All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org, iommu@lists.linux-foundation.org,
	linux-mm@kvack.org, linux-arch@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 16/33] powerpc/powernv: remove dead npu-dma code
Date: Tue,  9 Oct 2018 15:24:43 +0200	[thread overview]
Message-ID: <20181009132500.17643-17-hch@lst.de> (raw)
In-Reply-To: <20181009132500.17643-1-hch@lst.de>

This code has been unused since it was merged and is in the way of
cleaning up the DMA code, thus remove it.

This effectively reverts commit 5d2aa710 ("powerpc/powernv: Add support
for Nvlink NPUs").

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/pci.h            |   3 -
 arch/powerpc/include/asm/powernv.h        |  23 -
 arch/powerpc/platforms/powernv/Makefile   |   2 +-
 arch/powerpc/platforms/powernv/npu-dma.c  | 999 ----------------------
 arch/powerpc/platforms/powernv/pci-ioda.c | 243 ------
 arch/powerpc/platforms/powernv/pci.h      |  11 -
 6 files changed, 1 insertion(+), 1280 deletions(-)
 delete mode 100644 arch/powerpc/platforms/powernv/npu-dma.c

diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 2af9ded80540..a01d2e3d6ff9 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -127,7 +127,4 @@ extern void pcibios_scan_phb(struct pci_controller *hose);
 
 #endif	/* __KERNEL__ */
 
-extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
-extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
-
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/powernv.h b/arch/powerpc/include/asm/powernv.h
index 2f3ff7a27881..4848a6b3c6b2 100644
--- a/arch/powerpc/include/asm/powernv.h
+++ b/arch/powerpc/include/asm/powernv.h
@@ -11,33 +11,10 @@
 #define _ASM_POWERNV_H
 
 #ifdef CONFIG_PPC_POWERNV
-#define NPU2_WRITE 1
 extern void powernv_set_nmmu_ptcr(unsigned long ptcr);
-extern struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
-			unsigned long flags,
-			void (*cb)(struct npu_context *, void *),
-			void *priv);
-extern void pnv_npu2_destroy_context(struct npu_context *context,
-				struct pci_dev *gpdev);
-extern int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
-				unsigned long *flags, unsigned long *status,
-				int count);
-
 void pnv_tm_init(void);
 #else
 static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { }
-static inline struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
-			unsigned long flags,
-			struct npu_context *(*cb)(struct npu_context *, void *),
-			void *priv) { return ERR_PTR(-ENODEV); }
-static inline void pnv_npu2_destroy_context(struct npu_context *context,
-					struct pci_dev *gpdev) { }
-
-static inline int pnv_npu2_handle_fault(struct npu_context *context,
-					uintptr_t *ea, unsigned long *flags,
-					unsigned long *status, int count) {
-	return -ENODEV;
-}
 
