From: "Tobin C. Harding" <tobin@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Jiri Slaby <jslaby@suse.com>
Cc: "Tobin C. Harding" <tobin@kernel.org>,
Geert Uytterhoeven <geert@linux-m68k.org>,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 2/7] tty: Remove trailing whitespace
Date: Fri, 19 Oct 2018 09:37:02 +1100 [thread overview]
Message-ID: <20181018223707.9891-3-tobin@kernel.org> (raw)
In-Reply-To: <20181018223707.9891-1-tobin@kernel.org>
Currently files under drivers/tty/ contain trailing whitespace. This is
easy to fix and easy to review so lets do it now before we do other
kernel-docs cleanups.
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
---
drivers/tty/amiserial.c | 19 +-
drivers/tty/cyclades.c | 2 +-
drivers/tty/hvc/hvc_console.c | 2 +-
drivers/tty/hvc/hvc_xen.c | 2 +-
drivers/tty/hvc/hvcs.c | 4 +-
drivers/tty/moxa.c | 8 +-
drivers/tty/mxser.c | 4 +-
drivers/tty/n_hdlc.c | 154 ++---
drivers/tty/n_r3964.c | 6 +-
drivers/tty/rocket.c | 70 +--
drivers/tty/serial/21285.c | 2 +-
drivers/tty/serial/amba-pl010.c | 2 +-
drivers/tty/serial/max3100.c | 2 +-
drivers/tty/serial/max310x.c | 2 +-
drivers/tty/serial/mux.c | 12 +-
drivers/tty/serial/pmac_zilog.c | 58 +-
drivers/tty/serial/sa1100.c | 2 +-
drivers/tty/serial/sunsab.c | 14 +-
drivers/tty/serial/sunsu.c | 4 +-
drivers/tty/serial/sunzilog.c | 8 +-
drivers/tty/synclink.c | 1016 +++++++++++++++----------------
drivers/tty/synclinkmp.c | 16 +-
drivers/tty/tty_io.c | 2 +-
drivers/tty/tty_ioctl.c | 2 +-
drivers/tty/vt/consolemap.c | 50 +-
drivers/tty/vt/keyboard.c | 2 +-
drivers/tty/vt/vt.c | 12 +-
drivers/tty/vt/vt_ioctl.c | 16 +-
28 files changed, 746 insertions(+), 747 deletions(-)
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 73d4033cef6b..7027b85e0428 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -17,7 +17,7 @@
* Richard Lucock 28/12/99
*
* Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
+ * Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997,
* 1998, 1999 Theodore Ts'o
*
*/
@@ -239,7 +239,7 @@ static void rs_start(struct tty_struct *tty)
* rs_interrupt() should try to keep the interrupt handler as fast as
* possible. After you are done making modifications, it is not a bad
* idea to do:
- *
+ *
* gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c
*
* and look at the resulting assemble code in serial.s.
@@ -746,7 +746,7 @@ static void change_speed(struct tty_struct *tty, struct serial_state *info,
if (I_IGNBRK(tty)) {
info->ignore_status_mask |= UART_LSR_BI;
/*
- * If we're ignore parity and break indicators, ignore
+ * If we're ignore parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(tty))
@@ -940,7 +940,7 @@ static void rs_send_xchar(struct tty_struct *tty, char ch)
/*
* ------------------------------------------------------------
* rs_throttle()
- *
+ *
* This routine is called by the upper-layer tty layer to signal that
* incoming characters should be throttled.
* ------------------------------------------------------------
@@ -1085,7 +1085,6 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
return retval;
}
-
/*
* get_lsr_info - get line status register info
*
@@ -1266,7 +1265,7 @@ static int rs_ioctl(struct tty_struct *tty,
local_irq_save(flags);
cnow = info->icount; /* atomic copy */
local_irq_restore(flags);
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
ret = -EIO; /* no change => error */
break;
@@ -1348,7 +1347,7 @@ static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
/*
* ------------------------------------------------------------
* rs_close()
- *
+ *
* This routine is called when the serial port gets closed. First, we
* wait for the last remaining data to be sent. Then, we unlink its
* async structure from the interrupt chain if necessary, and we free
@@ -1390,7 +1389,7 @@ static void rs_close(struct tty_struct *tty, struct file * filp)
}
shutdown(tty, state);
rs_flush_buffer(tty);
-
+
tty_ldisc_flush(tty);
port->tty = NULL;
@@ -1418,7 +1417,7 @@ static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
* Set the check interval to be 1/5 of the estimated time to
* send a single character, and make it at least 1. The check
* interval should also be less than the timeout.
- *
+ *
* Note: we have to use pretty tight timings here to satisfy
* the NIST-PCTS.
*/
@@ -1669,7 +1668,7 @@ static int __init amiga_serial_probe(struct platform_device *pdev)
state = rs_table;
state->port = (int)&custom.serdatr; /* Just to give it a value */
state->custom_divisor = 0;
- state->icount.cts = state->icount.dsr =
+ state->icount.cts = state->icount.dsr =
state->icount.rng = state->icount.dcd = 0;
state->icount.rx = state->icount.tx = 0;
state->icount.frame = state->icount.parity = 0;
diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c
index 6d3c58051ce3..c82fce6f39ed 100644
--- a/drivers/tty/cyclades.c
+++ b/drivers/tty/cyclades.c
@@ -1028,7 +1028,7 @@ static void cyz_handle_tx(struct cyclades_port *info)
if (!char_count)
return;
-
+
tty = tty_port_tty_get(&info->port);
if (tty == NULL)
goto ztxdone;
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index 676cf5b73ed2..6d57d0bfff5d 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -204,7 +204,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index)
}
static int hvc_console_setup(struct console *co, char *options)
-{
+{
if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES)
return -ENODEV;
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index dc43fa96c3de..2c32dd544829 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -114,7 +114,7 @@ static int domU_write_console(uint32_t vtermno, const char *data, int len)
*/
while (len) {
int sent = __write_console(cons, data, len);
-
+
data += sent;
len -= sent;
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index cb4db1b3ca3c..2420068d69d8 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -153,8 +153,8 @@ MODULE_VERSION(HVCS_DRIVER_VERSION);
/*
* The hcall interface involves putting 8 chars into each of two registers.
* We load up those 2 registers (in arch/powerpc/platforms/pseries/hvconsole.c)
- * by casting char[16] to long[2]. It would work without __ALIGNED__, but a
- * little (tiny) bit slower because an unaligned load is slower than aligned
+ * by casting char[16] to long[2]. It would work without __ALIGNED__, but a
+ * little (tiny) bit slower because an unaligned load is slower than aligned
* load.
*/
#define __ALIGNED__ __attribute__((__aligned__(8)))
diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c
index 7ce06f43b6ae..91c3599a93d4 100644
--- a/drivers/tty/moxa.c
+++ b/drivers/tty/moxa.c
@@ -1635,10 +1635,10 @@ static void MoxaPortFlushData(struct moxa_port *port, int mode)
* Syntax:
* void MoxaPortFlushData(int port, int mode);
* int port : port number (0 - 127)
- * int mode
- * 0 : flush the Rx buffer
- * 1 : flush the Tx buffer
- * 2 : flush the Rx and Tx buffer
+ * int mode
+ * 0 : flush the Rx buffer
+ * 1 : flush the Tx buffer
+ * 2 : flush the Rx and Tx buffer
*
*
* Function 20: Write data.
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c
index 3f800b35689e..aac8c747e85a 100644
--- a/drivers/tty/mxser.c
+++ b/drivers/tty/mxser.c
@@ -1089,7 +1089,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp)
mutex_unlock(&port->mutex);
info->closing = 0;
/* Right now the tty_port set is done outside of the close_end helper
- as we don't yet have everyone using refcounts */
+ as we don't yet have everyone using refcounts */
tty_port_close_end(port, tty);
tty_port_tty_set(port, NULL);
}
@@ -1517,7 +1517,7 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp)
mutex_lock(&port->mutex);
if (!ip->ioaddr)
goto copy;
-
+
tty = tty_port_tty_get(port);
if (!tty)
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 1f2e24424b44..789251f8a1e2 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -18,7 +18,7 @@
* All HDLC data is frame oriented which means:
*
* 1. tty write calls represent one complete transmit frame of data
- * The device driver should accept the complete frame or none of
+ * The device driver should accept the complete frame or none of
* the frame (busy) in the write method. Each write call should have
* a byte count in the range of 2-65535 bytes (2 is min HDLC frame
* with 1 addr byte and 1 ctrl byte). The max byte count of 65535
@@ -39,7 +39,7 @@
* tty read calls.
*
* 3. tty read calls returns an entire frame of data or nothing.
- *
+ *
* 4. all send and receive data is considered raw. No processing
* or translation is performed by the line discipline, regardless
* of the tty flags
@@ -107,7 +107,7 @@
/*
* Buffers for individual HDLC frames
*/
-#define MAX_HDLC_FRAME_SIZE 65535
+#define MAX_HDLC_FRAME_SIZE 65535
#define DEFAULT_RX_BUF_COUNT 10
#define MAX_RX_BUF_COUNT 60
#define DEFAULT_TX_BUF_COUNT 3
@@ -234,10 +234,10 @@ static void n_hdlc_release(struct n_hdlc *n_hdlc)
{
struct tty_struct *tty = n_hdlc2tty (n_hdlc);
struct n_hdlc_buf *buf;
-
- if (debuglevel >= DEBUG_LEVEL_INFO)
+
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_release() called\n",__FILE__,__LINE__);
-
+
/* Ensure that the n_hdlcd process is not hanging on select()/poll() */
wake_up_interruptible (&tty->read_wait);
wake_up_interruptible (&tty->write_wait);
@@ -275,7 +275,7 @@ static void n_hdlc_release(struct n_hdlc *n_hdlc)
break;
}
kfree(n_hdlc);
-
+
} /* end of n_hdlc_release() */
/**
@@ -289,9 +289,9 @@ static void n_hdlc_tty_close(struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_close() called\n",__FILE__,__LINE__);
-
+
if (n_hdlc != NULL) {
if (n_hdlc->magic != HDLC_MAGIC) {
printk (KERN_WARNING"n_hdlc: trying to close unopened tty!\n");
@@ -311,10 +311,10 @@ static void n_hdlc_tty_close(struct tty_struct *tty)
n_hdlc_release (n_hdlc);
}
}
-
- if (debuglevel >= DEBUG_LEVEL_INFO)
+
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_close() success\n",__FILE__,__LINE__);
-
+
} /* end of n_hdlc_tty_close() */
/**
@@ -327,40 +327,40 @@ static int n_hdlc_tty_open (struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_open() called (device=%s)\n",
__FILE__,__LINE__,
tty->name);
-
+
/* There should not be an existing table for this slot. */
if (n_hdlc) {
printk (KERN_ERR"n_hdlc_tty_open:tty already associated!\n" );
return -EEXIST;
}
-
+
n_hdlc = n_hdlc_alloc();
if (!n_hdlc) {
printk (KERN_ERR "n_hdlc_alloc failed\n");
return -ENFILE;
}
-
+
tty->disc_data = n_hdlc;
n_hdlc->tty = tty;
tty->receive_room = 65536;
-
+
#if defined(TTY_NO_WRITE_SPLIT)
/* change tty_io write() to not split large writes into 8K chunks */
set_bit(TTY_NO_WRITE_SPLIT,&tty->flags);
#endif
-
+
/* flush receive data from driver */
tty_driver_flush_buffer(tty);
-
- if (debuglevel >= DEBUG_LEVEL_INFO)
+
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_open() success\n",__FILE__,__LINE__);
-
+
return 0;
-
+
} /* end of n_tty_hdlc_open() */
/**
@@ -378,10 +378,10 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
unsigned long flags;
struct n_hdlc_buf *tbuf;
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_send_frames() called\n",__FILE__,__LINE__);
check_again:
-
+
spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
if (n_hdlc->tbusy) {
n_hdlc->woke_up = 1;
@@ -394,10 +394,10 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
while (tbuf) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)sending frame %p, count=%d\n",
__FILE__,__LINE__,tbuf,tbuf->count);
-
+
/* Send the next block of data to device */
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
actual = tty->ops->write(tty, tbuf->buf, tbuf->count);
@@ -411,22 +411,22 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
/* pretending it was accepted by driver */
if (actual < 0)
actual = tbuf->count;
-
+
if (actual == tbuf->count) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)frame %p completed\n",
__FILE__,__LINE__,tbuf);
-
+
/* free current transmit buffer */
n_hdlc_buf_put(&n_hdlc->tx_free_buf_list, tbuf);
/* wait up sleeping writers */
wake_up_interruptible(&tty->write_wait);
-
+
/* get next pending transmit buffer */
tbuf = n_hdlc_buf_get(&n_hdlc->tx_buf_list);
} else {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)frame %p pending\n",
__FILE__,__LINE__,tbuf);
@@ -438,21 +438,21 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty)
break;
}
}
-
+
if (!tbuf)
clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
-
+
/* Clear the re-entry flag */
spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags);
n_hdlc->tbusy = 0;
- spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
-
+ spin_unlock_irqrestore(&n_hdlc->tx_buf_list.spinlock, flags);
+
if (n_hdlc->woke_up)
goto check_again;
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_send_frames() exit\n",__FILE__,__LINE__);
-
+
} /* end of n_hdlc_send_frames() */
/**
@@ -465,9 +465,9 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty2n_hdlc(tty);
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_wakeup() called\n",__FILE__,__LINE__);
-
+
if (!n_hdlc)
return;
@@ -477,7 +477,7 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty)
}
n_hdlc_send_frames (n_hdlc, tty);
-
+
} /* end of n_hdlc_tty_wakeup() */
/**
@@ -496,29 +496,29 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
register struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
register struct n_hdlc_buf *buf;
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_receive() called count=%d\n",
__FILE__,__LINE__, count);
-
+
/* This can happen if stuff comes in on the backup tty */
if (!n_hdlc || tty != n_hdlc->tty)
return;
-
+
/* verify line is using HDLC discipline */
if (n_hdlc->magic != HDLC_MAGIC) {
printk("%s(%d) line not using HDLC discipline\n",
__FILE__,__LINE__);
return;
}
-
+
if ( count>maxframe ) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d) rx count>maxframesize, data discarded\n",
__FILE__,__LINE__);
return;
}
- /* get a free HDLC buffer */
+ /* get a free HDLC buffer */
buf = n_hdlc_buf_get(&n_hdlc->rx_free_buf_list);
if (!buf) {
/* no buffers in free list, attempt to allocate another rx buffer */
@@ -526,21 +526,21 @@ static void n_hdlc_tty_receive(struct tty_struct *tty, const __u8 *data,
if (n_hdlc->rx_buf_list.count < MAX_RX_BUF_COUNT)
buf = kmalloc(N_HDLC_BUF_SIZE, GFP_ATOMIC);
}
-
+
if (!buf) {
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d) no more rx buffers, data discarded\n",
__FILE__,__LINE__);
return;
}
-
+
/* copy received data to HDLC buffer */
memcpy(buf->buf,data,count);
buf->count=count;
/* add HDLC buffer to list of received frames */
n_hdlc_buf_put(&n_hdlc->rx_buf_list, buf);
-
+
/* wake up any blocked reads and perform async signalling */
wake_up_interruptible (&tty->read_wait);
if (n_hdlc->tty->fasync != NULL)
@@ -565,9 +565,9 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
struct n_hdlc_buf *rbuf;
DECLARE_WAITQUEUE(wait, current);
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_read() called\n",__FILE__,__LINE__);
-
+
/* Validate the pointers */
if (!n_hdlc)
return -EIO;
@@ -610,7 +610,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list, rbuf);
break;
}
-
+
/* no data */
if (file->f_flags & O_NONBLOCK) {
ret = -EAGAIN;
@@ -629,7 +629,7 @@ static ssize_t n_hdlc_tty_read(struct tty_struct *tty, struct file *file,
__set_current_state(TASK_RUNNING);
return ret;
-
+
} /* end of n_hdlc_tty_read() */
/**
@@ -649,10 +649,10 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
DECLARE_WAITQUEUE(wait, current);
struct n_hdlc_buf *tbuf;
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_write() called count=%zd\n",
__FILE__,__LINE__,count);
-
+
/* Verify pointers */
if (!n_hdlc)
return -EIO;
@@ -669,12 +669,12 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
maxframe );
count = maxframe;
}
-
+
add_wait_queue(&tty->write_wait, &wait);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
-
+
tbuf = n_hdlc_buf_get(&n_hdlc->tx_free_buf_list);
if (tbuf)
break;
@@ -684,15 +684,15 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
break;
}
schedule();
-
+
n_hdlc = tty2n_hdlc (tty);
- if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
+ if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC ||
tty != n_hdlc->tty) {
printk("n_hdlc_tty_write: %p invalid after wait!\n", n_hdlc);
error = -EIO;
break;
}
-
+
if (signal_pending(current)) {
error = -EINTR;
break;
@@ -702,7 +702,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
__set_current_state(TASK_RUNNING);
remove_wait_queue(&tty->write_wait, &wait);
- if (!error) {
+ if (!error) {
/* Retrieve the user's buffer */
memcpy(tbuf->buf, data, count);
@@ -713,7 +713,7 @@ static ssize_t n_hdlc_tty_write(struct tty_struct *tty, struct file *file,
}
return error;
-
+
} /* end of n_hdlc_tty_write() */
/**
@@ -734,10 +734,10 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
unsigned long flags;
struct n_hdlc_buf *buf = NULL;
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_ioctl() called %d\n",
__FILE__,__LINE__,cmd);
-
+
/* Verify the status of the device */
if (!n_hdlc || n_hdlc->magic != HDLC_MAGIC)
return -EBADF;
@@ -783,7 +783,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
break;
}
return error;
-
+
} /* end of n_hdlc_tty_ioctl() */
/**
@@ -791,7 +791,7 @@ static int n_hdlc_tty_ioctl(struct tty_struct *tty, struct file *file,
* @tty - pointer to tty instance data
* @filp - pointer to open file object for device
* @poll_table - wait queue for operations
- *
+ *
* Determine which operations (read/write) will not block and return info
* to caller.
* Returns a bit mask containing info on which ops will not block.
