All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marcel Ziswiler <marcel@ziswiler.com>
To: devicetree@vger.kernel.org, linux-tegra@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Russell King - ARM Linux <linux@armlinux.org.uk>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	Jonathan Hunter <jonathanh@nvidia.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Subject: [PATCH v3 7/7] ARM: tegra: apalis_t30: further regulator clean-up
Date: Thu, 18 Oct 2018 13:14:11 +0200	[thread overview]
Message-ID: <20181018111411.26623-8-marcel@ziswiler.com> (raw)
In-Reply-To: <20181018111411.26623-1-marcel@ziswiler.com>

From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

Rename label vdd2_reg to reg_1v05.
Rename label ldo6_reg to reg_1v05_avdd_plle.
Drop unused labels.
Rename regulator tps62362-vout to +V1.2_VDD_CORE.
Reorder TPS65911 properties.
Rename +V1.05 to +V1.05_AVDD_PLLE.
Add ti,en-ck32k-xtal.
Specify TPS62362 vin-supply.
Drop spurious newline in TPS62362 properties.
Rename vddio_sdmmc_1v8_reg to reg_1v8_vddio_sdmmc3.
Rename +V1.05 to +V1.05_AVDD_PLLE.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>

---

Changes in v3:
- Dropped ASoC patches in favour of sending them as a separate series.

Changes in v2:
- Dropped "[PATCH v1 3/8] ARM: tegra: apalis/colibri_t30: fix hdmi
  regulator" as suggested by Russell et. al.
- Added 2 new patches improving/fixing audio on Apalis TK1.

Changes in v1: None

 arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts |  2 +-
 arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi     | 70 +++++++++++---------------
 arch/arm/boot/dts/tegra30-apalis.dtsi          | 68 +++++++++++--------------
 3 files changed, 58 insertions(+), 82 deletions(-)

diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index e29dca92ba0a..34c9fcd9198f 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -251,7 +251,7 @@
 		states = <1800000 0x0
 			  3300000 0x1>;
 		startup-delay-us = <100000>;
-		vin-supply = <&vddio_sdmmc_1v8_reg>;
+		vin-supply = <&reg_1v8_vddio_sdmmc3>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
index bc714032d771..fcfd3fddfda9 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1.dtsi
@@ -13,14 +13,14 @@
 
 	pcie@3000 {
 		status = "okay";
-		avdd-pexa-supply = <&vdd2_reg>;
-		avdd-pexb-supply = <&vdd2_reg>;
-		avdd-pex-pll-supply = <&vdd2_reg>;
-		avdd-plle-supply = <&ldo6_reg>;
+		avdd-pexa-supply = <&reg_1v05>;
+		avdd-pexb-supply = <&reg_1v05>;
+		avdd-pex-pll-supply = <&reg_1v05>;
+		avdd-plle-supply = <&reg_1v05>;
 		hvdd-pex-supply = <&reg_module_3v3>;
 		vddio-pex-ctl-supply = <&reg_module_3v3>;
-		vdd-pexa-supply = <&vdd2_reg>;
-		vdd-pexb-supply = <&vdd2_reg>;
+		vdd-pexa-supply = <&reg_1v05>;
+		vdd-pexb-supply = <&reg_1v05>;
 
 		/* Apalis type specific */
 		pci@1,0 {
@@ -864,16 +864,13 @@
 		pmic: pmic@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
-
+			#gpio-cells = <2>;
+			gpio-controller;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-
+			ti,en-ck32k-xtal;
 			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
 			vcc1-supply = <&reg_module_3v3>;
 			vcc2-supply = <&reg_module_3v3>;
 			vcc3-supply = <&reg_1v8_vio>;
@@ -884,38 +881,38 @@
 			vccio-supply = <&reg_module_3v3>;
 
 			regulators {
-				vdd1_reg: vdd1 {
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vdd1 {
 					regulator-name = "+V1.35_VDDIO_DDR";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 				};
 
-				vdd2_reg: vdd2 {
+				reg_1v05: vdd2 {
 					regulator-name = "+V1.05";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
-				vddctrl_reg: vddctrl {
+				vddctrl {
 					regulator-name = "+V1.0_VDD_CPU";
 					regulator-min-microvolt = <1150000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 				};
 
