From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <MAILER-DAEMON>
From: Martin Kelly <martin@martingkelly.com>
To: linux-iio@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
	Martin Kelly <martin@martingkelly.com>
Subject: [PATCH v2] iio: st_sensors: miscellaneous cleanup
Date: Mon, 15 Oct 2018 20:27:09 -0700
Message-Id: <20181016032709.3745-1-martin@martingkelly.com>
List-ID: <linux-iio@vger.kernel.org>

From: Martin Kelly <martin@martingkelly.com>

Miscellaneous cleanup to fix minor consistency, grammar, and spelling
issues.

Signed-off-by: Martin Kelly <martin@martingkelly.com>
---
v2:
- Explicit return, eliminating goto st_sensors_match_odr_error.

 drivers/iio/common/st_sensors/st_sensors_core.c    | 3 +--
 drivers/iio/common/st_sensors/st_sensors_trigger.c | 4 ++--
 drivers/iio/magnetometer/st_magn_core.c            | 6 +++---
 3 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index 26fbd1bd9413..e50c975250e9 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -133,7 +133,7 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,

 	for (i = 0; i < ST_SENSORS_FULLSCALE_AVL_MAX; i++) {
 		if (sensor_settings->fs.fs_avl[i].num == 0)
-			goto st_sensors_match_odr_error;
+			return ret;

 		if (sensor_settings->fs.fs_avl[i].num == fs) {
 			*index_fs_avl = i;
@@ -142,7 +142,6 @@ static int st_sensors_match_fs(struct st_sensor_settings *sensor_settings,
 		}
 	}

-st_sensors_match_odr_error:
 	return ret;
 }

diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index fdcc5a891958..224596b0e189 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -104,7 +104,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p)
 		return IRQ_HANDLED;

 	/*
-	 * If we are using egde IRQs, new samples arrived while processing
+	 * If we are using edge IRQs, new samples arrived while processing
 	 * the IRQ and those may be missed unless we pick them here, so poll
 	 * again. If the sensor delivery frequency is very high, this thread
 	 * turns into a polled loop handler.
@@ -148,7 +148,7 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 		if (!sdata->sensor_settings->drdy_irq.addr_ihl) {
 			dev_err(&indio_dev->dev,
 				"falling/low specified for IRQ "
-				"but hardware only support rising/high: "
+				"but hardware supports only rising/high: "
 				"will request rising/high\n");
 			if (irq_trig == IRQF_TRIGGER_FALLING)
 				irq_trig = IRQF_TRIGGER_RISING;
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 72f6d1335a04..880c11c7f1cb 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -29,9 +29,9 @@
 #define ST_MAGN_NUMBER_DATA_CHANNELS		3

 /* DEFAULT VALUE FOR SENSORS */
-#define ST_MAGN_DEFAULT_OUT_X_H_ADDR		0X03
-#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR		0X07
-#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR		0X05
+#define ST_MAGN_DEFAULT_OUT_X_H_ADDR		0x03
+#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR		0x07
+#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR		0x05

 /* FULLSCALE */
 #define ST_MAGN_FS_AVL_1300MG			1300
--
2.11.0