@@ -802,9 +802,9 @@ static __poll_t n_hdlc_tty_poll(struct tty_struct *tty, struct file *filp,
struct n_hdlc *n_hdlc = tty2n_hdlc (tty);
__poll_t mask = 0;
- if (debuglevel >= DEBUG_LEVEL_INFO)
+ if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_tty_poll() called\n",__FILE__,__LINE__);
-
+
if (n_hdlc && n_hdlc->magic == HDLC_MAGIC && tty == n_hdlc->tty) {
/* queue current process into any wait queue that */
/* may awaken in the future (read and write) */
@@ -855,25 +855,25 @@ static struct n_hdlc *n_hdlc_alloc(void)
buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
if (buf)
n_hdlc_buf_put(&n_hdlc->rx_free_buf_list,buf);
- else if (debuglevel >= DEBUG_LEVEL_INFO)
+ else if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_alloc(), kalloc() failed for rx buffer %d\n",__FILE__,__LINE__, i);
}
-
+
/* allocate free tx buffer list */
for(i=0;i<DEFAULT_TX_BUF_COUNT;i++) {
buf = kmalloc(N_HDLC_BUF_SIZE, GFP_KERNEL);
if (buf)
n_hdlc_buf_put(&n_hdlc->tx_free_buf_list,buf);
- else if (debuglevel >= DEBUG_LEVEL_INFO)
+ else if (debuglevel >= DEBUG_LEVEL_INFO)
printk("%s(%d)n_hdlc_alloc(), kalloc() failed for tx buffer %d\n",__FILE__,__LINE__, i);
}
-
+
/* Initialize the control block */
n_hdlc->magic = HDLC_MAGIC;
n_hdlc->flags = 0;
-
+
return n_hdlc;
-
+
} /* end of n_hdlc_alloc() */
/**
@@ -915,7 +915,7 @@ static void n_hdlc_buf_put(struct n_hdlc_buf_list *buf_list,
/**
* n_hdlc_buf_get - remove and return an HDLC buffer from list
* @buf_list - pointer to HDLC buffer list
- *
+ *
* Remove and return an HDLC buffer from the head of the specified HDLC buffer
* list.
* Returns a pointer to HDLC buffer if available, otherwise %NULL.
@@ -964,7 +964,7 @@ static int __init n_hdlc_init(void)
printk(hdlc_register_fail, status);
return status;
-
+
} /* end of init_module() */
static const char hdlc_unregister_ok[] __exitdata =
diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c
index dbf1ab36758e..84f4f4f9b7c1 100644
--- a/drivers/tty/n_r3964.c
+++ b/drivers/tty/n_r3964.c
@@ -2,7 +2,7 @@
/* r3964 linediscipline for linux
*
* -----------------------------------------------------------
- * Copyright by
+ * Copyright by
* Philips Automation Projects
* Kassel (Germany)
* -----------------------------------------------------------
@@ -1126,8 +1126,8 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file,
unsigned char *new_data;
TRACE_L("write request, %d characters", count);
-/*
- * Verify the pointers
+/*
+ * Verify the pointers
*/
if (!pInfo)
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index c123fdb7eed8..c01fc69b8944 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -3,7 +3,7 @@
* RocketPort device driver for Linux
*
* Written by Theodore Ts'o, 1995, 1996, 1997, 1998, 1999, 2000.
- *
+ *
* Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000, 2003 by Comtrol, Inc.
*/
@@ -14,14 +14,14 @@
* from user mode) and the timer bottom half (tasklet). This is a polled driver, interrupts
* are not used.
*
- * Critical data:
- * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
- * serial port state information and the xmit_buf circular buffer. Protected by
+ * Critical data:
+ * - rp_table[], accessed through passed "info" pointers, is a global (static) array of
+ * serial port state information and the xmit_buf circular buffer. Protected by
* a per port spinlock.
* - xmit_flags[], an array of ints indexed by line (port) number, indicating that there
* is data to be transmitted. Protected by atomic bit operations.
* - rp_num_ports, int indicating number of open ports, protected by atomic operations.
- *
+ *
* rp_write() and rp_write_char() functions use a per port semaphore to protect against
* simultaneous access to the same port by more than one process.
*/
@@ -90,7 +90,7 @@ static void rp_do_poll(struct timer_list *unused);
static struct tty_driver *rocket_driver;
-static struct rocket_version driver_version = {
+static struct rocket_version driver_version = {
ROCKET_VERSION, ROCKET_DATE
};
@@ -205,8 +205,8 @@ static Byte_t sBitMapSetTbl[8] = {
static int sClockPrescale = 0x14;
/*
- * Line number is the ttySIx number (x), the Minor number. We
- * assign them sequentially, starting at zero. The following
+ * Line number is the ttySIx number (x), the Minor number. We
+ * assign them sequentially, starting at zero. The following
* array keeps track of the line number assigned to a given board/aiop/channel.
*/
static unsigned char lineNumbers[MAX_RP_PORTS];
@@ -294,9 +294,9 @@ static inline int rocket_paranoia_check(struct r_port *info,
}
-/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
- * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
- * tty layer.
+/* Serial port receive data function. Called (from timer poll) when an AIOPIC signals
+ * that receive data is present on a serial port. Pulls data from FIFO, moves it into the
+ * tty layer.
*/
static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
unsigned int ChanStatus)
@@ -327,7 +327,7 @@ static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
}
}
- /*
+ /*
* if we previously entered status mode, then read down the
* FIFO one word at a time, pulling apart the character and
* the status. Update error counters depending on status
@@ -402,9 +402,9 @@ static void rp_do_receive(struct r_port *info, CHANNEL_t *cp,
}
/*
- * Serial port transmit data function. Called from the timer polling loop as a
+ * Serial port transmit data function. Called from the timer polling loop as a
* result of a bit set in xmit_flags[], indicating data (from the tty layer) is ready
- * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
+ * to be sent out the serial port. Data is buffered in rp_table[line].xmit_buf, it is
* moved to the port's xmit FIFO. *info is critical data, protected by spinlocks.
*/
static void rp_do_transmit(struct r_port *info)
@@ -472,7 +472,7 @@ static void rp_do_transmit(struct r_port *info)
/*
* Called when a serial port signals it has read data in it's RX FIFO.
* It checks what interrupts are pending and services them, including
- * receiving serial data.
+ * receiving serial data.
*/
static void rp_handle_port(struct r_port *info)
{
@@ -574,8 +574,8 @@ static void rp_do_poll(struct timer_list *unused)
/*
* xmit_flags contains bit-significant flags, indicating there is data
- * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
- * 1, ... (32 total possible). The variable i has the aiop and ch
+ * to xmit on the port. Bit 0 is port 0 on this board, bit 1 is port
+ * 1, ... (32 total possible). The variable i has the aiop and ch
* numbers encoded in it (port 0-7 are aiop0, 8-15 are aiop1, etc).
*/
if (xmitmask) {
@@ -598,8 +598,8 @@ static void rp_do_poll(struct timer_list *unused)
}
/*
- * Initializes the r_port structure for a port, as well as enabling the port on
- * the board.
+ * Initializes the r_port structure for a port, as well as enabling the port on
+ * the board.
* Inputs: board, aiop, chan numbers
*/
static void __init
@@ -686,7 +686,7 @@ init_r_port(int board, int aiop, int chan, struct pci_dev *pci_dev)
}
/*
- * Configures a rocketport port according to its termio settings. Called from
+ * Configures a rocketport port according to its termio settings. Called from
* user mode into the driver (exception handler). *info CD manipulation is spinlock protected.
*/
static void configure_r_port(struct tty_struct *tty, struct r_port *info,
@@ -862,8 +862,8 @@ static void dtr_rts(struct tty_port *port, int on)
}
/*
- * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
- * port's r_port struct. Initializes the port hardware.
+ * Exception handler that opens a serial port. Creates xmit_buf storage, fills in
+ * port's r_port struct. Initializes the port hardware.
*/
static int rp_open(struct tty_struct *tty, struct file *filp)
{
@@ -877,7 +877,7 @@ static int rp_open(struct tty_struct *tty, struct file *filp)
if (info == NULL)
return -ENXIO;
port = &info->port;
-
+
page = __get_free_page(GFP_KERNEL);
if (!page)
return -ENOMEM;
@@ -962,7 +962,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
struct tty_port *port = &info->port;
int timeout;
CHANNEL_t *cp;
-
+
if (rocket_paranoia_check(info, "rp_close"))
return;
@@ -998,7 +998,7 @@ static void rp_close(struct tty_struct *tty, struct file *filp)
sClrDTR(cp);
rp_flush_buffer(tty);
-
+
tty_ldisc_flush(tty);
clear_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
@@ -1119,7 +1119,7 @@ static int sGetChanRI(CHANNEL_T * ChP)
/* Here are the routines used by rp_ioctl. These are all called from exception handlers. */
/*
- * Returns the state of the serial modem control lines. These next 2 functions
+ * Returns the state of the serial modem control lines. These next 2 functions
* are the way kernel versions > 2.5 handle modem control lines rather than IOCTLs.
*/
static int rp_tiocmget(struct tty_struct *tty)
@@ -1129,7 +1129,7 @@ static int rp_tiocmget(struct tty_struct *tty)
ChanStatus = sGetChanStatusLo(&info->channel);
control = info->channel.TxControl[3];
- result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
+ result = ((control & SET_RTS) ? TIOCM_RTS : 0) |
((control & SET_DTR) ? TIOCM_DTR : 0) |
((ChanStatus & CD_ACT) ? TIOCM_CAR : 0) |
(sGetChanRI(&info->channel) ? TIOCM_RNG : 0) |
@@ -1139,7 +1139,7 @@ static int rp_tiocmget(struct tty_struct *tty)
return result;
}
-/*
+/*
* Sets the modem control lines
*/
static int rp_tiocmset(struct tty_struct *tty,
@@ -1537,7 +1537,7 @@ static int rp_put_char(struct tty_struct *tty, unsigned char ch)
* Exception handler - write routine, called when user app writes to the device.
* A per port write mutex is used to protect from another process writing to
* this port at the same time. This other process could be running on the other CPU
- * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
+ * or get control of the CPU if the copy_from_user() blocks due to a page fault (swapped out).