-				reg_1v8_vio: vio {
-					regulator-name = "+V1.8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
 				/*
 				 * 1.8 volt +VDDIO_SDMMC3 in case EN_+3.3_SDMMC3
 				 * is off
 				 */
-				vddio_sdmmc_1v8_reg: ldo1 {
+				reg_1v8_vddio_sdmmc3: ldo1 {
 					regulator-name = "+VDDIO_SDMMC3_1V8";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
@@ -927,20 +924,20 @@
 				 * +V3.3_AUDIO_AVDD_S, +V3.3
 				 * see also +V3.3 fixed supply
 				 */
-				ldo2_reg: ldo2 {
+				ldo2 {
 					regulator-name = "EN_+V3.3";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				ldo3_reg: ldo3 {
+				ldo3 {
 					regulator-name = "+V1.2_CSI";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				ldo4_reg: ldo4 {
+				ldo4 {
 					regulator-name = "+V1.2_VDD_RTC";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -951,32 +948,23 @@
 				 * +V2.8_AVDD_VDAC:
 				 * only required for (unsupported) analog RGB
 				 */
-				ldo5_reg: ldo5 {
+				ldo5 {
 					regulator-name = "+V2.8_AVDD_VDAC";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
 				};
 
-				/*
-				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
-				 * but LDO6 can't set voltage in 50mV
-				 * granularity
-				 */
-				ldo6_reg: ldo6 {
-					regulator-name = "+V1.05_AVDD_PLLE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
+				/* LDO6: unused */
 
-				ldo7_reg: ldo7 {
+				ldo7 {
 					regulator-name = "+V1.2_AVDD_PLL";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				ldo8_reg: ldo8 {
+				ldo8 {
 					regulator-name = "+V1.0_VDD_DDR_HS";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
@@ -1034,8 +1022,7 @@
 		regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
-
-			regulator-name = "tps62362-vout";
+			regulator-name = "+V1.2_VDD_CORE";
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
@@ -1043,6 +1030,7 @@
 			ti,vsel0-state-low;
 			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
 			ti,vsel1-state-low;
+			vin-supply =<&reg_module_3v3>;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi
index 4b6a8ecaac76..d2b688d90223 100644
--- a/arch/arm/boot/dts/tegra30-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra30-apalis.dtsi
@@ -12,14 +12,14 @@
 
 	pcie@3000 {
 		status = "okay";
-		avdd-pexa-supply = <&vdd2_reg>;
-		avdd-pexb-supply = <&vdd2_reg>;
-		avdd-pex-pll-supply = <&vdd2_reg>;
-		avdd-plle-supply = <&ldo6_reg>;
+		avdd-pexa-supply = <&reg_1v05>;
+		avdd-pexb-supply = <&reg_1v05>;
+		avdd-pex-pll-supply = <&reg_1v05>;
+		avdd-plle-supply = <&reg_1v05>;
 		hvdd-pex-supply = <&reg_module_3v3>;
 		vddio-pex-ctl-supply = <&reg_module_3v3>;
-		vdd-pexa-supply = <&vdd2_reg>;
-		vdd-pexb-supply = <&vdd2_reg>;
+		vdd-pexa-supply = <&reg_1v05>;
+		vdd-pexb-supply = <&reg_1v05>;
 
 		/* Apalis type specific */
 		pci@1,0 {
@@ -855,16 +855,13 @@
 		pmic: pmic@2d {
 			compatible = "ti,tps65911";
 			reg = <0x2d>;
-
+			#gpio-cells = <2>;
+			gpio-controller;
 			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <2>;
 			interrupt-controller;
-
+			ti,en-ck32k-xtal;
 			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
 			vcc1-supply = <&reg_module_3v3>;
 			vcc2-supply = <&reg_module_3v3>;
 			vcc3-supply = <&reg_1v8_vio>;
@@ -875,33 +872,33 @@
 			vccio-supply = <&reg_module_3v3>;
 
 			regulators {
-				vdd1_reg: vdd1 {
+				reg_1v8_vio: vio {
+					regulator-name = "+V1.8";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vdd1 {
 					regulator-name = "+V1.35_VDDIO_DDR";
 					regulator-min-microvolt = <1350000>;
 					regulator-max-microvolt = <1350000>;
 					regulator-always-on;
 				};
 
-				vdd2_reg: vdd2 {
+				reg_1v05: vdd2 {
 					regulator-name = "+V1.05";
 					regulator-min-microvolt = <1050000>;
 					regulator-max-microvolt = <1050000>;
 				};
 
