From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Hannes Reinecke To: Jens Axboe Cc: "Martin K. Petersen" , Christoph Hellwig , James Bottomley , linux-scsi@vger.kernel.org, linux-block@vger.kernel.org, Hannes Reinecke , Hannes Reinecke Subject: [PATCH 3/3] drivers/block: Remove DAC960 driver Date: Fri, 12 Oct 2018 09:15:48 +0200 Message-Id: <20181012071548.129113-4-hare@suse.de> In-Reply-To: <20181012071548.129113-1-hare@suse.de> References: <20181012071548.129113-1-hare@suse.de> List-ID: The DAC960 driver has been obsoleted by the myrb/myrs drivers, so it can be dropped. Signed-off-by: Hannes Reinecke --- Documentation/blockdev/README.DAC960 | 756 ---- drivers/block/DAC960.c | 7229 ---------------------------------- drivers/block/DAC960.h | 4414 --------------------- drivers/block/Kconfig | 12 - drivers/block/Makefile | 1 - 5 files changed, 12412 deletions(-) delete mode 100644 Documentation/blockdev/README.DAC960 delete mode 100644 drivers/block/DAC960.c delete mode 100644 drivers/block/DAC960.h diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960 deleted file mode 100644 index bd85fb9dc6e5..000000000000 --- a/Documentation/blockdev/README.DAC960 +++ /dev/null @@ -1,756 +0,0 @@ - Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers - - Version 2.2.11 for Linux 2.2.19 - Version 2.4.11 for Linux 2.4.12 - - PRODUCTION RELEASE - - 11 October 2001 - - Leonard N. Zubkoff - Dandelion Digital - lnz@dandelion.com - - Copyright 1998-2001 by Leonard N. Zubkoff - - - INTRODUCTION - -Mylex, Inc. designs and manufactures a variety of high performance PCI RAID -controllers. Mylex Corporation is located at 34551 Ardenwood Blvd., Fremont, -California 94555, USA and can be reached at 510.796.6100 or on the World Wide -Web at http://www.mylex.com. Mylex Technical Support can be reached by -electronic mail at mylexsup@us.ibm.com, by voice at 510.608.2400, or by FAX at -510.745.7715. Contact information for offices in Europe and Japan is available -on their Web site. - -The latest information on Linux support for DAC960 PCI RAID Controllers, as -well as the most recent release of this driver, will always be available from -my Linux Home Page at URL "http://www.dandelion.com/Linux/". The Linux DAC960 -driver supports all current Mylex PCI RAID controllers including the new -eXtremeRAID 2000/3000 and AcceleRAID 352/170/160 models which have an entirely -new firmware interface from the older eXtremeRAID 1100, AcceleRAID 150/200/250, -and DAC960PJ/PG/PU/PD/PL. See below for a complete controller list as well as -minimum firmware version requirements. For simplicity, in most places this -documentation refers to DAC960 generically rather than explicitly listing all -the supported models. - -Driver bug reports should be sent via electronic mail to "lnz@dandelion.com". -Please include with the bug report the complete configuration messages reported -by the driver at startup, along with any subsequent system messages relevant to -the controller's operation, and a detailed description of your system's -hardware configuration. Driver bugs are actually quite rare; if you encounter -problems with disks being marked offline, for example, please contact Mylex -Technical Support as the problem is related to the hardware configuration -rather than the Linux driver. - -Please consult the RAID controller documentation for detailed information -regarding installation and configuration of the controllers. This document -primarily provides information specific to the Linux support. - - - DRIVER FEATURES - -The DAC960 RAID controllers are supported solely as high performance RAID -controllers, not as interfaces to arbitrary SCSI devices. The Linux DAC960 -driver operates at the block device level, the same level as the SCSI and IDE -drivers. Unlike other RAID controllers currently supported on Linux, the -DAC960 driver is not dependent on the SCSI subsystem, and hence avoids all the -complexity and unnecessary code that would be associated with an implementation -as a SCSI driver. The DAC960 driver is designed for as high a performance as -possible with no compromises or extra code for compatibility with lower -performance devices. The DAC960 driver includes extensive error logging and -online configuration management capabilities. Except for initial configuration -of the controller and adding new disk drives, most everything can be handled -from Linux while the system is operational. - -The DAC960 driver is architected to support up to 8 controllers per system. -Each DAC960 parallel SCSI controller can support up to 15 disk drives per -channel, for a maximum of 60 drives on a four channel controller; the fibre -channel eXtremeRAID 3000 controller supports up to 125 disk drives per loop for -a total of 250 drives. The drives installed on a controller are divided into -one or more "Drive Groups", and then each Drive Group is subdivided further -into 1 to 32 "Logical Drives". Each Logical Drive has a specific RAID Level -and caching policy associated with it, and it appears to Linux as a single -block device. Logical Drives are further subdivided into up to 7 partitions -through the normal Linux and PC disk partitioning schemes. Logical Drives are -also known as "System Drives", and Drive Groups are also called "Packs". Both -terms are in use in the Mylex documentation; I have chosen to standardize on -the more generic "Logical Drive" and "Drive Group". - -DAC960 RAID disk devices are named in the style of the obsolete Device File -System (DEVFS). The device corresponding to Logical Drive D on Controller C -is referred to as /dev/rd/cCdD, and the partitions are called /dev/rd/cCdDp1 -through /dev/rd/cCdDp7. For example, partition 3 of Logical Drive 5 on -Controller 2 is referred to as /dev/rd/c2d5p3. Note that unlike with SCSI -disks the device names will not change in the event of a disk drive failure. -The DAC960 driver is assigned major numbers 48 - 55 with one major number per -controller. The 8 bits of minor number are divided into 5 bits for the Logical -Drive and 3 bits for the partition. - - - SUPPORTED DAC960/AcceleRAID/eXtremeRAID PCI RAID CONTROLLERS - -The following list comprises the supported DAC960, AcceleRAID, and eXtremeRAID -PCI RAID Controllers as of the date of this document. It is recommended that -anyone purchasing a Mylex PCI RAID Controller not in the following table -contact the author beforehand to verify that it is or will be supported. - -eXtremeRAID 3000 - 1 Wide Ultra-2/LVD SCSI channel - 2 External Fibre FC-AL channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -eXtremeRAID 2000 - 4 Wide Ultra-160 LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 352 - 2 Wide Ultra-160 LVD SCSI channels - 100MHz Intel i960RN RISC Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 32MB/64MB ECC SDRAM Memory - -AcceleRAID 170 - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RM RISC Processor - 16MB/32MB/64MB ECC SDRAM Memory - -AcceleRAID 160 (AcceleRAID 170LP) - 1 Wide Ultra-160 LVD SCSI channel - 100MHz Intel i960RS RISC Processor - Built in 16M ECC SDRAM Memory - PCI Low Profile Form Factor - fit for 2U height - -eXtremeRAID 1100 (DAC1164P) - 3 Wide Ultra-2/LVD SCSI channels - 233MHz StrongARM SA 110 Processor - 64 Bit 33MHz PCI (backward compatible with 32 Bit PCI slots) - 16MB/32MB/64MB Parity SDRAM Memory with Battery Backup - -AcceleRAID 250 (DAC960PTL1) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 200 (DAC960PTL0) - Uses onboard Symbios SCSI chips on certain motherboards - Includes no onboard SCSI Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -AcceleRAID 150 (DAC960PRL) - Uses onboard Symbios SCSI chips on certain motherboards - Also includes one onboard Wide Ultra-2/LVD SCSI Channel - 33MHz Intel i960RP RISC Processor - 4MB Parity EDO Memory - -DAC960PJ 1/2/3 Wide Ultra SCSI-3 Channels - 66MHz Intel i960RD RISC Processor - 4MB/8MB/16MB/32MB/64MB/128MB ECC EDO Memory - -DAC960PG 1/2/3 Wide Ultra SCSI-3 Channels - 33MHz Intel i960RP RISC Processor - 4MB/8MB ECC EDO Memory - -DAC960PU 1/2/3 Wide Ultra SCSI-3 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PD 1/2/3 Wide Fast SCSI-2 Channels - Intel i960CF RISC Processor - 4MB/8MB EDRAM or 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960PL 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -DAC960P 1/2/3 Wide Fast SCSI-2 Channels - Intel i960 RISC Processor - 2MB/4MB/8MB/16MB/32MB DRAM Memory - -For the eXtremeRAID 2000/3000 and AcceleRAID 352/170/160, firmware version -6.00-01 or above is required. - -For the eXtremeRAID 1100, firmware version 5.06-0-52 or above is required. - -For the AcceleRAID 250, 200, and 150, firmware version 4.06-0-57 or above is -required. - -For the DAC960PJ and DAC960PG, firmware version 4.06-0-00 or above is required. - -For the DAC960PU, DAC960PD, DAC960PL, and DAC960P, either firmware version -3.51-0-04 or above is required (for dual Flash ROM controllers), or firmware -version 2.73-0-00 or above is required (for single Flash ROM controllers) - -Please note that not all SCSI disk drives are suitable for use with DAC960 -controllers, and only particular firmware versions of any given model may -actually function correctly. Similarly, not all motherboards have a BIOS that -properly initializes the AcceleRAID 250, AcceleRAID 200, AcceleRAID 150, -DAC960PJ, and DAC960PG because the Intel i960RD/RP is a multi-function device. -If in doubt, contact Mylex RAID Technical Support (mylexsup@us.ibm.com) to -verify compatibility. Mylex makes available a hard disk compatibility list at -http://www.mylex.com/support/hdcomp/hd-lists.html. - - - DRIVER INSTALLATION - -This distribution was prepared for Linux kernel version 2.2.19 or 2.4.12. - -To install the DAC960 RAID driver, you may use the following commands, -replacing "/usr/src" with wherever you keep your Linux kernel source tree: - - cd /usr/src - tar -xvzf DAC960-2.2.11.tar.gz (or DAC960-2.4.11.tar.gz) - mv README.DAC960 linux/Documentation - mv DAC960.[ch] linux/drivers/block - patch -p0 < DAC960.patch (if DAC960.patch is included) - cd linux - make config - make bzImage (or zImage) - -Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your -standard kernel, run lilo if appropriate, and reboot. - -To create the necessary devices in /dev, the "make_rd" script included in -"DAC960-Utilities.tar.gz" from http://www.dandelion.com/Linux/ may be used. -LILO 21 and FDISK v2.9 include DAC960 support; also included in this archive -are patches to LILO 20 and FDISK v2.8 that add DAC960 support, along with -statically linked executables of LILO and FDISK. This modified version of LILO -will allow booting from a DAC960 controller and/or mounting the root file -system from a DAC960. - -Red Hat Linux 6.0 and SuSE Linux 6.1 include support for Mylex PCI RAID -controllers. Installing directly onto a DAC960 may be problematic from other -Linux distributions until their installation utilities are updated. - - - INSTALLATION NOTES - -Before installing Linux or adding DAC960 logical drives to an existing Linux -system, the controller must first be configured to provide one or more logical -drives using the BIOS Configuration Utility or DACCF. Please note that since -there are only at most 6 usable partitions on each logical drive, systems -requiring more partitions should subdivide a drive group into multiple logical -drives, each of which can have up to 6 usable partitions. Also, note that with -large disk arrays it is advisable to enable the 8GB BIOS Geometry (255/63) -rather than accepting the default 2GB BIOS Geometry (128/32); failing to so do -will cause the logical drive geometry to have more than 65535 cylinders which -will make it impossible for FDISK to be used properly. The 8GB BIOS Geometry -can be enabled by configuring the DAC960 BIOS, which is accessible via Alt-M -during the BIOS initialization sequence. - -For maximum performance and the most efficient E2FSCK performance, it is -recommended that EXT2 file systems be built with a 4KB block size and 16 block -stride to match the DAC960 controller's 64KB default stripe size. The command -"mke2fs -b 4096 -R stride=16 " is appropriate. Unless there will be a -large number of small files on the file systems, it is also beneficial to add -the "-i 16384" option to increase the bytes per inode parameter thereby -reducing the file system metadata. Finally, on systems that will only be run -with Linux 2.2 or later kernels it is beneficial to enable sparse superblocks -with the "-s 1" option. - - - DAC960 ANNOUNCEMENTS MAILING LIST - -The DAC960 Announcements Mailing List provides a forum for informing Linux -users of new driver releases and other announcements regarding Linux support -for DAC960 PCI RAID Controllers. To join the mailing list, send a message to -"dac960-announce-request@dandelion.com" with the line "subscribe" in the -message body. - - - CONTROLLER CONFIGURATION AND STATUS MONITORING - -The DAC960 RAID controllers running firmware 4.06 or above include a Background -Initialization facility so that system downtime is minimized both for initial -installation and subsequent configuration of additional storage. The BIOS -Configuration Utility (accessible via Alt-R during the BIOS initialization -sequence) is used to quickly configure the controller, and then the logical -drives that have been created are available for immediate use even while they -are still being initialized by the controller. The primary need for online -configuration and status monitoring is then to avoid system downtime when disk -drives fail and must be replaced. Mylex's online monitoring and configuration -utilities are being ported to Linux and will become available at some point in -the future. Note that with a SAF-TE (SCSI Accessed Fault-Tolerant Enclosure) -enclosure, the controller is able to rebuild failed drives automatically as -soon as a drive replacement is made available. - -The primary interfaces for controller configuration and status monitoring are -special files created in the /proc/rd/... hierarchy along with the normal -system console logging mechanism. Whenever the system is operating, the DAC960 -driver queries each controller for status information every 10 seconds, and -checks for additional conditions every 60 seconds. The initial status of each -controller is always available for controller N in /proc/rd/cN/initial_status, -and the current status as of the last status monitoring query is available in -/proc/rd/cN/current_status. In addition, status changes are also logged by the -driver to the system console and will appear in the log files maintained by -syslog. The progress of asynchronous rebuild or consistency check operations -is also available in /proc/rd/cN/current_status, and progress messages are -logged to the system console at most every 60 seconds. - -Starting with the 2.2.3/2.0.3 versions of the driver, the status information -available in /proc/rd/cN/initial_status and /proc/rd/cN/current_status has been -augmented to include the vendor, model, revision, and serial number (if -available) for each physical device found connected to the controller: - -***** DAC960 RAID Driver Version 2.2.3 of 19 August 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PRL PCI RAID Controller - Firmware Version: 4.07-0-07, Channels: 1, Memory Size: 16MB - PCI Bus: 1, Device: 4, Function: 1, I/O Address: Unassigned - PCI Address: 0xFE300000 mapped at 0xA0800000, IRQ Channel: 21 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - SAF-TE Enclosure Management Enabled - Physical Devices: - 0:0 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68016775HA - Disk Status: Online, 17928192 blocks - 0:1 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68004E53HA - Disk Status: Online, 17928192 blocks - 0:2 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13013935HA - Disk Status: Online, 17928192 blocks - 0:3 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 13016897HA - Disk Status: Online, 17928192 blocks - 0:4 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68019905HA - Disk Status: Online, 17928192 blocks - 0:5 Vendor: IBM Model: DRVS09D Revision: 0270 - Serial Number: 68012753HA - Disk Status: Online, 17928192 blocks - 0:6 Vendor: ESG-SHV Model: SCA HSBP M6 Revision: 0.61 - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 89640960 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -To simplify the monitoring process for custom software, the special file -/proc/rd/status returns "OK" when all DAC960 controllers in the system are -operating normally and no failures have occurred, or "ALERT" if any logical -drives are offline or critical or any non-standby physical drives are dead. - -Configuration commands for controller N are available via the special file -/proc/rd/cN/user_command. A human readable command can be written to this -special file to initiate a configuration operation, and the results of the -operation can then be read back from the special file in addition to being -logged to the system console. The shell command sequence - - echo "" > /proc/rd/c0/user_command - cat /proc/rd/c0/user_command - -is typically used to execute configuration commands. The configuration -commands are: - - flush-cache - - The "flush-cache" command flushes the controller's cache. The system - automatically flushes the cache at shutdown or if the driver module is - unloaded, so this command is only needed to be certain a write back cache - is flushed to disk before the system is powered off by a command to a UPS. - Note that the flush-cache command also stops an asynchronous rebuild or - consistency check, so it should not be used except when the system is being - halted. - - kill : - - The "kill" command marks the physical drive : as DEAD. - This command is provided primarily for testing, and should not be used - during normal system operation. - - make-online : - - The "make-online" command changes the physical drive : - from status DEAD to status ONLINE. In cases where multiple physical drives - have been killed simultaneously, this command may be used to bring all but - one of them back online, after which a rebuild to the final drive is - necessary. - - Warning: make-online should only be used on a dead physical drive that is - an active part of a drive group, never on a standby drive. The command - should never be used on a dead drive that is part of a critical logical - drive; rebuild should be used if only a single drive is dead. - - make-standby : - - The "make-standby" command changes physical drive : - from status DEAD to status STANDBY. It should only be used in cases where - a dead drive was replaced after an automatic rebuild was performed onto a - standby drive. It cannot be used to add a standby drive to the controller - configuration if one was not created initially; the BIOS Configuration - Utility must be used for that currently. - - rebuild : - - The "rebuild" command initiates an asynchronous rebuild onto physical drive - :. It should only be used when a dead drive has been - replaced. - - check-consistency - - The "check-consistency" command initiates an asynchronous consistency check - of with automatic restoration. It can be used - whenever it is desired to verify the consistency of the redundancy - information. - - cancel-rebuild - cancel-consistency-check - - The "cancel-rebuild" and "cancel-consistency-check" commands cancel any - rebuild or consistency check operations previously initiated. - - - EXAMPLE I - DRIVE FAILURE WITHOUT A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group without a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:1 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages indicating that Logical -Drives 0 and 1 are now CRITICAL as a result of Physical Drive 1:1 being DEAD: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:1 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:1 is now DEAD -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -The Sense Keys logged here are just Check Condition / Unit Attention conditions -arising from a SCSI bus reset that is forced by the controller during its error -recovery procedures. Concurrently with the above, the driver status available -from /proc/rd also reflects the drive failure. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Dead, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -Since there are no standby drives configured, the system can continue to access -the logical drives in a performance degraded mode until the failed drive is -replaced and a rebuild operation completed to restore the redundancy of the -logical drives. Once Physical Drive 1:1 is replaced with a properly -functioning drive, or if the physical drive was killed without having failed -(e.g., due to electrical problems on the SCSI bus), the user can instruct the -controller to initiate a rebuild operation onto the newly replaced drive: - -gwynedd:/u/lnz# echo "rebuild 1:1" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Rebuild of Physical Drive 1:1 Initiated - -The echo command instructs the controller to initiate an asynchronous rebuild -operation onto Physical Drive 1:1, and the status message that results from the -operation is then available for reading from /proc/rd/c0/user_command, as well -as being logged to the console by the driver. - -Within 10 seconds of this command the driver logs the initiation of the -asynchronous rebuild operation: - -DAC960#0: Rebuild of Physical Drive 1:1 Initiated -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:1 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 1% completed - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 6% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Write-Only, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 3305472 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 15% completed - -and every minute a progress message is logged to the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 32% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 63% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 94% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 94% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:1 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 5498880 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 3305472 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - - - EXAMPLE II - DRIVE FAILURE WITH A STANDBY DRIVE - -The following annotated logs demonstrate the controller configuration and and -online status monitoring capabilities of the Linux DAC960 Driver. The test -configuration comprises 6 1GB Quantum Atlas I disk drives on two channels of a -DAC960PJ controller. The physical drives are configured into a single drive -group with a standby drive, and the drive group has been configured into two -logical drives, one RAID-5 and one RAID-6. Note that these logs are from an -earlier version of the driver and the messages have changed somewhat with newer -releases, but the functionality remains similar. First, here is the current -status of the RAID configuration: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Online, 2201600 blocks - 1:3 - Disk: Standby, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - No Rebuild or Consistency Check in Progress - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -The above messages indicate that everything is healthy, and /proc/rd/status -returns "OK" indicating that there are no problems with any DAC960 controller -in the system. For demonstration purposes, while I/O is active Physical Drive -1:2 is now disconnected, simulating a drive failure. The failure is noted by -the driver within 10 seconds of the controller's having detected it, and the -driver logs the following console status messages: - -DAC960#0: Physical Drive 1:1 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:3 Error Log: Sense Key = 6, ASC = 29, ASCQ = 02 -DAC960#0: Physical Drive 1:2 killed because of timeout on SCSI command -DAC960#0: Physical Drive 1:2 is now DEAD -DAC960#0: Physical Drive 1:2 killed because it was removed -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now CRITICAL -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now CRITICAL - -Since a standby drive is configured, the controller automatically begins -rebuilding onto the standby drive: - -DAC960#0: Physical Drive 1:3 is now WRITE-ONLY -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -Concurrently with the above, the driver status available from /proc/rd also -reflects the drive failure and automatic rebuild. The status message in -/proc/rd/status has changed from "OK" to "ALERT": - -gwynedd:/u/lnz# cat /proc/rd/status -ALERT - -and /proc/rd/c0/current_status has been updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 4% completed - -As the rebuild progresses, the current status in /proc/rd/c0/current_status is -updated every 10 seconds: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Write-Only, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Critical, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Critical, 2754560 blocks, Write Thru - Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed - -and every minute a progress message is logged on the console by the driver: - -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 40% completed -DAC960#0: Rebuild in Progress: Logical Drive 0 (/dev/rd/c0d0) 76% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 66% completed -DAC960#0: Rebuild in Progress: Logical Drive 1 (/dev/rd/c0d1) 84% completed - -Finally, the rebuild completes successfully. The driver logs the status of the -logical and physical drives and the rebuild completion: - -DAC960#0: Rebuild Completed Successfully -DAC960#0: Physical Drive 1:3 is now ONLINE -DAC960#0: Logical Drive 0 (/dev/rd/c0d0) is now ONLINE -DAC960#0: Logical Drive 1 (/dev/rd/c0d1) is now ONLINE - -/proc/rd/c0/current_status is updated: - -***** DAC960 RAID Driver Version 2.0.0 of 23 March 1999 ***** -Copyright 1998-1999 by Leonard N. Zubkoff -Configuring Mylex DAC960PJ PCI RAID Controller - Firmware Version: 4.06-0-08, Channels: 3, Memory Size: 8MB - PCI Bus: 0, Device: 19, Function: 1, I/O Address: Unassigned - PCI Address: 0xFD4FC000 mapped at 0x8807000, IRQ Channel: 9 - Controller Queue Depth: 128, Maximum Blocks per Command: 128 - Driver Queue Depth: 127, Maximum Scatter/Gather Segments: 33 - Stripe Size: 64KB, Segment Size: 8KB, BIOS Geometry: 255/63 - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Dead, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully - -and /proc/rd/status indicates that everything is healthy once again: - -gwynedd:/u/lnz# cat /proc/rd/status -OK - -Note that the absence of a viable standby drive does not create an "ALERT" -status. Once dead Physical Drive 1:2 has been replaced, the controller must be -told that this has occurred and that the newly replaced drive should become the -new standby drive: - -gwynedd:/u/lnz# echo "make-standby 1:2" > /proc/rd/c0/user_command -gwynedd:/u/lnz# cat /proc/rd/c0/user_command -Make Standby of Physical Drive 1:2 Succeeded - -The echo command instructs the controller to make Physical Drive 1:2 into a -standby drive, and the status message that results from the operation is then -available for reading from /proc/rd/c0/user_command, as well as being logged to -the console by the driver. Within 60 seconds of this command the driver logs: - -DAC960#0: Physical Drive 1:2 Error Log: Sense Key = 6, ASC = 29, ASCQ = 01 -DAC960#0: Physical Drive 1:2 is now STANDBY -DAC960#0: Make Standby of Physical Drive 1:2 Succeeded - -and /proc/rd/c0/current_status is updated: - -gwynedd:/u/lnz# cat /proc/rd/c0/current_status - ... - Physical Devices: - 0:1 - Disk: Online, 2201600 blocks - 0:2 - Disk: Online, 2201600 blocks - 0:3 - Disk: Online, 2201600 blocks - 1:1 - Disk: Online, 2201600 blocks - 1:2 - Disk: Standby, 2201600 blocks - 1:3 - Disk: Online, 2201600 blocks - Logical Drives: - /dev/rd/c0d0: RAID-5, Online, 4399104 blocks, Write Thru - /dev/rd/c0d1: RAID-6, Online, 2754560 blocks, Write Thru - Rebuild Completed Successfully diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c deleted file mode 100644 index 581312ac375f..000000000000 --- a/drivers/block/DAC960.c +++ /dev/null @@ -1,7229 +0,0 @@ -/* - - Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers - - Copyright 1998-2001 by Leonard N. Zubkoff - Portions Copyright 2002 by Mylex (An IBM Business Unit) - - This program is free software; you may redistribute and/or modify it under - the terms of the GNU General Public License Version 2 as published by the - Free Software Foundation. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY - or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for complete details. - -*/ - - -#define DAC960_DriverVersion "2.5.49" -#define DAC960_DriverDate "21 Aug 2007" - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "DAC960.h" - -#define DAC960_GAM_MINOR 252 - - -static DEFINE_MUTEX(DAC960_mutex); -static DAC960_Controller_T *DAC960_Controllers[DAC960_MaxControllers]; -static int DAC960_ControllerCount; -static struct proc_dir_entry *DAC960_ProcDirectoryEntry; - -static long disk_size(DAC960_Controller_T *p, int drive_nr) -{ - if (p->FirmwareType == DAC960_V1_Controller) { - if (drive_nr >= p->LogicalDriveCount) - return 0; - return p->V1.LogicalDriveInformation[drive_nr]. - LogicalDriveSize; - } else { - DAC960_V2_LogicalDeviceInfo_T *i = - p->V2.LogicalDeviceInformation[drive_nr]; - if (i == NULL) - return 0; - return i->ConfigurableDeviceSize; - } -} - -static int DAC960_open(struct block_device *bdev, fmode_t mode) -{ - struct gendisk *disk = bdev->bd_disk; - DAC960_Controller_T *p = disk->queue->queuedata; - int drive_nr = (long)disk->private_data; - int ret = -ENXIO; - - mutex_lock(&DAC960_mutex); - if (p->FirmwareType == DAC960_V1_Controller) { - if (p->V1.LogicalDriveInformation[drive_nr]. - LogicalDriveState == DAC960_V1_LogicalDrive_Offline) - goto out; - } else { - DAC960_V2_LogicalDeviceInfo_T *i = - p->V2.LogicalDeviceInformation[drive_nr]; - if (!i || i->LogicalDeviceState == DAC960_V2_LogicalDevice_Offline) - goto out; - } - - check_disk_change(bdev); - - if (!get_capacity(p->disks[drive_nr])) - goto out; - ret = 0; -out: - mutex_unlock(&DAC960_mutex); - return ret; -} - -static int DAC960_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct gendisk *disk = bdev->bd_disk; - DAC960_Controller_T *p = disk->queue->queuedata; - int drive_nr = (long)disk->private_data; - - if (p->FirmwareType == DAC960_V1_Controller) { - geo->heads = p->V1.GeometryTranslationHeads; - geo->sectors = p->V1.GeometryTranslationSectors; - geo->cylinders = p->V1.LogicalDriveInformation[drive_nr]. - LogicalDriveSize / (geo->heads * geo->sectors); - } else { - DAC960_V2_LogicalDeviceInfo_T *i = - p->V2.LogicalDeviceInformation[drive_nr]; - switch (i->DriveGeometry) { - case DAC960_V2_Geometry_128_32: - geo->heads = 128; - geo->sectors = 32; - break; - case DAC960_V2_Geometry_255_63: - geo->heads = 255; - geo->sectors = 63; - break; - default: - DAC960_Error("Illegal Logical Device Geometry %d\n", - p, i->DriveGeometry); - return -EINVAL; - } - - geo->cylinders = i->ConfigurableDeviceSize / - (geo->heads * geo->sectors); - } - - return 0; -} - -static unsigned int DAC960_check_events(struct gendisk *disk, - unsigned int clearing) -{ - DAC960_Controller_T *p = disk->queue->queuedata; - int drive_nr = (long)disk->private_data; - - if (!p->LogicalDriveInitiallyAccessible[drive_nr]) - return DISK_EVENT_MEDIA_CHANGE; - return 0; -} - -static int DAC960_revalidate_disk(struct gendisk *disk) -{ - DAC960_Controller_T *p = disk->queue->queuedata; - int unit = (long)disk->private_data; - - set_capacity(disk, disk_size(p, unit)); - return 0; -} - -static const struct block_device_operations DAC960_BlockDeviceOperations = { - .owner = THIS_MODULE, - .open = DAC960_open, - .getgeo = DAC960_getgeo, - .check_events = DAC960_check_events, - .revalidate_disk = DAC960_revalidate_disk, -}; - - -/* - DAC960_AnnounceDriver announces the Driver Version and Date, Author's Name, - Copyright Notice, and Electronic Mail Address. -*/ - -static void DAC960_AnnounceDriver(DAC960_Controller_T *Controller) -{ - DAC960_Announce("***** DAC960 RAID Driver Version " - DAC960_DriverVersion " of " - DAC960_DriverDate " *****\n", Controller); - DAC960_Announce("Copyright 1998-2001 by Leonard N. Zubkoff " - "\n", Controller); -} - - -/* - DAC960_Failure prints a standardized error message, and then returns false. -*/ - -static bool DAC960_Failure(DAC960_Controller_T *Controller, - unsigned char *ErrorMessage) -{ - DAC960_Error("While configuring DAC960 PCI RAID Controller at\n", - Controller); - if (Controller->IO_Address == 0) - DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A " - "PCI Address 0x%X\n", Controller, - Controller->Bus, Controller->Device, - Controller->Function, Controller->PCI_Address); - else DAC960_Error("PCI Bus %d Device %d Function %d I/O Address " - "0x%X PCI Address 0x%X\n", Controller, - Controller->Bus, Controller->Device, - Controller->Function, Controller->IO_Address, - Controller->PCI_Address); - DAC960_Error("%s FAILED - DETACHING\n", Controller, ErrorMessage); - return false; -} - -/* - init_dma_loaf() and slice_dma_loaf() are helper functions for - aggregating the dma-mapped memory for a well-known collection of - data structures that are of different lengths. - - These routines don't guarantee any alignment. The caller must - include any space needed for alignment in the sizes of the structures - that are passed in. - */ - -static bool init_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf, - size_t len) -{ - void *cpu_addr; - dma_addr_t dma_handle; - - cpu_addr = pci_alloc_consistent(dev, len, &dma_handle); - if (cpu_addr == NULL) - return false; - - loaf->cpu_free = loaf->cpu_base = cpu_addr; - loaf->dma_free =loaf->dma_base = dma_handle; - loaf->length = len; - memset(cpu_addr, 0, len); - return true; -} - -static void *slice_dma_loaf(struct dma_loaf *loaf, size_t len, - dma_addr_t *dma_handle) -{ - void *cpu_end = loaf->cpu_free + len; - void *cpu_addr = loaf->cpu_free; - - BUG_ON(cpu_end > loaf->cpu_base + loaf->length); - *dma_handle = loaf->dma_free; - loaf->cpu_free = cpu_end; - loaf->dma_free += len; - return cpu_addr; -} - -static void free_dma_loaf(struct pci_dev *dev, struct dma_loaf *loaf_handle) -{ - if (loaf_handle->cpu_base != NULL) - pci_free_consistent(dev, loaf_handle->length, - loaf_handle->cpu_base, loaf_handle->dma_base); -} - - -/* - DAC960_CreateAuxiliaryStructures allocates and initializes the auxiliary - data structures for Controller. It returns true on success and false on - failure. -*/ - -static bool DAC960_CreateAuxiliaryStructures(DAC960_Controller_T *Controller) -{ - int CommandAllocationLength, CommandAllocationGroupSize; - int CommandsRemaining = 0, CommandIdentifier, CommandGroupByteCount; - void *AllocationPointer = NULL; - void *ScatterGatherCPU = NULL; - dma_addr_t ScatterGatherDMA; - struct dma_pool *ScatterGatherPool; - void *RequestSenseCPU = NULL; - dma_addr_t RequestSenseDMA; - struct dma_pool *RequestSensePool = NULL; - - if (Controller->FirmwareType == DAC960_V1_Controller) - { - CommandAllocationLength = offsetof(DAC960_Command_T, V1.EndMarker); - CommandAllocationGroupSize = DAC960_V1_CommandAllocationGroupSize; - ScatterGatherPool = dma_pool_create("DAC960_V1_ScatterGather", - &Controller->PCIDevice->dev, - DAC960_V1_ScatterGatherLimit * sizeof(DAC960_V1_ScatterGatherSegment_T), - sizeof(DAC960_V1_ScatterGatherSegment_T), 0); - if (ScatterGatherPool == NULL) - return DAC960_Failure(Controller, - "AUXILIARY STRUCTURE CREATION (SG)"); - Controller->ScatterGatherPool = ScatterGatherPool; - } - else - { - CommandAllocationLength = offsetof(DAC960_Command_T, V2.EndMarker); - CommandAllocationGroupSize = DAC960_V2_CommandAllocationGroupSize; - ScatterGatherPool = dma_pool_create("DAC960_V2_ScatterGather", - &Controller->PCIDevice->dev, - DAC960_V2_ScatterGatherLimit * sizeof(DAC960_V2_ScatterGatherSegment_T), - sizeof(DAC960_V2_ScatterGatherSegment_T), 0); - if (ScatterGatherPool == NULL) - return DAC960_Failure(Controller, - "AUXILIARY STRUCTURE CREATION (SG)"); - RequestSensePool = dma_pool_create("DAC960_V2_RequestSense", - &Controller->PCIDevice->dev, sizeof(DAC960_SCSI_RequestSense_T), - sizeof(int), 0); - if (RequestSensePool == NULL) { - dma_pool_destroy(ScatterGatherPool); - return DAC960_Failure(Controller, - "AUXILIARY STRUCTURE CREATION (SG)"); - } - Controller->ScatterGatherPool = ScatterGatherPool; - Controller->V2.RequestSensePool = RequestSensePool; - } - Controller->CommandAllocationGroupSize = CommandAllocationGroupSize; - Controller->FreeCommands = NULL; - for (CommandIdentifier = 1; - CommandIdentifier <= Controller->DriverQueueDepth; - CommandIdentifier++) - { - DAC960_Command_T *Command; - if (--CommandsRemaining <= 0) - { - CommandsRemaining = - Controller->DriverQueueDepth - CommandIdentifier + 1; - if (CommandsRemaining > CommandAllocationGroupSize) - CommandsRemaining = CommandAllocationGroupSize; - CommandGroupByteCount = - CommandsRemaining * CommandAllocationLength; - AllocationPointer = kzalloc(CommandGroupByteCount, GFP_ATOMIC); - if (AllocationPointer == NULL) - return DAC960_Failure(Controller, - "AUXILIARY STRUCTURE CREATION"); - } - Command = (DAC960_Command_T *) AllocationPointer; - AllocationPointer += CommandAllocationLength; - Command->CommandIdentifier = CommandIdentifier; - Command->Controller = Controller; - Command->Next = Controller->FreeCommands; - Controller->FreeCommands = Command; - Controller->Commands[CommandIdentifier-1] = Command; - ScatterGatherCPU = dma_pool_alloc(ScatterGatherPool, GFP_ATOMIC, - &ScatterGatherDMA); - if (ScatterGatherCPU == NULL) - return DAC960_Failure(Controller, "AUXILIARY STRUCTURE CREATION"); - - if (RequestSensePool != NULL) { - RequestSenseCPU = dma_pool_alloc(RequestSensePool, GFP_ATOMIC, - &RequestSenseDMA); - if (RequestSenseCPU == NULL) { - dma_pool_free(ScatterGatherPool, ScatterGatherCPU, - ScatterGatherDMA); - return DAC960_Failure(Controller, - "AUXILIARY STRUCTURE CREATION"); - } - } - if (Controller->FirmwareType == DAC960_V1_Controller) { - Command->cmd_sglist = Command->V1.ScatterList; - Command->V1.ScatterGatherList = - (DAC960_V1_ScatterGatherSegment_T *)ScatterGatherCPU; - Command->V1.ScatterGatherListDMA = ScatterGatherDMA; - sg_init_table(Command->cmd_sglist, DAC960_V1_ScatterGatherLimit); - } else { - Command->cmd_sglist = Command->V2.ScatterList; - Command->V2.ScatterGatherList = - (DAC960_V2_ScatterGatherSegment_T *)ScatterGatherCPU; - Command->V2.ScatterGatherListDMA = ScatterGatherDMA; - Command->V2.RequestSense = - (DAC960_SCSI_RequestSense_T *)RequestSenseCPU; - Command->V2.RequestSenseDMA = RequestSenseDMA; - sg_init_table(Command->cmd_sglist, DAC960_V2_ScatterGatherLimit); - } - } - return true; -} - - -/* - DAC960_DestroyAuxiliaryStructures deallocates the auxiliary data - structures for Controller. -*/ - -static void DAC960_DestroyAuxiliaryStructures(DAC960_Controller_T *Controller) -{ - int i; - struct dma_pool *ScatterGatherPool = Controller->ScatterGatherPool; - struct dma_pool *RequestSensePool = NULL; - void *ScatterGatherCPU; - dma_addr_t ScatterGatherDMA; - void *RequestSenseCPU; - dma_addr_t RequestSenseDMA; - DAC960_Command_T *CommandGroup = NULL; - - - if (Controller->FirmwareType == DAC960_V2_Controller) - RequestSensePool = Controller->V2.RequestSensePool; - - Controller->FreeCommands = NULL; - for (i = 0; i < Controller->DriverQueueDepth; i++) - { - DAC960_Command_T *Command = Controller->Commands[i]; - - if (Command == NULL) - continue; - - if (Controller->FirmwareType == DAC960_V1_Controller) { - ScatterGatherCPU = (void *)Command->V1.ScatterGatherList; - ScatterGatherDMA = Command->V1.ScatterGatherListDMA; - RequestSenseCPU = NULL; - RequestSenseDMA = (dma_addr_t)0; - } else { - ScatterGatherCPU = (void *)Command->V2.ScatterGatherList; - ScatterGatherDMA = Command->V2.ScatterGatherListDMA; - RequestSenseCPU = (void *)Command->V2.RequestSense; - RequestSenseDMA = Command->V2.RequestSenseDMA; - } - if (ScatterGatherCPU != NULL) - dma_pool_free(ScatterGatherPool, ScatterGatherCPU, ScatterGatherDMA); - if (RequestSenseCPU != NULL) - dma_pool_free(RequestSensePool, RequestSenseCPU, RequestSenseDMA); - - if ((Command->CommandIdentifier - % Controller->CommandAllocationGroupSize) == 1) { - /* - * We can't free the group of commands until all of the - * request sense and scatter gather dma structures are free. - * Remember the beginning of the group, but don't free it - * until we've reached the beginning of the next group. - */ - kfree(CommandGroup); - CommandGroup = Command; - } - Controller->Commands[i] = NULL; - } - kfree(CommandGroup); - - if (Controller->CombinedStatusBuffer != NULL) - { - kfree(Controller->CombinedStatusBuffer); - Controller->CombinedStatusBuffer = NULL; - Controller->CurrentStatusBuffer = NULL; - } - - dma_pool_destroy(ScatterGatherPool); - if (Controller->FirmwareType == DAC960_V1_Controller) - return; - - dma_pool_destroy(RequestSensePool); - - for (i = 0; i < DAC960_MaxLogicalDrives; i++) { - kfree(Controller->V2.LogicalDeviceInformation[i]); - Controller->V2.LogicalDeviceInformation[i] = NULL; - } - - for (i = 0; i < DAC960_V2_MaxPhysicalDevices; i++) - { - kfree(Controller->V2.PhysicalDeviceInformation[i]); - Controller->V2.PhysicalDeviceInformation[i] = NULL; - kfree(Controller->V2.InquiryUnitSerialNumber[i]); - Controller->V2.InquiryUnitSerialNumber[i] = NULL; - } -} - - -/* - DAC960_V1_ClearCommand clears critical fields of Command for DAC960 V1 - Firmware Controllers. -*/ - -static inline void DAC960_V1_ClearCommand(DAC960_Command_T *Command) -{ - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - memset(CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T)); - Command->V1.CommandStatus = 0; -} - - -/* - DAC960_V2_ClearCommand clears critical fields of Command for DAC960 V2 - Firmware Controllers. -*/ - -static inline void DAC960_V2_ClearCommand(DAC960_Command_T *Command) -{ - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T)); - Command->V2.CommandStatus = 0; -} - - -/* - DAC960_AllocateCommand allocates a Command structure from Controller's - free list. During driver initialization, a special initialization command - has been placed on the free list to guarantee that command allocation can - never fail. -*/ - -static inline DAC960_Command_T *DAC960_AllocateCommand(DAC960_Controller_T - *Controller) -{ - DAC960_Command_T *Command = Controller->FreeCommands; - if (Command == NULL) return NULL; - Controller->FreeCommands = Command->Next; - Command->Next = NULL; - return Command; -} - - -/* - DAC960_DeallocateCommand deallocates Command, returning it to Controller's - free list. -*/ - -static inline void DAC960_DeallocateCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - - Command->Request = NULL; - Command->Next = Controller->FreeCommands; - Controller->FreeCommands = Command; -} - - -/* - DAC960_WaitForCommand waits for a wake_up on Controller's Command Wait Queue. -*/ - -static void DAC960_WaitForCommand(DAC960_Controller_T *Controller) -{ - spin_unlock_irq(&Controller->queue_lock); - __wait_event(Controller->CommandWaitQueue, Controller->FreeCommands); - spin_lock_irq(&Controller->queue_lock); -} - -/* - DAC960_GEM_QueueCommand queues Command for DAC960 GEM Series Controllers. -*/ - -static void DAC960_GEM_QueueCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandMailbox_T *NextCommandMailbox = - Controller->V2.NextCommandMailbox; - - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_GEM_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - - if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V2.PreviousCommandMailbox2->Words[0] == 0) - DAC960_GEM_MemoryMailboxNewCommand(ControllerBaseAddress); - - Controller->V2.PreviousCommandMailbox2 = - Controller->V2.PreviousCommandMailbox1; - Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox; - - if (++NextCommandMailbox > Controller->V2.LastCommandMailbox) - NextCommandMailbox = Controller->V2.FirstCommandMailbox; - - Controller->V2.NextCommandMailbox = NextCommandMailbox; -} - -/* - DAC960_BA_QueueCommand queues Command for DAC960 BA Series Controllers. -*/ - -static void DAC960_BA_QueueCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandMailbox_T *NextCommandMailbox = - Controller->V2.NextCommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_BA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V2.PreviousCommandMailbox2->Words[0] == 0) - DAC960_BA_MemoryMailboxNewCommand(ControllerBaseAddress); - Controller->V2.PreviousCommandMailbox2 = - Controller->V2.PreviousCommandMailbox1; - Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox; - if (++NextCommandMailbox > Controller->V2.LastCommandMailbox) - NextCommandMailbox = Controller->V2.FirstCommandMailbox; - Controller->V2.NextCommandMailbox = NextCommandMailbox; -} - - -/* - DAC960_LP_QueueCommand queues Command for DAC960 LP Series Controllers. -*/ - -static void DAC960_LP_QueueCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandMailbox_T *NextCommandMailbox = - Controller->V2.NextCommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_LP_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - if (Controller->V2.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V2.PreviousCommandMailbox2->Words[0] == 0) - DAC960_LP_MemoryMailboxNewCommand(ControllerBaseAddress); - Controller->V2.PreviousCommandMailbox2 = - Controller->V2.PreviousCommandMailbox1; - Controller->V2.PreviousCommandMailbox1 = NextCommandMailbox; - if (++NextCommandMailbox > Controller->V2.LastCommandMailbox) - NextCommandMailbox = Controller->V2.FirstCommandMailbox; - Controller->V2.NextCommandMailbox = NextCommandMailbox; -} - - -/* - DAC960_LA_QueueCommandDualMode queues Command for DAC960 LA Series - Controllers with Dual Mode Firmware. -*/ - -static void DAC960_LA_QueueCommandDualMode(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandMailbox_T *NextCommandMailbox = - Controller->V1.NextCommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V1.PreviousCommandMailbox2->Words[0] == 0) - DAC960_LA_MemoryMailboxNewCommand(ControllerBaseAddress); - Controller->V1.PreviousCommandMailbox2 = - Controller->V1.PreviousCommandMailbox1; - Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; - if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) - NextCommandMailbox = Controller->V1.FirstCommandMailbox; - Controller->V1.NextCommandMailbox = NextCommandMailbox; -} - - -/* - DAC960_LA_QueueCommandSingleMode queues Command for DAC960 LA Series - Controllers with Single Mode Firmware. -*/ - -static void DAC960_LA_QueueCommandSingleMode(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandMailbox_T *NextCommandMailbox = - Controller->V1.NextCommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_LA_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V1.PreviousCommandMailbox2->Words[0] == 0) - DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress); - Controller->V1.PreviousCommandMailbox2 = - Controller->V1.PreviousCommandMailbox1; - Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; - if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) - NextCommandMailbox = Controller->V1.FirstCommandMailbox; - Controller->V1.NextCommandMailbox = NextCommandMailbox; -} - - -/* - DAC960_PG_QueueCommandDualMode queues Command for DAC960 PG Series - Controllers with Dual Mode Firmware. -*/ - -static void DAC960_PG_QueueCommandDualMode(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandMailbox_T *NextCommandMailbox = - Controller->V1.NextCommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V1.PreviousCommandMailbox2->Words[0] == 0) - DAC960_PG_MemoryMailboxNewCommand(ControllerBaseAddress); - Controller->V1.PreviousCommandMailbox2 = - Controller->V1.PreviousCommandMailbox1; - Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; - if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) - NextCommandMailbox = Controller->V1.FirstCommandMailbox; - Controller->V1.NextCommandMailbox = NextCommandMailbox; -} - - -/* - DAC960_PG_QueueCommandSingleMode queues Command for DAC960 PG Series - Controllers with Single Mode Firmware. -*/ - -static void DAC960_PG_QueueCommandSingleMode(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandMailbox_T *NextCommandMailbox = - Controller->V1.NextCommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - DAC960_PG_WriteCommandMailbox(NextCommandMailbox, CommandMailbox); - if (Controller->V1.PreviousCommandMailbox1->Words[0] == 0 || - Controller->V1.PreviousCommandMailbox2->Words[0] == 0) - DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress); - Controller->V1.PreviousCommandMailbox2 = - Controller->V1.PreviousCommandMailbox1; - Controller->V1.PreviousCommandMailbox1 = NextCommandMailbox; - if (++NextCommandMailbox > Controller->V1.LastCommandMailbox) - NextCommandMailbox = Controller->V1.FirstCommandMailbox; - Controller->V1.NextCommandMailbox = NextCommandMailbox; -} - - -/* - DAC960_PD_QueueCommand queues Command for DAC960 PD Series Controllers. -*/ - -static void DAC960_PD_QueueCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - while (DAC960_PD_MailboxFullP(ControllerBaseAddress)) - udelay(1); - DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox); - DAC960_PD_NewCommand(ControllerBaseAddress); -} - - -/* - DAC960_P_QueueCommand queues Command for DAC960 P Series Controllers. -*/ - -static void DAC960_P_QueueCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - CommandMailbox->Common.CommandIdentifier = Command->CommandIdentifier; - switch (CommandMailbox->Common.CommandOpcode) - { - case DAC960_V1_Enquiry: - CommandMailbox->Common.CommandOpcode = DAC960_V1_Enquiry_Old; - break; - case DAC960_V1_GetDeviceState: - CommandMailbox->Common.CommandOpcode = DAC960_V1_GetDeviceState_Old; - break; - case DAC960_V1_Read: - CommandMailbox->Common.CommandOpcode = DAC960_V1_Read_Old; - DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); - break; - case DAC960_V1_Write: - CommandMailbox->Common.CommandOpcode = DAC960_V1_Write_Old; - DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); - break; - case DAC960_V1_ReadWithScatterGather: - CommandMailbox->Common.CommandOpcode = - DAC960_V1_ReadWithScatterGather_Old; - DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); - break; - case DAC960_V1_WriteWithScatterGather: - CommandMailbox->Common.CommandOpcode = - DAC960_V1_WriteWithScatterGather_Old; - DAC960_PD_To_P_TranslateReadWriteCommand(CommandMailbox); - break; - default: - break; - } - while (DAC960_PD_MailboxFullP(ControllerBaseAddress)) - udelay(1); - DAC960_PD_WriteCommandMailbox(ControllerBaseAddress, CommandMailbox); - DAC960_PD_NewCommand(ControllerBaseAddress); -} - - -/* - DAC960_ExecuteCommand executes Command and waits for completion. -*/ - -static void DAC960_ExecuteCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DECLARE_COMPLETION_ONSTACK(Completion); - unsigned long flags; - Command->Completion = &Completion; - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_QueueCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - - if (in_interrupt()) - return; - wait_for_completion(&Completion); -} - - -/* - DAC960_V1_ExecuteType3 executes a DAC960 V1 Firmware Controller Type 3 - Command and waits for completion. It returns true on success and false - on failure. -*/ - -static bool DAC960_V1_ExecuteType3(DAC960_Controller_T *Controller, - DAC960_V1_CommandOpcode_T CommandOpcode, - dma_addr_t DataDMA) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandStatus_T CommandStatus; - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->Type3.CommandOpcode = CommandOpcode; - CommandMailbox->Type3.BusAddress = DataDMA; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V1.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V1_NormalCompletion); -} - - -/* - DAC960_V1_ExecuteTypeB executes a DAC960 V1 Firmware Controller Type 3B - Command and waits for completion. It returns true on success and false - on failure. -*/ - -static bool DAC960_V1_ExecuteType3B(DAC960_Controller_T *Controller, - DAC960_V1_CommandOpcode_T CommandOpcode, - unsigned char CommandOpcode2, - dma_addr_t DataDMA) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandStatus_T CommandStatus; - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->Type3B.CommandOpcode = CommandOpcode; - CommandMailbox->Type3B.CommandOpcode2 = CommandOpcode2; - CommandMailbox->Type3B.BusAddress = DataDMA; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V1.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V1_NormalCompletion); -} - - -/* - DAC960_V1_ExecuteType3D executes a DAC960 V1 Firmware Controller Type 3D - Command and waits for completion. It returns true on success and false - on failure. -*/ - -static bool DAC960_V1_ExecuteType3D(DAC960_Controller_T *Controller, - DAC960_V1_CommandOpcode_T CommandOpcode, - unsigned char Channel, - unsigned char TargetID, - dma_addr_t DataDMA) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandStatus_T CommandStatus; - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->Type3D.CommandOpcode = CommandOpcode; - CommandMailbox->Type3D.Channel = Channel; - CommandMailbox->Type3D.TargetID = TargetID; - CommandMailbox->Type3D.BusAddress = DataDMA; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V1.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V1_NormalCompletion); -} - - -/* - DAC960_V2_GeneralInfo executes a DAC960 V2 Firmware General Information - Reading IOCTL Command and waits for completion. It returns true on success - and false on failure. - - Return data in The controller's HealthStatusBuffer, which is dma-able memory -*/ - -static bool DAC960_V2_GeneralInfo(DAC960_Controller_T *Controller) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->Common.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->Common.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->Common.DataTransferSize = sizeof(DAC960_V2_HealthStatusBuffer_T); - CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_GetHealthStatus; - CommandMailbox->Common.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.HealthStatusBufferDMA; - CommandMailbox->Common.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->Common.DataTransferSize; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V2_ControllerInfo executes a DAC960 V2 Firmware Controller - Information Reading IOCTL Command and waits for completion. It returns - true on success and false on failure. - - Data is returned in the controller's V2.NewControllerInformation dma-able - memory buffer. -*/ - -static bool DAC960_V2_NewControllerInfo(DAC960_Controller_T *Controller) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->ControllerInfo.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->ControllerInfo.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->ControllerInfo.DataTransferSize = sizeof(DAC960_V2_ControllerInfo_T); - CommandMailbox->ControllerInfo.ControllerNumber = 0; - CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo; - CommandMailbox->ControllerInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewControllerInformationDMA; - CommandMailbox->ControllerInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->ControllerInfo.DataTransferSize; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V2_LogicalDeviceInfo executes a DAC960 V2 Firmware Controller Logical - Device Information Reading IOCTL Command and waits for completion. It - returns true on success and false on failure. - - Data is returned in the controller's V2.NewLogicalDeviceInformation -*/ - -static bool DAC960_V2_NewLogicalDeviceInfo(DAC960_Controller_T *Controller, - unsigned short LogicalDeviceNumber) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->LogicalDeviceInfo.CommandOpcode = - DAC960_V2_IOCTL; - CommandMailbox->LogicalDeviceInfo.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->LogicalDeviceInfo.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->LogicalDeviceInfo.DataTransferSize = - sizeof(DAC960_V2_LogicalDeviceInfo_T); - CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = - LogicalDeviceNumber; - CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = DAC960_V2_GetLogicalDeviceInfoValid; - CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewLogicalDeviceInformationDMA; - CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->LogicalDeviceInfo.DataTransferSize; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V2_PhysicalDeviceInfo executes a DAC960 V2 Firmware Controller "Read - Physical Device Information" IOCTL Command and waits for completion. It - returns true on success and false on failure. - - The Channel, TargetID, LogicalUnit arguments should be 0 the first time - this function is called for a given controller. This will return data - for the "first" device on that controller. The returned data includes a - Channel, TargetID, LogicalUnit that can be passed in to this routine to - get data for the NEXT device on that controller. - - Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able - memory buffer. - -*/ - -static bool DAC960_V2_NewPhysicalDeviceInfo(DAC960_Controller_T *Controller, - unsigned char Channel, - unsigned char TargetID, - unsigned char LogicalUnit) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->PhysicalDeviceInfo.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->PhysicalDeviceInfo.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->PhysicalDeviceInfo.DataTransferSize = - sizeof(DAC960_V2_PhysicalDeviceInfo_T); - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = LogicalUnit; - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID; - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel; - CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode = - DAC960_V2_GetPhysicalDeviceInfoValid; - CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewPhysicalDeviceInformationDMA; - CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->PhysicalDeviceInfo.DataTransferSize; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -static void DAC960_V2_ConstructNewUnitSerialNumber( - DAC960_Controller_T *Controller, - DAC960_V2_CommandMailbox_T *CommandMailbox, int Channel, int TargetID, - int LogicalUnit) -{ - CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10_Passthru; - CommandMailbox->SCSI_10.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->SCSI_10.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->SCSI_10.DataTransferSize = - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - CommandMailbox->SCSI_10.PhysicalDevice.LogicalUnit = LogicalUnit; - CommandMailbox->SCSI_10.PhysicalDevice.TargetID = TargetID; - CommandMailbox->SCSI_10.PhysicalDevice.Channel = Channel; - CommandMailbox->SCSI_10.CDBLength = 6; - CommandMailbox->SCSI_10.SCSI_CDB[0] = 0x12; /* INQUIRY */ - CommandMailbox->SCSI_10.SCSI_CDB[1] = 1; /* EVPD = 1 */ - CommandMailbox->SCSI_10.SCSI_CDB[2] = 0x80; /* Page Code */ - CommandMailbox->SCSI_10.SCSI_CDB[3] = 0; /* Reserved */ - CommandMailbox->SCSI_10.SCSI_CDB[4] = - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - CommandMailbox->SCSI_10.SCSI_CDB[5] = 0; /* Control */ - CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewInquiryUnitSerialNumberDMA; - CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->SCSI_10.DataTransferSize; -} - - -/* - DAC960_V2_NewUnitSerialNumber executes an SCSI pass-through - Inquiry command to a SCSI device identified by Channel number, - Target id, Logical Unit Number. This function Waits for completion - of the command. - - The return data includes Unit Serial Number information for the - specified device. - - Data is stored in the controller's V2.NewPhysicalDeviceInfo dma-able - memory buffer. -*/ - -static bool DAC960_V2_NewInquiryUnitSerialNumber(DAC960_Controller_T *Controller, - int Channel, int TargetID, int LogicalUnit) -{ - DAC960_Command_T *Command; - DAC960_V2_CommandMailbox_T *CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - - Command = DAC960_AllocateCommand(Controller); - CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - - DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox, - Channel, TargetID, LogicalUnit); - - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V2_DeviceOperation executes a DAC960 V2 Firmware Controller Device - Operation IOCTL Command and waits for completion. It returns true on - success and false on failure. -*/ - -static bool DAC960_V2_DeviceOperation(DAC960_Controller_T *Controller, - DAC960_V2_IOCTL_Opcode_T IOCTL_Opcode, - DAC960_V2_OperationDevice_T - OperationDevice) -{ - DAC960_Command_T *Command = DAC960_AllocateCommand(Controller); - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox->DeviceOperation.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->DeviceOperation.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->DeviceOperation.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->DeviceOperation.IOCTL_Opcode = IOCTL_Opcode; - CommandMailbox->DeviceOperation.OperationDevice = OperationDevice; - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - DAC960_DeallocateCommand(Command); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V1_EnableMemoryMailboxInterface enables the Memory Mailbox Interface - for DAC960 V1 Firmware Controllers. - - PD and P controller types have no memory mailbox, but still need the - other dma mapped memory. -*/ - -static bool DAC960_V1_EnableMemoryMailboxInterface(DAC960_Controller_T - *Controller) -{ - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_HardwareType_T hw_type = Controller->HardwareType; - struct pci_dev *PCI_Device = Controller->PCIDevice; - struct dma_loaf *DmaPages = &Controller->DmaPages; - size_t DmaPagesSize; - size_t CommandMailboxesSize; - size_t StatusMailboxesSize; - - DAC960_V1_CommandMailbox_T *CommandMailboxesMemory; - dma_addr_t CommandMailboxesMemoryDMA; - - DAC960_V1_StatusMailbox_T *StatusMailboxesMemory; - dma_addr_t StatusMailboxesMemoryDMA; - - DAC960_V1_CommandMailbox_T CommandMailbox; - DAC960_V1_CommandStatus_T CommandStatus; - int TimeoutCounter; - int i; - - memset(&CommandMailbox, 0, sizeof(DAC960_V1_CommandMailbox_T)); - - if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32))) - return DAC960_Failure(Controller, "DMA mask out of range"); - - if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) { - CommandMailboxesSize = 0; - StatusMailboxesSize = 0; - } else { - CommandMailboxesSize = DAC960_V1_CommandMailboxCount * sizeof(DAC960_V1_CommandMailbox_T); - StatusMailboxesSize = DAC960_V1_StatusMailboxCount * sizeof(DAC960_V1_StatusMailbox_T); - } - DmaPagesSize = CommandMailboxesSize + StatusMailboxesSize + - sizeof(DAC960_V1_DCDB_T) + sizeof(DAC960_V1_Enquiry_T) + - sizeof(DAC960_V1_ErrorTable_T) + sizeof(DAC960_V1_EventLogEntry_T) + - sizeof(DAC960_V1_RebuildProgress_T) + - sizeof(DAC960_V1_LogicalDriveInformationArray_T) + - sizeof(DAC960_V1_BackgroundInitializationStatus_T) + - sizeof(DAC960_V1_DeviceState_T) + sizeof(DAC960_SCSI_Inquiry_T) + - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - - if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) - return false; - - - if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) - goto skip_mailboxes; - - CommandMailboxesMemory = slice_dma_loaf(DmaPages, - CommandMailboxesSize, &CommandMailboxesMemoryDMA); - - /* These are the base addresses for the command memory mailbox array */ - Controller->V1.FirstCommandMailbox = CommandMailboxesMemory; - Controller->V1.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA; - - CommandMailboxesMemory += DAC960_V1_CommandMailboxCount - 1; - Controller->V1.LastCommandMailbox = CommandMailboxesMemory; - Controller->V1.NextCommandMailbox = Controller->V1.FirstCommandMailbox; - Controller->V1.PreviousCommandMailbox1 = Controller->V1.LastCommandMailbox; - Controller->V1.PreviousCommandMailbox2 = - Controller->V1.LastCommandMailbox - 1; - - /* These are the base addresses for the status memory mailbox array */ - StatusMailboxesMemory = slice_dma_loaf(DmaPages, - StatusMailboxesSize, &StatusMailboxesMemoryDMA); - - Controller->V1.FirstStatusMailbox = StatusMailboxesMemory; - Controller->V1.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA; - StatusMailboxesMemory += DAC960_V1_StatusMailboxCount - 1; - Controller->V1.LastStatusMailbox = StatusMailboxesMemory; - Controller->V1.NextStatusMailbox = Controller->V1.FirstStatusMailbox; - -skip_mailboxes: - Controller->V1.MonitoringDCDB = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_DCDB_T), - &Controller->V1.MonitoringDCDB_DMA); - - Controller->V1.NewEnquiry = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_Enquiry_T), - &Controller->V1.NewEnquiryDMA); - - Controller->V1.NewErrorTable = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_ErrorTable_T), - &Controller->V1.NewErrorTableDMA); - - Controller->V1.EventLogEntry = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_EventLogEntry_T), - &Controller->V1.EventLogEntryDMA); - - Controller->V1.RebuildProgress = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_RebuildProgress_T), - &Controller->V1.RebuildProgressDMA); - - Controller->V1.NewLogicalDriveInformation = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_LogicalDriveInformationArray_T), - &Controller->V1.NewLogicalDriveInformationDMA); - - Controller->V1.BackgroundInitializationStatus = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_BackgroundInitializationStatus_T), - &Controller->V1.BackgroundInitializationStatusDMA); - - Controller->V1.NewDeviceState = slice_dma_loaf(DmaPages, - sizeof(DAC960_V1_DeviceState_T), - &Controller->V1.NewDeviceStateDMA); - - Controller->V1.NewInquiryStandardData = slice_dma_loaf(DmaPages, - sizeof(DAC960_SCSI_Inquiry_T), - &Controller->V1.NewInquiryStandardDataDMA); - - Controller->V1.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), - &Controller->V1.NewInquiryUnitSerialNumberDMA); - - if ((hw_type == DAC960_PD_Controller) || (hw_type == DAC960_P_Controller)) - return true; - - /* Enable the Memory Mailbox Interface. */ - Controller->V1.DualModeMemoryMailboxInterface = true; - CommandMailbox.TypeX.CommandOpcode = 0x2B; - CommandMailbox.TypeX.CommandIdentifier = 0; - CommandMailbox.TypeX.CommandOpcode2 = 0x14; - CommandMailbox.TypeX.CommandMailboxesBusAddress = - Controller->V1.FirstCommandMailboxDMA; - CommandMailbox.TypeX.StatusMailboxesBusAddress = - Controller->V1.FirstStatusMailboxDMA; -#define TIMEOUT_COUNT 1000000 - - for (i = 0; i < 2; i++) - switch (Controller->HardwareType) - { - case DAC960_LA_Controller: - TimeoutCounter = TIMEOUT_COUNT; - while (--TimeoutCounter >= 0) - { - if (!DAC960_LA_HardwareMailboxFullP(ControllerBaseAddress)) - break; - udelay(10); - } - if (TimeoutCounter < 0) return false; - DAC960_LA_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox); - DAC960_LA_HardwareMailboxNewCommand(ControllerBaseAddress); - TimeoutCounter = TIMEOUT_COUNT; - while (--TimeoutCounter >= 0) - { - if (DAC960_LA_HardwareMailboxStatusAvailableP( - ControllerBaseAddress)) - break; - udelay(10); - } - if (TimeoutCounter < 0) return false; - CommandStatus = DAC960_LA_ReadStatusRegister(ControllerBaseAddress); - DAC960_LA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); - DAC960_LA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); - if (CommandStatus == DAC960_V1_NormalCompletion) return true; - Controller->V1.DualModeMemoryMailboxInterface = false; - CommandMailbox.TypeX.CommandOpcode2 = 0x10; - break; - case DAC960_PG_Controller: - TimeoutCounter = TIMEOUT_COUNT; - while (--TimeoutCounter >= 0) - { - if (!DAC960_PG_HardwareMailboxFullP(ControllerBaseAddress)) - break; - udelay(10); - } - if (TimeoutCounter < 0) return false; - DAC960_PG_WriteHardwareMailbox(ControllerBaseAddress, &CommandMailbox); - DAC960_PG_HardwareMailboxNewCommand(ControllerBaseAddress); - - TimeoutCounter = TIMEOUT_COUNT; - while (--TimeoutCounter >= 0) - { - if (DAC960_PG_HardwareMailboxStatusAvailableP( - ControllerBaseAddress)) - break; - udelay(10); - } - if (TimeoutCounter < 0) return false; - CommandStatus = DAC960_PG_ReadStatusRegister(ControllerBaseAddress); - DAC960_PG_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); - DAC960_PG_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); - if (CommandStatus == DAC960_V1_NormalCompletion) return true; - Controller->V1.DualModeMemoryMailboxInterface = false; - CommandMailbox.TypeX.CommandOpcode2 = 0x10; - break; - default: - DAC960_Failure(Controller, "Unknown Controller Type\n"); - break; - } - return false; -} - - -/* - DAC960_V2_EnableMemoryMailboxInterface enables the Memory Mailbox Interface - for DAC960 V2 Firmware Controllers. - - Aggregate the space needed for the controller's memory mailbox and - the other data structures that will be targets of dma transfers with - the controller. Allocate a dma-mapped region of memory to hold these - structures. Then, save CPU pointers and dma_addr_t values to reference - the structures that are contained in that region. -*/ - -static bool DAC960_V2_EnableMemoryMailboxInterface(DAC960_Controller_T - *Controller) -{ - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - struct pci_dev *PCI_Device = Controller->PCIDevice; - struct dma_loaf *DmaPages = &Controller->DmaPages; - size_t DmaPagesSize; - size_t CommandMailboxesSize; - size_t StatusMailboxesSize; - - DAC960_V2_CommandMailbox_T *CommandMailboxesMemory; - dma_addr_t CommandMailboxesMemoryDMA; - - DAC960_V2_StatusMailbox_T *StatusMailboxesMemory; - dma_addr_t StatusMailboxesMemoryDMA; - - DAC960_V2_CommandMailbox_T *CommandMailbox; - dma_addr_t CommandMailboxDMA; - DAC960_V2_CommandStatus_T CommandStatus; - - if (pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(64)) && - pci_set_dma_mask(Controller->PCIDevice, DMA_BIT_MASK(32))) - return DAC960_Failure(Controller, "DMA mask out of range"); - - /* This is a temporary dma mapping, used only in the scope of this function */ - CommandMailbox = pci_alloc_consistent(PCI_Device, - sizeof(DAC960_V2_CommandMailbox_T), &CommandMailboxDMA); - if (CommandMailbox == NULL) - return false; - - CommandMailboxesSize = DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T); - StatusMailboxesSize = DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T); - DmaPagesSize = - CommandMailboxesSize + StatusMailboxesSize + - sizeof(DAC960_V2_HealthStatusBuffer_T) + - sizeof(DAC960_V2_ControllerInfo_T) + - sizeof(DAC960_V2_LogicalDeviceInfo_T) + - sizeof(DAC960_V2_PhysicalDeviceInfo_T) + - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T) + - sizeof(DAC960_V2_Event_T) + - sizeof(DAC960_V2_PhysicalToLogicalDevice_T); - - if (!init_dma_loaf(PCI_Device, DmaPages, DmaPagesSize)) { - pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T), - CommandMailbox, CommandMailboxDMA); - return false; - } - - CommandMailboxesMemory = slice_dma_loaf(DmaPages, - CommandMailboxesSize, &CommandMailboxesMemoryDMA); - - /* These are the base addresses for the command memory mailbox array */ - Controller->V2.FirstCommandMailbox = CommandMailboxesMemory; - Controller->V2.FirstCommandMailboxDMA = CommandMailboxesMemoryDMA; - - CommandMailboxesMemory += DAC960_V2_CommandMailboxCount - 1; - Controller->V2.LastCommandMailbox = CommandMailboxesMemory; - Controller->V2.NextCommandMailbox = Controller->V2.FirstCommandMailbox; - Controller->V2.PreviousCommandMailbox1 = Controller->V2.LastCommandMailbox; - Controller->V2.PreviousCommandMailbox2 = - Controller->V2.LastCommandMailbox - 1; - - /* These are the base addresses for the status memory mailbox array */ - StatusMailboxesMemory = slice_dma_loaf(DmaPages, - StatusMailboxesSize, &StatusMailboxesMemoryDMA); - - Controller->V2.FirstStatusMailbox = StatusMailboxesMemory; - Controller->V2.FirstStatusMailboxDMA = StatusMailboxesMemoryDMA; - StatusMailboxesMemory += DAC960_V2_StatusMailboxCount - 1; - Controller->V2.LastStatusMailbox = StatusMailboxesMemory; - Controller->V2.NextStatusMailbox = Controller->V2.FirstStatusMailbox; - - Controller->V2.HealthStatusBuffer = slice_dma_loaf(DmaPages, - sizeof(DAC960_V2_HealthStatusBuffer_T), - &Controller->V2.HealthStatusBufferDMA); - - Controller->V2.NewControllerInformation = slice_dma_loaf(DmaPages, - sizeof(DAC960_V2_ControllerInfo_T), - &Controller->V2.NewControllerInformationDMA); - - Controller->V2.NewLogicalDeviceInformation = slice_dma_loaf(DmaPages, - sizeof(DAC960_V2_LogicalDeviceInfo_T), - &Controller->V2.NewLogicalDeviceInformationDMA); - - Controller->V2.NewPhysicalDeviceInformation = slice_dma_loaf(DmaPages, - sizeof(DAC960_V2_PhysicalDeviceInfo_T), - &Controller->V2.NewPhysicalDeviceInformationDMA); - - Controller->V2.NewInquiryUnitSerialNumber = slice_dma_loaf(DmaPages, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), - &Controller->V2.NewInquiryUnitSerialNumberDMA); - - Controller->V2.Event = slice_dma_loaf(DmaPages, - sizeof(DAC960_V2_Event_T), - &Controller->V2.EventDMA); - - Controller->V2.PhysicalToLogicalDevice = slice_dma_loaf(DmaPages, - sizeof(DAC960_V2_PhysicalToLogicalDevice_T), - &Controller->V2.PhysicalToLogicalDeviceDMA); - - /* - Enable the Memory Mailbox Interface. - - I don't know why we can't just use one of the memory mailboxes - we just allocated to do this, instead of using this temporary one. - Try this change later. - */ - memset(CommandMailbox, 0, sizeof(DAC960_V2_CommandMailbox_T)); - CommandMailbox->SetMemoryMailbox.CommandIdentifier = 1; - CommandMailbox->SetMemoryMailbox.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->SetMemoryMailbox.CommandControlBits.NoAutoRequestSense = true; - CommandMailbox->SetMemoryMailbox.FirstCommandMailboxSizeKB = - (DAC960_V2_CommandMailboxCount * sizeof(DAC960_V2_CommandMailbox_T)) >> 10; - CommandMailbox->SetMemoryMailbox.FirstStatusMailboxSizeKB = - (DAC960_V2_StatusMailboxCount * sizeof(DAC960_V2_StatusMailbox_T)) >> 10; - CommandMailbox->SetMemoryMailbox.SecondCommandMailboxSizeKB = 0; - CommandMailbox->SetMemoryMailbox.SecondStatusMailboxSizeKB = 0; - CommandMailbox->SetMemoryMailbox.RequestSenseSize = 0; - CommandMailbox->SetMemoryMailbox.IOCTL_Opcode = DAC960_V2_SetMemoryMailbox; - CommandMailbox->SetMemoryMailbox.HealthStatusBufferSizeKB = 1; - CommandMailbox->SetMemoryMailbox.HealthStatusBufferBusAddress = - Controller->V2.HealthStatusBufferDMA; - CommandMailbox->SetMemoryMailbox.FirstCommandMailboxBusAddress = - Controller->V2.FirstCommandMailboxDMA; - CommandMailbox->SetMemoryMailbox.FirstStatusMailboxBusAddress = - Controller->V2.FirstStatusMailboxDMA; - switch (Controller->HardwareType) - { - case DAC960_GEM_Controller: - while (DAC960_GEM_HardwareMailboxFullP(ControllerBaseAddress)) - udelay(1); - DAC960_GEM_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA); - DAC960_GEM_HardwareMailboxNewCommand(ControllerBaseAddress); - while (!DAC960_GEM_HardwareMailboxStatusAvailableP(ControllerBaseAddress)) - udelay(1); - CommandStatus = DAC960_GEM_ReadCommandStatus(ControllerBaseAddress); - DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); - DAC960_GEM_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); - break; - case DAC960_BA_Controller: - while (DAC960_BA_HardwareMailboxFullP(ControllerBaseAddress)) - udelay(1); - DAC960_BA_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA); - DAC960_BA_HardwareMailboxNewCommand(ControllerBaseAddress); - while (!DAC960_BA_HardwareMailboxStatusAvailableP(ControllerBaseAddress)) - udelay(1); - CommandStatus = DAC960_BA_ReadCommandStatus(ControllerBaseAddress); - DAC960_BA_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); - DAC960_BA_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); - break; - case DAC960_LP_Controller: - while (DAC960_LP_HardwareMailboxFullP(ControllerBaseAddress)) - udelay(1); - DAC960_LP_WriteHardwareMailbox(ControllerBaseAddress, CommandMailboxDMA); - DAC960_LP_HardwareMailboxNewCommand(ControllerBaseAddress); - while (!DAC960_LP_HardwareMailboxStatusAvailableP(ControllerBaseAddress)) - udelay(1); - CommandStatus = DAC960_LP_ReadCommandStatus(ControllerBaseAddress); - DAC960_LP_AcknowledgeHardwareMailboxInterrupt(ControllerBaseAddress); - DAC960_LP_AcknowledgeHardwareMailboxStatus(ControllerBaseAddress); - break; - default: - DAC960_Failure(Controller, "Unknown Controller Type\n"); - CommandStatus = DAC960_V2_AbormalCompletion; - break; - } - pci_free_consistent(PCI_Device, sizeof(DAC960_V2_CommandMailbox_T), - CommandMailbox, CommandMailboxDMA); - return (CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V1_ReadControllerConfiguration reads the Configuration Information - from DAC960 V1 Firmware Controllers and initializes the Controller structure. -*/ - -static bool DAC960_V1_ReadControllerConfiguration(DAC960_Controller_T - *Controller) -{ - DAC960_V1_Enquiry2_T *Enquiry2; - dma_addr_t Enquiry2DMA; - DAC960_V1_Config2_T *Config2; - dma_addr_t Config2DMA; - int LogicalDriveNumber, Channel, TargetID; - struct dma_loaf local_dma; - - if (!init_dma_loaf(Controller->PCIDevice, &local_dma, - sizeof(DAC960_V1_Enquiry2_T) + sizeof(DAC960_V1_Config2_T))) - return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION"); - - Enquiry2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Enquiry2_T), &Enquiry2DMA); - Config2 = slice_dma_loaf(&local_dma, sizeof(DAC960_V1_Config2_T), &Config2DMA); - - if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry, - Controller->V1.NewEnquiryDMA)) { - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "ENQUIRY"); - } - memcpy(&Controller->V1.Enquiry, Controller->V1.NewEnquiry, - sizeof(DAC960_V1_Enquiry_T)); - - if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_Enquiry2, Enquiry2DMA)) { - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "ENQUIRY2"); - } - - if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_ReadConfig2, Config2DMA)) { - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "READ CONFIG2"); - } - - if (!DAC960_V1_ExecuteType3(Controller, DAC960_V1_GetLogicalDriveInformation, - Controller->V1.NewLogicalDriveInformationDMA)) { - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "GET LOGICAL DRIVE INFORMATION"); - } - memcpy(&Controller->V1.LogicalDriveInformation, - Controller->V1.NewLogicalDriveInformation, - sizeof(DAC960_V1_LogicalDriveInformationArray_T)); - - for (Channel = 0; Channel < Enquiry2->ActualChannels; Channel++) - for (TargetID = 0; TargetID < Enquiry2->MaxTargets; TargetID++) { - if (!DAC960_V1_ExecuteType3D(Controller, DAC960_V1_GetDeviceState, - Channel, TargetID, - Controller->V1.NewDeviceStateDMA)) { - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "GET DEVICE STATE"); - } - memcpy(&Controller->V1.DeviceState[Channel][TargetID], - Controller->V1.NewDeviceState, sizeof(DAC960_V1_DeviceState_T)); - } - /* - Initialize the Controller Model Name and Full Model Name fields. - */ - switch (Enquiry2->HardwareID.SubModel) - { - case DAC960_V1_P_PD_PU: - if (Enquiry2->SCSICapability.BusSpeed == DAC960_V1_Ultra) - strcpy(Controller->ModelName, "DAC960PU"); - else strcpy(Controller->ModelName, "DAC960PD"); - break; - case DAC960_V1_PL: - strcpy(Controller->ModelName, "DAC960PL"); - break; - case DAC960_V1_PG: - strcpy(Controller->ModelName, "DAC960PG"); - break; - case DAC960_V1_PJ: - strcpy(Controller->ModelName, "DAC960PJ"); - break; - case DAC960_V1_PR: - strcpy(Controller->ModelName, "DAC960PR"); - break; - case DAC960_V1_PT: - strcpy(Controller->ModelName, "DAC960PT"); - break; - case DAC960_V1_PTL0: - strcpy(Controller->ModelName, "DAC960PTL0"); - break; - case DAC960_V1_PRL: - strcpy(Controller->ModelName, "DAC960PRL"); - break; - case DAC960_V1_PTL1: - strcpy(Controller->ModelName, "DAC960PTL1"); - break; - case DAC960_V1_1164P: - strcpy(Controller->ModelName, "DAC1164P"); - break; - default: - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "MODEL VERIFICATION"); - } - strcpy(Controller->FullModelName, "Mylex "); - strcat(Controller->FullModelName, Controller->ModelName); - /* - Initialize the Controller Firmware Version field and verify that it - is a supported firmware version. The supported firmware versions are: - - DAC1164P 5.06 and above - DAC960PTL/PRL/PJ/PG 4.06 and above - DAC960PU/PD/PL 3.51 and above - DAC960PU/PD/PL/P 2.73 and above - */ -#if defined(CONFIG_ALPHA) - /* - DEC Alpha machines were often equipped with DAC960 cards that were - OEMed from Mylex, and had their own custom firmware. Version 2.70, - the last custom FW revision to be released by DEC for these older - controllers, appears to work quite well with this driver. - - Cards tested successfully were several versions each of the PD and - PU, called by DEC the KZPSC and KZPAC, respectively, and having - the Manufacturer Numbers (from Mylex), usually on a sticker on the - back of the board, of: - - KZPSC: D040347 (1-channel) or D040348 (2-channel) or D040349 (3-channel) - KZPAC: D040395 (1-channel) or D040396 (2-channel) or D040397 (3-channel) - */ -# define FIRMWARE_27X "2.70" -#else -# define FIRMWARE_27X "2.73" -#endif - - if (Enquiry2->FirmwareID.MajorVersion == 0) - { - Enquiry2->FirmwareID.MajorVersion = - Controller->V1.Enquiry.MajorFirmwareVersion; - Enquiry2->FirmwareID.MinorVersion = - Controller->V1.Enquiry.MinorFirmwareVersion; - Enquiry2->FirmwareID.FirmwareType = '0'; - Enquiry2->FirmwareID.TurnID = 0; - } - snprintf(Controller->FirmwareVersion, sizeof(Controller->FirmwareVersion), - "%d.%02d-%c-%02d", - Enquiry2->FirmwareID.MajorVersion, - Enquiry2->FirmwareID.MinorVersion, - Enquiry2->FirmwareID.FirmwareType, - Enquiry2->FirmwareID.TurnID); - if (!((Controller->FirmwareVersion[0] == '5' && - strcmp(Controller->FirmwareVersion, "5.06") >= 0) || - (Controller->FirmwareVersion[0] == '4' && - strcmp(Controller->FirmwareVersion, "4.06") >= 0) || - (Controller->FirmwareVersion[0] == '3' && - strcmp(Controller->FirmwareVersion, "3.51") >= 0) || - (Controller->FirmwareVersion[0] == '2' && - strcmp(Controller->FirmwareVersion, FIRMWARE_27X) >= 0))) - { - DAC960_Failure(Controller, "FIRMWARE VERSION VERIFICATION"); - DAC960_Error("Firmware Version = '%s'\n", Controller, - Controller->FirmwareVersion); - free_dma_loaf(Controller->PCIDevice, &local_dma); - return false; - } - /* - Initialize the Controller Channels, Targets, Memory Size, and SAF-TE - Enclosure Management Enabled fields. - */ - Controller->Channels = Enquiry2->ActualChannels; - Controller->Targets = Enquiry2->MaxTargets; - Controller->MemorySize = Enquiry2->MemorySize >> 20; - Controller->V1.SAFTE_EnclosureManagementEnabled = - (Enquiry2->FaultManagementType == DAC960_V1_SAFTE); - /* - Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive - Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and - Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one - less than the Controller Queue Depth to allow for an automatic drive - rebuild operation. - */ - Controller->ControllerQueueDepth = Controller->V1.Enquiry.MaxCommands; - Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1; - if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth) - Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth; - Controller->LogicalDriveCount = - Controller->V1.Enquiry.NumberOfLogicalDrives; - Controller->MaxBlocksPerCommand = Enquiry2->MaxBlocksPerCommand; - Controller->ControllerScatterGatherLimit = Enquiry2->MaxScatterGatherEntries; - Controller->DriverScatterGatherLimit = - Controller->ControllerScatterGatherLimit; - if (Controller->DriverScatterGatherLimit > DAC960_V1_ScatterGatherLimit) - Controller->DriverScatterGatherLimit = DAC960_V1_ScatterGatherLimit; - /* - Initialize the Stripe Size, Segment Size, and Geometry Translation. - */ - Controller->V1.StripeSize = Config2->BlocksPerStripe * Config2->BlockFactor - >> (10 - DAC960_BlockSizeBits); - Controller->V1.SegmentSize = Config2->BlocksPerCacheLine * Config2->BlockFactor - >> (10 - DAC960_BlockSizeBits); - switch (Config2->DriveGeometry) - { - case DAC960_V1_Geometry_128_32: - Controller->V1.GeometryTranslationHeads = 128; - Controller->V1.GeometryTranslationSectors = 32; - break; - case DAC960_V1_Geometry_255_63: - Controller->V1.GeometryTranslationHeads = 255; - Controller->V1.GeometryTranslationSectors = 63; - break; - default: - free_dma_loaf(Controller->PCIDevice, &local_dma); - return DAC960_Failure(Controller, "CONFIG2 DRIVE GEOMETRY"); - } - /* - Initialize the Background Initialization Status. - */ - if ((Controller->FirmwareVersion[0] == '4' && - strcmp(Controller->FirmwareVersion, "4.08") >= 0) || - (Controller->FirmwareVersion[0] == '5' && - strcmp(Controller->FirmwareVersion, "5.08") >= 0)) - { - Controller->V1.BackgroundInitializationStatusSupported = true; - DAC960_V1_ExecuteType3B(Controller, - DAC960_V1_BackgroundInitializationControl, 0x20, - Controller-> - V1.BackgroundInitializationStatusDMA); - memcpy(&Controller->V1.LastBackgroundInitializationStatus, - Controller->V1.BackgroundInitializationStatus, - sizeof(DAC960_V1_BackgroundInitializationStatus_T)); - } - /* - Initialize the Logical Drive Initially Accessible flag. - */ - for (LogicalDriveNumber = 0; - LogicalDriveNumber < Controller->LogicalDriveCount; - LogicalDriveNumber++) - if (Controller->V1.LogicalDriveInformation - [LogicalDriveNumber].LogicalDriveState != - DAC960_V1_LogicalDrive_Offline) - Controller->LogicalDriveInitiallyAccessible[LogicalDriveNumber] = true; - Controller->V1.LastRebuildStatus = DAC960_V1_NoRebuildOrCheckInProgress; - free_dma_loaf(Controller->PCIDevice, &local_dma); - return true; -} - - -/* - DAC960_V2_ReadControllerConfiguration reads the Configuration Information - from DAC960 V2 Firmware Controllers and initializes the Controller structure. -*/ - -static bool DAC960_V2_ReadControllerConfiguration(DAC960_Controller_T - *Controller) -{ - DAC960_V2_ControllerInfo_T *ControllerInfo = - &Controller->V2.ControllerInformation; - unsigned short LogicalDeviceNumber = 0; - int ModelNameLength; - - /* Get data into dma-able area, then copy into permanent location */ - if (!DAC960_V2_NewControllerInfo(Controller)) - return DAC960_Failure(Controller, "GET CONTROLLER INFO"); - memcpy(ControllerInfo, Controller->V2.NewControllerInformation, - sizeof(DAC960_V2_ControllerInfo_T)); - - - if (!DAC960_V2_GeneralInfo(Controller)) - return DAC960_Failure(Controller, "GET HEALTH STATUS"); - - /* - Initialize the Controller Model Name and Full Model Name fields. - */ - ModelNameLength = sizeof(ControllerInfo->ControllerName); - if (ModelNameLength > sizeof(Controller->ModelName)-1) - ModelNameLength = sizeof(Controller->ModelName)-1; - memcpy(Controller->ModelName, ControllerInfo->ControllerName, - ModelNameLength); - ModelNameLength--; - while (Controller->ModelName[ModelNameLength] == ' ' || - Controller->ModelName[ModelNameLength] == '\0') - ModelNameLength--; - Controller->ModelName[++ModelNameLength] = '\0'; - strcpy(Controller->FullModelName, "Mylex "); - strcat(Controller->FullModelName, Controller->ModelName); - /* - Initialize the Controller Firmware Version field. - */ - sprintf(Controller->FirmwareVersion, "%d.%02d-%02d", - ControllerInfo->FirmwareMajorVersion, - ControllerInfo->FirmwareMinorVersion, - ControllerInfo->FirmwareTurnNumber); - if (ControllerInfo->FirmwareMajorVersion == 6 && - ControllerInfo->FirmwareMinorVersion == 0 && - ControllerInfo->FirmwareTurnNumber < 1) - { - DAC960_Info("FIRMWARE VERSION %s DOES NOT PROVIDE THE CONTROLLER\n", - Controller, Controller->FirmwareVersion); - DAC960_Info("STATUS MONITORING FUNCTIONALITY NEEDED BY THIS DRIVER.\n", - Controller); - DAC960_Info("PLEASE UPGRADE TO VERSION 6.00-01 OR ABOVE.\n", - Controller); - } - /* - Initialize the Controller Channels, Targets, and Memory Size. - */ - Controller->Channels = ControllerInfo->NumberOfPhysicalChannelsPresent; - Controller->Targets = - ControllerInfo->MaximumTargetsPerChannel - [ControllerInfo->NumberOfPhysicalChannelsPresent-1]; - Controller->MemorySize = ControllerInfo->MemorySizeMB; - /* - Initialize the Controller Queue Depth, Driver Queue Depth, Logical Drive - Count, Maximum Blocks per Command, Controller Scatter/Gather Limit, and - Driver Scatter/Gather Limit. The Driver Queue Depth must be at most one - less than the Controller Queue Depth to allow for an automatic drive - rebuild operation. - */ - Controller->ControllerQueueDepth = ControllerInfo->MaximumParallelCommands; - Controller->DriverQueueDepth = Controller->ControllerQueueDepth - 1; - if (Controller->DriverQueueDepth > DAC960_MaxDriverQueueDepth) - Controller->DriverQueueDepth = DAC960_MaxDriverQueueDepth; - Controller->LogicalDriveCount = ControllerInfo->LogicalDevicesPresent; - Controller->MaxBlocksPerCommand = - ControllerInfo->MaximumDataTransferSizeInBlocks; - Controller->ControllerScatterGatherLimit = - ControllerInfo->MaximumScatterGatherEntries; - Controller->DriverScatterGatherLimit = - Controller->ControllerScatterGatherLimit; - if (Controller->DriverScatterGatherLimit > DAC960_V2_ScatterGatherLimit) - Controller->DriverScatterGatherLimit = DAC960_V2_ScatterGatherLimit; - /* - Initialize the Logical Device Information. - */ - while (true) - { - DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo = - Controller->V2.NewLogicalDeviceInformation; - DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo; - DAC960_V2_PhysicalDevice_T PhysicalDevice; - - if (!DAC960_V2_NewLogicalDeviceInfo(Controller, LogicalDeviceNumber)) - break; - LogicalDeviceNumber = NewLogicalDeviceInfo->LogicalDeviceNumber; - if (LogicalDeviceNumber >= DAC960_MaxLogicalDrives) { - DAC960_Error("DAC960: Logical Drive Number %d not supported\n", - Controller, LogicalDeviceNumber); - break; - } - if (NewLogicalDeviceInfo->DeviceBlockSizeInBytes != DAC960_BlockSize) { - DAC960_Error("DAC960: Logical Drive Block Size %d not supported\n", - Controller, NewLogicalDeviceInfo->DeviceBlockSizeInBytes); - LogicalDeviceNumber++; - continue; - } - PhysicalDevice.Controller = 0; - PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel; - PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID; - PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit; - Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] = - PhysicalDevice; - if (NewLogicalDeviceInfo->LogicalDeviceState != - DAC960_V2_LogicalDevice_Offline) - Controller->LogicalDriveInitiallyAccessible[LogicalDeviceNumber] = true; - LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), - GFP_ATOMIC); - if (LogicalDeviceInfo == NULL) - return DAC960_Failure(Controller, "LOGICAL DEVICE ALLOCATION"); - Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] = - LogicalDeviceInfo; - memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo, - sizeof(DAC960_V2_LogicalDeviceInfo_T)); - LogicalDeviceNumber++; - } - return true; -} - - -/* - DAC960_ReportControllerConfiguration reports the Configuration Information - for Controller. -*/ - -static bool DAC960_ReportControllerConfiguration(DAC960_Controller_T - *Controller) -{ - DAC960_Info("Configuring Mylex %s PCI RAID Controller\n", - Controller, Controller->ModelName); - DAC960_Info(" Firmware Version: %s, Channels: %d, Memory Size: %dMB\n", - Controller, Controller->FirmwareVersion, - Controller->Channels, Controller->MemorySize); - DAC960_Info(" PCI Bus: %d, Device: %d, Function: %d, I/O Address: ", - Controller, Controller->Bus, - Controller->Device, Controller->Function); - if (Controller->IO_Address == 0) - DAC960_Info("Unassigned\n", Controller); - else DAC960_Info("0x%X\n", Controller, Controller->IO_Address); - DAC960_Info(" PCI Address: 0x%X mapped at 0x%lX, IRQ Channel: %d\n", - Controller, Controller->PCI_Address, - (unsigned long) Controller->BaseAddress, - Controller->IRQ_Channel); - DAC960_Info(" Controller Queue Depth: %d, " - "Maximum Blocks per Command: %d\n", - Controller, Controller->ControllerQueueDepth, - Controller->MaxBlocksPerCommand); - DAC960_Info(" Driver Queue Depth: %d, " - "Scatter/Gather Limit: %d of %d Segments\n", - Controller, Controller->DriverQueueDepth, - Controller->DriverScatterGatherLimit, - Controller->ControllerScatterGatherLimit); - if (Controller->FirmwareType == DAC960_V1_Controller) - { - DAC960_Info(" Stripe Size: %dKB, Segment Size: %dKB, " - "BIOS Geometry: %d/%d\n", Controller, - Controller->V1.StripeSize, - Controller->V1.SegmentSize, - Controller->V1.GeometryTranslationHeads, - Controller->V1.GeometryTranslationSectors); - if (Controller->V1.SAFTE_EnclosureManagementEnabled) - DAC960_Info(" SAF-TE Enclosure Management Enabled\n", Controller); - } - return true; -} - - -/* - DAC960_V1_ReadDeviceConfiguration reads the Device Configuration Information - for DAC960 V1 Firmware Controllers by requesting the SCSI Inquiry and SCSI - Inquiry Unit Serial Number information for each device connected to - Controller. -*/ - -static bool DAC960_V1_ReadDeviceConfiguration(DAC960_Controller_T - *Controller) -{ - struct dma_loaf local_dma; - - dma_addr_t DCDBs_dma[DAC960_V1_MaxChannels]; - DAC960_V1_DCDB_T *DCDBs_cpu[DAC960_V1_MaxChannels]; - - dma_addr_t SCSI_Inquiry_dma[DAC960_V1_MaxChannels]; - DAC960_SCSI_Inquiry_T *SCSI_Inquiry_cpu[DAC960_V1_MaxChannels]; - - dma_addr_t SCSI_NewInquiryUnitSerialNumberDMA[DAC960_V1_MaxChannels]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *SCSI_NewInquiryUnitSerialNumberCPU[DAC960_V1_MaxChannels]; - - struct completion Completions[DAC960_V1_MaxChannels]; - unsigned long flags; - int Channel, TargetID; - - if (!init_dma_loaf(Controller->PCIDevice, &local_dma, - DAC960_V1_MaxChannels*(sizeof(DAC960_V1_DCDB_T) + - sizeof(DAC960_SCSI_Inquiry_T) + - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)))) - return DAC960_Failure(Controller, - "DMA ALLOCATION FAILED IN ReadDeviceConfiguration"); - - for (Channel = 0; Channel < Controller->Channels; Channel++) { - DCDBs_cpu[Channel] = slice_dma_loaf(&local_dma, - sizeof(DAC960_V1_DCDB_T), DCDBs_dma + Channel); - SCSI_Inquiry_cpu[Channel] = slice_dma_loaf(&local_dma, - sizeof(DAC960_SCSI_Inquiry_T), - SCSI_Inquiry_dma + Channel); - SCSI_NewInquiryUnitSerialNumberCPU[Channel] = slice_dma_loaf(&local_dma, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), - SCSI_NewInquiryUnitSerialNumberDMA + Channel); - } - - for (TargetID = 0; TargetID < Controller->Targets; TargetID++) - { - /* - * For each channel, submit a probe for a device on that channel. - * The timeout interval for a device that is present is 10 seconds. - * With this approach, the timeout periods can elapse in parallel - * on each channel. - */ - for (Channel = 0; Channel < Controller->Channels; Channel++) - { - dma_addr_t NewInquiryStandardDataDMA = SCSI_Inquiry_dma[Channel]; - DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel]; - dma_addr_t DCDB_dma = DCDBs_dma[Channel]; - DAC960_Command_T *Command = Controller->Commands[Channel]; - struct completion *Completion = &Completions[Channel]; - - init_completion(Completion); - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - Command->Completion = Completion; - Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB; - Command->V1.CommandMailbox.Type3.BusAddress = DCDB_dma; - DCDB->Channel = Channel; - DCDB->TargetID = TargetID; - DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem; - DCDB->EarlyStatus = false; - DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds; - DCDB->NoAutomaticRequestSense = false; - DCDB->DisconnectPermitted = true; - DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T); - DCDB->BusAddress = NewInquiryStandardDataDMA; - DCDB->CDBLength = 6; - DCDB->TransferLengthHigh4 = 0; - DCDB->SenseLength = sizeof(DCDB->SenseData); - DCDB->CDB[0] = 0x12; /* INQUIRY */ - DCDB->CDB[1] = 0; /* EVPD = 0 */ - DCDB->CDB[2] = 0; /* Page Code */ - DCDB->CDB[3] = 0; /* Reserved */ - DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T); - DCDB->CDB[5] = 0; /* Control */ - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_QueueCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - } - /* - * Wait for the problems submitted in the previous loop - * to complete. On the probes that are successful, - * get the serial number of the device that was found. - */ - for (Channel = 0; Channel < Controller->Channels; Channel++) - { - DAC960_SCSI_Inquiry_T *InquiryStandardData = - &Controller->V1.InquiryStandardData[Channel][TargetID]; - DAC960_SCSI_Inquiry_T *NewInquiryStandardData = SCSI_Inquiry_cpu[Channel]; - dma_addr_t NewInquiryUnitSerialNumberDMA = - SCSI_NewInquiryUnitSerialNumberDMA[Channel]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber = - SCSI_NewInquiryUnitSerialNumberCPU[Channel]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID]; - DAC960_Command_T *Command = Controller->Commands[Channel]; - DAC960_V1_DCDB_T *DCDB = DCDBs_cpu[Channel]; - struct completion *Completion = &Completions[Channel]; - - wait_for_completion(Completion); - - if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) { - memset(InquiryStandardData, 0, sizeof(DAC960_SCSI_Inquiry_T)); - InquiryStandardData->PeripheralDeviceType = 0x1F; - continue; - } else - memcpy(InquiryStandardData, NewInquiryStandardData, sizeof(DAC960_SCSI_Inquiry_T)); - - /* Preserve Channel and TargetID values from the previous loop */ - Command->Completion = Completion; - DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - DCDB->BusAddress = NewInquiryUnitSerialNumberDMA; - DCDB->SenseLength = sizeof(DCDB->SenseData); - DCDB->CDB[0] = 0x12; /* INQUIRY */ - DCDB->CDB[1] = 1; /* EVPD = 1 */ - DCDB->CDB[2] = 0x80; /* Page Code */ - DCDB->CDB[3] = 0; /* Reserved */ - DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - DCDB->CDB[5] = 0; /* Control */ - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_QueueCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - wait_for_completion(Completion); - - if (Command->V1.CommandStatus != DAC960_V1_NormalCompletion) { - memset(InquiryUnitSerialNumber, 0, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; - } else - memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - } - } - free_dma_loaf(Controller->PCIDevice, &local_dma); - return true; -} - - -/* - DAC960_V2_ReadDeviceConfiguration reads the Device Configuration Information - for DAC960 V2 Firmware Controllers by requesting the Physical Device - Information and SCSI Inquiry Unit Serial Number information for each - device connected to Controller. -*/ - -static bool DAC960_V2_ReadDeviceConfiguration(DAC960_Controller_T - *Controller) -{ - unsigned char Channel = 0, TargetID = 0, LogicalUnit = 0; - unsigned short PhysicalDeviceIndex = 0; - - while (true) - { - DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo = - Controller->V2.NewPhysicalDeviceInformation; - DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber = - Controller->V2.NewInquiryUnitSerialNumber; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber; - - if (!DAC960_V2_NewPhysicalDeviceInfo(Controller, Channel, TargetID, LogicalUnit)) - break; - - PhysicalDeviceInfo = kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), - GFP_ATOMIC); - if (PhysicalDeviceInfo == NULL) - return DAC960_Failure(Controller, "PHYSICAL DEVICE ALLOCATION"); - Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex] = - PhysicalDeviceInfo; - memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo, - sizeof(DAC960_V2_PhysicalDeviceInfo_T)); - - InquiryUnitSerialNumber = kmalloc( - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), GFP_ATOMIC); - if (InquiryUnitSerialNumber == NULL) { - kfree(PhysicalDeviceInfo); - return DAC960_Failure(Controller, "SERIAL NUMBER ALLOCATION"); - } - Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex] = - InquiryUnitSerialNumber; - - Channel = NewPhysicalDeviceInfo->Channel; - TargetID = NewPhysicalDeviceInfo->TargetID; - LogicalUnit = NewPhysicalDeviceInfo->LogicalUnit; - - /* - Some devices do NOT have Unit Serial Numbers. - This command fails for them. But, we still want to - remember those devices are there. Construct a - UnitSerialNumber structure for the failure case. - */ - if (!DAC960_V2_NewInquiryUnitSerialNumber(Controller, Channel, TargetID, LogicalUnit)) { - memset(InquiryUnitSerialNumber, 0, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; - } else - memcpy(InquiryUnitSerialNumber, NewInquiryUnitSerialNumber, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - - PhysicalDeviceIndex++; - LogicalUnit++; - } - return true; -} - - -/* - DAC960_SanitizeInquiryData sanitizes the Vendor, Model, Revision, and - Product Serial Number fields of the Inquiry Standard Data and Inquiry - Unit Serial Number structures. -*/ - -static void DAC960_SanitizeInquiryData(DAC960_SCSI_Inquiry_T - *InquiryStandardData, - DAC960_SCSI_Inquiry_UnitSerialNumber_T - *InquiryUnitSerialNumber, - unsigned char *Vendor, - unsigned char *Model, - unsigned char *Revision, - unsigned char *SerialNumber) -{ - int SerialNumberLength, i; - if (InquiryStandardData->PeripheralDeviceType == 0x1F) return; - for (i = 0; i < sizeof(InquiryStandardData->VendorIdentification); i++) - { - unsigned char VendorCharacter = - InquiryStandardData->VendorIdentification[i]; - Vendor[i] = (VendorCharacter >= ' ' && VendorCharacter <= '~' - ? VendorCharacter : ' '); - } - Vendor[sizeof(InquiryStandardData->VendorIdentification)] = '\0'; - for (i = 0; i < sizeof(InquiryStandardData->ProductIdentification); i++) - { - unsigned char ModelCharacter = - InquiryStandardData->ProductIdentification[i]; - Model[i] = (ModelCharacter >= ' ' && ModelCharacter <= '~' - ? ModelCharacter : ' '); - } - Model[sizeof(InquiryStandardData->ProductIdentification)] = '\0'; - for (i = 0; i < sizeof(InquiryStandardData->ProductRevisionLevel); i++) - { - unsigned char RevisionCharacter = - InquiryStandardData->ProductRevisionLevel[i]; - Revision[i] = (RevisionCharacter >= ' ' && RevisionCharacter <= '~' - ? RevisionCharacter : ' '); - } - Revision[sizeof(InquiryStandardData->ProductRevisionLevel)] = '\0'; - if (InquiryUnitSerialNumber->PeripheralDeviceType == 0x1F) return; - SerialNumberLength = InquiryUnitSerialNumber->PageLength; - if (SerialNumberLength > - sizeof(InquiryUnitSerialNumber->ProductSerialNumber)) - SerialNumberLength = sizeof(InquiryUnitSerialNumber->ProductSerialNumber); - for (i = 0; i < SerialNumberLength; i++) - { - unsigned char SerialNumberCharacter = - InquiryUnitSerialNumber->ProductSerialNumber[i]; - SerialNumber[i] = - (SerialNumberCharacter >= ' ' && SerialNumberCharacter <= '~' - ? SerialNumberCharacter : ' '); - } - SerialNumber[SerialNumberLength] = '\0'; -} - - -/* - DAC960_V1_ReportDeviceConfiguration reports the Device Configuration - Information for DAC960 V1 Firmware Controllers. -*/ - -static bool DAC960_V1_ReportDeviceConfiguration(DAC960_Controller_T - *Controller) -{ - int LogicalDriveNumber, Channel, TargetID; - DAC960_Info(" Physical Devices:\n", Controller); - for (Channel = 0; Channel < Controller->Channels; Channel++) - for (TargetID = 0; TargetID < Controller->Targets; TargetID++) - { - DAC960_SCSI_Inquiry_T *InquiryStandardData = - &Controller->V1.InquiryStandardData[Channel][TargetID]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - &Controller->V1.InquiryUnitSerialNumber[Channel][TargetID]; - DAC960_V1_DeviceState_T *DeviceState = - &Controller->V1.DeviceState[Channel][TargetID]; - DAC960_V1_ErrorTableEntry_T *ErrorEntry = - &Controller->V1.ErrorTable.ErrorTableEntries[Channel][TargetID]; - char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)]; - char Model[1+sizeof(InquiryStandardData->ProductIdentification)]; - char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)]; - char SerialNumber[1+sizeof(InquiryUnitSerialNumber - ->ProductSerialNumber)]; - if (InquiryStandardData->PeripheralDeviceType == 0x1F) continue; - DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber, - Vendor, Model, Revision, SerialNumber); - DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n", - Controller, Channel, TargetID, (TargetID < 10 ? " " : ""), - Vendor, Model, Revision); - if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F) - DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber); - if (DeviceState->Present && - DeviceState->DeviceType == DAC960_V1_DiskType) - { - if (Controller->V1.DeviceResetCount[Channel][TargetID] > 0) - DAC960_Info(" Disk Status: %s, %u blocks, %d resets\n", - Controller, - (DeviceState->DeviceState == DAC960_V1_Device_Dead - ? "Dead" - : DeviceState->DeviceState - == DAC960_V1_Device_WriteOnly - ? "Write-Only" - : DeviceState->DeviceState - == DAC960_V1_Device_Online - ? "Online" : "Standby"), - DeviceState->DiskSize, - Controller->V1.DeviceResetCount[Channel][TargetID]); - else - DAC960_Info(" Disk Status: %s, %u blocks\n", Controller, - (DeviceState->DeviceState == DAC960_V1_Device_Dead - ? "Dead" - : DeviceState->DeviceState - == DAC960_V1_Device_WriteOnly - ? "Write-Only" - : DeviceState->DeviceState - == DAC960_V1_Device_Online - ? "Online" : "Standby"), - DeviceState->DiskSize); - } - if (ErrorEntry->ParityErrorCount > 0 || - ErrorEntry->SoftErrorCount > 0 || - ErrorEntry->HardErrorCount > 0 || - ErrorEntry->MiscErrorCount > 0) - DAC960_Info(" Errors - Parity: %d, Soft: %d, " - "Hard: %d, Misc: %d\n", Controller, - ErrorEntry->ParityErrorCount, - ErrorEntry->SoftErrorCount, - ErrorEntry->HardErrorCount, - ErrorEntry->MiscErrorCount); - } - DAC960_Info(" Logical Drives:\n", Controller); - for (LogicalDriveNumber = 0; - LogicalDriveNumber < Controller->LogicalDriveCount; - LogicalDriveNumber++) - { - DAC960_V1_LogicalDriveInformation_T *LogicalDriveInformation = - &Controller->V1.LogicalDriveInformation[LogicalDriveNumber]; - DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks, %s\n", - Controller, Controller->ControllerNumber, LogicalDriveNumber, - LogicalDriveInformation->RAIDLevel, - (LogicalDriveInformation->LogicalDriveState - == DAC960_V1_LogicalDrive_Online - ? "Online" - : LogicalDriveInformation->LogicalDriveState - == DAC960_V1_LogicalDrive_Critical - ? "Critical" : "Offline"), - LogicalDriveInformation->LogicalDriveSize, - (LogicalDriveInformation->WriteBack - ? "Write Back" : "Write Thru")); - } - return true; -} - - -/* - DAC960_V2_ReportDeviceConfiguration reports the Device Configuration - Information for DAC960 V2 Firmware Controllers. -*/ - -static bool DAC960_V2_ReportDeviceConfiguration(DAC960_Controller_T - *Controller) -{ - int PhysicalDeviceIndex, LogicalDriveNumber; - DAC960_Info(" Physical Devices:\n", Controller); - for (PhysicalDeviceIndex = 0; - PhysicalDeviceIndex < DAC960_V2_MaxPhysicalDevices; - PhysicalDeviceIndex++) - { - DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo = - Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex]; - DAC960_SCSI_Inquiry_T *InquiryStandardData = - (DAC960_SCSI_Inquiry_T *) &PhysicalDeviceInfo->SCSI_InquiryData; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex]; - char Vendor[1+sizeof(InquiryStandardData->VendorIdentification)]; - char Model[1+sizeof(InquiryStandardData->ProductIdentification)]; - char Revision[1+sizeof(InquiryStandardData->ProductRevisionLevel)]; - char SerialNumber[1+sizeof(InquiryUnitSerialNumber->ProductSerialNumber)]; - if (PhysicalDeviceInfo == NULL) break; - DAC960_SanitizeInquiryData(InquiryStandardData, InquiryUnitSerialNumber, - Vendor, Model, Revision, SerialNumber); - DAC960_Info(" %d:%d%s Vendor: %s Model: %s Revision: %s\n", - Controller, - PhysicalDeviceInfo->Channel, - PhysicalDeviceInfo->TargetID, - (PhysicalDeviceInfo->TargetID < 10 ? " " : ""), - Vendor, Model, Revision); - if (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers == 0) - DAC960_Info(" %sAsynchronous\n", Controller, - (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16 - ? "Wide " :"")); - else - DAC960_Info(" %sSynchronous at %d MB/sec\n", Controller, - (PhysicalDeviceInfo->NegotiatedDataWidthBits == 16 - ? "Wide " :""), - (PhysicalDeviceInfo->NegotiatedSynchronousMegaTransfers - * PhysicalDeviceInfo->NegotiatedDataWidthBits/8)); - if (InquiryUnitSerialNumber->PeripheralDeviceType != 0x1F) - DAC960_Info(" Serial Number: %s\n", Controller, SerialNumber); - if (PhysicalDeviceInfo->PhysicalDeviceState == - DAC960_V2_Device_Unconfigured) - continue; - DAC960_Info(" Disk Status: %s, %u blocks\n", Controller, - (PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Online - ? "Online" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Rebuild - ? "Rebuild" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Missing - ? "Missing" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Critical - ? "Critical" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Dead - ? "Dead" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_SuspectedDead - ? "Suspected-Dead" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_CommandedOffline - ? "Commanded-Offline" - : PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Standby - ? "Standby" : "Unknown"), - PhysicalDeviceInfo->ConfigurableDeviceSize); - if (PhysicalDeviceInfo->ParityErrors == 0 && - PhysicalDeviceInfo->SoftErrors == 0 && - PhysicalDeviceInfo->HardErrors == 0 && - PhysicalDeviceInfo->MiscellaneousErrors == 0 && - PhysicalDeviceInfo->CommandTimeouts == 0 && - PhysicalDeviceInfo->Retries == 0 && - PhysicalDeviceInfo->Aborts == 0 && - PhysicalDeviceInfo->PredictedFailuresDetected == 0) - continue; - DAC960_Info(" Errors - Parity: %d, Soft: %d, " - "Hard: %d, Misc: %d\n", Controller, - PhysicalDeviceInfo->ParityErrors, - PhysicalDeviceInfo->SoftErrors, - PhysicalDeviceInfo->HardErrors, - PhysicalDeviceInfo->MiscellaneousErrors); - DAC960_Info(" Timeouts: %d, Retries: %d, " - "Aborts: %d, Predicted: %d\n", Controller, - PhysicalDeviceInfo->CommandTimeouts, - PhysicalDeviceInfo->Retries, - PhysicalDeviceInfo->Aborts, - PhysicalDeviceInfo->PredictedFailuresDetected); - } - DAC960_Info(" Logical Drives:\n", Controller); - for (LogicalDriveNumber = 0; - LogicalDriveNumber < DAC960_MaxLogicalDrives; - LogicalDriveNumber++) - { - DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = - Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; - static const unsigned char *ReadCacheStatus[] = { - "Read Cache Disabled", - "Read Cache Enabled", - "Read Ahead Enabled", - "Intelligent Read Ahead Enabled", - "-", "-", "-", "-" - }; - static const unsigned char *WriteCacheStatus[] = { - "Write Cache Disabled", - "Logical Device Read Only", - "Write Cache Enabled", - "Intelligent Write Cache Enabled", - "-", "-", "-", "-" - }; - unsigned char *GeometryTranslation; - if (LogicalDeviceInfo == NULL) continue; - switch (LogicalDeviceInfo->DriveGeometry) - { - case DAC960_V2_Geometry_128_32: - GeometryTranslation = "128/32"; - break; - case DAC960_V2_Geometry_255_63: - GeometryTranslation = "255/63"; - break; - default: - GeometryTranslation = "Invalid"; - DAC960_Error("Illegal Logical Device Geometry %d\n", - Controller, LogicalDeviceInfo->DriveGeometry); - break; - } - DAC960_Info(" /dev/rd/c%dd%d: RAID-%d, %s, %u blocks\n", - Controller, Controller->ControllerNumber, LogicalDriveNumber, - LogicalDeviceInfo->RAIDLevel, - (LogicalDeviceInfo->LogicalDeviceState - == DAC960_V2_LogicalDevice_Online - ? "Online" - : LogicalDeviceInfo->LogicalDeviceState - == DAC960_V2_LogicalDevice_Critical - ? "Critical" : "Offline"), - LogicalDeviceInfo->ConfigurableDeviceSize); - DAC960_Info(" Logical Device %s, BIOS Geometry: %s\n", - Controller, - (LogicalDeviceInfo->LogicalDeviceControl - .LogicalDeviceInitialized - ? "Initialized" : "Uninitialized"), - GeometryTranslation); - if (LogicalDeviceInfo->StripeSize == 0) - { - if (LogicalDeviceInfo->CacheLineSize == 0) - DAC960_Info(" Stripe Size: N/A, " - "Segment Size: N/A\n", Controller); - else - DAC960_Info(" Stripe Size: N/A, " - "Segment Size: %dKB\n", Controller, - 1 << (LogicalDeviceInfo->CacheLineSize - 2)); - } - else - { - if (LogicalDeviceInfo->CacheLineSize == 0) - DAC960_Info(" Stripe Size: %dKB, " - "Segment Size: N/A\n", Controller, - 1 << (LogicalDeviceInfo->StripeSize - 2)); - else - DAC960_Info(" Stripe Size: %dKB, " - "Segment Size: %dKB\n", Controller, - 1 << (LogicalDeviceInfo->StripeSize - 2), - 1 << (LogicalDeviceInfo->CacheLineSize - 2)); - } - DAC960_Info(" %s, %s\n", Controller, - ReadCacheStatus[ - LogicalDeviceInfo->LogicalDeviceControl.ReadCache], - WriteCacheStatus[ - LogicalDeviceInfo->LogicalDeviceControl.WriteCache]); - if (LogicalDeviceInfo->SoftErrors > 0 || - LogicalDeviceInfo->CommandsFailed > 0 || - LogicalDeviceInfo->DeferredWriteErrors) - DAC960_Info(" Errors - Soft: %d, Failed: %d, " - "Deferred Write: %d\n", Controller, - LogicalDeviceInfo->SoftErrors, - LogicalDeviceInfo->CommandsFailed, - LogicalDeviceInfo->DeferredWriteErrors); - - } - return true; -} - -/* - DAC960_RegisterBlockDevice registers the Block Device structures - associated with Controller. -*/ - -static bool DAC960_RegisterBlockDevice(DAC960_Controller_T *Controller) -{ - int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber; - int n; - - /* - Register the Block Device Major Number for this DAC960 Controller. - */ - if (register_blkdev(MajorNumber, "dac960") < 0) - return false; - - for (n = 0; n < DAC960_MaxLogicalDrives; n++) { - struct gendisk *disk = Controller->disks[n]; - struct request_queue *RequestQueue; - - /* for now, let all request queues share controller's lock */ - RequestQueue = blk_init_queue(DAC960_RequestFunction,&Controller->queue_lock); - if (!RequestQueue) { - printk("DAC960: failure to allocate request queue\n"); - continue; - } - Controller->RequestQueue[n] = RequestQueue; - RequestQueue->queuedata = Controller; - blk_queue_max_segments(RequestQueue, Controller->DriverScatterGatherLimit); - blk_queue_max_hw_sectors(RequestQueue, Controller->MaxBlocksPerCommand); - disk->queue = RequestQueue; - sprintf(disk->disk_name, "rd/c%dd%d", Controller->ControllerNumber, n); - disk->major = MajorNumber; - disk->first_minor = n << DAC960_MaxPartitionsBits; - disk->fops = &DAC960_BlockDeviceOperations; - } - /* - Indicate the Block Device Registration completed successfully, - */ - return true; -} - - -/* - DAC960_UnregisterBlockDevice unregisters the Block Device structures - associated with Controller. -*/ - -static void DAC960_UnregisterBlockDevice(DAC960_Controller_T *Controller) -{ - int MajorNumber = DAC960_MAJOR + Controller->ControllerNumber; - int disk; - - /* does order matter when deleting gendisk and cleanup in request queue? */ - for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) { - del_gendisk(Controller->disks[disk]); - blk_cleanup_queue(Controller->RequestQueue[disk]); - Controller->RequestQueue[disk] = NULL; - } - - /* - Unregister the Block Device Major Number for this DAC960 Controller. - */ - unregister_blkdev(MajorNumber, "dac960"); -} - -/* - DAC960_ComputeGenericDiskInfo computes the values for the Generic Disk - Information Partition Sector Counts and Block Sizes. -*/ - -static void DAC960_ComputeGenericDiskInfo(DAC960_Controller_T *Controller) -{ - int disk; - for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) - set_capacity(Controller->disks[disk], disk_size(Controller, disk)); -} - -/* - DAC960_ReportErrorStatus reports Controller BIOS Messages passed through - the Error Status Register when the driver performs the BIOS handshaking. - It returns true for fatal errors and false otherwise. -*/ - -static bool DAC960_ReportErrorStatus(DAC960_Controller_T *Controller, - unsigned char ErrorStatus, - unsigned char Parameter0, - unsigned char Parameter1) -{ - switch (ErrorStatus) - { - case 0x00: - DAC960_Notice("Physical Device %d:%d Not Responding\n", - Controller, Parameter1, Parameter0); - break; - case 0x08: - if (Controller->DriveSpinUpMessageDisplayed) break; - DAC960_Notice("Spinning Up Drives\n", Controller); - Controller->DriveSpinUpMessageDisplayed = true; - break; - case 0x30: - DAC960_Notice("Configuration Checksum Error\n", Controller); - break; - case 0x60: - DAC960_Notice("Mirror Race Recovery Failed\n", Controller); - break; - case 0x70: - DAC960_Notice("Mirror Race Recovery In Progress\n", Controller); - break; - case 0x90: - DAC960_Notice("Physical Device %d:%d COD Mismatch\n", - Controller, Parameter1, Parameter0); - break; - case 0xA0: - DAC960_Notice("Logical Drive Installation Aborted\n", Controller); - break; - case 0xB0: - DAC960_Notice("Mirror Race On A Critical Logical Drive\n", Controller); - break; - case 0xD0: - DAC960_Notice("New Controller Configuration Found\n", Controller); - break; - case 0xF0: - DAC960_Error("Fatal Memory Parity Error for Controller at\n", Controller); - return true; - default: - DAC960_Error("Unknown Initialization Error %02X for Controller at\n", - Controller, ErrorStatus); - return true; - } - return false; -} - - -/* - * DAC960_DetectCleanup releases the resources that were allocated - * during DAC960_DetectController(). DAC960_DetectController can - * has several internal failure points, so not ALL resources may - * have been allocated. It's important to free only - * resources that HAVE been allocated. The code below always - * tests that the resource has been allocated before attempting to - * free it. - */ -static void DAC960_DetectCleanup(DAC960_Controller_T *Controller) -{ - int i; - - /* Free the memory mailbox, status, and related structures */ - free_dma_loaf(Controller->PCIDevice, &Controller->DmaPages); - if (Controller->MemoryMappedAddress) { - switch(Controller->HardwareType) - { - case DAC960_GEM_Controller: - DAC960_GEM_DisableInterrupts(Controller->BaseAddress); - break; - case DAC960_BA_Controller: - DAC960_BA_DisableInterrupts(Controller->BaseAddress); - break; - case DAC960_LP_Controller: - DAC960_LP_DisableInterrupts(Controller->BaseAddress); - break; - case DAC960_LA_Controller: - DAC960_LA_DisableInterrupts(Controller->BaseAddress); - break; - case DAC960_PG_Controller: - DAC960_PG_DisableInterrupts(Controller->BaseAddress); - break; - case DAC960_PD_Controller: - DAC960_PD_DisableInterrupts(Controller->BaseAddress); - break; - case DAC960_P_Controller: - DAC960_PD_DisableInterrupts(Controller->BaseAddress); - break; - } - iounmap(Controller->MemoryMappedAddress); - } - if (Controller->IRQ_Channel) - free_irq(Controller->IRQ_Channel, Controller); - if (Controller->IO_Address) - release_region(Controller->IO_Address, 0x80); - pci_disable_device(Controller->PCIDevice); - for (i = 0; (i < DAC960_MaxLogicalDrives) && Controller->disks[i]; i++) - put_disk(Controller->disks[i]); - DAC960_Controllers[Controller->ControllerNumber] = NULL; - kfree(Controller); -} - - -/* - DAC960_DetectController detects Mylex DAC960/AcceleRAID/eXtremeRAID - PCI RAID Controllers by interrogating the PCI Configuration Space for - Controller Type. -*/ - -static DAC960_Controller_T * -DAC960_DetectController(struct pci_dev *PCI_Device, - const struct pci_device_id *entry) -{ - struct DAC960_privdata *privdata = - (struct DAC960_privdata *)entry->driver_data; - irq_handler_t InterruptHandler = privdata->InterruptHandler; - unsigned int MemoryWindowSize = privdata->MemoryWindowSize; - DAC960_Controller_T *Controller = NULL; - unsigned char DeviceFunction = PCI_Device->devfn; - unsigned char ErrorStatus, Parameter0, Parameter1; - unsigned int IRQ_Channel; - void __iomem *BaseAddress; - int i; - - Controller = kzalloc(sizeof(DAC960_Controller_T), GFP_ATOMIC); - if (Controller == NULL) { - DAC960_Error("Unable to allocate Controller structure for " - "Controller at\n", NULL); - return NULL; - } - Controller->ControllerNumber = DAC960_ControllerCount; - DAC960_Controllers[DAC960_ControllerCount++] = Controller; - Controller->Bus = PCI_Device->bus->number; - Controller->FirmwareType = privdata->FirmwareType; - Controller->HardwareType = privdata->HardwareType; - Controller->Device = DeviceFunction >> 3; - Controller->Function = DeviceFunction & 0x7; - Controller->PCIDevice = PCI_Device; - strcpy(Controller->FullModelName, "DAC960"); - - if (pci_enable_device(PCI_Device)) - goto Failure; - - switch (Controller->HardwareType) - { - case DAC960_GEM_Controller: - Controller->PCI_Address = pci_resource_start(PCI_Device, 0); - break; - case DAC960_BA_Controller: - Controller->PCI_Address = pci_resource_start(PCI_Device, 0); - break; - case DAC960_LP_Controller: - Controller->PCI_Address = pci_resource_start(PCI_Device, 0); - break; - case DAC960_LA_Controller: - Controller->PCI_Address = pci_resource_start(PCI_Device, 0); - break; - case DAC960_PG_Controller: - Controller->PCI_Address = pci_resource_start(PCI_Device, 0); - break; - case DAC960_PD_Controller: - Controller->IO_Address = pci_resource_start(PCI_Device, 0); - Controller->PCI_Address = pci_resource_start(PCI_Device, 1); - break; - case DAC960_P_Controller: - Controller->IO_Address = pci_resource_start(PCI_Device, 0); - Controller->PCI_Address = pci_resource_start(PCI_Device, 1); - break; - } - - pci_set_drvdata(PCI_Device, (void *)((long)Controller->ControllerNumber)); - for (i = 0; i < DAC960_MaxLogicalDrives; i++) { - Controller->disks[i] = alloc_disk(1<disks[i]) - goto Failure; - Controller->disks[i]->private_data = (void *)((long)i); - } - init_waitqueue_head(&Controller->CommandWaitQueue); - init_waitqueue_head(&Controller->HealthStatusWaitQueue); - spin_lock_init(&Controller->queue_lock); - DAC960_AnnounceDriver(Controller); - /* - Map the Controller Register Window. - */ - if (MemoryWindowSize < PAGE_SIZE) - MemoryWindowSize = PAGE_SIZE; - Controller->MemoryMappedAddress = - ioremap_nocache(Controller->PCI_Address & PAGE_MASK, MemoryWindowSize); - Controller->BaseAddress = - Controller->MemoryMappedAddress + (Controller->PCI_Address & ~PAGE_MASK); - if (Controller->MemoryMappedAddress == NULL) - { - DAC960_Error("Unable to map Controller Register Window for " - "Controller at\n", Controller); - goto Failure; - } - BaseAddress = Controller->BaseAddress; - switch (Controller->HardwareType) - { - case DAC960_GEM_Controller: - DAC960_GEM_DisableInterrupts(BaseAddress); - DAC960_GEM_AcknowledgeHardwareMailboxStatus(BaseAddress); - udelay(1000); - while (DAC960_GEM_InitializationInProgressP(BaseAddress)) - { - if (DAC960_GEM_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V2_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to Enable Memory Mailbox Interface " - "for Controller at\n", Controller); - goto Failure; - } - DAC960_GEM_EnableInterrupts(BaseAddress); - Controller->QueueCommand = DAC960_GEM_QueueCommand; - Controller->ReadControllerConfiguration = - DAC960_V2_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V2_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V2_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V2_QueueReadWriteCommand; - break; - case DAC960_BA_Controller: - DAC960_BA_DisableInterrupts(BaseAddress); - DAC960_BA_AcknowledgeHardwareMailboxStatus(BaseAddress); - udelay(1000); - while (DAC960_BA_InitializationInProgressP(BaseAddress)) - { - if (DAC960_BA_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V2_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to Enable Memory Mailbox Interface " - "for Controller at\n", Controller); - goto Failure; - } - DAC960_BA_EnableInterrupts(BaseAddress); - Controller->QueueCommand = DAC960_BA_QueueCommand; - Controller->ReadControllerConfiguration = - DAC960_V2_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V2_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V2_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V2_QueueReadWriteCommand; - break; - case DAC960_LP_Controller: - DAC960_LP_DisableInterrupts(BaseAddress); - DAC960_LP_AcknowledgeHardwareMailboxStatus(BaseAddress); - udelay(1000); - while (DAC960_LP_InitializationInProgressP(BaseAddress)) - { - if (DAC960_LP_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V2_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to Enable Memory Mailbox Interface " - "for Controller at\n", Controller); - goto Failure; - } - DAC960_LP_EnableInterrupts(BaseAddress); - Controller->QueueCommand = DAC960_LP_QueueCommand; - Controller->ReadControllerConfiguration = - DAC960_V2_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V2_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V2_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V2_QueueReadWriteCommand; - break; - case DAC960_LA_Controller: - DAC960_LA_DisableInterrupts(BaseAddress); - DAC960_LA_AcknowledgeHardwareMailboxStatus(BaseAddress); - udelay(1000); - while (DAC960_LA_InitializationInProgressP(BaseAddress)) - { - if (DAC960_LA_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V1_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to Enable Memory Mailbox Interface " - "for Controller at\n", Controller); - goto Failure; - } - DAC960_LA_EnableInterrupts(BaseAddress); - if (Controller->V1.DualModeMemoryMailboxInterface) - Controller->QueueCommand = DAC960_LA_QueueCommandDualMode; - else Controller->QueueCommand = DAC960_LA_QueueCommandSingleMode; - Controller->ReadControllerConfiguration = - DAC960_V1_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V1_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V1_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V1_QueueReadWriteCommand; - break; - case DAC960_PG_Controller: - DAC960_PG_DisableInterrupts(BaseAddress); - DAC960_PG_AcknowledgeHardwareMailboxStatus(BaseAddress); - udelay(1000); - while (DAC960_PG_InitializationInProgressP(BaseAddress)) - { - if (DAC960_PG_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V1_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to Enable Memory Mailbox Interface " - "for Controller at\n", Controller); - goto Failure; - } - DAC960_PG_EnableInterrupts(BaseAddress); - if (Controller->V1.DualModeMemoryMailboxInterface) - Controller->QueueCommand = DAC960_PG_QueueCommandDualMode; - else Controller->QueueCommand = DAC960_PG_QueueCommandSingleMode; - Controller->ReadControllerConfiguration = - DAC960_V1_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V1_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V1_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V1_QueueReadWriteCommand; - break; - case DAC960_PD_Controller: - if (!request_region(Controller->IO_Address, 0x80, - Controller->FullModelName)) { - DAC960_Error("IO port 0x%lx busy for Controller at\n", - Controller, Controller->IO_Address); - goto Failure; - } - DAC960_PD_DisableInterrupts(BaseAddress); - DAC960_PD_AcknowledgeStatus(BaseAddress); - udelay(1000); - while (DAC960_PD_InitializationInProgressP(BaseAddress)) - { - if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V1_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to allocate DMA mapped memory " - "for Controller at\n", Controller); - goto Failure; - } - DAC960_PD_EnableInterrupts(BaseAddress); - Controller->QueueCommand = DAC960_PD_QueueCommand; - Controller->ReadControllerConfiguration = - DAC960_V1_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V1_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V1_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V1_QueueReadWriteCommand; - break; - case DAC960_P_Controller: - if (!request_region(Controller->IO_Address, 0x80, - Controller->FullModelName)){ - DAC960_Error("IO port 0x%lx busy for Controller at\n", - Controller, Controller->IO_Address); - goto Failure; - } - DAC960_PD_DisableInterrupts(BaseAddress); - DAC960_PD_AcknowledgeStatus(BaseAddress); - udelay(1000); - while (DAC960_PD_InitializationInProgressP(BaseAddress)) - { - if (DAC960_PD_ReadErrorStatus(BaseAddress, &ErrorStatus, - &Parameter0, &Parameter1) && - DAC960_ReportErrorStatus(Controller, ErrorStatus, - Parameter0, Parameter1)) - goto Failure; - udelay(10); - } - if (!DAC960_V1_EnableMemoryMailboxInterface(Controller)) - { - DAC960_Error("Unable to allocate DMA mapped memory" - "for Controller at\n", Controller); - goto Failure; - } - DAC960_PD_EnableInterrupts(BaseAddress); - Controller->QueueCommand = DAC960_P_QueueCommand; - Controller->ReadControllerConfiguration = - DAC960_V1_ReadControllerConfiguration; - Controller->ReadDeviceConfiguration = - DAC960_V1_ReadDeviceConfiguration; - Controller->ReportDeviceConfiguration = - DAC960_V1_ReportDeviceConfiguration; - Controller->QueueReadWriteCommand = - DAC960_V1_QueueReadWriteCommand; - break; - } - /* - Acquire shared access to the IRQ Channel. - */ - IRQ_Channel = PCI_Device->irq; - if (request_irq(IRQ_Channel, InterruptHandler, IRQF_SHARED, - Controller->FullModelName, Controller) < 0) - { - DAC960_Error("Unable to acquire IRQ Channel %d for Controller at\n", - Controller, Controller->IRQ_Channel); - goto Failure; - } - Controller->IRQ_Channel = IRQ_Channel; - Controller->InitialCommand.CommandIdentifier = 1; - Controller->InitialCommand.Controller = Controller; - Controller->Commands[0] = &Controller->InitialCommand; - Controller->FreeCommands = &Controller->InitialCommand; - return Controller; - -Failure: - if (Controller->IO_Address == 0) - DAC960_Error("PCI Bus %d Device %d Function %d I/O Address N/A " - "PCI Address 0x%X\n", Controller, - Controller->Bus, Controller->Device, - Controller->Function, Controller->PCI_Address); - else - DAC960_Error("PCI Bus %d Device %d Function %d I/O Address " - "0x%X PCI Address 0x%X\n", Controller, - Controller->Bus, Controller->Device, - Controller->Function, Controller->IO_Address, - Controller->PCI_Address); - DAC960_DetectCleanup(Controller); - DAC960_ControllerCount--; - return NULL; -} - -/* - DAC960_InitializeController initializes Controller. -*/ - -static bool -DAC960_InitializeController(DAC960_Controller_T *Controller) -{ - if (DAC960_ReadControllerConfiguration(Controller) && - DAC960_ReportControllerConfiguration(Controller) && - DAC960_CreateAuxiliaryStructures(Controller) && - DAC960_ReadDeviceConfiguration(Controller) && - DAC960_ReportDeviceConfiguration(Controller) && - DAC960_RegisterBlockDevice(Controller)) - { - /* - Initialize the Monitoring Timer. - */ - timer_setup(&Controller->MonitoringTimer, - DAC960_MonitoringTimerFunction, 0); - Controller->MonitoringTimer.expires = - jiffies + DAC960_MonitoringTimerInterval; - add_timer(&Controller->MonitoringTimer); - Controller->ControllerInitialized = true; - return true; - } - return false; -} - - -/* - DAC960_FinalizeController finalizes Controller. -*/ - -static void DAC960_FinalizeController(DAC960_Controller_T *Controller) -{ - if (Controller->ControllerInitialized) - { - unsigned long flags; - - /* - * Acquiring and releasing lock here eliminates - * a very low probability race. - * - * The code below allocates controller command structures - * from the free list without holding the controller lock. - * This is safe assuming there is no other activity on - * the controller at the time. - * - * But, there might be a monitoring command still - * in progress. Setting the Shutdown flag while holding - * the lock ensures that there is no monitoring command - * in the interrupt handler currently, and any monitoring - * commands that complete from this time on will NOT return - * their command structure to the free list. - */ - - spin_lock_irqsave(&Controller->queue_lock, flags); - Controller->ShutdownMonitoringTimer = 1; - spin_unlock_irqrestore(&Controller->queue_lock, flags); - - del_timer_sync(&Controller->MonitoringTimer); - if (Controller->FirmwareType == DAC960_V1_Controller) - { - DAC960_Notice("Flushing Cache...", Controller); - DAC960_V1_ExecuteType3(Controller, DAC960_V1_Flush, 0); - DAC960_Notice("done\n", Controller); - - if (Controller->HardwareType == DAC960_PD_Controller) - release_region(Controller->IO_Address, 0x80); - } - else - { - DAC960_Notice("Flushing Cache...", Controller); - DAC960_V2_DeviceOperation(Controller, DAC960_V2_PauseDevice, - DAC960_V2_RAID_Controller); - DAC960_Notice("done\n", Controller); - } - } - DAC960_UnregisterBlockDevice(Controller); - DAC960_DestroyAuxiliaryStructures(Controller); - DAC960_DestroyProcEntries(Controller); - DAC960_DetectCleanup(Controller); -} - - -/* - DAC960_Probe verifies controller's existence and - initializes the DAC960 Driver for that controller. -*/ - -static int -DAC960_Probe(struct pci_dev *dev, const struct pci_device_id *entry) -{ - int disk; - DAC960_Controller_T *Controller; - - if (DAC960_ControllerCount == DAC960_MaxControllers) - { - DAC960_Error("More than %d DAC960 Controllers detected - " - "ignoring from Controller at\n", - NULL, DAC960_MaxControllers); - return -ENODEV; - } - - Controller = DAC960_DetectController(dev, entry); - if (!Controller) - return -ENODEV; - - if (!DAC960_InitializeController(Controller)) { - DAC960_FinalizeController(Controller); - return -ENODEV; - } - - for (disk = 0; disk < DAC960_MaxLogicalDrives; disk++) { - set_capacity(Controller->disks[disk], disk_size(Controller, disk)); - add_disk(Controller->disks[disk]); - } - DAC960_CreateProcEntries(Controller); - return 0; -} - - -/* - DAC960_Finalize finalizes the DAC960 Driver. -*/ - -static void DAC960_Remove(struct pci_dev *PCI_Device) -{ - int Controller_Number = (long)pci_get_drvdata(PCI_Device); - DAC960_Controller_T *Controller = DAC960_Controllers[Controller_Number]; - if (Controller != NULL) - DAC960_FinalizeController(Controller); -} - - -/* - DAC960_V1_QueueReadWriteCommand prepares and queues a Read/Write Command for - DAC960 V1 Firmware Controllers. -*/ - -static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_ScatterGatherSegment_T *ScatterGatherList = - Command->V1.ScatterGatherList; - struct scatterlist *ScatterList = Command->V1.ScatterList; - - DAC960_V1_ClearCommand(Command); - - if (Command->SegmentCount == 1) - { - if (Command->DmaDirection == PCI_DMA_FROMDEVICE) - CommandMailbox->Type5.CommandOpcode = DAC960_V1_Read; - else - CommandMailbox->Type5.CommandOpcode = DAC960_V1_Write; - - CommandMailbox->Type5.LD.TransferLength = Command->BlockCount; - CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber; - CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber; - CommandMailbox->Type5.BusAddress = - (DAC960_BusAddress32_T)sg_dma_address(ScatterList); - } - else - { - int i; - - if (Command->DmaDirection == PCI_DMA_FROMDEVICE) - CommandMailbox->Type5.CommandOpcode = DAC960_V1_ReadWithScatterGather; - else - CommandMailbox->Type5.CommandOpcode = DAC960_V1_WriteWithScatterGather; - - CommandMailbox->Type5.LD.TransferLength = Command->BlockCount; - CommandMailbox->Type5.LD.LogicalDriveNumber = Command->LogicalDriveNumber; - CommandMailbox->Type5.LogicalBlockAddress = Command->BlockNumber; - CommandMailbox->Type5.BusAddress = Command->V1.ScatterGatherListDMA; - - CommandMailbox->Type5.ScatterGatherCount = Command->SegmentCount; - - for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) { - ScatterGatherList->SegmentDataPointer = - (DAC960_BusAddress32_T)sg_dma_address(ScatterList); - ScatterGatherList->SegmentByteCount = - (DAC960_ByteCount32_T)sg_dma_len(ScatterList); - } - } - DAC960_QueueCommand(Command); -} - - -/* - DAC960_V2_QueueReadWriteCommand prepares and queues a Read/Write Command for - DAC960 V2 Firmware Controllers. -*/ - -static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - struct scatterlist *ScatterList = Command->V2.ScatterList; - - DAC960_V2_ClearCommand(Command); - - CommandMailbox->SCSI_10.CommandOpcode = DAC960_V2_SCSI_10; - CommandMailbox->SCSI_10.CommandControlBits.DataTransferControllerToHost = - (Command->DmaDirection == PCI_DMA_FROMDEVICE); - CommandMailbox->SCSI_10.DataTransferSize = - Command->BlockCount << DAC960_BlockSizeBits; - CommandMailbox->SCSI_10.RequestSenseBusAddress = Command->V2.RequestSenseDMA; - CommandMailbox->SCSI_10.PhysicalDevice = - Controller->V2.LogicalDriveToVirtualDevice[Command->LogicalDriveNumber]; - CommandMailbox->SCSI_10.RequestSenseSize = sizeof(DAC960_SCSI_RequestSense_T); - CommandMailbox->SCSI_10.CDBLength = 10; - CommandMailbox->SCSI_10.SCSI_CDB[0] = - (Command->DmaDirection == PCI_DMA_FROMDEVICE ? 0x28 : 0x2A); - CommandMailbox->SCSI_10.SCSI_CDB[2] = Command->BlockNumber >> 24; - CommandMailbox->SCSI_10.SCSI_CDB[3] = Command->BlockNumber >> 16; - CommandMailbox->SCSI_10.SCSI_CDB[4] = Command->BlockNumber >> 8; - CommandMailbox->SCSI_10.SCSI_CDB[5] = Command->BlockNumber; - CommandMailbox->SCSI_10.SCSI_CDB[7] = Command->BlockCount >> 8; - CommandMailbox->SCSI_10.SCSI_CDB[8] = Command->BlockCount; - - if (Command->SegmentCount == 1) - { - CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - (DAC960_BusAddress64_T)sg_dma_address(ScatterList); - CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->SCSI_10.DataTransferSize; - } - else - { - DAC960_V2_ScatterGatherSegment_T *ScatterGatherList; - int i; - - if (Command->SegmentCount > 2) - { - ScatterGatherList = Command->V2.ScatterGatherList; - CommandMailbox->SCSI_10.CommandControlBits - .AdditionalScatterGatherListMemory = true; - CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ExtendedScatterGather.ScatterGatherList0Length = Command->SegmentCount; - CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ExtendedScatterGather.ScatterGatherList0Address = - Command->V2.ScatterGatherListDMA; - } - else - ScatterGatherList = CommandMailbox->SCSI_10.DataTransferMemoryAddress - .ScatterGatherSegments; - - for (i = 0; i < Command->SegmentCount; i++, ScatterList++, ScatterGatherList++) { - ScatterGatherList->SegmentDataPointer = - (DAC960_BusAddress64_T)sg_dma_address(ScatterList); - ScatterGatherList->SegmentByteCount = - (DAC960_ByteCount64_T)sg_dma_len(ScatterList); - } - } - DAC960_QueueCommand(Command); -} - - -static int DAC960_process_queue(DAC960_Controller_T *Controller, struct request_queue *req_q) -{ - struct request *Request; - DAC960_Command_T *Command; - - while(1) { - Request = blk_peek_request(req_q); - if (!Request) - return 1; - - Command = DAC960_AllocateCommand(Controller); - if (Command == NULL) - return 0; - - if (rq_data_dir(Request) == READ) { - Command->DmaDirection = PCI_DMA_FROMDEVICE; - Command->CommandType = DAC960_ReadCommand; - } else { - Command->DmaDirection = PCI_DMA_TODEVICE; - Command->CommandType = DAC960_WriteCommand; - } - Command->Completion = Request->end_io_data; - Command->LogicalDriveNumber = (long)Request->rq_disk->private_data; - Command->BlockNumber = blk_rq_pos(Request); - Command->BlockCount = blk_rq_sectors(Request); - Command->Request = Request; - blk_start_request(Request); - Command->SegmentCount = blk_rq_map_sg(req_q, - Command->Request, Command->cmd_sglist); - /* pci_map_sg MAY change the value of SegCount */ - Command->SegmentCount = pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, - Command->SegmentCount, Command->DmaDirection); - - DAC960_QueueReadWriteCommand(Command); - } -} - -/* - DAC960_ProcessRequest attempts to remove one I/O Request from Controller's - I/O Request Queue and queues it to the Controller. WaitForCommand is true if - this function should wait for a Command to become available if necessary. - This function returns true if an I/O Request was queued and false otherwise. -*/ -static void DAC960_ProcessRequest(DAC960_Controller_T *controller) -{ - int i; - - if (!controller->ControllerInitialized) - return; - - /* Do this better later! */ - for (i = controller->req_q_index; i < DAC960_MaxLogicalDrives; i++) { - struct request_queue *req_q = controller->RequestQueue[i]; - - if (req_q == NULL) - continue; - - if (!DAC960_process_queue(controller, req_q)) { - controller->req_q_index = i; - return; - } - } - - if (controller->req_q_index == 0) - return; - - for (i = 0; i < controller->req_q_index; i++) { - struct request_queue *req_q = controller->RequestQueue[i]; - - if (req_q == NULL) - continue; - - if (!DAC960_process_queue(controller, req_q)) { - controller->req_q_index = i; - return; - } - } -} - - -/* - DAC960_queue_partial_rw extracts one bio from the request already - associated with argument command, and construct a new command block to retry I/O - only on that bio. Queue that command to the controller. - - This function re-uses a previously-allocated Command, - there is no failure mode from trying to allocate a command. -*/ - -static void DAC960_queue_partial_rw(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - struct request *Request = Command->Request; - struct request_queue *req_q = Controller->RequestQueue[Command->LogicalDriveNumber]; - - if (Command->DmaDirection == PCI_DMA_FROMDEVICE) - Command->CommandType = DAC960_ReadRetryCommand; - else - Command->CommandType = DAC960_WriteRetryCommand; - - /* - * We could be more efficient with these mapping requests - * and map only the portions that we need. But since this - * code should almost never be called, just go with a - * simple coding. - */ - (void)blk_rq_map_sg(req_q, Command->Request, Command->cmd_sglist); - - (void)pci_map_sg(Controller->PCIDevice, Command->cmd_sglist, 1, Command->DmaDirection); - /* - * Resubmitting the request sector at a time is really tedious. - * But, this should almost never happen. So, we're willing to pay - * this price so that in the end, as much of the transfer is completed - * successfully as possible. - */ - Command->SegmentCount = 1; - Command->BlockNumber = blk_rq_pos(Request); - Command->BlockCount = 1; - DAC960_QueueReadWriteCommand(Command); - return; -} - -/* - DAC960_RequestFunction is the I/O Request Function for DAC960 Controllers. -*/ - -static void DAC960_RequestFunction(struct request_queue *RequestQueue) -{ - DAC960_ProcessRequest(RequestQueue->queuedata); -} - -/* - DAC960_ProcessCompletedBuffer performs completion processing for an - individual Buffer. -*/ - -static inline bool DAC960_ProcessCompletedRequest(DAC960_Command_T *Command, - bool SuccessfulIO) -{ - struct request *Request = Command->Request; - blk_status_t Error = SuccessfulIO ? BLK_STS_OK : BLK_STS_IOERR; - - pci_unmap_sg(Command->Controller->PCIDevice, Command->cmd_sglist, - Command->SegmentCount, Command->DmaDirection); - - if (!__blk_end_request(Request, Error, Command->BlockCount << 9)) { - if (Command->Completion) { - complete(Command->Completion); - Command->Completion = NULL; - } - return true; - } - return false; -} - -/* - DAC960_V1_ReadWriteError prints an appropriate error message for Command - when an error occurs on a Read or Write operation. -*/ - -static void DAC960_V1_ReadWriteError(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - unsigned char *CommandName = "UNKNOWN"; - switch (Command->CommandType) - { - case DAC960_ReadCommand: - case DAC960_ReadRetryCommand: - CommandName = "READ"; - break; - case DAC960_WriteCommand: - case DAC960_WriteRetryCommand: - CommandName = "WRITE"; - break; - case DAC960_MonitoringCommand: - case DAC960_ImmediateCommand: - case DAC960_QueuedCommand: - break; - } - switch (Command->V1.CommandStatus) - { - case DAC960_V1_IrrecoverableDataError: - DAC960_Error("Irrecoverable Data Error on %s:\n", - Controller, CommandName); - break; - case DAC960_V1_LogicalDriveNonexistentOrOffline: - DAC960_Error("Logical Drive Nonexistent or Offline on %s:\n", - Controller, CommandName); - break; - case DAC960_V1_AccessBeyondEndOfLogicalDrive: - DAC960_Error("Attempt to Access Beyond End of Logical Drive " - "on %s:\n", Controller, CommandName); - break; - case DAC960_V1_BadDataEncountered: - DAC960_Error("Bad Data Encountered on %s:\n", Controller, CommandName); - break; - default: - DAC960_Error("Unexpected Error Status %04X on %s:\n", - Controller, Command->V1.CommandStatus, CommandName); - break; - } - DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n", - Controller, Controller->ControllerNumber, - Command->LogicalDriveNumber, Command->BlockNumber, - Command->BlockNumber + Command->BlockCount - 1); -} - - -/* - DAC960_V1_ProcessCompletedCommand performs completion processing for Command - for DAC960 V1 Firmware Controllers. -*/ - -static void DAC960_V1_ProcessCompletedCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DAC960_CommandType_T CommandType = Command->CommandType; - DAC960_V1_CommandOpcode_T CommandOpcode = - Command->V1.CommandMailbox.Common.CommandOpcode; - DAC960_V1_CommandStatus_T CommandStatus = Command->V1.CommandStatus; - - if (CommandType == DAC960_ReadCommand || - CommandType == DAC960_WriteCommand) - { - -#ifdef FORCE_RETRY_DEBUG - CommandStatus = DAC960_V1_IrrecoverableDataError; -#endif - - if (CommandStatus == DAC960_V1_NormalCompletion) { - - if (!DAC960_ProcessCompletedRequest(Command, true)) - BUG(); - - } else if (CommandStatus == DAC960_V1_IrrecoverableDataError || - CommandStatus == DAC960_V1_BadDataEncountered) - { - /* - * break the command down into pieces and resubmit each - * piece, hoping that some of them will succeed. - */ - DAC960_queue_partial_rw(Command); - return; - } - else - { - if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline) - DAC960_V1_ReadWriteError(Command); - - if (!DAC960_ProcessCompletedRequest(Command, false)) - BUG(); - } - } - else if (CommandType == DAC960_ReadRetryCommand || - CommandType == DAC960_WriteRetryCommand) - { - bool normal_completion; -#ifdef FORCE_RETRY_FAILURE_DEBUG - static int retry_count = 1; -#endif - /* - Perform completion processing for the portion that was - retried, and submit the next portion, if any. - */ - normal_completion = true; - if (CommandStatus != DAC960_V1_NormalCompletion) { - normal_completion = false; - if (CommandStatus != DAC960_V1_LogicalDriveNonexistentOrOffline) - DAC960_V1_ReadWriteError(Command); - } - -#ifdef FORCE_RETRY_FAILURE_DEBUG - if (!(++retry_count % 10000)) { - printk("V1 error retry failure test\n"); - normal_completion = false; - DAC960_V1_ReadWriteError(Command); - } -#endif - - if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) { - DAC960_queue_partial_rw(Command); - return; - } - } - - else if (CommandType == DAC960_MonitoringCommand) - { - if (Controller->ShutdownMonitoringTimer) - return; - if (CommandOpcode == DAC960_V1_Enquiry) - { - DAC960_V1_Enquiry_T *OldEnquiry = &Controller->V1.Enquiry; - DAC960_V1_Enquiry_T *NewEnquiry = Controller->V1.NewEnquiry; - unsigned int OldCriticalLogicalDriveCount = - OldEnquiry->CriticalLogicalDriveCount; - unsigned int NewCriticalLogicalDriveCount = - NewEnquiry->CriticalLogicalDriveCount; - if (NewEnquiry->NumberOfLogicalDrives > Controller->LogicalDriveCount) - { - int LogicalDriveNumber = Controller->LogicalDriveCount - 1; - while (++LogicalDriveNumber < NewEnquiry->NumberOfLogicalDrives) - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "Now Exists\n", Controller, - LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives; - DAC960_ComputeGenericDiskInfo(Controller); - } - if (NewEnquiry->NumberOfLogicalDrives < Controller->LogicalDriveCount) - { - int LogicalDriveNumber = NewEnquiry->NumberOfLogicalDrives - 1; - while (++LogicalDriveNumber < Controller->LogicalDriveCount) - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "No Longer Exists\n", Controller, - LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - Controller->LogicalDriveCount = NewEnquiry->NumberOfLogicalDrives; - DAC960_ComputeGenericDiskInfo(Controller); - } - if (NewEnquiry->StatusFlags.DeferredWriteError != - OldEnquiry->StatusFlags.DeferredWriteError) - DAC960_Critical("Deferred Write Error Flag is now %s\n", Controller, - (NewEnquiry->StatusFlags.DeferredWriteError - ? "TRUE" : "FALSE")); - if ((NewCriticalLogicalDriveCount > 0 || - NewCriticalLogicalDriveCount != OldCriticalLogicalDriveCount) || - (NewEnquiry->OfflineLogicalDriveCount > 0 || - NewEnquiry->OfflineLogicalDriveCount != - OldEnquiry->OfflineLogicalDriveCount) || - (NewEnquiry->DeadDriveCount > 0 || - NewEnquiry->DeadDriveCount != - OldEnquiry->DeadDriveCount) || - (NewEnquiry->EventLogSequenceNumber != - OldEnquiry->EventLogSequenceNumber) || - Controller->MonitoringTimerCount == 0 || - time_after_eq(jiffies, Controller->SecondaryMonitoringTime - + DAC960_SecondaryMonitoringInterval)) - { - Controller->V1.NeedLogicalDriveInformation = true; - Controller->V1.NewEventLogSequenceNumber = - NewEnquiry->EventLogSequenceNumber; - Controller->V1.NeedErrorTableInformation = true; - Controller->V1.NeedDeviceStateInformation = true; - Controller->V1.StartDeviceStateScan = true; - Controller->V1.NeedBackgroundInitializationStatus = - Controller->V1.BackgroundInitializationStatusSupported; - Controller->SecondaryMonitoringTime = jiffies; - } - if (NewEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress || - NewEnquiry->RebuildFlag - == DAC960_V1_BackgroundRebuildInProgress || - OldEnquiry->RebuildFlag == DAC960_V1_StandbyRebuildInProgress || - OldEnquiry->RebuildFlag == DAC960_V1_BackgroundRebuildInProgress) - { - Controller->V1.NeedRebuildProgress = true; - Controller->V1.RebuildProgressFirst = - (NewEnquiry->CriticalLogicalDriveCount < - OldEnquiry->CriticalLogicalDriveCount); - } - if (OldEnquiry->RebuildFlag == DAC960_V1_BackgroundCheckInProgress) - switch (NewEnquiry->RebuildFlag) - { - case DAC960_V1_NoStandbyRebuildOrCheckInProgress: - DAC960_Progress("Consistency Check Completed Successfully\n", - Controller); - break; - case DAC960_V1_StandbyRebuildInProgress: - case DAC960_V1_BackgroundRebuildInProgress: - break; - case DAC960_V1_BackgroundCheckInProgress: - Controller->V1.NeedConsistencyCheckProgress = true; - break; - case DAC960_V1_StandbyRebuildCompletedWithError: - DAC960_Progress("Consistency Check Completed with Error\n", - Controller); - break; - case DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed: - DAC960_Progress("Consistency Check Failed - " - "Physical Device Failed\n", Controller); - break; - case DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed: - DAC960_Progress("Consistency Check Failed - " - "Logical Drive Failed\n", Controller); - break; - case DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses: - DAC960_Progress("Consistency Check Failed - Other Causes\n", - Controller); - break; - case DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated: - DAC960_Progress("Consistency Check Successfully Terminated\n", - Controller); - break; - } - else if (NewEnquiry->RebuildFlag - == DAC960_V1_BackgroundCheckInProgress) - Controller->V1.NeedConsistencyCheckProgress = true; - Controller->MonitoringAlertMode = - (NewEnquiry->CriticalLogicalDriveCount > 0 || - NewEnquiry->OfflineLogicalDriveCount > 0 || - NewEnquiry->DeadDriveCount > 0); - if (NewEnquiry->RebuildFlag > DAC960_V1_BackgroundCheckInProgress) - { - Controller->V1.PendingRebuildFlag = NewEnquiry->RebuildFlag; - Controller->V1.RebuildFlagPending = true; - } - memcpy(&Controller->V1.Enquiry, &Controller->V1.NewEnquiry, - sizeof(DAC960_V1_Enquiry_T)); - } - else if (CommandOpcode == DAC960_V1_PerformEventLogOperation) - { - static char - *DAC960_EventMessages[] = - { "killed because write recovery failed", - "killed because of SCSI bus reset failure", - "killed because of double check condition", - "killed because it was removed", - "killed because of gross error on SCSI chip", - "killed because of bad tag returned from drive", - "killed because of timeout on SCSI command", - "killed because of reset SCSI command issued from system", - "killed because busy or parity error count exceeded limit", - "killed because of 'kill drive' command from system", - "killed because of selection timeout", - "killed due to SCSI phase sequence error", - "killed due to unknown status" }; - DAC960_V1_EventLogEntry_T *EventLogEntry = - Controller->V1.EventLogEntry; - if (EventLogEntry->SequenceNumber == - Controller->V1.OldEventLogSequenceNumber) - { - unsigned char SenseKey = EventLogEntry->SenseKey; - unsigned char AdditionalSenseCode = - EventLogEntry->AdditionalSenseCode; - unsigned char AdditionalSenseCodeQualifier = - EventLogEntry->AdditionalSenseCodeQualifier; - if (SenseKey == DAC960_SenseKey_VendorSpecific && - AdditionalSenseCode == 0x80 && - AdditionalSenseCodeQualifier < - ARRAY_SIZE(DAC960_EventMessages)) - DAC960_Critical("Physical Device %d:%d %s\n", Controller, - EventLogEntry->Channel, - EventLogEntry->TargetID, - DAC960_EventMessages[ - AdditionalSenseCodeQualifier]); - else if (SenseKey == DAC960_SenseKey_UnitAttention && - AdditionalSenseCode == 0x29) - { - if (Controller->MonitoringTimerCount > 0) - Controller->V1.DeviceResetCount[EventLogEntry->Channel] - [EventLogEntry->TargetID]++; - } - else if (!(SenseKey == DAC960_SenseKey_NoSense || - (SenseKey == DAC960_SenseKey_NotReady && - AdditionalSenseCode == 0x04 && - (AdditionalSenseCodeQualifier == 0x01 || - AdditionalSenseCodeQualifier == 0x02)))) - { - DAC960_Critical("Physical Device %d:%d Error Log: " - "Sense Key = %X, ASC = %02X, ASCQ = %02X\n", - Controller, - EventLogEntry->Channel, - EventLogEntry->TargetID, - SenseKey, - AdditionalSenseCode, - AdditionalSenseCodeQualifier); - DAC960_Critical("Physical Device %d:%d Error Log: " - "Information = %02X%02X%02X%02X " - "%02X%02X%02X%02X\n", - Controller, - EventLogEntry->Channel, - EventLogEntry->TargetID, - EventLogEntry->Information[0], - EventLogEntry->Information[1], - EventLogEntry->Information[2], - EventLogEntry->Information[3], - EventLogEntry->CommandSpecificInformation[0], - EventLogEntry->CommandSpecificInformation[1], - EventLogEntry->CommandSpecificInformation[2], - EventLogEntry->CommandSpecificInformation[3]); - } - } - Controller->V1.OldEventLogSequenceNumber++; - } - else if (CommandOpcode == DAC960_V1_GetErrorTable) - { - DAC960_V1_ErrorTable_T *OldErrorTable = &Controller->V1.ErrorTable; - DAC960_V1_ErrorTable_T *NewErrorTable = Controller->V1.NewErrorTable; - int Channel, TargetID; - for (Channel = 0; Channel < Controller->Channels; Channel++) - for (TargetID = 0; TargetID < Controller->Targets; TargetID++) - { - DAC960_V1_ErrorTableEntry_T *NewErrorEntry = - &NewErrorTable->ErrorTableEntries[Channel][TargetID]; - DAC960_V1_ErrorTableEntry_T *OldErrorEntry = - &OldErrorTable->ErrorTableEntries[Channel][TargetID]; - if ((NewErrorEntry->ParityErrorCount != - OldErrorEntry->ParityErrorCount) || - (NewErrorEntry->SoftErrorCount != - OldErrorEntry->SoftErrorCount) || - (NewErrorEntry->HardErrorCount != - OldErrorEntry->HardErrorCount) || - (NewErrorEntry->MiscErrorCount != - OldErrorEntry->MiscErrorCount)) - DAC960_Critical("Physical Device %d:%d Errors: " - "Parity = %d, Soft = %d, " - "Hard = %d, Misc = %d\n", - Controller, Channel, TargetID, - NewErrorEntry->ParityErrorCount, - NewErrorEntry->SoftErrorCount, - NewErrorEntry->HardErrorCount, - NewErrorEntry->MiscErrorCount); - } - memcpy(&Controller->V1.ErrorTable, Controller->V1.NewErrorTable, - sizeof(DAC960_V1_ErrorTable_T)); - } - else if (CommandOpcode == DAC960_V1_GetDeviceState) - { - DAC960_V1_DeviceState_T *OldDeviceState = - &Controller->V1.DeviceState[Controller->V1.DeviceStateChannel] - [Controller->V1.DeviceStateTargetID]; - DAC960_V1_DeviceState_T *NewDeviceState = - Controller->V1.NewDeviceState; - if (NewDeviceState->DeviceState != OldDeviceState->DeviceState) - DAC960_Critical("Physical Device %d:%d is now %s\n", Controller, - Controller->V1.DeviceStateChannel, - Controller->V1.DeviceStateTargetID, - (NewDeviceState->DeviceState - == DAC960_V1_Device_Dead - ? "DEAD" - : NewDeviceState->DeviceState - == DAC960_V1_Device_WriteOnly - ? "WRITE-ONLY" - : NewDeviceState->DeviceState - == DAC960_V1_Device_Online - ? "ONLINE" : "STANDBY")); - if (OldDeviceState->DeviceState == DAC960_V1_Device_Dead && - NewDeviceState->DeviceState != DAC960_V1_Device_Dead) - { - Controller->V1.NeedDeviceInquiryInformation = true; - Controller->V1.NeedDeviceSerialNumberInformation = true; - Controller->V1.DeviceResetCount - [Controller->V1.DeviceStateChannel] - [Controller->V1.DeviceStateTargetID] = 0; - } - memcpy(OldDeviceState, NewDeviceState, - sizeof(DAC960_V1_DeviceState_T)); - } - else if (CommandOpcode == DAC960_V1_GetLogicalDriveInformation) - { - int LogicalDriveNumber; - for (LogicalDriveNumber = 0; - LogicalDriveNumber < Controller->LogicalDriveCount; - LogicalDriveNumber++) - { - DAC960_V1_LogicalDriveInformation_T *OldLogicalDriveInformation = - &Controller->V1.LogicalDriveInformation[LogicalDriveNumber]; - DAC960_V1_LogicalDriveInformation_T *NewLogicalDriveInformation = - &(*Controller->V1.NewLogicalDriveInformation)[LogicalDriveNumber]; - if (NewLogicalDriveInformation->LogicalDriveState != - OldLogicalDriveInformation->LogicalDriveState) - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "is now %s\n", Controller, - LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (NewLogicalDriveInformation->LogicalDriveState - == DAC960_V1_LogicalDrive_Online - ? "ONLINE" - : NewLogicalDriveInformation->LogicalDriveState - == DAC960_V1_LogicalDrive_Critical - ? "CRITICAL" : "OFFLINE")); - if (NewLogicalDriveInformation->WriteBack != - OldLogicalDriveInformation->WriteBack) - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "is now %s\n", Controller, - LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (NewLogicalDriveInformation->WriteBack - ? "WRITE BACK" : "WRITE THRU")); - } - memcpy(&Controller->V1.LogicalDriveInformation, - Controller->V1.NewLogicalDriveInformation, - sizeof(DAC960_V1_LogicalDriveInformationArray_T)); - } - else if (CommandOpcode == DAC960_V1_GetRebuildProgress) - { - unsigned int LogicalDriveNumber = - Controller->V1.RebuildProgress->LogicalDriveNumber; - unsigned int LogicalDriveSize = - Controller->V1.RebuildProgress->LogicalDriveSize; - unsigned int BlocksCompleted = - LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks; - if (CommandStatus == DAC960_V1_NoRebuildOrCheckInProgress && - Controller->V1.LastRebuildStatus == DAC960_V1_NormalCompletion) - CommandStatus = DAC960_V1_RebuildSuccessful; - switch (CommandStatus) - { - case DAC960_V1_NormalCompletion: - Controller->EphemeralProgressMessage = true; - DAC960_Progress("Rebuild in Progress: " - "Logical Drive %d (/dev/rd/c%dd%d) " - "%d%% completed\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (100 * (BlocksCompleted >> 7)) - / (LogicalDriveSize >> 7)); - Controller->EphemeralProgressMessage = false; - break; - case DAC960_V1_RebuildFailed_LogicalDriveFailure: - DAC960_Progress("Rebuild Failed due to " - "Logical Drive Failure\n", Controller); - break; - case DAC960_V1_RebuildFailed_BadBlocksOnOther: - DAC960_Progress("Rebuild Failed due to " - "Bad Blocks on Other Drives\n", Controller); - break; - case DAC960_V1_RebuildFailed_NewDriveFailed: - DAC960_Progress("Rebuild Failed due to " - "Failure of Drive Being Rebuilt\n", Controller); - break; - case DAC960_V1_NoRebuildOrCheckInProgress: - break; - case DAC960_V1_RebuildSuccessful: - DAC960_Progress("Rebuild Completed Successfully\n", Controller); - break; - case DAC960_V1_RebuildSuccessfullyTerminated: - DAC960_Progress("Rebuild Successfully Terminated\n", Controller); - break; - } - Controller->V1.LastRebuildStatus = CommandStatus; - if (CommandType != DAC960_MonitoringCommand && - Controller->V1.RebuildStatusPending) - { - Command->V1.CommandStatus = Controller->V1.PendingRebuildStatus; - Controller->V1.RebuildStatusPending = false; - } - else if (CommandType == DAC960_MonitoringCommand && - CommandStatus != DAC960_V1_NormalCompletion && - CommandStatus != DAC960_V1_NoRebuildOrCheckInProgress) - { - Controller->V1.PendingRebuildStatus = CommandStatus; - Controller->V1.RebuildStatusPending = true; - } - } - else if (CommandOpcode == DAC960_V1_RebuildStat) - { - unsigned int LogicalDriveNumber = - Controller->V1.RebuildProgress->LogicalDriveNumber; - unsigned int LogicalDriveSize = - Controller->V1.RebuildProgress->LogicalDriveSize; - unsigned int BlocksCompleted = - LogicalDriveSize - Controller->V1.RebuildProgress->RemainingBlocks; - if (CommandStatus == DAC960_V1_NormalCompletion) - { - Controller->EphemeralProgressMessage = true; - DAC960_Progress("Consistency Check in Progress: " - "Logical Drive %d (/dev/rd/c%dd%d) " - "%d%% completed\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (100 * (BlocksCompleted >> 7)) - / (LogicalDriveSize >> 7)); - Controller->EphemeralProgressMessage = false; - } - } - else if (CommandOpcode == DAC960_V1_BackgroundInitializationControl) - { - unsigned int LogicalDriveNumber = - Controller->V1.BackgroundInitializationStatus->LogicalDriveNumber; - unsigned int LogicalDriveSize = - Controller->V1.BackgroundInitializationStatus->LogicalDriveSize; - unsigned int BlocksCompleted = - Controller->V1.BackgroundInitializationStatus->BlocksCompleted; - switch (CommandStatus) - { - case DAC960_V1_NormalCompletion: - switch (Controller->V1.BackgroundInitializationStatus->Status) - { - case DAC960_V1_BackgroundInitializationInvalid: - break; - case DAC960_V1_BackgroundInitializationStarted: - DAC960_Progress("Background Initialization Started\n", - Controller); - break; - case DAC960_V1_BackgroundInitializationInProgress: - if (BlocksCompleted == - Controller->V1.LastBackgroundInitializationStatus. - BlocksCompleted && - LogicalDriveNumber == - Controller->V1.LastBackgroundInitializationStatus. - LogicalDriveNumber) - break; - Controller->EphemeralProgressMessage = true; - DAC960_Progress("Background Initialization in Progress: " - "Logical Drive %d (/dev/rd/c%dd%d) " - "%d%% completed\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (100 * (BlocksCompleted >> 7)) - / (LogicalDriveSize >> 7)); - Controller->EphemeralProgressMessage = false; - break; - case DAC960_V1_BackgroundInitializationSuspended: - DAC960_Progress("Background Initialization Suspended\n", - Controller); - break; - case DAC960_V1_BackgroundInitializationCancelled: - DAC960_Progress("Background Initialization Cancelled\n", - Controller); - break; - } - memcpy(&Controller->V1.LastBackgroundInitializationStatus, - Controller->V1.BackgroundInitializationStatus, - sizeof(DAC960_V1_BackgroundInitializationStatus_T)); - break; - case DAC960_V1_BackgroundInitSuccessful: - if (Controller->V1.BackgroundInitializationStatus->Status == - DAC960_V1_BackgroundInitializationInProgress) - DAC960_Progress("Background Initialization " - "Completed Successfully\n", Controller); - Controller->V1.BackgroundInitializationStatus->Status = - DAC960_V1_BackgroundInitializationInvalid; - break; - case DAC960_V1_BackgroundInitAborted: - if (Controller->V1.BackgroundInitializationStatus->Status == - DAC960_V1_BackgroundInitializationInProgress) - DAC960_Progress("Background Initialization Aborted\n", - Controller); - Controller->V1.BackgroundInitializationStatus->Status = - DAC960_V1_BackgroundInitializationInvalid; - break; - case DAC960_V1_NoBackgroundInitInProgress: - break; - } - } - else if (CommandOpcode == DAC960_V1_DCDB) - { - /* - This is a bit ugly. - - The InquiryStandardData and - the InquiryUntitSerialNumber information - retrieval operations BOTH use the DAC960_V1_DCDB - commands. the test above can't distinguish between - these two cases. - - Instead, we rely on the order of code later in this - function to ensure that DeviceInquiryInformation commands - are submitted before DeviceSerialNumber commands. - */ - if (Controller->V1.NeedDeviceInquiryInformation) - { - DAC960_SCSI_Inquiry_T *InquiryStandardData = - &Controller->V1.InquiryStandardData - [Controller->V1.DeviceStateChannel] - [Controller->V1.DeviceStateTargetID]; - if (CommandStatus != DAC960_V1_NormalCompletion) - { - memset(InquiryStandardData, 0, - sizeof(DAC960_SCSI_Inquiry_T)); - InquiryStandardData->PeripheralDeviceType = 0x1F; - } - else - memcpy(InquiryStandardData, - Controller->V1.NewInquiryStandardData, - sizeof(DAC960_SCSI_Inquiry_T)); - Controller->V1.NeedDeviceInquiryInformation = false; - } - else if (Controller->V1.NeedDeviceSerialNumberInformation) - { - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - &Controller->V1.InquiryUnitSerialNumber - [Controller->V1.DeviceStateChannel] - [Controller->V1.DeviceStateTargetID]; - if (CommandStatus != DAC960_V1_NormalCompletion) - { - memset(InquiryUnitSerialNumber, 0, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; - } - else - memcpy(InquiryUnitSerialNumber, - Controller->V1.NewInquiryUnitSerialNumber, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - Controller->V1.NeedDeviceSerialNumberInformation = false; - } - } - /* - Begin submitting new monitoring commands. - */ - if (Controller->V1.NewEventLogSequenceNumber - - Controller->V1.OldEventLogSequenceNumber > 0) - { - Command->V1.CommandMailbox.Type3E.CommandOpcode = - DAC960_V1_PerformEventLogOperation; - Command->V1.CommandMailbox.Type3E.OperationType = - DAC960_V1_GetEventLogEntry; - Command->V1.CommandMailbox.Type3E.OperationQualifier = 1; - Command->V1.CommandMailbox.Type3E.SequenceNumber = - Controller->V1.OldEventLogSequenceNumber; - Command->V1.CommandMailbox.Type3E.BusAddress = - Controller->V1.EventLogEntryDMA; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedErrorTableInformation) - { - Controller->V1.NeedErrorTableInformation = false; - Command->V1.CommandMailbox.Type3.CommandOpcode = - DAC960_V1_GetErrorTable; - Command->V1.CommandMailbox.Type3.BusAddress = - Controller->V1.NewErrorTableDMA; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedRebuildProgress && - Controller->V1.RebuildProgressFirst) - { - Controller->V1.NeedRebuildProgress = false; - Command->V1.CommandMailbox.Type3.CommandOpcode = - DAC960_V1_GetRebuildProgress; - Command->V1.CommandMailbox.Type3.BusAddress = - Controller->V1.RebuildProgressDMA; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedDeviceStateInformation) - { - if (Controller->V1.NeedDeviceInquiryInformation) - { - DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB; - dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA; - - dma_addr_t NewInquiryStandardDataDMA = - Controller->V1.NewInquiryStandardDataDMA; - - Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB; - Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA; - DCDB->Channel = Controller->V1.DeviceStateChannel; - DCDB->TargetID = Controller->V1.DeviceStateTargetID; - DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem; - DCDB->EarlyStatus = false; - DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds; - DCDB->NoAutomaticRequestSense = false; - DCDB->DisconnectPermitted = true; - DCDB->TransferLength = sizeof(DAC960_SCSI_Inquiry_T); - DCDB->BusAddress = NewInquiryStandardDataDMA; - DCDB->CDBLength = 6; - DCDB->TransferLengthHigh4 = 0; - DCDB->SenseLength = sizeof(DCDB->SenseData); - DCDB->CDB[0] = 0x12; /* INQUIRY */ - DCDB->CDB[1] = 0; /* EVPD = 0 */ - DCDB->CDB[2] = 0; /* Page Code */ - DCDB->CDB[3] = 0; /* Reserved */ - DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_T); - DCDB->CDB[5] = 0; /* Control */ - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedDeviceSerialNumberInformation) - { - DAC960_V1_DCDB_T *DCDB = Controller->V1.MonitoringDCDB; - dma_addr_t DCDB_DMA = Controller->V1.MonitoringDCDB_DMA; - dma_addr_t NewInquiryUnitSerialNumberDMA = - Controller->V1.NewInquiryUnitSerialNumberDMA; - - Command->V1.CommandMailbox.Type3.CommandOpcode = DAC960_V1_DCDB; - Command->V1.CommandMailbox.Type3.BusAddress = DCDB_DMA; - DCDB->Channel = Controller->V1.DeviceStateChannel; - DCDB->TargetID = Controller->V1.DeviceStateTargetID; - DCDB->Direction = DAC960_V1_DCDB_DataTransferDeviceToSystem; - DCDB->EarlyStatus = false; - DCDB->Timeout = DAC960_V1_DCDB_Timeout_10_seconds; - DCDB->NoAutomaticRequestSense = false; - DCDB->DisconnectPermitted = true; - DCDB->TransferLength = - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - DCDB->BusAddress = NewInquiryUnitSerialNumberDMA; - DCDB->CDBLength = 6; - DCDB->TransferLengthHigh4 = 0; - DCDB->SenseLength = sizeof(DCDB->SenseData); - DCDB->CDB[0] = 0x12; /* INQUIRY */ - DCDB->CDB[1] = 1; /* EVPD = 1 */ - DCDB->CDB[2] = 0x80; /* Page Code */ - DCDB->CDB[3] = 0; /* Reserved */ - DCDB->CDB[4] = sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T); - DCDB->CDB[5] = 0; /* Control */ - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.StartDeviceStateScan) - { - Controller->V1.DeviceStateChannel = 0; - Controller->V1.DeviceStateTargetID = 0; - Controller->V1.StartDeviceStateScan = false; - } - else if (++Controller->V1.DeviceStateTargetID == Controller->Targets) - { - Controller->V1.DeviceStateChannel++; - Controller->V1.DeviceStateTargetID = 0; - } - if (Controller->V1.DeviceStateChannel < Controller->Channels) - { - Controller->V1.NewDeviceState->DeviceState = - DAC960_V1_Device_Dead; - Command->V1.CommandMailbox.Type3D.CommandOpcode = - DAC960_V1_GetDeviceState; - Command->V1.CommandMailbox.Type3D.Channel = - Controller->V1.DeviceStateChannel; - Command->V1.CommandMailbox.Type3D.TargetID = - Controller->V1.DeviceStateTargetID; - Command->V1.CommandMailbox.Type3D.BusAddress = - Controller->V1.NewDeviceStateDMA; - DAC960_QueueCommand(Command); - return; - } - Controller->V1.NeedDeviceStateInformation = false; - } - if (Controller->V1.NeedLogicalDriveInformation) - { - Controller->V1.NeedLogicalDriveInformation = false; - Command->V1.CommandMailbox.Type3.CommandOpcode = - DAC960_V1_GetLogicalDriveInformation; - Command->V1.CommandMailbox.Type3.BusAddress = - Controller->V1.NewLogicalDriveInformationDMA; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedRebuildProgress) - { - Controller->V1.NeedRebuildProgress = false; - Command->V1.CommandMailbox.Type3.CommandOpcode = - DAC960_V1_GetRebuildProgress; - Command->V1.CommandMailbox.Type3.BusAddress = - Controller->V1.RebuildProgressDMA; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedConsistencyCheckProgress) - { - Controller->V1.NeedConsistencyCheckProgress = false; - Command->V1.CommandMailbox.Type3.CommandOpcode = - DAC960_V1_RebuildStat; - Command->V1.CommandMailbox.Type3.BusAddress = - Controller->V1.RebuildProgressDMA; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V1.NeedBackgroundInitializationStatus) - { - Controller->V1.NeedBackgroundInitializationStatus = false; - Command->V1.CommandMailbox.Type3B.CommandOpcode = - DAC960_V1_BackgroundInitializationControl; - Command->V1.CommandMailbox.Type3B.CommandOpcode2 = 0x20; - Command->V1.CommandMailbox.Type3B.BusAddress = - Controller->V1.BackgroundInitializationStatusDMA; - DAC960_QueueCommand(Command); - return; - } - Controller->MonitoringTimerCount++; - Controller->MonitoringTimer.expires = - jiffies + DAC960_MonitoringTimerInterval; - add_timer(&Controller->MonitoringTimer); - } - if (CommandType == DAC960_ImmediateCommand) - { - complete(Command->Completion); - Command->Completion = NULL; - return; - } - if (CommandType == DAC960_QueuedCommand) - { - DAC960_V1_KernelCommand_T *KernelCommand = Command->V1.KernelCommand; - KernelCommand->CommandStatus = Command->V1.CommandStatus; - Command->V1.KernelCommand = NULL; - if (CommandOpcode == DAC960_V1_DCDB) - Controller->V1.DirectCommandActive[KernelCommand->DCDB->Channel] - [KernelCommand->DCDB->TargetID] = - false; - DAC960_DeallocateCommand(Command); - KernelCommand->CompletionFunction(KernelCommand); - return; - } - /* - Queue a Status Monitoring Command to the Controller using the just - completed Command if one was deferred previously due to lack of a - free Command when the Monitoring Timer Function was called. - */ - if (Controller->MonitoringCommandDeferred) - { - Controller->MonitoringCommandDeferred = false; - DAC960_V1_QueueMonitoringCommand(Command); - return; - } - /* - Deallocate the Command. - */ - DAC960_DeallocateCommand(Command); - /* - Wake up any processes waiting on a free Command. - */ - wake_up(&Controller->CommandWaitQueue); -} - - -/* - DAC960_V2_ReadWriteError prints an appropriate error message for Command - when an error occurs on a Read or Write operation. -*/ - -static void DAC960_V2_ReadWriteError(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - static const unsigned char *SenseErrors[] = { - "NO SENSE", "RECOVERED ERROR", - "NOT READY", "MEDIUM ERROR", - "HARDWARE ERROR", "ILLEGAL REQUEST", - "UNIT ATTENTION", "DATA PROTECT", - "BLANK CHECK", "VENDOR-SPECIFIC", - "COPY ABORTED", "ABORTED COMMAND", - "EQUAL", "VOLUME OVERFLOW", - "MISCOMPARE", "RESERVED" - }; - unsigned char *CommandName = "UNKNOWN"; - switch (Command->CommandType) - { - case DAC960_ReadCommand: - case DAC960_ReadRetryCommand: - CommandName = "READ"; - break; - case DAC960_WriteCommand: - case DAC960_WriteRetryCommand: - CommandName = "WRITE"; - break; - case DAC960_MonitoringCommand: - case DAC960_ImmediateCommand: - case DAC960_QueuedCommand: - break; - } - DAC960_Error("Error Condition %s on %s:\n", Controller, - SenseErrors[Command->V2.RequestSense->SenseKey], CommandName); - DAC960_Error(" /dev/rd/c%dd%d: absolute blocks %u..%u\n", - Controller, Controller->ControllerNumber, - Command->LogicalDriveNumber, Command->BlockNumber, - Command->BlockNumber + Command->BlockCount - 1); -} - - -/* - DAC960_V2_ReportEvent prints an appropriate message when a Controller Event - occurs. -*/ - -static void DAC960_V2_ReportEvent(DAC960_Controller_T *Controller, - DAC960_V2_Event_T *Event) -{ - DAC960_SCSI_RequestSense_T *RequestSense = - (DAC960_SCSI_RequestSense_T *) &Event->RequestSenseData; - unsigned char MessageBuffer[DAC960_LineBufferSize]; - static struct { int EventCode; unsigned char *EventMessage; } EventList[] = - { /* Physical Device Events (0x0000 - 0x007F) */ - { 0x0001, "P Online" }, - { 0x0002, "P Standby" }, - { 0x0005, "P Automatic Rebuild Started" }, - { 0x0006, "P Manual Rebuild Started" }, - { 0x0007, "P Rebuild Completed" }, - { 0x0008, "P Rebuild Cancelled" }, - { 0x0009, "P Rebuild Failed for Unknown Reasons" }, - { 0x000A, "P Rebuild Failed due to New Physical Device" }, - { 0x000B, "P Rebuild Failed due to Logical Drive Failure" }, - { 0x000C, "S Offline" }, - { 0x000D, "P Found" }, - { 0x000E, "P Removed" }, - { 0x000F, "P Unconfigured" }, - { 0x0010, "P Expand Capacity Started" }, - { 0x0011, "P Expand Capacity Completed" }, - { 0x0012, "P Expand Capacity Failed" }, - { 0x0013, "P Command Timed Out" }, - { 0x0014, "P Command Aborted" }, - { 0x0015, "P Command Retried" }, - { 0x0016, "P Parity Error" }, - { 0x0017, "P Soft Error" }, - { 0x0018, "P Miscellaneous Error" }, - { 0x0019, "P Reset" }, - { 0x001A, "P Active Spare Found" }, - { 0x001B, "P Warm Spare Found" }, - { 0x001C, "S Sense Data Received" }, - { 0x001D, "P Initialization Started" }, - { 0x001E, "P Initialization Completed" }, - { 0x001F, "P Initialization Failed" }, - { 0x0020, "P Initialization Cancelled" }, - { 0x0021, "P Failed because Write Recovery Failed" }, - { 0x0022, "P Failed because SCSI Bus Reset Failed" }, - { 0x0023, "P Failed because of Double Check Condition" }, - { 0x0024, "P Failed because Device Cannot Be Accessed" }, - { 0x0025, "P Failed because of Gross Error on SCSI Processor" }, - { 0x0026, "P Failed because of Bad Tag from Device" }, - { 0x0027, "P Failed because of Command Timeout" }, - { 0x0028, "P Failed because of System Reset" }, - { 0x0029, "P Failed because of Busy Status or Parity Error" }, - { 0x002A, "P Failed because Host Set Device to Failed State" }, - { 0x002B, "P Failed because of Selection Timeout" }, - { 0x002C, "P Failed because of SCSI Bus Phase Error" }, - { 0x002D, "P Failed because Device Returned Unknown Status" }, - { 0x002E, "P Failed because Device Not Ready" }, - { 0x002F, "P Failed because Device Not Found at Startup" }, - { 0x0030, "P Failed because COD Write Operation Failed" }, - { 0x0031, "P Failed because BDT Write Operation Failed" }, - { 0x0039, "P Missing at Startup" }, - { 0x003A, "P Start Rebuild Failed due to Physical Drive Too Small" }, - { 0x003C, "P Temporarily Offline Device Automatically Made Online" }, - { 0x003D, "P Standby Rebuild Started" }, - /* Logical Device Events (0x0080 - 0x00FF) */ - { 0x0080, "M Consistency Check Started" }, - { 0x0081, "M Consistency Check Completed" }, - { 0x0082, "M Consistency Check Cancelled" }, - { 0x0083, "M Consistency Check Completed With Errors" }, - { 0x0084, "M Consistency Check Failed due to Logical Drive Failure" }, - { 0x0085, "M Consistency Check Failed due to Physical Device Failure" }, - { 0x0086, "L Offline" }, - { 0x0087, "L Critical" }, - { 0x0088, "L Online" }, - { 0x0089, "M Automatic Rebuild Started" }, - { 0x008A, "M Manual Rebuild Started" }, - { 0x008B, "M Rebuild Completed" }, - { 0x008C, "M Rebuild Cancelled" }, - { 0x008D, "M Rebuild Failed for Unknown Reasons" }, - { 0x008E, "M Rebuild Failed due to New Physical Device" }, - { 0x008F, "M Rebuild Failed due to Logical Drive Failure" }, - { 0x0090, "M Initialization Started" }, - { 0x0091, "M Initialization Completed" }, - { 0x0092, "M Initialization Cancelled" }, - { 0x0093, "M Initialization Failed" }, - { 0x0094, "L Found" }, - { 0x0095, "L Deleted" }, - { 0x0096, "M Expand Capacity Started" }, - { 0x0097, "M Expand Capacity Completed" }, - { 0x0098, "M Expand Capacity Failed" }, - { 0x0099, "L Bad Block Found" }, - { 0x009A, "L Size Changed" }, - { 0x009B, "L Type Changed" }, - { 0x009C, "L Bad Data Block Found" }, - { 0x009E, "L Read of Data Block in BDT" }, - { 0x009F, "L Write Back Data for Disk Block Lost" }, - { 0x00A0, "L Temporarily Offline RAID-5/3 Drive Made Online" }, - { 0x00A1, "L Temporarily Offline RAID-6/1/0/7 Drive Made Online" }, - { 0x00A2, "L Standby Rebuild Started" }, - /* Fault Management Events (0x0100 - 0x017F) */ - { 0x0140, "E Fan %d Failed" }, - { 0x0141, "E Fan %d OK" }, - { 0x0142, "E Fan %d Not Present" }, - { 0x0143, "E Power Supply %d Failed" }, - { 0x0144, "E Power Supply %d OK" }, - { 0x0145, "E Power Supply %d Not Present" }, - { 0x0146, "E Temperature Sensor %d Temperature Exceeds Safe Limit" }, - { 0x0147, "E Temperature Sensor %d Temperature Exceeds Working Limit" }, - { 0x0148, "E Temperature Sensor %d Temperature Normal" }, - { 0x0149, "E Temperature Sensor %d Not Present" }, - { 0x014A, "E Enclosure Management Unit %d Access Critical" }, - { 0x014B, "E Enclosure Management Unit %d Access OK" }, - { 0x014C, "E Enclosure Management Unit %d Access Offline" }, - /* Controller Events (0x0180 - 0x01FF) */ - { 0x0181, "C Cache Write Back Error" }, - { 0x0188, "C Battery Backup Unit Found" }, - { 0x0189, "C Battery Backup Unit Charge Level Low" }, - { 0x018A, "C Battery Backup Unit Charge Level OK" }, - { 0x0193, "C Installation Aborted" }, - { 0x0195, "C Battery Backup Unit Physically Removed" }, - { 0x0196, "C Memory Error During Warm Boot" }, - { 0x019E, "C Memory Soft ECC Error Corrected" }, - { 0x019F, "C Memory Hard ECC Error Corrected" }, - { 0x01A2, "C Battery Backup Unit Failed" }, - { 0x01AB, "C Mirror Race Recovery Failed" }, - { 0x01AC, "C Mirror Race on Critical Drive" }, - /* Controller Internal Processor Events */ - { 0x0380, "C Internal Controller Hung" }, - { 0x0381, "C Internal Controller Firmware Breakpoint" }, - { 0x0390, "C Internal Controller i960 Processor Specific Error" }, - { 0x03A0, "C Internal Controller StrongARM Processor Specific Error" }, - { 0, "" } }; - int EventListIndex = 0, EventCode; - unsigned char EventType, *EventMessage; - if (Event->EventCode == 0x1C && - RequestSense->SenseKey == DAC960_SenseKey_VendorSpecific && - (RequestSense->AdditionalSenseCode == 0x80 || - RequestSense->AdditionalSenseCode == 0x81)) - Event->EventCode = ((RequestSense->AdditionalSenseCode - 0x80) << 8) | - RequestSense->AdditionalSenseCodeQualifier; - while (true) - { - EventCode = EventList[EventListIndex].EventCode; - if (EventCode == Event->EventCode || EventCode == 0) break; - EventListIndex++; - } - EventType = EventList[EventListIndex].EventMessage[0]; - EventMessage = &EventList[EventListIndex].EventMessage[2]; - if (EventCode == 0) - { - DAC960_Critical("Unknown Controller Event Code %04X\n", - Controller, Event->EventCode); - return; - } - switch (EventType) - { - case 'P': - DAC960_Critical("Physical Device %d:%d %s\n", Controller, - Event->Channel, Event->TargetID, EventMessage); - break; - case 'L': - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller, - Event->LogicalUnit, Controller->ControllerNumber, - Event->LogicalUnit, EventMessage); - break; - case 'M': - DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) %s\n", Controller, - Event->LogicalUnit, Controller->ControllerNumber, - Event->LogicalUnit, EventMessage); - break; - case 'S': - if (RequestSense->SenseKey == DAC960_SenseKey_NoSense || - (RequestSense->SenseKey == DAC960_SenseKey_NotReady && - RequestSense->AdditionalSenseCode == 0x04 && - (RequestSense->AdditionalSenseCodeQualifier == 0x01 || - RequestSense->AdditionalSenseCodeQualifier == 0x02))) - break; - DAC960_Critical("Physical Device %d:%d %s\n", Controller, - Event->Channel, Event->TargetID, EventMessage); - DAC960_Critical("Physical Device %d:%d Request Sense: " - "Sense Key = %X, ASC = %02X, ASCQ = %02X\n", - Controller, - Event->Channel, - Event->TargetID, - RequestSense->SenseKey, - RequestSense->AdditionalSenseCode, - RequestSense->AdditionalSenseCodeQualifier); - DAC960_Critical("Physical Device %d:%d Request Sense: " - "Information = %02X%02X%02X%02X " - "%02X%02X%02X%02X\n", - Controller, - Event->Channel, - Event->TargetID, - RequestSense->Information[0], - RequestSense->Information[1], - RequestSense->Information[2], - RequestSense->Information[3], - RequestSense->CommandSpecificInformation[0], - RequestSense->CommandSpecificInformation[1], - RequestSense->CommandSpecificInformation[2], - RequestSense->CommandSpecificInformation[3]); - break; - case 'E': - if (Controller->SuppressEnclosureMessages) break; - sprintf(MessageBuffer, EventMessage, Event->LogicalUnit); - DAC960_Critical("Enclosure %d %s\n", Controller, - Event->TargetID, MessageBuffer); - break; - case 'C': - DAC960_Critical("Controller %s\n", Controller, EventMessage); - break; - default: - DAC960_Critical("Unknown Controller Event Code %04X\n", - Controller, Event->EventCode); - break; - } -} - - -/* - DAC960_V2_ReportProgress prints an appropriate progress message for - Logical Device Long Operations. -*/ - -static void DAC960_V2_ReportProgress(DAC960_Controller_T *Controller, - unsigned char *MessageString, - unsigned int LogicalDeviceNumber, - unsigned long BlocksCompleted, - unsigned long LogicalDeviceSize) -{ - Controller->EphemeralProgressMessage = true; - DAC960_Progress("%s in Progress: Logical Drive %d (/dev/rd/c%dd%d) " - "%d%% completed\n", Controller, - MessageString, - LogicalDeviceNumber, - Controller->ControllerNumber, - LogicalDeviceNumber, - (100 * (BlocksCompleted >> 7)) / (LogicalDeviceSize >> 7)); - Controller->EphemeralProgressMessage = false; -} - - -/* - DAC960_V2_ProcessCompletedCommand performs completion processing for Command - for DAC960 V2 Firmware Controllers. -*/ - -static void DAC960_V2_ProcessCompletedCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DAC960_CommandType_T CommandType = Command->CommandType; - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_IOCTL_Opcode_T IOCTLOpcode = CommandMailbox->Common.IOCTL_Opcode; - DAC960_V2_CommandOpcode_T CommandOpcode = CommandMailbox->SCSI_10.CommandOpcode; - DAC960_V2_CommandStatus_T CommandStatus = Command->V2.CommandStatus; - - if (CommandType == DAC960_ReadCommand || - CommandType == DAC960_WriteCommand) - { - -#ifdef FORCE_RETRY_DEBUG - CommandStatus = DAC960_V2_AbormalCompletion; -#endif - Command->V2.RequestSense->SenseKey = DAC960_SenseKey_MediumError; - - if (CommandStatus == DAC960_V2_NormalCompletion) { - - if (!DAC960_ProcessCompletedRequest(Command, true)) - BUG(); - - } else if (Command->V2.RequestSense->SenseKey == DAC960_SenseKey_MediumError) - { - /* - * break the command down into pieces and resubmit each - * piece, hoping that some of them will succeed. - */ - DAC960_queue_partial_rw(Command); - return; - } - else - { - if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady) - DAC960_V2_ReadWriteError(Command); - /* - Perform completion processing for all buffers in this I/O Request. - */ - (void)DAC960_ProcessCompletedRequest(Command, false); - } - } - else if (CommandType == DAC960_ReadRetryCommand || - CommandType == DAC960_WriteRetryCommand) - { - bool normal_completion; - -#ifdef FORCE_RETRY_FAILURE_DEBUG - static int retry_count = 1; -#endif - /* - Perform completion processing for the portion that was - retried, and submit the next portion, if any. - */ - normal_completion = true; - if (CommandStatus != DAC960_V2_NormalCompletion) { - normal_completion = false; - if (Command->V2.RequestSense->SenseKey != DAC960_SenseKey_NotReady) - DAC960_V2_ReadWriteError(Command); - } - -#ifdef FORCE_RETRY_FAILURE_DEBUG - if (!(++retry_count % 10000)) { - printk("V2 error retry failure test\n"); - normal_completion = false; - DAC960_V2_ReadWriteError(Command); - } -#endif - - if (!DAC960_ProcessCompletedRequest(Command, normal_completion)) { - DAC960_queue_partial_rw(Command); - return; - } - } - else if (CommandType == DAC960_MonitoringCommand) - { - if (Controller->ShutdownMonitoringTimer) - return; - if (IOCTLOpcode == DAC960_V2_GetControllerInfo) - { - DAC960_V2_ControllerInfo_T *NewControllerInfo = - Controller->V2.NewControllerInformation; - DAC960_V2_ControllerInfo_T *ControllerInfo = - &Controller->V2.ControllerInformation; - Controller->LogicalDriveCount = - NewControllerInfo->LogicalDevicesPresent; - Controller->V2.NeedLogicalDeviceInformation = true; - Controller->V2.NeedPhysicalDeviceInformation = true; - Controller->V2.StartLogicalDeviceInformationScan = true; - Controller->V2.StartPhysicalDeviceInformationScan = true; - Controller->MonitoringAlertMode = - (NewControllerInfo->LogicalDevicesCritical > 0 || - NewControllerInfo->LogicalDevicesOffline > 0 || - NewControllerInfo->PhysicalDisksCritical > 0 || - NewControllerInfo->PhysicalDisksOffline > 0); - memcpy(ControllerInfo, NewControllerInfo, - sizeof(DAC960_V2_ControllerInfo_T)); - } - else if (IOCTLOpcode == DAC960_V2_GetEvent) - { - if (CommandStatus == DAC960_V2_NormalCompletion) { - DAC960_V2_ReportEvent(Controller, Controller->V2.Event); - } - Controller->V2.NextEventSequenceNumber++; - } - else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid && - CommandStatus == DAC960_V2_NormalCompletion) - { - DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInfo = - Controller->V2.NewPhysicalDeviceInformation; - unsigned int PhysicalDeviceIndex = Controller->V2.PhysicalDeviceIndex; - DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo = - Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex]; - unsigned int DeviceIndex; - while (PhysicalDeviceInfo != NULL && - (NewPhysicalDeviceInfo->Channel > - PhysicalDeviceInfo->Channel || - (NewPhysicalDeviceInfo->Channel == - PhysicalDeviceInfo->Channel && - (NewPhysicalDeviceInfo->TargetID > - PhysicalDeviceInfo->TargetID || - (NewPhysicalDeviceInfo->TargetID == - PhysicalDeviceInfo->TargetID && - NewPhysicalDeviceInfo->LogicalUnit > - PhysicalDeviceInfo->LogicalUnit))))) - { - DAC960_Critical("Physical Device %d:%d No Longer Exists\n", - Controller, - PhysicalDeviceInfo->Channel, - PhysicalDeviceInfo->TargetID); - Controller->V2.PhysicalDeviceInformation - [PhysicalDeviceIndex] = NULL; - Controller->V2.InquiryUnitSerialNumber - [PhysicalDeviceIndex] = NULL; - kfree(PhysicalDeviceInfo); - kfree(InquiryUnitSerialNumber); - for (DeviceIndex = PhysicalDeviceIndex; - DeviceIndex < DAC960_V2_MaxPhysicalDevices - 1; - DeviceIndex++) - { - Controller->V2.PhysicalDeviceInformation[DeviceIndex] = - Controller->V2.PhysicalDeviceInformation[DeviceIndex+1]; - Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = - Controller->V2.InquiryUnitSerialNumber[DeviceIndex+1]; - } - Controller->V2.PhysicalDeviceInformation - [DAC960_V2_MaxPhysicalDevices-1] = NULL; - Controller->V2.InquiryUnitSerialNumber - [DAC960_V2_MaxPhysicalDevices-1] = NULL; - PhysicalDeviceInfo = - Controller->V2.PhysicalDeviceInformation[PhysicalDeviceIndex]; - InquiryUnitSerialNumber = - Controller->V2.InquiryUnitSerialNumber[PhysicalDeviceIndex]; - } - if (PhysicalDeviceInfo == NULL || - (NewPhysicalDeviceInfo->Channel != - PhysicalDeviceInfo->Channel) || - (NewPhysicalDeviceInfo->TargetID != - PhysicalDeviceInfo->TargetID) || - (NewPhysicalDeviceInfo->LogicalUnit != - PhysicalDeviceInfo->LogicalUnit)) - { - PhysicalDeviceInfo = - kmalloc(sizeof(DAC960_V2_PhysicalDeviceInfo_T), GFP_ATOMIC); - InquiryUnitSerialNumber = - kmalloc(sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T), - GFP_ATOMIC); - if (InquiryUnitSerialNumber == NULL || - PhysicalDeviceInfo == NULL) - { - kfree(InquiryUnitSerialNumber); - InquiryUnitSerialNumber = NULL; - kfree(PhysicalDeviceInfo); - PhysicalDeviceInfo = NULL; - } - DAC960_Critical("Physical Device %d:%d Now Exists%s\n", - Controller, - NewPhysicalDeviceInfo->Channel, - NewPhysicalDeviceInfo->TargetID, - (PhysicalDeviceInfo != NULL - ? "" : " - Allocation Failed")); - if (PhysicalDeviceInfo != NULL) - { - memset(PhysicalDeviceInfo, 0, - sizeof(DAC960_V2_PhysicalDeviceInfo_T)); - PhysicalDeviceInfo->PhysicalDeviceState = - DAC960_V2_Device_InvalidState; - memset(InquiryUnitSerialNumber, 0, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; - for (DeviceIndex = DAC960_V2_MaxPhysicalDevices - 1; - DeviceIndex > PhysicalDeviceIndex; - DeviceIndex--) - { - Controller->V2.PhysicalDeviceInformation[DeviceIndex] = - Controller->V2.PhysicalDeviceInformation[DeviceIndex-1]; - Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = - Controller->V2.InquiryUnitSerialNumber[DeviceIndex-1]; - } - Controller->V2.PhysicalDeviceInformation - [PhysicalDeviceIndex] = - PhysicalDeviceInfo; - Controller->V2.InquiryUnitSerialNumber - [PhysicalDeviceIndex] = - InquiryUnitSerialNumber; - Controller->V2.NeedDeviceSerialNumberInformation = true; - } - } - if (PhysicalDeviceInfo != NULL) - { - if (NewPhysicalDeviceInfo->PhysicalDeviceState != - PhysicalDeviceInfo->PhysicalDeviceState) - DAC960_Critical( - "Physical Device %d:%d is now %s\n", Controller, - NewPhysicalDeviceInfo->Channel, - NewPhysicalDeviceInfo->TargetID, - (NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Online - ? "ONLINE" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Rebuild - ? "REBUILD" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Missing - ? "MISSING" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Critical - ? "CRITICAL" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Dead - ? "DEAD" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_SuspectedDead - ? "SUSPECTED-DEAD" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_CommandedOffline - ? "COMMANDED-OFFLINE" - : NewPhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Standby - ? "STANDBY" : "UNKNOWN")); - if ((NewPhysicalDeviceInfo->ParityErrors != - PhysicalDeviceInfo->ParityErrors) || - (NewPhysicalDeviceInfo->SoftErrors != - PhysicalDeviceInfo->SoftErrors) || - (NewPhysicalDeviceInfo->HardErrors != - PhysicalDeviceInfo->HardErrors) || - (NewPhysicalDeviceInfo->MiscellaneousErrors != - PhysicalDeviceInfo->MiscellaneousErrors) || - (NewPhysicalDeviceInfo->CommandTimeouts != - PhysicalDeviceInfo->CommandTimeouts) || - (NewPhysicalDeviceInfo->Retries != - PhysicalDeviceInfo->Retries) || - (NewPhysicalDeviceInfo->Aborts != - PhysicalDeviceInfo->Aborts) || - (NewPhysicalDeviceInfo->PredictedFailuresDetected != - PhysicalDeviceInfo->PredictedFailuresDetected)) - { - DAC960_Critical("Physical Device %d:%d Errors: " - "Parity = %d, Soft = %d, " - "Hard = %d, Misc = %d\n", - Controller, - NewPhysicalDeviceInfo->Channel, - NewPhysicalDeviceInfo->TargetID, - NewPhysicalDeviceInfo->ParityErrors, - NewPhysicalDeviceInfo->SoftErrors, - NewPhysicalDeviceInfo->HardErrors, - NewPhysicalDeviceInfo->MiscellaneousErrors); - DAC960_Critical("Physical Device %d:%d Errors: " - "Timeouts = %d, Retries = %d, " - "Aborts = %d, Predicted = %d\n", - Controller, - NewPhysicalDeviceInfo->Channel, - NewPhysicalDeviceInfo->TargetID, - NewPhysicalDeviceInfo->CommandTimeouts, - NewPhysicalDeviceInfo->Retries, - NewPhysicalDeviceInfo->Aborts, - NewPhysicalDeviceInfo - ->PredictedFailuresDetected); - } - if ((PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_Dead || - PhysicalDeviceInfo->PhysicalDeviceState - == DAC960_V2_Device_InvalidState) && - NewPhysicalDeviceInfo->PhysicalDeviceState - != DAC960_V2_Device_Dead) - Controller->V2.NeedDeviceSerialNumberInformation = true; - memcpy(PhysicalDeviceInfo, NewPhysicalDeviceInfo, - sizeof(DAC960_V2_PhysicalDeviceInfo_T)); - } - NewPhysicalDeviceInfo->LogicalUnit++; - Controller->V2.PhysicalDeviceIndex++; - } - else if (IOCTLOpcode == DAC960_V2_GetPhysicalDeviceInfoValid) - { - unsigned int DeviceIndex; - for (DeviceIndex = Controller->V2.PhysicalDeviceIndex; - DeviceIndex < DAC960_V2_MaxPhysicalDevices; - DeviceIndex++) - { - DAC960_V2_PhysicalDeviceInfo_T *PhysicalDeviceInfo = - Controller->V2.PhysicalDeviceInformation[DeviceIndex]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - Controller->V2.InquiryUnitSerialNumber[DeviceIndex]; - if (PhysicalDeviceInfo == NULL) break; - DAC960_Critical("Physical Device %d:%d No Longer Exists\n", - Controller, - PhysicalDeviceInfo->Channel, - PhysicalDeviceInfo->TargetID); - Controller->V2.PhysicalDeviceInformation[DeviceIndex] = NULL; - Controller->V2.InquiryUnitSerialNumber[DeviceIndex] = NULL; - kfree(PhysicalDeviceInfo); - kfree(InquiryUnitSerialNumber); - } - Controller->V2.NeedPhysicalDeviceInformation = false; - } - else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid && - CommandStatus == DAC960_V2_NormalCompletion) - { - DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInfo = - Controller->V2.NewLogicalDeviceInformation; - unsigned short LogicalDeviceNumber = - NewLogicalDeviceInfo->LogicalDeviceNumber; - DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = - Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber]; - if (LogicalDeviceInfo == NULL) - { - DAC960_V2_PhysicalDevice_T PhysicalDevice; - PhysicalDevice.Controller = 0; - PhysicalDevice.Channel = NewLogicalDeviceInfo->Channel; - PhysicalDevice.TargetID = NewLogicalDeviceInfo->TargetID; - PhysicalDevice.LogicalUnit = NewLogicalDeviceInfo->LogicalUnit; - Controller->V2.LogicalDriveToVirtualDevice[LogicalDeviceNumber] = - PhysicalDevice; - LogicalDeviceInfo = kmalloc(sizeof(DAC960_V2_LogicalDeviceInfo_T), - GFP_ATOMIC); - Controller->V2.LogicalDeviceInformation[LogicalDeviceNumber] = - LogicalDeviceInfo; - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "Now Exists%s\n", Controller, - LogicalDeviceNumber, - Controller->ControllerNumber, - LogicalDeviceNumber, - (LogicalDeviceInfo != NULL - ? "" : " - Allocation Failed")); - if (LogicalDeviceInfo != NULL) - { - memset(LogicalDeviceInfo, 0, - sizeof(DAC960_V2_LogicalDeviceInfo_T)); - DAC960_ComputeGenericDiskInfo(Controller); - } - } - if (LogicalDeviceInfo != NULL) - { - unsigned long LogicalDeviceSize = - NewLogicalDeviceInfo->ConfigurableDeviceSize; - if (NewLogicalDeviceInfo->LogicalDeviceState != - LogicalDeviceInfo->LogicalDeviceState) - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "is now %s\n", Controller, - LogicalDeviceNumber, - Controller->ControllerNumber, - LogicalDeviceNumber, - (NewLogicalDeviceInfo->LogicalDeviceState - == DAC960_V2_LogicalDevice_Online - ? "ONLINE" - : NewLogicalDeviceInfo->LogicalDeviceState - == DAC960_V2_LogicalDevice_Critical - ? "CRITICAL" : "OFFLINE")); - if ((NewLogicalDeviceInfo->SoftErrors != - LogicalDeviceInfo->SoftErrors) || - (NewLogicalDeviceInfo->CommandsFailed != - LogicalDeviceInfo->CommandsFailed) || - (NewLogicalDeviceInfo->DeferredWriteErrors != - LogicalDeviceInfo->DeferredWriteErrors)) - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) Errors: " - "Soft = %d, Failed = %d, Deferred Write = %d\n", - Controller, LogicalDeviceNumber, - Controller->ControllerNumber, - LogicalDeviceNumber, - NewLogicalDeviceInfo->SoftErrors, - NewLogicalDeviceInfo->CommandsFailed, - NewLogicalDeviceInfo->DeferredWriteErrors); - if (NewLogicalDeviceInfo->ConsistencyCheckInProgress) - DAC960_V2_ReportProgress(Controller, - "Consistency Check", - LogicalDeviceNumber, - NewLogicalDeviceInfo - ->ConsistencyCheckBlockNumber, - LogicalDeviceSize); - else if (NewLogicalDeviceInfo->RebuildInProgress) - DAC960_V2_ReportProgress(Controller, - "Rebuild", - LogicalDeviceNumber, - NewLogicalDeviceInfo - ->RebuildBlockNumber, - LogicalDeviceSize); - else if (NewLogicalDeviceInfo->BackgroundInitializationInProgress) - DAC960_V2_ReportProgress(Controller, - "Background Initialization", - LogicalDeviceNumber, - NewLogicalDeviceInfo - ->BackgroundInitializationBlockNumber, - LogicalDeviceSize); - else if (NewLogicalDeviceInfo->ForegroundInitializationInProgress) - DAC960_V2_ReportProgress(Controller, - "Foreground Initialization", - LogicalDeviceNumber, - NewLogicalDeviceInfo - ->ForegroundInitializationBlockNumber, - LogicalDeviceSize); - else if (NewLogicalDeviceInfo->DataMigrationInProgress) - DAC960_V2_ReportProgress(Controller, - "Data Migration", - LogicalDeviceNumber, - NewLogicalDeviceInfo - ->DataMigrationBlockNumber, - LogicalDeviceSize); - else if (NewLogicalDeviceInfo->PatrolOperationInProgress) - DAC960_V2_ReportProgress(Controller, - "Patrol Operation", - LogicalDeviceNumber, - NewLogicalDeviceInfo - ->PatrolOperationBlockNumber, - LogicalDeviceSize); - if (LogicalDeviceInfo->BackgroundInitializationInProgress && - !NewLogicalDeviceInfo->BackgroundInitializationInProgress) - DAC960_Progress("Logical Drive %d (/dev/rd/c%dd%d) " - "Background Initialization %s\n", - Controller, - LogicalDeviceNumber, - Controller->ControllerNumber, - LogicalDeviceNumber, - (NewLogicalDeviceInfo->LogicalDeviceControl - .LogicalDeviceInitialized - ? "Completed" : "Failed")); - memcpy(LogicalDeviceInfo, NewLogicalDeviceInfo, - sizeof(DAC960_V2_LogicalDeviceInfo_T)); - } - Controller->V2.LogicalDriveFoundDuringScan - [LogicalDeviceNumber] = true; - NewLogicalDeviceInfo->LogicalDeviceNumber++; - } - else if (IOCTLOpcode == DAC960_V2_GetLogicalDeviceInfoValid) - { - int LogicalDriveNumber; - for (LogicalDriveNumber = 0; - LogicalDriveNumber < DAC960_MaxLogicalDrives; - LogicalDriveNumber++) - { - DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = - Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; - if (LogicalDeviceInfo == NULL || - Controller->V2.LogicalDriveFoundDuringScan - [LogicalDriveNumber]) - continue; - DAC960_Critical("Logical Drive %d (/dev/rd/c%dd%d) " - "No Longer Exists\n", Controller, - LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - Controller->V2.LogicalDeviceInformation - [LogicalDriveNumber] = NULL; - kfree(LogicalDeviceInfo); - Controller->LogicalDriveInitiallyAccessible - [LogicalDriveNumber] = false; - DAC960_ComputeGenericDiskInfo(Controller); - } - Controller->V2.NeedLogicalDeviceInformation = false; - } - else if (CommandOpcode == DAC960_V2_SCSI_10_Passthru) - { - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - Controller->V2.InquiryUnitSerialNumber[Controller->V2.PhysicalDeviceIndex - 1]; - - if (CommandStatus != DAC960_V2_NormalCompletion) { - memset(InquiryUnitSerialNumber, - 0, sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; - } else - memcpy(InquiryUnitSerialNumber, - Controller->V2.NewInquiryUnitSerialNumber, - sizeof(DAC960_SCSI_Inquiry_UnitSerialNumber_T)); - - Controller->V2.NeedDeviceSerialNumberInformation = false; - } - - if (Controller->V2.HealthStatusBuffer->NextEventSequenceNumber - - Controller->V2.NextEventSequenceNumber > 0) - { - CommandMailbox->GetEvent.