* Spinlocks protect the info xmit members.
*/
static int rp_write(struct tty_struct *tty,
@@ -1564,7 +1564,7 @@ static int rp_write(struct tty_struct *tty,
info->xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
/*
- * If the write queue for the port is empty, and there is FIFO space, stuff bytes
+ * If the write queue for the port is empty, and there is FIFO space, stuff bytes
* into FIFO. Use the write queue for temp storage.
*/
if (!tty->stopped && info->xmit_cnt == 0 && info->xmit_fifo_room > 0) {
@@ -1617,7 +1617,7 @@ static int rp_write(struct tty_struct *tty,
if ((retval > 0) && !tty->stopped)
set_bit((info->aiop * 8) + info->chan, (void *) &xmit_flags[info->board]);
-
+
end:
if (info->xmit_cnt < WAKEUP_CHARS) {
tty_wakeup(tty);
@@ -2285,7 +2285,7 @@ static int __init init_ISA(int i)
rocketModel[i].numPorts = total_num_chan;
rocketModel[i].model = MODEL_ISA;
- printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
+ printk(KERN_INFO "RocketPort ISA card #%d found at 0x%lx - %d AIOPs %s\n",
i, rcktpt_io_addr[i], num_aiops, type_string);
printk(KERN_INFO "Installing %s, creating /dev/ttyR%d - %ld\n",
@@ -2339,7 +2339,7 @@ static int __init rp_init(void)
goto err;
/*
- * If board 1 is non-zero, there is at least one ISA configured. If controller is
+ * If board 1 is non-zero, there is at least one ISA configured. If controller is
* zero, use the default controller IO address of board1 + 0x40.
*/
if (board1) {
@@ -3104,8 +3104,8 @@ static unsigned char GetLineNumber(int ctrl, int aiop, int ch)
/*
* Stores the line number associated with a given controller (board), aiop
- * and channel number.
- * Returns: The line number assigned
+ * and channel number.
+ * Returns: The line number assigned
*/
static unsigned char SetLineNumber(int ctrl, int aiop, int ch)
{
diff --git a/drivers/tty/serial/21285.c b/drivers/tty/serial/21285.c
index 32b3acf8150a..6176f5e8b228 100644
--- a/drivers/tty/serial/21285.c
+++ b/drivers/tty/serial/21285.c
@@ -227,7 +227,7 @@ serial21285_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
b = port->uartclk / (16 * quot);
tty_termios_encode_baud_rate(termios, b, b);
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index 2c37d11726ab..fa49f25a7fbc 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -390,7 +390,7 @@ pl010_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
quot = uart_get_divisor(port, baud);
switch (termios->c_cflag & CSIZE) {
diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c
index 371569a0fd00..95090a6ad6c4 100644
--- a/drivers/tty/serial/max3100.c
+++ b/drivers/tty/serial/max3100.c
@@ -826,7 +826,7 @@ static int max3100_remove(struct spi_device *spi)
}
WARN_ON(i == MAX_MAX3100);
-
+
/* check if this is the last chip we have */
for (i = 0; i < MAX_MAX3100; i++)
if (max3100s[i]) {
diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c
index 3db48fcd6068..aae234b14be6 100644
--- a/drivers/tty/serial/max310x.c
+++ b/drivers/tty/serial/max310x.c
@@ -386,7 +386,7 @@ static int max14830_detect(struct device *dev)
MAX310X_EXTREG_ENBL);
if (ret)
return ret;
-
+
regmap_read(s->regmap, MAX310X_REVID_EXTREG, &val);
regmap_write(s->regmap, MAX310X_GLOBALCMD_REG, MAX310X_EXTREG_DSBL);
if (((val & MAX310x_REV_MASK) != MAX14830_REV_ID)) {
diff --git a/drivers/tty/serial/mux.c b/drivers/tty/serial/mux.c
index 880d1b3127c2..f7d67125675e 100644
--- a/drivers/tty/serial/mux.c
+++ b/drivers/tty/serial/mux.c
@@ -108,7 +108,7 @@ static int __init get_mux_port_count(struct parisc_device *dev)
static unsigned int mux_tx_empty(struct uart_port *port)
{
return UART_GET_FIFO_CNT(port) ? 0 : TIOCSER_TEMT;
-}
+}
/**
* mux_set_mctrl - Set the current state of the modem control inputs.
@@ -130,7 +130,7 @@ static void mux_set_mctrl(struct uart_port *port, unsigned int mctrl)
* treated as permanently active.
*/
static unsigned int mux_get_mctrl(struct uart_port *port)
-{
+{
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
}
@@ -209,7 +209,7 @@ static void mux_write(struct uart_port *port)
} while(--count > 0);
- while(UART_GET_FIFO_CNT(port))
+ while(UART_GET_FIFO_CNT(port))
udelay(1);
if(uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
@@ -254,7 +254,7 @@ static void mux_read(struct uart_port *port)
tty_insert_flip_char(tport, data & 0xFF, TTY_NORMAL);
}
-
+
if (start_count != port->icount.rx)
tty_flip_buffer_push(tport);
}
@@ -312,7 +312,7 @@ static const char *mux_type(struct uart_port *port)
/**
* mux_release_port - Release memory and IO regions.
* @port: Ptr to the uart_port.
- *
+ *
* Release any memory and IO region resources currently in use by
* the port.
*/
@@ -372,7 +372,7 @@ static int mux_verify_port(struct uart_port *port, struct serial_struct *ser)
* This function periodically polls the Serial MUX to check for new data.
*/
static void mux_poll(struct timer_list *unused)
-{
+{
int i;
for(i = 0; i < port_cnt; ++i) {
diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c
index a5558051de74..5fcd34bbd0ce 100644
--- a/drivers/tty/serial/pmac_zilog.c
+++ b/drivers/tty/serial/pmac_zilog.c
@@ -2,7 +2,7 @@
/*
* Driver for PowerMac Z85c30 based ESCC cell found in the
* "macio" ASICs of various PowerMac models
- *
+ *
* Copyright (C) 2003 Ben. Herrenschmidt (benh@kernel.crashing.org)
*
* Derived from drivers/macintosh/macserial.c by Paul Mackerras
@@ -108,7 +108,7 @@ static struct uart_driver pmz_uart_reg = {
};
-/*
+/*
* Load all registers to reprogram the port
* This function must only be called when the TX is not busy. The UART
* port lock must be held and local interrupts disabled.
@@ -165,7 +165,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
/* Lower and upper byte of baud rate generator divisor. */
write_zsreg(uap, R12, regs[R12]);
write_zsreg(uap, R13, regs[R13]);
-
+
/* Now rewrite R14, with BRENAB (if set). */
write_zsreg(uap, R14, regs[R14]);
@@ -184,7 +184,7 @@ static void pmz_load_zsregs(struct uart_pmac_port *uap, u8 *regs)
write_zsreg(uap, R9, regs[R9]);
}
-/*
+/*
* We do like sunzilog to avoid disrupting pending Tx
* Reprogram the Zilog channel HW registers with the copies found in the
* software state struct. If the transmitter is busy, we defer this update
@@ -460,7 +460,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id)
goto skip_a;
}
write_zsreg(uap_a, R0, RES_H_IUS);
- zssync(uap_a);
+ zssync(uap_a);
if (r3 & CHAEXT)
pmz_status_handle(uap_a);
if (r3 & CHARxIP)
@@ -510,7 +510,7 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
{
unsigned long flags;
u8 status;
-
+
spin_lock_irqsave(&uap->port.lock, flags);
status = read_zsreg(uap, R0);
spin_unlock_irqrestore(&uap->port.lock, flags);
@@ -518,7 +518,7 @@ static inline u8 pmz_peek_status(struct uart_pmac_port *uap)
return status;
}
-/*
+/*
* Check if transmitter is empty
* The port lock is not held.
*/
@@ -532,7 +532,7 @@ static unsigned int pmz_tx_empty(struct uart_port *port)
return 0;
}
-/*
+/*
* Set Modem Control (RTS & DTR) bits
* The port lock is held and interrupts are disabled.
* Note: Shall we really filter out RTS on external ports or
@@ -563,7 +563,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
else
clear_bits |= DTR;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
uap->curregs[R5] |= set_bits;
uap->curregs[R5] &= ~clear_bits;
@@ -573,7 +573,7 @@ static void pmz_set_mctrl(struct uart_port *port, unsigned int mctrl)
zssync(uap);
}
-/*
+/*
* Get Modem Control bits (only the input ones, the core will
* or that with a cached value of the control ones)
* The port lock is held and interrupts are disabled.
@@ -597,7 +597,7 @@ static unsigned int pmz_get_mctrl(struct uart_port *port)
return ret;
}
-/*
+/*
* Stop TX side. Dealt like sunzilog at next Tx interrupt,
* though for DMA, we will have to do a bit more.
* The port lock is held and interrupts are disabled.
@@ -607,7 +607,7 @@ static void pmz_stop_tx(struct uart_port *port)
to_pmz(port)->flags |= PMACZILOG_FLAG_TX_STOPPED;
}
-/*
+/*
* Kick the Tx side.
* The port lock is held and interrupts are disabled.
*/
@@ -652,7 +652,7 @@ static void pmz_start_tx(struct uart_port *port)
pmz_debug("pmz: start_tx() done.\n");
}
-/*
+/*
* Stop Rx side, basically disable emitting of
* Rx interrupts on the port. We don't disable the rx
* side of the chip proper though
@@ -671,7 +671,7 @@ static void pmz_stop_rx(struct uart_port *port)
pmz_debug("pmz: stop_rx() done.\n");
}
-/*
+/*
* Enable modem status change interrupts
* The port lock is held.