-				vddctrl_reg: vddctrl {
+				vddctrl {
 					regulator-name = "+V1.0_VDD_CPU";
 					regulator-min-microvolt = <1150000>;
 					regulator-max-microvolt = <1150000>;
 					regulator-always-on;
 				};
 
-				reg_1v8_vio: vio {
-					regulator-name = "+V1.8";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
 				/* LDO1: unused */
 
 				/*
@@ -909,20 +906,20 @@
 				 * +V3.3_AUDIO_AVDD_S, +V3.3
 				 * see also +V3.3 fixed supply
 				 */
-				ldo2_reg: ldo2 {
+				ldo2 {
 					regulator-name = "EN_+V3.3";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
 					regulator-always-on;
 				};
 
-				ldo3_reg: ldo3 {
+				ldo3 {
 					regulator-name = "+V1.2_CSI";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 				};
 
-				ldo4_reg: ldo4 {
+				ldo4 {
 					regulator-name = "+V1.2_VDD_RTC";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
@@ -933,32 +930,23 @@
 				 * +V2.8_AVDD_VDAC:
 				 * only required for (unsupported) analog RGB
 				 */
-				ldo5_reg: ldo5 {
+				ldo5 {
 					regulator-name = "+V2.8_AVDD_VDAC";
 					regulator-min-microvolt = <2800000>;
 					regulator-max-microvolt = <2800000>;
 					regulator-always-on;
 				};
 
-				/*
-				 * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V
-				 * but LDO6 can't set voltage in 50mV
-				 * granularity
-				 */
-				ldo6_reg: ldo6 {
-					regulator-name = "+V1.05_AVDD_PLLE";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-				};
+				/* LDO6: unused */
 
-				ldo7_reg: ldo7 {
+				ldo7 {
 					regulator-name = "+V1.2_AVDD_PLL";
 					regulator-min-microvolt = <1200000>;
 					regulator-max-microvolt = <1200000>;
 					regulator-always-on;
 				};
 
-				ldo8_reg: ldo8 {
+				ldo8 {
 					regulator-name = "+V1.0_VDD_DDR_HS";
 					regulator-min-microvolt = <1000000>;
 					regulator-max-microvolt = <1000000>;
@@ -1016,8 +1004,7 @@
 		regulator@60 {
 			compatible = "ti,tps62362";
 			reg = <0x60>;
-
-			regulator-name = "tps62362-vout";
+			regulator-name = "+V1.2_VDD_CORE";
 			regulator-min-microvolt = <900000>;
 			regulator-max-microvolt = <1400000>;
 			regulator-boot-on;
@@ -1025,6 +1012,7 @@
 			ti,vsel0-state-low;
 			/* VSEL1: EN_CORE_DVFS_N low for DVFS */
 			ti,vsel1-state-low;
+			vin-supply =<&reg_module_3v3>;
 		};
 	};
 
-- 
2.14.4

      parent reply	other threads:[~2018-10-18 11:14 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-18 11:14 [PATCH v3 0/7] ARM: dts: tegra: last minute fixes Marcel Ziswiler
2018-10-18 11:14 ` [PATCH v3 1/7] ARM: tegra: fix simple-panel compatibles Marcel Ziswiler
2018-10-18 11:14 ` [PATCH v3 2/7] ARM: tegra: apalis-tk1/colibri_t20/t30: eval/iris: fix regulator gpio enable Marcel Ziswiler
2018-10-18 11:14 ` [PATCH v3 3/7] ARM: tegra: colibri_t20: reorder pmic properties Marcel Ziswiler
2018-10-18 11:14 ` [PATCH v3 4/7] ARM: tegra: apalis-tk1: further regulator clean-up Marcel Ziswiler
2018-10-18 11:14 ` [PATCH v3 5/7] ARM: tegra: apalis_t30/tk1: annotate power I2C being on-module Marcel Ziswiler
2018-10-18 11:14 ` [PATCH v3 6/7] ARM: tegra: colibri_t30: further regulator clean-up Marcel Ziswiler
2018-10-18 11:14 ` Marcel Ziswiler [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181018111411.26623-8-marcel@ziswiler.com \
    --to=marcel@ziswiler.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=marcel.ziswiler@toradex.com \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.