 static inline void pnv_tm_init(void) { }
 static inline void pnv_power9_force_smt4(void) { }
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index b540ce8eec55..2b13e9dd137c 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -6,7 +6,7 @@ obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
-obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
+obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o pci-ioda-tce.o
 obj-$(CONFIG_CXL_BASE)	+= pci-cxl.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
deleted file mode 100644
index 8006c54a91e3..000000000000
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ /dev/null
@@ -1,999 +0,0 @@
-/*
- * This file implements the DMA operations for NVLink devices. The NPU
- * devices all point to the same iommu table as the parent PCI device.
- *
- * Copyright Alistair Popple, IBM Corporation 2015.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- */
-
-#include <linux/slab.h>
-#include <linux/mmu_notifier.h>
-#include <linux/mmu_context.h>
-#include <linux/of.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/memblock.h>
-#include <linux/iommu.h>
-#include <linux/debugfs.h>
-
-#include <asm/debugfs.h>
-#include <asm/tlb.h>
-#include <asm/powernv.h>
-#include <asm/reg.h>
-#include <asm/opal.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/pnv-pci.h>
-#include <asm/msi_bitmap.h>
-#include <asm/opal.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-#define npu_to_phb(x) container_of(x, struct pnv_phb, npu)
-
-/*
- * spinlock to protect initialisation of an npu_context for a particular
- * mm_struct.
- */
-static DEFINE_SPINLOCK(npu_context_lock);
-
-/*
- * When an address shootdown range exceeds this threshold we invalidate the
- * entire TLB on the GPU for the given PID rather than each specific address in
- * the range.
- */
-static uint64_t atsd_threshold = 2 * 1024 * 1024;
-static struct dentry *atsd_threshold_dentry;
-
-/*
- * Other types of TCE cache invalidation are not functional in the
- * hardware.
- */
-static struct pci_dev *get_pci_dev(struct device_node *dn)
-{
-	struct pci_dn *pdn = PCI_DN(dn);
-
-	return pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
-					   pdn->busno, pdn->devfn);
-}
-
-/* Given a NPU device get the associated PCI device. */
-struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
-{
-	struct device_node *dn;
-	struct pci_dev *gpdev;
-
-	if (WARN_ON(!npdev))
-		return NULL;
-
-	if (WARN_ON(!npdev->dev.of_node))
-		return NULL;
-
-	/* Get assoicated PCI device */
-	dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
-	if (!dn)
-		return NULL;
-
-	gpdev = get_pci_dev(dn);
-	of_node_put(dn);
-
-	return gpdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_gpu_dev);
-
-/* Given the real PCI device get a linked NPU device. */
-struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
-{
-	struct device_node *dn;
-	struct pci_dev *npdev;
-
-	if (WARN_ON(!gpdev))
-		return NULL;
-
-	/* Not all PCI devices have device-tree nodes */
-	if (!gpdev->dev.of_node)
-		return NULL;
-
-	/* Get assoicated PCI device */
-	dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
-	if (!dn)
-		return NULL;
-
-	npdev = get_pci_dev(dn);
-	of_node_put(dn);
-
-	return npdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_npu_dev);
-
-#define NPU_DMA_OP_UNSUPPORTED()					\
-	dev_err_once(dev, "%s operation unsupported for NVLink devices\n", \
-		__func__)
-
-static void *dma_npu_alloc(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t flag,
-			   unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return NULL;
-}
-
-static void dma_npu_free(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle,
-			 unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-}
-
-static dma_addr_t dma_npu_map_page(struct device *dev, struct page *page,
-				   unsigned long offset, size_t size,
-				   enum dma_data_direction direction,
-				   unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static int dma_npu_map_sg(struct device *dev, struct scatterlist *sglist,
-			  int nelems, enum dma_data_direction direction,
-			  unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static int dma_npu_dma_supported(struct device *dev, u64 mask)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static u64 dma_npu_get_required_mask(struct device *dev)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static const struct dma_map_ops dma_npu_ops = {
-	.map_page		= dma_npu_map_page,
-	.map_sg			= dma_npu_map_sg,
-	.alloc			= dma_npu_alloc,
-	.free			= dma_npu_free,
-	.dma_supported		= dma_npu_dma_supported,
-	.get_required_mask	= dma_npu_get_required_mask,
-};
-
-/*
- * Returns the PE assoicated with the PCI device of the given
- * NPU. Returns the linked pci device if pci_dev != NULL.
- */
-static struct pnv_ioda_pe *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
-						  struct pci_dev **gpdev)
-{
-	struct pnv_phb *phb;
-	struct pci_controller *hose;
-	struct pci_dev *pdev;
-	struct pnv_ioda_pe *pe;
-	struct pci_dn *pdn;
-
-	pdev = pnv_pci_get_gpu_dev(npe->pdev);
-	if (!pdev)
-		return NULL;
-
-	pdn = pci_get_pdn(pdev);
-	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-		return NULL;
-
-	hose = pci_bus_to_host(pdev->bus);
-	phb = hose->private_data;
-	pe = &phb->ioda.pe_array[pdn->pe_number];
-
-	if (gpdev)
-		*gpdev = pdev;
-
-	return pe;
-}
-
-long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
-		struct iommu_table *tbl)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-	const unsigned long size = tbl->it_indirect_levels ?
-		tbl->it_level_size : tbl->it_size;
-	const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
-	const __u64 win_size = tbl->it_size << tbl->it_page_shift;
-
-	pe_info(npe, "Setting up window %llx..%llx pg=%lx\n",
-			start_addr, start_addr + win_size - 1,
-			IOMMU_PAGE_SIZE(tbl));
-
-	rc = opal_pci_map_pe_dma_window(phb->opal_id,
-			npe->pe_number,
-			npe->pe_number,
-			tbl->it_indirect_levels + 1,
-			__pa(tbl->it_base),
-			size << 3,
-			IOMMU_PAGE_SIZE(tbl));
-	if (rc) {
-		pe_err(npe, "Failed to configure TCE table, err %lld\n", rc);
-		return rc;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	/* Add the table to the list so its TCE cache will get invalidated */
-	pnv_pci_link_table_and_group(phb->hose->node, num,
-			tbl, &npe->table_group);
-
-	return 0;
-}
-
-long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-
-	pe_info(npe, "Removing DMA window\n");
-
-	rc = opal_pci_map_pe_dma_window(phb->opal_id, npe->pe_number,
-			npe->pe_number,
-			0/* levels */, 0/* table address */,
-			0/* table size */, 0/* page size */);
-	if (rc) {
-		pe_err(npe, "Unmapping failed, ret = %lld\n", rc);
-		return rc;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	pnv_pci_unlink_table_and_group(npe->table_group.tables[num],
-			&npe->table_group);
-
-	return 0;
-}
-
-/*
- * Enables 32 bit DMA on NPU.
- */
-static void pnv_npu_dma_set_32(struct pnv_ioda_pe *npe)
-{
-	struct pci_dev *gpdev;
-	struct pnv_ioda_pe *gpe;
-	int64_t rc;
-
-	/*
-	 * Find the assoicated PCI devices and get the dma window
-	 * information from there.
-	 */
-	if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
-		return;
-
-	gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
-	if (!gpe)
-		return;
-
-	rc = pnv_npu_set_window(npe, 0, gpe->table_group.tables[0]);
-
-	/*
-	 * We don't initialise npu_pe->tce32_table as we always use
-	 * dma_npu_ops which are nops.
-	 */
-	set_dma_ops(&npe->pdev->dev, &dma_npu_ops);
-}
-
-/*
- * Enables bypass mode on the NPU. The NPU only supports one
- * window per link, so bypass needs to be explicitly enabled or
- * disabled. Unlike for a PHB3 bypass and non-bypass modes can't be
- * active at the same time.
- */
-static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc = 0;
-	phys_addr_t top = memblock_end_of_DRAM();
-
-	if (phb->type != PNV_PHB_NPU_NVLINK || !npe->pdev)
-		return -EINVAL;
-
-	rc = pnv_npu_unset_window(npe, 0);
-	if (rc != OPAL_SUCCESS)
-		return rc;
-
-	/* Enable the bypass window */
-
-	top = roundup_pow_of_two(top);
-	dev_info(&npe->pdev->dev, "Enabling bypass for PE %x\n",
-			npe->pe_number);
-	rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
-			npe->pe_number, npe->pe_number,
-			0 /* bypass base */, top);
-
-	if (rc == OPAL_SUCCESS)
-		pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	return rc;
-}
-
-void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass)
-{
-	int i;
-	struct pnv_phb *phb;
-	struct pci_dn *pdn;
-	struct pnv_ioda_pe *npe;
-	struct pci_dev *npdev;
-
-	for (i = 0; ; ++i) {
-		npdev = pnv_pci_get_npu_dev(gpdev, i);
-
-		if (!npdev)
-			break;
-
-		pdn = pci_get_pdn(npdev);
-		if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-			return;
-
-		phb = pci_bus_to_host(npdev->bus)->private_data;
-
-		/* We only do bypass if it's enabled on the linked device */
-		npe = &phb->ioda.pe_array[pdn->pe_number];
-
-		if (bypass) {
-			dev_info(&npdev->dev,
-					"Using 64-bit DMA iommu bypass\n");
-			pnv_npu_dma_set_bypass(npe);
-		} else {
-			dev_info(&npdev->dev, "Using 32-bit DMA via iommu\n");
-			pnv_npu_dma_set_32(npe);
-		}
-	}
-}
-
-/* Switch ownership from platform code to external user (e.g. VFIO) */
-void pnv_npu_take_ownership(struct pnv_ioda_pe *npe)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-
-	/*
-	 * Note: NPU has just a single TVE in the hardware which means that
-	 * while used by the kernel, it can have either 32bit window or
-	 * DMA bypass but never both. So we deconfigure 32bit window only
-	 * if it was enabled at the moment of ownership change.
-	 */
-	if (npe->table_group.tables[0]) {
-		pnv_npu_unset_window(npe, 0);
-		return;
-	}
-
-	/* Disable bypass */
-	rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
-			npe->pe_number, npe->pe_number,
-			0 /* bypass base */, 0);
-	if (rc) {
-		pe_err(npe, "Failed to disable bypass, err %lld\n", rc);
-		return;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(npe->phb, false);
-}
-
-struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe)
-{
-	struct pnv_phb *phb = npe->phb;
-	struct pci_bus *pbus = phb->hose->bus;
-	struct pci_dev *npdev, *gpdev = NULL, *gptmp;
-	struct pnv_ioda_pe *gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
-
-	if (!gpe || !gpdev)
-		return NULL;
-
-	list_for_each_entry(npdev, &pbus->devices, bus_list) {
-		gptmp = pnv_pci_get_gpu_dev(npdev);
-
-		if (gptmp != gpdev)
-			continue;
-
-		pe_info(gpe, "Attached NPU %s\n", dev_name(&npdev->dev));
-		iommu_group_add_device(gpe->table_group.group, &npdev->dev);
-	}
-
-	return gpe;
-}
-
-/* Maximum number of nvlinks per npu */
-#define NV_MAX_LINKS 6
-
-/* Maximum index of npu2 hosts in the system. Always < NV_MAX_NPUS */
-static int max_npu2_index;
-
-struct npu_context {
-	struct mm_struct *mm;
-	struct pci_dev *npdev[NV_MAX_NPUS][NV_MAX_LINKS];
-	struct mmu_notifier mn;
-	struct kref kref;
-	bool nmmu_flush;
-
-	/* Callback to stop translation requests on a given GPU */
-	void (*release_cb)(struct npu_context *context, void *priv);
-
-	/*
-	 * Private pointer passed to the above callback for usage by
-	 * device drivers.
-	 */
-	void *priv;
-};
-
-struct mmio_atsd_reg {
-	struct npu *npu;
-	int reg;
-};
-
-/*
- * Find a free MMIO ATSD register and mark it in use. Return -ENOSPC
- * if none are available.
- */
-static int get_mmio_atsd_reg(struct npu *npu)
-{
-	int i;
-
-	for (i = 0; i < npu->mmio_atsd_count; i++) {
-		if (!test_bit(i, &npu->mmio_atsd_usage))
-			if (!test_and_set_bit_lock(i, &npu->mmio_atsd_usage))
-				return i;
-	}
-
-	return -ENOSPC;
-}
-
-static void put_mmio_atsd_reg(struct npu *npu, int reg)
-{
-	clear_bit_unlock(reg, &npu->mmio_atsd_usage);
-}
-
-/* MMIO ATSD register offsets */
-#define XTS_ATSD_AVA  1
-#define XTS_ATSD_STAT 2
-
-static void mmio_launch_invalidate(struct mmio_atsd_reg *mmio_atsd_reg,
-				unsigned long launch, unsigned long va)
-{
-	struct npu *npu = mmio_atsd_reg->npu;
-	int reg = mmio_atsd_reg->reg;
-
-	__raw_writeq_be(va, npu->mmio_atsd_regs[reg] + XTS_ATSD_AVA);
-	eieio();
-	__raw_writeq_be(launch, npu->mmio_atsd_regs[reg]);
-}
-
-static void mmio_invalidate_pid(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
-				unsigned long pid, bool flush)
-{
-	int i;
-	unsigned long launch;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		/* IS set to invalidate matching PID */
-		launch = PPC_BIT(12);
-
-		/* PRS set to process-scoped */
-		launch |= PPC_BIT(13);
-
-		/* AP */
-		launch |= (u64)
-			mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
-
-		/* PID */
-		launch |= pid << PPC_BITLSHIFT(38);
-
-		/* No flush */
-		launch |= !flush << PPC_BITLSHIFT(39);
-
-		/* Invalidating the entire process doesn't use a va */
-		mmio_launch_invalidate(&mmio_atsd_reg[i], launch, 0);
-	}
-}
-
-static void mmio_invalidate_va(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
-			unsigned long va, unsigned long pid, bool flush)
-{
-	int i;
-	unsigned long launch;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		/* IS set to invalidate target VA */
-		launch = 0;
-
-		/* PRS set to process scoped */
-		launch |= PPC_BIT(13);
-
-		/* AP */
-		launch |= (u64)
-			mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
-
-		/* PID */
-		launch |= pid << PPC_BITLSHIFT(38);
-
-		/* No flush */
-		launch |= !flush << PPC_BITLSHIFT(39);
-
-		mmio_launch_invalidate(&mmio_atsd_reg[i], launch, va);
-	}
-}
-
-#define mn_to_npu_context(x) container_of(x, struct npu_context, mn)
-
-static void mmio_invalidate_wait(
-	struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
-	struct npu *npu;
-	int i, reg;
-
-	/* Wait for all invalidations to complete */
-	for (i = 0; i <= max_npu2_index; i++) {
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		/* Wait for completion */
-		npu = mmio_atsd_reg[i].npu;
-		reg = mmio_atsd_reg[i].reg;
-		while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT))
-			cpu_relax();
-	}
-}
-
-/*
- * Acquires all the address translation shootdown (ATSD) registers required to
- * launch an ATSD on all links this npu_context is active on.
- */
-static void acquire_atsd_reg(struct npu_context *npu_context,
-			struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
-	int i, j;
-	struct npu *npu;
-	struct pci_dev *npdev;
-	struct pnv_phb *nphb;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		mmio_atsd_reg[i].reg = -1;
-		for (j = 0; j < NV_MAX_LINKS; j++) {
-			/*
-			 * There are no ordering requirements with respect to
-			 * the setup of struct npu_context, but to ensure
-			 * consistent behaviour we need to ensure npdev[][] is
-			 * only read once.
-			 */
-			npdev = READ_ONCE(npu_context->npdev[i][j]);
-			if (!npdev)
-				continue;
-
-			nphb = pci_bus_to_host(npdev->bus)->private_data;
-			npu = &nphb->npu;
-			mmio_atsd_reg[i].npu = npu;
-			mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
-			while (mmio_atsd_reg[i].reg < 0) {
-				mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
-				cpu_relax();
-			}
-			break;
-		}
-	}
-}
-
-/*
- * Release previously acquired ATSD registers. To avoid deadlocks the registers
- * must be released in the same order they were acquired above in
- * acquire_atsd_reg.
- */
-static void release_atsd_reg(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
-	int i;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		/*
-		 * We can't rely on npu_context->npdev[][] being the same here
-		 * as when acquire_atsd_reg() was called, hence we use the
-		 * values stored in mmio_atsd_reg during the acquire phase
-		 * rather than re-reading npdev[][].
-		 */
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		put_mmio_atsd_reg(mmio_atsd_reg[i].npu, mmio_atsd_reg[i].reg);
-	}
-}
-
-/*
- * Invalidate either a single address or an entire PID depending on
- * the value of va.
- */
-static void mmio_invalidate(struct npu_context *npu_context, int va,
-			unsigned long address, bool flush)
-{
-	struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS];
-	unsigned long pid = npu_context->mm->context.id;
-
-	if (npu_context->nmmu_flush)
-		/*
-		 * Unfortunately the nest mmu does not support flushing specific
-		 * addresses so we have to flush the whole mm once before
-		 * shooting down the GPU translation.
-		 */
-		flush_all_mm(npu_context->mm);
-
-	/*
-	 * Loop over all the NPUs this process is active on and launch
-	 * an invalidate.
-	 */
-	acquire_atsd_reg(npu_context, mmio_atsd_reg);
-	if (va)
-		mmio_invalidate_va(mmio_atsd_reg, address, pid, flush);
-	else
-		mmio_invalidate_pid(mmio_atsd_reg, pid, flush);
-
-	mmio_invalidate_wait(mmio_atsd_reg);
-	if (flush) {
-		/*
-		 * The GPU requires two flush ATSDs to ensure all entries have
-		 * been flushed. We use PID 0 as it will never be used for a
-		 * process on the GPU.
-		 */
-		mmio_invalidate_pid(mmio_atsd_reg, 0, true);
-		mmio_invalidate_wait(mmio_atsd_reg);
-		mmio_invalidate_pid(mmio_atsd_reg, 0, true);
-		mmio_invalidate_wait(mmio_atsd_reg);
-	}
-	release_atsd_reg(mmio_atsd_reg);
-}
-
-static void pnv_npu2_mn_release(struct mmu_notifier *mn,
-				struct mm_struct *mm)
-{
-	struct npu_context *npu_context = mn_to_npu_context(mn);
-
-	/* Call into device driver to stop requests to the NMMU */
-	if (npu_context->release_cb)
-		npu_context->release_cb(npu_context, npu_context->priv);
-
-	/*
-	 * There should be no more translation requests for this PID, but we
-	 * need to ensure any entries for it are removed from the TLB.
-	 */
-	mmio_invalidate(npu_context, 0, 0, true);
-}
-
-static void pnv_npu2_mn_change_pte(struct mmu_notifier *mn,
-				struct mm_struct *mm,
-				unsigned long address,
-				pte_t pte)
-{
-	struct npu_context *npu_context = mn_to_npu_context(mn);
-
-	mmio_invalidate(npu_context, 1, address, true);
-}
-
-static void pnv_npu2_mn_invalidate_range(struct mmu_notifier *mn,
-					struct mm_struct *mm,
-					unsigned long start, unsigned long end)
-{
-	struct npu_context *npu_context = mn_to_npu_context(mn);
-	unsigned long address;
-
-	if (end - start > atsd_threshold) {
-		/*
-		 * Just invalidate the entire PID if the address range is too
-		 * large.
-		 */
-		mmio_invalidate(npu_context, 0, 0, true);
-	} else {
-		for (address = start; address < end; address += PAGE_SIZE)
-			mmio_invalidate(npu_context, 1, address, false);
-
-		/* Do the flush only on the final addess == end */
-		mmio_invalidate(npu_context, 1, address, true);
-	}
-}
-
-static const struct mmu_notifier_ops nv_nmmu_notifier_ops = {
-	.release = pnv_npu2_mn_release,
-	.change_pte = pnv_npu2_mn_change_pte,
-	.invalidate_range = pnv_npu2_mn_invalidate_range,
-};
-
-/*
- * Call into OPAL to setup the nmmu context for the current task in
- * the NPU. This must be called to setup the context tables before the
- * GPU issues ATRs. pdev should be a pointed to PCIe GPU device.
- *
- * A release callback should be registered to allow a device driver to
- * be notified that it should not launch any new translation requests
- * as the final TLB invalidate is about to occur.
- *
- * Returns an error if there no contexts are currently available or a
- * npu_context which should be passed to pnv_npu2_handle_fault().
- *
- * mmap_sem must be held in write mode and must not be called from interrupt
- * context.
- */
-struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
-			unsigned long flags,
-			void (*cb)(struct npu_context *, void *),
-			void *priv)
-{
-	int rc;
-	u32 nvlink_index;
-	struct device_node *nvlink_dn;
-	struct mm_struct *mm = current->mm;
-	struct pnv_phb *nphb;
-	struct npu *npu;
-	struct npu_context *npu_context;
-
-	/*
-	 * At present we don't support GPUs connected to multiple NPUs and I'm
-	 * not sure the hardware does either.
-	 */
-	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-
-	if (!firmware_has_feature(FW_FEATURE_OPAL))
-		return ERR_PTR(-ENODEV);
-
-	if (!npdev)
-		/* No nvlink associated with this GPU device */
-		return ERR_PTR(-ENODEV);
-
-	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
-	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
-							&nvlink_index)))
-		return ERR_PTR(-ENODEV);
-
-	if (!mm || mm->context.id == 0) {
-		/*
-		 * Kernel thread contexts are not supported and context id 0 is
-		 * reserved on the GPU.
-		 */
-		return ERR_PTR(-EINVAL);
-	}
-
-	nphb = pci_bus_to_host(npdev->bus)->private_data;
-	npu = &nphb->npu;
-
-	/*
-	 * Setup the NPU context table for a particular GPU. These need to be
-	 * per-GPU as we need the tables to filter ATSDs when there are no
-	 * active contexts on a particular GPU. It is safe for these to be
-	 * called concurrently with destroy as the OPAL call takes appropriate
-	 * locks and refcounts on init/destroy.
-	 */
-	rc = opal_npu_init_context(nphb->opal_id, mm->context.id, flags,
-				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
-	if (rc < 0)
-		return ERR_PTR(-ENOSPC);
-
-	/*
-	 * We store the npu pci device so we can more easily get at the
-	 * associated npus.
-	 */
-	spin_lock(&npu_context_lock);
-	npu_context = mm->context.npu_context;
-	if (npu_context) {
-		if (npu_context->release_cb != cb ||
-			npu_context->priv != priv) {
-			spin_unlock(&npu_context_lock);
-			opal_npu_destroy_context(nphb->opal_id, mm->context.id,
-						PCI_DEVID(gpdev->bus->number,
-							gpdev->devfn));
-			return ERR_PTR(-EINVAL);
-		}
-
-		WARN_ON(!kref_get_unless_zero(&npu_context->kref));
-	}
-	spin_unlock(&npu_context_lock);
-
-	if (!npu_context) {
-		/*
-		 * We can set up these fields without holding the
-		 * npu_context_lock as the npu_context hasn't been returned to
-		 * the caller meaning it can't be destroyed. Parallel allocation
-		 * is protected against by mmap_sem.
-		 */
-		rc = -ENOMEM;
-		npu_context = kzalloc(sizeof(struct npu_context), GFP_KERNEL);
-		if (npu_context) {
-			kref_init(&npu_context->kref);
-			npu_context->mm = mm;
-			npu_context->mn.ops = &nv_nmmu_notifier_ops;
-			rc = __mmu_notifier_register(&npu_context->mn, mm);
-		}
-
-		if (rc) {
-			kfree(npu_context);
-			opal_npu_destroy_context(nphb->opal_id, mm->context.id,
-					PCI_DEVID(gpdev->bus->number,
-						gpdev->devfn));
-			return ERR_PTR(rc);
-		}
-
-		mm->context.npu_context = npu_context;
-	}
-
-	npu_context->release_cb = cb;
-	npu_context->priv = priv;
-
-	/*
-	 * npdev is a pci_dev pointer setup by the PCI code. We assign it to
-	 * npdev[][] to indicate to the mmu notifiers that an invalidation
-	 * should also be sent over this nvlink. The notifiers don't use any
-	 * other fields in npu_context, so we just need to ensure that when they
-	 * deference npu_context->npdev[][] it is either a valid pointer or
-	 * NULL.
-	 */
-	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev);
-
-	if (!nphb->npu.nmmu_flush) {
-		/*
-		 * If we're not explicitly flushing ourselves we need to mark
-		 * the thread for global flushes
-		 */
-		npu_context->nmmu_flush = false;
-		mm_context_add_copro(mm);
-	} else
-		npu_context->nmmu_flush = true;
-
-	return npu_context;
-}
-EXPORT_SYMBOL(pnv_npu2_init_context);
-
-static void pnv_npu2_release_context(struct kref *kref)
-{
-	struct npu_context *npu_context =
-		container_of(kref, struct npu_context, kref);
-
-	if (!npu_context->nmmu_flush)
-		mm_context_remove_copro(npu_context->mm);
-
-	npu_context->mm->context.npu_context = NULL;
-}
-
-/*
- * Destroy a context on the given GPU. May free the npu_context if it is no
- * longer active on any GPUs. Must not be called from interrupt context.
- */
-void pnv_npu2_destroy_context(struct npu_context *npu_context,
-			struct pci_dev *gpdev)
-{
-	int removed;
-	struct pnv_phb *nphb;
-	struct npu *npu;
-	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-	struct device_node *nvlink_dn;
-	u32 nvlink_index;
-
-	if (WARN_ON(!npdev))
-		return;
-
-	if (!firmware_has_feature(FW_FEATURE_OPAL))
-		return;
-
-	nphb = pci_bus_to_host(npdev->bus)->private_data;
-	npu = &nphb->npu;
-	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
-	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
-							&nvlink_index)))
-		return;
-	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
-	opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
-				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
-	spin_lock(&npu_context_lock);
-	removed = kref_put(&npu_context->kref, pnv_npu2_release_context);
-	spin_unlock(&npu_context_lock);
-
-	/*
-	 * We need to do this outside of pnv_npu2_release_context so that it is
-	 * outside the spinlock as mmu_notifier_destroy uses SRCU.
-	 */
-	if (removed) {
-		mmu_notifier_unregister(&npu_context->mn,
-					npu_context->mm);
-
-		kfree(npu_context);
-	}
-
-}
-EXPORT_SYMBOL(pnv_npu2_destroy_context);
-
-/*
- * Assumes mmap_sem is held for the contexts associated mm.
- */
-int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
-			unsigned long *flags, unsigned long *status, int count)
-{
-	u64 rc = 0, result = 0;
-	int i, is_write;
-	struct page *page[1];
-
-	/* mmap_sem should be held so the struct_mm must be present */
-	struct mm_struct *mm = context->mm;
-
-	if (!firmware_has_feature(FW_FEATURE_OPAL))
-		return -ENODEV;
-
-	WARN_ON(!rwsem_is_locked(&mm->mmap_sem));
-
-	for (i = 0; i < count; i++) {
-		is_write = flags[i] & NPU2_WRITE;
-		rc = get_user_pages_remote(NULL, mm, ea[i], 1,
-					is_write ? FOLL_WRITE : 0,
-					page, NULL, NULL);
-
-		/*
-		 * To support virtualised environments we will have to do an
-		 * access to the page to ensure it gets faulted into the
-		 * hypervisor. For the moment virtualisation is not supported in
-		 * other areas so leave the access out.
-		 */
-		if (rc != 1) {
-			status[i] = rc;
-			result = -EFAULT;
-			continue;
-		}
-
-		status[i] = 0;
-		put_page(page[0]);
-	}
-
-	return result;
-}
-EXPORT_SYMBOL(pnv_npu2_handle_fault);
-
-int pnv_npu2_init(struct pnv_phb *phb)
-{
-	unsigned int i;
-	u64 mmio_atsd;
-	struct device_node *dn;
-	struct pci_dev *gpdev;
-	static int npu_index;
-	uint64_t rc = 0;
-
-	if (!atsd_threshold_dentry) {
-		atsd_threshold_dentry = debugfs_create_x64("atsd_threshold",
-				   0600, powerpc_debugfs_root, &atsd_threshold);
-	}
-
-	phb->npu.nmmu_flush =
-		of_property_read_bool(phb->hose->dn, "ibm,nmmu-flush");
-	for_each_child_of_node(phb->hose->dn, dn) {
-		gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
-		if (gpdev) {
-			rc = opal_npu_map_lpar(phb->opal_id,
-				PCI_DEVID(gpdev->bus->number, gpdev->devfn),
-				0, 0);
-			if (rc)
-				dev_err(&gpdev->dev,
-					"Error %lld mapping device to LPAR\n",
-					rc);
-		}
-	}
-
-	for (i = 0; !of_property_read_u64_index(phb->hose->dn, "ibm,mmio-atsd",
-							i, &mmio_atsd); i++)
-		phb->npu.mmio_atsd_regs[i] = ioremap(mmio_atsd, 32);
-
-	pr_info("NPU%lld: Found %d MMIO ATSD registers", phb->opal_id, i);
-	phb->npu.mmio_atsd_count = i;
-	phb->npu.mmio_atsd_usage = 0;
-	npu_index++;
-	if (WARN_ON(npu_index >= NV_MAX_NPUS))
-		return -ENOSPC;
-	max_npu2_index = npu_index;
-	phb->npu.index = npu_index;
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 913175ba1c10..b6db65917bb4 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1203,75 +1203,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 	return pe;
 }
 
-static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
-{
-	int pe_num, found_pe = false, rc;
-	long rid;
-	struct pnv_ioda_pe *pe;
-	struct pci_dev *gpu_pdev;
-	struct pci_dn *npu_pdn;
-	struct pci_controller *hose = pci_bus_to_host(npu_pdev->bus);
-	struct pnv_phb *phb = hose->private_data;
-
-	/*
-	 * Due to a hardware errata PE#0 on the NPU is reserved for
-	 * error handling. This means we only have three PEs remaining
-	 * which need to be assigned to four links, implying some
-	 * links must share PEs.
-	 *
-	 * To achieve this we assign PEs such that NPUs linking the
-	 * same GPU get assigned the same PE.
-	 */
-	gpu_pdev = pnv_pci_get_gpu_dev(npu_pdev);
-	for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
-		pe = &phb->ioda.pe_array[pe_num];
-		if (!pe->pdev)
-			continue;
-
-		if (pnv_pci_get_gpu_dev(pe->pdev) == gpu_pdev) {
-			/*
-			 * This device has the same peer GPU so should
-			 * be assigned the same PE as the existing
-			 * peer NPU.
-			 */
-			dev_info(&npu_pdev->dev,
-				"Associating to existing PE %x\n", pe_num);
-			pci_dev_get(npu_pdev);
-			npu_pdn = pci_get_pdn(npu_pdev);
-			rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
-			npu_pdn->pe_number = pe_num;
-			phb->ioda.pe_rmap[rid] = pe->pe_number;
-
-			/* Map the PE to this link */
-			rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
-					OpalPciBusAll,
-					OPAL_COMPARE_RID_DEVICE_NUMBER,
-					OPAL_COMPARE_RID_FUNCTION_NUMBER,
-					OPAL_MAP_PE);
-			WARN_ON(rc != OPAL_SUCCESS);
-			found_pe = true;
-			break;
-		}
-	}
-
-	if (!found_pe)
-		/*
-		 * Could not find an existing PE so allocate a new
-		 * one.
-		 */
-		return pnv_ioda_setup_dev_PE(npu_pdev);
-	else
-		return pe;
-}
-
-static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
-{
-	struct pci_dev *pdev;
-
-	list_for_each_entry(pdev, &bus->devices, bus_list)
-		pnv_ioda_setup_npu_PE(pdev);
-}
-
 static void pnv_pci_ioda_setup_PEs(void)
 {
 	struct pci_controller *hose, *tmp;
@@ -1281,13 +1212,6 @@ static void pnv_pci_ioda_setup_PEs(void)
 
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 		phb = hose->private_data;
-		if (phb->type == PNV_PHB_NPU_NVLINK) {
-			/* PE#0 is needed for error reporting */
-			pnv_ioda_reserve_pe(phb, 0);
-			pnv_ioda_setup_npu_PEs(hose->bus);
-			if (phb->model == PNV_PHB_MODEL_NPU2)
-				pnv_npu2_init(phb);
-		}
 		if (phb->type == PNV_PHB_NPU_OCAPI) {
 			bus = hose->bus;
 			list_for_each_entry(pdev, &bus->devices, bus_list)
@@ -1871,9 +1795,6 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 	}
 	*pdev->dev.dma_mask = dma_mask;
 
-	/* Update peer npu devices */
-	pnv_npu_try_dma_set_bypass(pdev, bypass);
-
 	return 0;
 }
 
@@ -2119,14 +2040,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
 	}
 }
 
-void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
-	if (phb->model == PNV_PHB_MODEL_NPU || phb->model == PNV_PHB_MODEL_PHB3)
-		pnv_pci_phb3_tce_invalidate_entire(phb, rm);
-	else
-		opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL, 0, 0, 0, 0);
-}
-
 static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index,
 		long npages, unsigned long uaddr,
 		enum dma_data_direction direction,
@@ -2615,137 +2528,6 @@ static struct iommu_table_group_ops pnv_pci_ioda2_ops = {
 	.take_ownership = pnv_ioda2_take_ownership,
 	.release_ownership = pnv_ioda2_release_ownership,
 };
-
-static int gpe_table_group_to_npe_cb(struct device *dev, void *opaque)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	struct pnv_ioda_pe **ptmppe = opaque;
-	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-	struct pci_dn *pdn = pci_get_pdn(pdev);
-
-	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
-		return 0;
-
-	hose = pci_bus_to_host(pdev->bus);
-	phb = hose->private_data;
-	if (phb->type != PNV_PHB_NPU_NVLINK)
-		return 0;
-
-	*ptmppe = &phb->ioda.pe_array[pdn->pe_number];
-
-	return 1;
-}
-
-/*
- * This returns PE of associated NPU.
- * This assumes that NPU is in the same IOMMU group with GPU and there is
- * no other PEs.
- */
-static struct pnv_ioda_pe *gpe_table_group_to_npe(
-		struct iommu_table_group *table_group)
-{
-	struct pnv_ioda_pe *npe = NULL;
-	int ret = iommu_group_for_each_dev(table_group->group, &npe,
-			gpe_table_group_to_npe_cb);
-
-	BUG_ON(!ret || !npe);
-
-	return npe;
-}
-
-static long pnv_pci_ioda2_npu_set_window(struct iommu_table_group *table_group,
-		int num, struct iommu_table *tbl)
-{
-	struct pnv_ioda_pe *npe = gpe_table_group_to_npe(table_group);
-	int num2 = (num == 0) ? 1 : 0;
-	long ret = pnv_pci_ioda2_set_window(table_group, num, tbl);
-
-	if (ret)
-		return ret;
-
-	if (table_group->tables[num2])
-		pnv_npu_unset_window(npe, num2);
-
-	ret = pnv_npu_set_window(npe, num, tbl);
-	if (ret) {
-		pnv_pci_ioda2_unset_window(table_group, num);
-		if (table_group->tables[num2])
-			pnv_npu_set_window(npe, num2,
-					table_group->tables[num2]);
-	}
-
-	return ret;
-}
-
-static long pnv_pci_ioda2_npu_unset_window(
-		struct iommu_table_group *table_group,
-		int num)
-{
-	struct pnv_ioda_pe *npe = gpe_table_group_to_npe(table_group);
-	int num2 = (num == 0) ? 1 : 0;
-	long ret = pnv_pci_ioda2_unset_window(table_group, num);
-
-	if (ret)
-		return ret;
-
-	if (!npe->table_group.tables[num])
-		return 0;
-
-	ret = pnv_npu_unset_window(npe, num);
-	if (ret)
-		return ret;
-
-	if (table_group->tables[num2])
-		ret = pnv_npu_set_window(npe, num2, table_group->tables[num2]);
-
-	return ret;
-}
-
-static void pnv_ioda2_npu_take_ownership(struct iommu_table_group *table_group)
-{
-	/*
-	 * Detach NPU first as pnv_ioda2_take_ownership() will destroy
-	 * the iommu_table if 32bit DMA is enabled.
-	 */
-	pnv_npu_take_ownership(gpe_table_group_to_npe(table_group));
-	pnv_ioda2_take_ownership(table_group);
-}
-
-static struct iommu_table_group_ops pnv_pci_ioda2_npu_ops = {
-	.get_table_size = pnv_pci_ioda2_get_table_size,
-	.create_table = pnv_pci_ioda2_create_table_userspace,
-	.set_window = pnv_pci_ioda2_npu_set_window,
-	.unset_window = pnv_pci_ioda2_npu_unset_window,
-	.take_ownership = pnv_ioda2_npu_take_ownership,
-	.release_ownership = pnv_ioda2_release_ownership,
-};
-
-static void pnv_pci_ioda_setup_iommu_api(void)
-{
-	struct pci_controller *hose, *tmp;
-	struct pnv_phb *phb;
-	struct pnv_ioda_pe *pe, *gpe;
-
-	/*
-	 * Now we have all PHBs discovered, time to add NPU devices to
-	 * the corresponding IOMMU groups.
-	 */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		phb = hose->private_data;
-
-		if (phb->type != PNV_PHB_NPU_NVLINK)
-			continue;
-
-		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-			gpe = pnv_pci_npu_setup_iommu(pe);
-			if (gpe)
-				gpe->table_group.ops = &pnv_pci_ioda2_npu_ops;
-		}
-	}
-}
-#else /* !CONFIG_IOMMU_API */
-static void pnv_pci_ioda_setup_iommu_api(void) { };
 #endif
 
 static unsigned long pnv_ioda_parse_tce_sizes(struct pnv_phb *phb)
@@ -3242,7 +3024,6 @@ static void pnv_pci_enable_bridges(void)
 static void pnv_pci_ioda_fixup(void)
 {
 	pnv_pci_ioda_setup_PEs();
-	pnv_pci_ioda_setup_iommu_api();
 	pnv_pci_ioda_create_dbgfs();
 
 	pnv_pci_enable_bridges();
@@ -3689,27 +3470,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 	.shutdown		= pnv_pci_ioda_shutdown,
 };
 
-static int pnv_npu_dma_set_mask(struct pci_dev *npdev, u64 dma_mask)
-{
-	dev_err_once(&npdev->dev,
-			"%s operation unsupported for NVLink devices\n",
-			__func__);
-	return -EPERM;
-}
-
-static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
-	.dma_dev_setup		= pnv_pci_dma_dev_setup,
-#ifdef CONFIG_PCI_MSI
-	.setup_msi_irqs		= pnv_setup_msi_irqs,
-	.teardown_msi_irqs	= pnv_teardown_msi_irqs,
-#endif
-	.enable_device_hook	= pnv_pci_enable_device_hook,
-	.window_alignment	= pnv_pci_window_alignment,
-	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
-	.dma_set_mask		= pnv_npu_dma_set_mask,
-	.shutdown		= pnv_pci_ioda_shutdown,
-};
-
 static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
 	.enable_device_hook	= pnv_pci_enable_device_hook,
 	.window_alignment	= pnv_pci_window_alignment,
@@ -3931,9 +3691,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 
 	switch (phb->type) {
-	case PNV_PHB_NPU_NVLINK:
-		hose->controller_ops = pnv_npu_ioda_controller_ops;
-		break;
 	case PNV_PHB_NPU_OCAPI:
 		hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
 		break;
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8b37b28e3831..54f2935b7ac5 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -231,17 +231,6 @@ extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 #define pe_info(pe, fmt, ...)					\
 	pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)
 
-/* Nvlink functions */
-extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
-extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm);
-extern struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe);
-extern long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
-		struct iommu_table *tbl);
-extern long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num);
-extern void pnv_npu_take_ownership(struct pnv_ioda_pe *npe);
-extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
-extern int pnv_npu2_init(struct pnv_phb *phb);
-
 /* pci-ioda-tce.c */
 #define POWERNV_IOMMU_DEFAULT_LEVELS	1
 #define POWERNV_IOMMU_MAX_LEVELS	5
-- 
2.19.0


WARNING: multiple messages have this Message-ID
From: Christoph Hellwig <hch@lst.de>
To: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Paul Mackerras <paulus@samba.org>,
	Michael Ellerman <mpe@ellerman.id.au>
Cc: linux-arch@vger.kernel.org, linux-mm@kvack.org,
	iommu@lists.linux-foundation.org, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH 16/33] powerpc/powernv: remove dead npu-dma code
Date: Tue,  9 Oct 2018 15:24:43 +0200	[thread overview]
Message-ID: <20181009132500.17643-17-hch@lst.de> (raw)
In-Reply-To: <20181009132500.17643-1-hch@lst.de>

This code has been unused since it was merged and is in the way of
cleaning up the DMA code, thus remove it.

This effectively reverts commit 5d2aa710 ("powerpc/powernv: Add support
for Nvlink NPUs").

Signed-off-by: Christoph Hellwig <hch@lst.de>
---
 arch/powerpc/include/asm/pci.h            |   3 -
 arch/powerpc/include/asm/powernv.h        |  23 -
 arch/powerpc/platforms/powernv/Makefile   |   2 +-
 arch/powerpc/platforms/powernv/npu-dma.c  | 999 ----------------------
 arch/powerpc/platforms/powernv/pci-ioda.c | 243 ------
 arch/powerpc/platforms/powernv/pci.h      |  11 -
 6 files changed, 1 insertion(+), 1280 deletions(-)
 delete mode 100644 arch/powerpc/platforms/powernv/npu-dma.c

diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 2af9ded80540..a01d2e3d6ff9 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -127,7 +127,4 @@ extern void pcibios_scan_phb(struct pci_controller *hose);
 
 #endif	/* __KERNEL__ */
 
-extern struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev);
-extern struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index);
-
 #endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/powernv.h b/arch/powerpc/include/asm/powernv.h
index 2f3ff7a27881..4848a6b3c6b2 100644
--- a/arch/powerpc/include/asm/powernv.h
+++ b/arch/powerpc/include/asm/powernv.h
@@ -11,33 +11,10 @@
 #define _ASM_POWERNV_H
 
 #ifdef CONFIG_PPC_POWERNV
-#define NPU2_WRITE 1
 extern void powernv_set_nmmu_ptcr(unsigned long ptcr);
-extern struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
-			unsigned long flags,
-			void (*cb)(struct npu_context *, void *),
-			void *priv);
-extern void pnv_npu2_destroy_context(struct npu_context *context,
-				struct pci_dev *gpdev);
-extern int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
-				unsigned long *flags, unsigned long *status,
-				int count);
-
 void pnv_tm_init(void);
 #else
 static inline void powernv_set_nmmu_ptcr(unsigned long ptcr) { }
-static inline struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
-			unsigned long flags,
-			struct npu_context *(*cb)(struct npu_context *, void *),
-			void *priv) { return ERR_PTR(-ENODEV); }
-static inline void pnv_npu2_destroy_context(struct npu_context *context,
-					struct pci_dev *gpdev) { }
-
-static inline int pnv_npu2_handle_fault(struct npu_context *context,
-					uintptr_t *ea, unsigned long *flags,
-					unsigned long *status, int count) {
-	return -ENODEV;
-}
 
 static inline void pnv_tm_init(void) { }
 static inline void pnv_power9_force_smt4(void) { }
diff --git a/arch/powerpc/platforms/powernv/Makefile b/arch/powerpc/platforms/powernv/Makefile
index b540ce8eec55..2b13e9dd137c 100644
--- a/arch/powerpc/platforms/powernv/Makefile
+++ b/arch/powerpc/platforms/powernv/Makefile
@@ -6,7 +6,7 @@ obj-y			+= opal-msglog.o opal-hmi.o opal-power.o opal-irqchip.o
 obj-y			+= opal-kmsg.o opal-powercap.o opal-psr.o opal-sensor-groups.o
 
 obj-$(CONFIG_SMP)	+= smp.o subcore.o subcore-asm.o
-obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o npu-dma.o pci-ioda-tce.o
+obj-$(CONFIG_PCI)	+= pci.o pci-ioda.o pci-ioda-tce.o
 obj-$(CONFIG_CXL_BASE)	+= pci-cxl.o
 obj-$(CONFIG_EEH)	+= eeh-powernv.o
 obj-$(CONFIG_PPC_SCOM)	+= opal-xscom.o
diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
deleted file mode 100644
index 8006c54a91e3..000000000000
--- a/arch/powerpc/platforms/powernv/npu-dma.c
+++ /dev/null
@@ -1,999 +0,0 @@
-/*
- * This file implements the DMA operations for NVLink devices. The NPU
- * devices all point to the same iommu table as the parent PCI device.
- *
- * Copyright Alistair Popple, IBM Corporation 2015.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of version 2 of the GNU General Public
- * License as published by the Free Software Foundation.
- */
-
-#include <linux/slab.h>
-#include <linux/mmu_notifier.h>
-#include <linux/mmu_context.h>
-#include <linux/of.h>
-#include <linux/export.h>
-#include <linux/pci.h>
-#include <linux/memblock.h>
-#include <linux/iommu.h>
-#include <linux/debugfs.h>
-
-#include <asm/debugfs.h>
-#include <asm/tlb.h>
-#include <asm/powernv.h>
-#include <asm/reg.h>
-#include <asm/opal.h>
-#include <asm/io.h>
-#include <asm/iommu.h>
-#include <asm/pnv-pci.h>
-#include <asm/msi_bitmap.h>
-#include <asm/opal.h>
-
-#include "powernv.h"
-#include "pci.h"
-
-#define npu_to_phb(x) container_of(x, struct pnv_phb, npu)
-
-/*
- * spinlock to protect initialisation of an npu_context for a particular
- * mm_struct.
- */
-static DEFINE_SPINLOCK(npu_context_lock);
-
-/*
- * When an address shootdown range exceeds this threshold we invalidate the
- * entire TLB on the GPU for the given PID rather than each specific address in
- * the range.
- */
-static uint64_t atsd_threshold = 2 * 1024 * 1024;
-static struct dentry *atsd_threshold_dentry;
-
-/*
- * Other types of TCE cache invalidation are not functional in the
- * hardware.
- */
-static struct pci_dev *get_pci_dev(struct device_node *dn)
-{
-	struct pci_dn *pdn = PCI_DN(dn);
-
-	return pci_get_domain_bus_and_slot(pci_domain_nr(pdn->phb->bus),
-					   pdn->busno, pdn->devfn);
-}
-
-/* Given a NPU device get the associated PCI device. */
-struct pci_dev *pnv_pci_get_gpu_dev(struct pci_dev *npdev)
-{
-	struct device_node *dn;
-	struct pci_dev *gpdev;
-
-	if (WARN_ON(!npdev))
-		return NULL;
-
-	if (WARN_ON(!npdev->dev.of_node))
-		return NULL;
-
-	/* Get assoicated PCI device */
-	dn = of_parse_phandle(npdev->dev.of_node, "ibm,gpu", 0);
-	if (!dn)
-		return NULL;
-
-	gpdev = get_pci_dev(dn);
-	of_node_put(dn);
-
-	return gpdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_gpu_dev);
-
-/* Given the real PCI device get a linked NPU device. */
-struct pci_dev *pnv_pci_get_npu_dev(struct pci_dev *gpdev, int index)
-{
-	struct device_node *dn;
-	struct pci_dev *npdev;
-
-	if (WARN_ON(!gpdev))
-		return NULL;
-
-	/* Not all PCI devices have device-tree nodes */
-	if (!gpdev->dev.of_node)
-		return NULL;
-
-	/* Get assoicated PCI device */
-	dn = of_parse_phandle(gpdev->dev.of_node, "ibm,npu", index);
-	if (!dn)
-		return NULL;
-
-	npdev = get_pci_dev(dn);
-	of_node_put(dn);
-
-	return npdev;
-}
-EXPORT_SYMBOL(pnv_pci_get_npu_dev);
-
-#define NPU_DMA_OP_UNSUPPORTED()					\
-	dev_err_once(dev, "%s operation unsupported for NVLink devices\n", \
-		__func__)
-
-static void *dma_npu_alloc(struct device *dev, size_t size,
-			   dma_addr_t *dma_handle, gfp_t flag,
-			   unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return NULL;
-}
-
-static void dma_npu_free(struct device *dev, size_t size,
-			 void *vaddr, dma_addr_t dma_handle,
-			 unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-}
-
-static dma_addr_t dma_npu_map_page(struct device *dev, struct page *page,
-				   unsigned long offset, size_t size,
-				   enum dma_data_direction direction,
-				   unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static int dma_npu_map_sg(struct device *dev, struct scatterlist *sglist,
-			  int nelems, enum dma_data_direction direction,
-			  unsigned long attrs)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static int dma_npu_dma_supported(struct device *dev, u64 mask)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static u64 dma_npu_get_required_mask(struct device *dev)
-{
-	NPU_DMA_OP_UNSUPPORTED();
-	return 0;
-}
-
-static const struct dma_map_ops dma_npu_ops = {
-	.map_page		= dma_npu_map_page,
-	.map_sg			= dma_npu_map_sg,
-	.alloc			= dma_npu_alloc,
-	.free			= dma_npu_free,
-	.dma_supported		= dma_npu_dma_supported,
-	.get_required_mask	= dma_npu_get_required_mask,
-};
-
-/*
- * Returns the PE assoicated with the PCI device of the given
- * NPU. Returns the linked pci device if pci_dev != NULL.
- */
-static struct pnv_ioda_pe *get_gpu_pci_dev_and_pe(struct pnv_ioda_pe *npe,
-						  struct pci_dev **gpdev)
-{
-	struct pnv_phb *phb;
-	struct pci_controller *hose;
-	struct pci_dev *pdev;
-	struct pnv_ioda_pe *pe;
-	struct pci_dn *pdn;
-
-	pdev = pnv_pci_get_gpu_dev(npe->pdev);
-	if (!pdev)
-		return NULL;
-
-	pdn = pci_get_pdn(pdev);
-	if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-		return NULL;
-
-	hose = pci_bus_to_host(pdev->bus);
-	phb = hose->private_data;
-	pe = &phb->ioda.pe_array[pdn->pe_number];
-
-	if (gpdev)
-		*gpdev = pdev;
-
-	return pe;
-}
-
-long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
-		struct iommu_table *tbl)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-	const unsigned long size = tbl->it_indirect_levels ?
-		tbl->it_level_size : tbl->it_size;
-	const __u64 start_addr = tbl->it_offset << tbl->it_page_shift;
-	const __u64 win_size = tbl->it_size << tbl->it_page_shift;
-
-	pe_info(npe, "Setting up window %llx..%llx pg=%lx\n",
-			start_addr, start_addr + win_size - 1,
-			IOMMU_PAGE_SIZE(tbl));
-
-	rc = opal_pci_map_pe_dma_window(phb->opal_id,
-			npe->pe_number,
-			npe->pe_number,
-			tbl->it_indirect_levels + 1,
-			__pa(tbl->it_base),
-			size << 3,
-			IOMMU_PAGE_SIZE(tbl));
-	if (rc) {
-		pe_err(npe, "Failed to configure TCE table, err %lld\n", rc);
-		return rc;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	/* Add the table to the list so its TCE cache will get invalidated */
-	pnv_pci_link_table_and_group(phb->hose->node, num,
-			tbl, &npe->table_group);
-
-	return 0;
-}
-
-long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-
-	pe_info(npe, "Removing DMA window\n");
-
-	rc = opal_pci_map_pe_dma_window(phb->opal_id, npe->pe_number,
-			npe->pe_number,
-			0/* levels */, 0/* table address */,
-			0/* table size */, 0/* page size */);
-	if (rc) {
-		pe_err(npe, "Unmapping failed, ret = %lld\n", rc);
-		return rc;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	pnv_pci_unlink_table_and_group(npe->table_group.tables[num],
-			&npe->table_group);
-
-	return 0;
-}
-
-/*
- * Enables 32 bit DMA on NPU.
- */
-static void pnv_npu_dma_set_32(struct pnv_ioda_pe *npe)
-{
-	struct pci_dev *gpdev;
-	struct pnv_ioda_pe *gpe;
-	int64_t rc;
-
-	/*
-	 * Find the assoicated PCI devices and get the dma window
-	 * information from there.
-	 */
-	if (!npe->pdev || !(npe->flags & PNV_IODA_PE_DEV))
-		return;
-
-	gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
-	if (!gpe)
-		return;
-
-	rc = pnv_npu_set_window(npe, 0, gpe->table_group.tables[0]);
-
-	/*
-	 * We don't initialise npu_pe->tce32_table as we always use
-	 * dma_npu_ops which are nops.
-	 */
-	set_dma_ops(&npe->pdev->dev, &dma_npu_ops);
-}
-
-/*
- * Enables bypass mode on the NPU. The NPU only supports one
- * window per link, so bypass needs to be explicitly enabled or
- * disabled. Unlike for a PHB3 bypass and non-bypass modes can't be
- * active at the same time.
- */
-static int pnv_npu_dma_set_bypass(struct pnv_ioda_pe *npe)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc = 0;
-	phys_addr_t top = memblock_end_of_DRAM();
-
-	if (phb->type != PNV_PHB_NPU_NVLINK || !npe->pdev)
-		return -EINVAL;
-
-	rc = pnv_npu_unset_window(npe, 0);
-	if (rc != OPAL_SUCCESS)
-		return rc;
-
-	/* Enable the bypass window */
-
-	top = roundup_pow_of_two(top);
-	dev_info(&npe->pdev->dev, "Enabling bypass for PE %x\n",
-			npe->pe_number);
-	rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
-			npe->pe_number, npe->pe_number,
-			0 /* bypass base */, top);
-
-	if (rc == OPAL_SUCCESS)
-		pnv_pci_ioda2_tce_invalidate_entire(phb, false);
-
-	return rc;
-}
-
-void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass)
-{
-	int i;
-	struct pnv_phb *phb;
-	struct pci_dn *pdn;
-	struct pnv_ioda_pe *npe;
-	struct pci_dev *npdev;
-
-	for (i = 0; ; ++i) {
-		npdev = pnv_pci_get_npu_dev(gpdev, i);
-
-		if (!npdev)
-			break;
-
-		pdn = pci_get_pdn(npdev);
-		if (WARN_ON(!pdn || pdn->pe_number == IODA_INVALID_PE))
-			return;
-
-		phb = pci_bus_to_host(npdev->bus)->private_data;
-
-		/* We only do bypass if it's enabled on the linked device */
-		npe = &phb->ioda.pe_array[pdn->pe_number];
-
-		if (bypass) {
-			dev_info(&npdev->dev,
-					"Using 64-bit DMA iommu bypass\n");
-			pnv_npu_dma_set_bypass(npe);
-		} else {
-			dev_info(&npdev->dev, "Using 32-bit DMA via iommu\n");
-			pnv_npu_dma_set_32(npe);
-		}
-	}
-}
-
-/* Switch ownership from platform code to external user (e.g. VFIO) */
-void pnv_npu_take_ownership(struct pnv_ioda_pe *npe)
-{
-	struct pnv_phb *phb = npe->phb;
-	int64_t rc;
-
-	/*
-	 * Note: NPU has just a single TVE in the hardware which means that
-	 * while used by the kernel, it can have either 32bit window or
-	 * DMA bypass but never both. So we deconfigure 32bit window only
-	 * if it was enabled at the moment of ownership change.
-	 */
-	if (npe->table_group.tables[0]) {
-		pnv_npu_unset_window(npe, 0);
-		return;
-	}
-
-	/* Disable bypass */
-	rc = opal_pci_map_pe_dma_window_real(phb->opal_id,
-			npe->pe_number, npe->pe_number,
-			0 /* bypass base */, 0);
-	if (rc) {
-		pe_err(npe, "Failed to disable bypass, err %lld\n", rc);
-		return;
-	}
-	pnv_pci_ioda2_tce_invalidate_entire(npe->phb, false);
-}
-
-struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe)
-{
-	struct pnv_phb *phb = npe->phb;
-	struct pci_bus *pbus = phb->hose->bus;
-	struct pci_dev *npdev, *gpdev = NULL, *gptmp;
-	struct pnv_ioda_pe *gpe = get_gpu_pci_dev_and_pe(npe, &gpdev);
-
-	if (!gpe || !gpdev)
-		return NULL;
-
-	list_for_each_entry(npdev, &pbus->devices, bus_list) {
-		gptmp = pnv_pci_get_gpu_dev(npdev);
-
-		if (gptmp != gpdev)
-			continue;
-
-		pe_info(gpe, "Attached NPU %s\n", dev_name(&npdev->dev));
-		iommu_group_add_device(gpe->table_group.group, &npdev->dev);
-	}
-
-	return gpe;
-}
-
-/* Maximum number of nvlinks per npu */
-#define NV_MAX_LINKS 6
-
-/* Maximum index of npu2 hosts in the system. Always < NV_MAX_NPUS */
-static int max_npu2_index;
-
-struct npu_context {
-	struct mm_struct *mm;
-	struct pci_dev *npdev[NV_MAX_NPUS][NV_MAX_LINKS];
-	struct mmu_notifier mn;
-	struct kref kref;
-	bool nmmu_flush;
-
-	/* Callback to stop translation requests on a given GPU */
-	void (*release_cb)(struct npu_context *context, void *priv);
-
-	/*
-	 * Private pointer passed to the above callback for usage by
-	 * device drivers.
-	 */
-	void *priv;
-};
-
-struct mmio_atsd_reg {
-	struct npu *npu;
-	int reg;
-};
-
-/*
- * Find a free MMIO ATSD register and mark it in use. Return -ENOSPC
- * if none are available.
- */
-static int get_mmio_atsd_reg(struct npu *npu)
-{
-	int i;
-
-	for (i = 0; i < npu->mmio_atsd_count; i++) {
-		if (!test_bit(i, &npu->mmio_atsd_usage))
-			if (!test_and_set_bit_lock(i, &npu->mmio_atsd_usage))
-				return i;
-	}
-
-	return -ENOSPC;
-}
-
-static void put_mmio_atsd_reg(struct npu *npu, int reg)
-{
-	clear_bit_unlock(reg, &npu->mmio_atsd_usage);
-}
-
-/* MMIO ATSD register offsets */
-#define XTS_ATSD_AVA  1
-#define XTS_ATSD_STAT 2
-
-static void mmio_launch_invalidate(struct mmio_atsd_reg *mmio_atsd_reg,
-				unsigned long launch, unsigned long va)
-{
-	struct npu *npu = mmio_atsd_reg->npu;
-	int reg = mmio_atsd_reg->reg;
-
-	__raw_writeq_be(va, npu->mmio_atsd_regs[reg] + XTS_ATSD_AVA);
-	eieio();
-	__raw_writeq_be(launch, npu->mmio_atsd_regs[reg]);
-}
-
-static void mmio_invalidate_pid(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
-				unsigned long pid, bool flush)
-{
-	int i;
-	unsigned long launch;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		/* IS set to invalidate matching PID */
-		launch = PPC_BIT(12);
-
-		/* PRS set to process-scoped */
-		launch |= PPC_BIT(13);
-
-		/* AP */
-		launch |= (u64)
-			mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
-
-		/* PID */
-		launch |= pid << PPC_BITLSHIFT(38);
-
-		/* No flush */
-		launch |= !flush << PPC_BITLSHIFT(39);
-
-		/* Invalidating the entire process doesn't use a va */
-		mmio_launch_invalidate(&mmio_atsd_reg[i], launch, 0);
-	}
-}
-
-static void mmio_invalidate_va(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS],
-			unsigned long va, unsigned long pid, bool flush)
-{
-	int i;
-	unsigned long launch;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		/* IS set to invalidate target VA */
-		launch = 0;
-
-		/* PRS set to process scoped */
-		launch |= PPC_BIT(13);
-
-		/* AP */
-		launch |= (u64)
-			mmu_get_ap(mmu_virtual_psize) << PPC_BITLSHIFT(17);
-
-		/* PID */
-		launch |= pid << PPC_BITLSHIFT(38);
-
-		/* No flush */
-		launch |= !flush << PPC_BITLSHIFT(39);
-
-		mmio_launch_invalidate(&mmio_atsd_reg[i], launch, va);
-	}
-}
-
-#define mn_to_npu_context(x) container_of(x, struct npu_context, mn)
-
-static void mmio_invalidate_wait(
-	struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
-	struct npu *npu;
-	int i, reg;
-
