dpi_out_channel_swap channel_swap;
>  	bool power_sta;
> +	int refcount;
>  	u8 power_ctl;
>  };
>  
> @@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
>  
>  static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  {
> +	if (WARN_ON(dpi->refcount == 0))
> +		return;
> +
> +	if (--dpi->refcount != 0)
> +		return;
> +
>  	dpi->power_ctl &= ~pctl;
>  
>  	if ((dpi->power_ctl & DPI_POWER_START) ||
> @@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  {
>  	int ret;
>  
> +	if (++dpi->refcount != 1)
> +		return 0;
> +
>  	dpi->power_ctl |= pctl;
>  
>  	if (!(dpi->power_ctl & DPI_POWER_START) &&
>  	    !(dpi->power_ctl & DPI_POWER_ENABLE))
> -		return 0;
> +		goto err_refcount;
>  
>  	if (dpi->power_sta)
> -		return 0;
> +		goto err_refcount;

I think dpi->power_ctl and dpi->power_sta is something like reference
count. mtk_dpi_start() and mtk_dpi_stop() is called by crtc. If the
error message happen without this patch, I think there is a bug in
dpi->power_ctl and dpi->power_sta. I think you should fix the bug of
dpi->power_ctl and dpi->power_sta, or just replace it with your
reference count mechanism.

Regards,
CK

>  
>  	ret = clk_prepare_enable(dpi->engine_clk);
>  	if (ret) {
> @@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  	clk_disable_unprepare(dpi->engine_clk);
>  err_eng:
>  	dpi->power_ctl &= ~pctl;
> +err_refcount:
> +	dpi->refcount--;
>  	return ret;
>  }
>  


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
@ 2018-09-21  6:18     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  6:18 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> After the kernel 4.4, the DRM disable flow was changed, if DPI was
> disableed before CRTC, it will cause warning message as following:
> 
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
> vblank wait timed out on crtc 0
> Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
> CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
> Hardware name: Mediatek Cortex-A7 (Device Tree)
> Workqueue: events drm_mode_rmfb_work_fn
> [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
> [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
> [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
> [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
> [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
> [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
> [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
> [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
> [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
> [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
> [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
> [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
> [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
> [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
> [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
> [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
> [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
> [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
> [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
> ---[ end trace 12ae5358e992abd5 ]---
> 
> so, we add refcount for DPI power on/off to protect the flow.
> 
> Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
>  1 file changed, 14 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 6c0ea39d5739..d9373e67d328 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -77,6 +77,7 @@ struct mtk_dpi {
>  	enum mtk_dpi_out_bit_num bit_num;
>  	enum mtk_dpi_out_channel_swap channel_swap;
>  	bool power_sta;
> +	int refcount;
>  	u8 power_ctl;
>  };
>  
> @@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
>  
>  static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  {
> +	if (WARN_ON(dpi->refcount == 0))
> +		return;
> +
> +	if (--dpi->refcount != 0)
> +		return;
> +
>  	dpi->power_ctl &= ~pctl;
>  
>  	if ((dpi->power_ctl & DPI_POWER_START) ||
> @@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  {
>  	int ret;
>  
> +	if (++dpi->refcount != 1)
> +		return 0;
> +
>  	dpi->power_ctl |= pctl;
>  
>  	if (!(dpi->power_ctl & DPI_POWER_START) &&
>  	    !(dpi->power_ctl & DPI_POWER_ENABLE))
> -		return 0;
> +		goto err_refcount;
>  
>  	if (dpi->power_sta)
> -		return 0;
> +		goto err_refcount;

I think dpi->power_ctl and dpi->power_sta is something like reference
count. mtk_dpi_start() and mtk_dpi_stop() is called by crtc. If the
error message happen without this patch, I think there is a bug in
dpi->power_ctl and dpi->power_sta. I think you should fix the bug of
dpi->power_ctl and dpi->power_sta, or just replace it with your
reference count mechanism.

Regards,
CK

>  
>  	ret = clk_prepare_enable(dpi->engine_clk);
>  	if (ret) {
> @@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
>  	clk_disable_unprepare(dpi->engine_clk);
>  err_eng:
>  	dpi->power_ctl &= ~pctl;
> +err_refcount:
> +	dpi->refcount--;
>  	return ret;
>  }
>  

^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 02/12] drm/mediatek: move hardware register to node data
  2018-09-21  3:28   ` Bibby Hsieh
  (?)
@ 2018-09-21  7:39     ` CK Hu
  -1 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  7:39 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> The address of register DPI_H_FRE_CON is different in different IC.
> Using of_node data to find this address.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
>  drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
>  2 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index d9373e67d328..74a32833bde1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -18,6 +18,7 @@
>  #include <linux/component.h>
>  #include <linux/platform_device.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/of_graph.h>
>  #include <linux/interrupt.h>
>  #include <linux/types.h>
> @@ -72,6 +73,7 @@ struct mtk_dpi {
>  	struct clk *tvd_clk;
>  	int irq;
>  	struct drm_display_mode mode;
> +	const struct mtk_dpi_conf *conf;
>  	enum mtk_dpi_out_color_format color_format;
>  	enum mtk_dpi_out_yc_map yc_map;
>  	enum mtk_dpi_out_bit_num bit_num;
> @@ -117,6 +119,10 @@ struct mtk_dpi_yc_limit {
>  	u16 c_bottom;
>  };
>  
> +struct mtk_dpi_conf {
> +	u32 reg_h_fre_con;
> +};
> +
>  static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
>  {
>  	u32 tmp = readl(dpi->regs + offset) & ~mask;
> @@ -342,7 +348,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
>  
>  static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
>  {
> -	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
> +	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
>  }
>  
>  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> @@ -668,6 +674,10 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static const struct mtk_dpi_conf mt8173_conf = {
> +	.reg_h_fre_con = 0xe0,
> +};
> +
>  static int mtk_dpi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -682,6 +692,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	dpi->dev = dev;
> +	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
>  
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	dpi->regs = devm_ioremap_resource(dev, mem);
> @@ -761,8 +772,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_dpi_of_ids[] = {
> -	{ .compatible = "mediatek,mt8173-dpi", },
> -	{}
> +	{ .compatible = "mediatek,mt8173-dpi",
> +	  .data = &mt8173_conf,
> +	},
> +	{ },
>  };
>  
>  struct platform_driver mtk_dpi_driver = {
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 4b6ad4751a31..040444d7718d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -223,6 +223,5 @@
>  #define ESAV_CODE2			(0xFFF << 0)
>  #define ESAV_CODE3_MSB			BIT(16)
>  
> -#define DPI_H_FRE_CON		0xE0
>  #define H_FRE_2N			BIT(25)
>  #endif /* __MTK_DPI_REGS_H */