*/
@@ -691,7 +691,7 @@ static void pmz_enable_ms(struct uart_port *port)
}
}
-/*
+/*
* Control break state emission
* The port lock is not held.
*/
@@ -924,7 +924,7 @@ static int pmz_startup(struct uart_port *port)
spin_lock_irqsave(&port->lock, flags);
pwr_delay = __pmz_startup(uap);
spin_unlock_irqrestore(&port->lock, flags);
- }
+ }
sprintf(uap->irq_name, PMACZILOG_NAME"%d", uap->port.line);
if (request_irq(uap->port.irq, pmz_interrupt, IRQF_SHARED,
uap->irq_name, uap)) {
@@ -1176,7 +1176,7 @@ static void pmz_irda_setup(struct uart_pmac_port *uap, unsigned long *baud)
mdelay(1);
/* Switch SCC to 19200 */
- pmz_convert_to_zs(uap, CS8, 0, 19200);
+ pmz_convert_to_zs(uap, CS8, 0, 19200);
pmz_load_zsregs(uap, uap->curregs);
mdelay(1);
@@ -1284,7 +1284,7 @@ static void pmz_set_termios(struct uart_port *port, struct ktermios *termios,
struct uart_pmac_port *uap = to_pmz(port);
unsigned long flags;
- spin_lock_irqsave(&port->lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
/* Disable IRQs on the port */
pmz_interrupt_control(uap, 0);
@@ -1415,7 +1415,7 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
uap->control_reg = uap->port.membase;
uap->data_reg = uap->control_reg + 0x10;
-
+
/*
* Request & map DBDMA registers
*/
@@ -1426,15 +1426,15 @@ static int __init pmz_init_port(struct uart_pmac_port *uap)
#else
memset(&r_txdma, 0, sizeof(struct resource));
memset(&r_rxdma, 0, sizeof(struct resource));
-#endif
+#endif
if (ZS_HAS_DMA(uap)) {
uap->tx_dma_regs = ioremap(r_txdma.start, 0x100);
- if (uap->tx_dma_regs == NULL) {
+ if (uap->tx_dma_regs == NULL) {
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
goto no_dma;
}
uap->rx_dma_regs = ioremap(r_rxdma.start, 0x100);
- if (uap->rx_dma_regs == NULL) {
+ if (uap->rx_dma_regs == NULL) {
iounmap(uap->tx_dma_regs);
uap->tx_dma_regs = NULL;
uap->flags &= ~PMACZILOG_FLAG_HAS_DMA;
@@ -1545,7 +1545,7 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
struct uart_pmac_port *uap;
int i;
-
+
/* Iterate the pmz_ports array to find a matching entry
*/
for (i = 0; i < MAX_ZS_PORTS; i++)
@@ -1580,7 +1580,7 @@ static int pmz_attach(struct macio_dev *mdev, const struct of_device_id *match)
static int pmz_detach(struct macio_dev *mdev)
{
struct uart_pmac_port *uap = dev_get_drvdata(&mdev->ofdev.dev);
-
+
if (!uap)
return -ENODEV;
@@ -1593,7 +1593,7 @@ static int pmz_detach(struct macio_dev *mdev)
dev_set_drvdata(&mdev->ofdev.dev, NULL);
uap->dev = NULL;
uap->port.dev = NULL;
-
+
return 0;
}
@@ -1643,7 +1643,7 @@ static int __init pmz_probe(void)
for_each_node_by_name(node_p, "escc") {
/*
* First get channel A/B node pointers
- *
+ *
* TODO: Add routines with proper locking to do that...
*/
node_a = node_b = NULL;
@@ -1871,7 +1871,7 @@ static int __init init_pmz(void)
int rc, i;
printk(KERN_INFO "%s\n", version);
- /*
+ /*
* First, we need to do a direct OF-based probe pass. We
* do that because we want serial console up before the
* macio stuffs calls us back, and since that makes it
@@ -1892,7 +1892,7 @@ static int __init init_pmz(void)
*/
rc = pmz_register();
if (rc) {
- printk(KERN_ERR
+ printk(KERN_ERR
"pmac_zilog: Error registering serial device, disabling pmac_zilog.\n"
"pmac_zilog: Did another serial driver already claim the minors?\n");
/* effectively "pmz_unprobe()" */
@@ -2027,7 +2027,7 @@ static int __init pmz_console_setup(struct console *co, char *options)
pwr_delay = __pmz_startup(uap);
if (pwr_delay)
mdelay(pwr_delay);
-
+
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/tty/serial/sa1100.c b/drivers/tty/serial/sa1100.c
index a399772be3fc..ef20d42c321c 100644
--- a/drivers/tty/serial/sa1100.c
+++ b/drivers/tty/serial/sa1100.c
@@ -436,7 +436,7 @@ sa1100_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
spin_lock_irqsave(&sport->port.lock, flags);
diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c
index 7744ed852d52..680df0e62bda 100644
--- a/drivers/tty/serial/sunsab.c
+++ b/drivers/tty/serial/sunsab.c
@@ -447,7 +447,7 @@ static void sunsab_start_tx(struct uart_port *port)
up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR);
writeb(up->interrupt_mask1, &up->regs->w.imr1);
-
+
if (!test_bit(SAB82532_XPR, &up->irqflags))
return;
@@ -554,7 +554,7 @@ static int sunsab_startup(struct uart_port *port)
(void) readb(&up->regs->r.isr1);
/*
- * Now, initialize the UART
+ * Now, initialize the UART
*/
writeb(0, &up->regs->w.ccr0); /* power-down */
writeb(SAB82532_CCR0_MCE | SAB82532_CCR0_SC_NRZ |
@@ -568,7 +568,7 @@ static int sunsab_startup(struct uart_port *port)
SAB82532_MODE_RAC);
writeb(up->cached_mode, &up->regs->w.mode);
writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
-
+
tmp = readb(&up->regs->rw.ccr0);
tmp |= SAB82532_CCR0_PU; /* power-up */
writeb(tmp, &up->regs->rw.ccr0);
@@ -612,7 +612,7 @@ static void sunsab_shutdown(struct uart_port *port)
up->cached_dafo &= ~SAB82532_DAFO_XBRK;
writeb(up->cached_dafo, &up->regs->rw.dafo);
- /* Disable Receiver */
+ /* Disable Receiver */
up->cached_mode &= ~SAB82532_MODE_RAC;
writeb(up->cached_mode, &up->regs->rw.mode);
@@ -627,7 +627,7 @@ static void sunsab_shutdown(struct uart_port *port)
* speed the chip was configured for when the port was open).
*/
#if 0
- /* Power Down */
+ /* Power Down */
tmp = readb(&up->regs->rw.ccr0);
tmp &= ~SAB82532_CCR0_PU;
writeb(tmp, &up->regs->rw.ccr0);
@@ -797,7 +797,7 @@ static const char *sunsab_type(struct uart_port *port)
{
struct uart_sunsab_port *up = (void *)port;
static char buf[36];
-
+
sprintf(buf, "SAB82532 %s", sab82532_version[up->type]);
return buf;
}
@@ -942,7 +942,7 @@ static int sunsab_console_setup(struct console *con, char *options)
sunsab_set_mctrl(&up->port, TIOCM_DTR | TIOCM_RTS);
spin_unlock_irqrestore(&up->port.lock, flags);
-
+
return 0;
}
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 1a371c37a644..a2b9b963d521 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -913,7 +913,7 @@ sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
@@ -1079,7 +1079,7 @@ static void sunsu_autoconfig(struct uart_sunsu_port *up)
save_mcr = serial_in(up, UART_MCR);
save_lcr = serial_in(up, UART_LCR);
- /*
+ /*
* Check to see if a UART is really there. Certain broken
* internal modems based on the Rockwell chipset fail this
* test, because they apparently don't implement the loopback
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index cb0dbff46db0..801856a2c2db 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -228,7 +228,7 @@ static int __load_zsregs(struct zilog_channel __iomem *channel, unsigned char *r
/* Lower and upper byte of baud rate generator divisor. */
write_zsreg(channel, R12, regs[R12]);
write_zsreg(channel, R13, regs[R13]);
-
+
/* Now rewrite R14, with BRENAB (if set). */
write_zsreg(channel, R14, regs[R14]);
@@ -661,7 +661,7 @@ static void sunzilog_set_mctrl(struct uart_port *port, unsigned int mctrl)
else
clear_bits |= DTR;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
up->curregs[R5] |= set_bits;
up->curregs[R5] &= ~clear_bits;
write_zsreg(channel, R5, up->curregs[R5]);
@@ -749,7 +749,7 @@ static void sunzilog_enable_ms(struct uart_port *port)
if (new_reg != up->curregs[R15]) {
up->curregs[R15] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R15, up->curregs[R15] & ~WR7pEN);
}
}
@@ -776,7 +776,7 @@ static void sunzilog_break_ctl(struct uart_port *port, int break_state)
if (new_reg != up->curregs[R5]) {
up->curregs[R5] = new_reg;
- /* NOTE: Not subject to 'transmitter active' rule. */
+ /* NOTE: Not subject to 'transmitter active' rule. */
write_zsreg(channel, R5, up->curregs[R5]);
}
diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c
index fbdf4d01c6a9..1dec82fae106 100644
--- a/drivers/tty/synclink.c
+++ b/drivers/tty/synclink.c
@@ -21,7 +21,7 @@
* contains exactly one complete HDLC frame. Calling mgsl_put_char
* will start assembling an HDLC frame that will not be sent until
* mgsl_flush_chars or mgsl_write is called.
