From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Date: Fri, 21 Sep 2018 11:24:12 +0200 Subject: [U-Boot] [PATCH v2 0/7] [RESEND] Improvements for the dwc3_generic driver In-Reply-To: References: <1536068557-23915-1-git-send-email-jjhiblot@ti.com> <20180921105041.392f1d07@jawa> Message-ID: <20180921112412.7fd57015@jawa> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Jean-Jacques, > On 21/09/2018 10:50, Lukasz Majewski wrote: > > Hi Jean-Jacques, > > > >> Hi Marek, > >> > >> I haven't heard of you on this series. > >> > >> It is already a resend and has been tested on 2 platforms (zcu100 > >> and dra7/am57). > >> > >> Can you please consider it for inclusion? > > This is not Marek to blame for the delay - I had some non open > > source tasks to finish (and I do apologise for this situation). > Thanks. I am not blaming anyone. :-) Could you check the build result? https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980 I do see some issues with "Freescale ARM32/ARM64". > I just wanted to make sure that this > wasn't lost in limbo. > > > > > Your patches are now under build testing on travis-CI: > > https://travis-ci.org/lmajewski/u-boot-dfu/builds/431388980 > > > > I will send the PR after CI finish. > > > >> Thanks, > >> > >> JJ > >> > >> > >> > >> On 04/09/2018 15:42, Jean-Jacques Hiblot wrote: > >>> Resending this series after rebasing on top of latest u-boot. > >>> > >>> This series aims at bringing improvements to the dwc3_generic > >>> driver so that it can be used by most of the platforms using the > >>> dwc3 controller. > >>> > >>> I tested this on with DRA7 and AM57x platforms for both Peripheral > >>> and Host operations. The code to enable DM USB host & dev support > >>> for those platforms will be submitted in a separate series. > >>> > >>> Michal Simek has tested this series: > >>> " I have tested it on zcu100 with usb stick, usb to ethernet > >>> converter and also dfu. > >>> Tested-by: Michal Simek " > >>> > >>> Enhancements: > >>> - use separate Kconfig option for DM USB Periphal and DM USB Host. > >>> This allow platforms to keep their non-DM USB peripheral code and > >>> use the DM USB host. > >>> - fixes the bind/probe confusion in dwc3_generic. The probe is > >>> done when the USB device is first needed. > >>> - handles PHYs when in the peripheral mode. The code to handle the > >>> PHYs is shared with the host side > >>> - handles clock and reset > >>> - bind host controller to the more generic driver 'xhci-dwc3' > >>> > >>> > >>> Changes in v2: > >>> - Updated commit log > >>> - Fixed typo in thordown.c > >>> - select DM_USB_DEV by default for zynqmp platforms > >>> > >>> Jean-Jacques Hiblot (7): > >>> usb: gadget: Do not call board_usb_xxx() directly in USB > >>> gadget drivers > >>> usb: introduce a separate config option for DM USB device > >>> usb: udc: implement DM versions of > >>> usb_gadget_initialize()/_release()/_handle_interrupt() > >>> dwc3_generic: do not probe the USB device driver when it's > >>> bound dwc3: move phy operation to core.c > >>> dwc3-generic: Handle the PHYs, the clocks and the reset lines > >>> dwc3-generic: Add select_dr_mode operation > >>> > >>> arch/arm/Kconfig | 2 + > >>> cmd/fastboot.c | 4 +- > >>> cmd/rockusb.c | 4 +- > >>> cmd/thordown.c | 4 +- > >>> cmd/usb_gadget_sdp.c | 4 +- > >>> cmd/usb_mass_storage.c | 4 +- > >>> common/dfu.c | 6 +- > >>> drivers/usb/Kconfig | 6 ++ > >>> drivers/usb/dwc3/Kconfig | 7 +- > >>> drivers/usb/dwc3/core.c | 86 +++++++++++++++- > >>> drivers/usb/dwc3/dwc3-generic.c | 207 > >>> +++++++++++++++++++++++++++++--------- > >>> drivers/usb/dwc3/ep0.c | 1 - > >>> drivers/usb/gadget/ether.c | 38 +------ > >>> drivers/usb/gadget/udc/udc-core.c | 44 +++++++- > >>> drivers/usb/host/xhci-dwc3.c | 93 ++--------------- > >>> include/dwc3-uboot.h | 7 ++ > >>> include/linux/usb/gadget.h | 18 ++++ 17 files changed, 351 > >>> insertions(+), 184 deletions(-) > > > > > > > > Best regards, > > > > Lukasz Majewski > > > > -- > > > > DENX Software Engineering GmbH, Managing Director: Wolfgang > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, > > Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: > > wd at denx.de > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 488 bytes Desc: OpenPGP digital signature URL: