All of lore.kernel.org
 help / color / mirror / Atom feed
From: AKASHI Takahiro <takahiro.akashi@linaro.org>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values
Date: Thu, 11 Oct 2018 20:11:40 +0900	[thread overview]
Message-ID: <20181011111140.29665-1-takahiro.akashi@linaro.org> (raw)

Currently, image's image_base points to an address where the image was
temporarily uploaded for further loading. Since efi_loader relocates
the image to final destination, image_base and image_size should reflect
that.

This bug was detected in UEFI SCT, "Loaded Image Protocol Test - test 2,"
which shows that 'Unload' function doesn't fit into a range suggested by
image_base and image_size.
	TestCase/UEFI/EFI/Protocol/LoadedImage/BlackBoxTest/
	LoadedImageBBTestMain.c:1002

Changes in this patch also includes:
* reverts a patch, "efi_loader: save image relocation address
  and size" since newly added fields are no longer needed.
* copy PE headers as well since those information will be needed
  for module loading, in particular, at gurb.
  (This bug was reported by Heinrich.)

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
---
 lib/efi_loader/efi_image_loader.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)

diff --git a/lib/efi_loader/efi_image_loader.c b/lib/efi_loader/efi_image_loader.c
index a18ce0a5705e..d1b6c0d3cdf2 100644
--- a/lib/efi_loader/efi_image_loader.c
+++ b/lib/efi_loader/efi_image_loader.c
@@ -59,10 +59,10 @@ static efi_status_t efi_print_image_info(struct efi_loaded_image_obj *obj,
 {
 	printf("UEFI image");
 	printf(" [0x%p:0x%p]",
-	       obj->reloc_base, obj->reloc_base + obj->reloc_size - 1);
-	if (pc && pc >= obj->reloc_base &&
-	    pc < obj->reloc_base + obj->reloc_size)
-		printf(" pc=0x%zx", pc - obj->reloc_base);
+	       image->image_base, image->image_base + image->image_size - 1);
+	if (pc && pc >= image->image_base &&
+	    pc < image->image_base + image->image_size)
+		printf(" pc=0x%zx", pc - image->image_base);
 	if (image->file_path)
 		printf(" '%pD'", image->file_path);
 	printf("\n");
@@ -212,7 +212,6 @@ void *efi_load_pe(struct efi_loaded_image_obj *handle, void *efi,
 	int rel_idx = IMAGE_DIRECTORY_ENTRY_BASERELOC;
 	void *entry;
 	uint64_t image_base;
-	uint64_t image_size;
 	unsigned long virt_size = 0;
 	int supported = 0;
 
@@ -256,7 +255,6 @@ void *efi_load_pe(struct efi_loaded_image_obj *handle, void *efi,
 		IMAGE_NT_HEADERS64 *nt64 = (void *)nt;
 		IMAGE_OPTIONAL_HEADER64 *opt = &nt64->OptionalHeader;
 		image_base = opt->ImageBase;
-		image_size = opt->SizeOfImage;
 		efi_set_code_and_data_type(loaded_image_info, opt->Subsystem);
 		efi_reloc = efi_alloc(virt_size,
 				      loaded_image_info->image_code_type);
@@ -272,7 +270,6 @@ void *efi_load_pe(struct efi_loaded_image_obj *handle, void *efi,
 	} else if (nt->OptionalHeader.Magic == IMAGE_NT_OPTIONAL_HDR32_MAGIC) {
 		IMAGE_OPTIONAL_HEADER32 *opt = &nt->OptionalHeader;
 		image_base = opt->ImageBase;
-		image_size = opt->SizeOfImage;
 		efi_set_code_and_data_type(loaded_image_info, opt->Subsystem);
 		efi_reloc = efi_alloc(virt_size,
 				      loaded_image_info->image_code_type);
@@ -291,6 +288,11 @@ void *efi_load_pe(struct efi_loaded_image_obj *handle, void *efi,
 		return NULL;
 	}
 
+	/* Copy PE headers */
+	memcpy(efi_reloc, efi, sizeof(*dos) + sizeof(*nt)
+			+ nt->FileHeader.SizeOfOptionalHeader
+			+ num_sections * sizeof(IMAGE_SECTION_HEADER));
+
 	/* Load sections into RAM */
 	for (i = num_sections - 1; i >= 0; i--) {
 		IMAGE_SECTION_HEADER *sec = &sections[i];
@@ -315,10 +317,8 @@ void *efi_load_pe(struct efi_loaded_image_obj *handle, void *efi,
 	invalidate_icache_all();
 
 	/* Populate the loaded image interface bits */
-	loaded_image_info->image_base = efi;
-	loaded_image_info->image_size = image_size;
-	handle->reloc_base = efi_reloc;
-	handle->reloc_size = virt_size;
+	loaded_image_info->image_base = efi_reloc;
+	loaded_image_info->image_size = virt_size;
 
 	return entry;
 }
-- 
2.19.0

             reply	other threads:[~2018-10-11 11:11 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-11 11:11 AKASHI Takahiro [this message]
2018-10-11 14:18 ` [U-Boot] [PATCH v2] efi_loader: set image_base and image_size to correct values Heinrich Schuchardt
2018-10-12  0:55   ` AKASHI Takahiro
2018-12-02 22:46     ` Alexander Graf
2018-12-03  8:26       ` AKASHI Takahiro
2018-12-14  1:18         ` AKASHI Takahiro
2019-03-21 20:24 ` Heinrich Schuchardt
2019-03-22  0:31   ` AKASHI Takahiro

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181011111140.29665-1-takahiro.akashi@linaro.org \
    --to=takahiro.akashi@linaro.org \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.