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->GetEvent.DataTransferSize = sizeof(DAC960_V2_Event_T); - CommandMailbox->GetEvent.EventSequenceNumberHigh16 = - Controller->V2.NextEventSequenceNumber >> 16; - CommandMailbox->GetEvent.ControllerNumber = 0; - CommandMailbox->GetEvent.IOCTL_Opcode = - DAC960_V2_GetEvent; - CommandMailbox->GetEvent.EventSequenceNumberLow16 = - Controller->V2.NextEventSequenceNumber & 0xFFFF; - CommandMailbox->GetEvent.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.EventDMA; - CommandMailbox->GetEvent.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->GetEvent.DataTransferSize; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V2.NeedPhysicalDeviceInformation) - { - if (Controller->V2.NeedDeviceSerialNumberInformation) - { - DAC960_SCSI_Inquiry_UnitSerialNumber_T *InquiryUnitSerialNumber = - Controller->V2.NewInquiryUnitSerialNumber; - InquiryUnitSerialNumber->PeripheralDeviceType = 0x1F; - - DAC960_V2_ConstructNewUnitSerialNumber(Controller, CommandMailbox, - Controller->V2.NewPhysicalDeviceInformation->Channel, - Controller->V2.NewPhysicalDeviceInformation->TargetID, - Controller->V2.NewPhysicalDeviceInformation->LogicalUnit - 1); - - - DAC960_QueueCommand(Command); - return; - } - if (Controller->V2.StartPhysicalDeviceInformationScan) - { - Controller->V2.PhysicalDeviceIndex = 0; - Controller->V2.NewPhysicalDeviceInformation->Channel = 0; - Controller->V2.NewPhysicalDeviceInformation->TargetID = 0; - Controller->V2.NewPhysicalDeviceInformation->LogicalUnit = 0; - Controller->V2.StartPhysicalDeviceInformationScan = false; - } - CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->PhysicalDeviceInfo.DataTransferSize = - sizeof(DAC960_V2_PhysicalDeviceInfo_T); - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.LogicalUnit = - Controller->V2.NewPhysicalDeviceInformation->LogicalUnit; - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = - Controller->V2.NewPhysicalDeviceInformation->TargetID; - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = - Controller->V2.NewPhysicalDeviceInformation->Channel; - CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode = - DAC960_V2_GetPhysicalDeviceInfoValid; - CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewPhysicalDeviceInformationDMA; - CommandMailbox->PhysicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->PhysicalDeviceInfo.DataTransferSize; - DAC960_QueueCommand(Command); - return; - } - if (Controller->V2.NeedLogicalDeviceInformation) - { - if (Controller->V2.StartLogicalDeviceInformationScan) - { - int LogicalDriveNumber; - for (LogicalDriveNumber = 0; - LogicalDriveNumber < DAC960_MaxLogicalDrives; - LogicalDriveNumber++) - Controller->V2.LogicalDriveFoundDuringScan - [LogicalDriveNumber] = false; - Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber = 0; - Controller->V2.StartLogicalDeviceInformationScan = false; - } - CommandMailbox->LogicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->LogicalDeviceInfo.DataTransferSize = - sizeof(DAC960_V2_LogicalDeviceInfo_T); - CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = - Controller->V2.NewLogicalDeviceInformation->LogicalDeviceNumber; - CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = - DAC960_V2_GetLogicalDeviceInfoValid; - CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewLogicalDeviceInformationDMA; - CommandMailbox->LogicalDeviceInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->LogicalDeviceInfo.DataTransferSize; - DAC960_QueueCommand(Command); - return; - } - Controller->MonitoringTimerCount++; - Controller->MonitoringTimer.expires = - jiffies + DAC960_HealthStatusMonitoringInterval; - add_timer(&Controller->MonitoringTimer); - } - if (CommandType == DAC960_ImmediateCommand) - { - complete(Command->Completion); - Command->Completion = NULL; - return; - } - if (CommandType == DAC960_QueuedCommand) - { - DAC960_V2_KernelCommand_T *KernelCommand = Command->V2.KernelCommand; - KernelCommand->CommandStatus = CommandStatus; - KernelCommand->RequestSenseLength = Command->V2.RequestSenseLength; - KernelCommand->DataTransferLength = Command->V2.DataTransferResidue; - Command->V2.KernelCommand = NULL; - DAC960_DeallocateCommand(Command); - KernelCommand->CompletionFunction(KernelCommand); - return; - } - /* - Queue a Status Monitoring Command to the Controller using the just - completed Command if one was deferred previously due to lack of a - free Command when the Monitoring Timer Function was called. - */ - if (Controller->MonitoringCommandDeferred) - { - Controller->MonitoringCommandDeferred = false; - DAC960_V2_QueueMonitoringCommand(Command); - return; - } - /* - Deallocate the Command. - */ - DAC960_DeallocateCommand(Command); - /* - Wake up any processes waiting on a free Command. - */ - wake_up(&Controller->CommandWaitQueue); -} - -/* - DAC960_GEM_InterruptHandler handles hardware interrupts from DAC960 GEM Series - Controllers. -*/ - -static irqreturn_t DAC960_GEM_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V2_StatusMailbox_T *NextStatusMailbox; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_GEM_AcknowledgeInterrupt(ControllerBaseAddress); - NextStatusMailbox = Controller->V2.NextStatusMailbox; - while (NextStatusMailbox->Fields.CommandIdentifier > 0) - { - DAC960_V2_CommandIdentifier_T CommandIdentifier = - NextStatusMailbox->Fields.CommandIdentifier; - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus; - Command->V2.RequestSenseLength = - NextStatusMailbox->Fields.RequestSenseLength; - Command->V2.DataTransferResidue = - NextStatusMailbox->Fields.DataTransferResidue; - NextStatusMailbox->Words[0] = 0; - if (++NextStatusMailbox > Controller->V2.LastStatusMailbox) - NextStatusMailbox = Controller->V2.FirstStatusMailbox; - DAC960_V2_ProcessCompletedCommand(Command); - } - Controller->V2.NextStatusMailbox = NextStatusMailbox; - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - -/* - DAC960_BA_InterruptHandler handles hardware interrupts from DAC960 BA Series - Controllers. -*/ - -static irqreturn_t DAC960_BA_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V2_StatusMailbox_T *NextStatusMailbox; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_BA_AcknowledgeInterrupt(ControllerBaseAddress); - NextStatusMailbox = Controller->V2.NextStatusMailbox; - while (NextStatusMailbox->Fields.CommandIdentifier > 0) - { - DAC960_V2_CommandIdentifier_T CommandIdentifier = - NextStatusMailbox->Fields.CommandIdentifier; - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus; - Command->V2.RequestSenseLength = - NextStatusMailbox->Fields.RequestSenseLength; - Command->V2.DataTransferResidue = - NextStatusMailbox->Fields.DataTransferResidue; - NextStatusMailbox->Words[0] = 0; - if (++NextStatusMailbox > Controller->V2.LastStatusMailbox) - NextStatusMailbox = Controller->V2.FirstStatusMailbox; - DAC960_V2_ProcessCompletedCommand(Command); - } - Controller->V2.NextStatusMailbox = NextStatusMailbox; - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - - -/* - DAC960_LP_InterruptHandler handles hardware interrupts from DAC960 LP Series - Controllers. -*/ - -static irqreturn_t DAC960_LP_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V2_StatusMailbox_T *NextStatusMailbox; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_LP_AcknowledgeInterrupt(ControllerBaseAddress); - NextStatusMailbox = Controller->V2.NextStatusMailbox; - while (NextStatusMailbox->Fields.CommandIdentifier > 0) - { - DAC960_V2_CommandIdentifier_T CommandIdentifier = - NextStatusMailbox->Fields.CommandIdentifier; - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - Command->V2.CommandStatus = NextStatusMailbox->Fields.CommandStatus; - Command->V2.RequestSenseLength = - NextStatusMailbox->Fields.RequestSenseLength; - Command->V2.DataTransferResidue = - NextStatusMailbox->Fields.DataTransferResidue; - NextStatusMailbox->Words[0] = 0; - if (++NextStatusMailbox > Controller->V2.LastStatusMailbox) - NextStatusMailbox = Controller->V2.FirstStatusMailbox; - DAC960_V2_ProcessCompletedCommand(Command); - } - Controller->V2.NextStatusMailbox = NextStatusMailbox; - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - - -/* - DAC960_LA_InterruptHandler handles hardware interrupts from DAC960 LA Series - Controllers. -*/ - -static irqreturn_t DAC960_LA_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_StatusMailbox_T *NextStatusMailbox; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_LA_AcknowledgeInterrupt(ControllerBaseAddress); - NextStatusMailbox = Controller->V1.NextStatusMailbox; - while (NextStatusMailbox->Fields.Valid) - { - DAC960_V1_CommandIdentifier_T CommandIdentifier = - NextStatusMailbox->Fields.CommandIdentifier; - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus; - NextStatusMailbox->Word = 0; - if (++NextStatusMailbox > Controller->V1.LastStatusMailbox) - NextStatusMailbox = Controller->V1.FirstStatusMailbox; - DAC960_V1_ProcessCompletedCommand(Command); - } - Controller->V1.NextStatusMailbox = NextStatusMailbox; - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - - -/* - DAC960_PG_InterruptHandler handles hardware interrupts from DAC960 PG Series - Controllers. -*/ - -static irqreturn_t DAC960_PG_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - DAC960_V1_StatusMailbox_T *NextStatusMailbox; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_PG_AcknowledgeInterrupt(ControllerBaseAddress); - NextStatusMailbox = Controller->V1.NextStatusMailbox; - while (NextStatusMailbox->Fields.Valid) - { - DAC960_V1_CommandIdentifier_T CommandIdentifier = - NextStatusMailbox->Fields.CommandIdentifier; - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - Command->V1.CommandStatus = NextStatusMailbox->Fields.CommandStatus; - NextStatusMailbox->Word = 0; - if (++NextStatusMailbox > Controller->V1.LastStatusMailbox) - NextStatusMailbox = Controller->V1.FirstStatusMailbox; - DAC960_V1_ProcessCompletedCommand(Command); - } - Controller->V1.NextStatusMailbox = NextStatusMailbox; - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - - -/* - DAC960_PD_InterruptHandler handles hardware interrupts from DAC960 PD Series - Controllers. -*/ - -static irqreturn_t DAC960_PD_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - while (DAC960_PD_StatusAvailableP(ControllerBaseAddress)) - { - DAC960_V1_CommandIdentifier_T CommandIdentifier = - DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress); - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - Command->V1.CommandStatus = - DAC960_PD_ReadStatusRegister(ControllerBaseAddress); - DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress); - DAC960_PD_AcknowledgeStatus(ControllerBaseAddress); - DAC960_V1_ProcessCompletedCommand(Command); - } - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - - -/* - DAC960_P_InterruptHandler handles hardware interrupts from DAC960 P Series - Controllers. - - Translations of DAC960_V1_Enquiry and DAC960_V1_GetDeviceState rely - on the data having been placed into DAC960_Controller_T, rather than - an arbitrary buffer. -*/ - -static irqreturn_t DAC960_P_InterruptHandler(int IRQ_Channel, - void *DeviceIdentifier) -{ - DAC960_Controller_T *Controller = DeviceIdentifier; - void __iomem *ControllerBaseAddress = Controller->BaseAddress; - unsigned long flags; - - spin_lock_irqsave(&Controller->queue_lock, flags); - while (DAC960_PD_StatusAvailableP(ControllerBaseAddress)) - { - DAC960_V1_CommandIdentifier_T CommandIdentifier = - DAC960_PD_ReadStatusCommandIdentifier(ControllerBaseAddress); - DAC960_Command_T *Command = Controller->Commands[CommandIdentifier-1]; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_CommandOpcode_T CommandOpcode = - CommandMailbox->Common.CommandOpcode; - Command->V1.CommandStatus = - DAC960_PD_ReadStatusRegister(ControllerBaseAddress); - DAC960_PD_AcknowledgeInterrupt(ControllerBaseAddress); - DAC960_PD_AcknowledgeStatus(ControllerBaseAddress); - switch (CommandOpcode) - { - case DAC960_V1_Enquiry_Old: - Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Enquiry; - DAC960_P_To_PD_TranslateEnquiry(Controller->V1.NewEnquiry); - break; - case DAC960_V1_GetDeviceState_Old: - Command->V1.CommandMailbox.Common.CommandOpcode = - DAC960_V1_GetDeviceState; - DAC960_P_To_PD_TranslateDeviceState(Controller->V1.NewDeviceState); - break; - case DAC960_V1_Read_Old: - Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Read; - DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); - break; - case DAC960_V1_Write_Old: - Command->V1.CommandMailbox.Common.CommandOpcode = DAC960_V1_Write; - DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); - break; - case DAC960_V1_ReadWithScatterGather_Old: - Command->V1.CommandMailbox.Common.CommandOpcode = - DAC960_V1_ReadWithScatterGather; - DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); - break; - case DAC960_V1_WriteWithScatterGather_Old: - Command->V1.CommandMailbox.Common.CommandOpcode = - DAC960_V1_WriteWithScatterGather; - DAC960_P_To_PD_TranslateReadWriteCommand(CommandMailbox); - break; - default: - break; - } - DAC960_V1_ProcessCompletedCommand(Command); - } - /* - Attempt to remove additional I/O Requests from the Controller's - I/O Request Queue and queue them to the Controller. - */ - DAC960_ProcessRequest(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return IRQ_HANDLED; -} - - -/* - DAC960_V1_QueueMonitoringCommand queues a Monitoring Command to DAC960 V1 - Firmware Controllers. -*/ - -static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_MonitoringCommand; - CommandMailbox->Type3.CommandOpcode = DAC960_V1_Enquiry; - CommandMailbox->Type3.BusAddress = Controller->V1.NewEnquiryDMA; - DAC960_QueueCommand(Command); -} - - -/* - DAC960_V2_QueueMonitoringCommand queues a Monitoring Command to DAC960 V2 - Firmware Controllers. -*/ - -static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *Command) -{ - DAC960_Controller_T *Controller = Command->Controller; - DAC960_V2_CommandMailbox_T *CommandMailbox = &Command->V2.CommandMailbox; - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_MonitoringCommand; - CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->ControllerInfo.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->ControllerInfo.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->ControllerInfo.DataTransferSize = - sizeof(DAC960_V2_ControllerInfo_T); - CommandMailbox->ControllerInfo.ControllerNumber = 0; - CommandMailbox->ControllerInfo.IOCTL_Opcode = DAC960_V2_GetControllerInfo; - CommandMailbox->ControllerInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewControllerInformationDMA; - CommandMailbox->ControllerInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->ControllerInfo.DataTransferSize; - DAC960_QueueCommand(Command); -} - - -/* - DAC960_MonitoringTimerFunction is the timer function for monitoring - the status of DAC960 Controllers. -*/ - -static void DAC960_MonitoringTimerFunction(struct timer_list *t) -{ - DAC960_Controller_T *Controller = from_timer(Controller, t, MonitoringTimer); - DAC960_Command_T *Command; - unsigned long flags; - - if (Controller->FirmwareType == DAC960_V1_Controller) - { - spin_lock_irqsave(&Controller->queue_lock, flags); - /* - Queue a Status Monitoring Command to Controller. - */ - Command = DAC960_AllocateCommand(Controller); - if (Command != NULL) - DAC960_V1_QueueMonitoringCommand(Command); - else Controller->MonitoringCommandDeferred = true; - spin_unlock_irqrestore(&Controller->queue_lock, flags); - } - else - { - DAC960_V2_ControllerInfo_T *ControllerInfo = - &Controller->V2.ControllerInformation; - unsigned int StatusChangeCounter = - Controller->V2.HealthStatusBuffer->StatusChangeCounter; - bool ForceMonitoringCommand = false; - if (time_after(jiffies, Controller->SecondaryMonitoringTime - + DAC960_SecondaryMonitoringInterval)) - { - int LogicalDriveNumber; - for (LogicalDriveNumber = 0; - LogicalDriveNumber < DAC960_MaxLogicalDrives; - LogicalDriveNumber++) - { - DAC960_V2_LogicalDeviceInfo_T *LogicalDeviceInfo = - Controller->V2.LogicalDeviceInformation[LogicalDriveNumber]; - if (LogicalDeviceInfo == NULL) continue; - if (!LogicalDeviceInfo->LogicalDeviceControl - .LogicalDeviceInitialized) - { - ForceMonitoringCommand = true; - break; - } - } - Controller->SecondaryMonitoringTime = jiffies; - } - if (StatusChangeCounter == Controller->V2.StatusChangeCounter && - Controller->V2.HealthStatusBuffer->NextEventSequenceNumber - == Controller->V2.NextEventSequenceNumber && - (ControllerInfo->BackgroundInitializationsActive + - ControllerInfo->LogicalDeviceInitializationsActive + - ControllerInfo->PhysicalDeviceInitializationsActive + - ControllerInfo->ConsistencyChecksActive + - ControllerInfo->RebuildsActive + - ControllerInfo->OnlineExpansionsActive == 0 || - time_before(jiffies, Controller->PrimaryMonitoringTime - + DAC960_MonitoringTimerInterval)) && - !ForceMonitoringCommand) - { - Controller->MonitoringTimer.expires = - jiffies + DAC960_HealthStatusMonitoringInterval; - add_timer(&Controller->MonitoringTimer); - return; - } - Controller->V2.StatusChangeCounter = StatusChangeCounter; - Controller->PrimaryMonitoringTime = jiffies; - - spin_lock_irqsave(&Controller->queue_lock, flags); - /* - Queue a Status Monitoring Command to Controller. - */ - Command = DAC960_AllocateCommand(Controller); - if (Command != NULL) - DAC960_V2_QueueMonitoringCommand(Command); - else Controller->MonitoringCommandDeferred = true; - spin_unlock_irqrestore(&Controller->queue_lock, flags); - /* - Wake up any processes waiting on a Health Status Buffer change. - */ - wake_up(&Controller->HealthStatusWaitQueue); - } -} - -/* - DAC960_CheckStatusBuffer verifies that there is room to hold ByteCount - additional bytes in the Combined Status Buffer and grows the buffer if - necessary. It returns true if there is enough room and false otherwise. -*/ - -static bool DAC960_CheckStatusBuffer(DAC960_Controller_T *Controller, - unsigned int ByteCount) -{ - unsigned char *NewStatusBuffer; - if (Controller->InitialStatusLength + 1 + - Controller->CurrentStatusLength + ByteCount + 1 <= - Controller->CombinedStatusBufferLength) - return true; - if (Controller->CombinedStatusBufferLength == 0) - { - unsigned int NewStatusBufferLength = DAC960_InitialStatusBufferSize; - while (NewStatusBufferLength < ByteCount) - NewStatusBufferLength *= 2; - Controller->CombinedStatusBuffer = kmalloc(NewStatusBufferLength, - GFP_ATOMIC); - if (Controller->CombinedStatusBuffer == NULL) return false; - Controller->CombinedStatusBufferLength = NewStatusBufferLength; - return true; - } - NewStatusBuffer = kmalloc_array(2, Controller->CombinedStatusBufferLength, - GFP_ATOMIC); - if (NewStatusBuffer == NULL) - { - DAC960_Warning("Unable to expand Combined Status Buffer - Truncating\n", - Controller); - return false; - } - memcpy(NewStatusBuffer, Controller->CombinedStatusBuffer, - Controller->CombinedStatusBufferLength); - kfree(Controller->CombinedStatusBuffer); - Controller->CombinedStatusBuffer = NewStatusBuffer; - Controller->CombinedStatusBufferLength *= 2; - Controller->CurrentStatusBuffer = - &NewStatusBuffer[Controller->InitialStatusLength + 1]; - return true; -} - - -/* - DAC960_Message prints Driver Messages. -*/ - -static void DAC960_Message(DAC960_MessageLevel_T MessageLevel, - unsigned char *Format, - DAC960_Controller_T *Controller, - ...) -{ - static unsigned char Buffer[DAC960_LineBufferSize]; - static bool BeginningOfLine = true; - va_list Arguments; - int Length = 0; - va_start(Arguments, Controller); - Length = vsprintf(Buffer, Format, Arguments); - va_end(Arguments); - if (Controller == NULL) - printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], - DAC960_ControllerCount, Buffer); - else if (MessageLevel == DAC960_AnnounceLevel || - MessageLevel == DAC960_InfoLevel) - { - if (!Controller->ControllerInitialized) - { - if (DAC960_CheckStatusBuffer(Controller, Length)) - { - strcpy(&Controller->CombinedStatusBuffer - [Controller->InitialStatusLength], - Buffer); - Controller->InitialStatusLength += Length; - Controller->CurrentStatusBuffer = - &Controller->CombinedStatusBuffer - [Controller->InitialStatusLength + 1]; - } - if (MessageLevel == DAC960_AnnounceLevel) - { - static int AnnouncementLines = 0; - if (++AnnouncementLines <= 2) - printk("%sDAC960: %s", DAC960_MessageLevelMap[MessageLevel], - Buffer); - } - else - { - if (BeginningOfLine) - { - if (Buffer[0] != '\n' || Length > 1) - printk("%sDAC960#%d: %s", - DAC960_MessageLevelMap[MessageLevel], - Controller->ControllerNumber, Buffer); - } - else printk("%s", Buffer); - } - } - else if (DAC960_CheckStatusBuffer(Controller, Length)) - { - strcpy(&Controller->CurrentStatusBuffer[ - Controller->CurrentStatusLength], Buffer); - Controller->CurrentStatusLength += Length; - } - } - else if (MessageLevel == DAC960_ProgressLevel) - { - strcpy(Controller->ProgressBuffer, Buffer); - Controller->ProgressBufferLength = Length; - if (Controller->EphemeralProgressMessage) - { - if (time_after_eq(jiffies, Controller->LastProgressReportTime - + DAC960_ProgressReportingInterval)) - { - printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], - Controller->ControllerNumber, Buffer); - Controller->LastProgressReportTime = jiffies; - } - } - else printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], - Controller->ControllerNumber, Buffer); - } - else if (MessageLevel == DAC960_UserCriticalLevel) - { - strcpy(&Controller->UserStatusBuffer[Controller->UserStatusLength], - Buffer); - Controller->UserStatusLength += Length; - if (Buffer[0] != '\n' || Length > 1) - printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], - Controller->ControllerNumber, Buffer); - } - else - { - if (BeginningOfLine) - printk("%sDAC960#%d: %s", DAC960_MessageLevelMap[MessageLevel], - Controller->ControllerNumber, Buffer); - else printk("%s", Buffer); - } - BeginningOfLine = (Buffer[Length-1] == '\n'); -} - - -/* - DAC960_ParsePhysicalDevice parses spaces followed by a Physical Device - Channel:TargetID specification from a User Command string. It updates - Channel and TargetID and returns true on success and false on failure. -*/ - -static bool DAC960_ParsePhysicalDevice(DAC960_Controller_T *Controller, - char *UserCommandString, - unsigned char *Channel, - unsigned char *TargetID) -{ - char *NewUserCommandString = UserCommandString; - unsigned long XChannel, XTargetID; - while (*UserCommandString == ' ') UserCommandString++; - if (UserCommandString == NewUserCommandString) - return false; - XChannel = simple_strtoul(UserCommandString, &NewUserCommandString, 10); - if (NewUserCommandString == UserCommandString || - *NewUserCommandString != ':' || - XChannel >= Controller->Channels) - return false; - UserCommandString = ++NewUserCommandString; - XTargetID = simple_strtoul(UserCommandString, &NewUserCommandString, 10); - if (NewUserCommandString == UserCommandString || - *NewUserCommandString != '\0' || - XTargetID >= Controller->Targets) - return false; - *Channel = XChannel; - *TargetID = XTargetID; - return true; -} - - -/* - DAC960_ParseLogicalDrive parses spaces followed by a Logical Drive Number - specification from a User Command string. It updates LogicalDriveNumber and - returns true on success and false on failure. -*/ - -static bool DAC960_ParseLogicalDrive(DAC960_Controller_T *Controller, - char *UserCommandString, - unsigned char *LogicalDriveNumber) -{ - char *NewUserCommandString = UserCommandString; - unsigned long XLogicalDriveNumber; - while (*UserCommandString == ' ') UserCommandString++; - if (UserCommandString == NewUserCommandString) - return false; - XLogicalDriveNumber = - simple_strtoul(UserCommandString, &NewUserCommandString, 10); - if (NewUserCommandString == UserCommandString || - *NewUserCommandString != '\0' || - XLogicalDriveNumber > DAC960_MaxLogicalDrives - 1) - return false; - *LogicalDriveNumber = XLogicalDriveNumber; - return true; -} - - -/* - DAC960_V1_SetDeviceState sets the Device State for a Physical Device for - DAC960 V1 Firmware Controllers. -*/ - -static void DAC960_V1_SetDeviceState(DAC960_Controller_T *Controller, - DAC960_Command_T *Command, - unsigned char Channel, - unsigned char TargetID, - DAC960_V1_PhysicalDeviceState_T - DeviceState, - const unsigned char *DeviceStateString) -{ - DAC960_V1_CommandMailbox_T *CommandMailbox = &Command->V1.CommandMailbox; - CommandMailbox->Type3D.CommandOpcode = DAC960_V1_StartDevice; - CommandMailbox->Type3D.Channel = Channel; - CommandMailbox->Type3D.TargetID = TargetID; - CommandMailbox->Type3D.DeviceState = DeviceState; - CommandMailbox->Type3D.Modifier = 0; - DAC960_ExecuteCommand(Command); - switch (Command->V1.CommandStatus) - { - case DAC960_V1_NormalCompletion: - DAC960_UserCritical("%s of Physical Device %d:%d Succeeded\n", Controller, - DeviceStateString, Channel, TargetID); - break; - case DAC960_V1_UnableToStartDevice: - DAC960_UserCritical("%s of Physical Device %d:%d Failed - " - "Unable to Start Device\n", Controller, - DeviceStateString, Channel, TargetID); - break; - case DAC960_V1_NoDeviceAtAddress: - DAC960_UserCritical("%s of Physical Device %d:%d Failed - " - "No Device at Address\n", Controller, - DeviceStateString, Channel, TargetID); - break; - case DAC960_V1_InvalidChannelOrTargetOrModifier: - DAC960_UserCritical("%s of Physical Device %d:%d Failed - " - "Invalid Channel or Target or Modifier\n", - Controller, DeviceStateString, Channel, TargetID); - break; - case DAC960_V1_ChannelBusy: - DAC960_UserCritical("%s of Physical Device %d:%d Failed - " - "Channel Busy\n", Controller, - DeviceStateString, Channel, TargetID); - break; - default: - DAC960_UserCritical("%s of Physical Device %d:%d Failed - " - "Unexpected Status %04X\n", Controller, - DeviceStateString, Channel, TargetID, - Command->V1.CommandStatus); - break; - } -} - - -/* - DAC960_V1_ExecuteUserCommand executes a User Command for DAC960 V1 Firmware - Controllers. -*/ - -static bool DAC960_V1_ExecuteUserCommand(DAC960_Controller_T *Controller, - unsigned char *UserCommand) -{ - DAC960_Command_T *Command; - DAC960_V1_CommandMailbox_T *CommandMailbox; - unsigned long flags; - unsigned char Channel, TargetID, LogicalDriveNumber; - - spin_lock_irqsave(&Controller->queue_lock, flags); - while ((Command = DAC960_AllocateCommand(Controller)) == NULL) - DAC960_WaitForCommand(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - Controller->UserStatusLength = 0; - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox = &Command->V1.CommandMailbox; - if (strcmp(UserCommand, "flush-cache") == 0) - { - CommandMailbox->Type3.CommandOpcode = DAC960_V1_Flush; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Cache Flush Completed\n", Controller); - } - else if (strncmp(UserCommand, "kill", 4) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[4], - &Channel, &TargetID)) - { - DAC960_V1_DeviceState_T *DeviceState = - &Controller->V1.DeviceState[Channel][TargetID]; - if (DeviceState->Present && - DeviceState->DeviceType == DAC960_V1_DiskType && - DeviceState->DeviceState != DAC960_V1_Device_Dead) - DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID, - DAC960_V1_Device_Dead, "Kill"); - else DAC960_UserCritical("Kill of Physical Device %d:%d Illegal\n", - Controller, Channel, TargetID); - } - else if (strncmp(UserCommand, "make-online", 11) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[11], - &Channel, &TargetID)) - { - DAC960_V1_DeviceState_T *DeviceState = - &Controller->V1.DeviceState[Channel][TargetID]; - if (DeviceState->Present && - DeviceState->DeviceType == DAC960_V1_DiskType && - DeviceState->DeviceState == DAC960_V1_Device_Dead) - DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID, - DAC960_V1_Device_Online, "Make Online"); - else DAC960_UserCritical("Make Online of Physical Device %d:%d Illegal\n", - Controller, Channel, TargetID); - - } - else if (strncmp(UserCommand, "make-standby", 12) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[12], - &Channel, &TargetID)) - { - DAC960_V1_DeviceState_T *DeviceState = - &Controller->V1.DeviceState[Channel][TargetID]; - if (DeviceState->Present && - DeviceState->DeviceType == DAC960_V1_DiskType && - DeviceState->DeviceState == DAC960_V1_Device_Dead) - DAC960_V1_SetDeviceState(Controller, Command, Channel, TargetID, - DAC960_V1_Device_Standby, "Make Standby"); - else DAC960_UserCritical("Make Standby of Physical " - "Device %d:%d Illegal\n", - Controller, Channel, TargetID); - } - else if (strncmp(UserCommand, "rebuild", 7) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[7], - &Channel, &TargetID)) - { - CommandMailbox->Type3D.CommandOpcode = DAC960_V1_RebuildAsync; - CommandMailbox->Type3D.Channel = Channel; - CommandMailbox->Type3D.TargetID = TargetID; - DAC960_ExecuteCommand(Command); - switch (Command->V1.CommandStatus) - { - case DAC960_V1_NormalCompletion: - DAC960_UserCritical("Rebuild of Physical Device %d:%d Initiated\n", - Controller, Channel, TargetID); - break; - case DAC960_V1_AttemptToRebuildOnlineDrive: - DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " - "Attempt to Rebuild Online or " - "Unresponsive Drive\n", - Controller, Channel, TargetID); - break; - case DAC960_V1_NewDiskFailedDuringRebuild: - DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " - "New Disk Failed During Rebuild\n", - Controller, Channel, TargetID); - break; - case DAC960_V1_InvalidDeviceAddress: - DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " - "Invalid Device Address\n", - Controller, Channel, TargetID); - break; - case DAC960_V1_RebuildOrCheckAlreadyInProgress: - DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " - "Rebuild or Consistency Check Already " - "in Progress\n", Controller, Channel, TargetID); - break; - default: - DAC960_UserCritical("Rebuild of Physical Device %d:%d Failed - " - "Unexpected Status %04X\n", Controller, - Channel, TargetID, Command->V1.CommandStatus); - break; - } - } - else if (strncmp(UserCommand, "check-consistency", 17) == 0 && - DAC960_ParseLogicalDrive(Controller, &UserCommand[17], - &LogicalDriveNumber)) - { - CommandMailbox->Type3C.CommandOpcode = DAC960_V1_CheckConsistencyAsync; - CommandMailbox->Type3C.LogicalDriveNumber = LogicalDriveNumber; - CommandMailbox->Type3C.AutoRestore = true; - DAC960_ExecuteCommand(Command); - switch (Command->V1.CommandStatus) - { - case DAC960_V1_NormalCompletion: - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) Initiated\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - break; - case DAC960_V1_DependentDiskIsDead: - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) Failed - " - "Dependent Physical Device is DEAD\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - break; - case DAC960_V1_InvalidOrNonredundantLogicalDrive: - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) Failed - " - "Invalid or Nonredundant Logical Drive\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - break; - case DAC960_V1_RebuildOrCheckAlreadyInProgress: - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) Failed - Rebuild or " - "Consistency Check Already in Progress\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber); - break; - default: - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) Failed - " - "Unexpected Status %04X\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, Command->V1.CommandStatus); - break; - } - } - else if (strcmp(UserCommand, "cancel-rebuild") == 0 || - strcmp(UserCommand, "cancel-consistency-check") == 0) - { - /* - the OldRebuildRateConstant is never actually used - once its value is retrieved from the controller. - */ - unsigned char *OldRebuildRateConstant; - dma_addr_t OldRebuildRateConstantDMA; - - OldRebuildRateConstant = pci_alloc_consistent( Controller->PCIDevice, - sizeof(char), &OldRebuildRateConstantDMA); - if (OldRebuildRateConstant == NULL) { - DAC960_UserCritical("Cancellation of Rebuild or " - "Consistency Check Failed - " - "Out of Memory", - Controller); - goto failure; - } - CommandMailbox->Type3R.CommandOpcode = DAC960_V1_RebuildControl; - CommandMailbox->Type3R.RebuildRateConstant = 0xFF; - CommandMailbox->Type3R.BusAddress = OldRebuildRateConstantDMA; - DAC960_ExecuteCommand(Command); - switch (Command->V1.CommandStatus) - { - case DAC960_V1_NormalCompletion: - DAC960_UserCritical("Rebuild or Consistency Check Cancelled\n", - Controller); - break; - default: - DAC960_UserCritical("Cancellation of Rebuild or " - "Consistency Check Failed - " - "Unexpected Status %04X\n", - Controller, Command->V1.CommandStatus); - break; - } -failure: - pci_free_consistent(Controller->PCIDevice, sizeof(char), - OldRebuildRateConstant, OldRebuildRateConstantDMA); - } - else DAC960_UserCritical("Illegal User Command: '%s'\n", - Controller, UserCommand); - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_DeallocateCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return true; -} - - -/* - DAC960_V2_TranslatePhysicalDevice translates a Physical Device Channel and - TargetID into a Logical Device. It returns true on success and false - on failure. -*/ - -static bool DAC960_V2_TranslatePhysicalDevice(DAC960_Command_T *Command, - unsigned char Channel, - unsigned char TargetID, - unsigned short - *LogicalDeviceNumber) -{ - DAC960_V2_CommandMailbox_T SavedCommandMailbox, *CommandMailbox; - DAC960_Controller_T *Controller = Command->Controller; - - CommandMailbox = &Command->V2.CommandMailbox; - memcpy(&SavedCommandMailbox, CommandMailbox, - sizeof(DAC960_V2_CommandMailbox_T)); - - CommandMailbox->PhysicalDeviceInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->PhysicalDeviceInfo.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->PhysicalDeviceInfo.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->PhysicalDeviceInfo.DataTransferSize = - sizeof(DAC960_V2_PhysicalToLogicalDevice_T); - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.TargetID = TargetID; - CommandMailbox->PhysicalDeviceInfo.PhysicalDevice.Channel = Channel; - CommandMailbox->PhysicalDeviceInfo.IOCTL_Opcode = - DAC960_V2_TranslatePhysicalToLogicalDevice; - CommandMailbox->Common.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.PhysicalToLogicalDeviceDMA; - CommandMailbox->Common.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->Common.DataTransferSize; - - DAC960_ExecuteCommand(Command); - *LogicalDeviceNumber = Controller->V2.PhysicalToLogicalDevice->LogicalDeviceNumber; - - memcpy(CommandMailbox, &SavedCommandMailbox, - sizeof(DAC960_V2_CommandMailbox_T)); - return (Command->V2.CommandStatus == DAC960_V2_NormalCompletion); -} - - -/* - DAC960_V2_ExecuteUserCommand executes a User Command for DAC960 V2 Firmware - Controllers. -*/ - -static bool DAC960_V2_ExecuteUserCommand(DAC960_Controller_T *Controller, - unsigned char *UserCommand) -{ - DAC960_Command_T *Command; - DAC960_V2_CommandMailbox_T *CommandMailbox; - unsigned long flags; - unsigned char Channel, TargetID, LogicalDriveNumber; - unsigned short LogicalDeviceNumber; - - spin_lock_irqsave(&Controller->queue_lock, flags); - while ((Command = DAC960_AllocateCommand(Controller)) == NULL) - DAC960_WaitForCommand(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - Controller->UserStatusLength = 0; - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox = &Command->V2.CommandMailbox; - CommandMailbox->Common.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->Common.CommandControlBits.DataTransferControllerToHost = true; - CommandMailbox->Common.CommandControlBits.NoAutoRequestSense = true; - if (strcmp(UserCommand, "flush-cache") == 0) - { - CommandMailbox->DeviceOperation.IOCTL_Opcode = DAC960_V2_PauseDevice; - CommandMailbox->DeviceOperation.OperationDevice = - DAC960_V2_RAID_Controller; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Cache Flush Completed\n", Controller); - } - else if (strncmp(UserCommand, "kill", 4) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[4], - &Channel, &TargetID) && - DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, - &LogicalDeviceNumber)) - { - CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber = - LogicalDeviceNumber; - CommandMailbox->SetDeviceState.IOCTL_Opcode = - DAC960_V2_SetDeviceState; - CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState = - DAC960_V2_Device_Dead; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Kill of Physical Device %d:%d %s\n", - Controller, Channel, TargetID, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Succeeded" : "Failed")); - } - else if (strncmp(UserCommand, "make-online", 11) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[11], - &Channel, &TargetID) && - DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, - &LogicalDeviceNumber)) - { - CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber = - LogicalDeviceNumber; - CommandMailbox->SetDeviceState.IOCTL_Opcode = - DAC960_V2_SetDeviceState; - CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState = - DAC960_V2_Device_Online; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Make Online of Physical Device %d:%d %s\n", - Controller, Channel, TargetID, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Succeeded" : "Failed")); - } - else if (strncmp(UserCommand, "make-standby", 12) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[12], - &Channel, &TargetID) && - DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, - &LogicalDeviceNumber)) - { - CommandMailbox->SetDeviceState.LogicalDevice.LogicalDeviceNumber = - LogicalDeviceNumber; - CommandMailbox->SetDeviceState.IOCTL_Opcode = - DAC960_V2_SetDeviceState; - CommandMailbox->SetDeviceState.DeviceState.PhysicalDeviceState = - DAC960_V2_Device_Standby; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Make Standby of Physical Device %d:%d %s\n", - Controller, Channel, TargetID, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Succeeded" : "Failed")); - } - else if (strncmp(UserCommand, "rebuild", 7) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[7], - &Channel, &TargetID) && - DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, - &LogicalDeviceNumber)) - { - CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = - LogicalDeviceNumber; - CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = - DAC960_V2_RebuildDeviceStart; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n", - Controller, Channel, TargetID, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Initiated" : "Not Initiated")); - } - else if (strncmp(UserCommand, "cancel-rebuild", 14) == 0 && - DAC960_ParsePhysicalDevice(Controller, &UserCommand[14], - &Channel, &TargetID) && - DAC960_V2_TranslatePhysicalDevice(Command, Channel, TargetID, - &LogicalDeviceNumber)) - { - CommandMailbox->LogicalDeviceInfo.LogicalDevice.LogicalDeviceNumber = - LogicalDeviceNumber; - CommandMailbox->LogicalDeviceInfo.IOCTL_Opcode = - DAC960_V2_RebuildDeviceStop; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Rebuild of Physical Device %d:%d %s\n", - Controller, Channel, TargetID, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Cancelled" : "Not Cancelled")); - } - else if (strncmp(UserCommand, "check-consistency", 17) == 0 && - DAC960_ParseLogicalDrive(Controller, &UserCommand[17], - &LogicalDriveNumber)) - { - CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber = - LogicalDriveNumber; - CommandMailbox->ConsistencyCheck.IOCTL_Opcode = - DAC960_V2_ConsistencyCheckStart; - CommandMailbox->ConsistencyCheck.RestoreConsistency = true; - CommandMailbox->ConsistencyCheck.InitializedAreaOnly = false; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) %s\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Initiated" : "Not Initiated")); - } - else if (strncmp(UserCommand, "cancel-consistency-check", 24) == 0 && - DAC960_ParseLogicalDrive(Controller, &UserCommand[24], - &LogicalDriveNumber)) - { - CommandMailbox->ConsistencyCheck.LogicalDevice.LogicalDeviceNumber = - LogicalDriveNumber; - CommandMailbox->ConsistencyCheck.IOCTL_Opcode = - DAC960_V2_ConsistencyCheckStop; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Consistency Check of Logical Drive %d " - "(/dev/rd/c%dd%d) %s\n", - Controller, LogicalDriveNumber, - Controller->ControllerNumber, - LogicalDriveNumber, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Cancelled" : "Not Cancelled")); - } - else if (strcmp(UserCommand, "perform-discovery") == 0) - { - CommandMailbox->Common.IOCTL_Opcode = DAC960_V2_StartDiscovery; - DAC960_ExecuteCommand(Command); - DAC960_UserCritical("Discovery %s\n", Controller, - (Command->V2.CommandStatus - == DAC960_V2_NormalCompletion - ? "Initiated" : "Not Initiated")); - if (Command->V2.CommandStatus == DAC960_V2_NormalCompletion) - { - CommandMailbox->ControllerInfo.CommandOpcode = DAC960_V2_IOCTL; - CommandMailbox->ControllerInfo.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->ControllerInfo.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->ControllerInfo.DataTransferSize = - sizeof(DAC960_V2_ControllerInfo_T); - CommandMailbox->ControllerInfo.ControllerNumber = 0; - CommandMailbox->ControllerInfo.IOCTL_Opcode = - DAC960_V2_GetControllerInfo; - /* - * How does this NOT race with the queued Monitoring - * usage of this structure? - */ - CommandMailbox->ControllerInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = - Controller->V2.NewControllerInformationDMA; - CommandMailbox->ControllerInfo.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->ControllerInfo.DataTransferSize; - while (1) { - DAC960_ExecuteCommand(Command); - if (!Controller->V2.NewControllerInformation->PhysicalScanActive) - break; - msleep(1000); - } - DAC960_UserCritical("Discovery Completed\n", Controller); - } - } - else if (strcmp(UserCommand, "suppress-enclosure-messages") == 0) - Controller->SuppressEnclosureMessages = true; - else DAC960_UserCritical("Illegal User Command: '%s'\n", - Controller, UserCommand); - - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_DeallocateCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - return true; -} - -static int __maybe_unused dac960_proc_show(struct seq_file *m, void *v) -{ - unsigned char *StatusMessage = "OK\n"; - int ControllerNumber; - for (ControllerNumber = 0; - ControllerNumber < DAC960_ControllerCount; - ControllerNumber++) - { - DAC960_Controller_T *Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) continue; - if (Controller->MonitoringAlertMode) - { - StatusMessage = "ALERT\n"; - break; - } - } - seq_puts(m, StatusMessage); - return 0; -} - -static int __maybe_unused dac960_initial_status_proc_show(struct seq_file *m, - void *v) -{ - DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private; - seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer); - return 0; -} - -static int __maybe_unused dac960_current_status_proc_show(struct seq_file *m, - void *v) -{ - DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private; - unsigned char *StatusMessage = - "No Rebuild or Consistency Check in Progress\n"; - int ProgressMessageLength = strlen(StatusMessage); - if (jiffies != Controller->LastCurrentStatusTime) - { - Controller->CurrentStatusLength = 0; - DAC960_AnnounceDriver(Controller); - DAC960_ReportControllerConfiguration(Controller); - DAC960_ReportDeviceConfiguration(Controller); - if (Controller->ProgressBufferLength > 0) - ProgressMessageLength = Controller->ProgressBufferLength; - if (DAC960_CheckStatusBuffer(Controller, 2 + ProgressMessageLength)) - { - unsigned char *CurrentStatusBuffer = Controller->CurrentStatusBuffer; - CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' '; - CurrentStatusBuffer[Controller->CurrentStatusLength++] = ' '; - if (Controller->ProgressBufferLength > 0) - strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength], - Controller->ProgressBuffer); - else - strcpy(&CurrentStatusBuffer[Controller->CurrentStatusLength], - StatusMessage); - Controller->CurrentStatusLength += ProgressMessageLength; - } - Controller->LastCurrentStatusTime = jiffies; - } - seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer); - return 0; -} - -static int dac960_user_command_proc_show(struct seq_file *m, void *v) -{ - DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private; - - seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer); - return 0; -} - -static int dac960_user_command_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, dac960_user_command_proc_show, PDE_DATA(inode)); -} - -static ssize_t dac960_user_command_proc_write(struct file *file, - const char __user *Buffer, - size_t Count, loff_t *pos) -{ - DAC960_Controller_T *Controller = PDE_DATA(file_inode(file)); - unsigned char CommandBuffer[80]; - int Length; - if (Count > sizeof(CommandBuffer)-1) return -EINVAL; - if (copy_from_user(CommandBuffer, Buffer, Count)) return -EFAULT; - CommandBuffer[Count] = '\0'; - Length = strlen(CommandBuffer); - if (Length > 0 && CommandBuffer[Length-1] == '\n') - CommandBuffer[--Length] = '\0'; - if (Controller->FirmwareType == DAC960_V1_Controller) - return (DAC960_V1_ExecuteUserCommand(Controller, CommandBuffer) - ? Count : -EBUSY); - else - return (DAC960_V2_ExecuteUserCommand(Controller, CommandBuffer) - ? Count : -EBUSY); -} - -static const struct file_operations dac960_user_command_proc_fops = { - .owner = THIS_MODULE, - .open = dac960_user_command_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = dac960_user_command_proc_write, -}; - -/* - DAC960_CreateProcEntries creates the /proc/rd/... entries for the - DAC960 Driver. -*/ - -static void DAC960_CreateProcEntries(DAC960_Controller_T *Controller) -{ - struct proc_dir_entry *ControllerProcEntry; - - if (DAC960_ProcDirectoryEntry == NULL) { - DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL); - proc_create_single("status", 0, DAC960_ProcDirectoryEntry, - dac960_proc_show); - } - - snprintf(Controller->ControllerName, sizeof(Controller->ControllerName), - "c%d", Controller->ControllerNumber); - ControllerProcEntry = proc_mkdir(Controller->ControllerName, - DAC960_ProcDirectoryEntry); - proc_create_single_data("initial_status", 0, ControllerProcEntry, - dac960_initial_status_proc_show, Controller); - proc_create_single_data("current_status", 0, ControllerProcEntry, - dac960_current_status_proc_show, Controller); - proc_create_data("user_command", 0600, ControllerProcEntry, &dac960_user_command_proc_fops, Controller); - Controller->ControllerProcEntry = ControllerProcEntry; -} - - -/* - DAC960_DestroyProcEntries destroys the /proc/rd/... entries for the - DAC960 Driver. -*/ - -static void DAC960_DestroyProcEntries(DAC960_Controller_T *Controller) -{ - if (Controller->ControllerProcEntry == NULL) - return; - remove_proc_entry("initial_status", Controller->ControllerProcEntry); - remove_proc_entry("current_status", Controller->ControllerProcEntry); - remove_proc_entry("user_command", Controller->ControllerProcEntry); - remove_proc_entry(Controller->ControllerName, DAC960_ProcDirectoryEntry); - Controller->ControllerProcEntry = NULL; -} - -#ifdef DAC960_GAM_MINOR - -static long DAC960_gam_get_controller_info(DAC960_ControllerInfo_T __user *UserSpaceControllerInfo) -{ - DAC960_ControllerInfo_T ControllerInfo; - DAC960_Controller_T *Controller; - int ControllerNumber; - long ErrorCode; - - if (UserSpaceControllerInfo == NULL) - ErrorCode = -EINVAL; - else ErrorCode = get_user(ControllerNumber, - &UserSpaceControllerInfo->ControllerNumber); - if (ErrorCode != 0) - goto out; - ErrorCode = -ENXIO; - if (ControllerNumber < 0 || - ControllerNumber > DAC960_ControllerCount - 1) { - goto out; - } - Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) - goto out; - memset(&ControllerInfo, 0, sizeof(DAC960_ControllerInfo_T)); - ControllerInfo.ControllerNumber = ControllerNumber; - ControllerInfo.FirmwareType = Controller->FirmwareType; - ControllerInfo.Channels = Controller->Channels; - ControllerInfo.Targets = Controller->Targets; - ControllerInfo.PCI_Bus = Controller->Bus; - ControllerInfo.PCI_Device = Controller->Device; - ControllerInfo.PCI_Function = Controller->Function; - ControllerInfo.IRQ_Channel = Controller->IRQ_Channel; - ControllerInfo.PCI_Address = Controller->PCI_Address; - strcpy(ControllerInfo.ModelName, Controller->ModelName); - strcpy(ControllerInfo.FirmwareVersion, Controller->FirmwareVersion); - ErrorCode = (copy_to_user(UserSpaceControllerInfo, &ControllerInfo, - sizeof(DAC960_ControllerInfo_T)) ? -EFAULT : 0); -out: - return ErrorCode; -} - -static long DAC960_gam_v1_execute_command(DAC960_V1_UserCommand_T __user *UserSpaceUserCommand) -{ - DAC960_V1_UserCommand_T UserCommand; - DAC960_Controller_T *Controller; - DAC960_Command_T *Command = NULL; - DAC960_V1_CommandOpcode_T CommandOpcode; - DAC960_V1_CommandStatus_T CommandStatus; - DAC960_V1_DCDB_T DCDB; - DAC960_V1_DCDB_T *DCDB_IOBUF = NULL; - dma_addr_t DCDB_IOBUFDMA; - unsigned long flags; - int ControllerNumber, DataTransferLength; - unsigned char *DataTransferBuffer = NULL; - dma_addr_t DataTransferBufferDMA; - long ErrorCode; - - if (UserSpaceUserCommand == NULL) { - ErrorCode = -EINVAL; - goto out; - } - if (copy_from_user(&UserCommand, UserSpaceUserCommand, - sizeof(DAC960_V1_UserCommand_T))) { - ErrorCode = -EFAULT; - goto out; - } - ControllerNumber = UserCommand.ControllerNumber; - ErrorCode = -ENXIO; - if (ControllerNumber < 0 || - ControllerNumber > DAC960_ControllerCount - 1) - goto out; - Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) - goto out; - ErrorCode = -EINVAL; - if (Controller->FirmwareType != DAC960_V1_Controller) - goto out; - CommandOpcode = UserCommand.CommandMailbox.Common.CommandOpcode; - DataTransferLength = UserCommand.DataTransferLength; - if (CommandOpcode & 0x80) - goto out; - if (CommandOpcode == DAC960_V1_DCDB) - { - if (copy_from_user(&DCDB, UserCommand.DCDB, - sizeof(DAC960_V1_DCDB_T))) { - ErrorCode = -EFAULT; - goto out; - } - if (DCDB.Channel >= DAC960_V1_MaxChannels) - goto out; - if (!