- *
+ *
* Synchronous receive data is reported as complete frames. To accomplish
* this, the TTY flip buffer is bypassed (too small to hold largest
* frame and may fragment frames) and the line discipline
@@ -153,7 +153,7 @@ typedef struct _DMABUFFERENTRY
#define IO_PIN_SHUTDOWN_LIMIT 100
struct _input_signal_events {
- int ri_up;
+ int ri_up;
int ri_down;
int dsr_up;
int dsr_down;
@@ -174,29 +174,29 @@ struct tx_holding_buffer {
/*
* Device instance data structure
*/
-
+
struct mgsl_struct {
int magic;
struct tty_port port;
int line;
int hw_version;
-
+
struct mgsl_icount icount;
-
+
int timeout;
int x_char; /* xon/xoff character */
u16 read_status_mask;
- u16 ignore_status_mask;
+ u16 ignore_status_mask;
unsigned char *xmit_buf;
int xmit_head;
int xmit_tail;
int xmit_cnt;
-
+
wait_queue_head_t status_event_wait_q;
wait_queue_head_t event_wait_q;
struct timer_list tx_timer; /* HDLC transmit timeout timer */
struct mgsl_struct *next_device; /* device list link */
-
+
spinlock_t irq_spinlock; /* spinlock for synchronizing with ISR */
struct work_struct task; /* task structure for scheduling bh */
@@ -210,7 +210,7 @@ struct mgsl_struct {
bool bh_running; /* Protection from multiple */
int isr_overflow;
bool bh_requested;
-
+
int dcd_chkcount; /* check counts to prevent */
int cts_chkcount; /* too many IRQs if a signal */
int dsr_chkcount; /* is floating */
@@ -230,7 +230,7 @@ struct mgsl_struct {
DMABUFFERENTRY *tx_buffer_list; /* list of transmit buffer entries */
int start_tx_dma_buffer; /* tx dma buffer to start tx dma operation */
int current_tx_buffer; /* next tx dma buffer to be loaded */
-
+
unsigned char *intermediate_rxbuffer;
int num_tx_holding_buffers; /* number of tx holding buffer allocated */
@@ -259,11 +259,11 @@ struct mgsl_struct {
unsigned int io_base; /* base I/O address of adapter */
unsigned int io_addr_size; /* size of the I/O address range */
bool io_addr_requested; /* true if I/O address requested */
-
+
unsigned int irq_level; /* interrupt level */
unsigned long irq_flags;
bool irq_requested; /* true if IRQ requested */
-
+
unsigned int dma_level; /* DMA channel */
bool dma_requested; /* true if dma channel requested */
@@ -295,7 +295,7 @@ struct mgsl_struct {
bool loopmode_insert_requested;
bool loopmode_send_done_requested;
-
+
struct _input_signal_events input_signal_events;
/* generic HDLC device parts */
@@ -376,7 +376,7 @@ struct mgsl_struct {
#define DCR 0x06 /* DMA Control Register (shared) */
#define DACR 0x08 /* DMA Array count Register (shared) */
#define BDCR 0x12 /* Burst/Dwell Control Register (shared) */
-#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
+#define DIVR 0x14 /* DMA Interrupt Vector Register (shared) */
#define DICR 0x18 /* DMA Interrupt Control Register (shared) */
#define CDIR 0x1a /* Clear DMA Interrupt Register (shared) */
#define SDIR 0x1c /* Set DMA Interrupt Register (shared) */
@@ -486,7 +486,7 @@ struct mgsl_struct {
/*
* Bits for enabling and disabling IRQs in Interrupt Control Register (ICR)
*/
-
+
#define RECEIVE_STATUS BIT5
#define RECEIVE_DATA BIT4
#define TRANSMIT_STATUS BIT3
@@ -516,7 +516,7 @@ struct mgsl_struct {
#define usc_UnlatchRxstatusBits(a,b) usc_OutReg( (a), RCSR, (u16)((b) & RXSTATUS_ALL) )
/*
- * Values for setting transmit idle mode in
+ * Values for setting transmit idle mode in
* Transmit Control/status Register (TCSR)
*/
#define IDLEMODE_FLAGS 0x0000
@@ -552,7 +552,7 @@ struct mgsl_struct {
#define TXSTATUS_FIFO_EMPTY BIT0
#define TXSTATUS_ALL 0x00fa
#define usc_UnlatchTxstatusBits(a,b) usc_OutReg( (a), TCSR, (u16)((a)->tcsr_value + ((b) & 0x00FF)) )
-
+
#define MISCSTATUS_RXC_LATCHED BIT15
#define MISCSTATUS_RXC BIT14
@@ -865,7 +865,7 @@ static int debug_level;
static int maxframe[MAX_TOTAL_DEVICES];
static int txdmabufs[MAX_TOTAL_DEVICES];
static int txholdbufs[MAX_TOTAL_DEVICES];
-
+
module_param(break_on_load, bool, 0);
module_param(ttymajor, int, 0);
module_param_hw_array(io, int, ioport, NULL, 0);
@@ -967,7 +967,7 @@ static void ldisc_receive_buf(struct tty_struct *tty,
}
/* mgsl_stop() throttle (stop) transmitter
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -975,22 +975,22 @@ static void mgsl_stop(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_stop"))
return;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("mgsl_stop(%s)\n",info->device_name);
-
+ printk("mgsl_stop(%s)\n",info->device_name);
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (info->tx_enabled)
usc_stop_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
} /* end of mgsl_stop() */
/* mgsl_start() release (start) transmitter
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -998,18 +998,18 @@ static void mgsl_start(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_start"))
return;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
- printk("mgsl_start(%s)\n",info->device_name);
-
+ printk("mgsl_start(%s)\n",info->device_name);
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (!info->tx_enabled)
usc_start_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
} /* end of mgsl_start() */
/*
@@ -1023,7 +1023,7 @@ static int mgsl_bh_action(struct mgsl_struct *info)
{
unsigned long flags;
int rc = 0;
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (info->pending_bh & BH_RECEIVE) {
@@ -1042,9 +1042,9 @@ static int mgsl_bh_action(struct mgsl_struct *info)
info->bh_running = false;
info->bh_requested = false;
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
return rc;
}
@@ -1060,18 +1060,18 @@ static void mgsl_bh_handler(struct work_struct *work)
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_handler(%s) entry\n",
__FILE__,__LINE__,info->device_name);
-
+
info->bh_running = true;
while((action = mgsl_bh_action(info)) != 0) {
-
+
/* Process work item */
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_handler() work item action=%d\n",
__FILE__,__LINE__,action);
switch (action) {
-
+
case BH_RECEIVE:
mgsl_bh_receive(info);
break;
@@ -1101,7 +1101,7 @@ static void mgsl_bh_receive(struct mgsl_struct *info)
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_receive(%s)\n",
__FILE__,__LINE__,info->device_name);
-
+
do
{
if (info->rx_rcc_underrun) {
@@ -1118,7 +1118,7 @@ static void mgsl_bh_transmit(struct mgsl_struct *info)
{
struct tty_struct *tty = info->port.tty;
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_BH )
printk( "%s(%d):mgsl_bh_transmit() entry on %s\n",
__FILE__,__LINE__,info->device_name);
@@ -1148,7 +1148,7 @@ static void mgsl_bh_status(struct mgsl_struct *info)
}
/* mgsl_isr_receive_status()
- *
+ *
* Service a receive status interrupt. The type of status
* interrupt is indicated by the state of the RCSR.
* This is only used for HDLC mode.