^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 02/12] drm/mediatek: move hardware register to node data
@ 2018-09-21  7:39     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  7:39 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: linux-kernel, Sascha Hauer, chunhui dai, David Airlie,
	Daniel Vetter, Cawa Cheng, dri-devel, Mao Huang, Thierry Reding,
	linux-mediatek, Matthias Brugger, Yingjoe Chen, linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> The address of register DPI_H_FRE_CON is different in different IC.
> Using of_node data to find this address.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
>  drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
>  2 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index d9373e67d328..74a32833bde1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -18,6 +18,7 @@
>  #include <linux/component.h>
>  #include <linux/platform_device.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/of_graph.h>
>  #include <linux/interrupt.h>
>  #include <linux/types.h>
> @@ -72,6 +73,7 @@ struct mtk_dpi {
>  	struct clk *tvd_clk;
>  	int irq;
>  	struct drm_display_mode mode;
> +	const struct mtk_dpi_conf *conf;
>  	enum mtk_dpi_out_color_format color_format;
>  	enum mtk_dpi_out_yc_map yc_map;
>  	enum mtk_dpi_out_bit_num bit_num;
> @@ -117,6 +119,10 @@ struct mtk_dpi_yc_limit {
>  	u16 c_bottom;
>  };
>  
> +struct mtk_dpi_conf {
> +	u32 reg_h_fre_con;
> +};
> +
>  static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
>  {
>  	u32 tmp = readl(dpi->regs + offset) & ~mask;
> @@ -342,7 +348,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
>  
>  static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
>  {
> -	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
> +	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
>  }
>  
>  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> @@ -668,6 +674,10 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static const struct mtk_dpi_conf mt8173_conf = {
> +	.reg_h_fre_con = 0xe0,
> +};
> +
>  static int mtk_dpi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -682,6 +692,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	dpi->dev = dev;
> +	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
>  
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	dpi->regs = devm_ioremap_resource(dev, mem);
> @@ -761,8 +772,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_dpi_of_ids[] = {
> -	{ .compatible = "mediatek,mt8173-dpi", },
> -	{}
> +	{ .compatible = "mediatek,mt8173-dpi",
> +	  .data = &mt8173_conf,
> +	},
> +	{ },
>  };
>  
>  struct platform_driver mtk_dpi_driver = {
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 4b6ad4751a31..040444d7718d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -223,6 +223,5 @@
>  #define ESAV_CODE2			(0xFFF << 0)
>  #define ESAV_CODE3_MSB			BIT(16)
>  
> -#define DPI_H_FRE_CON		0xE0
>  #define H_FRE_2N			BIT(25)
>  #endif /* __MTK_DPI_REGS_H */


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 02/12] drm/mediatek: move hardware register to node data
@ 2018-09-21  7:39     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  7:39 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> The address of register DPI_H_FRE_CON is different in different IC.
> Using of_node data to find this address.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c      | 19 ++++++++++++++++---
>  drivers/gpu/drm/mediatek/mtk_dpi_regs.h |  1 -
>  2 files changed, 16 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index d9373e67d328..74a32833bde1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -18,6 +18,7 @@
>  #include <linux/component.h>
>  #include <linux/platform_device.h>
>  #include <linux/of.h>
> +#include <linux/of_device.h>
>  #include <linux/of_graph.h>
>  #include <linux/interrupt.h>
>  #include <linux/types.h>
> @@ -72,6 +73,7 @@ struct mtk_dpi {
>  	struct clk *tvd_clk;
>  	int irq;
>  	struct drm_display_mode mode;
> +	const struct mtk_dpi_conf *conf;
>  	enum mtk_dpi_out_color_format color_format;
>  	enum mtk_dpi_out_yc_map yc_map;
>  	enum mtk_dpi_out_bit_num bit_num;
> @@ -117,6 +119,10 @@ struct mtk_dpi_yc_limit {
>  	u16 c_bottom;
>  };
>  
> +struct mtk_dpi_conf {
> +	u32 reg_h_fre_con;
> +};
> +
>  static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
>  {
>  	u32 tmp = readl(dpi->regs + offset) & ~mask;
> @@ -342,7 +348,7 @@ static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
>  
>  static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
>  {
> -	mtk_dpi_mask(dpi, DPI_H_FRE_CON, H_FRE_2N, H_FRE_2N);
> +	mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
>  }
>  
>  static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
> @@ -668,6 +674,10 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static const struct mtk_dpi_conf mt8173_conf = {
> +	.reg_h_fre_con = 0xe0,
> +};
> +
>  static int mtk_dpi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -682,6 +692,7 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  		return -ENOMEM;
>  
>  	dpi->dev = dev;
> +	dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
>  
>  	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>  	dpi->regs = devm_ioremap_resource(dev, mem);
> @@ -761,8 +772,10 @@ static int mtk_dpi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_dpi_of_ids[] = {
> -	{ .compatible = "mediatek,mt8173-dpi", },
> -	{}
> +	{ .compatible = "mediatek,mt8173-dpi",
> +	  .data = &mt8173_conf,
> +	},
> +	{ },
>  };
>  
>  struct platform_driver mtk_dpi_driver = {
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 4b6ad4751a31..040444d7718d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -223,6 +223,5 @@
>  #define ESAV_CODE2			(0xFFF << 0)
>  #define ESAV_CODE3_MSB			BIT(16)
>  
> -#define DPI_H_FRE_CON		0xE0
>  #define H_FRE_2N			BIT(25)
>  #endif /* __MTK_DPI_REGS_H */

^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 04/12] drm/mediatek: add clock factor for different IC
  2018-09-21  3:28   ` Bibby Hsieh
  (?)
@ 2018-09-21  9:03     ` CK Hu
  -1 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:03 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> different IC has different clock designed in HDMI, the factor for
> calculate clock should be different. Usinng the data in of_node
> to find this factor.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
>  1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 1e7369e0d91c..022ccec49cea 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
>  };
>  
>  struct mtk_dpi_conf {
> +	unsigned int (*cal_factor)(int clock);
>  	u32 reg_h_fre_con;
>  	bool edge_sel_en;
>  };
> @@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>  	unsigned int factor;
>  
>  	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
> -
> -	if (mode->clock <= 27000)
> -		factor = 3 << 4;
> -	else if (mode->clock <= 84000)
> -		factor = 3 << 3;
> -	else if (mode->clock <= 167000)
> -		factor = 3 << 2;
> -	else
> -		factor = 3 << 1;
> +	factor = dpi->conf->cal_factor(mode->clock);
>  	drm_display_mode_to_videomode(mode, &vm);
>  	pll_rate = vm.pixelclock * factor;
>  
> @@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static unsigned int mt8173_calculate_factor(int clock)
> +{
> +	if (clock <= 27000)
> +		return 3 << 4;
> +	else if (clock <= 84000)
> +		return 3 << 3;
> +	else if (clock <= 167000)
> +		return 3 << 2;
> +	else
> +		return 3 << 1;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
> +	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>  



^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 04/12] drm/mediatek: add clock factor for different IC
@ 2018-09-21  9:03     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:03 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: linux-kernel, Sascha Hauer, chunhui dai, David Airlie,
	Daniel Vetter, Cawa Cheng, dri-devel, Mao Huang, Thierry Reding,
	linux-mediatek, Matthias Brugger, Yingjoe Chen, linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> different IC has different clock designed in HDMI, the factor for
> calculate clock should be different. Usinng the data in of_node
> to find this factor.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
>  1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 1e7369e0d91c..022ccec49cea 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
>  };
>  
>  struct mtk_dpi_conf {
> +	unsigned int (*cal_factor)(int clock);
>  	u32 reg_h_fre_con;
>  	bool edge_sel_en;
>  };
> @@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>  	unsigned int factor;
>  
>  	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
> -
> -	if (mode->clock <= 27000)
> -		factor = 3 << 4;
> -	else if (mode->clock <= 84000)
> -		factor = 3 << 3;
> -	else if (mode->clock <= 167000)
> -		factor = 3 << 2;
> -	else
> -		factor = 3 << 1;
> +	factor = dpi->conf->cal_factor(mode->clock);
>  	drm_display_mode_to_videomode(mode, &vm);
>  	pll_rate = vm.pixelclock * factor;
>  
> @@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static unsigned int mt8173_calculate_factor(int clock)
> +{
> +	if (clock <= 27000)
> +		return 3 << 4;
> +	else if (clock <= 84000)
> +		return 3 << 3;
> +	else if (clock <= 167000)
> +		return 3 << 2;
> +	else
> +		return 3 << 1;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
> +	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>  