-	/* Wait for all invalidations to complete */
-	for (i = 0; i <= max_npu2_index; i++) {
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		/* Wait for completion */
-		npu = mmio_atsd_reg[i].npu;
-		reg = mmio_atsd_reg[i].reg;
-		while (__raw_readq(npu->mmio_atsd_regs[reg] + XTS_ATSD_STAT))
-			cpu_relax();
-	}
-}
-
-/*
- * Acquires all the address translation shootdown (ATSD) registers required to
- * launch an ATSD on all links this npu_context is active on.
- */
-static void acquire_atsd_reg(struct npu_context *npu_context,
-			struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
-	int i, j;
-	struct npu *npu;
-	struct pci_dev *npdev;
-	struct pnv_phb *nphb;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		mmio_atsd_reg[i].reg = -1;
-		for (j = 0; j < NV_MAX_LINKS; j++) {
-			/*
-			 * There are no ordering requirements with respect to
-			 * the setup of struct npu_context, but to ensure
-			 * consistent behaviour we need to ensure npdev[][] is
-			 * only read once.
-			 */
-			npdev = READ_ONCE(npu_context->npdev[i][j]);
-			if (!npdev)
-				continue;
-
-			nphb = pci_bus_to_host(npdev->bus)->private_data;
-			npu = &nphb->npu;
-			mmio_atsd_reg[i].npu = npu;
-			mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
-			while (mmio_atsd_reg[i].reg < 0) {
-				mmio_atsd_reg[i].reg = get_mmio_atsd_reg(npu);
-				cpu_relax();
-			}
-			break;
-		}
-	}
-}
-
-/*
- * Release previously acquired ATSD registers. To avoid deadlocks the registers
- * must be released in the same order they were acquired above in
- * acquire_atsd_reg.
- */
-static void release_atsd_reg(struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS])
-{
-	int i;
-
-	for (i = 0; i <= max_npu2_index; i++) {
-		/*
-		 * We can't rely on npu_context->npdev[][] being the same here
-		 * as when acquire_atsd_reg() was called, hence we use the
-		 * values stored in mmio_atsd_reg during the acquire phase
-		 * rather than re-reading npdev[][].
-		 */
-		if (mmio_atsd_reg[i].reg < 0)
-			continue;
-
-		put_mmio_atsd_reg(mmio_atsd_reg[i].npu, mmio_atsd_reg[i].reg);
-	}
-}
-
-/*
- * Invalidate either a single address or an entire PID depending on
- * the value of va.
- */
-static void mmio_invalidate(struct npu_context *npu_context, int va,
-			unsigned long address, bool flush)
-{
-	struct mmio_atsd_reg mmio_atsd_reg[NV_MAX_NPUS];
-	unsigned long pid = npu_context->mm->context.id;
-
-	if (npu_context->nmmu_flush)
-		/*
-		 * Unfortunately the nest mmu does not support flushing specific
-		 * addresses so we have to flush the whole mm once before
-		 * shooting down the GPU translation.
-		 */
-		flush_all_mm(npu_context->mm);
-
-	/*
-	 * Loop over all the NPUs this process is active on and launch
-	 * an invalidate.
-	 */
-	acquire_atsd_reg(npu_context, mmio_atsd_reg);
-	if (va)
-		mmio_invalidate_va(mmio_atsd_reg, address, pid, flush);
-	else
-		mmio_invalidate_pid(mmio_atsd_reg, pid, flush);
-
-	mmio_invalidate_wait(mmio_atsd_reg);
-	if (flush) {
-		/*
-		 * The GPU requires two flush ATSDs to ensure all entries have
-		 * been flushed. We use PID 0 as it will never be used for a
-		 * process on the GPU.
-		 */
-		mmio_invalidate_pid(mmio_atsd_reg, 0, true);
-		mmio_invalidate_wait(mmio_atsd_reg);
-		mmio_invalidate_pid(mmio_atsd_reg, 0, true);
-		mmio_invalidate_wait(mmio_atsd_reg);
-	}
-	release_atsd_reg(mmio_atsd_reg);
-}
-
-static void pnv_npu2_mn_release(struct mmu_notifier *mn,
-				struct mm_struct *mm)
-{
-	struct npu_context *npu_context = mn_to_npu_context(mn);
-
-	/* Call into device driver to stop requests to the NMMU */
-	if (npu_context->release_cb)
-		npu_context->release_cb(npu_context, npu_context->priv);
-
-	/*
-	 * There should be no more translation requests for this PID, but we
-	 * need to ensure any entries for it are removed from the TLB.
-	 */
-	mmio_invalidate(npu_context, 0, 0, true);
-}
-
-static void pnv_npu2_mn_change_pte(struct mmu_notifier *mn,
-				struct mm_struct *mm,
-				unsigned long address,
-				pte_t pte)
-{
-	struct npu_context *npu_context = mn_to_npu_context(mn);
-
-	mmio_invalidate(npu_context, 1, address, true);
-}
-
-static void pnv_npu2_mn_invalidate_range(struct mmu_notifier *mn,
-					struct mm_struct *mm,
-					unsigned long start, unsigned long end)
-{
-	struct npu_context *npu_context = mn_to_npu_context(mn);
-	unsigned long address;
-
-	if (end - start > atsd_threshold) {
-		/*
-		 * Just invalidate the entire PID if the address range is too
-		 * large.
-		 */
-		mmio_invalidate(npu_context, 0, 0, true);
-	} else {
-		for (address = start; address < end; address += PAGE_SIZE)
-			mmio_invalidate(npu_context, 1, address, false);
-
-		/* Do the flush only on the final addess == end */
-		mmio_invalidate(npu_context, 1, address, true);
-	}
-}
-
-static const struct mmu_notifier_ops nv_nmmu_notifier_ops = {
-	.release = pnv_npu2_mn_release,
-	.change_pte = pnv_npu2_mn_change_pte,
-	.invalidate_range = pnv_npu2_mn_invalidate_range,
-};
-
-/*
- * Call into OPAL to setup the nmmu context for the current task in
- * the NPU. This must be called to setup the context tables before the
- * GPU issues ATRs. pdev should be a pointed to PCIe GPU device.
- *
- * A release callback should be registered to allow a device driver to
- * be notified that it should not launch any new translation requests
- * as the final TLB invalidate is about to occur.
- *
- * Returns an error if there no contexts are currently available or a
- * npu_context which should be passed to pnv_npu2_handle_fault().
- *
- * mmap_sem must be held in write mode and must not be called from interrupt
- * context.
- */
-struct npu_context *pnv_npu2_init_context(struct pci_dev *gpdev,
-			unsigned long flags,
-			void (*cb)(struct npu_context *, void *),
-			void *priv)
-{
-	int rc;
-	u32 nvlink_index;
-	struct device_node *nvlink_dn;
-	struct mm_struct *mm = current->mm;
-	struct pnv_phb *nphb;
-	struct npu *npu;
-	struct npu_context *npu_context;
-
-	/*
-	 * At present we don't support GPUs connected to multiple NPUs and I'm
-	 * not sure the hardware does either.
-	 */
-	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-
-	if (!firmware_has_feature(FW_FEATURE_OPAL))
-		return ERR_PTR(-ENODEV);
-
-	if (!npdev)
-		/* No nvlink associated with this GPU device */
-		return ERR_PTR(-ENODEV);
-
-	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
-	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
-							&nvlink_index)))
-		return ERR_PTR(-ENODEV);
-
-	if (!mm || mm->context.id == 0) {
-		/*
-		 * Kernel thread contexts are not supported and context id 0 is
-		 * reserved on the GPU.
-		 */
-		return ERR_PTR(-EINVAL);
-	}
-
-	nphb = pci_bus_to_host(npdev->bus)->private_data;
-	npu = &nphb->npu;
-
-	/*
-	 * Setup the NPU context table for a particular GPU. These need to be
-	 * per-GPU as we need the tables to filter ATSDs when there are no
-	 * active contexts on a particular GPU. It is safe for these to be
-	 * called concurrently with destroy as the OPAL call takes appropriate
-	 * locks and refcounts on init/destroy.
-	 */
-	rc = opal_npu_init_context(nphb->opal_id, mm->context.id, flags,
-				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
-	if (rc < 0)
-		return ERR_PTR(-ENOSPC);
-
-	/*
-	 * We store the npu pci device so we can more easily get at the
-	 * associated npus.
-	 */
-	spin_lock(&npu_context_lock);
-	npu_context = mm->context.npu_context;
-	if (npu_context) {
-		if (npu_context->release_cb != cb ||
-			npu_context->priv != priv) {
-			spin_unlock(&npu_context_lock);
-			opal_npu_destroy_context(nphb->opal_id, mm->context.id,
-						PCI_DEVID(gpdev->bus->number,
-							gpdev->devfn));
-			return ERR_PTR(-EINVAL);
-		}
-
-		WARN_ON(!kref_get_unless_zero(&npu_context->kref));
-	}
-	spin_unlock(&npu_context_lock);
-
-	if (!npu_context) {
-		/*
-		 * We can set up these fields without holding the
-		 * npu_context_lock as the npu_context hasn't been returned to
-		 * the caller meaning it can't be destroyed. Parallel allocation
-		 * is protected against by mmap_sem.
-		 */
-		rc = -ENOMEM;
-		npu_context = kzalloc(sizeof(struct npu_context), GFP_KERNEL);
-		if (npu_context) {
-			kref_init(&npu_context->kref);
-			npu_context->mm = mm;
-			npu_context->mn.ops = &nv_nmmu_notifier_ops;
-			rc = __mmu_notifier_register(&npu_context->mn, mm);
-		}
-
-		if (rc) {
-			kfree(npu_context);
-			opal_npu_destroy_context(nphb->opal_id, mm->context.id,
-					PCI_DEVID(gpdev->bus->number,
-						gpdev->devfn));
-			return ERR_PTR(rc);
-		}
-
-		mm->context.npu_context = npu_context;
-	}
-
-	npu_context->release_cb = cb;
-	npu_context->priv = priv;
-
-	/*
-	 * npdev is a pci_dev pointer setup by the PCI code. We assign it to
-	 * npdev[][] to indicate to the mmu notifiers that an invalidation
-	 * should also be sent over this nvlink. The notifiers don't use any
-	 * other fields in npu_context, so we just need to ensure that when they
-	 * deference npu_context->npdev[][] it is either a valid pointer or
-	 * NULL.
-	 */
-	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], npdev);
-
-	if (!nphb->npu.nmmu_flush) {
-		/*
-		 * If we're not explicitly flushing ourselves we need to mark
-		 * the thread for global flushes
-		 */
-		npu_context->nmmu_flush = false;
-		mm_context_add_copro(mm);
-	} else
-		npu_context->nmmu_flush = true;
-
-	return npu_context;
-}
-EXPORT_SYMBOL(pnv_npu2_init_context);
-
-static void pnv_npu2_release_context(struct kref *kref)
-{
-	struct npu_context *npu_context =
-		container_of(kref, struct npu_context, kref);
-
-	if (!npu_context->nmmu_flush)
-		mm_context_remove_copro(npu_context->mm);
-
-	npu_context->mm->context.npu_context = NULL;
-}
-
-/*
- * Destroy a context on the given GPU. May free the npu_context if it is no
- * longer active on any GPUs. Must not be called from interrupt context.
- */
-void pnv_npu2_destroy_context(struct npu_context *npu_context,
-			struct pci_dev *gpdev)
-{
-	int removed;
-	struct pnv_phb *nphb;
-	struct npu *npu;
-	struct pci_dev *npdev = pnv_pci_get_npu_dev(gpdev, 0);
-	struct device_node *nvlink_dn;
-	u32 nvlink_index;
-
-	if (WARN_ON(!npdev))
-		return;
-
-	if (!firmware_has_feature(FW_FEATURE_OPAL))
-		return;
-
-	nphb = pci_bus_to_host(npdev->bus)->private_data;
-	npu = &nphb->npu;
-	nvlink_dn = of_parse_phandle(npdev->dev.of_node, "ibm,nvlink", 0);
-	if (WARN_ON(of_property_read_u32(nvlink_dn, "ibm,npu-link-index",
-							&nvlink_index)))
-		return;
-	WRITE_ONCE(npu_context->npdev[npu->index][nvlink_index], NULL);
-	opal_npu_destroy_context(nphb->opal_id, npu_context->mm->context.id,
-				PCI_DEVID(gpdev->bus->number, gpdev->devfn));
-	spin_lock(&npu_context_lock);
-	removed = kref_put(&npu_context->kref, pnv_npu2_release_context);
-	spin_unlock(&npu_context_lock);
-
-	/*
-	 * We need to do this outside of pnv_npu2_release_context so that it is
-	 * outside the spinlock as mmu_notifier_destroy uses SRCU.
-	 */
-	if (removed) {
-		mmu_notifier_unregister(&npu_context->mn,
-					npu_context->mm);
-
-		kfree(npu_context);
-	}
-
-}
-EXPORT_SYMBOL(pnv_npu2_destroy_context);
-
-/*
- * Assumes mmap_sem is held for the contexts associated mm.
- */
-int pnv_npu2_handle_fault(struct npu_context *context, uintptr_t *ea,
-			unsigned long *flags, unsigned long *status, int count)
-{
-	u64 rc = 0, result = 0;
-	int i, is_write;
-	struct page *page[1];
-
-	/* mmap_sem should be held so the struct_mm must be present */
-	struct mm_struct *mm = context->mm;
-
-	if (!firmware_has_feature(FW_FEATURE_OPAL))
-		return -ENODEV;
-
-	WARN_ON(!rwsem_is_locked(&mm->mmap_sem));
-
-	for (i = 0; i < count; i++) {
-		is_write = flags[i] & NPU2_WRITE;
-		rc = get_user_pages_remote(NULL, mm, ea[i], 1,
-					is_write ? FOLL_WRITE : 0,
-					page, NULL, NULL);
-
-		/*
-		 * To support virtualised environments we will have to do an
-		 * access to the page to ensure it gets faulted into the
-		 * hypervisor. For the moment virtualisation is not supported in
-		 * other areas so leave the access out.
-		 */
-		if (rc != 1) {
-			status[i] = rc;
-			result = -EFAULT;
-			continue;
-		}
-
-		status[i] = 0;
-		put_page(page[0]);
-	}
-
-	return result;
-}
-EXPORT_SYMBOL(pnv_npu2_handle_fault);
-
-int pnv_npu2_init(struct pnv_phb *phb)
-{
-	unsigned int i;
-	u64 mmio_atsd;
-	struct device_node *dn;
-	struct pci_dev *gpdev;
-	static int npu_index;
-	uint64_t rc = 0;
-
-	if (!atsd_threshold_dentry) {
-		atsd_threshold_dentry = debugfs_create_x64("atsd_threshold",
-				   0600, powerpc_debugfs_root, &atsd_threshold);
-	}
-
-	phb->npu.nmmu_flush =
-		of_property_read_bool(phb->hose->dn, "ibm,nmmu-flush");
-	for_each_child_of_node(phb->hose->dn, dn) {
-		gpdev = pnv_pci_get_gpu_dev(get_pci_dev(dn));
-		if (gpdev) {
-			rc = opal_npu_map_lpar(phb->opal_id,
-				PCI_DEVID(gpdev->bus->number, gpdev->devfn),
-				0, 0);
-			if (rc)
-				dev_err(&gpdev->dev,
-					"Error %lld mapping device to LPAR\n",
-					rc);
-		}
-	}
-
-	for (i = 0; !of_property_read_u64_index(phb->hose->dn, "ibm,mmio-atsd",
-							i, &mmio_atsd); i++)
-		phb->npu.mmio_atsd_regs[i] = ioremap(mmio_atsd, 32);
-
-	pr_info("NPU%lld: Found %d MMIO ATSD registers", phb->opal_id, i);
-	phb->npu.mmio_atsd_count = i;
-	phb->npu.mmio_atsd_usage = 0;
-	npu_index++;
-	if (WARN_ON(npu_index >= NV_MAX_NPUS))
-		return -ENOSPC;
-	max_npu2_index = npu_index;
-	phb->npu.index = npu_index;
-
-	return 0;
-}
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index 913175ba1c10..b6db65917bb4 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -1203,75 +1203,6 @@ static struct pnv_ioda_pe *pnv_ioda_setup_bus_PE(struct pci_bus *bus, bool all)
 	return pe;
 }
 
