All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: David Airlie <airlied@linux.ie>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	<dri-devel@lists.freedesktop.org>,
	<linux-mediatek@lists.infradead.org>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>,
	Cawa Cheng <cawa.cheng@mediatek.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Bibby Hsieh <bibby.hsieh@mediatek.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	YT Shen <yt.shen@mediatek.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	CK Hu <ck.hu@mediatek.com>, Mao Huang <littlecvr@chromium.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Sascha Hauer <kernel@pengutronix.de>,
	chunhui dai <chunhui.dai@mediatek.com>
Subject: [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
Date: Fri, 21 Sep 2018 11:28:11 +0800	[thread overview]
Message-ID: <20180921032822.30771-2-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20180921032822.30771-1-bibby.hsieh@mediatek.com>

From: chunhui dai <chunhui.dai@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 6c0ea39d5739..d9373e67d328 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -77,6 +77,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
+	int refcount;
 	u8 power_ctl;
 };
 
@@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 
 static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
+	if (WARN_ON(dpi->refcount == 0))
+		return;
+
+	if (--dpi->refcount != 0)
+		return;
+
 	dpi->power_ctl &= ~pctl;
 
 	if ((dpi->power_ctl & DPI_POWER_START) ||
@@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
 	int ret;
 
+	if (++dpi->refcount != 1)
+		return 0;
+
 	dpi->power_ctl |= pctl;
 
 	if (!(dpi->power_ctl & DPI_POWER_START) &&
 	    !(dpi->power_ctl & DPI_POWER_ENABLE))
-		return 0;
+		goto err_refcount;
 
 	if (dpi->power_sta)
-		return 0;
+		goto err_refcount;
 
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
@@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	clk_disable_unprepare(dpi->engine_clk);
 err_eng:
 	dpi->power_ctl &= ~pctl;
+err_refcount:
+	dpi->refcount--;
 	return ret;
 }
 
-- 
2.12.5.2.gbdf23ab


WARNING: multiple messages have this Message-ID (diff)
From: Bibby Hsieh <bibby.hsieh@mediatek.com>
To: David Airlie <airlied@linux.ie>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Daniel Vetter <daniel.vetter@ffwll.ch>,
	dri-devel@lists.freedesktop.org,
	linux-mediatek@lists.infradead.org
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>,
	Cawa Cheng <cawa.cheng@mediatek.com>,
	Daniel Kurtz <djkurtz@chromium.org>,
	Bibby Hsieh <bibby.hsieh@mediatek.com>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	YT Shen <yt.shen@mediatek.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	CK Hu <ck.hu@mediatek.com>, Mao Huang <littlecvr@chromium.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Sascha Hauer <kernel@pengutronix.de>,
	chunhui dai <chunhui.dai@mediatek.com>
Subject: [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
Date: Fri, 21 Sep 2018 11:28:11 +0800	[thread overview]
Message-ID: <20180921032822.30771-2-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20180921032822.30771-1-bibby.hsieh@mediatek.com>

From: chunhui dai <chunhui.dai@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 6c0ea39d5739..d9373e67d328 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -77,6 +77,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
+	int refcount;
 	u8 power_ctl;
 };
 
@@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 
 static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
+	if (WARN_ON(dpi->refcount == 0))
+		return;
+
+	if (--dpi->refcount != 0)
+		return;
+
 	dpi->power_ctl &= ~pctl;
 
 	if ((dpi->power_ctl & DPI_POWER_START) ||
@@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
 	int ret;
 
+	if (++dpi->refcount != 1)
+		return 0;
+
 	dpi->power_ctl |= pctl;
 
 	if (!(dpi->power_ctl & DPI_POWER_START) &&
 	    !(dpi->power_ctl & DPI_POWER_ENABLE))
-		return 0;
+		goto err_refcount;
 
 	if (dpi->power_sta)
-		return 0;
+		goto err_refcount;
 
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
@@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	clk_disable_unprepare(dpi->engine_clk);
 err_eng:
 	dpi->power_ctl &= ~pctl;
+err_refcount:
+	dpi->refcount--;
 	return ret;
 }
 
-- 
2.12.5.2.gbdf23ab

WARNING: multiple messages have this Message-ID (diff)
From: bibby.hsieh@mediatek.com (Bibby Hsieh)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off
Date: Fri, 21 Sep 2018 11:28:11 +0800	[thread overview]
Message-ID: <20180921032822.30771-2-bibby.hsieh@mediatek.com> (raw)
In-Reply-To: <20180921032822.30771-1-bibby.hsieh@mediatek.com>

From: chunhui dai <chunhui.dai@mediatek.com>

After the kernel 4.4, the DRM disable flow was changed, if DPI was
disableed before CRTC, it will cause warning message as following:

------------[ cut here ]------------
WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c()
vblank wait timed out on crtc 0
Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O)
CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P        W  O    4.4.24 #1
Hardware name: Mediatek Cortex-A7 (Device Tree)
Workqueue: events drm_mode_rmfb_work_fn
[<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24)
[<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac)
[<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4)
[<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48)
[<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c)
[<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c)
[<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240)
[<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8)
[<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4)
[<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98)
[<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74)
[<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0)
[<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4)
[<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120)
[<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58)
[<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c)
[<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568)
[<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104)
[<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c)
---[ end trace 12ae5358e992abd5 ]---

so, we add refcount for DPI power on/off to protect the flow.

Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
Signed-off-by: chunhui dai <chunhui.dai@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 6c0ea39d5739..d9373e67d328 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -77,6 +77,7 @@ struct mtk_dpi {
 	enum mtk_dpi_out_bit_num bit_num;
 	enum mtk_dpi_out_channel_swap channel_swap;
 	bool power_sta;
+	int refcount;
 	u8 power_ctl;
 };
 
@@ -369,6 +370,12 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 
 static void mtk_dpi_power_off(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
+	if (WARN_ON(dpi->refcount == 0))
+		return;
+
+	if (--dpi->refcount != 0)
+		return;
+
 	dpi->power_ctl &= ~pctl;
 
 	if ((dpi->power_ctl & DPI_POWER_START) ||
@@ -388,14 +395,17 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 {
 	int ret;
 
+	if (++dpi->refcount != 1)
+		return 0;
+
 	dpi->power_ctl |= pctl;
 
 	if (!(dpi->power_ctl & DPI_POWER_START) &&
 	    !(dpi->power_ctl & DPI_POWER_ENABLE))
-		return 0;
+		goto err_refcount;
 
 	if (dpi->power_sta)
-		return 0;
+		goto err_refcount;
 
 	ret = clk_prepare_enable(dpi->engine_clk);
 	if (ret) {
@@ -417,6 +427,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi, enum mtk_dpi_power_ctl pctl)
 	clk_disable_unprepare(dpi->engine_clk);
 err_eng:
 	dpi->power_ctl &= ~pctl;
+err_refcount:
+	dpi->refcount--;
 	return ret;
 }
 
-- 
2.12.5.2.gbdf23ab

  reply	other threads:[~2018-09-21  3:28 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-21  3:28 [PATCH v3 00/13] drm/mediatek: support hdmi output for mt2701 and mt7623 Bibby Hsieh
2018-09-21  3:28 ` Bibby Hsieh
2018-09-21  3:28 ` Bibby Hsieh
2018-09-21  3:28 ` Bibby Hsieh [this message]
2018-09-21  3:28   ` [PATCH v3 01/12] drm/mediatek: add refcount for DPI power on/off Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  6:18   ` CK Hu
2018-09-21  6:18     ` CK Hu
2018-09-21  6:18     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 02/12] drm/mediatek: move hardware register to node data Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  7:39   ` CK Hu
2018-09-21  7:39     ` CK Hu
2018-09-21  7:39     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 03/12] drm/mediatek: adjust EDGE to match clock and data Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 04/12] drm/mediatek: add clock factor for different IC Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  9:03   ` CK Hu
2018-09-21  9:03     ` CK Hu
2018-09-21  9:03     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 05/12] drm/mediatek: convert dpi driver to use drm_of_find_panel_or_bridge Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  9:47   ` CK Hu
2018-09-21  9:47     ` CK Hu
2018-09-21  9:47     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 06/12] drm/mediatek: add dpi driver for mt2701 and mt7623 Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  9:50   ` CK Hu
2018-09-21  9:50     ` CK Hu
2018-09-21  9:50     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 07/12] drm/mediatek: separate hdmi phy to different file Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 08/12] drm/mediatek: add support for SPDIF audio in HDMI Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 09/12] drm/mediatek: add hdmi driver for MT2701 and MT7623 Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21 10:10   ` CK Hu
2018-09-21 10:10     ` CK Hu
2018-09-21 10:10     ` CK Hu
2018-09-21  3:28 ` [PATCH v3 10/12] drm/mediatek: implement connection from BLS to DPI0 Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 11/12] drm/mediatek: add a error return value when clock driver has been prepared Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28 ` [PATCH v3 12/12] drm/mediatek: config component output by device node port Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh
2018-09-21  3:28   ` Bibby Hsieh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180921032822.30771-2-bibby.hsieh@mediatek.com \
    --to=bibby.hsieh@mediatek.com \
    --cc=airlied@linux.ie \
    --cc=cawa.cheng@mediatek.com \
    --cc=chunhui.dai@mediatek.com \
    --cc=ck.hu@mediatek.com \
    --cc=daniel.vetter@ffwll.ch \
    --cc=djkurtz@chromium.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=littlecvr@chromium.org \
    --cc=matthias.bgg@gmail.com \
    --cc=p.zabel@pengutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=yingjoe.chen@mediatek.com \
    --cc=yt.shen@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.