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 04/12] drm/mediatek: add clock factor for different IC
@ 2018-09-21  9:03     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:03 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> different IC has different clock designed in HDMI, the factor for
> calculate clock should be different. Usinng the data in of_node
> to find this factor.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 24 +++++++++++++++---------
>  1 file changed, 15 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 1e7369e0d91c..022ccec49cea 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -120,6 +120,7 @@ struct mtk_dpi_yc_limit {
>  };
>  
>  struct mtk_dpi_conf {
> +	unsigned int (*cal_factor)(int clock);
>  	u32 reg_h_fre_con;
>  	bool edge_sel_en;
>  };
> @@ -460,15 +461,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>  	unsigned int factor;
>  
>  	/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
> -
> -	if (mode->clock <= 27000)
> -		factor = 3 << 4;
> -	else if (mode->clock <= 84000)
> -		factor = 3 << 3;
> -	else if (mode->clock <= 167000)
> -		factor = 3 << 2;
> -	else
> -		factor = 3 << 1;
> +	factor = dpi->conf->cal_factor(mode->clock);
>  	drm_display_mode_to_videomode(mode, &vm);
>  	pll_rate = vm.pixelclock * factor;
>  
> @@ -682,7 +675,20 @@ static const struct component_ops mtk_dpi_component_ops = {
>  	.unbind = mtk_dpi_unbind,
>  };
>  
> +static unsigned int mt8173_calculate_factor(int clock)
> +{
> +	if (clock <= 27000)
> +		return 3 << 4;
> +	else if (clock <= 84000)
> +		return 3 << 3;
> +	else if (clock <= 167000)
> +		return 3 << 2;
> +	else
> +		return 3 << 1;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
> +	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>  

^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
  2018-09-21  3:28   ` Bibby Hsieh
  (?)
@ 2018-09-21  9:47     ` CK Hu
  -1 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:47 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> Convert dpi driver to use drm_of_find_panel_or_bridge.
> This changes some error messages to debug messages (in the graph core).
> Graph connections are often "no connects" depending on the particular
> board, so we want to avoid spurious messages. Plus the kernel is not a
> DT validator.
> related links:
> [1] https://lkml.org/lkml/2017/2/3/716
> [2] https://lkml.org/lkml/2017/2/3/719
> 
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++----------
>  1 file changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 022ccec49cea..7a4868a0afec 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -14,6 +14,7 @@
>  #include <drm/drmP.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
> +#include <drm/drm_of.h>
>  #include <linux/kernel.h>
>  #include <linux/component.h>
>  #include <linux/platform_device.h>
> @@ -697,7 +698,6 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct mtk_dpi *dpi;
>  	struct resource *mem;
> -	struct device_node *bridge_node;
>  	int comp_id;
>  	int ret;
>  
> @@ -743,16 +743,14 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> -	bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
> -	if (!bridge_node)
> -		return -ENODEV;
> -
> -	dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
> -
> -	dpi->bridge = of_drm_find_bridge(bridge_node);
> -	of_node_put(bridge_node);
> -	if (!dpi->bridge)
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> +					  NULL, &dpi->bridge);
> +	if (ret) {
> +		dev_err(dev, "Failed to find panel or bridge: %d\n", ret);
>  		return -EPROBE_DEFER;

I've traced into drm_of_find_panel_or_bridge(), it may return -ENODEV
when device tree has error, why do you treat this error to
-EPROBE_DEFER? I think you may modify this as

if (ret)
	return ret;

Regards,
CK

> +	}
> +
> +	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
>  
>  	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>  	if (comp_id < 0) {



^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
@ 2018-09-21  9:47     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:47 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: linux-kernel, Sascha Hauer, chunhui dai, David Airlie,
	Daniel Vetter, Cawa Cheng, dri-devel, Mao Huang, Thierry Reding,
	linux-mediatek, Matthias Brugger, Yingjoe Chen, linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> Convert dpi driver to use drm_of_find_panel_or_bridge.
> This changes some error messages to debug messages (in the graph core).
> Graph connections are often "no connects" depending on the particular
> board, so we want to avoid spurious messages. Plus the kernel is not a
> DT validator.
> related links:
> [1] https://lkml.org/lkml/2017/2/3/716
> [2] https://lkml.org/lkml/2017/2/3/719
> 
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++----------
>  1 file changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 022ccec49cea..7a4868a0afec 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -14,6 +14,7 @@
>  #include <drm/drmP.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
> +#include <drm/drm_of.h>
>  #include <linux/kernel.h>
>  #include <linux/component.h>
>  #include <linux/platform_device.h>
> @@ -697,7 +698,6 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct mtk_dpi *dpi;
>  	struct resource *mem;
> -	struct device_node *bridge_node;
>  	int comp_id;
>  	int ret;
>  
> @@ -743,16 +743,14 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> -	bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
> -	if (!bridge_node)
> -		return -ENODEV;
> -
> -	dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
> -
> -	dpi->bridge = of_drm_find_bridge(bridge_node);
> -	of_node_put(bridge_node);
> -	if (!dpi->bridge)
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> +					  NULL, &dpi->bridge);
> +	if (ret) {
> +		dev_err(dev, "Failed to find panel or bridge: %d\n", ret);
>  		return -EPROBE_DEFER;

I've traced into drm_of_find_panel_or_bridge(), it may return -ENODEV
when device tree has error, why do you treat this error to
-EPROBE_DEFER? I think you may modify this as

if (ret)
	return ret;

Regards,
CK

> +	}
> +
> +	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
>  
>  	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>  	if (comp_id < 0) {


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge
@ 2018-09-21  9:47     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:47 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> Convert dpi driver to use drm_of_find_panel_or_bridge.
> This changes some error messages to debug messages (in the graph core).
> Graph connections are often "no connects" depending on the particular
> board, so we want to avoid spurious messages. Plus the kernel is not a
> DT validator.
> related links:
> [1] https://lkml.org/lkml/2017/2/3/716
> [2] https://lkml.org/lkml/2017/2/3/719
> 
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c | 18 ++++++++----------
>  1 file changed, 8 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 022ccec49cea..7a4868a0afec 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -14,6 +14,7 @@
>  #include <drm/drmP.h>
>  #include <drm/drm_crtc.h>
>  #include <drm/drm_crtc_helper.h>
> +#include <drm/drm_of.h>
>  #include <linux/kernel.h>
>  #include <linux/component.h>
>  #include <linux/platform_device.h>
> @@ -697,7 +698,6 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct mtk_dpi *dpi;
>  	struct resource *mem;
> -	struct device_node *bridge_node;
>  	int comp_id;
>  	int ret;
>  
> @@ -743,16 +743,14 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> -	bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
> -	if (!bridge_node)
> -		return -ENODEV;
> -
> -	dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
> -
> -	dpi->bridge = of_drm_find_bridge(bridge_node);
> -	of_node_put(bridge_node);
> -	if (!dpi->bridge)
> +	ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0,
> +					  NULL, &dpi->bridge);
> +	if (ret) {
> +		dev_err(dev, "Failed to find panel or bridge: %d\n", ret);
>  		return -EPROBE_DEFER;

I've traced into drm_of_find_panel_or_bridge(), it may return -ENODEV
when device tree has error, why do you treat this error to
-EPROBE_DEFER? I think you may modify this as

if (ret)
	return ret;

Regards,
CK

> +	}
> +
> +	dev_info(dev, "Found bridge node: %pOF\n", dpi->bridge->of_node);
>  
>  	comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
>  	if (comp_id < 0) {

^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623
  2018-09-21  3:28   ` Bibby Hsieh
  (?)
@ 2018-09-21  9:50     ` CK Hu
  -1 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:50 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> This patch adds dpi dirver suppot for both mt2701 and mt7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7a4868a0afec..a9d8231a0a9e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -688,11 +688,29 @@ static unsigned int mt8173_calculate_factor(int clock)
>  		return 3 << 1;
>  }
>  
> +static unsigned int mt2701_calculate_factor(int clock)
> +{
> +	if (clock <= 64000)
> +		return 16;
> +	else if (clock <= 128000)
> +		return 8;
> +	else if (clock <= 256000)
> +		return 4;
> +	else
> +		return 2;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
>  	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>  
> +static const struct mtk_dpi_conf mt2701_conf = {
> +	.cal_factor = mt2701_calculate_factor,
> +	.reg_h_fre_con = 0xb0,
> +	.edge_sel_en = true,
> +};
> +
>  static int mtk_dpi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -784,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_dpi_of_ids[] = {
> +	{ .compatible = "mediatek,mt2701-dpi",
> +	  .data = &mt2701_conf,
> +	},
>  	{ .compatible = "mediatek,mt8173-dpi",
>  	  .data = &mt8173_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 39721119713b..d961112fa2f5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
>  	  .data = (void *)MTK_DSI },
>  	{ .compatible = "mediatek,mt8173-dsi",
>  	  .data = (void *)MTK_DSI },
> +	{ .compatible = "mediatek,mt2701-dpi",
> +	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt8173-dpi",
>  	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt2701-disp-mutex",



^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623
@ 2018-09-21  9:50     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:50 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> This patch adds dpi dirver suppot for both mt2701 and mt7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7a4868a0afec..a9d8231a0a9e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -688,11 +688,29 @@ static unsigned int mt8173_calculate_factor(int clock)
>  		return 3 << 1;
>  }
>  
> +static unsigned int mt2701_calculate_factor(int clock)
> +{
> +	if (clock <= 64000)
> +		return 16;
> +	else if (clock <= 128000)
> +		return 8;
> +	else if (clock <= 256000)
> +		return 4;
> +	else
> +		return 2;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
>  	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>  
> +static const struct mtk_dpi_conf mt2701_conf = {
> +	.cal_factor = mt2701_calculate_factor,
> +	.reg_h_fre_con = 0xb0,
> +	.edge_sel_en = true,
> +};
> +
>  static int mtk_dpi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -784,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_dpi_of_ids[] = {
> +	{ .compatible = "mediatek,mt2701-dpi",
> +	  .data = &mt2701_conf,
> +	},
>  	{ .compatible = "mediatek,mt8173-dpi",
>  	  .data = &mt8173_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 39721119713b..d961112fa2f5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
>  	  .data = (void *)MTK_DSI },
>  	{ .compatible = "mediatek,mt8173-dsi",
>  	  .data = (void *)MTK_DSI },
> +	{ .compatible = "mediatek,mt2701-dpi",
> +	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt8173-dpi",
>  	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt2701-disp-mutex",

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623
@ 2018-09-21  9:50     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21  9:50 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> This patch adds dpi dirver suppot for both mt2701 and mt7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
> 

Reviewed-by: CK Hu <ck.hu@mediatek.com>

> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/mtk_dpi.c     | 21 +++++++++++++++++++++
>  drivers/gpu/drm/mediatek/mtk_drm_drv.c |  2 ++
>  2 files changed, 23 insertions(+)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 7a4868a0afec..a9d8231a0a9e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -688,11 +688,29 @@ static unsigned int mt8173_calculate_factor(int clock)
>  		return 3 << 1;
>  }
>  
> +static unsigned int mt2701_calculate_factor(int clock)
> +{
> +	if (clock <= 64000)
> +		return 16;
> +	else if (clock <= 128000)
> +		return 8;
> +	else if (clock <= 256000)
> +		return 4;
> +	else
> +		return 2;
> +}
> +
>  static const struct mtk_dpi_conf mt8173_conf = {
>  	.cal_factor = mt8173_calculate_factor,
>  	.reg_h_fre_con = 0xe0,
>  };
>  
> +static const struct mtk_dpi_conf mt2701_conf = {
> +	.cal_factor = mt2701_calculate_factor,
> +	.reg_h_fre_con = 0xb0,
> +	.edge_sel_en = true,
> +};
> +
>  static int mtk_dpi_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -784,6 +802,9 @@ static int mtk_dpi_remove(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_dpi_of_ids[] = {
> +	{ .compatible = "mediatek,mt2701-dpi",
> +	  .data = &mt2701_conf,
> +	},
>  	{ .compatible = "mediatek,mt8173-dpi",
>  	  .data = &mt8173_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 39721119713b..d961112fa2f5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -424,6 +424,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
>  	  .data = (void *)MTK_DSI },
>  	{ .compatible = "mediatek,mt8173-dsi",
>  	  .data = (void *)MTK_DSI },
> +	{ .compatible = "mediatek,mt2701-dpi",
> +	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt8173-dpi",
>  	  .data = (void *)MTK_DPI },
>  	{ .compatible = "mediatek,mt2701-disp-mutex",

^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623
  2018-09-21  3:28   ` Bibby Hsieh
  (?)
@ 2018-09-21 10:10     ` CK Hu
  -1 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21 10:10 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: David Airlie, Matthias Brugger, Daniel Vetter, dri-devel,
	linux-mediatek, Yingjoe Chen, Cawa Cheng, Daniel Kurtz,
	Philipp Zabel, YT Shen, Thierry Reding, Mao Huang,
	linux-arm-kernel, linux-kernel, Sascha Hauer, chunhui dai

