From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marek Vasut Date: Thu, 18 Oct 2018 20:37:49 +0200 Subject: [U-Boot] [PATCH 5/9] ARM: rmobile: salvator-x: Remove GSX clock force supply In-Reply-To: <20181018183753.15970-1-marek.vasut+renesas@gmail.com> References: <20181018183753.15970-1-marek.vasut+renesas@gmail.com> Message-ID: <20181018183753.15970-5-marek.vasut+renesas@gmail.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de From: Hiroyuki Yokoyama GSX clock force supply code is unnecessary at U-Boot, because GSX clock control is supported at the kernel driver. Signed-off-by: Hiroyuki Yokoyama --- board/renesas/salvator-x/salvator-x.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/board/renesas/salvator-x/salvator-x.c b/board/renesas/salvator-x/salvator-x.c index 296aa90a12..726a236af3 100644 --- a/board/renesas/salvator-x/salvator-x.c +++ b/board/renesas/salvator-x/salvator-x.c @@ -31,7 +31,6 @@ void s_init(void) { } -#define GSX_MSTP112 BIT(12) /* 3DG */ #define SCIF2_MSTP310 BIT(10) /* SCIF2 */ #define DVFS_MSTP926 BIT(26) #define HSUSB_MSTP704 BIT(4) /* HSUSB */ @@ -60,20 +59,9 @@ int board_early_init_f(void) int board_init(void) { - u32 cpu_type = rmobile_get_cpu_type(); - /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_TEXT_BASE + 0x50000; - if (cpu_type == RMOBILE_CPU_TYPE_R8A7795) { - /* GSX: force power and clock supply */ - writel(0x0000001F, SYSC_PWRONCR2); - while (readl(SYSC_PWRSR2) != 0x000003E0) - mdelay(20); - - mstp_clrbits_le32(MSTPSR1, SMSTPCR1, GSX_MSTP112); - } - /* USB1 pull-up */ setbits_le32(PFC_PUEN6, PUEN_USB1_OVC | PUEN_USB1_PWEN); -- 2.18.0