From mboxrd@z Thu Jan  1 00:00:00 1970
From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Date: Fri, 12 Oct 2018 20:14:52 +0530
Subject: [U-Boot] [PATCH v4 25/27] armv8: ls1012aqds: fix secure boot
	compilation
In-Reply-To: <20181012144454.3707-1-rajesh.bhagat@nxp.com>
References: <20181012144454.3707-1-rajesh.bhagat@nxp.com>
Message-ID: <20181012144454.3707-26-rajesh.bhagat@nxp.com>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

Includes environment.h file in ls1012aqds.c Also, enables
pfe validation

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
---
Change in v4: 
 - Changed order to solve compilation error

Change in v3: None
Change in v2: None


 board/freescale/ls1012aqds/Kconfig      | 10 ++++++++++
 board/freescale/ls1012aqds/ls1012aqds.c |  6 ++++++
 include/configs/ls1012aqds.h            |  1 +
 3 files changed, 17 insertions(+)

diff --git a/board/freescale/ls1012aqds/Kconfig b/board/freescale/ls1012aqds/Kconfig
index b702fb2740..8844557aae 100644
--- a/board/freescale/ls1012aqds/Kconfig
+++ b/board/freescale/ls1012aqds/Kconfig
@@ -16,6 +16,12 @@ config SYS_LS_PPA_FW_ADDR
         hex "PPA Firmware Addr"
         default 0x40400000
 
+if CHAIN_OF_TRUST
+config SYS_LS_PPA_ESBC_ADDR
+	hex "PPA Firmware HDR Addr"
+	default 0x40680000
+endif
+
 if FSL_PFE
 
 config BOARD_SPECIFIC_OPTIONS # dummy
@@ -33,6 +39,10 @@ config SYS_LS_PFE_FW_ADDR
 	hex "Flash address of PFE firmware"
 	default 0x40a00000
 
+config SYS_LS_PFE_ESBC_ADDR
+	hex "PFE Firmware HDR Addr"
+	default 0x40700000
+
 config DDR_PFE_PHYS_BASEADDR
 	hex "PFE DDR physical base address"
 	default 0x03800000
diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
index 7102237756..3a1c2351c4 100644
--- a/board/freescale/ls1012aqds/ls1012aqds.c
+++ b/board/freescale/ls1012aqds/ls1012aqds.c
@@ -18,12 +18,14 @@
 #include <ahci.h>
 #include <hwconfig.h>
 #include <mmc.h>
+#include <environment.h>
 #include <scsi.h>
 #include <fm_eth.h>
 #include <fsl_esdhc.h>
 #include <fsl_mmdc.h>
 #include <spl.h>
 #include <netdev.h>
+#include <fsl_sec.h>
 #include "../common/qixis.h"
 #include "ls1012aqds_qixis.h"
 #include "ls1012aqds_pfe.h"
@@ -121,6 +123,10 @@ int board_init(void)
 	gd->env_addr = (ulong)&default_environment[0];
 #endif
 
+#ifdef CONFIG_FSL_CAAM
+	sec_init();
+#endif
+
 #ifdef CONFIG_FSL_LS_PPA
 	ppa_init();
 #endif
diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
index c5bdea6798..c76bfdc8f8 100644
--- a/include/configs/ls1012aqds.h
+++ b/include/configs/ls1012aqds.h
@@ -117,4 +117,5 @@
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
+#include <asm/fsl_secure_boot.h>
 #endif /* __LS1012AQDS_H__ */
-- 
2.17.1