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> This patch adds hdmi dirver suppot for both MT2701 and MT7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
> 
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/Makefile              |   3 +-
>  drivers/gpu/drm/mediatek/mtk_hdmi.c            |   9 +-
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |   3 +
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |   2 +
>  drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
>  5 files changed, 248 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> 
> diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
> index 61cf0d2ab28a..82ae49c64221 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -19,7 +19,8 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
>  mediatek-drm-hdmi-objs := mtk_cec.o \
>  			  mtk_hdmi.o \
>  			  mtk_hdmi_ddc.o \
> +                          mtk_mt2701_hdmi_phy.o \
>  			  mtk_mt8173_hdmi_phy.o \
>  			  mtk_hdmi_phy.o
>  
> -obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> \ No newline at end of file
> +obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index d62e685cec73..11e3644da79a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -241,8 +241,13 @@ static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
>  	 * The ARM trusted firmware provides an API for the HDMI driver to set
>  	 * this control bit to enable HDMI output in supervisor mode.
>  	 */
> -	arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000,
> -		      0, 0, 0, 0, 0, &res);
> +	if (hdmi_phy->conf && hdmi_phy->conf->tz_disabled)
> +		regmap_update_bits(hdmi->sys_regmap,
> +				   hdmi->sys_offset + HDMI_SYS_CFG20,
> +				   0x80008005, enable ? 0x80000005 : 0x8000);
> +	else
> +		arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904,
> +			      0x80000000, 0, 0, 0, 0, 0, &res);
>  
>  	regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20,
>  			   HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0);
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> index d2dc50db1feb..52d314deacdc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> @@ -192,6 +192,9 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_hdmi_phy_match[] = {
> +	{ .compatible = "mediatek,mt2701-hdmi-phy",
> +	  .data = &mtk_hdmi_phy_2701_conf,
> +	},
>  	{ .compatible = "mediatek,mt8173-hdmi-phy",
>  	  .data = &mtk_hdmi_phy_8173_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> index e346fe319621..a6577c8fdf83 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> @@ -20,6 +20,7 @@
>  struct mtk_hdmi_phy;
>  
>  struct mtk_hdmi_phy_conf {
> +	bool tz_disabled;
>  	const struct clk_ops *hdmi_phy_clk_ops;
>  	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
>  	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
> @@ -50,5 +51,6 @@ struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
>  
>  extern struct platform_driver mtk_hdmi_phy_driver;
>  extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
> +extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf;
>  
>  #endif /* _MTK_HDMI_PHY_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> new file mode 100644
> index 000000000000..41f5dcc24c4e
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> @@ -0,0 +1,234 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Chunhui Dai <chunhui.dai@mediatek.com>
> + */
> +
> +#include "mtk_hdmi_phy.h"
> +
> +#define HDMI_CON0	0x00
> +#define RG_HDMITX_DRV_IBIAS		0
> +#define RG_HDMITX_DRV_IBIAS_MASK	(0x3f << 0)
> +#define RG_HDMITX_EN_SER		12
> +#define RG_HDMITX_EN_SER_MASK		(0x0f << 12)
> +#define RG_HDMITX_EN_SLDO		16
> +#define RG_HDMITX_EN_SLDO_MASK		(0x0f << 16)
> +#define RG_HDMITX_EN_PRED		20
> +#define RG_HDMITX_EN_PRED_MASK		(0x0f << 20)
> +#define RG_HDMITX_EN_IMP		24
> +#define RG_HDMITX_EN_IMP_MASK		(0x0f << 24)
> +#define RG_HDMITX_EN_DRV		28
> +#define RG_HDMITX_EN_DRV_MASK		(0x0f << 28)
> +
> +#define HDMI_CON1	0x04
> +#define RG_HDMITX_PRED_IBIAS		18
> +#define RG_HDMITX_PRED_IBIAS_MASK	(0x0f << 18)
> +#define RG_HDMITX_PRED_IMP		(0x01 << 22)
> +#define RG_HDMITX_DRV_IMP		26
> +#define RG_HDMITX_DRV_IMP_MASK		(0x3f << 26)
> +
> +#define HDMI_CON2	0x08
> +#define RG_HDMITX_EN_TX_CKLDO		(0x01 << 0)
> +#define RG_HDMITX_EN_TX_POSDIV		(0x01 << 1)
> +#define RG_HDMITX_TX_POSDIV		3
> +#define RG_HDMITX_TX_POSDIV_MASK	(0x03 << 3)
> +#define RG_HDMITX_EN_MBIAS		(0x01 << 6)
> +#define RG_HDMITX_MBIAS_LPF_EN		(0x01 << 7)
> +
> +#define HDMI_CON4	0x10
> +#define RG_HDMITX_RESERVE_MASK		(0xffffffff << 0)
> +
> +#define HDMI_CON6	0x18
> +#define RG_HTPLL_BR			0
> +#define RG_HTPLL_BR_MASK		(0x03 << 0)
> +#define RG_HTPLL_BC			2
> +#define RG_HTPLL_BC_MASK		(0x03 << 2)
> +#define RG_HTPLL_BP			4
> +#define RG_HTPLL_BP_MASK		(0x0f << 4)
> +#define RG_HTPLL_IR			8
> +#define RG_HTPLL_IR_MASK		(0x0f << 8)
> +#define RG_HTPLL_IC			12
> +#define RG_HTPLL_IC_MASK		(0x0f << 12)
> +#define RG_HTPLL_POSDIV			16
> +#define RG_HTPLL_POSDIV_MASK		(0x03 << 16)
> +#define RG_HTPLL_PREDIV			18
> +#define RG_HTPLL_PREDIV_MASK		(0x03 << 18)
> +#define RG_HTPLL_FBKSEL			20
> +#define RG_HTPLL_FBKSEL_MASK		(0x03 << 20)
> +#define RG_HTPLL_RLH_EN			(0x01 << 22)
> +#define RG_HTPLL_FBKDIV			24
> +#define RG_HTPLL_FBKDIV_MASK		(0x7f << 24)
> +#define RG_HTPLL_EN			(0x01 << 31)
> +
> +#define HDMI_CON7	0x1c
> +#define RG_HTPLL_AUTOK_EN		(0x01 << 23)
> +#define RG_HTPLL_DIVEN			28
> +#define RG_HTPLL_DIVEN_MASK		(0x07 << 28)
> +
> +static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	usleep_range(80, 100);
> +	return 0;
> +}
> +
> +static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	usleep_range(80, 100);
> +}
> +
> +static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> +				 unsigned long parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +	u32 pos_div;
> +
> +	if (rate <= 64000000)
> +		pos_div = 3;
> +	else if (rate <= 12800000)
> +		pos_div = 1;
> +	else
> +		pos_div = 1;
> +
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
> +			  RG_HTPLL_IC_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
> +			  RG_HTPLL_IR_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON2, (pos_div << RG_HDMITX_TX_POSDIV),
> +			  RG_HDMITX_TX_POSDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (1 << RG_HTPLL_FBKSEL),
> +			  RG_HTPLL_FBKSEL_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (19 << RG_HTPLL_FBKDIV),
> +			  RG_HTPLL_FBKDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON7, (0x2 << RG_HTPLL_DIVEN),
> +			  RG_HTPLL_DIVEN_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0xc << RG_HTPLL_BP),
> +			  RG_HTPLL_BP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x2 << RG_HTPLL_BC),
> +			  RG_HTPLL_BC_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_BR),
> +			  RG_HTPLL_BR_MASK);
> +
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON1, RG_HDMITX_PRED_IMP);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x3 << RG_HDMITX_PRED_IBIAS),
> +			  RG_HDMITX_PRED_IBIAS_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_IMP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x28 << RG_HDMITX_DRV_IMP),
> +			  RG_HDMITX_DRV_IMP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, 0x28, RG_HDMITX_RESERVE_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON0, (0xa << RG_HDMITX_DRV_IBIAS),
> +			  RG_HDMITX_DRV_IBIAS_MASK);
> +	return 0;
> +}
> +
> +static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> +				    unsigned long *parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	hdmi_phy->pll_rate = rate;
> +	if (rate <= 74250000)
> +		*parent_rate = rate;
> +	else
> +		*parent_rate = rate / 2;
> +
> +	return rate;
> +}

This function is identical to the one in mtk_mt8173_hdmi_phy.c, so try
to merge these two identical function into one.

> +
> +static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
> +					      unsigned long parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	return hdmi_phy->pll_rate;
> +}

Ditto.

Regards,
CK

> +
> +static const struct clk_ops mtk_hdmi_phy_pll_ops = {
> +	.prepare = mtk_hdmi_pll_prepare,
> +	.unprepare = mtk_hdmi_pll_unprepare,
> +	.set_rate = mtk_hdmi_pll_set_rate,
> +	.round_rate = mtk_hdmi_pll_round_rate,
> +	.recalc_rate = mtk_hdmi_pll_recalc_rate,
> +};
> +
> +static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
> +{
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	usleep_range(80, 100);
> +}
> +
> +static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
> +{
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	usleep_range(80, 100);
> +}
> +
> +struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
> +	.tz_disabled = true,
> +	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
> +	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
> +	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
> +};
> +
> +MODULE_AUTHOR("Chunhui Dai <chunhui.dai@mediatek.com>");
> +MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
> +MODULE_LICENSE("GPL v2");