-static struct pnv_ioda_pe *pnv_ioda_setup_npu_PE(struct pci_dev *npu_pdev)
-{
-	int pe_num, found_pe = false, rc;
-	long rid;
-	struct pnv_ioda_pe *pe;
-	struct pci_dev *gpu_pdev;
-	struct pci_dn *npu_pdn;
-	struct pci_controller *hose = pci_bus_to_host(npu_pdev->bus);
-	struct pnv_phb *phb = hose->private_data;
-
-	/*
-	 * Due to a hardware errata PE#0 on the NPU is reserved for
-	 * error handling. This means we only have three PEs remaining
-	 * which need to be assigned to four links, implying some
-	 * links must share PEs.
-	 *
-	 * To achieve this we assign PEs such that NPUs linking the
-	 * same GPU get assigned the same PE.
-	 */
-	gpu_pdev = pnv_pci_get_gpu_dev(npu_pdev);
-	for (pe_num = 0; pe_num < phb->ioda.total_pe_num; pe_num++) {
-		pe = &phb->ioda.pe_array[pe_num];
-		if (!pe->pdev)
-			continue;
-
-		if (pnv_pci_get_gpu_dev(pe->pdev) == gpu_pdev) {
-			/*
-			 * This device has the same peer GPU so should
-			 * be assigned the same PE as the existing
-			 * peer NPU.
-			 */
-			dev_info(&npu_pdev->dev,
-				"Associating to existing PE %x\n", pe_num);
-			pci_dev_get(npu_pdev);
-			npu_pdn = pci_get_pdn(npu_pdev);
-			rid = npu_pdev->bus->number << 8 | npu_pdn->devfn;
-			npu_pdn->pe_number = pe_num;
-			phb->ioda.pe_rmap[rid] = pe->pe_number;
-
-			/* Map the PE to this link */
-			rc = opal_pci_set_pe(phb->opal_id, pe_num, rid,
-					OpalPciBusAll,
-					OPAL_COMPARE_RID_DEVICE_NUMBER,
-					OPAL_COMPARE_RID_FUNCTION_NUMBER,
-					OPAL_MAP_PE);
-			WARN_ON(rc != OPAL_SUCCESS);
-			found_pe = true;
-			break;
-		}
-	}
-
-	if (!found_pe)
-		/*
-		 * Could not find an existing PE so allocate a new
-		 * one.
-		 */
-		return pnv_ioda_setup_dev_PE(npu_pdev);
-	else
-		return pe;
-}
-
-static void pnv_ioda_setup_npu_PEs(struct pci_bus *bus)
-{
-	struct pci_dev *pdev;
-
-	list_for_each_entry(pdev, &bus->devices, bus_list)
-		pnv_ioda_setup_npu_PE(pdev);
-}
-
 static void pnv_pci_ioda_setup_PEs(void)
 {
 	struct pci_controller *hose, *tmp;
@@ -1281,13 +1212,6 @@ static void pnv_pci_ioda_setup_PEs(void)
 
