All of lore.kernel.org
 help / color / mirror / Atom feed
From: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
To: David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Richard Weinberger <richard@nod.at>,
	Zhouyang Jia <jiazhouyang09@gmail.com>,
	linux-mtd@lists.infradead.org,
	open list <linux-kernel@vger.kernel.org>
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Subject: [PATCH v4 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
Date: Mon,  1 Oct 2018 14:43:48 +0200	[thread overview]
Message-ID: <20181001124351.31615-5-ricardo.ribalda@gmail.com> (raw)
In-Reply-To: <20181001124351.31615-1-ricardo.ribalda@gmail.com>

By replacing the array with an integer we can avoid completely
the bit comparison loop if the value has not changed (by far
the most common case).

Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
---
 drivers/mtd/maps/gpio-addr-flash.c | 34 +++++++++++++++---------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/mtd/maps/gpio-addr-flash.c b/drivers/mtd/maps/gpio-addr-flash.c
index 89cc8cce161b..47b12a6fead4 100644
--- a/drivers/mtd/maps/gpio-addr-flash.c
+++ b/drivers/mtd/maps/gpio-addr-flash.c
@@ -43,7 +43,7 @@ struct async_state {
 	struct map_info map;
 	size_t gpio_count;
 	unsigned *gpio_addrs;
-	int *gpio_values;
+	unsigned int gpio_values;
 	unsigned int win_order;
 };
 #define gf_map_info_to_state(mi) ((struct async_state *)(mi)->map_priv_1)
@@ -55,22 +55,25 @@ struct async_state {
  *
  * Rather than call the GPIO framework every time, cache the last-programmed
  * value.  This speeds up sequential accesses (which are by far the most common
- * type).  We rely on the GPIO framework to treat non-zero value as high so
- * that we don't have to normalize the bits.
+ * type).
  */
 static void gf_set_gpios(struct async_state *state, unsigned long ofs)
 {
-	size_t i = 0;
-	int value;
+	int i;
 
 	ofs >>= state->win_order;
-	do {
-		value = ofs & (1 << i);
-		if (state->gpio_values[i] != value) {
-			gpio_set_value(state->gpio_addrs[i], value);
-			state->gpio_values[i] = value;
-		}
-	} while (++i < state->gpio_count);
+
+	if (ofs == state->gpio_values)
+		return;
+
+	for (i = 0; i < state->gpio_count; i++) {
+		if ((ofs & BIT(i)) == (state->gpio_values & BIT(i)))
+			continue;
+
+		gpio_set_value(state->gpio_addrs[i], !!(ofs & BIT(i)));
+	}
+
+	state->gpio_values = ofs;
 }
 
 /**
@@ -202,7 +205,7 @@ static const char * const part_probe_types[] = {
  */
 static int gpio_flash_probe(struct platform_device *pdev)
 {
-	size_t i, arr_size;
+	size_t i;
 	struct physmap_flash_data *pdata;
 	struct resource *memory;
 	struct resource *gpios;
@@ -215,8 +218,7 @@ static int gpio_flash_probe(struct platform_device *pdev)
 	if (!memory || !gpios || !gpios->end)
 		return -EINVAL;
 
-	arr_size = sizeof(int) * gpios->end;
-	state = devm_kzalloc(&pdev->dev, sizeof(*state) + arr_size, GFP_KERNEL);
+	state = devm_kzalloc(&pdev->dev, sizeof(*state), GFP_KERNEL);
 	if (!state)
 		return -ENOMEM;
 
@@ -226,9 +228,7 @@ static int gpio_flash_probe(struct platform_device *pdev)
 	 */
 	state->gpio_count     = gpios->end;
 	state->gpio_addrs     = (void *)(unsigned long)gpios->start;
-	state->gpio_values    = (void *)(state + 1);
 	state->win_order      = get_bitmask_order(resource_size(memory)) - 1;
-	memset(state->gpio_values, 0xff, arr_size);
 
 	state->map.name       = DRIVER_NAME;
 	state->map.read       = gf_read;
-- 
2.19.0


  parent reply	other threads:[~2018-10-01 12:44 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-01 12:43 [PATCH v4 1/8] mtd: maps: gpio-addr-flash: Replace custom printk Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 2/8] mtd: maps: gpio-addr-flash: Fix ioremapped size Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 3/8] mtd: maps: gpio-addr-flash: Use devm_* functions Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 4/8] mtd: maps: gpio-addr-flash: Use order insted of size Ricardo Ribalda Delgado
2018-10-01 12:43 ` Ricardo Ribalda Delgado [this message]
2018-10-01 12:43 ` [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod Ricardo Ribalda Delgado
2018-10-03 15:11   ` Boris Brezillon
2018-10-03 15:17     ` Boris Brezillon
2018-10-03 15:56       ` Ricardo Ribalda Delgado
2018-10-03 16:58         ` Boris Brezillon
2018-10-01 12:43 ` [PATCH v4 7/8] dt-binding: mtd: Document gpio-addr-flash Ricardo Ribalda Delgado
2018-10-01 12:43 ` [PATCH v4 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices Ricardo Ribalda Delgado
2018-10-03 17:01   ` Boris Brezillon
2018-10-03 19:34     ` Ricardo Ribalda Delgado

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181001124351.31615-5-ricardo.ribalda@gmail.com \
    --to=ricardo.ribalda@gmail.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=jiazhouyang09@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=marek.vasut@gmail.com \
    --cc=richard@nod.at \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.