^ permalink raw reply	[flat|nested] 57+ messages in thread

* Re: [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623
@ 2018-09-21 10:10     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21 10:10 UTC (permalink / raw)
  To: Bibby Hsieh
  Cc: linux-kernel, Sascha Hauer, chunhui dai, David Airlie,
	Daniel Vetter, Cawa Cheng, dri-devel, Mao Huang, Thierry Reding,
	linux-mediatek, Matthias Brugger, Yingjoe Chen, linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> This patch adds hdmi dirver suppot for both MT2701 and MT7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
> 
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/Makefile              |   3 +-
>  drivers/gpu/drm/mediatek/mtk_hdmi.c            |   9 +-
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |   3 +
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |   2 +
>  drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
>  5 files changed, 248 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> 
> diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
> index 61cf0d2ab28a..82ae49c64221 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -19,7 +19,8 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
>  mediatek-drm-hdmi-objs := mtk_cec.o \
>  			  mtk_hdmi.o \
>  			  mtk_hdmi_ddc.o \
> +                          mtk_mt2701_hdmi_phy.o \
>  			  mtk_mt8173_hdmi_phy.o \
>  			  mtk_hdmi_phy.o
>  
> -obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> \ No newline at end of file
> +obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index d62e685cec73..11e3644da79a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -241,8 +241,13 @@ static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
>  	 * The ARM trusted firmware provides an API for the HDMI driver to set
>  	 * this control bit to enable HDMI output in supervisor mode.
>  	 */
> -	arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000,
> -		      0, 0, 0, 0, 0, &res);
> +	if (hdmi_phy->conf && hdmi_phy->conf->tz_disabled)
> +		regmap_update_bits(hdmi->sys_regmap,
> +				   hdmi->sys_offset + HDMI_SYS_CFG20,
> +				   0x80008005, enable ? 0x80000005 : 0x8000);
> +	else
> +		arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904,
> +			      0x80000000, 0, 0, 0, 0, 0, &res);
>  
>  	regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20,
>  			   HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0);
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> index d2dc50db1feb..52d314deacdc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> @@ -192,6 +192,9 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_hdmi_phy_match[] = {
> +	{ .compatible = "mediatek,mt2701-hdmi-phy",
> +	  .data = &mtk_hdmi_phy_2701_conf,
> +	},
>  	{ .compatible = "mediatek,mt8173-hdmi-phy",
>  	  .data = &mtk_hdmi_phy_8173_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> index e346fe319621..a6577c8fdf83 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> @@ -20,6 +20,7 @@
>  struct mtk_hdmi_phy;
>  
>  struct mtk_hdmi_phy_conf {
> +	bool tz_disabled;
>  	const struct clk_ops *hdmi_phy_clk_ops;
>  	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
>  	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
> @@ -50,5 +51,6 @@ struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
>  
>  extern struct platform_driver mtk_hdmi_phy_driver;
>  extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
> +extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf;
>  
>  #endif /* _MTK_HDMI_PHY_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> new file mode 100644
> index 000000000000..41f5dcc24c4e
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> @@ -0,0 +1,234 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Chunhui Dai <chunhui.dai@mediatek.com>
> + */
> +
> +#include "mtk_hdmi_phy.h"
> +
> +#define HDMI_CON0	0x00
> +#define RG_HDMITX_DRV_IBIAS		0
> +#define RG_HDMITX_DRV_IBIAS_MASK	(0x3f << 0)
> +#define RG_HDMITX_EN_SER		12
> +#define RG_HDMITX_EN_SER_MASK		(0x0f << 12)
> +#define RG_HDMITX_EN_SLDO		16
> +#define RG_HDMITX_EN_SLDO_MASK		(0x0f << 16)
> +#define RG_HDMITX_EN_PRED		20
> +#define RG_HDMITX_EN_PRED_MASK		(0x0f << 20)
> +#define RG_HDMITX_EN_IMP		24
> +#define RG_HDMITX_EN_IMP_MASK		(0x0f << 24)
> +#define RG_HDMITX_EN_DRV		28
> +#define RG_HDMITX_EN_DRV_MASK		(0x0f << 28)
> +
> +#define HDMI_CON1	0x04
> +#define RG_HDMITX_PRED_IBIAS		18
> +#define RG_HDMITX_PRED_IBIAS_MASK	(0x0f << 18)
> +#define RG_HDMITX_PRED_IMP		(0x01 << 22)
> +#define RG_HDMITX_DRV_IMP		26
> +#define RG_HDMITX_DRV_IMP_MASK		(0x3f << 26)
> +
> +#define HDMI_CON2	0x08
> +#define RG_HDMITX_EN_TX_CKLDO		(0x01 << 0)
> +#define RG_HDMITX_EN_TX_POSDIV		(0x01 << 1)
> +#define RG_HDMITX_TX_POSDIV		3
> +#define RG_HDMITX_TX_POSDIV_MASK	(0x03 << 3)
> +#define RG_HDMITX_EN_MBIAS		(0x01 << 6)
> +#define RG_HDMITX_MBIAS_LPF_EN		(0x01 << 7)
> +
> +#define HDMI_CON4	0x10
> +#define RG_HDMITX_RESERVE_MASK		(0xffffffff << 0)
> +
> +#define HDMI_CON6	0x18
> +#define RG_HTPLL_BR			0
> +#define RG_HTPLL_BR_MASK		(0x03 << 0)
> +#define RG_HTPLL_BC			2
> +#define RG_HTPLL_BC_MASK		(0x03 << 2)
> +#define RG_HTPLL_BP			4
> +#define RG_HTPLL_BP_MASK		(0x0f << 4)
> +#define RG_HTPLL_IR			8
> +#define RG_HTPLL_IR_MASK		(0x0f << 8)
> +#define RG_HTPLL_IC			12
> +#define RG_HTPLL_IC_MASK		(0x0f << 12)
> +#define RG_HTPLL_POSDIV			16
> +#define RG_HTPLL_POSDIV_MASK		(0x03 << 16)
> +#define RG_HTPLL_PREDIV			18
> +#define RG_HTPLL_PREDIV_MASK		(0x03 << 18)
> +#define RG_HTPLL_FBKSEL			20
> +#define RG_HTPLL_FBKSEL_MASK		(0x03 << 20)
> +#define RG_HTPLL_RLH_EN			(0x01 << 22)
> +#define RG_HTPLL_FBKDIV			24
> +#define RG_HTPLL_FBKDIV_MASK		(0x7f << 24)
> +#define RG_HTPLL_EN			(0x01 << 31)
> +
> +#define HDMI_CON7	0x1c
> +#define RG_HTPLL_AUTOK_EN		(0x01 << 23)
> +#define RG_HTPLL_DIVEN			28
> +#define RG_HTPLL_DIVEN_MASK		(0x07 << 28)
> +
> +static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	usleep_range(80, 100);
> +	return 0;
> +}
> +
> +static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	usleep_range(80, 100);
> +}
> +
> +static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> +				 unsigned long parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +	u32 pos_div;
> +
> +	if (rate <= 64000000)
> +		pos_div = 3;
> +	else if (rate <= 12800000)
> +		pos_div = 1;
> +	else
> +		pos_div = 1;
> +
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
> +			  RG_HTPLL_IC_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
> +			  RG_HTPLL_IR_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON2, (pos_div << RG_HDMITX_TX_POSDIV),
> +			  RG_HDMITX_TX_POSDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (1 << RG_HTPLL_FBKSEL),
> +			  RG_HTPLL_FBKSEL_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (19 << RG_HTPLL_FBKDIV),
> +			  RG_HTPLL_FBKDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON7, (0x2 << RG_HTPLL_DIVEN),
> +			  RG_HTPLL_DIVEN_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0xc << RG_HTPLL_BP),
> +			  RG_HTPLL_BP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x2 << RG_HTPLL_BC),
> +			  RG_HTPLL_BC_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_BR),
> +			  RG_HTPLL_BR_MASK);
> +
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON1, RG_HDMITX_PRED_IMP);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x3 << RG_HDMITX_PRED_IBIAS),
> +			  RG_HDMITX_PRED_IBIAS_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_IMP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x28 << RG_HDMITX_DRV_IMP),
> +			  RG_HDMITX_DRV_IMP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, 0x28, RG_HDMITX_RESERVE_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON0, (0xa << RG_HDMITX_DRV_IBIAS),
> +			  RG_HDMITX_DRV_IBIAS_MASK);
> +	return 0;
> +}
> +
> +static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> +				    unsigned long *parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	hdmi_phy->pll_rate = rate;
> +	if (rate <= 74250000)
> +		*parent_rate = rate;
> +	else
> +		*parent_rate = rate / 2;
> +
> +	return rate;
> +}

This function is identical to the one in mtk_mt8173_hdmi_phy.c, so try
to merge these two identical function into one.