 	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
 		phb = hose->private_data;
-		if (phb->type == PNV_PHB_NPU_NVLINK) {
-			/* PE#0 is needed for error reporting */
-			pnv_ioda_reserve_pe(phb, 0);
-			pnv_ioda_setup_npu_PEs(hose->bus);
-			if (phb->model == PNV_PHB_MODEL_NPU2)
-				pnv_npu2_init(phb);
-		}
 		if (phb->type == PNV_PHB_NPU_OCAPI) {
 			bus = hose->bus;
 			list_for_each_entry(pdev, &bus->devices, bus_list)
@@ -1871,9 +1795,6 @@ static int pnv_pci_ioda_dma_set_mask(struct pci_dev *pdev, u64 dma_mask)
 	}
 	*pdev->dev.dma_mask = dma_mask;
 
-	/* Update peer npu devices */
-	pnv_npu_try_dma_set_bypass(pdev, bypass);
-
 	return 0;
 }
 
@@ -2119,14 +2040,6 @@ static void pnv_pci_ioda2_tce_invalidate(struct iommu_table *tbl,
 	}
 }
 
-void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm)
-{
-	if (phb->model == PNV_PHB_MODEL_NPU || phb->model == PNV_PHB_MODEL_PHB3)
-		pnv_pci_phb3_tce_invalidate_entire(phb, rm);
-	else
-		opal_pci_tce_kill(phb->opal_id, OPAL_PCI_TCE_KILL, 0, 0, 0, 0);
-}
-
 static int pnv_ioda2_tce_build(struct iommu_table *tbl, long index,
 		long npages, unsigned long uaddr,
 		enum dma_data_direction direction,
@@ -2615,137 +2528,6 @@ static struct iommu_table_group_ops pnv_pci_ioda2_ops = {
 	.take_ownership = pnv_ioda2_take_ownership,
 	.release_ownership = pnv_ioda2_release_ownership,
 };
-
-static int gpe_table_group_to_npe_cb(struct device *dev, void *opaque)
-{
-	struct pci_controller *hose;
-	struct pnv_phb *phb;
-	struct pnv_ioda_pe **ptmppe = opaque;
-	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
-	struct pci_dn *pdn = pci_get_pdn(pdev);
-
-	if (!pdn || pdn->pe_number == IODA_INVALID_PE)
-		return 0;
-
-	hose = pci_bus_to_host(pdev->bus);
-	phb = hose->private_data;
-	if (phb->type != PNV_PHB_NPU_NVLINK)
-		return 0;
-
-	*ptmppe = &phb->ioda.pe_array[pdn->pe_number];
-
-	return 1;
-}
-
-/*
- * This returns PE of associated NPU.
- * This assumes that NPU is in the same IOMMU group with GPU and there is
- * no other PEs.
- */
-static struct pnv_ioda_pe *gpe_table_group_to_npe(
-		struct iommu_table_group *table_group)
-{
-	struct pnv_ioda_pe *npe = NULL;
-	int ret = iommu_group_for_each_dev(table_group->group, &npe,
-			gpe_table_group_to_npe_cb);
-
-	BUG_ON(!ret || !npe);
-
-	return npe;
-}
-
-static long pnv_pci_ioda2_npu_set_window(struct iommu_table_group *table_group,
-		int num, struct iommu_table *tbl)
-{
-	struct pnv_ioda_pe *npe = gpe_table_group_to_npe(table_group);
-	int num2 = (num == 0) ? 1 : 0;
-	long ret = pnv_pci_ioda2_set_window(table_group, num, tbl);
-
-	if (ret)
-		return ret;
-
-	if (table_group->tables[num2])
-		pnv_npu_unset_window(npe, num2);
-
-	ret = pnv_npu_set_window(npe, num, tbl);
-	if (ret) {
-		pnv_pci_ioda2_unset_window(table_group, num);
-		if (table_group->tables[num2])
-			pnv_npu_set_window(npe, num2,
-					table_group->tables[num2]);
-	}
-
-	return ret;
-}
-
-static long pnv_pci_ioda2_npu_unset_window(
-		struct iommu_table_group *table_group,
-		int num)
-{
-	struct pnv_ioda_pe *npe = gpe_table_group_to_npe(table_group);
-	int num2 = (num == 0) ? 1 : 0;
-	long ret = pnv_pci_ioda2_unset_window(table_group, num);
-
-	if (ret)
-		return ret;
-
-	if (!npe->table_group.tables[num])
-		return 0;
-
-	ret = pnv_npu_unset_window(npe, num);
-	if (ret)
-		return ret;
-
-	if (table_group->tables[num2])
-		ret = pnv_npu_set_window(npe, num2, table_group->tables[num2]);
-
-	return ret;
-}
-
-static void pnv_ioda2_npu_take_ownership(struct iommu_table_group *table_group)
-{
-	/*
-	 * Detach NPU first as pnv_ioda2_take_ownership() will destroy
-	 * the iommu_table if 32bit DMA is enabled.
-	 */
-	pnv_npu_take_ownership(gpe_table_group_to_npe(table_group));
-	pnv_ioda2_take_ownership(table_group);
-}
-
-static struct iommu_table_group_ops pnv_pci_ioda2_npu_ops = {
-	.get_table_size = pnv_pci_ioda2_get_table_size,
-	.create_table = pnv_pci_ioda2_create_table_userspace,
-	.set_window = pnv_pci_ioda2_npu_set_window,
-	.unset_window = pnv_pci_ioda2_npu_unset_window,
-	.take_ownership = pnv_ioda2_npu_take_ownership,
-	.release_ownership = pnv_ioda2_release_ownership,
-};
-
-static void pnv_pci_ioda_setup_iommu_api(void)
-{
-	struct pci_controller *hose, *tmp;
-	struct pnv_phb *phb;
-	struct pnv_ioda_pe *pe, *gpe;
-
-	/*
-	 * Now we have all PHBs discovered, time to add NPU devices to
-	 * the corresponding IOMMU groups.
-	 */
-	list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
-		phb = hose->private_data;
-
-		if (phb->type != PNV_PHB_NPU_NVLINK)
-			continue;
-
-		list_for_each_entry(pe, &phb->ioda.pe_list, list) {
-			gpe = pnv_pci_npu_setup_iommu(pe);
-			if (gpe)
-				gpe->table_group.ops = &pnv_pci_ioda2_npu_ops;
-		}
-	}
-}
-#else /* !CONFIG_IOMMU_API */
-static void pnv_pci_ioda_setup_iommu_api(void) { };
 #endif
 
 static unsigned long pnv_ioda_parse_tce_sizes(struct pnv_phb *phb)
@@ -3242,7 +3024,6 @@ static void pnv_pci_enable_bridges(void)
 static void pnv_pci_ioda_fixup(void)
 {
 	pnv_pci_ioda_setup_PEs();
-	pnv_pci_ioda_setup_iommu_api();
 	pnv_pci_ioda_create_dbgfs();
 
 	pnv_pci_enable_bridges();
@@ -3689,27 +3470,6 @@ static const struct pci_controller_ops pnv_pci_ioda_controller_ops = {
 	.shutdown		= pnv_pci_ioda_shutdown,
 };
 
-static int pnv_npu_dma_set_mask(struct pci_dev *npdev, u64 dma_mask)
-{
-	dev_err_once(&npdev->dev,
-			"%s operation unsupported for NVLink devices\n",
-			__func__);
-	return -EPERM;
-}
-
-static const struct pci_controller_ops pnv_npu_ioda_controller_ops = {
-	.dma_dev_setup		= pnv_pci_dma_dev_setup,
-#ifdef CONFIG_PCI_MSI
-	.setup_msi_irqs		= pnv_setup_msi_irqs,
-	.teardown_msi_irqs	= pnv_teardown_msi_irqs,
-#endif
-	.enable_device_hook	= pnv_pci_enable_device_hook,
-	.window_alignment	= pnv_pci_window_alignment,
-	.reset_secondary_bus	= pnv_pci_reset_secondary_bus,
-	.dma_set_mask		= pnv_npu_dma_set_mask,
-	.shutdown		= pnv_pci_ioda_shutdown,
-};
-
 static const struct pci_controller_ops pnv_npu_ocapi_ioda_controller_ops = {
 	.enable_device_hook	= pnv_pci_enable_device_hook,
 	.window_alignment	= pnv_pci_window_alignment,
@@ -3931,9 +3691,6 @@ static void __init pnv_pci_init_ioda_phb(struct device_node *np,
 	ppc_md.pcibios_fixup = pnv_pci_ioda_fixup;
 
 	switch (phb->type) {
-	case PNV_PHB_NPU_NVLINK:
-		hose->controller_ops = pnv_npu_ioda_controller_ops;
-		break;
 	case PNV_PHB_NPU_OCAPI:
 		hose->controller_ops = pnv_npu_ocapi_ioda_controller_ops;
 		break;
diff --git a/arch/powerpc/platforms/powernv/pci.h b/arch/powerpc/platforms/powernv/pci.h
index 8b37b28e3831..54f2935b7ac5 100644
--- a/arch/powerpc/platforms/powernv/pci.h
+++ b/arch/powerpc/platforms/powernv/pci.h
@@ -231,17 +231,6 @@ extern void pe_level_printk(const struct pnv_ioda_pe *pe, const char *level,
 #define pe_info(pe, fmt, ...)					\
 	pe_level_printk(pe, KERN_INFO, fmt, ##__VA_ARGS__)
 
-/* Nvlink functions */
-extern void pnv_npu_try_dma_set_bypass(struct pci_dev *gpdev, bool bypass);
-extern void pnv_pci_ioda2_tce_invalidate_entire(struct pnv_phb *phb, bool rm);
-extern struct pnv_ioda_pe *pnv_pci_npu_setup_iommu(struct pnv_ioda_pe *npe);
-extern long pnv_npu_set_window(struct pnv_ioda_pe *npe, int num,
-		struct iommu_table *tbl);
-extern long pnv_npu_unset_window(struct pnv_ioda_pe *npe, int num);
-extern void pnv_npu_take_ownership(struct pnv_ioda_pe *npe);
-extern void pnv_npu_release_ownership(struct pnv_ioda_pe *npe);
-extern int pnv_npu2_init(struct pnv_phb *phb);
-
 /* pci-ioda-tce.c */
 #define POWERNV_IOMMU_DEFAULT_LEVELS	1
 #define POWERNV_IOMMU_MAX_LEVELS	5
-- 
2.19.0


  parent reply	other threads:[~2018-10-09 13:26 UTC|newest]

Thread overview: 85+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-09 13:24 use generic DMA mapping code in powerpc V3 Christoph Hellwig
2018-10-09 13:24 ` Christoph Hellwig
2018-10-09 13:24 ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 01/33] powerpc: use mm zones more sensibly Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-15  0:47   ` Benjamin Herrenschmidt
2018-10-15  0:47     ` Benjamin Herrenschmidt
2018-10-15  0:47     ` Benjamin Herrenschmidt
2018-10-09 13:24 ` [PATCH 02/33] powerpc/dma: remove the unused ARCH_HAS_DMA_MMAP_COHERENT define Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 03/33] powerpc/dma: remove the unused ISA_DMA_THRESHOLD export Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 04/33] powerpc/dma: remove the unused dma_iommu_ops export Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 05/33] powerpc/dma: split the two __dma_alloc_coherent implementations Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 06/33] powerpc/dma: remove the no-op dma_nommu_unmap_{page,sg} routines Christoph Hellwig
2018-10-09 13:24   ` [PATCH 06/33] powerpc/dma: remove the no-op dma_nommu_unmap_{page, sg} routines Christoph Hellwig
2018-10-09 13:24 ` [PATCH 07/33] powerpc/dma: untangle vio_dma_mapping_ops from dma_iommu_ops Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 08/33] powerpc/dma: handle iommu bypass in dma_iommu_ops Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 09/33] powerpc/pseries: unwind dma_get_required_mask_pSeriesLP a bit Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 10/33] powerpc/pseries: use the generic iommu bypass code Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 11/33] powerpc/cell: move dma direct window setup out of dma_configure Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 12/33] powerpc/cell: use the generic iommu bypass code Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 13/33] powerpc/dart: remove dead cleanup code in iommu_init_early_dart Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 14/33] powerpc/dart: use the generic iommu bypass code Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 15/33] powerpc/powernv: remove pnv_pci_ioda_pe_single_vendor Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` Christoph Hellwig [this message]
2018-10-09 13:24   ` [PATCH 16/33] powerpc/powernv: remove dead npu-dma code Christoph Hellwig
2018-10-15  1:34   ` Alexey Kardashevskiy
2018-10-15  1:34     ` Alexey Kardashevskiy
2018-10-15  1:34     ` Alexey Kardashevskiy
2018-10-15  2:45     ` Benjamin Herrenschmidt
2018-10-15  2:45       ` Benjamin Herrenschmidt
2018-10-15  5:50     ` Christoph Hellwig
2018-10-15  5:50       ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 17/33] powerpc/powernv: use the generic iommu bypass code Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 18/33] powerpc/dma: stop overriding dma_get_required_mask Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 19/33] powerpc/pci: remove the dma_set_mask pci_controller ops methods Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 20/33] powerpc/dma: remove the iommu fallback for coherent allocations Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 21/33] powerpc/dma: remove get_pci_dma_ops Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 22/33] powerpc/dma: move pci_dma_dev_setup_swiotlb to fsl_pci.c Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 23/33] powerpc/dma: remove max_direct_dma_addr Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 24/33] powerpc/dma: fix an off-by-one in dma_capable Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 25/33] cxl: drop the dma_set_mask callback from vphb Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 26/33] powerpc/fsl_pci: simplify fsl_pci_dma_set_mask Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 27/33] dma-mapping, powerpc: simplify the arch dma_set_mask override Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 28/33] powerpc/dma: use phys_to_dma instead of get_dma_offset Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 29/33] powerpc/dma: remove get_dma_offset Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 30/33] powerpc/dma: remove set_dma_offset Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 31/33] powerpc/dma: remove dma_nommu_mmap_coherent Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:24 ` [PATCH 32/33] powerpc/dma: use generic direct and swiotlb ops Christoph Hellwig
2018-10-09 13:24   ` Christoph Hellwig
2018-10-09 13:25 ` [PATCH 33/33] powerpc/dma: trim the fat from <asm/dma-mapping.h> Christoph Hellwig
2018-10-09 13:25   ` Christoph Hellwig

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181009132500.17643-17-hch@lst.de \
    --to=hch@lst.de \
    --cc=benh@kernel.crashing.org \
    --cc=iommu@lists.linux-foundation.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mpe@ellerman.id.au \
    --cc=paulus@samba.org \
    --subject='Re: [PATCH 16/33] powerpc/powernv: remove dead npu-dma code' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.