@@ -1163,18 +1163,18 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info )
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_receive_status status=%04X\n",
__FILE__,__LINE__,status);
-
- if ( (status & RXSTATUS_ABORT_RECEIVED) &&
+
+ if ( (status & RXSTATUS_ABORT_RECEIVED) &&
info->loopmode_insert_requested &&
usc_loopmode_active(info) )
{
++info->icount.rxabort;
info->loopmode_insert_requested = false;
-
+
/* clear CMR:13 to start echoing RxD to TxD */
info->cmr_value &= ~BIT13;
usc_OutReg(info, CMR, info->cmr_value);
-
+
/* disable received abort irq (no longer required) */
usc_OutReg(info, RICR,
(usc_InReg(info, RICR) & ~RXSTATUS_ABORT_RECEIVED));
@@ -1199,12 +1199,12 @@ static void mgsl_isr_receive_status( struct mgsl_struct *info )
} /* end of mgsl_isr_receive_status() */
/* mgsl_isr_transmit_status()
- *
+ *
* Service a transmit status interrupt
* HDLC mode :end of transmit frame
* Async mode:all data is sent
* transmit status is indicated by bits in the TCSR.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -1212,13 +1212,13 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
{
u16 status = usc_InReg( info, TCSR );
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_transmit_status status=%04X\n",
__FILE__,__LINE__,status);
-
+
usc_ClearIrqPendingBits( info, TRANSMIT_STATUS );
usc_UnlatchTxstatusBits( info, status );
-
+
if ( status & (TXSTATUS_UNDERRUN | TXSTATUS_ABORT_SENT) )
{
/* finished sending HDLC abort. This may leave */
@@ -1229,7 +1229,7 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
usc_DmaCmd( info, DmaCmd_ResetTxChannel );
usc_RTCmd( info, RTCmd_PurgeTxFifo );
}
-
+
if ( status & TXSTATUS_EOF_SENT )
info->icount.txok++;
else if ( status & TXSTATUS_UNDERRUN )
@@ -1238,11 +1238,11 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
info->icount.txabort++;
else
info->icount.txunder++;
-
+
info->tx_active = false;
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- del_timer(&info->tx_timer);
-
+ del_timer(&info->tx_timer);
+
if ( info->drop_rts_on_tx_done ) {
usc_get_serial_signals( info );
if ( info->serial_signals & SerialSignal_RTS ) {
@@ -1255,7 +1255,7 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
- else
+ else
#endif
{
if (info->port.tty->stopped || info->port.tty->hw_stopped) {
@@ -1268,10 +1268,10 @@ static void mgsl_isr_transmit_status( struct mgsl_struct *info )
} /* end of mgsl_isr_transmit_status() */
/* mgsl_isr_io_pin()
- *
+ *
* Service an Input/Output pin interrupt. The type of
* interrupt is indicated by bits in the MISR
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -1280,10 +1280,10 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
struct mgsl_icount *icount;
u16 status = usc_InReg( info, MISR );
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_io_pin status=%04X\n",
__FILE__,__LINE__,status);
-
+
usc_ClearIrqPendingBits( info, IO_PIN );
usc_UnlatchIostatusBits( info, status );
@@ -1296,9 +1296,9 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
usc_DisablestatusIrqs(info,SICR_RI);
icount->rng++;
if ( status & MISCSTATUS_RI )
- info->input_signal_events.ri_up++;
+ info->input_signal_events.ri_up++;
else
- info->input_signal_events.ri_down++;
+ info->input_signal_events.ri_down++;
}
if (status & MISCSTATUS_DSR_LATCHED) {
if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
@@ -1353,7 +1353,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
tty_hangup(info->port.tty);
}
}
-
+
if (tty_port_cts_enabled(&info->port) &&
(status & MISCSTATUS_CTS_LATCHED) ) {
if (info->port.tty->hw_stopped) {
@@ -1378,7 +1378,7 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
}
info->pending_bh |= BH_STATUS;
-
+
/* for diagnostics set IRQ flag */
if ( status & MISCSTATUS_TXC_LATCHED ){
usc_OutReg( info, SICR,
@@ -1390,41 +1390,41 @@ static void mgsl_isr_io_pin( struct mgsl_struct *info )
} /* end of mgsl_isr_io_pin() */
/* mgsl_isr_transmit_data()
- *
+ *
* Service a transmit data interrupt (async mode only).
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
static void mgsl_isr_transmit_data( struct mgsl_struct *info )
{
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_transmit_data xmit_cnt=%d\n",
__FILE__,__LINE__,info->xmit_cnt);
-
+
usc_ClearIrqPendingBits( info, TRANSMIT_DATA );
-
+
if (info->port.tty->stopped || info->port.tty->hw_stopped) {
usc_stop_transmitter(info);
return;
}
-
+
if ( info->xmit_cnt )
usc_load_txfifo( info );
else
info->tx_active = false;
-
+
if (info->xmit_cnt < WAKEUP_CHARS)
info->pending_bh |= BH_TRANSMIT;
} /* end of mgsl_isr_transmit_data() */
/* mgsl_isr_receive_data()
- *
+ *
* Service a receive data interrupt. This occurs
* when operating in asynchronous interrupt transfer mode.
- * The receive data FIFO is flushed to the receive data buffers.
- *
+ * The receive data FIFO is flushed to the receive data buffers.
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -1435,13 +1435,13 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
int work = 0;
unsigned char DataByte;
struct mgsl_icount *icount = &info->icount;
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_receive_data\n",
__FILE__,__LINE__);
usc_ClearIrqPendingBits( info, RECEIVE_DATA );
-
+
/* select FIFO status for RICR readback */
usc_RCmd( info, RCmd_SelectRicrRxFifostatus );
@@ -1464,9 +1464,9 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) )
usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
-
+
icount->rx++;
-
+
flag = 0;
if ( status & (RXSTATUS_FRAMING_ERROR | RXSTATUS_PARITY_ERROR |
RXSTATUS_OVERRUN | RXSTATUS_BREAK_RECEIVED) ) {
@@ -1489,9 +1489,9 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
/* discard char if tty control flags say so */
if (status & info->ignore_status_mask)
continue;
-
+
status &= info->read_status_mask;
-
+
if (status & RXSTATUS_BREAK_RECEIVED) {
flag = TTY_BREAK;
if (info->port.flags & ASYNC_SAK)
@@ -1516,15 +1516,15 @@ static void mgsl_isr_receive_data( struct mgsl_struct *info )
__FILE__,__LINE__,icount->rx,icount->brk,
icount->parity,icount->frame,icount->overrun);
}
-
+
if(work)
tty_flip_buffer_push(&info->port);
}
/* mgsl_isr_misc()
- *
+ *
* Service a miscellaneous interrupt source.
- *
+ *
* Arguments: info pointer to device extension (instance data)
* Return Value: None
*/
@@ -1532,10 +1532,10 @@ static void mgsl_isr_misc( struct mgsl_struct *info )
{
u16 status = usc_InReg( info, MISR );
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_misc status=%04X\n",
__FILE__,__LINE__,status);
-
+
if ((status & MISCSTATUS_RCC_UNDERRUN) &&
(info->params.mode == MGSL_MODE_HDLC)) {
@@ -1560,7 +1560,7 @@ static void mgsl_isr_misc( struct mgsl_struct *info )
*
* Services undefined interrupt vectors from the
* USC. (hence this function SHOULD never be called)
- *
+ *
* Arguments: info pointer to device extension (instance data)
* Return Value: None
*/
@@ -1570,28 +1570,28 @@ static void mgsl_isr_null( struct mgsl_struct *info )
} /* end of mgsl_isr_null() */
/* mgsl_isr_receive_dma()
- *
+ *
* Service a receive DMA channel interrupt.
* For this driver there are two sources of receive DMA interrupts
* as identified in the Receive DMA mode Register (RDMR):
- *
+ *
* BIT3 EOA/EOL End of List, all receive buffers in receive
* buffer list have been filled (no more free buffers
* available). The DMA controller has shut down.
- *
+ *
* BIT2 EOB End of Buffer. This interrupt occurs when a receive
* DMA buffer is terminated in response to completion
* of a good frame or a frame with errors. The status
* of the frame is stored in the buffer entry in the
* list of receive buffer entries.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
static void mgsl_isr_receive_dma( struct mgsl_struct *info )
{
u16 status;
-
+
/* clear interrupt pending and IUS bit for Rx DMA IRQ */
usc_OutDmaReg( info, CDIR, BIT9 | BIT1 );
@@ -1599,12 +1599,12 @@ static void mgsl_isr_receive_dma( struct mgsl_struct *info )
/* This also clears the status bits. */
status = usc_InDmaReg( info, RDMR );
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):mgsl_isr_receive_dma(%s) status=%04X\n",
__FILE__,__LINE__,info->device_name,status);
-
+
info->pending_bh |= BH_RECEIVE;
-
+
if ( status & BIT3 ) {
info->rx_overflow = true;
info->icount.buf_overrun++;
@@ -1665,14 +1665,14 @@ static void mgsl_isr_transmit_dma( struct mgsl_struct *info )
} /* end of mgsl_isr_transmit_dma() */
/* mgsl_interrupt()
- *
+ *
* Interrupt service routine entry point.