((DataTransferLength == 0 && - DCDB.Direction - == DAC960_V1_DCDB_NoDataTransfer) || - (DataTransferLength > 0 && - DCDB.Direction - == DAC960_V1_DCDB_DataTransferDeviceToSystem) || - (DataTransferLength < 0 && - DCDB.Direction - == DAC960_V1_DCDB_DataTransferSystemToDevice))) - goto out; - if (((DCDB.TransferLengthHigh4 << 16) | DCDB.TransferLength) - != abs(DataTransferLength)) - goto out; - DCDB_IOBUF = pci_alloc_consistent(Controller->PCIDevice, - sizeof(DAC960_V1_DCDB_T), &DCDB_IOBUFDMA); - if (DCDB_IOBUF == NULL) { - ErrorCode = -ENOMEM; - goto out; - } - } - ErrorCode = -ENOMEM; - if (DataTransferLength > 0) - { - DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice, - DataTransferLength, - &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) - goto out; - } - else if (DataTransferLength < 0) - { - DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, - -DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) - goto out; - if (copy_from_user(DataTransferBuffer, - UserCommand.DataTransferBuffer, - -DataTransferLength)) { - ErrorCode = -EFAULT; - goto out; - } - } - if (CommandOpcode == DAC960_V1_DCDB) - { - spin_lock_irqsave(&Controller->queue_lock, flags); - while ((Command = DAC960_AllocateCommand(Controller)) == NULL) - DAC960_WaitForCommand(Controller); - while (Controller->V1.DirectCommandActive[DCDB.Channel] - [DCDB.TargetID]) - { - spin_unlock_irq(&Controller->queue_lock); - __wait_event(Controller->CommandWaitQueue, - !Controller->V1.DirectCommandActive - [DCDB.Channel][DCDB.TargetID]); - spin_lock_irq(&Controller->queue_lock); - } - Controller->V1.DirectCommandActive[DCDB.Channel] - [DCDB.TargetID] = true; - spin_unlock_irqrestore(&Controller->queue_lock, flags); - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox, - sizeof(DAC960_V1_CommandMailbox_T)); - Command->V1.CommandMailbox.Type3.BusAddress = DCDB_IOBUFDMA; - DCDB.BusAddress = DataTransferBufferDMA; - memcpy(DCDB_IOBUF, &DCDB, sizeof(DAC960_V1_DCDB_T)); - } - else - { - spin_lock_irqsave(&Controller->queue_lock, flags); - while ((Command = DAC960_AllocateCommand(Controller)) == NULL) - DAC960_WaitForCommand(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - DAC960_V1_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - memcpy(&Command->V1.CommandMailbox, &UserCommand.CommandMailbox, - sizeof(DAC960_V1_CommandMailbox_T)); - if (DataTransferBuffer != NULL) - Command->V1.CommandMailbox.Type3.BusAddress = - DataTransferBufferDMA; - } - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V1.CommandStatus; - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_DeallocateCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - if (DataTransferLength > 0) - { - if (copy_to_user(UserCommand.DataTransferBuffer, - DataTransferBuffer, DataTransferLength)) { - ErrorCode = -EFAULT; - goto Failure1; - } - } - if (CommandOpcode == DAC960_V1_DCDB) - { - /* - I don't believe Target or Channel in the DCDB_IOBUF - should be any different from the contents of DCDB. - */ - Controller->V1.DirectCommandActive[DCDB.Channel] - [DCDB.TargetID] = false; - if (copy_to_user(UserCommand.DCDB, DCDB_IOBUF, - sizeof(DAC960_V1_DCDB_T))) { - ErrorCode = -EFAULT; - goto Failure1; - } - } - ErrorCode = CommandStatus; - Failure1: - if (DataTransferBuffer != NULL) - pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength), - DataTransferBuffer, DataTransferBufferDMA); - if (DCDB_IOBUF != NULL) - pci_free_consistent(Controller->PCIDevice, sizeof(DAC960_V1_DCDB_T), - DCDB_IOBUF, DCDB_IOBUFDMA); - out: - return ErrorCode; -} - -static long DAC960_gam_v2_execute_command(DAC960_V2_UserCommand_T __user *UserSpaceUserCommand) -{ - DAC960_V2_UserCommand_T UserCommand; - DAC960_Controller_T *Controller; - DAC960_Command_T *Command = NULL; - DAC960_V2_CommandMailbox_T *CommandMailbox; - DAC960_V2_CommandStatus_T CommandStatus; - unsigned long flags; - int ControllerNumber, DataTransferLength; - int DataTransferResidue, RequestSenseLength; - unsigned char *DataTransferBuffer = NULL; - dma_addr_t DataTransferBufferDMA; - unsigned char *RequestSenseBuffer = NULL; - dma_addr_t RequestSenseBufferDMA; - long ErrorCode = -EINVAL; - - if (UserSpaceUserCommand == NULL) - goto out; - if (copy_from_user(&UserCommand, UserSpaceUserCommand, - sizeof(DAC960_V2_UserCommand_T))) { - ErrorCode = -EFAULT; - goto out; - } - ErrorCode = -ENXIO; - ControllerNumber = UserCommand.ControllerNumber; - if (ControllerNumber < 0 || - ControllerNumber > DAC960_ControllerCount - 1) - goto out; - Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) - goto out; - if (Controller->FirmwareType != DAC960_V2_Controller){ - ErrorCode = -EINVAL; - goto out; - } - DataTransferLength = UserCommand.DataTransferLength; - ErrorCode = -ENOMEM; - if (DataTransferLength > 0) - { - DataTransferBuffer = pci_zalloc_consistent(Controller->PCIDevice, - DataTransferLength, - &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) - goto out; - } - else if (DataTransferLength < 0) - { - DataTransferBuffer = pci_alloc_consistent(Controller->PCIDevice, - -DataTransferLength, &DataTransferBufferDMA); - if (DataTransferBuffer == NULL) - goto out; - if (copy_from_user(DataTransferBuffer, - UserCommand.DataTransferBuffer, - -DataTransferLength)) { - ErrorCode = -EFAULT; - goto Failure2; - } - } - RequestSenseLength = UserCommand.RequestSenseLength; - if (RequestSenseLength > 0) - { - RequestSenseBuffer = pci_zalloc_consistent(Controller->PCIDevice, - RequestSenseLength, - &RequestSenseBufferDMA); - if (RequestSenseBuffer == NULL) - { - ErrorCode = -ENOMEM; - goto Failure2; - } - } - spin_lock_irqsave(&Controller->queue_lock, flags); - while ((Command = DAC960_AllocateCommand(Controller)) == NULL) - DAC960_WaitForCommand(Controller); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - DAC960_V2_ClearCommand(Command); - Command->CommandType = DAC960_ImmediateCommand; - CommandMailbox = &Command->V2.CommandMailbox; - memcpy(CommandMailbox, &UserCommand.CommandMailbox, - sizeof(DAC960_V2_CommandMailbox_T)); - CommandMailbox->Common.CommandControlBits - .AdditionalScatterGatherListMemory = false; - CommandMailbox->Common.CommandControlBits - .NoAutoRequestSense = true; - CommandMailbox->Common.DataTransferSize = 0; - CommandMailbox->Common.DataTransferPageNumber = 0; - memset(&CommandMailbox->Common.DataTransferMemoryAddress, 0, - sizeof(DAC960_V2_DataTransferMemoryAddress_T)); - if (DataTransferLength != 0) - { - if (DataTransferLength > 0) - { - CommandMailbox->Common.CommandControlBits - .DataTransferControllerToHost = true; - CommandMailbox->Common.DataTransferSize = DataTransferLength; - } - else - { - CommandMailbox->Common.CommandControlBits - .DataTransferControllerToHost = false; - CommandMailbox->Common.DataTransferSize = -DataTransferLength; - } - CommandMailbox->Common.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentDataPointer = DataTransferBufferDMA; - CommandMailbox->Common.DataTransferMemoryAddress - .ScatterGatherSegments[0] - .SegmentByteCount = - CommandMailbox->Common.DataTransferSize; - } - if (RequestSenseLength > 0) - { - CommandMailbox->Common.CommandControlBits - .NoAutoRequestSense = false; - CommandMailbox->Common.RequestSenseSize = RequestSenseLength; - CommandMailbox->Common.RequestSenseBusAddress = - RequestSenseBufferDMA; - } - DAC960_ExecuteCommand(Command); - CommandStatus = Command->V2.CommandStatus; - RequestSenseLength = Command->V2.RequestSenseLength; - DataTransferResidue = Command->V2.DataTransferResidue; - spin_lock_irqsave(&Controller->queue_lock, flags); - DAC960_DeallocateCommand(Command); - spin_unlock_irqrestore(&Controller->queue_lock, flags); - if (RequestSenseLength > UserCommand.RequestSenseLength) - RequestSenseLength = UserCommand.RequestSenseLength; - if (copy_to_user(&UserSpaceUserCommand->DataTransferLength, - &DataTransferResidue, - sizeof(DataTransferResidue))) { - ErrorCode = -EFAULT; - goto Failure2; - } - if (copy_to_user(&UserSpaceUserCommand->RequestSenseLength, - &RequestSenseLength, sizeof(RequestSenseLength))) { - ErrorCode = -EFAULT; - goto Failure2; - } - if (DataTransferLength > 0) - { - if (copy_to_user(UserCommand.DataTransferBuffer, - DataTransferBuffer, DataTransferLength)) { - ErrorCode = -EFAULT; - goto Failure2; - } - } - if (RequestSenseLength > 0) - { - if (copy_to_user(UserCommand.RequestSenseBuffer, - RequestSenseBuffer, RequestSenseLength)) { - ErrorCode = -EFAULT; - goto Failure2; - } - } - ErrorCode = CommandStatus; - Failure2: - pci_free_consistent(Controller->PCIDevice, abs(DataTransferLength), - DataTransferBuffer, DataTransferBufferDMA); - if (RequestSenseBuffer != NULL) - pci_free_consistent(Controller->PCIDevice, RequestSenseLength, - RequestSenseBuffer, RequestSenseBufferDMA); -out: - return ErrorCode; -} - -static long DAC960_gam_v2_get_health_status(DAC960_V2_GetHealthStatus_T __user *UserSpaceGetHealthStatus) -{ - DAC960_V2_GetHealthStatus_T GetHealthStatus; - DAC960_V2_HealthStatusBuffer_T HealthStatusBuffer; - DAC960_Controller_T *Controller; - int ControllerNumber; - long ErrorCode; - - if (UserSpaceGetHealthStatus == NULL) { - ErrorCode = -EINVAL; - goto out; - } - if (copy_from_user(&GetHealthStatus, UserSpaceGetHealthStatus, - sizeof(DAC960_V2_GetHealthStatus_T))) { - ErrorCode = -EFAULT; - goto out; - } - ErrorCode = -ENXIO; - ControllerNumber = GetHealthStatus.ControllerNumber; - if (ControllerNumber < 0 || - ControllerNumber > DAC960_ControllerCount - 1) - goto out; - Controller = DAC960_Controllers[ControllerNumber]; - if (Controller == NULL) - goto out; - if (Controller->FirmwareType != DAC960_V2_Controller) { - ErrorCode = -EINVAL; - goto out; - } - if (copy_from_user(&HealthStatusBuffer, - GetHealthStatus.HealthStatusBuffer, - sizeof(DAC960_V2_HealthStatusBuffer_T))) { - ErrorCode = -EFAULT; - goto out; - } - ErrorCode = wait_event_interruptible_timeout(Controller->HealthStatusWaitQueue, - !(Controller->V2.HealthStatusBuffer->StatusChangeCounter - == HealthStatusBuffer.StatusChangeCounter && - Controller->V2.HealthStatusBuffer->NextEventSequenceNumber - == HealthStatusBuffer.NextEventSequenceNumber), - DAC960_MonitoringTimerInterval); - if (ErrorCode == -ERESTARTSYS) { - ErrorCode = -EINTR; - goto out; - } - if (copy_to_user(GetHealthStatus.HealthStatusBuffer, - Controller->V2.HealthStatusBuffer, - sizeof(DAC960_V2_HealthStatusBuffer_T))) - ErrorCode = -EFAULT; - else - ErrorCode = 0; - -out: - return ErrorCode; -} - -/* - * DAC960_gam_ioctl is the ioctl function for performing RAID operations. -*/ - -static long DAC960_gam_ioctl(struct file *file, unsigned int Request, - unsigned long Argument) -{ - long ErrorCode = 0; - void __user *argp = (void __user *)Argument; - if (!capable(CAP_SYS_ADMIN)) return -EACCES; - - mutex_lock(&DAC960_mutex); - switch (Request) - { - case DAC960_IOCTL_GET_CONTROLLER_COUNT: - ErrorCode = DAC960_ControllerCount; - break; - case DAC960_IOCTL_GET_CONTROLLER_INFO: - ErrorCode = DAC960_gam_get_controller_info(argp); - break; - case DAC960_IOCTL_V1_EXECUTE_COMMAND: - ErrorCode = DAC960_gam_v1_execute_command(argp); - break; - case DAC960_IOCTL_V2_EXECUTE_COMMAND: - ErrorCode = DAC960_gam_v2_execute_command(argp); - break; - case DAC960_IOCTL_V2_GET_HEALTH_STATUS: - ErrorCode = DAC960_gam_v2_get_health_status(argp); - break; - default: - ErrorCode = -ENOTTY; - } - mutex_unlock(&DAC960_mutex); - return ErrorCode; -} - -static const struct file_operations DAC960_gam_fops = { - .owner = THIS_MODULE, - .unlocked_ioctl = DAC960_gam_ioctl, - .llseek = noop_llseek, -}; - -static struct miscdevice DAC960_gam_dev = { - DAC960_GAM_MINOR, - "dac960_gam", - &DAC960_gam_fops -}; - -static int DAC960_gam_init(void) -{ - int ret; - - ret = misc_register(&DAC960_gam_dev); - if (ret) - printk(KERN_ERR "DAC960_gam: can't misc_register on minor %d\n", DAC960_GAM_MINOR); - return ret; -} - -static void DAC960_gam_cleanup(void) -{ - misc_deregister(&DAC960_gam_dev); -} - -#endif /* DAC960_GAM_MINOR */ - -static struct DAC960_privdata DAC960_GEM_privdata = { - .HardwareType = DAC960_GEM_Controller, - .FirmwareType = DAC960_V2_Controller, - .InterruptHandler = DAC960_GEM_InterruptHandler, - .MemoryWindowSize = DAC960_GEM_RegisterWindowSize, -}; - - -static struct DAC960_privdata DAC960_BA_privdata = { - .HardwareType = DAC960_BA_Controller, - .FirmwareType = DAC960_V2_Controller, - .InterruptHandler = DAC960_BA_InterruptHandler, - .MemoryWindowSize = DAC960_BA_RegisterWindowSize, -}; - -static struct DAC960_privdata DAC960_LP_privdata = { - .HardwareType = DAC960_LP_Controller, - .FirmwareType = DAC960_V2_Controller, - .InterruptHandler = DAC960_LP_InterruptHandler, - .MemoryWindowSize = DAC960_LP_RegisterWindowSize, -}; - -static struct DAC960_privdata DAC960_LA_privdata = { - .HardwareType = DAC960_LA_Controller, - .FirmwareType = DAC960_V1_Controller, - .InterruptHandler = DAC960_LA_InterruptHandler, - .MemoryWindowSize = DAC960_LA_RegisterWindowSize, -}; - -static struct DAC960_privdata DAC960_PG_privdata = { - .HardwareType = DAC960_PG_Controller, - .FirmwareType = DAC960_V1_Controller, - .InterruptHandler = DAC960_PG_InterruptHandler, - .MemoryWindowSize = DAC960_PG_RegisterWindowSize, -}; - -static struct DAC960_privdata DAC960_PD_privdata = { - .HardwareType = DAC960_PD_Controller, - .FirmwareType = DAC960_V1_Controller, - .InterruptHandler = DAC960_PD_InterruptHandler, - .MemoryWindowSize = DAC960_PD_RegisterWindowSize, -}; - -static struct DAC960_privdata DAC960_P_privdata = { - .HardwareType = DAC960_P_Controller, - .FirmwareType = DAC960_V1_Controller, - .InterruptHandler = DAC960_P_InterruptHandler, - .MemoryWindowSize = DAC960_PD_RegisterWindowSize, -}; - -static const struct pci_device_id DAC960_id_table[] = { - { - .vendor = PCI_VENDOR_ID_MYLEX, - .device = PCI_DEVICE_ID_MYLEX_DAC960_GEM, - .subvendor = PCI_VENDOR_ID_MYLEX, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long) &DAC960_GEM_privdata, - }, - { - .vendor = PCI_VENDOR_ID_MYLEX, - .device = PCI_DEVICE_ID_MYLEX_DAC960_BA, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long) &DAC960_BA_privdata, - }, - { - .vendor = PCI_VENDOR_ID_MYLEX, - .device = PCI_DEVICE_ID_MYLEX_DAC960_LP, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long) &DAC960_LP_privdata, - }, - { - .vendor = PCI_VENDOR_ID_DEC, - .device = PCI_DEVICE_ID_DEC_21285, - .subvendor = PCI_VENDOR_ID_MYLEX, - .subdevice = PCI_DEVICE_ID_MYLEX_DAC960_LA, - .driver_data = (unsigned long) &DAC960_LA_privdata, - }, - { - .vendor = PCI_VENDOR_ID_MYLEX, - .device = PCI_DEVICE_ID_MYLEX_DAC960_PG, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long) &DAC960_PG_privdata, - }, - { - .vendor = PCI_VENDOR_ID_MYLEX, - .device = PCI_DEVICE_ID_MYLEX_DAC960_PD, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long) &DAC960_PD_privdata, - }, - { - .vendor = PCI_VENDOR_ID_MYLEX, - .device = PCI_DEVICE_ID_MYLEX_DAC960_P, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .driver_data = (unsigned long) &DAC960_P_privdata, - }, - {0, }, -}; - -MODULE_DEVICE_TABLE(pci, DAC960_id_table); - -static struct pci_driver DAC960_pci_driver = { - .name = "DAC960", - .id_table = DAC960_id_table, - .probe = DAC960_Probe, - .remove = DAC960_Remove, -}; - -static int __init DAC960_init_module(void) -{ - int ret; - - ret = pci_register_driver(&DAC960_pci_driver); -#ifdef DAC960_GAM_MINOR - if (!ret) - DAC960_gam_init(); -#endif - return ret; -} - -static void __exit DAC960_cleanup_module(void) -{ - int i; - -#ifdef DAC960_GAM_MINOR - DAC960_gam_cleanup(); -#endif - - for (i = 0; i < DAC960_ControllerCount; i++) { - DAC960_Controller_T *Controller = DAC960_Controllers[i]; - if (Controller == NULL) - continue; - DAC960_FinalizeController(Controller); - } - if (DAC960_ProcDirectoryEntry != NULL) { - remove_proc_entry("rd/status", NULL); - remove_proc_entry("rd", NULL); - } - DAC960_ControllerCount = 0; - pci_unregister_driver(&DAC960_pci_driver); -} - -module_init(DAC960_init_module); -module_exit(DAC960_cleanup_module); - -MODULE_LICENSE("GPL"); diff --git a/drivers/block/DAC960.h b/drivers/block/DAC960.h deleted file mode 100644 index 1439e651928b..000000000000 --- a/drivers/block/DAC960.h +++ /dev/null @@ -1,4414 +0,0 @@ -/* - - Linux Driver for Mylex DAC960/AcceleRAID/eXtremeRAID PCI RAID Controllers - - Copyright 1998-2001 by Leonard N. Zubkoff - - This program is free software; you may redistribute and/or modify it under - the terms of the GNU General Public License Version 2 as published by the - Free Software Foundation. - - This program is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY - or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - for complete details. - - The author respectfully requests that any modifications to this software be - sent directly to him for evaluation and testing. - -*/ - - -/* - Define the maximum number of DAC960 Controllers supported by this driver. -*/ - -#define DAC960_MaxControllers 8 - - -/* - Define the maximum number of Controller Channels supported by DAC960 - V1 and V2 Firmware Controllers. -*/ - -#define DAC960_V1_MaxChannels 3 -#define DAC960_V2_MaxChannels 4 - - -/* - Define the maximum number of Targets per Channel supported by DAC960 - V1 and V2 Firmware Controllers. -*/ - -#define DAC960_V1_MaxTargets 16 -#define DAC960_V2_MaxTargets 128 - - -/* - Define the maximum number of Logical Drives supported by DAC960 - V1 and V2 Firmware Controllers. -*/ - -#define DAC960_MaxLogicalDrives 32 - - -/* - Define the maximum number of Physical Devices supported by DAC960 - V1 and V2 Firmware Controllers. -*/ - -#define DAC960_V1_MaxPhysicalDevices 45 -#define DAC960_V2_MaxPhysicalDevices 272 - -/* - Define a 32/64 bit I/O Address data type. -*/ - -typedef unsigned long DAC960_IO_Address_T; - - -/* - Define a 32/64 bit PCI Bus Address data type. -*/ - -typedef unsigned long DAC960_PCI_Address_T; - - -/* - Define a 32 bit Bus Address data type. -*/ - -typedef unsigned int DAC960_BusAddress32_T; - - -/* - Define a 64 bit Bus Address data type. -*/ - -typedef unsigned long long DAC960_BusAddress64_T; - - -/* - Define a 32 bit Byte Count data type. -*/ - -typedef unsigned int DAC960_ByteCount32_T; - - -/* - Define a 64 bit Byte Count data type. -*/ - -typedef unsigned long long DAC960_ByteCount64_T; - - -/* - dma_loaf is used by helper routines to divide a region of - dma mapped memory into smaller pieces, where those pieces - are not of uniform size. - */ - -struct dma_loaf { - void *cpu_base; - dma_addr_t dma_base; - size_t length; - void *cpu_free; - dma_addr_t dma_free; -}; - -/* - Define the SCSI INQUIRY Standard Data structure. -*/ - -typedef struct DAC960_SCSI_Inquiry -{ - unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */ - unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */ - unsigned char DeviceTypeModifier:7; /* Byte 1 Bits 0-6 */ - bool RMB:1; /* Byte 1 Bit 7 */ - unsigned char ANSI_ApprovedVersion:3; /* Byte 2 Bits 0-2 */ - unsigned char ECMA_Version:3; /* Byte 2 Bits 3-5 */ - unsigned char ISO_Version:2; /* Byte 2 Bits 6-7 */ - unsigned char ResponseDataFormat:4; /* Byte 3 Bits 0-3 */ - unsigned char :2; /* Byte 3 Bits 4-5 */ - bool TrmIOP:1; /* Byte 3 Bit 6 */ - bool AENC:1; /* Byte 3 Bit 7 */ - unsigned char AdditionalLength; /* Byte 4 */ - unsigned char :8; /* Byte 5 */ - unsigned char :8; /* Byte 6 */ - bool SftRe:1; /* Byte 7 Bit 0 */ - bool CmdQue:1; /* Byte 7 Bit 1 */ - bool :1; /* Byte 7 Bit 2 */ - bool Linked:1; /* Byte 7 Bit 3 */ - bool Sync:1; /* Byte 7 Bit 4 */ - bool WBus16:1; /* Byte 7 Bit 5 */ - bool WBus32:1; /* Byte 7 Bit 6 */ - bool RelAdr:1; /* Byte 7 Bit 7 */ - unsigned char VendorIdentification[8]; /* Bytes 8-15 */ - unsigned char ProductIdentification[16]; /* Bytes 16-31 */ - unsigned char ProductRevisionLevel[4]; /* Bytes 32-35 */ -} -DAC960_SCSI_Inquiry_T; - - -/* - Define the SCSI INQUIRY Unit Serial Number structure. -*/ - -typedef struct DAC960_SCSI_Inquiry_UnitSerialNumber -{ - unsigned char PeripheralDeviceType:5; /* Byte 0 Bits 0-4 */ - unsigned char PeripheralQualifier:3; /* Byte 0 Bits 5-7 */ - unsigned char PageCode; /* Byte 1 */ - unsigned char :8; /* Byte 2 */ - unsigned char PageLength; /* Byte 3 */ - unsigned char ProductSerialNumber[28]; /* Bytes 4-31 */ -} -DAC960_SCSI_Inquiry_UnitSerialNumber_T; - - -/* - Define the SCSI REQUEST SENSE Sense Key type. -*/ - -typedef enum -{ - DAC960_SenseKey_NoSense = 0x0, - DAC960_SenseKey_RecoveredError = 0x1, - DAC960_SenseKey_NotReady = 0x2, - DAC960_SenseKey_MediumError = 0x3, - DAC960_SenseKey_HardwareError = 0x4, - DAC960_SenseKey_IllegalRequest = 0x5, - DAC960_SenseKey_UnitAttention = 0x6, - DAC960_SenseKey_DataProtect = 0x7, - DAC960_SenseKey_BlankCheck = 0x8, - DAC960_SenseKey_VendorSpecific = 0x9, - DAC960_SenseKey_CopyAborted = 0xA, - DAC960_SenseKey_AbortedCommand = 0xB, - DAC960_SenseKey_Equal = 0xC, - DAC960_SenseKey_VolumeOverflow = 0xD, - DAC960_SenseKey_Miscompare = 0xE, - DAC960_SenseKey_Reserved = 0xF -} -__attribute__ ((packed)) -DAC960_SCSI_RequestSenseKey_T; - - -/* - Define the SCSI REQUEST SENSE structure. -*/ - -typedef struct DAC960_SCSI_RequestSense -{ - unsigned char ErrorCode:7; /* Byte 0 Bits 0-6 */ - bool Valid:1; /* Byte 0 Bit 7 */ - unsigned char SegmentNumber; /* Byte 1 */ - DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 2 Bits 0-3 */ - unsigned char :1; /* Byte 2 Bit 4 */ - bool ILI:1; /* Byte 2 Bit 5 */ - bool EOM:1; /* Byte 2 Bit 6 */ - bool Filemark:1; /* Byte 2 Bit 7 */ - unsigned char Information[4]; /* Bytes 3-6 */ - unsigned char AdditionalSenseLength; /* Byte 7 */ - unsigned char CommandSpecificInformation[4]; /* Bytes 8-11 */ - unsigned char AdditionalSenseCode; /* Byte 12 */ - unsigned char AdditionalSenseCodeQualifier; /* Byte 13 */ -} -DAC960_SCSI_RequestSense_T; - - -/* - Define the DAC960 V1 Firmware Command Opcodes. -*/ - -typedef enum -{ - /* I/O Commands */ - DAC960_V1_ReadExtended = 0x33, - DAC960_V1_WriteExtended = 0x34, - DAC960_V1_ReadAheadExtended = 0x35, - DAC960_V1_ReadExtendedWithScatterGather = 0xB3, - DAC960_V1_WriteExtendedWithScatterGather = 0xB4, - DAC960_V1_Read = 0x36, - DAC960_V1_ReadWithScatterGather = 0xB6, - DAC960_V1_Write = 0x37, - DAC960_V1_WriteWithScatterGather = 0xB7, - DAC960_V1_DCDB = 0x04, - DAC960_V1_DCDBWithScatterGather = 0x84, - DAC960_V1_Flush = 0x0A, - /* Controller Status Related Commands */ - DAC960_V1_Enquiry = 0x53, - DAC960_V1_Enquiry2 = 0x1C, - DAC960_V1_GetLogicalDriveElement = 0x55, - DAC960_V1_GetLogicalDriveInformation = 0x19, - DAC960_V1_IOPortRead = 0x39, - DAC960_V1_IOPortWrite = 0x3A, - DAC960_V1_GetSDStats = 0x3E, - DAC960_V1_GetPDStats = 0x3F, - DAC960_V1_PerformEventLogOperation = 0x72, - /* Device Related Commands */ - DAC960_V1_StartDevice = 0x10, - DAC960_V1_GetDeviceState = 0x50, - DAC960_V1_StopChannel = 0x13, - DAC960_V1_StartChannel = 0x12, - DAC960_V1_ResetChannel = 0x1A, - /* Commands Associated with Data Consistency and Errors */ - DAC960_V1_Rebuild = 0x09, - DAC960_V1_RebuildAsync = 0x16, - DAC960_V1_CheckConsistency = 0x0F, - DAC960_V1_CheckConsistencyAsync = 0x1E, - DAC960_V1_RebuildStat = 0x0C, - DAC960_V1_GetRebuildProgress = 0x27, - DAC960_V1_RebuildControl = 0x1F, - DAC960_V1_ReadBadBlockTable = 0x0B, - DAC960_V1_ReadBadDataTable = 0x25, - DAC960_V1_ClearBadDataTable = 0x26, - DAC960_V1_GetErrorTable = 0x17, - DAC960_V1_AddCapacityAsync = 0x2A, - DAC960_V1_BackgroundInitializationControl = 0x2B, - /* Configuration Related Commands */ - DAC960_V1_ReadConfig2 = 0x3D, - DAC960_V1_WriteConfig2 = 0x3C, - DAC960_V1_ReadConfigurationOnDisk = 0x4A, - DAC960_V1_WriteConfigurationOnDisk = 0x4B, - DAC960_V1_ReadConfiguration = 0x4E, - DAC960_V1_ReadBackupConfiguration = 0x4D, - DAC960_V1_WriteConfiguration = 0x4F, - DAC960_V1_AddConfiguration = 0x4C, - DAC960_V1_ReadConfigurationLabel = 0x48, - DAC960_V1_WriteConfigurationLabel = 0x49, - /* Firmware Upgrade Related Commands */ - DAC960_V1_LoadImage = 0x20, - DAC960_V1_StoreImage = 0x21, - DAC960_V1_ProgramImage = 0x22, - /* Diagnostic Commands */ - DAC960_V1_SetDiagnosticMode = 0x31, - DAC960_V1_RunDiagnostic = 0x32, - /* Subsystem Service Commands */ - DAC960_V1_GetSubsystemData = 0x70, - DAC960_V1_SetSubsystemParameters = 0x71, - /* Version 2.xx Firmware Commands */ - DAC960_V1_Enquiry_Old = 0x05, - DAC960_V1_GetDeviceState_Old = 0x14, - DAC960_V1_Read_Old = 0x02, - DAC960_V1_Write_Old = 0x03, - DAC960_V1_ReadWithScatterGather_Old = 0x82, - DAC960_V1_WriteWithScatterGather_Old = 0x83 -} -__attribute__ ((packed)) -DAC960_V1_CommandOpcode_T; - - -/* - Define the DAC960 V1 Firmware Command Identifier type. -*/ - -typedef unsigned char DAC960_V1_CommandIdentifier_T; - - -/* - Define the DAC960 V1 Firmware Command Status Codes. -*/ - -#define DAC960_V1_NormalCompletion 0x0000 /* Common */ -#define DAC960_V1_CheckConditionReceived 0x0002 /* Common */ -#define DAC960_V1_NoDeviceAtAddress 0x0102 /* Common */ -#define DAC960_V1_InvalidDeviceAddress 0x0105 /* Common */ -#define DAC960_V1_InvalidParameter 0x0105 /* Common */ -#define DAC960_V1_IrrecoverableDataError 0x0001 /* I/O */ -#define DAC960_V1_LogicalDriveNonexistentOrOffline 0x0002 /* I/O */ -#define DAC960_V1_AccessBeyondEndOfLogicalDrive 0x0105 /* I/O */ -#define DAC960_V1_BadDataEncountered 0x010C /* I/O */ -#define DAC960_V1_DeviceBusy 0x0008 /* DCDB */ -#define DAC960_V1_DeviceNonresponsive 0x000E /* DCDB */ -#define DAC960_V1_CommandTerminatedAbnormally 0x000F /* DCDB */ -#define DAC960_V1_UnableToStartDevice 0x0002 /* Device */ -#define DAC960_V1_InvalidChannelOrTargetOrModifier 0x0105 /* Device */ -#define DAC960_V1_ChannelBusy 0x0106 /* Device */ -#define DAC960_V1_ChannelNotStopped 0x0002 /* Device */ -#define DAC960_V1_AttemptToRebuildOnlineDrive 0x0002 /* Consistency */ -#define DAC960_V1_RebuildBadBlocksEncountered 0x0003 /* Consistency */ -#define DAC960_V1_NewDiskFailedDuringRebuild 0x0004 /* Consistency */ -#define DAC960_V1_RebuildOrCheckAlreadyInProgress 0x0106 /* Consistency */ -#define DAC960_V1_DependentDiskIsDead 0x0002 /* Consistency */ -#define DAC960_V1_InconsistentBlocksFound 0x0003 /* Consistency */ -#define DAC960_V1_InvalidOrNonredundantLogicalDrive 0x0105 /* Consistency */ -#define DAC960_V1_NoRebuildOrCheckInProgress 0x0105 /* Consistency */ -#define DAC960_V1_RebuildInProgress_DataValid 0x0000 /* Consistency */ -#define DAC960_V1_RebuildFailed_LogicalDriveFailure 0x0002 /* Consistency */ -#define DAC960_V1_RebuildFailed_BadBlocksOnOther 0x0003 /* Consistency */ -#define DAC960_V1_RebuildFailed_NewDriveFailed 0x0004 /* Consistency */ -#define DAC960_V1_RebuildSuccessful 0x0100 /* Consistency */ -#define DAC960_V1_RebuildSuccessfullyTerminated 0x0107 /* Consistency */ -#define DAC960_V1_BackgroundInitSuccessful 0x0100 /* Consistency */ -#define DAC960_V1_BackgroundInitAborted 0x0005 /* Consistency */ -#define DAC960_V1_NoBackgroundInitInProgress 0x0105 /* Consistency */ -#define DAC960_V1_AddCapacityInProgress 0x0004 /* Consistency */ -#define DAC960_V1_AddCapacityFailedOrSuspended 0x00F4 /* Consistency */ -#define DAC960_V1_Config2ChecksumError 0x0002 /* Configuration */ -#define DAC960_V1_ConfigurationSuspended 0x0106 /* Configuration */ -#define DAC960_V1_FailedToConfigureNVRAM 0x0105 /* Configuration */ -#define DAC960_V1_ConfigurationNotSavedStateChange 0x0106 /* Configuration */ -#define DAC960_V1_SubsystemNotInstalled 0x0001 /* Subsystem */ -#define DAC960_V1_SubsystemFailed 0x0002 /* Subsystem */ -#define DAC960_V1_SubsystemBusy 0x0106 /* Subsystem */ - -typedef unsigned short DAC960_V1_CommandStatus_T; - - -/* - Define the DAC960 V1 Firmware Enquiry Command reply structure. -*/ - -typedef struct DAC960_V1_Enquiry -{ - unsigned char NumberOfLogicalDrives; /* Byte 0 */ - unsigned int :24; /* Bytes 1-3 */ - unsigned int LogicalDriveSizes[32]; /* Bytes 4-131 */ - unsigned short FlashAge; /* Bytes 132-133 */ - struct { - bool DeferredWriteError:1; /* Byte 134 Bit 0 */ - bool BatteryLow:1; /* Byte 134 Bit 1 */ - unsigned char :6; /* Byte 134 Bits 2-7 */ - } StatusFlags; - unsigned char :8; /* Byte 135 */ - unsigned char MinorFirmwareVersion; /* Byte 136 */ - unsigned char MajorFirmwareVersion; /* Byte 137 */ - enum { - DAC960_V1_NoStandbyRebuildOrCheckInProgress = 0x00, - DAC960_V1_StandbyRebuildInProgress = 0x01, - DAC960_V1_BackgroundRebuildInProgress = 0x02, - DAC960_V1_BackgroundCheckInProgress = 0x03, - DAC960_V1_StandbyRebuildCompletedWithError = 0xFF, - DAC960_V1_BackgroundRebuildOrCheckFailed_DriveFailed = 0xF0, - DAC960_V1_BackgroundRebuildOrCheckFailed_LogicalDriveFailed = 0xF1, - DAC960_V1_BackgroundRebuildOrCheckFailed_OtherCauses = 0xF2, - DAC960_V1_BackgroundRebuildOrCheckSuccessfullyTerminated = 0xF3 - } __attribute__ ((packed)) RebuildFlag; /* Byte 138 */ - unsigned char MaxCommands; /* Byte 139 */ - unsigned char OfflineLogicalDriveCount; /* Byte 140 */ - unsigned char :8; /* Byte 141 */ - unsigned short EventLogSequenceNumber; /* Bytes 142-143 */ - unsigned char CriticalLogicalDriveCount; /* Byte 144 */ - unsigned int :24; /* Bytes 145-147 */ - unsigned char DeadDriveCount; /* Byte 148 */ - unsigned char :8; /* Byte 149 */ - unsigned char RebuildCount; /* Byte 150 */ - struct { - unsigned char :3; /* Byte 151 Bits 0-2 */ - bool BatteryBackupUnitPresent:1; /* Byte 151 Bit 3 */ - unsigned char :3; /* Byte 151 Bits 4-6 */ - unsigned char :1; /* Byte 151 Bit 7 */ - } MiscFlags; - struct { - unsigned char TargetID; - unsigned char Channel; - } DeadDrives[21]; /* Bytes 152-194 */ - unsigned char Reserved[62]; /* Bytes 195-255 */ -} -__attribute__ ((packed)) -DAC960_V1_Enquiry_T; - - -/* - Define the DAC960 V1 Firmware Enquiry2 Command reply structure. -*/ - -typedef struct DAC960_V1_Enquiry2 -{ - struct { - enum { - DAC960_V1_P_PD_PU = 0x01, - DAC960_V1_PL = 0x02, - DAC960_V1_PG = 0x10, - DAC960_V1_PJ = 0x11, - DAC960_V1_PR = 0x12, - DAC960_V1_PT = 0x13, - DAC960_V1_PTL0 = 0x14, - DAC960_V1_PRL = 0x15, - DAC960_V1_PTL1 = 0x16, - DAC960_V1_1164P = 0x20 - } __attribute__ ((packed)) SubModel; /* Byte 0 */ - unsigned char ActualChannels; /* Byte 1 */ - enum { - DAC960_V1_FiveChannelBoard = 0x01, - DAC960_V1_ThreeChannelBoard = 0x02, - DAC960_V1_TwoChannelBoard = 0x03, - DAC960_V1_ThreeChannelASIC_DAC = 0x04 - } __attribute__ ((packed)) Model; /* Byte 2 */ - enum { - DAC960_V1_EISA_Controller = 0x01, - DAC960_V1_MicroChannel_Controller = 0x02, - DAC960_V1_PCI_Controller = 0x03, - DAC960_V1_SCSItoSCSI_Controller = 0x08 - } __attribute__ ((packed)) ProductFamily; /* Byte 3 */ - } HardwareID; /* Bytes 0-3 */ - /* MajorVersion.MinorVersion-FirmwareType-TurnID */ - struct { - unsigned char MajorVersion; /* Byte 4 */ - unsigned char MinorVersion; /* Byte 5 */ - unsigned char TurnID; /* Byte 6 */ - char FirmwareType; /* Byte 7 */ - } FirmwareID; /* Bytes 4-7 */ - unsigned char :8; /* Byte 8 */ - unsigned int :24; /* Bytes 9-11 */ - unsigned char ConfiguredChannels; /* Byte 12 */ - unsigned char ActualChannels; /* Byte 13 */ - unsigned char MaxTargets; /* Byte 14 */ - unsigned char MaxTags; /* Byte 15 */ - unsigned char MaxLogicalDrives; /* Byte 16 */ - unsigned char MaxArms; /* Byte 17 */ - unsigned char MaxSpans; /* Byte 18 */ - unsigned char :8; /* Byte 19 */ - unsigned int :32; /* Bytes 20-23 */ - unsigned int MemorySize; /* Bytes 24-27 */ - unsigned int CacheSize; /* Bytes 28-31 */ - unsigned int FlashMemorySize; /* Bytes 32-35 */ - unsigned int NonVolatileMemorySize; /* Bytes 36-39 */ - struct { - enum { - DAC960_V1_RamType_DRAM = 0x0, - DAC960_V1_RamType_EDO = 0x1, - DAC960_V1_RamType_SDRAM = 0x2, - DAC960_V1_RamType_Last = 0x7 - } __attribute__ ((packed)) RamType:3; /* Byte 40 Bits 0-2 */ - enum { - DAC960_V1_ErrorCorrection_None = 0x0, - DAC960_V1_ErrorCorrection_Parity = 0x1, - DAC960_V1_ErrorCorrection_ECC = 0x2, - DAC960_V1_ErrorCorrection_Last = 0x7 - } __attribute__ ((packed)) ErrorCorrection:3; /* Byte 40 Bits 3-5 */ - bool FastPageMode:1; /* Byte 40 Bit 6 */ - bool LowPowerMemory:1; /* Byte 40 Bit 7 */ - unsigned char :8; /* Bytes 41 */ - } MemoryType; - unsigned short ClockSpeed; /* Bytes 42-43 */ - unsigned short MemorySpeed; /* Bytes 44-45 */ - unsigned short HardwareSpeed; /* Bytes 46-47 */ - unsigned int :32; /* Bytes 48-51 */ - unsigned int :32; /* Bytes 52-55 */ - unsigned char :8; /* Byte 56 */ - unsigned char :8; /* Byte 57 */ - unsigned short :16; /* Bytes 58-59 */ - unsigned short MaxCommands; /* Bytes 60-61 */ - unsigned short MaxScatterGatherEntries; /* Bytes 62-63 */ - unsigned short MaxDriveCommands; /* Bytes 64-65 */ - unsigned short MaxIODescriptors; /* Bytes 66-67 */ - unsigned short MaxCombinedSectors; /* Bytes 68-69 */ - unsigned char Latency; /* Byte 70 */ - unsigned char :8; /* Byte 71 */ - unsigned char SCSITimeout; /* Byte 72 */ - unsigned char :8; /* Byte 73 */ - unsigned short MinFreeLines; /* Bytes 74-75 */ - unsigned int :32; /* Bytes 76-79 */ - unsigned int :32; /* Bytes 80-83 */ - unsigned char RebuildRateConstant; /* Byte 84 */ - unsigned char :8; /* Byte 85 */ - unsigned char :8; /* Byte 86 */ - unsigned char :8; /* Byte 87 */ - unsigned int :32; /* Bytes 88-91 */ - unsigned int :32; /* Bytes 92-95 */ - unsigned short PhysicalDriveBlockSize; /* Bytes 96-97 */ - unsigned short LogicalDriveBlockSize; /* Bytes 98-99 */ - unsigned short MaxBlocksPerCommand; /* Bytes 100-101 */ - unsigned short BlockFactor; /* Bytes 102-103 */ - unsigned short CacheLineSize; /* Bytes 104-105 */ - struct { - enum { - DAC960_V1_Narrow_8bit = 0x0, - DAC960_V1_Wide_16bit = 0x1, - DAC960_V1_Wide_32bit = 0x2 - } __attribute__ ((packed)) BusWidth:2; /* Byte 106 Bits 0-1 */ - enum { - DAC960_V1_Fast = 0x0, - DAC960_V1_Ultra = 0x1, - DAC960_V1_Ultra2 = 0x2 - } __attribute__ ((packed)) BusSpeed:2; /* Byte 106 Bits 2-3 */ - bool Differential:1; /* Byte 106 Bit 4 */ - unsigned char :3; /* Byte 106 Bits 5-7 */ - } SCSICapability; - unsigned char :8; /* Byte 107 */ - unsigned int :32; /* Bytes 108-111 */ - unsigned short FirmwareBuildNumber; /* Bytes 112-113 */ - enum { - DAC960_V1_AEMI = 0x01, - DAC960_V1_OEM1 = 0x02, - DAC960_V1_OEM2 = 0x04, - DAC960_V1_OEM3 = 0x08, - DAC960_V1_Conner = 0x10, - DAC960_V1_SAFTE = 0x20 - } __attribute__ ((packed)) FaultManagementType; /* Byte 114 */ - unsigned char :8; /* Byte 115 */ - struct { - bool Clustering:1; /* Byte 116 Bit 0 */ - bool MylexOnlineRAIDExpansion:1; /* Byte 116 Bit 1 */ - bool ReadAhead:1; /* Byte 116 Bit 2 */ - bool BackgroundInitialization:1; /* Byte 116 Bit 3 */ - unsigned int :28; /* Bytes 116-119 */ - } FirmwareFeatures; - unsigned int :32; /* Bytes 120-123 */ - unsigned int :32; /* Bytes 124-127 */ -} -DAC960_V1_Enquiry2_T; - - -/* - Define the DAC960 V1 Firmware Logical Drive State type. -*/ - -typedef enum -{ - DAC960_V1_LogicalDrive_Online = 0x03, - DAC960_V1_LogicalDrive_Critical = 0x04, - DAC960_V1_LogicalDrive_Offline = 0xFF -} -__attribute__ ((packed)) -DAC960_V1_LogicalDriveState_T; - - -/* - Define the DAC960 V1 Firmware Logical Drive Information structure. -*/ - -typedef struct DAC960_V1_LogicalDriveInformation -{ - unsigned int LogicalDriveSize; /* Bytes 0-3 */ - DAC960_V1_LogicalDriveState_T LogicalDriveState; /* Byte 4 */ - unsigned char RAIDLevel:7; /* Byte 5 Bits 0-6 */ - bool WriteBack:1; /* Byte 5 Bit 7 */ - unsigned short :16; /* Bytes 6-7 */ -} -DAC960_V1_LogicalDriveInformation_T; - - -/* - Define the DAC960 V1 Firmware Get Logical Drive Information Command - reply structure. -*/ - -typedef DAC960_V1_LogicalDriveInformation_T - DAC960_V1_LogicalDriveInformationArray_T[DAC960_MaxLogicalDrives]; - - -/* - Define the DAC960 V1 Firmware Perform Event Log Operation Types. -*/ - -typedef enum -{ - DAC960_V1_GetEventLogEntry = 0x00 -} -__attribute__ ((packed)) -DAC960_V1_PerformEventLogOpType_T; - - -/* - Define the DAC960 V1 Firmware Get Event Log Entry Command reply structure. -*/ - -typedef struct DAC960_V1_EventLogEntry -{ - unsigned char MessageType; /* Byte 0 */ - unsigned char MessageLength; /* Byte 1 */ - unsigned char TargetID:5; /* Byte 2 Bits 0-4 */ - unsigned char Channel:3; /* Byte 2 Bits 5-7 */ - unsigned char LogicalUnit:6; /* Byte 3 Bits 0-5 */ - unsigned char :2; /* Byte 3 Bits 6-7 */ - unsigned short SequenceNumber; /* Bytes 4-5 */ - unsigned char ErrorCode:7; /* Byte 6 Bits 0-6 */ - bool Valid:1; /* Byte 6 Bit 7 */ - unsigned char SegmentNumber; /* Byte 7 */ - DAC960_SCSI_RequestSenseKey_T SenseKey:4; /* Byte 8 Bits 0-3 */ - unsigned char :1; /* Byte 8 Bit 4 */ - bool ILI:1; /* Byte 8 Bit 5 */ - bool EOM:1; /* Byte 8 Bit 6 */ - bool Filemark:1; /* Byte 8 Bit 7 */ - unsigned char Information[4]; /* Bytes 9-12 */ - unsigned char AdditionalSenseLength; /* Byte 13 */ - unsigned char CommandSpecificInformation[4]; /* Bytes 14-17 */ - unsigned char AdditionalSenseCode; /* Byte 18 */ - unsigned char AdditionalSenseCodeQualifier; /* Byte 19 */ - unsigned char Dummy[12]; /* Bytes 20-31 */ -} -DAC960_V1_EventLogEntry_T; - - -/* - Define the DAC960 V1 Firmware Physical Device State type. -*/ - -typedef enum -{ - DAC960_V1_Device_Dead = 0x00, - DAC960_V1_Device_WriteOnly = 0x02, - DAC960_V1_Device_Online = 0x03, - DAC960_V1_Device_Standby = 0x10 -} -__attribute__ ((packed)) -DAC960_V1_PhysicalDeviceState_T; - - -/* - Define the DAC960 V1 Firmware Get Device State Command reply structure. - The structure is padded by 2 bytes for compatibility with Version 2.xx - Firmware. -*/ - -typedef struct DAC960_V1_DeviceState -{ - bool Present:1; /* Byte 0 Bit 0 */ - unsigned char :7; /* Byte 0 Bits 1-7 */ - enum { - DAC960_V1_OtherType = 0x0, - DAC960_V1_DiskType = 0x1, - DAC960_V1_SequentialType = 0x2, - DAC960_V1_CDROM_or_WORM_Type = 0x3 - } __attribute__ ((packed)) DeviceType:2; /* Byte 1 Bits 0-1 */ - bool :1; /* Byte 1 Bit 2 */ - bool Fast20:1; /* Byte 1 Bit 3 */ - bool Sync:1; /* Byte 1 Bit 4 */ - bool Fast:1; /* Byte 1 Bit 5 */ - bool Wide:1; /* Byte 1 Bit 6 */ - bool TaggedQueuingSupported:1; /* Byte 1 Bit 7 */ - DAC960_V1_PhysicalDeviceState_T DeviceState; /* Byte 2 */ - unsigned char :8; /* Byte 3 */ - unsigned char SynchronousMultiplier; /* Byte 4 */ - unsigned char SynchronousOffset:5; /* Byte 5 Bits 0-4 */ - unsigned char :3; /* Byte 5 Bits 5-7 */ - unsigned int DiskSize __attribute__ ((packed)); /* Bytes 6-9 */ - unsigned short :16; /* Bytes 10-11 */ -} -DAC960_V1_DeviceState_T; - - -/* - Define the DAC960 V1 Firmware Get Rebuild Progress Command reply structure. -*/ - -typedef struct DAC960_V1_RebuildProgress -{ - unsigned int LogicalDriveNumber; /* Bytes 0-3 */ - unsigned int LogicalDriveSize; /* Bytes 4-7 */ - unsigned int RemainingBlocks; /* Bytes 8-11 */ -} -DAC960_V1_RebuildProgress_T; - - -/* - Define the DAC960 V1 Firmware Background Initialization Status Command - reply structure. -*/ - -typedef struct DAC960_V1_BackgroundInitializationStatus -{ - unsigned int LogicalDriveSize; /* Bytes 0-3 */ - unsigned int BlocksCompleted; /* Bytes 4-7 */ - unsigned char Reserved1[12]; /* Bytes 8-19 */ - unsigned int LogicalDriveNumber; /* Bytes 20-23 */ - unsigned char RAIDLevel; /* Byte 24 */ - enum { - DAC960_V1_BackgroundInitializationInvalid = 0x00, - DAC960_V1_BackgroundInitializationStarted = 0x02, - DAC960_V1_BackgroundInitializationInProgress = 0x04, - DAC960_V1_BackgroundInitializationSuspended = 0x05, - DAC960_V1_BackgroundInitializationCancelled = 0x06 - } __attribute__ ((packed)) Status; /* Byte 25 */ - unsigned char Reserved2[6]; /* Bytes 26-31 */ -} -DAC960_V1_BackgroundInitializationStatus_T; - - -/* - Define the DAC960 V1 Firmware Error Table Entry structure. -*/ - -typedef struct DAC960_V1_ErrorTableEntry -{ - unsigned char ParityErrorCount; /* Byte 0 */ - unsigned char SoftErrorCount; /* Byte 1 */ - unsigned char HardErrorCount; /* Byte 2 */ - unsigned char MiscErrorCount; /* Byte 3 */ -} -DAC960_V1_ErrorTableEntry_T; - - -/* - Define the DAC960 V1 Firmware Get Error Table Command reply structure. -*/ - -typedef struct DAC960_V1_ErrorTable -{ - DAC960_V1_ErrorTableEntry_T - ErrorTableEntries[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets]; -} -DAC960_V1_ErrorTable_T; - - -/* - Define the DAC960 V1 Firmware Read Config2 Command reply structure. -*/ - -typedef struct DAC960_V1_Config2 -{ - unsigned char :1; /* Byte 0 Bit 0 */ - bool ActiveNegationEnabled:1; /* Byte 0 Bit 1 */ - unsigned char :5; /* Byte 0 Bits 2-6 */ - bool NoRescanIfResetReceivedDuringScan:1; /* Byte 0 Bit 7 */ - bool StorageWorksSupportEnabled:1; /* Byte 1 Bit 0 */ - bool HewlettPackardSupportEnabled:1; /* Byte 1 Bit 1 */ - bool NoDisconnectOnFirstCommand:1; /* Byte 1 Bit 2 */ - unsigned char :2; /* Byte 1 Bits 3-4 */ - bool AEMI_ARM:1; /* Byte 1 Bit 5 */ - bool AEMI_OFM:1; /* Byte 1 Bit 6 */ - unsigned char :1; /* Byte 1 Bit 7 */ - enum { - DAC960_V1_OEMID_Mylex = 0x00, - DAC960_V1_OEMID_IBM = 0x08, - DAC960_V1_OEMID_HP = 0x0A, - DAC960_V1_OEMID_DEC = 0x0C, - DAC960_V1_OEMID_Siemens = 0x10, - DAC960_V1_OEMID_Intel = 0x12 - } __attribute__ ((packed)) OEMID; /* Byte 2 */ - unsigned char OEMModelNumber; /* Byte 3 */ - unsigned char PhysicalSector; /* Byte 4 */ - unsigned char LogicalSector; /* Byte 5 */ - unsigned char BlockFactor; /* Byte 6 */ - bool ReadAheadEnabled:1; /* Byte 7 Bit 0 */ - bool LowBIOSDelay:1; /* Byte 7 Bit 1 */ - unsigned char :2; /* Byte 7 Bits 2-3 */ - bool ReassignRestrictedToOneSector:1; /* Byte 7 Bit 4 */ - unsigned char :1; /* Byte 7 Bit 5 */ - bool ForceUnitAccessDuringWriteRecovery:1; /* Byte 7 Bit 6 */ - bool EnableLeftSymmetricRAID5Algorithm:1; /* Byte 7 Bit 7 */ - unsigned char DefaultRebuildRate; /* Byte 8 */ - unsigned char :8; /* Byte 9 */ - unsigned char BlocksPerCacheLine; /* Byte 10 */ - unsigned char BlocksPerStripe; /* Byte 11 */ - struct { - enum { - DAC960_V1_Async = 0x0, - DAC960_V1_Sync_8MHz = 0x1, - DAC960_V1_Sync_5MHz = 0x2, - DAC960_V1_Sync_10or20MHz = 0x3 /* Byte 11 Bits 0-1 */ - } __attribute__ ((packed)) Speed:2; - bool Force8Bit:1; /* Byte 11 Bit 2 */ - bool DisableFast20:1; /* Byte 11 Bit 3 */ - unsigned char :3; /* Byte 11 Bits 4-6 */ - bool EnableTaggedQueuing:1; /* Byte 11 Bit 7 */ - } __attribute__ ((packed)) ChannelParameters[6]; /* Bytes 12-17 */ - unsigned char SCSIInitiatorID; /* Byte 18 */ - unsigned char :8; /* Byte 19 */ - enum { - DAC960_V1_StartupMode_ControllerSpinUp = 0x00, - DAC960_V1_StartupMode_PowerOnSpinUp = 0x01 - } __attribute__ ((packed)) StartupMode; /* Byte 20 */ - unsigned char SimultaneousDeviceSpinUpCount; /* Byte 21 */ - unsigned char SecondsDelayBetweenSpinUps; /* Byte 22 */ - unsigned char Reserved1[29]; /* Bytes 23-51 */ - bool BIOSDisabled:1; /* Byte 52 Bit 0 */ - bool CDROMBootEnabled:1; /* Byte 52 Bit 1 */ - unsigned char :3; /* Byte 52 Bits 2-4 */ - enum { - DAC960_V1_Geometry_128_32 = 0x0, - DAC960_V1_Geometry_255_63 = 0x1, - DAC960_V1_Geometry_Reserved1 = 0x2, - DAC960_V1_Geometry_Reserved2 = 0x3 - } __attribute__ ((packed)) DriveGeometry:2; /* Byte 52 Bits 5-6 */ - unsigned char :1; /* Byte 52 Bit 7 */ - unsigned char Reserved2[9]; /* Bytes 53-61 */ - unsigned short Checksum; /* Bytes 62-63 */ -} -DAC960_V1_Config2_T; - - -/* - Define the DAC960 V1 Firmware DCDB request structure. -*/ - -typedef struct DAC960_V1_DCDB -{ - unsigned char TargetID:4; /* Byte 0 Bits 0-3 */ - unsigned char Channel:4; /* Byte 0 Bits 4-7 */ - enum { - DAC960_V1_DCDB_NoDataTransfer = 0, - DAC960_V1_DCDB_DataTransferDeviceToSystem = 1, - DAC960_V1_DCDB_DataTransferSystemToDevice = 2, - DAC960_V1_DCDB_IllegalDataTransfer = 3 - } __attribute__ ((packed)) Direction:2; /* Byte 1 Bits 0-1 */ - bool EarlyStatus:1; /* Byte 1 Bit 2 */ - unsigned char :1; /* Byte 1 Bit 3 */ - enum { - DAC960_V1_DCDB_Timeout_24_hours = 0, - DAC960_V1_DCDB_Timeout_10_seconds = 1, - DAC960_V1_DCDB_Timeout_60_seconds = 2, - DAC960_V1_DCDB_Timeout_10_minutes = 3 - } __attribute__ ((packed)) Timeout:2; /* Byte 1 Bits 4-5 */ - bool NoAutomaticRequestSense:1; /* Byte 1 Bit 6 */ - bool DisconnectPermitted:1; /* Byte 1 Bit 7 */ - unsigned short TransferLength; /* Bytes 2-3 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 4-7 */ - unsigned char CDBLength:4; /* Byte 8 Bits 0-3 */ - unsigned char TransferLengthHigh4:4; /* Byte 8 Bits 4-7 */ - unsigned char SenseLength; /* Byte 9 */ - unsigned char CDB[12]; /* Bytes 10-21 */ - unsigned char SenseData[64]; /* Bytes 22-85 */ - unsigned char Status; /* Byte 86 */ - unsigned char :8; /* Byte 87 */ -} -DAC960_V1_DCDB_T; - - -/* - Define the DAC960 V1 Firmware Scatter/Gather List Type 1 32 Bit Address - 32 Bit Byte Count structure. -*/ - -typedef struct DAC960_V1_ScatterGatherSegment -{ - DAC960_BusAddress32_T SegmentDataPointer; /* Bytes 0-3 */ - DAC960_ByteCount32_T SegmentByteCount; /* Bytes 4-7 */ -} -DAC960_V1_ScatterGatherSegment_T; - - -/* - Define the 13 Byte DAC960 V1 Firmware Command Mailbox structure. Bytes 13-15 - are not used. The Command Mailbox structure is padded to 16 bytes for - efficient access. -*/ - -typedef union DAC960_V1_CommandMailbox -{ - unsigned int Words[4]; /* Words 0-3 */ - unsigned char Bytes[16]; /* Bytes 0-15 */ - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char Dummy[14]; /* Bytes 2-15 */ - } __attribute__ ((packed)) Common; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char Dummy1[6]; /* Bytes 2-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char Dummy2[4]; /* Bytes 12-15 */ - } __attribute__ ((packed)) Type3; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char CommandOpcode2; /* Byte 2 */ - unsigned char Dummy1[5]; /* Bytes 3-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char Dummy2[4]; /* Bytes 12-15 */ - } __attribute__ ((packed)) Type3B; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char Dummy1[5]; /* Bytes 2-6 */ - unsigned char LogicalDriveNumber:6; /* Byte 7 Bits 0-6 */ - bool AutoRestore:1; /* Byte 7 Bit 7 */ - unsigned char Dummy2[8]; /* Bytes 8-15 */ - } __attribute__ ((packed)) Type3C; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char Channel; /* Byte 2 */ - unsigned char TargetID; /* Byte 3 */ - DAC960_V1_PhysicalDeviceState_T DeviceState:5; /* Byte 4 Bits 0-4 */ - unsigned char Modifier:3; /* Byte 4 Bits 5-7 */ - unsigned char Dummy1[3]; /* Bytes 5-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char Dummy2[4]; /* Bytes 12-15 */ - } __attribute__ ((packed)) Type3D; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - DAC960_V1_PerformEventLogOpType_T OperationType; /* Byte 2 */ - unsigned char OperationQualifier; /* Byte 3 */ - unsigned short SequenceNumber; /* Bytes 4-5 */ - unsigned char Dummy1[2]; /* Bytes 6-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char Dummy2[4]; /* Bytes 12-15 */ - } __attribute__ ((packed)) Type3E; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char Dummy1[2]; /* Bytes 2-3 */ - unsigned char RebuildRateConstant; /* Byte 4 */ - unsigned char Dummy2[3]; /* Bytes 5-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char Dummy3[4]; /* Bytes 12-15 */ - } __attribute__ ((packed)) Type3R; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned short TransferLength; /* Bytes 2-3 */ - unsigned int LogicalBlockAddress; /* Bytes 4-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char LogicalDriveNumber; /* Byte 12 */ - unsigned char Dummy[3]; /* Bytes 13-15 */ - } __attribute__ ((packed)) Type4; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - struct { - unsigned short TransferLength:11; /* Bytes 2-3 */ - unsigned char LogicalDriveNumber:5; /* Byte 3 Bits 3-7 */ - } __attribute__ ((packed)) LD; - unsigned int LogicalBlockAddress; /* Bytes 4-7 */ - DAC960_BusAddress32_T BusAddress; /* Bytes 8-11 */ - unsigned char ScatterGatherCount:6; /* Byte 12 Bits 0-5 */ - enum { - DAC960_V1_ScatterGather_32BitAddress_32BitByteCount = 0x0, - DAC960_V1_ScatterGather_32BitAddress_16BitByteCount = 0x1, - DAC960_V1_ScatterGather_32BitByteCount_32BitAddress = 0x2, - DAC960_V1_ScatterGather_16BitByteCount_32BitAddress = 0x3 - } __attribute__ ((packed)) ScatterGatherType:2; /* Byte 12 Bits 6-7 */ - unsigned char Dummy[3]; /* Bytes 13-15 */ - } __attribute__ ((packed)) Type5; - struct { - DAC960_V1_CommandOpcode_T CommandOpcode; /* Byte 0 */ - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 1 */ - unsigned char CommandOpcode2; /* Byte 2 */ - unsigned char :8; /* Byte 3 */ - DAC960_BusAddress32_T CommandMailboxesBusAddress; /* Bytes 4-7 */ - DAC960_BusAddress32_T StatusMailboxesBusAddress; /* Bytes 8-11 */ - unsigned char Dummy[4]; /* Bytes 12-15 */ - } __attribute__ ((packed)) TypeX; -} -DAC960_V1_CommandMailbox_T; - - -/* - Define the DAC960 V2 Firmware Command Opcodes. -*/ - -typedef enum -{ - DAC960_V2_MemCopy = 0x01, - DAC960_V2_SCSI_10_Passthru = 0x02, - DAC960_V2_SCSI_255_Passthru = 0x03, - DAC960_V2_SCSI_10 = 0x04, - DAC960_V2_SCSI_256 = 0x05, - DAC960_V2_IOCTL = 0x20 -} -__attribute__ ((packed)) -DAC960_V2_CommandOpcode_T; - - -/* - Define the DAC960 V2 Firmware IOCTL Opcodes. -*/ - -typedef enum -{ - DAC960_V2_GetControllerInfo = 0x01, - DAC960_V2_GetLogicalDeviceInfoValid = 0x03, - DAC960_V2_GetPhysicalDeviceInfoValid = 0x05, - DAC960_V2_GetHealthStatus = 0x11, - DAC960_V2_GetEvent = 0x15, - DAC960_V2_StartDiscovery = 0x81, - DAC960_V2_SetDeviceState = 0x82, - DAC960_V2_RebuildDeviceStart = 0x88, - DAC960_V2_RebuildDeviceStop = 0x89, - DAC960_V2_ConsistencyCheckStart = 0x8C, - DAC960_V2_ConsistencyCheckStop = 0x8D, - DAC960_V2_SetMemoryMailbox = 0x8E, - DAC960_V2_PauseDevice = 0x92, - DAC960_V2_TranslatePhysicalToLogicalDevice = 0xC5 -} -__attribute__ ((packed)) -DAC960_V2_IOCTL_Opcode_T; - - -/* - Define the DAC960 V2 Firmware Command Identifier type. -*/ - -typedef unsigned short DAC960_V2_CommandIdentifier_T; - - -/* - Define the DAC960 V2 Firmware Command Status Codes. -*/ - -#define DAC960_V2_NormalCompletion 0x00 -#define DAC960_V2_AbormalCompletion 0x02 -#define DAC960_V2_DeviceBusy 0x08 -#define DAC960_V2_DeviceNonresponsive 0x0E -#define DAC960_V2_DeviceNonresponsive2 0x0F -#define DAC960_V2_DeviceRevervationConflict 0x18 - -typedef unsigned char DAC960_V2_CommandStatus_T; - - -/* - Define the DAC960 V2 Firmware Memory Type structure. -*/ - -typedef struct DAC960_V2_MemoryType -{ - enum { - DAC960_V2_MemoryType_Reserved = 0x00, - DAC960_V2_MemoryType_DRAM = 0x01, - DAC960_V2_MemoryType_EDRAM = 0x02, - DAC960_V2_MemoryType_EDO = 0x03, - DAC960_V2_MemoryType_SDRAM = 0x04, - DAC960_V2_MemoryType_Last = 0x1F - } __attribute__ ((packed)) MemoryType:5; /* Byte 0 Bits 0-4 */ - bool :1; /* Byte 0 Bit 5 */ - bool MemoryParity:1; /* Byte 0 Bit 6 */ - bool MemoryECC:1; /* Byte 0 Bit 7 */ -} -DAC960_V2_MemoryType_T; - - -/* - Define the DAC960 V2 Firmware Processor Type structure. -*/ - -typedef enum -{ - DAC960_V2_ProcessorType_i960CA = 0x01, - DAC960_V2_ProcessorType_i960RD = 0x02, - DAC960_V2_ProcessorType_i960RN = 0x03, - DAC960_V2_ProcessorType_i960RP = 0x04, - DAC960_V2_ProcessorType_NorthBay = 0x05, - DAC960_V2_ProcessorType_StrongArm = 0x06, - DAC960_V2_ProcessorType_i960RM = 0x07 -} -__attribute__ ((packed)) -DAC960_V2_ProcessorType_T; - - -/* - Define the DAC960 V2 Firmware Get Controller Info reply structure. -*/ - -typedef struct DAC960_V2_ControllerInfo -{ - unsigned char :8; /* Byte 0 */ - enum { - DAC960_V2_SCSI_Bus = 0x00, - DAC960_V2_Fibre_Bus = 0x01, - DAC960_V2_PCI_Bus = 0x03 - } __attribute__ ((packed)) BusInterfaceType; /* Byte 1 */ - enum { - DAC960_V2_DAC960E = 0x01, - DAC960_V2_DAC960M = 0x08, - DAC960_V2_DAC960PD = 0x10, - DAC960_V2_DAC960PL = 0x11, - DAC960_V2_DAC960PU = 0x12, - DAC960_V2_DAC960PE = 0x13, - DAC960_V2_DAC960PG = 0x14, - DAC960_V2_DAC960PJ = 0x15, - DAC960_V2_DAC960PTL0 = 0x16, - DAC960_V2_DAC960PR = 0x17, - DAC960_V2_DAC960PRL = 0x18, - DAC960_V2_DAC960PT = 0x19, - DAC960_V2_DAC1164P = 0x1A, - DAC960_V2_DAC960PTL1 = 0x1B, - DAC960_V2_EXR2000P = 0x1C, - DAC960_V2_EXR3000P = 0x1D, - DAC960_V2_AcceleRAID352 = 0x1E, - DAC960_V2_AcceleRAID170 = 0x1F, - DAC960_V2_AcceleRAID160 = 0x20, - DAC960_V2_DAC960S = 0x60, - DAC960_V2_DAC960SU = 0x61, - DAC960_V2_DAC960SX = 0x62, - DAC960_V2_DAC960SF = 0x63, - DAC960_V2_DAC960SS = 0x64, - DAC960_V2_DAC960FL = 0x65, - DAC960_V2_DAC960LL = 0x66, - DAC960_V2_DAC960FF = 0x67, - DAC960_V2_DAC960HP = 0x68, - DAC960_V2_RAIDBRICK = 0x69, - DAC960_V2_METEOR_FL = 0x6A, - DAC960_V2_METEOR_FF = 0x6B - } __attribute__ ((packed)) ControllerType; /* Byte 2 */ - unsigned char :8; /* Byte 3 */ - unsigned short BusInterfaceSpeedMHz; /* Bytes 4-5 */ - unsigned char BusWidthBits; /* Byte 6 */ - unsigned char FlashCodeTypeOrProductID; /* Byte 7 */ - unsigned char NumberOfHostPortsPresent; /* Byte 8 */ - unsigned char Reserved1[7]; /* Bytes 9-15 */ - unsigned char BusInterfaceName[16]; /* Bytes 16-31 */ - unsigned char ControllerName[16]; /* Bytes 32-47 */ - unsigned char Reserved2[16]; /* Bytes 48-63 */ - /* Firmware Release Information */ - unsigned char FirmwareMajorVersion; /* Byte 64 */ - unsigned char FirmwareMinorVersion; /* Byte 65 */ - unsigned char FirmwareTurnNumber; /* Byte 66 */ - unsigned char FirmwareBuildNumber; /* Byte 67 */ - unsigned char FirmwareReleaseDay; /* Byte 68 */ - unsigned char FirmwareReleaseMonth; /* Byte 69 */ - unsigned char FirmwareReleaseYearHigh2Digits; /* Byte 70 */ - unsigned char FirmwareReleaseYearLow2Digits; /* Byte 71 */ - /* Hardware Release Information */ - unsigned char HardwareRevision; /* Byte 72 */ - unsigned int :24; /* Bytes 73-75 */ - unsigned char HardwareReleaseDay; /* Byte 76 */ - unsigned char HardwareReleaseMonth; /* Byte 77 */ - unsigned char HardwareReleaseYearHigh2Digits; /* Byte 78 */ - unsigned char HardwareReleaseYearLow2Digits; /* Byte 79 */ - /* Hardware Manufacturing Information */ - unsigned char ManufacturingBatchNumber; /* Byte 80 */ - unsigned char :8; /* Byte 81 */ - unsigned char ManufacturingPlantNumber; /* Byte 82 */ - unsigned char :8; /* Byte 83 */ - unsigned char HardwareManufacturingDay; /* Byte 84 */ - unsigned char HardwareManufacturingMonth; /* Byte 85 */ - unsigned char HardwareManufacturingYearHigh2Digits; /* Byte 86 */ - unsigned char HardwareManufacturingYearLow2Digits; /* Byte 87 */ - unsigned char MaximumNumberOfPDDperXLD; /* Byte 88 */ - unsigned char MaximumNumberOfILDperXLD; /* Byte 89 */ - unsigned short NonvolatileMemorySizeKB; /* Bytes 90-91 */ - unsigned char MaximumNumberOfXLD; /* Byte 92 */ - unsigned int :24; /* Bytes 93-95 */ - /* Unique Information per Controller */ - unsigned char ControllerSerialNumber[16]; /* Bytes 96-111 */ - unsigned char Reserved3[16]; /* Bytes 112-127 */ - /* Vendor Information */ - unsigned int :24; /* Bytes 128-130 */ - unsigned char OEM_Code; /* Byte 131 */ - unsigned char VendorName[16]; /* Bytes 132-147 */ - /* Other Physical/Controller/Operation Information */ - bool BBU_Present:1; /* Byte 148 Bit 0 */ - bool ActiveActiveClusteringMode:1; /* Byte 148 Bit 1 */ - unsigned char :6; /* Byte 148 Bits 2-7 */ - unsigned char :8; /* Byte 149 */ - unsigned short :16; /* Bytes 150-151 */ - /* Physical Device Scan Information */ - bool PhysicalScanActive:1; /* Byte 152 Bit 0 */ - unsigned char :7; /* Byte 152 Bits 1-7 */ - unsigned char PhysicalDeviceChannelNumber; /* Byte 153 */ - unsigned char PhysicalDeviceTargetID; /* Byte 154 */ - unsigned char PhysicalDeviceLogicalUnit; /* Byte 155 */ - /* Maximum Command Data Transfer Sizes */ - unsigned short MaximumDataTransferSizeInBlocks; /* Bytes 156-157 */ - unsigned short MaximumScatterGatherEntries; /* Bytes 158-159 */ - /* Logical/Physical Device Counts */ - unsigned short LogicalDevicesPresent; /* Bytes 160-161 */ - unsigned short LogicalDevicesCritical; /* Bytes 162-163 */ - unsigned short LogicalDevicesOffline; /* Bytes 164-165 */ - unsigned short PhysicalDevicesPresent; /* Bytes 166-167 */ - unsigned short PhysicalDisksPresent; /* Bytes 168-169 */ - unsigned short PhysicalDisksCritical; /* Bytes 170-171 */ - unsigned short PhysicalDisksOffline; /* Bytes 172-173 */ - unsigned short MaximumParallelCommands; /* Bytes 174-175 */ - /* Channel and Target ID Information */ - unsigned char NumberOfPhysicalChannelsPresent; /* Byte 176 */ - unsigned char NumberOfVirtualChannelsPresent; /* Byte 177 */ - unsigned char NumberOfPhysicalChannelsPossible; /* Byte 178 */ - unsigned char NumberOfVirtualChannelsPossible; /* Byte 179 */ - unsigned char MaximumTargetsPerChannel[16]; /* Bytes 180-195 */ - unsigned char Reserved4[12]; /* Bytes 196-207 */ - /* Memory/Cache Information */ - unsigned short MemorySizeMB; /* Bytes 208-209 */ - unsigned short CacheSizeMB; /* Bytes 210-211 */ - unsigned int ValidCacheSizeInBytes; /* Bytes 212-215 */ - unsigned int DirtyCacheSizeInBytes; /* Bytes 216-219 */ - unsigned short MemorySpeedMHz; /* Bytes 220-221 */ - unsigned char MemoryDataWidthBits; /* Byte 222 */ - DAC960_V2_MemoryType_T MemoryType; /* Byte 223 */ - unsigned char CacheMemoryTypeName[16]; /* Bytes 224-239 */ - /* Execution Memory Information */ - unsigned short ExecutionMemorySizeMB; /* Bytes 240-241 */ - unsigned short ExecutionL2CacheSizeMB; /* Bytes 242-243 */ - unsigned char Reserved5[8]; /* Bytes 244-251 */ - unsigned short ExecutionMemorySpeedMHz; /* Bytes 252-253 */ - unsigned char ExecutionMemoryDataWidthBits; /* Byte 254 */ - DAC960_V2_MemoryType_T ExecutionMemoryType; /* Byte 255 */ - unsigned char ExecutionMemoryTypeName[16]; /* Bytes 256-271 */ - /* First CPU Type Information */ - unsigned short FirstProcessorSpeedMHz; /* Bytes 272-273 */ - DAC960_V2_ProcessorType_T FirstProcessorType; /* Byte 274 */ - unsigned char FirstProcessorCount; /* Byte 275 */ - unsigned char Reserved6[12]; /* Bytes 276-287 */ - unsigned char FirstProcessorName[16]; /* Bytes 288-303 */ - /* Second CPU Type Information */ - unsigned short SecondProcessorSpeedMHz; /* Bytes 304-305 */ - DAC960_V2_ProcessorType_T SecondProcessorType; /* Byte 306 */ - unsigned char SecondProcessorCount; /* Byte 307 */ - unsigned char Reserved7[12]; /* Bytes 308-319 */ - unsigned char SecondProcessorName[16]; /* Bytes 320-335 */ - /* Debugging/Profiling/Command Time Tracing Information */ - unsigned short CurrentProfilingDataPageNumber; /* Bytes 336-337 */ - unsigned short ProgramsAwaitingProfilingData; /* Bytes 338-339 */ - unsigned short CurrentCommandTimeTraceDataPageNumber; /* Bytes 340-341 */ - unsigned short ProgramsAwaitingCommandTimeTraceData; /* Bytes 342-343 */ - unsigned char Reserved8[8]; /* Bytes 344-351 */ - /* Error Counters on Physical Devices */ - unsigned short PhysicalDeviceBusResets; /* Bytes 352-353 */ - unsigned short PhysicalDeviceParityErrors; /* Bytes 355-355 */ - unsigned short PhysicalDeviceSoftErrors; /* Bytes 356-357 */ - unsigned short PhysicalDeviceCommandsFailed; /* Bytes 358-359 */ - unsigned short PhysicalDeviceMiscellaneousErrors; /* Bytes 360-361 */ - unsigned short PhysicalDeviceCommandTimeouts; /* Bytes 362-363 */ - unsigned short PhysicalDeviceSelectionTimeouts; /* Bytes 364-365 */ - unsigned short PhysicalDeviceRetriesDone; /* Bytes 366-367 */ - unsigned short PhysicalDeviceAbortsDone; /* Bytes 368-369 */ - unsigned short PhysicalDeviceHostCommandAbortsDone; /* Bytes 370-371 */ - unsigned short PhysicalDevicePredictedFailuresDetected; /* Bytes 372-373 */ - unsigned short PhysicalDeviceHostCommandsFailed; /* Bytes 374-375 */ - unsigned short PhysicalDeviceHardErrors; /* Bytes 376-377 */ - unsigned char Reserved9[6]; /* Bytes 378-383 */ - /* Error Counters on Logical Devices */ - unsigned short LogicalDeviceSoftErrors; /* Bytes 384-385 */ - unsigned short LogicalDeviceCommandsFailed; /* Bytes 386-387 */ - unsigned short LogicalDeviceHostCommandAbortsDone; /* Bytes 388-389 */ - unsigned short :16; /* Bytes 390-391 */ - /* Error Counters on Controller */ - unsigned short ControllerMemoryErrors; /* Bytes 392-393 */ - unsigned short ControllerHostCommandAbortsDone; /* Bytes 394-395 */ - unsigned int :32; /* Bytes 396-399 */ - /* Long Duration Activity Information */ - unsigned short BackgroundInitializationsActive; /* Bytes 400-401 */ - unsigned short LogicalDeviceInitializationsActive; /* Bytes 402-403 */ - unsigned short PhysicalDeviceInitializationsActive; /* Bytes 404-405 */ - unsigned short ConsistencyChecksActive; /* Bytes 406-407 */ - unsigned short RebuildsActive; /* Bytes 408-409 */ - unsigned short OnlineExpansionsActive; /* Bytes 410-411 */ - unsigned short PatrolActivitiesActive; /* Bytes 412-413 */ - unsigned short :16; /* Bytes 414-415 */ - /* Flash ROM Information */ - unsigned char FlashType; /* Byte 416 */ - unsigned char :8; /* Byte 417 */ - unsigned short FlashSizeMB; /* Bytes 418-419 */ - unsigned int FlashLimit; /* Bytes 420-423 */ - unsigned int FlashCount; /* Bytes 424-427 */ - unsigned int :32; /* Bytes 428-431 */ - unsigned char FlashTypeName[16]; /* Bytes 432-447 */ - /* Firmware Run Time Information */ - unsigned char RebuildRate; /* Byte 448 */ - unsigned char BackgroundInitializationRate; /* Byte 449 */ - unsigned char ForegroundInitializationRate; /* Byte 450 */ - unsigned char ConsistencyCheckRate; /* Byte 451 */ - unsigned int :32; /* Bytes 452-455 */ - unsigned int MaximumDP; /* Bytes 456-459 */ - unsigned int FreeDP; /* Bytes 460-463 */ - unsigned int MaximumIOP; /* Bytes 464-467 */ - unsigned int FreeIOP; /* Bytes 468-471 */ - unsigned short MaximumCombLengthInBlocks; /* Bytes 472-473 */ - unsigned short NumberOfConfigurationGroups; /* Bytes 474-475 */ - bool InstallationAbortStatus:1; /* Byte 476 Bit 0 */ - bool MaintenanceModeStatus:1; /* Byte 476 Bit 1 */ - unsigned int :24; /* Bytes 476-479 */ - unsigned char Reserved10[32]; /* Bytes 480-511 */ - unsigned char Reserved11[512]; /* Bytes 512-1023 */ -} -DAC960_V2_ControllerInfo_T; - - -/* - Define the DAC960 V2 Firmware Logical Device State type. -*/ - -typedef enum -{ - DAC960_V2_LogicalDevice_Online = 0x01, - DAC960_V2_LogicalDevice_Offline = 0x08, - DAC960_V2_LogicalDevice_Critical = 0x09 -} -__attribute__ ((packed)) -DAC960_V2_LogicalDeviceState_T; - - -/* - Define the DAC960 V2 Firmware Get Logical Device Info reply structure. -*/ - -typedef struct DAC960_V2_LogicalDeviceInfo -{ - unsigned char :8; /* Byte 0 */ - unsigned char Channel; /* Byte 1 */ - unsigned char TargetID; /* Byte 2 */ - unsigned char LogicalUnit; /* Byte 3 */ - DAC960_V2_LogicalDeviceState_T LogicalDeviceState; /* Byte 4 */ - unsigned char RAIDLevel; /* Byte 5 */ - unsigned char StripeSize; /* Byte 6 */ - unsigned char CacheLineSize; /* Byte 7 */ - struct { - enum { - DAC960_V2_ReadCacheDisabled = 0x0, - DAC960_V2_ReadCacheEnabled = 0x1, - DAC960_V2_ReadAheadEnabled = 0x2, - DAC960_V2_IntelligentReadAheadEnabled = 0x3, - DAC960_V2_ReadCache_Last = 0x7 - } __attribute__ ((packed)) ReadCache:3; /* Byte 8 Bits 0-2 */ - enum { - DAC960_V2_WriteCacheDisabled = 0x0, - DAC960_V2_LogicalDeviceReadOnly = 0x1, - DAC960_V2_WriteCacheEnabled = 0x2, - DAC960_V2_IntelligentWriteCacheEnabled = 0x3, - DAC960_V2_WriteCache_Last = 0x7 - } __attribute__ ((packed)) WriteCache:3; /* Byte 8 Bits 3-5 */ - bool :1; /* Byte 8 Bit 6 */ - bool LogicalDeviceInitialized:1; /* Byte 8 Bit 7 */ - } LogicalDeviceControl; /* Byte 8 */ - /* Logical Device Operations Status */ - bool ConsistencyCheckInProgress:1; /* Byte 9 Bit 0 */ - bool RebuildInProgress:1; /* Byte 9 Bit 1 */ - bool BackgroundInitializationInProgress:1; /* Byte 9 Bit 2 */ - bool ForegroundInitializationInProgress:1; /* Byte 9 Bit 3 */ - bool DataMigrationInProgress:1; /* Byte 9 Bit 4 */ - bool PatrolOperationInProgress:1; /* Byte 9 Bit 5 */ - unsigned char :2; /* Byte 9 Bits 6-7 */ - unsigned char RAID5WriteUpdate; /* Byte 10 */ - unsigned char RAID5Algorithm; /* Byte 11 */ - unsigned short LogicalDeviceNumber; /* Bytes 12-13 */ - /* BIOS Info */ - bool BIOSDisabled:1; /* Byte 14 Bit 0 */ - bool CDROMBootEnabled:1; /* Byte 14 Bit 1 */ - bool DriveCoercionEnabled:1; /* Byte 14 Bit 2 */ - bool WriteSameDisabled:1; /* Byte 14 Bit 3 */ - bool HBA_ModeEnabled:1; /* Byte 14 Bit 4 */ - enum { - DAC960_V2_Geometry_128_32 = 0x0, - DAC960_V2_Geometry_255_63 = 0x1, - DAC960_V2_Geometry_Reserved1 = 0x2, - DAC960_V2_Geometry_Reserved2 = 0x3 - } __attribute__ ((packed)) DriveGeometry:2; /* Byte 14 Bits 5-6 */ - bool SuperReadAheadEnabled:1; /* Byte 14 Bit 7 */ - unsigned char :8; /* Byte 15 */ - /* Error Counters */ - unsigned short SoftErrors; /* Bytes 16-17 */ - unsigned short CommandsFailed; /* Bytes 18-19 */ - unsigned short HostCommandAbortsDone; /* Bytes 20-21 */ - unsigned short DeferredWriteErrors; /* Bytes 22-23 */ - unsigned int :32; /* Bytes 24-27 */ - unsigned int :32; /* Bytes 28-31 */ - /* Device Size Information */ - unsigned short :16; /* Bytes 32-33 */ - unsigned short DeviceBlockSizeInBytes; /* Bytes 34-35 */ - unsigned int OriginalDeviceSize; /* Bytes 36-39 */ - unsigned int ConfigurableDeviceSize; /* Bytes 40-43 */ - unsigned int :32; /* Bytes 44-47 */ - unsigned char LogicalDeviceName[32]; /* Bytes 48-79 */ - unsigned char SCSI_InquiryData[36]; /* Bytes 80-115 */ - unsigned char Reserved1[12]; /* Bytes 116-127 */ - DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 128-135 */ - DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 136-143 */ - DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 144-151 */ - DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 152-159 */ - DAC960_ByteCount64_T BackgroundInitializationBlockNumber; /* Bytes 160-167 */ - DAC960_ByteCount64_T ForegroundInitializationBlockNumber; /* Bytes 168-175 */ - DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 176-183 */ - DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 184-191 */ - unsigned char Reserved2[64]; /* Bytes 192-255 */ -} -DAC960_V2_LogicalDeviceInfo_T; - - -/* - Define the DAC960 V2 Firmware Physical Device State type. -*/ - -typedef enum -{ - DAC960_V2_Device_Unconfigured = 0x00, - DAC960_V2_Device_Online = 0x01, - DAC960_V2_Device_Rebuild = 0x03, - DAC960_V2_Device_Missing = 0x04, - DAC960_V2_Device_Critical = 0x05, - DAC960_V2_Device_Dead = 0x08, - DAC960_V2_Device_SuspectedDead = 0x0C, - DAC960_V2_Device_CommandedOffline = 0x10, - DAC960_V2_Device_Standby = 0x21, - DAC960_V2_Device_InvalidState = 0xFF -} -__attribute__ ((packed)) -DAC960_V2_PhysicalDeviceState_T; - - -/* - Define the DAC960 V2 Firmware Get Physical Device Info reply structure. -*/ - -typedef struct DAC960_V2_PhysicalDeviceInfo -{ - unsigned char :8; /* Byte 0 */ - unsigned char Channel; /* Byte 1 */ - unsigned char TargetID; /* Byte 2 */ - unsigned char LogicalUnit; /* Byte 3 */ - /* Configuration Status Bits */ - bool PhysicalDeviceFaultTolerant:1; /* Byte 4 Bit 0 */ - bool PhysicalDeviceConnected:1; /* Byte 4 Bit 1 */ - bool PhysicalDeviceLocalToController:1; /* Byte 4 Bit 2 */ - unsigned char :5; /* Byte 4 Bits 3-7 */ - /* Multiple Host/Controller Status Bits */ - bool RemoteHostSystemDead:1; /* Byte 5 Bit 0 */ - bool RemoteControllerDead:1; /* Byte 5 Bit 1 */ - unsigned char :6; /* Byte 5 Bits 2-7 */ - DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState; /* Byte 6 */ - unsigned char NegotiatedDataWidthBits; /* Byte 7 */ - unsigned short NegotiatedSynchronousMegaTransfers; /* Bytes 8-9 */ - /* Multiported Physical Device Information */ - unsigned char NumberOfPortConnections; /* Byte 10 */ - unsigned char DriveAccessibilityBitmap; /* Byte 11 */ - unsigned int :32; /* Bytes 12-15 */ - unsigned char NetworkAddress[16]; /* Bytes 16-31 */ - unsigned short MaximumTags; /* Bytes 32-33 */ - /* Physical Device Operations Status */ - bool ConsistencyCheckInProgress:1; /* Byte 34 Bit 0 */ - bool RebuildInProgress:1; /* Byte 34 Bit 1 */ - bool MakingDataConsistentInProgress:1; /* Byte 34 Bit 2 */ - bool PhysicalDeviceInitializationInProgress:1; /* Byte 34 Bit 3 */ - bool DataMigrationInProgress:1; /* Byte 34 Bit 4 */ - bool PatrolOperationInProgress:1; /* Byte 34 Bit 5 */ - unsigned char :2; /* Byte 34 Bits 6-7 */ - unsigned char LongOperationStatus; /* Byte 35 */ - unsigned char ParityErrors; /* Byte 36 */ - unsigned char SoftErrors; /* Byte 37 */ - unsigned char HardErrors; /* Byte 38 */ - unsigned char MiscellaneousErrors; /* Byte 39 */ - unsigned char CommandTimeouts; /* Byte 40 */ - unsigned char Retries; /* Byte 41 */ - unsigned char Aborts; /* Byte 42 */ - unsigned char PredictedFailuresDetected; /* Byte 43 */ - unsigned int :32; /* Bytes 44-47 */ - unsigned short :16; /* Bytes 48-49 */ - unsigned short DeviceBlockSizeInBytes; /* Bytes 50-51 */ - unsigned int OriginalDeviceSize; /* Bytes 52-55 */ - unsigned int ConfigurableDeviceSize; /* Bytes 56-59 */ - unsigned int :32; /* Bytes 60-63 */ - unsigned char PhysicalDeviceName[16]; /* Bytes 64-79 */ - unsigned char Reserved1[16]; /* Bytes 80-95 */ - unsigned char Reserved2[32]; /* Bytes 96-127 */ - unsigned char SCSI_InquiryData[36]; /* Bytes 128-163 */ - unsigned char Reserved3[20]; /* Bytes 164-183 */ - unsigned char Reserved4[8]; /* Bytes 184-191 */ - DAC960_ByteCount64_T LastReadBlockNumber; /* Bytes 192-199 */ - DAC960_ByteCount64_T LastWrittenBlockNumber; /* Bytes 200-207 */ - DAC960_ByteCount64_T ConsistencyCheckBlockNumber; /* Bytes 208-215 */ - DAC960_ByteCount64_T RebuildBlockNumber; /* Bytes 216-223 */ - DAC960_ByteCount64_T MakingDataConsistentBlockNumber; /* Bytes 224-231 */ - DAC960_ByteCount64_T DeviceInitializationBlockNumber; /* Bytes 232-239 */ - DAC960_ByteCount64_T DataMigrationBlockNumber; /* Bytes 240-247 */ - DAC960_ByteCount64_T PatrolOperationBlockNumber; /* Bytes 248-255 */ - unsigned char Reserved5[256]; /* Bytes 256-511 */ -} -DAC960_V2_PhysicalDeviceInfo_T; - - -/* - Define the DAC960 V2 Firmware Health Status Buffer structure. -*/ - -typedef struct DAC960_V2_HealthStatusBuffer -{ - unsigned int MicrosecondsFromControllerStartTime; /* Bytes 0-3 */ - unsigned int MillisecondsFromControllerStartTime; /* Bytes 4-7 */ - unsigned int SecondsFrom1January1970; /* Bytes 8-11 */ - unsigned int :32; /* Bytes 12-15 */ - unsigned int StatusChangeCounter; /* Bytes 16-19 */ - unsigned int :32; /* Bytes 20-23 */ - unsigned int DebugOutputMessageBufferIndex; /* Bytes 24-27 */ - unsigned int CodedMessageBufferIndex; /* Bytes 28-31 */ - unsigned int CurrentTimeTracePageNumber; /* Bytes 32-35 */ - unsigned int CurrentProfilerPageNumber; /* Bytes 36-39 */ - unsigned int NextEventSequenceNumber; /* Bytes 40-43 */ - unsigned int :32; /* Bytes 44-47 */ - unsigned char Reserved1[16]; /* Bytes 48-63 */ - unsigned char Reserved2[64]; /* Bytes 64-127 */ -} -DAC960_V2_HealthStatusBuffer_T; - - -/* - Define the DAC960 V2 Firmware Get Event reply structure. -*/ - -typedef struct DAC960_V2_Event -{ - unsigned int EventSequenceNumber; /* Bytes 0-3 */ - unsigned int EventTime; /* Bytes 4-7 */ - unsigned int EventCode; /* Bytes 8-11 */ - unsigned char :8; /* Byte 12 */ - unsigned char Channel; /* Byte 13 */ - unsigned char TargetID; /* Byte 14 */ - unsigned char LogicalUnit; /* Byte 15 */ - unsigned int :32; /* Bytes 16-19 */ - unsigned int EventSpecificParameter; /* Bytes 20-23 */ - unsigned char RequestSenseData[40]; /* Bytes 24-63 */ -} -DAC960_V2_Event_T; - - -/* - Define the DAC960 V2 Firmware Command Control Bits structure. -*/ - -typedef struct DAC960_V2_CommandControlBits -{ - bool ForceUnitAccess:1; /* Byte 0 Bit 0 */ - bool DisablePageOut:1; /* Byte 0 Bit 1 */ - bool :1; /* Byte 0 Bit 2 */ - bool AdditionalScatterGatherListMemory:1; /* Byte 0 Bit 3 */ - bool DataTransferControllerToHost:1; /* Byte 0 Bit 4 */ - bool :1; /* Byte 0 Bit 5 */ - bool NoAutoRequestSense:1; /* Byte 0 Bit 6 */ - bool DisconnectProhibited:1; /* Byte 0 Bit 7 */ -} -DAC960_V2_CommandControlBits_T; - - -/* - Define the DAC960 V2 Firmware Command Timeout structure. -*/ - -typedef struct DAC960_V2_CommandTimeout -{ - unsigned char TimeoutValue:6; /* Byte 0 Bits 0-5 */ - enum { - DAC960_V2_TimeoutScale_Seconds = 0, - DAC960_V2_TimeoutScale_Minutes = 1, - DAC960_V2_TimeoutScale_Hours = 2, - DAC960_V2_TimeoutScale_Reserved = 3 - } __attribute__ ((packed)) TimeoutScale:2; /* Byte 0 Bits 6-7 */ -} -DAC960_V2_CommandTimeout_T; - - -/* - Define the DAC960 V2 Firmware Physical Device structure. -*/ - -typedef struct DAC960_V2_PhysicalDevice -{ - unsigned char LogicalUnit; /* Byte 0 */ - unsigned char TargetID; /* Byte 1 */ - unsigned char Channel:3; /* Byte 2 Bits 0-2 */ - unsigned char Controller:5; /* Byte 2 Bits 3-7 */ -} -__attribute__ ((packed)) -DAC960_V2_PhysicalDevice_T; - - -/* - Define the DAC960 V2 Firmware Logical Device structure. -*/ - -typedef struct DAC960_V2_LogicalDevice -{ - unsigned short LogicalDeviceNumber; /* Bytes 0-1 */ - unsigned char :3; /* Byte 2 Bits 0-2 */ - unsigned char Controller:5; /* Byte 2 Bits 3-7 */ -} -__attribute__ ((packed)) -DAC960_V2_LogicalDevice_T; - - -/* - Define the DAC960 V2 Firmware Operation Device type. -*/ - -typedef enum -{ - DAC960_V2_Physical_Device = 0x00, - DAC960_V2_RAID_Device = 0x01, - DAC960_V2_Physical_Channel = 0x02, - DAC960_V2_RAID_Channel = 0x03, - DAC960_V2_Physical_Controller = 0x04, - DAC960_V2_RAID_Controller = 0x05, - DAC960_V2_Configuration_Group = 0x10, - DAC960_V2_Enclosure = 0x11 -} -__attribute__ ((packed)) -DAC960_V2_OperationDevice_T; - - -/* - Define the DAC960 V2 Firmware Translate Physical To Logical Device structure. -*/ - -typedef struct DAC960_V2_PhysicalToLogicalDevice -{ - unsigned short LogicalDeviceNumber; /* Bytes 0-1 */ - unsigned short :16; /* Bytes 2-3 */ - unsigned char PreviousBootController; /* Byte 4 */ - unsigned char PreviousBootChannel; /* Byte 5 */ - unsigned char PreviousBootTargetID; /* Byte 6 */ - unsigned char PreviousBootLogicalUnit; /* Byte 7 */ -} -DAC960_V2_PhysicalToLogicalDevice_T; - - - -/* - Define the DAC960 V2 Firmware Scatter/Gather List Entry structure. -*/ - -typedef struct DAC960_V2_ScatterGatherSegment -{ - DAC960_BusAddress64_T SegmentDataPointer; /* Bytes 0-7 */ - DAC960_ByteCount64_T SegmentByteCount; /* Bytes 8-15 */ -} -DAC960_V2_ScatterGatherSegment_T; - - -/* - Define the DAC960 V2 Firmware Data Transfer Memory Address structure. -*/ - -typedef union DAC960_V2_DataTransferMemoryAddress -{ - DAC960_V2_ScatterGatherSegment_T ScatterGatherSegments[2]; /* Bytes 0-31 */ - struct { - unsigned short ScatterGatherList0Length; /* Bytes 0-1 */ - unsigned short ScatterGatherList1Length; /* Bytes 2-3 */ - unsigned short ScatterGatherList2Length; /* Bytes 4-5 */ - unsigned short :16; /* Bytes 6-7 */ - DAC960_BusAddress64_T ScatterGatherList0Address; /* Bytes 8-15 */ - DAC960_BusAddress64_T ScatterGatherList1Address; /* Bytes 16-23 */ - DAC960_BusAddress64_T ScatterGatherList2Address; /* Bytes 24-31 */ - } ExtendedScatterGather; -} -DAC960_V2_DataTransferMemoryAddress_T; - - -/* - Define the 64 Byte DAC960 V2 Firmware Command Mailbox structure. -*/ - -typedef union DAC960_V2_CommandMailbox -{ - unsigned int Words[16]; /* Words 0-15 */ - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - unsigned int :24; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - unsigned char Reserved[10]; /* Bytes 22-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } Common; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char CDBLength; /* Byte 21 */ - unsigned char SCSI_CDB[10]; /* Bytes 22-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } SCSI_10; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize; /* Bytes 4-7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char CDBLength; /* Byte 21 */ - unsigned short :16; /* Bytes 22-23 */ - DAC960_BusAddress64_T SCSI_CDB_BusAddress; /* Bytes 24-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } SCSI_255; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - unsigned short :16; /* Bytes 16-17 */ - unsigned char ControllerNumber; /* Byte 18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - unsigned char Reserved[10]; /* Bytes 22-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } ControllerInfo; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - unsigned char Reserved[10]; /* Bytes 22-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } LogicalDeviceInfo; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - unsigned char Reserved[10]; /* Bytes 22-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } PhysicalDeviceInfo; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - unsigned short EventSequenceNumberHigh16; /* Bytes 16-17 */ - unsigned char ControllerNumber; /* Byte 18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - unsigned short EventSequenceNumberLow16; /* Bytes 22-23 */ - unsigned char Reserved[8]; /* Bytes 24-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } GetEvent; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - union { - DAC960_V2_LogicalDeviceState_T LogicalDeviceState; - DAC960_V2_PhysicalDeviceState_T PhysicalDeviceState; - } DeviceState; /* Byte 22 */ - unsigned char Reserved[9]; /* Bytes 23-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } SetDeviceState; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_LogicalDevice_T LogicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - bool RestoreConsistency:1; /* Byte 22 Bit 0 */ - bool InitializedAreaOnly:1; /* Byte 22 Bit 1 */ - unsigned char :6; /* Byte 22 Bits 2-7 */ - unsigned char Reserved[9]; /* Bytes 23-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } ConsistencyCheck; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - unsigned char FirstCommandMailboxSizeKB; /* Byte 4 */ - unsigned char FirstStatusMailboxSizeKB; /* Byte 5 */ - unsigned char SecondCommandMailboxSizeKB; /* Byte 6 */ - unsigned char SecondStatusMailboxSizeKB; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - unsigned int :24; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - unsigned char HealthStatusBufferSizeKB; /* Byte 22 */ - unsigned char :8; /* Byte 23 */ - DAC960_BusAddress64_T HealthStatusBufferBusAddress; /* Bytes 24-31 */ - DAC960_BusAddress64_T FirstCommandMailboxBusAddress; /* Bytes 32-39 */ - DAC960_BusAddress64_T FirstStatusMailboxBusAddress; /* Bytes 40-47 */ - DAC960_BusAddress64_T SecondCommandMailboxBusAddress; /* Bytes 48-55 */ - DAC960_BusAddress64_T SecondStatusMailboxBusAddress; /* Bytes 56-63 */ - } SetMemoryMailbox; - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandOpcode_T CommandOpcode; /* Byte 2 */ - DAC960_V2_CommandControlBits_T CommandControlBits; /* Byte 3 */ - DAC960_ByteCount32_T DataTransferSize:24; /* Bytes 4-6 */ - unsigned char DataTransferPageNumber; /* Byte 7 */ - DAC960_BusAddress64_T RequestSenseBusAddress; /* Bytes 8-15 */ - DAC960_V2_PhysicalDevice_T PhysicalDevice; /* Bytes 16-18 */ - DAC960_V2_CommandTimeout_T CommandTimeout; /* Byte 19 */ - unsigned char RequestSenseSize; /* Byte 20 */ - unsigned char IOCTL_Opcode; /* Byte 21 */ - DAC960_V2_OperationDevice_T OperationDevice; /* Byte 22 */ - unsigned char Reserved[9]; /* Bytes 23-31 */ - DAC960_V2_DataTransferMemoryAddress_T - DataTransferMemoryAddress; /* Bytes 32-63 */ - } DeviceOperation; -} -DAC960_V2_CommandMailbox_T; - - -/* - Define the DAC960 Driver IOCTL requests. -*/ - -#define DAC960_IOCTL_GET_CONTROLLER_COUNT 0xDAC001 -#define DAC960_IOCTL_GET_CONTROLLER_INFO 0xDAC002 -#define DAC960_IOCTL_V1_EXECUTE_COMMAND 0xDAC003 -#define DAC960_IOCTL_V2_EXECUTE_COMMAND 0xDAC004 -#define DAC960_IOCTL_V2_GET_HEALTH_STATUS 0xDAC005 - - -/* - Define the DAC960_IOCTL_GET_CONTROLLER_INFO reply structure. -*/ - -typedef struct DAC960_ControllerInfo -{ - unsigned char ControllerNumber; - unsigned char FirmwareType; - unsigned char Channels; - unsigned char Targets; - unsigned char PCI_Bus; - unsigned char PCI_Device; - unsigned char PCI_Function; - unsigned char IRQ_Channel; - DAC960_PCI_Address_T PCI_Address; - unsigned char ModelName[20]; - unsigned char FirmwareVersion[12]; -} -DAC960_ControllerInfo_T; - - -/* - Define the User Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure. -*/ - -typedef struct DAC960_V1_UserCommand -{ - unsigned char ControllerNumber; - DAC960_V1_CommandMailbox_T CommandMailbox; - int DataTransferLength; - void __user *DataTransferBuffer; - DAC960_V1_DCDB_T __user *DCDB; -} -DAC960_V1_UserCommand_T; - - -/* - Define the Kernel Mode DAC960_IOCTL_V1_EXECUTE_COMMAND request structure. -*/ - -typedef struct DAC960_V1_KernelCommand -{ - unsigned char ControllerNumber; - DAC960_V1_CommandMailbox_T CommandMailbox; - int DataTransferLength; - void *DataTransferBuffer; - DAC960_V1_DCDB_T *DCDB; - DAC960_V1_CommandStatus_T CommandStatus; - void (*CompletionFunction)(struct DAC960_V1_KernelCommand *); - void *CompletionData; -} -DAC960_V1_KernelCommand_T; - - -/* - Define the User Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure. -*/ - -typedef struct DAC960_V2_UserCommand -{ - unsigned char ControllerNumber; - DAC960_V2_CommandMailbox_T CommandMailbox; - int DataTransferLength; - int RequestSenseLength; - void __user *DataTransferBuffer; - void __user *RequestSenseBuffer; -} -DAC960_V2_UserCommand_T; - - -/* - Define the Kernel Mode DAC960_IOCTL_V2_EXECUTE_COMMAND request structure. -*/ - -typedef struct DAC960_V2_KernelCommand -{ - unsigned char ControllerNumber; - DAC960_V2_CommandMailbox_T CommandMailbox; - int DataTransferLength; - int RequestSenseLength; - void *DataTransferBuffer; - void *RequestSenseBuffer; - DAC960_V2_CommandStatus_T CommandStatus; - void (*CompletionFunction)(struct DAC960_V2_KernelCommand *); - void *CompletionData; -} -DAC960_V2_KernelCommand_T; - - -/* - Define the User Mode DAC960_IOCTL_V2_GET_HEALTH_STATUS request structure. -*/ - -typedef struct DAC960_V2_GetHealthStatus -{ - unsigned char ControllerNumber; - DAC960_V2_HealthStatusBuffer_T __user *HealthStatusBuffer; -} -DAC960_V2_GetHealthStatus_T; - - -/* - Import the Kernel Mode IOCTL interface. -*/ - -extern int DAC960_KernelIOCTL(unsigned int Request, void *Argument); - - -/* - DAC960_DriverVersion protects the private portion of this file. -*/ - -#ifdef DAC960_DriverVersion - - -/* - Define the maximum Driver Queue Depth and Controller Queue Depth supported - by DAC960 V1 and V2 Firmware Controllers. -*/ - -#define DAC960_MaxDriverQueueDepth 511 -#define DAC960_MaxControllerQueueDepth 512 - - -/* - Define the maximum number of Scatter/Gather Segments supported for any - DAC960 V1 and V2 Firmware controller. -*/ - -#define DAC960_V1_ScatterGatherLimit 33 -#define DAC960_V2_ScatterGatherLimit 128 - - -/* - Define the number of Command Mailboxes and Status Mailboxes used by the - DAC960 V1 and V2 Firmware Memory Mailbox Interface. -*/ - -#define DAC960_V1_CommandMailboxCount 256 -#define DAC960_V1_StatusMailboxCount 1024 -#define DAC960_V2_CommandMailboxCount 512 -#define DAC960_V2_StatusMailboxCount 512 - - -/* - Define the DAC960 Controller Monitoring Timer Interval. -*/ - -#define DAC960_MonitoringTimerInterval (10 * HZ) - - -/* - Define the DAC960 Controller Secondary Monitoring Interval. -*/ - -#define DAC960_SecondaryMonitoringInterval (60 * HZ) - - -/* - Define the DAC960 Controller Health Status Monitoring Interval. -*/ - -#define DAC960_HealthStatusMonitoringInterval (1 * HZ) - - -/* - Define the DAC960 Controller Progress Reporting Interval. -*/ - -#define DAC960_ProgressReportingInterval (60 * HZ) - - -/* - Define the maximum number of Partitions allowed for each Logical Drive. -*/ - -#define DAC960_MaxPartitions 8 -#define DAC960_MaxPartitionsBits 3 - -/* - Define the DAC960 Controller fixed Block Size and Block Size Bits. -*/ - -#define DAC960_BlockSize 512 -#define DAC960_BlockSizeBits 9 - - -/* - Define the number of Command structures that should be allocated as a - group to optimize kernel memory allocation. -*/ - -#define DAC960_V1_CommandAllocationGroupSize 11 -#define DAC960_V2_CommandAllocationGroupSize 29 - - -/* - Define the Controller Line Buffer, Progress Buffer, User Message, and - Initial Status Buffer sizes. -*/ - -#define DAC960_LineBufferSize 100 -#define DAC960_ProgressBufferSize 200 -#define DAC960_UserMessageSize 200 -#define DAC960_InitialStatusBufferSize (8192-32) - - -/* - Define the DAC960 Controller Firmware Types. -*/ - -typedef enum -{ - DAC960_V1_Controller = 1, - DAC960_V2_Controller = 2 -} -DAC960_FirmwareType_T; - - -/* - Define the DAC960 Controller Hardware Types. -*/ - -typedef enum -{ - DAC960_BA_Controller = 1, /* eXtremeRAID 2000 */ - DAC960_LP_Controller = 2, /* AcceleRAID 352 */ - DAC960_LA_Controller = 3, /* DAC1164P */ - DAC960_PG_Controller = 4, /* DAC960PTL/PJ/PG */ - DAC960_PD_Controller = 5, /* DAC960PU/PD/PL/P */ - DAC960_P_Controller = 6, /* DAC960PU/PD/PL/P */ - DAC960_GEM_Controller = 7, /* AcceleRAID 4/5/600 */ -} -DAC960_HardwareType_T; - - -/* - Define the Driver Message Levels. -*/ - -typedef enum DAC960_MessageLevel -{ - DAC960_AnnounceLevel = 0, - DAC960_InfoLevel = 1, - DAC960_NoticeLevel = 2, - DAC960_WarningLevel = 3, - DAC960_ErrorLevel = 4, - DAC960_ProgressLevel = 5, - DAC960_CriticalLevel = 6, - DAC960_UserCriticalLevel = 7 -} -DAC960_MessageLevel_T; - -static char - *DAC960_MessageLevelMap[] = - { KERN_NOTICE, KERN_NOTICE, KERN_NOTICE, KERN_WARNING, - KERN_ERR, KERN_CRIT, KERN_CRIT, KERN_CRIT }; - - -/* - Define Driver Message macros. -*/ - -#define DAC960_Announce(Format, Arguments...) \ - DAC960_Message(DAC960_AnnounceLevel, Format, ##Arguments) - -#define DAC960_Info(Format, Arguments...) \ - DAC960_Message(DAC960_InfoLevel, Format, ##Arguments) - -#define DAC960_Notice(Format, Arguments...) \ - DAC960_Message(DAC960_NoticeLevel, Format, ##Arguments) - -#define DAC960_Warning(Format, Arguments...) \ - DAC960_Message(DAC960_WarningLevel, Format, ##Arguments) - -#define DAC960_Error(Format, Arguments...) \ - DAC960_Message(DAC960_ErrorLevel, Format, ##Arguments) - -#define DAC960_Progress(Format, Arguments...) \ - DAC960_Message(DAC960_ProgressLevel, Format, ##Arguments) - -#define DAC960_Critical(Format, Arguments...) \ - DAC960_Message(DAC960_CriticalLevel, Format, ##Arguments) - -#define DAC960_UserCritical(Format, Arguments...) \ - DAC960_Message(DAC960_UserCriticalLevel, Format, ##Arguments) - - -struct DAC960_privdata { - DAC960_HardwareType_T HardwareType; - DAC960_FirmwareType_T FirmwareType; - irq_handler_t InterruptHandler; - unsigned int MemoryWindowSize; -}; - - -/* - Define the DAC960 V1 Firmware Controller Status Mailbox structure. -*/ - -typedef union DAC960_V1_StatusMailbox -{ - unsigned int Word; /* Word 0 */ - struct { - DAC960_V1_CommandIdentifier_T CommandIdentifier; /* Byte 0 */ - unsigned char :7; /* Byte 1 Bits 0-6 */ - bool Valid:1; /* Byte 1 Bit 7 */ - DAC960_V1_CommandStatus_T CommandStatus; /* Bytes 2-3 */ - } Fields; -} -DAC960_V1_StatusMailbox_T; - - -/* - Define the DAC960 V2 Firmware Controller Status Mailbox structure. -*/ - -typedef union DAC960_V2_StatusMailbox -{ - unsigned int Words[2]; /* Words 0-1 */ - struct { - DAC960_V2_CommandIdentifier_T CommandIdentifier; /* Bytes 0-1 */ - DAC960_V2_CommandStatus_T CommandStatus; /* Byte 2 */ - unsigned char RequestSenseLength; /* Byte 3 */ - int DataTransferResidue; /* Bytes 4-7 */ - } Fields; -} -DAC960_V2_StatusMailbox_T; - - -/* - Define the DAC960 Driver Command Types. -*/ - -typedef enum -{ - DAC960_ReadCommand = 1, - DAC960_WriteCommand = 2, - DAC960_ReadRetryCommand = 3, - DAC960_WriteRetryCommand = 4, - DAC960_MonitoringCommand = 5, - DAC960_ImmediateCommand = 6, - DAC960_QueuedCommand = 7 -} -DAC960_CommandType_T; - - -/* - Define the DAC960 Driver Command structure. -*/ - -typedef struct DAC960_Command -{ - int CommandIdentifier; - DAC960_CommandType_T CommandType; - struct DAC960_Controller *Controller; - struct DAC960_Command *Next; - struct completion *Completion; - unsigned int LogicalDriveNumber; - unsigned int BlockNumber; - unsigned int BlockCount; - unsigned int SegmentCount; - int DmaDirection; - struct scatterlist *cmd_sglist; - struct request *Request; - union { - struct { - DAC960_V1_CommandMailbox_T CommandMailbox; - DAC960_V1_KernelCommand_T *KernelCommand; - DAC960_V1_CommandStatus_T CommandStatus; - DAC960_V1_ScatterGatherSegment_T *ScatterGatherList; - dma_addr_t ScatterGatherListDMA; - struct scatterlist ScatterList[DAC960_V1_ScatterGatherLimit]; - unsigned int EndMarker[0]; - } V1; - struct { - DAC960_V2_CommandMailbox_T CommandMailbox; - DAC960_V2_KernelCommand_T *KernelCommand; - DAC960_V2_CommandStatus_T CommandStatus; - unsigned char RequestSenseLength; - int DataTransferResidue; - DAC960_V2_ScatterGatherSegment_T *ScatterGatherList; - dma_addr_t ScatterGatherListDMA; - DAC960_SCSI_RequestSense_T *RequestSense; - dma_addr_t RequestSenseDMA; - struct scatterlist ScatterList[DAC960_V2_ScatterGatherLimit]; - unsigned int EndMarker[0]; - } V2; - } FW; -} -DAC960_Command_T; - - -/* - Define the DAC960 Driver Controller structure. -*/ - -typedef struct DAC960_Controller -{ - void __iomem *BaseAddress; - void __iomem *MemoryMappedAddress; - DAC960_FirmwareType_T FirmwareType; - DAC960_HardwareType_T HardwareType; - DAC960_IO_Address_T IO_Address; - DAC960_PCI_Address_T PCI_Address; - struct pci_dev *PCIDevice; - unsigned char ControllerNumber; - unsigned char ControllerName[4]; - unsigned char ModelName[20]; - unsigned char FullModelName[28]; - unsigned char FirmwareVersion[12]; - unsigned char Bus; - unsigned char Device; - unsigned char Function; - unsigned char IRQ_Channel; - unsigned char Channels; - unsigned char Targets; - unsigned char MemorySize; - unsigned char LogicalDriveCount; - unsigned short CommandAllocationGroupSize; - unsigned short ControllerQueueDepth; - unsigned short DriverQueueDepth; - unsigned short MaxBlocksPerCommand; - unsigned short ControllerScatterGatherLimit; - unsigned short DriverScatterGatherLimit; - unsigned int CombinedStatusBufferLength; - unsigned int InitialStatusLength; - unsigned int CurrentStatusLength; - unsigned int ProgressBufferLength; - unsigned int UserStatusLength; - struct dma_loaf DmaPages; - unsigned long MonitoringTimerCount; - unsigned long PrimaryMonitoringTime; - unsigned long SecondaryMonitoringTime; - unsigned long ShutdownMonitoringTimer; - unsigned long LastProgressReportTime; - unsigned long LastCurrentStatusTime; - bool ControllerInitialized; - bool MonitoringCommandDeferred; - bool EphemeralProgressMessage; - bool DriveSpinUpMessageDisplayed; - bool MonitoringAlertMode; - bool SuppressEnclosureMessages; - struct timer_list MonitoringTimer; - struct gendisk *disks[DAC960_MaxLogicalDrives]; - struct dma_pool *ScatterGatherPool; - DAC960_Command_T *FreeCommands; - unsigned char *CombinedStatusBuffer; - unsigned char *CurrentStatusBuffer; - struct request_queue *RequestQueue[DAC960_MaxLogicalDrives]; - int req_q_index; - spinlock_t queue_lock; - wait_queue_head_t CommandWaitQueue; - wait_queue_head_t HealthStatusWaitQueue; - DAC960_Command_T InitialCommand; - DAC960_Command_T *Commands[DAC960_MaxDriverQueueDepth]; - struct proc_dir_entry *ControllerProcEntry; - bool LogicalDriveInitiallyAccessible[DAC960_MaxLogicalDrives]; - void (*QueueCommand)(DAC960_Command_T *Command); - bool (*ReadControllerConfiguration)(struct DAC960_Controller *); - bool (*ReadDeviceConfiguration)(struct DAC960_Controller *); - bool (*ReportDeviceConfiguration)(struct DAC960_Controller *); - void (*QueueReadWriteCommand)(DAC960_Command_T *Command); - union { - struct { - unsigned char GeometryTranslationHeads; - unsigned char GeometryTranslationSectors; - unsigned char PendingRebuildFlag; - unsigned short StripeSize; - unsigned short SegmentSize; - unsigned short NewEventLogSequenceNumber; - unsigned short OldEventLogSequenceNumber; - unsigned short DeviceStateChannel; - unsigned short DeviceStateTargetID; - bool DualModeMemoryMailboxInterface; - bool BackgroundInitializationStatusSupported; - bool SAFTE_EnclosureManagementEnabled; - bool NeedLogicalDriveInformation; - bool NeedErrorTableInformation; - bool NeedDeviceStateInformation; - bool NeedDeviceInquiryInformation; - bool NeedDeviceSerialNumberInformation; - bool NeedRebuildProgress; - bool NeedConsistencyCheckProgress; - bool NeedBackgroundInitializationStatus; - bool StartDeviceStateScan; - bool RebuildProgressFirst; - bool RebuildFlagPending; - bool RebuildStatusPending; - - dma_addr_t FirstCommandMailboxDMA; - DAC960_V1_CommandMailbox_T *FirstCommandMailbox; - DAC960_V1_CommandMailbox_T *LastCommandMailbox; - DAC960_V1_CommandMailbox_T *NextCommandMailbox; - DAC960_V1_CommandMailbox_T *PreviousCommandMailbox1; - DAC960_V1_CommandMailbox_T *PreviousCommandMailbox2; - - dma_addr_t FirstStatusMailboxDMA; - DAC960_V1_StatusMailbox_T *FirstStatusMailbox; - DAC960_V1_StatusMailbox_T *LastStatusMailbox; - DAC960_V1_StatusMailbox_T *NextStatusMailbox; - - DAC960_V1_DCDB_T *MonitoringDCDB; - dma_addr_t MonitoringDCDB_DMA; - - DAC960_V1_Enquiry_T Enquiry; - DAC960_V1_Enquiry_T *NewEnquiry; - dma_addr_t NewEnquiryDMA; - - DAC960_V1_ErrorTable_T ErrorTable; - DAC960_V1_ErrorTable_T *NewErrorTable; - dma_addr_t NewErrorTableDMA; - - DAC960_V1_EventLogEntry_T *EventLogEntry; - dma_addr_t EventLogEntryDMA; - - DAC960_V1_RebuildProgress_T *RebuildProgress; - dma_addr_t RebuildProgressDMA; - DAC960_V1_CommandStatus_T LastRebuildStatus; - DAC960_V1_CommandStatus_T PendingRebuildStatus; - - DAC960_V1_LogicalDriveInformationArray_T LogicalDriveInformation; - DAC960_V1_LogicalDriveInformationArray_T *NewLogicalDriveInformation; - dma_addr_t NewLogicalDriveInformationDMA; - - DAC960_V1_BackgroundInitializationStatus_T - *BackgroundInitializationStatus; - dma_addr_t BackgroundInitializationStatusDMA; - DAC960_V1_BackgroundInitializationStatus_T - LastBackgroundInitializationStatus; - - DAC960_V1_DeviceState_T - DeviceState[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets]; - DAC960_V1_DeviceState_T *NewDeviceState; - dma_addr_t NewDeviceStateDMA; - - DAC960_SCSI_Inquiry_T - InquiryStandardData[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets]; - DAC960_SCSI_Inquiry_T *NewInquiryStandardData; - dma_addr_t NewInquiryStandardDataDMA; - - DAC960_SCSI_Inquiry_UnitSerialNumber_T - InquiryUnitSerialNumber[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets]; - DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber; - dma_addr_t NewInquiryUnitSerialNumberDMA; - - int