> +
> +static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
> +					      unsigned long parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	return hdmi_phy->pll_rate;
> +}

Ditto.

Regards,
CK

> +
> +static const struct clk_ops mtk_hdmi_phy_pll_ops = {
> +	.prepare = mtk_hdmi_pll_prepare,
> +	.unprepare = mtk_hdmi_pll_unprepare,
> +	.set_rate = mtk_hdmi_pll_set_rate,
> +	.round_rate = mtk_hdmi_pll_round_rate,
> +	.recalc_rate = mtk_hdmi_pll_recalc_rate,
> +};
> +
> +static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
> +{
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	usleep_range(80, 100);
> +}
> +
> +static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
> +{
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	usleep_range(80, 100);
> +}
> +
> +struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
> +	.tz_disabled = true,
> +	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
> +	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
> +	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
> +};
> +
> +MODULE_AUTHOR("Chunhui Dai <chunhui.dai@mediatek.com>");
> +MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
> +MODULE_LICENSE("GPL v2");


_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 57+ messages in thread

* [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623
@ 2018-09-21 10:10     ` CK Hu
  0 siblings, 0 replies; 57+ messages in thread
From: CK Hu @ 2018-09-21 10:10 UTC (permalink / raw)
  To: linux-arm-kernel

Hi, Bibby:

On Fri, 2018-09-21 at 11:28 +0800, Bibby Hsieh wrote:
> From: chunhui dai <chunhui.dai@mediatek.com>
> 
> This patch adds hdmi dirver suppot for both MT2701 and MT7623.
> And also support other (existing or future) chips that use
> the same binding and driver.
> 
> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
> ---
>  drivers/gpu/drm/mediatek/Makefile              |   3 +-
>  drivers/gpu/drm/mediatek/mtk_hdmi.c            |   9 +-
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.c        |   3 +
>  drivers/gpu/drm/mediatek/mtk_hdmi_phy.h        |   2 +
>  drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c | 234 +++++++++++++++++++++++++
>  5 files changed, 248 insertions(+), 3 deletions(-)
>  create mode 100644 drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> 
> diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
> index 61cf0d2ab28a..82ae49c64221 100644
> --- a/drivers/gpu/drm/mediatek/Makefile
> +++ b/drivers/gpu/drm/mediatek/Makefile
> @@ -19,7 +19,8 @@ obj-$(CONFIG_DRM_MEDIATEK) += mediatek-drm.o
>  mediatek-drm-hdmi-objs := mtk_cec.o \
>  			  mtk_hdmi.o \
>  			  mtk_hdmi_ddc.o \
> +                          mtk_mt2701_hdmi_phy.o \
>  			  mtk_mt8173_hdmi_phy.o \
>  			  mtk_hdmi_phy.o
>  
> -obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> \ No newline at end of file
> +obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi.c b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> index d62e685cec73..11e3644da79a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi.c
> @@ -241,8 +241,13 @@ static void mtk_hdmi_hw_make_reg_writable(struct mtk_hdmi *hdmi, bool enable)
>  	 * The ARM trusted firmware provides an API for the HDMI driver to set
>  	 * this control bit to enable HDMI output in supervisor mode.
>  	 */
> -	arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904, 0x80000000,
> -		      0, 0, 0, 0, 0, &res);
> +	if (hdmi_phy->conf && hdmi_phy->conf->tz_disabled)
> +		regmap_update_bits(hdmi->sys_regmap,
> +				   hdmi->sys_offset + HDMI_SYS_CFG20,
> +				   0x80008005, enable ? 0x80000005 : 0x8000);
> +	else
> +		arm_smccc_smc(MTK_SIP_SET_AUTHORIZED_SECURE_REG, 0x14000904,
> +			      0x80000000, 0, 0, 0, 0, 0, &res);
>  
>  	regmap_update_bits(hdmi->sys_regmap, hdmi->sys_offset + HDMI_SYS_CFG20,
>  			   HDMI_PCLK_FREE_RUN, enable ? HDMI_PCLK_FREE_RUN : 0);
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> index d2dc50db1feb..52d314deacdc 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.c
> @@ -192,6 +192,9 @@ static int mtk_hdmi_phy_probe(struct platform_device *pdev)
>  }
>  
>  static const struct of_device_id mtk_hdmi_phy_match[] = {
> +	{ .compatible = "mediatek,mt2701-hdmi-phy",
> +	  .data = &mtk_hdmi_phy_2701_conf,
> +	},
>  	{ .compatible = "mediatek,mt8173-hdmi-phy",
>  	  .data = &mtk_hdmi_phy_8173_conf,
>  	},
> diff --git a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> index e346fe319621..a6577c8fdf83 100644
> --- a/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> +++ b/drivers/gpu/drm/mediatek/mtk_hdmi_phy.h
> @@ -20,6 +20,7 @@
>  struct mtk_hdmi_phy;
>  
>  struct mtk_hdmi_phy_conf {
> +	bool tz_disabled;
>  	const struct clk_ops *hdmi_phy_clk_ops;
>  	void (*hdmi_phy_enable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
>  	void (*hdmi_phy_disable_tmds)(struct mtk_hdmi_phy *hdmi_phy);
> @@ -50,5 +51,6 @@ struct mtk_hdmi_phy *to_mtk_hdmi_phy(struct clk_hw *hw);
>  
>  extern struct platform_driver mtk_hdmi_phy_driver;
>  extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_8173_conf;
> +extern struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf;
>  
>  #endif /* _MTK_HDMI_PHY_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> new file mode 100644
> index 000000000000..41f5dcc24c4e
> --- /dev/null
> +++ b/drivers/gpu/drm/mediatek/mtk_mt2701_hdmi_phy.c
> @@ -0,0 +1,234 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + * Author: Chunhui Dai <chunhui.dai@mediatek.com>
> + */
> +
> +#include "mtk_hdmi_phy.h"
> +
> +#define HDMI_CON0	0x00
> +#define RG_HDMITX_DRV_IBIAS		0
> +#define RG_HDMITX_DRV_IBIAS_MASK	(0x3f << 0)
> +#define RG_HDMITX_EN_SER		12
> +#define RG_HDMITX_EN_SER_MASK		(0x0f << 12)
> +#define RG_HDMITX_EN_SLDO		16
> +#define RG_HDMITX_EN_SLDO_MASK		(0x0f << 16)
> +#define RG_HDMITX_EN_PRED		20
> +#define RG_HDMITX_EN_PRED_MASK		(0x0f << 20)
> +#define RG_HDMITX_EN_IMP		24
> +#define RG_HDMITX_EN_IMP_MASK		(0x0f << 24)
> +#define RG_HDMITX_EN_DRV		28
> +#define RG_HDMITX_EN_DRV_MASK		(0x0f << 28)
> +
> +#define HDMI_CON1	0x04
> +#define RG_HDMITX_PRED_IBIAS		18
> +#define RG_HDMITX_PRED_IBIAS_MASK	(0x0f << 18)
> +#define RG_HDMITX_PRED_IMP		(0x01 << 22)
> +#define RG_HDMITX_DRV_IMP		26
> +#define RG_HDMITX_DRV_IMP_MASK		(0x3f << 26)
> +
> +#define HDMI_CON2	0x08
> +#define RG_HDMITX_EN_TX_CKLDO		(0x01 << 0)
> +#define RG_HDMITX_EN_TX_POSDIV		(0x01 << 1)
> +#define RG_HDMITX_TX_POSDIV		3
> +#define RG_HDMITX_TX_POSDIV_MASK	(0x03 << 3)
> +#define RG_HDMITX_EN_MBIAS		(0x01 << 6)
> +#define RG_HDMITX_MBIAS_LPF_EN		(0x01 << 7)
> +
> +#define HDMI_CON4	0x10
> +#define RG_HDMITX_RESERVE_MASK		(0xffffffff << 0)
> +
> +#define HDMI_CON6	0x18
> +#define RG_HTPLL_BR			0
> +#define RG_HTPLL_BR_MASK		(0x03 << 0)
> +#define RG_HTPLL_BC			2
> +#define RG_HTPLL_BC_MASK		(0x03 << 2)
> +#define RG_HTPLL_BP			4
> +#define RG_HTPLL_BP_MASK		(0x0f << 4)
> +#define RG_HTPLL_IR			8
> +#define RG_HTPLL_IR_MASK		(0x0f << 8)
> +#define RG_HTPLL_IC			12
> +#define RG_HTPLL_IC_MASK		(0x0f << 12)
> +#define RG_HTPLL_POSDIV			16
> +#define RG_HTPLL_POSDIV_MASK		(0x03 << 16)
> +#define RG_HTPLL_PREDIV			18
> +#define RG_HTPLL_PREDIV_MASK		(0x03 << 18)
> +#define RG_HTPLL_FBKSEL			20
> +#define RG_HTPLL_FBKSEL_MASK		(0x03 << 20)
> +#define RG_HTPLL_RLH_EN			(0x01 << 22)
> +#define RG_HTPLL_FBKDIV			24
> +#define RG_HTPLL_FBKDIV_MASK		(0x7f << 24)
> +#define RG_HTPLL_EN			(0x01 << 31)
> +
> +#define HDMI_CON7	0x1c
> +#define RG_HTPLL_AUTOK_EN		(0x01 << 23)
> +#define RG_HTPLL_DIVEN			28
> +#define RG_HTPLL_DIVEN_MASK		(0x07 << 28)
> +
> +static int mtk_hdmi_pll_prepare(struct clk_hw *hw)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	usleep_range(80, 100);
> +	return 0;
> +}
> +
> +static void mtk_hdmi_pll_unprepare(struct clk_hw *hw)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	usleep_range(80, 100);
> +}
> +
> +static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate,
> +				 unsigned long parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +	u32 pos_div;
> +
> +	if (rate <= 64000000)
> +		pos_div = 3;
> +	else if (rate <= 12800000)
> +		pos_div = 1;
> +	else
> +		pos_div = 1;
> +
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_PREDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IC),
> +			  RG_HTPLL_IC_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_IR),
> +			  RG_HTPLL_IR_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON2, (pos_div << RG_HDMITX_TX_POSDIV),
> +			  RG_HDMITX_TX_POSDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (1 << RG_HTPLL_FBKSEL),
> +			  RG_HTPLL_FBKSEL_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (19 << RG_HTPLL_FBKDIV),
> +			  RG_HTPLL_FBKDIV_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON7, (0x2 << RG_HTPLL_DIVEN),
> +			  RG_HTPLL_DIVEN_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0xc << RG_HTPLL_BP),
> +			  RG_HTPLL_BP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x2 << RG_HTPLL_BC),
> +			  RG_HTPLL_BC_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, (0x1 << RG_HTPLL_BR),
> +			  RG_HTPLL_BR_MASK);
> +
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON1, RG_HDMITX_PRED_IMP);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x3 << RG_HDMITX_PRED_IBIAS),
> +			  RG_HDMITX_PRED_IBIAS_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_IMP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON1, (0x28 << RG_HDMITX_DRV_IMP),
> +			  RG_HDMITX_DRV_IMP_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, 0x28, RG_HDMITX_RESERVE_MASK);
> +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON0, (0xa << RG_HDMITX_DRV_IBIAS),
> +			  RG_HDMITX_DRV_IBIAS_MASK);
> +	return 0;
> +}
> +
> +static long mtk_hdmi_pll_round_rate(struct clk_hw *hw, unsigned long rate,
> +				    unsigned long *parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	hdmi_phy->pll_rate = rate;
> +	if (rate <= 74250000)
> +		*parent_rate = rate;
> +	else
> +		*parent_rate = rate / 2;
> +
> +	return rate;
> +}

This function is identical to the one in mtk_mt8173_hdmi_phy.c, so try
to merge these two identical function into one.

> +
> +static unsigned long mtk_hdmi_pll_recalc_rate(struct clk_hw *hw,
> +					      unsigned long parent_rate)
> +{
> +	struct mtk_hdmi_phy *hdmi_phy = to_mtk_hdmi_phy(hw);
> +
> +	return hdmi_phy->pll_rate;
> +}

Ditto.

Regards,
CK

> +
> +static const struct clk_ops mtk_hdmi_phy_pll_ops = {
> +	.prepare = mtk_hdmi_pll_prepare,
> +	.unprepare = mtk_hdmi_pll_unprepare,
> +	.set_rate = mtk_hdmi_pll_set_rate,
> +	.round_rate = mtk_hdmi_pll_round_rate,
> +	.recalc_rate = mtk_hdmi_pll_recalc_rate,
> +};
> +
> +static void mtk_hdmi_phy_enable_tmds(struct mtk_hdmi_phy *hdmi_phy)
> +{
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	usleep_range(80, 100);
> +}
> +
> +static void mtk_hdmi_phy_disable_tmds(struct mtk_hdmi_phy *hdmi_phy)
> +{
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_DRV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_PRED_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SER_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_POSDIV);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_MBIAS_LPF_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON0, RG_HDMITX_EN_SLDO_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_TX_CKLDO);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_EN);
> +	usleep_range(80, 100);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON2, RG_HDMITX_EN_MBIAS);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_POSDIV_MASK);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON6, RG_HTPLL_RLH_EN);
> +	mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON7, RG_HTPLL_AUTOK_EN);
> +	usleep_range(80, 100);
> +}
> +
> +struct mtk_hdmi_phy_conf mtk_hdmi_phy_2701_conf = {
> +	.tz_disabled = true,
> +	.hdmi_phy_clk_ops = &mtk_hdmi_phy_pll_ops,
> +	.hdmi_phy_enable_tmds = mtk_hdmi_phy_enable_tmds,
> +	.hdmi_phy_disable_tmds = mtk_hdmi_phy_disable_tmds,
> +};
> +
> +MODULE_AUTHOR("Chunhui Dai <chunhui.dai@mediatek.com>");
> +MODULE_DESCRIPTION("MediaTek HDMI PHY Driver");
> +MODULE_LICENSE("GPL v2");

^ permalink raw reply	[flat|nested] 57+ messages in thread

end of thread, other threads:[~2018-09-21 10:10 UTC | newest]

Thread overview: 57+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-09-21  3:28 [PATCH v3 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-09-21  3:28 ` Bibby Hsieh
2018-09-21  3:28 ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  6:18   ` CK Hu
2018-09-21  6:18     ` CK Hu
2018-09-21  6:18     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 02/12] drm/mediatek: move hardware register to node data Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  7:39   ` CK Hu
2018-09-21  7:39     ` CK Hu
2018-09-21  7:39     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 03/12] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 04/12] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  9:03   ` CK Hu
2018-09-21  9:03     ` CK Hu
2018-09-21  9:03     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  9:47   ` CK Hu
2018-09-21  9:47     ` CK Hu
2018-09-21  9:47     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  9:50   ` CK Hu
2018-09-21  9:50     ` CK Hu
2018-09-21  9:50     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 07/12] drm/mediatek: separate hdmi phy to different file Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 08/12] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21 10:10   ` CK Hu
2018-09-21 10:10     ` CK Hu
2018-09-21 10:10     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 10/12] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 11/12] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 12/12] drm/mediatek: config component output by device node port Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.