DeviceResetCount[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets]; - bool DirectCommandActive[DAC960_V1_MaxChannels][DAC960_V1_MaxTargets]; - } V1; - struct { - unsigned int StatusChangeCounter; - unsigned int NextEventSequenceNumber; - unsigned int PhysicalDeviceIndex; - bool NeedLogicalDeviceInformation; - bool NeedPhysicalDeviceInformation; - bool NeedDeviceSerialNumberInformation; - bool StartLogicalDeviceInformationScan; - bool StartPhysicalDeviceInformationScan; - struct dma_pool *RequestSensePool; - - dma_addr_t FirstCommandMailboxDMA; - DAC960_V2_CommandMailbox_T *FirstCommandMailbox; - DAC960_V2_CommandMailbox_T *LastCommandMailbox; - DAC960_V2_CommandMailbox_T *NextCommandMailbox; - DAC960_V2_CommandMailbox_T *PreviousCommandMailbox1; - DAC960_V2_CommandMailbox_T *PreviousCommandMailbox2; - - dma_addr_t FirstStatusMailboxDMA; - DAC960_V2_StatusMailbox_T *FirstStatusMailbox; - DAC960_V2_StatusMailbox_T *LastStatusMailbox; - DAC960_V2_StatusMailbox_T *NextStatusMailbox; - - dma_addr_t HealthStatusBufferDMA; - DAC960_V2_HealthStatusBuffer_T *HealthStatusBuffer; - - DAC960_V2_ControllerInfo_T ControllerInformation; - DAC960_V2_ControllerInfo_T *NewControllerInformation; - dma_addr_t NewControllerInformationDMA; - - DAC960_V2_LogicalDeviceInfo_T - *LogicalDeviceInformation[DAC960_MaxLogicalDrives]; - DAC960_V2_LogicalDeviceInfo_T *NewLogicalDeviceInformation; - dma_addr_t NewLogicalDeviceInformationDMA; - - DAC960_V2_PhysicalDeviceInfo_T - *PhysicalDeviceInformation[DAC960_V2_MaxPhysicalDevices]; - DAC960_V2_PhysicalDeviceInfo_T *NewPhysicalDeviceInformation; - dma_addr_t NewPhysicalDeviceInformationDMA; - - DAC960_SCSI_Inquiry_UnitSerialNumber_T *NewInquiryUnitSerialNumber; - dma_addr_t NewInquiryUnitSerialNumberDMA; - DAC960_SCSI_Inquiry_UnitSerialNumber_T - *InquiryUnitSerialNumber[DAC960_V2_MaxPhysicalDevices]; - - DAC960_V2_Event_T *Event; - dma_addr_t EventDMA; - - DAC960_V2_PhysicalToLogicalDevice_T *PhysicalToLogicalDevice; - dma_addr_t PhysicalToLogicalDeviceDMA; - - DAC960_V2_PhysicalDevice_T - LogicalDriveToVirtualDevice[DAC960_MaxLogicalDrives]; - bool LogicalDriveFoundDuringScan[DAC960_MaxLogicalDrives]; - } V2; - } FW; - unsigned char ProgressBuffer[DAC960_ProgressBufferSize]; - unsigned char UserStatusBuffer[DAC960_UserMessageSize]; -} -DAC960_Controller_T; - - -/* - Simplify access to Firmware Version Dependent Data Structure Components - and Functions. -*/ - -#define V1 FW.V1 -#define V2 FW.V2 -#define DAC960_QueueCommand(Command) \ - (Controller->QueueCommand)(Command) -#define DAC960_ReadControllerConfiguration(Controller) \ - (Controller->ReadControllerConfiguration)(Controller) -#define DAC960_ReadDeviceConfiguration(Controller) \ - (Controller->ReadDeviceConfiguration)(Controller) -#define DAC960_ReportDeviceConfiguration(Controller) \ - (Controller->ReportDeviceConfiguration)(Controller) -#define DAC960_QueueReadWriteCommand(Command) \ - (Controller->QueueReadWriteCommand)(Command) - -/* - * dma_addr_writeql is provided to write dma_addr_t types - * to a 64-bit pci address space register. The controller - * will accept having the register written as two 32-bit - * values. - * - * In HIGHMEM kernels, dma_addr_t is a 64-bit value. - * without HIGHMEM, dma_addr_t is a 32-bit value. - * - * The compiler should always fix up the assignment - * to u.wq appropriately, depending upon the size of - * dma_addr_t. - */ -static inline -void dma_addr_writeql(dma_addr_t addr, void __iomem *write_address) -{ - union { - u64 wq; - uint wl[2]; - } u; - - u.wq = addr; - - writel(u.wl[0], write_address); - writel(u.wl[1], write_address + 4); -} - -/* - Define the DAC960 GEM Series Controller Interface Register Offsets. - */ - -#define DAC960_GEM_RegisterWindowSize 0x600 - -typedef enum -{ - DAC960_GEM_InboundDoorBellRegisterReadSetOffset = 0x214, - DAC960_GEM_InboundDoorBellRegisterClearOffset = 0x218, - DAC960_GEM_OutboundDoorBellRegisterReadSetOffset = 0x224, - DAC960_GEM_OutboundDoorBellRegisterClearOffset = 0x228, - DAC960_GEM_InterruptStatusRegisterOffset = 0x208, - DAC960_GEM_InterruptMaskRegisterReadSetOffset = 0x22C, - DAC960_GEM_InterruptMaskRegisterClearOffset = 0x230, - DAC960_GEM_CommandMailboxBusAddressOffset = 0x510, - DAC960_GEM_CommandStatusOffset = 0x518, - DAC960_GEM_ErrorStatusRegisterReadSetOffset = 0x224, - DAC960_GEM_ErrorStatusRegisterClearOffset = 0x228, -} -DAC960_GEM_RegisterOffsets_T; - -/* - Define the structure of the DAC960 GEM Series Inbound Door Bell - */ - -typedef union DAC960_GEM_InboundDoorBellRegister -{ - unsigned int All; - struct { - unsigned int :24; - bool HardwareMailboxNewCommand:1; - bool AcknowledgeHardwareMailboxStatus:1; - bool GenerateInterrupt:1; - bool ControllerReset:1; - bool MemoryMailboxNewCommand:1; - unsigned int :3; - } Write; - struct { - unsigned int :24; - bool HardwareMailboxFull:1; - bool InitializationInProgress:1; - unsigned int :6; - } Read; -} -DAC960_GEM_InboundDoorBellRegister_T; - -/* - Define the structure of the DAC960 GEM Series Outbound Door Bell Register. - */ -typedef union DAC960_GEM_OutboundDoorBellRegister -{ - unsigned int All; - struct { - unsigned int :24; - bool AcknowledgeHardwareMailboxInterrupt:1; - bool AcknowledgeMemoryMailboxInterrupt:1; - unsigned int :6; - } Write; - struct { - unsigned int :24; - bool HardwareMailboxStatusAvailable:1; - bool MemoryMailboxStatusAvailable:1; - unsigned int :6; - } Read; -} -DAC960_GEM_OutboundDoorBellRegister_T; - -/* - Define the structure of the DAC960 GEM Series Interrupt Mask Register. - */ -typedef union DAC960_GEM_InterruptMaskRegister -{ - unsigned int All; - struct { - unsigned int :16; - unsigned int :8; - unsigned int HardwareMailboxInterrupt:1; - unsigned int MemoryMailboxInterrupt:1; - unsigned int :6; - } Bits; -} -DAC960_GEM_InterruptMaskRegister_T; - -/* - Define the structure of the DAC960 GEM Series Error Status Register. - */ - -typedef union DAC960_GEM_ErrorStatusRegister -{ - unsigned int All; - struct { - unsigned int :24; - unsigned int :5; - bool ErrorStatusPending:1; - unsigned int :2; - } Bits; -} -DAC960_GEM_ErrorStatusRegister_T; - -/* - Define inline functions to provide an abstraction for reading and writing the - DAC960 GEM Series Controller Interface Registers. -*/ - -static inline -void DAC960_GEM_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset); -} - -static inline -void DAC960_GEM_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterClearOffset); -} - -static inline -void DAC960_GEM_GenerateInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.GenerateInterrupt = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset); -} - -static inline -void DAC960_GEM_ControllerReset(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.ControllerReset = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset); -} - -static inline -void DAC960_GEM_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_InboundDoorBellRegisterReadSetOffset); -} - -static inline -bool DAC960_GEM_HardwareMailboxFullP(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readl(ControllerBaseAddress + - DAC960_GEM_InboundDoorBellRegisterReadSetOffset); - return InboundDoorBellRegister.Read.HardwareMailboxFull; -} - -static inline -bool DAC960_GEM_InitializationInProgressP(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readl(ControllerBaseAddress + - DAC960_GEM_InboundDoorBellRegisterReadSetOffset); - return InboundDoorBellRegister.Read.InitializationInProgress; -} - -static inline -void DAC960_GEM_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - writel(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset); -} - -static inline -void DAC960_GEM_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writel(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset); -} - -static inline -void DAC960_GEM_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writel(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_GEM_OutboundDoorBellRegisterClearOffset); -} - -static inline -bool DAC960_GEM_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readl(ControllerBaseAddress + - DAC960_GEM_OutboundDoorBellRegisterReadSetOffset); - return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable; -} - -static inline -bool DAC960_GEM_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readl(ControllerBaseAddress + - DAC960_GEM_OutboundDoorBellRegisterReadSetOffset); - return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable; -} - -static inline -void DAC960_GEM_EnableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0; - InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true; - InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true; - writel(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterClearOffset); -} - -static inline -void DAC960_GEM_DisableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0; - InterruptMaskRegister.Bits.HardwareMailboxInterrupt = true; - InterruptMaskRegister.Bits.MemoryMailboxInterrupt = true; - writel(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_GEM_InterruptMaskRegisterReadSetOffset); -} - -static inline -bool DAC960_GEM_InterruptsEnabledP(void __iomem *ControllerBaseAddress) -{ - DAC960_GEM_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = - readl(ControllerBaseAddress + - DAC960_GEM_InterruptMaskRegisterReadSetOffset); - return !(InterruptMaskRegister.Bits.HardwareMailboxInterrupt || - InterruptMaskRegister.Bits.MemoryMailboxInterrupt); -} - -static inline -void DAC960_GEM_WriteCommandMailbox(DAC960_V2_CommandMailbox_T - *MemoryCommandMailbox, - DAC960_V2_CommandMailbox_T - *CommandMailbox) -{ - memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1], - sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int)); - wmb(); - MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0]; - mb(); -} - -static inline -void DAC960_GEM_WriteHardwareMailbox(void __iomem *ControllerBaseAddress, - dma_addr_t CommandMailboxDMA) -{ - dma_addr_writeql(CommandMailboxDMA, - ControllerBaseAddress + - DAC960_GEM_CommandMailboxBusAddressOffset); -} - -static inline DAC960_V2_CommandIdentifier_T -DAC960_GEM_ReadCommandIdentifier(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset); -} - -static inline DAC960_V2_CommandStatus_T -DAC960_GEM_ReadCommandStatus(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_GEM_CommandStatusOffset + 2); -} - -static inline bool -DAC960_GEM_ReadErrorStatus(void __iomem *ControllerBaseAddress, - unsigned char *ErrorStatus, - unsigned char *Parameter0, - unsigned char *Parameter1) -{ - DAC960_GEM_ErrorStatusRegister_T ErrorStatusRegister; - ErrorStatusRegister.All = - readl(ControllerBaseAddress + DAC960_GEM_ErrorStatusRegisterReadSetOffset); - if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false; - ErrorStatusRegister.Bits.ErrorStatusPending = false; - *ErrorStatus = ErrorStatusRegister.All; - *Parameter0 = - readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 0); - *Parameter1 = - readb(ControllerBaseAddress + DAC960_GEM_CommandMailboxBusAddressOffset + 1); - writel(0x03000000, ControllerBaseAddress + - DAC960_GEM_ErrorStatusRegisterClearOffset); - return true; -} - -/* - Define the DAC960 BA Series Controller Interface Register Offsets. -*/ - -#define DAC960_BA_RegisterWindowSize 0x80 - -typedef enum -{ - DAC960_BA_InboundDoorBellRegisterOffset = 0x60, - DAC960_BA_OutboundDoorBellRegisterOffset = 0x61, - DAC960_BA_InterruptStatusRegisterOffset = 0x30, - DAC960_BA_InterruptMaskRegisterOffset = 0x34, - DAC960_BA_CommandMailboxBusAddressOffset = 0x50, - DAC960_BA_CommandStatusOffset = 0x58, - DAC960_BA_ErrorStatusRegisterOffset = 0x63 -} -DAC960_BA_RegisterOffsets_T; - - -/* - Define the structure of the DAC960 BA Series Inbound Door Bell Register. -*/ - -typedef union DAC960_BA_InboundDoorBellRegister -{ - unsigned char All; - struct { - bool HardwareMailboxNewCommand:1; /* Bit 0 */ - bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */ - bool GenerateInterrupt:1; /* Bit 2 */ - bool ControllerReset:1; /* Bit 3 */ - bool MemoryMailboxNewCommand:1; /* Bit 4 */ - unsigned char :3; /* Bits 5-7 */ - } Write; - struct { - bool HardwareMailboxEmpty:1; /* Bit 0 */ - bool InitializationNotInProgress:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_BA_InboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 BA Series Outbound Door Bell Register. -*/ - -typedef union DAC960_BA_OutboundDoorBellRegister -{ - unsigned char All; - struct { - bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */ - bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Write; - struct { - bool HardwareMailboxStatusAvailable:1; /* Bit 0 */ - bool MemoryMailboxStatusAvailable:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_BA_OutboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 BA Series Interrupt Mask Register. -*/ - -typedef union DAC960_BA_InterruptMaskRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool DisableInterrupts:1; /* Bit 2 */ - bool DisableInterruptsI2O:1; /* Bit 3 */ - unsigned int :4; /* Bits 4-7 */ - } Bits; -} -DAC960_BA_InterruptMaskRegister_T; - - -/* - Define the structure of the DAC960 BA Series Error Status Register. -*/ - -typedef union DAC960_BA_ErrorStatusRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool ErrorStatusPending:1; /* Bit 2 */ - unsigned int :5; /* Bits 3-7 */ - } Bits; -} -DAC960_BA_ErrorStatusRegister_T; - - -/* - Define inline functions to provide an abstraction for reading and writing the - DAC960 BA Series Controller Interface Registers. -*/ - -static inline -void DAC960_BA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_BA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_BA_GenerateInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.GenerateInterrupt = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_BA_ControllerReset(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.ControllerReset = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_BA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_BA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); - return !InboundDoorBellRegister.Read.HardwareMailboxEmpty; -} - -static inline -bool DAC960_BA_InitializationInProgressP(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_BA_InboundDoorBellRegisterOffset); - return !InboundDoorBellRegister.Read.InitializationNotInProgress; -} - -static inline -void DAC960_BA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_BA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_BA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_BA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable; -} - -static inline -bool DAC960_BA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_BA_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable; -} - -static inline -void DAC960_BA_EnableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0xFF; - InterruptMaskRegister.Bits.DisableInterrupts = false; - InterruptMaskRegister.Bits.DisableInterruptsI2O = true; - writeb(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset); -} - -static inline -void DAC960_BA_DisableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0xFF; - InterruptMaskRegister.Bits.DisableInterrupts = true; - InterruptMaskRegister.Bits.DisableInterruptsI2O = true; - writeb(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset); -} - -static inline -bool DAC960_BA_InterruptsEnabledP(void __iomem *ControllerBaseAddress) -{ - DAC960_BA_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = - readb(ControllerBaseAddress + DAC960_BA_InterruptMaskRegisterOffset); - return !InterruptMaskRegister.Bits.DisableInterrupts; -} - -static inline -void DAC960_BA_WriteCommandMailbox(DAC960_V2_CommandMailbox_T - *MemoryCommandMailbox, - DAC960_V2_CommandMailbox_T - *CommandMailbox) -{ - memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1], - sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int)); - wmb(); - MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0]; - mb(); -} - - -static inline -void DAC960_BA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress, - dma_addr_t CommandMailboxDMA) -{ - dma_addr_writeql(CommandMailboxDMA, - ControllerBaseAddress + - DAC960_BA_CommandMailboxBusAddressOffset); -} - -static inline DAC960_V2_CommandIdentifier_T -DAC960_BA_ReadCommandIdentifier(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset); -} - -static inline DAC960_V2_CommandStatus_T -DAC960_BA_ReadCommandStatus(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_BA_CommandStatusOffset + 2); -} - -static inline bool -DAC960_BA_ReadErrorStatus(void __iomem *ControllerBaseAddress, - unsigned char *ErrorStatus, - unsigned char *Parameter0, - unsigned char *Parameter1) -{ - DAC960_BA_ErrorStatusRegister_T ErrorStatusRegister; - ErrorStatusRegister.All = - readb(ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset); - if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false; - ErrorStatusRegister.Bits.ErrorStatusPending = false; - *ErrorStatus = ErrorStatusRegister.All; - *Parameter0 = - readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 0); - *Parameter1 = - readb(ControllerBaseAddress + DAC960_BA_CommandMailboxBusAddressOffset + 1); - writeb(0xFF, ControllerBaseAddress + DAC960_BA_ErrorStatusRegisterOffset); - return true; -} - - -/* - Define the DAC960 LP Series Controller Interface Register Offsets. -*/ - -#define DAC960_LP_RegisterWindowSize 0x80 - -typedef enum -{ - DAC960_LP_InboundDoorBellRegisterOffset = 0x20, - DAC960_LP_OutboundDoorBellRegisterOffset = 0x2C, - DAC960_LP_InterruptStatusRegisterOffset = 0x30, - DAC960_LP_InterruptMaskRegisterOffset = 0x34, - DAC960_LP_CommandMailboxBusAddressOffset = 0x10, - DAC960_LP_CommandStatusOffset = 0x18, - DAC960_LP_ErrorStatusRegisterOffset = 0x2E -} -DAC960_LP_RegisterOffsets_T; - - -/* - Define the structure of the DAC960 LP Series Inbound Door Bell Register. -*/ - -typedef union DAC960_LP_InboundDoorBellRegister -{ - unsigned char All; - struct { - bool HardwareMailboxNewCommand:1; /* Bit 0 */ - bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */ - bool GenerateInterrupt:1; /* Bit 2 */ - bool ControllerReset:1; /* Bit 3 */ - bool MemoryMailboxNewCommand:1; /* Bit 4 */ - unsigned char :3; /* Bits 5-7 */ - } Write; - struct { - bool HardwareMailboxFull:1; /* Bit 0 */ - bool InitializationInProgress:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_LP_InboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 LP Series Outbound Door Bell Register. -*/ - -typedef union DAC960_LP_OutboundDoorBellRegister -{ - unsigned char All; - struct { - bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */ - bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Write; - struct { - bool HardwareMailboxStatusAvailable:1; /* Bit 0 */ - bool MemoryMailboxStatusAvailable:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_LP_OutboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 LP Series Interrupt Mask Register. -*/ - -typedef union DAC960_LP_InterruptMaskRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool DisableInterrupts:1; /* Bit 2 */ - unsigned int :5; /* Bits 3-7 */ - } Bits; -} -DAC960_LP_InterruptMaskRegister_T; - - -/* - Define the structure of the DAC960 LP Series Error Status Register. -*/ - -typedef union DAC960_LP_ErrorStatusRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool ErrorStatusPending:1; /* Bit 2 */ - unsigned int :5; /* Bits 3-7 */ - } Bits; -} -DAC960_LP_ErrorStatusRegister_T; - - -/* - Define inline functions to provide an abstraction for reading and writing the - DAC960 LP Series Controller Interface Registers. -*/ - -static inline -void DAC960_LP_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LP_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LP_GenerateInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.GenerateInterrupt = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LP_ControllerReset(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.ControllerReset = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LP_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_LP_HardwareMailboxFullP(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); - return InboundDoorBellRegister.Read.HardwareMailboxFull; -} - -static inline -bool DAC960_LP_InitializationInProgressP(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LP_InboundDoorBellRegisterOffset); - return InboundDoorBellRegister.Read.InitializationInProgress; -} - -static inline -void DAC960_LP_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LP_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LP_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_LP_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable; -} - -static inline -bool DAC960_LP_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LP_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable; -} - -static inline -void DAC960_LP_EnableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0xFF; - InterruptMaskRegister.Bits.DisableInterrupts = false; - writeb(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset); -} - -static inline -void DAC960_LP_DisableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0xFF; - InterruptMaskRegister.Bits.DisableInterrupts = true; - writeb(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset); -} - -static inline -bool DAC960_LP_InterruptsEnabledP(void __iomem *ControllerBaseAddress) -{ - DAC960_LP_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = - readb(ControllerBaseAddress + DAC960_LP_InterruptMaskRegisterOffset); - return !InterruptMaskRegister.Bits.DisableInterrupts; -} - -static inline -void DAC960_LP_WriteCommandMailbox(DAC960_V2_CommandMailbox_T - *MemoryCommandMailbox, - DAC960_V2_CommandMailbox_T - *CommandMailbox) -{ - memcpy(&MemoryCommandMailbox->Words[1], &CommandMailbox->Words[1], - sizeof(DAC960_V2_CommandMailbox_T) - sizeof(unsigned int)); - wmb(); - MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0]; - mb(); -} - -static inline -void DAC960_LP_WriteHardwareMailbox(void __iomem *ControllerBaseAddress, - dma_addr_t CommandMailboxDMA) -{ - dma_addr_writeql(CommandMailboxDMA, - ControllerBaseAddress + - DAC960_LP_CommandMailboxBusAddressOffset); -} - -static inline DAC960_V2_CommandIdentifier_T -DAC960_LP_ReadCommandIdentifier(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset); -} - -static inline DAC960_V2_CommandStatus_T -DAC960_LP_ReadCommandStatus(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_LP_CommandStatusOffset + 2); -} - -static inline bool -DAC960_LP_ReadErrorStatus(void __iomem *ControllerBaseAddress, - unsigned char *ErrorStatus, - unsigned char *Parameter0, - unsigned char *Parameter1) -{ - DAC960_LP_ErrorStatusRegister_T ErrorStatusRegister; - ErrorStatusRegister.All = - readb(ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset); - if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false; - ErrorStatusRegister.Bits.ErrorStatusPending = false; - *ErrorStatus = ErrorStatusRegister.All; - *Parameter0 = - readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 0); - *Parameter1 = - readb(ControllerBaseAddress + DAC960_LP_CommandMailboxBusAddressOffset + 1); - writeb(0xFF, ControllerBaseAddress + DAC960_LP_ErrorStatusRegisterOffset); - return true; -} - - -/* - Define the DAC960 LA Series Controller Interface Register Offsets. -*/ - -#define DAC960_LA_RegisterWindowSize 0x80 - -typedef enum -{ - DAC960_LA_InboundDoorBellRegisterOffset = 0x60, - DAC960_LA_OutboundDoorBellRegisterOffset = 0x61, - DAC960_LA_InterruptMaskRegisterOffset = 0x34, - DAC960_LA_CommandOpcodeRegisterOffset = 0x50, - DAC960_LA_CommandIdentifierRegisterOffset = 0x51, - DAC960_LA_MailboxRegister2Offset = 0x52, - DAC960_LA_MailboxRegister3Offset = 0x53, - DAC960_LA_MailboxRegister4Offset = 0x54, - DAC960_LA_MailboxRegister5Offset = 0x55, - DAC960_LA_MailboxRegister6Offset = 0x56, - DAC960_LA_MailboxRegister7Offset = 0x57, - DAC960_LA_MailboxRegister8Offset = 0x58, - DAC960_LA_MailboxRegister9Offset = 0x59, - DAC960_LA_MailboxRegister10Offset = 0x5A, - DAC960_LA_MailboxRegister11Offset = 0x5B, - DAC960_LA_MailboxRegister12Offset = 0x5C, - DAC960_LA_StatusCommandIdentifierRegOffset = 0x5D, - DAC960_LA_StatusRegisterOffset = 0x5E, - DAC960_LA_ErrorStatusRegisterOffset = 0x63 -} -DAC960_LA_RegisterOffsets_T; - - -/* - Define the structure of the DAC960 LA Series Inbound Door Bell Register. -*/ - -typedef union DAC960_LA_InboundDoorBellRegister -{ - unsigned char All; - struct { - bool HardwareMailboxNewCommand:1; /* Bit 0 */ - bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */ - bool GenerateInterrupt:1; /* Bit 2 */ - bool ControllerReset:1; /* Bit 3 */ - bool MemoryMailboxNewCommand:1; /* Bit 4 */ - unsigned char :3; /* Bits 5-7 */ - } Write; - struct { - bool HardwareMailboxEmpty:1; /* Bit 0 */ - bool InitializationNotInProgress:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_LA_InboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 LA Series Outbound Door Bell Register. -*/ - -typedef union DAC960_LA_OutboundDoorBellRegister -{ - unsigned char All; - struct { - bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */ - bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Write; - struct { - bool HardwareMailboxStatusAvailable:1; /* Bit 0 */ - bool MemoryMailboxStatusAvailable:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_LA_OutboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 LA Series Interrupt Mask Register. -*/ - -typedef union DAC960_LA_InterruptMaskRegister -{ - unsigned char All; - struct { - unsigned char :2; /* Bits 0-1 */ - bool DisableInterrupts:1; /* Bit 2 */ - unsigned char :5; /* Bits 3-7 */ - } Bits; -} -DAC960_LA_InterruptMaskRegister_T; - - -/* - Define the structure of the DAC960 LA Series Error Status Register. -*/ - -typedef union DAC960_LA_ErrorStatusRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool ErrorStatusPending:1; /* Bit 2 */ - unsigned int :5; /* Bits 3-7 */ - } Bits; -} -DAC960_LA_ErrorStatusRegister_T; - - -/* - Define inline functions to provide an abstraction for reading and writing the - DAC960 LA Series Controller Interface Registers. -*/ - -static inline -void DAC960_LA_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LA_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LA_GenerateInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.GenerateInterrupt = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LA_ControllerReset(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.ControllerReset = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LA_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_LA_HardwareMailboxFullP(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); - return !InboundDoorBellRegister.Read.HardwareMailboxEmpty; -} - -static inline -bool DAC960_LA_InitializationInProgressP(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LA_InboundDoorBellRegisterOffset); - return !InboundDoorBellRegister.Read.InitializationNotInProgress; -} - -static inline -void DAC960_LA_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LA_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_LA_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_LA_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable; -} - -static inline -bool DAC960_LA_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_LA_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable; -} - -static inline -void DAC960_LA_EnableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0xFF; - InterruptMaskRegister.Bits.DisableInterrupts = false; - writeb(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset); -} - -static inline -void DAC960_LA_DisableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0xFF; - InterruptMaskRegister.Bits.DisableInterrupts = true; - writeb(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset); -} - -static inline -bool DAC960_LA_InterruptsEnabledP(void __iomem *ControllerBaseAddress) -{ - DAC960_LA_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = - readb(ControllerBaseAddress + DAC960_LA_InterruptMaskRegisterOffset); - return !InterruptMaskRegister.Bits.DisableInterrupts; -} - -static inline -void DAC960_LA_WriteCommandMailbox(DAC960_V1_CommandMailbox_T - *MemoryCommandMailbox, - DAC960_V1_CommandMailbox_T - *CommandMailbox) -{ - MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1]; - MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2]; - MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3]; - wmb(); - MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0]; - mb(); -} - -static inline -void DAC960_LA_WriteHardwareMailbox(void __iomem *ControllerBaseAddress, - DAC960_V1_CommandMailbox_T *CommandMailbox) -{ - writel(CommandMailbox->Words[0], - ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset); - writel(CommandMailbox->Words[1], - ControllerBaseAddress + DAC960_LA_MailboxRegister4Offset); - writel(CommandMailbox->Words[2], - ControllerBaseAddress + DAC960_LA_MailboxRegister8Offset); - writeb(CommandMailbox->Bytes[12], - ControllerBaseAddress + DAC960_LA_MailboxRegister12Offset); -} - -static inline DAC960_V1_CommandIdentifier_T -DAC960_LA_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress) -{ - return readb(ControllerBaseAddress - + DAC960_LA_StatusCommandIdentifierRegOffset); -} - -static inline DAC960_V1_CommandStatus_T -DAC960_LA_ReadStatusRegister(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_LA_StatusRegisterOffset); -} - -static inline bool -DAC960_LA_ReadErrorStatus(void __iomem *ControllerBaseAddress, - unsigned char *ErrorStatus, - unsigned char *Parameter0, - unsigned char *Parameter1) -{ - DAC960_LA_ErrorStatusRegister_T ErrorStatusRegister; - ErrorStatusRegister.All = - readb(ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset); - if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false; - ErrorStatusRegister.Bits.ErrorStatusPending = false; - *ErrorStatus = ErrorStatusRegister.All; - *Parameter0 = - readb(ControllerBaseAddress + DAC960_LA_CommandOpcodeRegisterOffset); - *Parameter1 = - readb(ControllerBaseAddress + DAC960_LA_CommandIdentifierRegisterOffset); - writeb(0xFF, ControllerBaseAddress + DAC960_LA_ErrorStatusRegisterOffset); - return true; -} - -/* - Define the DAC960 PG Series Controller Interface Register Offsets. -*/ - -#define DAC960_PG_RegisterWindowSize 0x2000 - -typedef enum -{ - DAC960_PG_InboundDoorBellRegisterOffset = 0x0020, - DAC960_PG_OutboundDoorBellRegisterOffset = 0x002C, - DAC960_PG_InterruptMaskRegisterOffset = 0x0034, - DAC960_PG_CommandOpcodeRegisterOffset = 0x1000, - DAC960_PG_CommandIdentifierRegisterOffset = 0x1001, - DAC960_PG_MailboxRegister2Offset = 0x1002, - DAC960_PG_MailboxRegister3Offset = 0x1003, - DAC960_PG_MailboxRegister4Offset = 0x1004, - DAC960_PG_MailboxRegister5Offset = 0x1005, - DAC960_PG_MailboxRegister6Offset = 0x1006, - DAC960_PG_MailboxRegister7Offset = 0x1007, - DAC960_PG_MailboxRegister8Offset = 0x1008, - DAC960_PG_MailboxRegister9Offset = 0x1009, - DAC960_PG_MailboxRegister10Offset = 0x100A, - DAC960_PG_MailboxRegister11Offset = 0x100B, - DAC960_PG_MailboxRegister12Offset = 0x100C, - DAC960_PG_StatusCommandIdentifierRegOffset = 0x1018, - DAC960_PG_StatusRegisterOffset = 0x101A, - DAC960_PG_ErrorStatusRegisterOffset = 0x103F -} -DAC960_PG_RegisterOffsets_T; - - -/* - Define the structure of the DAC960 PG Series Inbound Door Bell Register. -*/ - -typedef union DAC960_PG_InboundDoorBellRegister -{ - unsigned int All; - struct { - bool HardwareMailboxNewCommand:1; /* Bit 0 */ - bool AcknowledgeHardwareMailboxStatus:1; /* Bit 1 */ - bool GenerateInterrupt:1; /* Bit 2 */ - bool ControllerReset:1; /* Bit 3 */ - bool MemoryMailboxNewCommand:1; /* Bit 4 */ - unsigned int :27; /* Bits 5-31 */ - } Write; - struct { - bool HardwareMailboxFull:1; /* Bit 0 */ - bool InitializationInProgress:1; /* Bit 1 */ - unsigned int :30; /* Bits 2-31 */ - } Read; -} -DAC960_PG_InboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 PG Series Outbound Door Bell Register. -*/ - -typedef union DAC960_PG_OutboundDoorBellRegister -{ - unsigned int All; - struct { - bool AcknowledgeHardwareMailboxInterrupt:1; /* Bit 0 */ - bool AcknowledgeMemoryMailboxInterrupt:1; /* Bit 1 */ - unsigned int :30; /* Bits 2-31 */ - } Write; - struct { - bool HardwareMailboxStatusAvailable:1; /* Bit 0 */ - bool MemoryMailboxStatusAvailable:1; /* Bit 1 */ - unsigned int :30; /* Bits 2-31 */ - } Read; -} -DAC960_PG_OutboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 PG Series Interrupt Mask Register. -*/ - -typedef union DAC960_PG_InterruptMaskRegister -{ - unsigned int All; - struct { - unsigned int MessageUnitInterruptMask1:2; /* Bits 0-1 */ - bool DisableInterrupts:1; /* Bit 2 */ - unsigned int MessageUnitInterruptMask2:5; /* Bits 3-7 */ - unsigned int Reserved0:24; /* Bits 8-31 */ - } Bits; -} -DAC960_PG_InterruptMaskRegister_T; - - -/* - Define the structure of the DAC960 PG Series Error Status Register. -*/ - -typedef union DAC960_PG_ErrorStatusRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool ErrorStatusPending:1; /* Bit 2 */ - unsigned int :5; /* Bits 3-7 */ - } Bits; -} -DAC960_PG_ErrorStatusRegister_T; - - -/* - Define inline functions to provide an abstraction for reading and writing the - DAC960 PG Series Controller Interface Registers. -*/ - -static inline -void DAC960_PG_HardwareMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.HardwareMailboxNewCommand = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PG_AcknowledgeHardwareMailboxStatus(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.AcknowledgeHardwareMailboxStatus = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PG_GenerateInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.GenerateInterrupt = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PG_ControllerReset(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.ControllerReset = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PG_MemoryMailboxNewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.MemoryMailboxNewCommand = true; - writel(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_PG_HardwareMailboxFullP(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); - return InboundDoorBellRegister.Read.HardwareMailboxFull; -} - -static inline -bool DAC960_PG_InitializationInProgressP(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readl(ControllerBaseAddress + DAC960_PG_InboundDoorBellRegisterOffset); - return InboundDoorBellRegister.Read.InitializationInProgress; -} - -static inline -void DAC960_PG_AcknowledgeHardwareMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - writel(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PG_AcknowledgeMemoryMailboxInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writel(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PG_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeHardwareMailboxInterrupt = true; - OutboundDoorBellRegister.Write.AcknowledgeMemoryMailboxInterrupt = true; - writel(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_PG_HardwareMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.HardwareMailboxStatusAvailable; -} - -static inline -bool DAC960_PG_MemoryMailboxStatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readl(ControllerBaseAddress + DAC960_PG_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.MemoryMailboxStatusAvailable; -} - -static inline -void DAC960_PG_EnableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0; - InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3; - InterruptMaskRegister.Bits.DisableInterrupts = false; - InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F; - writel(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset); -} - -static inline -void DAC960_PG_DisableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = 0; - InterruptMaskRegister.Bits.MessageUnitInterruptMask1 = 0x3; - InterruptMaskRegister.Bits.DisableInterrupts = true; - InterruptMaskRegister.Bits.MessageUnitInterruptMask2 = 0x1F; - writel(InterruptMaskRegister.All, - ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset); -} - -static inline -bool DAC960_PG_InterruptsEnabledP(void __iomem *ControllerBaseAddress) -{ - DAC960_PG_InterruptMaskRegister_T InterruptMaskRegister; - InterruptMaskRegister.All = - readl(ControllerBaseAddress + DAC960_PG_InterruptMaskRegisterOffset); - return !InterruptMaskRegister.Bits.DisableInterrupts; -} - -static inline -void DAC960_PG_WriteCommandMailbox(DAC960_V1_CommandMailbox_T - *MemoryCommandMailbox, - DAC960_V1_CommandMailbox_T - *CommandMailbox) -{ - MemoryCommandMailbox->Words[1] = CommandMailbox->Words[1]; - MemoryCommandMailbox->Words[2] = CommandMailbox->Words[2]; - MemoryCommandMailbox->Words[3] = CommandMailbox->Words[3]; - wmb(); - MemoryCommandMailbox->Words[0] = CommandMailbox->Words[0]; - mb(); -} - -static inline -void DAC960_PG_WriteHardwareMailbox(void __iomem *ControllerBaseAddress, - DAC960_V1_CommandMailbox_T *CommandMailbox) -{ - writel(CommandMailbox->Words[0], - ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset); - writel(CommandMailbox->Words[1], - ControllerBaseAddress + DAC960_PG_MailboxRegister4Offset); - writel(CommandMailbox->Words[2], - ControllerBaseAddress + DAC960_PG_MailboxRegister8Offset); - writeb(CommandMailbox->Bytes[12], - ControllerBaseAddress + DAC960_PG_MailboxRegister12Offset); -} - -static inline DAC960_V1_CommandIdentifier_T -DAC960_PG_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress) -{ - return readb(ControllerBaseAddress - + DAC960_PG_StatusCommandIdentifierRegOffset); -} - -static inline DAC960_V1_CommandStatus_T -DAC960_PG_ReadStatusRegister(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_PG_StatusRegisterOffset); -} - -static inline bool -DAC960_PG_ReadErrorStatus(void __iomem *ControllerBaseAddress, - unsigned char *ErrorStatus, - unsigned char *Parameter0, - unsigned char *Parameter1) -{ - DAC960_PG_ErrorStatusRegister_T ErrorStatusRegister; - ErrorStatusRegister.All = - readb(ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset); - if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false; - ErrorStatusRegister.Bits.ErrorStatusPending = false; - *ErrorStatus = ErrorStatusRegister.All; - *Parameter0 = - readb(ControllerBaseAddress + DAC960_PG_CommandOpcodeRegisterOffset); - *Parameter1 = - readb(ControllerBaseAddress + DAC960_PG_CommandIdentifierRegisterOffset); - writeb(0, ControllerBaseAddress + DAC960_PG_ErrorStatusRegisterOffset); - return true; -} - -/* - Define the DAC960 PD Series Controller Interface Register Offsets. -*/ - -#define DAC960_PD_RegisterWindowSize 0x80 - -typedef enum -{ - DAC960_PD_CommandOpcodeRegisterOffset = 0x00, - DAC960_PD_CommandIdentifierRegisterOffset = 0x01, - DAC960_PD_MailboxRegister2Offset = 0x02, - DAC960_PD_MailboxRegister3Offset = 0x03, - DAC960_PD_MailboxRegister4Offset = 0x04, - DAC960_PD_MailboxRegister5Offset = 0x05, - DAC960_PD_MailboxRegister6Offset = 0x06, - DAC960_PD_MailboxRegister7Offset = 0x07, - DAC960_PD_MailboxRegister8Offset = 0x08, - DAC960_PD_MailboxRegister9Offset = 0x09, - DAC960_PD_MailboxRegister10Offset = 0x0A, - DAC960_PD_MailboxRegister11Offset = 0x0B, - DAC960_PD_MailboxRegister12Offset = 0x0C, - DAC960_PD_StatusCommandIdentifierRegOffset = 0x0D, - DAC960_PD_StatusRegisterOffset = 0x0E, - DAC960_PD_ErrorStatusRegisterOffset = 0x3F, - DAC960_PD_InboundDoorBellRegisterOffset = 0x40, - DAC960_PD_OutboundDoorBellRegisterOffset = 0x41, - DAC960_PD_InterruptEnableRegisterOffset = 0x43 -} -DAC960_PD_RegisterOffsets_T; - - -/* - Define the structure of the DAC960 PD Series Inbound Door Bell Register. -*/ - -typedef union DAC960_PD_InboundDoorBellRegister -{ - unsigned char All; - struct { - bool NewCommand:1; /* Bit 0 */ - bool AcknowledgeStatus:1; /* Bit 1 */ - bool GenerateInterrupt:1; /* Bit 2 */ - bool ControllerReset:1; /* Bit 3 */ - unsigned char :4; /* Bits 4-7 */ - } Write; - struct { - bool MailboxFull:1; /* Bit 0 */ - bool InitializationInProgress:1; /* Bit 1 */ - unsigned char :6; /* Bits 2-7 */ - } Read; -} -DAC960_PD_InboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 PD Series Outbound Door Bell Register. -*/ - -typedef union DAC960_PD_OutboundDoorBellRegister -{ - unsigned char All; - struct { - bool AcknowledgeInterrupt:1; /* Bit 0 */ - unsigned char :7; /* Bits 1-7 */ - } Write; - struct { - bool StatusAvailable:1; /* Bit 0 */ - unsigned char :7; /* Bits 1-7 */ - } Read; -} -DAC960_PD_OutboundDoorBellRegister_T; - - -/* - Define the structure of the DAC960 PD Series Interrupt Enable Register. -*/ - -typedef union DAC960_PD_InterruptEnableRegister -{ - unsigned char All; - struct { - bool EnableInterrupts:1; /* Bit 0 */ - unsigned char :7; /* Bits 1-7 */ - } Bits; -} -DAC960_PD_InterruptEnableRegister_T; - - -/* - Define the structure of the DAC960 PD Series Error Status Register. -*/ - -typedef union DAC960_PD_ErrorStatusRegister -{ - unsigned char All; - struct { - unsigned int :2; /* Bits 0-1 */ - bool ErrorStatusPending:1; /* Bit 2 */ - unsigned int :5; /* Bits 3-7 */ - } Bits; -} -DAC960_PD_ErrorStatusRegister_T; - - -/* - Define inline functions to provide an abstraction for reading and writing the - DAC960 PD Series Controller Interface Registers. -*/ - -static inline -void DAC960_PD_NewCommand(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.NewCommand = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PD_AcknowledgeStatus(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.AcknowledgeStatus = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PD_GenerateInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.GenerateInterrupt = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset); -} - -static inline -void DAC960_PD_ControllerReset(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = 0; - InboundDoorBellRegister.Write.ControllerReset = true; - writeb(InboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_PD_MailboxFullP(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset); - return InboundDoorBellRegister.Read.MailboxFull; -} - -static inline -bool DAC960_PD_InitializationInProgressP(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InboundDoorBellRegister_T InboundDoorBellRegister; - InboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_PD_InboundDoorBellRegisterOffset); - return InboundDoorBellRegister.Read.InitializationInProgress; -} - -static inline -void DAC960_PD_AcknowledgeInterrupt(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = 0; - OutboundDoorBellRegister.Write.AcknowledgeInterrupt = true; - writeb(OutboundDoorBellRegister.All, - ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset); -} - -static inline -bool DAC960_PD_StatusAvailableP(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_OutboundDoorBellRegister_T OutboundDoorBellRegister; - OutboundDoorBellRegister.All = - readb(ControllerBaseAddress + DAC960_PD_OutboundDoorBellRegisterOffset); - return OutboundDoorBellRegister.Read.StatusAvailable; -} - -static inline -void DAC960_PD_EnableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister; - InterruptEnableRegister.All = 0; - InterruptEnableRegister.Bits.EnableInterrupts = true; - writeb(InterruptEnableRegister.All, - ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset); -} - -static inline -void DAC960_PD_DisableInterrupts(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister; - InterruptEnableRegister.All = 0; - InterruptEnableRegister.Bits.EnableInterrupts = false; - writeb(InterruptEnableRegister.All, - ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset); -} - -static inline -bool DAC960_PD_InterruptsEnabledP(void __iomem *ControllerBaseAddress) -{ - DAC960_PD_InterruptEnableRegister_T InterruptEnableRegister; - InterruptEnableRegister.All = - readb(ControllerBaseAddress + DAC960_PD_InterruptEnableRegisterOffset); - return InterruptEnableRegister.Bits.EnableInterrupts; -} - -static inline -void DAC960_PD_WriteCommandMailbox(void __iomem *ControllerBaseAddress, - DAC960_V1_CommandMailbox_T *CommandMailbox) -{ - writel(CommandMailbox->Words[0], - ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset); - writel(CommandMailbox->Words[1], - ControllerBaseAddress + DAC960_PD_MailboxRegister4Offset); - writel(CommandMailbox->Words[2], - ControllerBaseAddress + DAC960_PD_MailboxRegister8Offset); - writeb(CommandMailbox->Bytes[12], - ControllerBaseAddress + DAC960_PD_MailboxRegister12Offset); -} - -static inline DAC960_V1_CommandIdentifier_T -DAC960_PD_ReadStatusCommandIdentifier(void __iomem *ControllerBaseAddress) -{ - return readb(ControllerBaseAddress - + DAC960_PD_StatusCommandIdentifierRegOffset); -} - -static inline DAC960_V1_CommandStatus_T -DAC960_PD_ReadStatusRegister(void __iomem *ControllerBaseAddress) -{ - return readw(ControllerBaseAddress + DAC960_PD_StatusRegisterOffset); -} - -static inline bool -DAC960_PD_ReadErrorStatus(void __iomem *ControllerBaseAddress, - unsigned char *ErrorStatus, - unsigned char *Parameter0, - unsigned char *Parameter1) -{ - DAC960_PD_ErrorStatusRegister_T ErrorStatusRegister; - ErrorStatusRegister.All = - readb(ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset); - if (!ErrorStatusRegister.Bits.ErrorStatusPending) return false; - ErrorStatusRegister.Bits.ErrorStatusPending = false; - *ErrorStatus = ErrorStatusRegister.All; - *Parameter0 = - readb(ControllerBaseAddress + DAC960_PD_CommandOpcodeRegisterOffset); - *Parameter1 = - readb(ControllerBaseAddress + DAC960_PD_CommandIdentifierRegisterOffset); - writeb(0, ControllerBaseAddress + DAC960_PD_ErrorStatusRegisterOffset); - return true; -} - -static inline void DAC960_P_To_PD_TranslateEnquiry(void *Enquiry) -{ - memcpy(Enquiry + 132, Enquiry + 36, 64); - memset(Enquiry + 36, 0, 96); -} - -static inline void DAC960_P_To_PD_TranslateDeviceState(void *DeviceState) -{ - memcpy(DeviceState + 2, DeviceState + 3, 1); - memmove(DeviceState + 4, DeviceState + 5, 2); - memmove(DeviceState + 6, DeviceState + 8, 4); -} - -static inline -void DAC960_PD_To_P_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T - *CommandMailbox) -{ - int LogicalDriveNumber = CommandMailbox->Type5.LD.LogicalDriveNumber; - CommandMailbox->Bytes[3] &= 0x7; - CommandMailbox->Bytes[3] |= CommandMailbox->Bytes[7] << 6; - CommandMailbox->Bytes[7] = LogicalDriveNumber; -} - -static inline -void DAC960_P_To_PD_TranslateReadWriteCommand(DAC960_V1_CommandMailbox_T - *CommandMailbox) -{ - int LogicalDriveNumber = CommandMailbox->Bytes[7]; - CommandMailbox->Bytes[7] = CommandMailbox->Bytes[3] >> 6; - CommandMailbox->Bytes[3] &= 0x7; - CommandMailbox->Bytes[3] |= LogicalDriveNumber << 3; -} - - -/* - Define prototypes for the forward referenced DAC960 Driver Internal Functions. -*/ - -static void DAC960_FinalizeController(DAC960_Controller_T *); -static void DAC960_V1_QueueReadWriteCommand(DAC960_Command_T *); -static void DAC960_V2_QueueReadWriteCommand(DAC960_Command_T *); -static void DAC960_RequestFunction(struct request_queue *); -static irqreturn_t DAC960_BA_InterruptHandler(int, void *); -static irqreturn_t DAC960_LP_InterruptHandler(int, void *); -static irqreturn_t DAC960_LA_InterruptHandler(int, void *); -static irqreturn_t DAC960_PG_InterruptHandler(int, void *); -static irqreturn_t DAC960_PD_InterruptHandler(int, void *); -static irqreturn_t DAC960_P_InterruptHandler(int, void *); -static void DAC960_V1_QueueMonitoringCommand(DAC960_Command_T *); -static void DAC960_V2_QueueMonitoringCommand(DAC960_Command_T *); -static void DAC960_MonitoringTimerFunction(struct timer_list *); -static void DAC960_Message(DAC960_MessageLevel_T, unsigned char *, - DAC960_Controller_T *, ...); -static void DAC960_CreateProcEntries(DAC960_Controller_T *); -static void DAC960_DestroyProcEntries(DAC960_Controller_T *); - -#endif /* DAC960_DriverVersion */ diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index d4913516823f..c1747f2953bc 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -121,18 +121,6 @@ source "drivers/block/mtip32xx/Kconfig" source "drivers/block/zram/Kconfig" -config BLK_DEV_DAC960 - tristate "Mylex DAC960/DAC1100 PCI RAID Controller support" - depends on PCI - help - This driver adds support for the Mylex DAC960, AcceleRAID, and - eXtremeRAID PCI RAID controllers. See the file - for further information - about this driver. - - To compile this driver as a module, choose M here: the - module will be called DAC960. - config BLK_DEV_UMEM tristate "Micro Memory MM5415 Battery Backed RAM support" depends on PCI diff --git a/drivers/block/Makefile b/drivers/block/Makefile index 8566b188368b..a53cc1e3a2d3 100644 --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_ATARI_FLOPPY) += ataflop.o obj-$(CONFIG_AMIGA_Z2RAM) += z2ram.o obj-$(CONFIG_BLK_DEV_RAM) += brd.o obj-$(CONFIG_BLK_DEV_LOOP) += loop.o -obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o obj-$(CONFIG_XILINX_SYSACE) += xsysace.o obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o obj-$(CONFIG_SUNVDC) += sunvdc.o -- 2.16.4