- *
+ *
* Arguments:
- *
+ *
* irq interrupt number that caused interrupt
* dev_id device ID supplied during interrupt registration
- *
+ *
* Return Value: None
*/
static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
@@ -1681,7 +1681,7 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
u16 UscVector;
u16 DmaVector;
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)entry.\n",
__FILE__, __LINE__, info->irq_level);
@@ -1691,14 +1691,14 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
/* Read the interrupt vectors from hardware. */
UscVector = usc_InReg(info, IVR) >> 9;
DmaVector = usc_InDmaReg(info, DIVR);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s UscVector=%08X DmaVector=%08X\n",
__FILE__,__LINE__,info->device_name,UscVector,DmaVector);
-
+
if ( !UscVector && !DmaVector )
break;
-
+
/* Dispatch interrupt vector */
if ( UscVector )
(*UscIsrTable[UscVector])(info);
@@ -1715,13 +1715,13 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
break;
}
}
-
- /* Request bottom half processing if there's something
+
+ /* Request bottom half processing if there's something
* for it to do and the bh is not already running
*/
if ( info->pending_bh && !info->bh_running && !info->bh_requested ) {
- if ( debug_level >= DEBUG_LEVEL_ISR )
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s queueing bh task.\n",
__FILE__,__LINE__,info->device_name);
schedule_work(&info->task);
@@ -1729,8 +1729,8 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
}
spin_unlock(&info->irq_spinlock);
-
- if ( debug_level >= DEBUG_LEVEL_ISR )
+
+ if ( debug_level >= DEBUG_LEVEL_ISR )
printk(KERN_DEBUG "%s(%d):mgsl_interrupt(%d)exit.\n",
__FILE__, __LINE__, info->irq_level);
@@ -1738,9 +1738,9 @@ static irqreturn_t mgsl_interrupt(int dummy, void *dev_id)
} /* end of mgsl_interrupt() */
/* startup()
- *
+ *
* Initialize and start device.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error code
*/
@@ -1765,18 +1765,18 @@ static int startup(struct mgsl_struct * info)
}
info->pending_bh = 0;
-
+
memset(&info->icount, 0, sizeof(info->icount));
timer_setup(&info->tx_timer, mgsl_tx_timeout, 0);
-
+
/* Allocate and claim adapter resources */
retval = mgsl_claim_resources(info);
-
+
/* perform existence check and diagnostics */
if ( !retval )
retval = mgsl_adapter_test(info);
-
+
if ( retval ) {
if (capable(CAP_SYS_ADMIN) && info->port.tty)
set_bit(TTY_IO_ERROR, &info->port.tty->flags);
@@ -1863,20 +1863,20 @@ static void mgsl_program_hw(struct mgsl_struct *info)
unsigned long flags;
spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
usc_stop_receiver(info);
usc_stop_transmitter(info);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
-
+
if (info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ||
info->netcount)
usc_set_sync_mode(info);
else
usc_set_async_mode(info);
-
+
usc_set_serial_signals(info);
-
+
info->dcd_chkcount = 0;
info->cts_chkcount = 0;
info->ri_chkcount = 0;
@@ -1885,10 +1885,10 @@ static void mgsl_program_hw(struct mgsl_struct *info)
usc_EnableStatusIrqs(info,SICR_CTS+SICR_DSR+SICR_DCD+SICR_RI);
usc_EnableInterrupts(info, IO_PIN);
usc_get_serial_signals(info);
-
+
if (info->netcount || info->port.tty->termios.c_cflag & CREAD)
usc_start_receiver(info);
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
@@ -1901,11 +1901,11 @@ static void mgsl_change_params(struct mgsl_struct *info)
if (!info->port.tty)
return;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_change_params(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
cflag = info->port.tty->termios.c_cflag;
/* if B0 rate (hangup) specified then negate RTS and DTR */
@@ -1914,9 +1914,9 @@ static void mgsl_change_params(struct mgsl_struct *info)
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
else
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-
+
/* byte size and parity */
-
+
switch (cflag & CSIZE) {
case CS5: info->params.data_bits = 5; break;
case CS6: info->params.data_bits = 6; break;
@@ -1925,7 +1925,7 @@ static void mgsl_change_params(struct mgsl_struct *info)
/* Never happens, but GCC is too dumb to figure it out */
default: info->params.data_bits = 7; break;
}
-
+
if (cflag & CSTOPB)
info->params.stop_bits = 2;
else
@@ -1946,7 +1946,7 @@ static void mgsl_change_params(struct mgsl_struct *info)
/* calculate number of jiffies to transmit a full
* FIFO (32 bytes) at specified data rate
*/
- bits_per_char = info->params.data_bits +
+ bits_per_char = info->params.data_bits +
info->params.stop_bits + 1;
/* if port data rate is set to 460800 or less then
@@ -1955,9 +1955,9 @@ static void mgsl_change_params(struct mgsl_struct *info)
*/
if (info->params.data_rate <= 460800)
info->params.data_rate = tty_get_baud_rate(info->port.tty);
-
+
if ( info->params.data_rate ) {
- info->timeout = (32*HZ*bits_per_char) /
+ info->timeout = (32*HZ*bits_per_char) /
info->params.data_rate;
}
info->timeout += HZ/50; /* Add .02 seconds of slop */
@@ -1966,18 +1966,18 @@ static void mgsl_change_params(struct mgsl_struct *info)
tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
/* process tty input control flags */
-
+
info->read_status_mask = RXSTATUS_OVERRUN;
if (I_INPCK(info->port.tty))
info->read_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
info->read_status_mask |= RXSTATUS_BREAK_RECEIVED;
-
+
if (I_IGNPAR(info->port.tty))
info->ignore_status_mask |= RXSTATUS_PARITY_ERROR | RXSTATUS_FRAMING_ERROR;
if (I_IGNBRK(info->port.tty)) {
info->ignore_status_mask |= RXSTATUS_BREAK_RECEIVED;
- /* If ignoring parity and break indicators, ignore
+ /* If ignoring parity and break indicators, ignore
* overruns too. (For real raw support).
*/
if (I_IGNPAR(info->port.tty))
@@ -1989,12 +1989,12 @@ static void mgsl_change_params(struct mgsl_struct *info)
} /* end of mgsl_change_params() */
/* mgsl_put_char()
- *
+ *
* Add a character to the transmit buffer.
- *
+ *
* Arguments: tty pointer to tty information structure
* ch character to add to transmit buffer
- *
+ *
* Return Value: None
*/
static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
@@ -2006,8 +2006,8 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
if (debug_level >= DEBUG_LEVEL_INFO) {
printk(KERN_DEBUG "%s(%d):mgsl_put_char(%d) on %s\n",
__FILE__, __LINE__, ch, info->device_name);
- }
-
+ }
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_put_char"))
return 0;
@@ -2015,7 +2015,7 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
return 0;
spin_lock_irqsave(&info->irq_spinlock, flags);
-
+
if ((info->params.mode == MGSL_MODE_ASYNC ) || !info->tx_active) {
if (info->xmit_cnt < SERIAL_XMIT_SIZE - 1) {
info->xmit_buf[info->xmit_head++] = ch;
@@ -2026,14 +2026,14 @@ static int mgsl_put_char(struct tty_struct *tty, unsigned char ch)
}
spin_unlock_irqrestore(&info->irq_spinlock, flags);
return ret;
-
+
} /* end of mgsl_put_char() */
/* mgsl_flush_chars()
- *
+ *
* Enable transmitter so remaining characters in the
* transmit buffer are sent.
- *
+ *
* Arguments: tty pointer to tty information structure
* Return Value: None
*/
@@ -2041,11 +2041,11 @@ static void mgsl_flush_chars(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_flush_chars() entry on %s xmit_cnt=%d\n",
__FILE__,__LINE__,info->device_name,info->xmit_cnt);
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_chars"))
return;
@@ -2058,7 +2058,7 @@ static void mgsl_flush_chars(struct tty_struct *tty)
__FILE__,__LINE__,info->device_name );
spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
if (!info->tx_active) {
if ( (info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW) && info->xmit_cnt ) {
@@ -2070,21 +2070,21 @@ static void mgsl_flush_chars(struct tty_struct *tty)
}
usc_start_transmitter(info);
}
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
} /* end of mgsl_flush_chars() */
/* mgsl_write()
- *
+ *
* Send a block of data
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty information structure
* buf pointer to buffer containing send data
* count size of send data in bytes
- *
+ *
* Return Value: number of characters written
*/
static int mgsl_write(struct tty_struct * tty,
@@ -2093,11 +2093,11 @@ static int mgsl_write(struct tty_struct * tty,
int c, ret = 0;
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_write(%s) count=%d\n",
__FILE__,__LINE__,info->device_name,count);
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_write"))
goto cleanup;
@@ -2136,7 +2136,7 @@ static int mgsl_write(struct tty_struct * tty,
spin_unlock_irqrestore(&info->irq_spinlock,flags);
goto cleanup;
}
-
+
/* if operating in HDLC LoopMode and the adapter */
/* has yet to be inserted into the loop, we can't */
/* transmit */
@@ -2152,7 +2152,7 @@ static int mgsl_write(struct tty_struct * tty,
/* Send accumulated from send_char() calls */
/* as frame and wait before accepting more data. */
ret = 0;
-
+
/* copy data from circular xmit_buf to */
/* transmit DMA buffer. */
mgsl_load_tx_dma_buffer(info,
@@ -2187,27 +2187,27 @@ static int mgsl_write(struct tty_struct * tty,
count -= c;
ret += c;
}
- }
-
+ }
+
if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) {
spin_lock_irqsave(&info->irq_spinlock,flags);
if (!info->tx_active)
usc_start_transmitter(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-cleanup:
+cleanup:
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_write(%s) returning=%d\n",
__FILE__,__LINE__,info->device_name,ret);
-
+
return ret;
-
+
} /* end of mgsl_write() */
/* mgsl_write_room()
*
* Return the count of free bytes in transmit buffer
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2215,17 +2215,17 @@ static int mgsl_write_room(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
int ret;
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_write_room"))
return 0;
ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1;
if (ret < 0)
ret = 0;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_write_room(%s)=%d\n",
__FILE__,__LINE__, info->device_name,ret );
-
+
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
/* operating in synchronous (frame oriented) mode */
@@ -2234,33 +2234,33 @@ static int mgsl_write_room(struct tty_struct *tty)
else
return HDLC_MAX_FRAME_SIZE;
}
-
+
return ret;
-
+
} /* end of mgsl_write_room() */
/* mgsl_chars_in_buffer()
*
* Return the count of bytes in transmit buffer
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
static int mgsl_chars_in_buffer(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_chars_in_buffer(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_chars_in_buffer"))
return 0;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_chars_in_buffer(%s)=%d\n",
__FILE__,__LINE__, info->device_name,info->xmit_cnt );
-
+
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
/* operating in synchronous (frame oriented) mode */
@@ -2269,14 +2269,14 @@ static int mgsl_chars_in_buffer(struct tty_struct *tty)
else
return 0;
}
-
+
return info->xmit_cnt;
} /* end of mgsl_chars_in_buffer() */
/* mgsl_flush_buffer()
*
* Discard all data in the send buffer
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2284,26 +2284,26 @@ static void mgsl_flush_buffer(struct tty_struct *tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_flush_buffer(%s) entry\n",
__FILE__,__LINE__, info->device_name );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_flush_buffer"))
return;
-
- spin_lock_irqsave(&info->irq_spinlock,flags);
+
+ spin_lock_irqsave(&info->irq_spinlock,flags);
info->xmit_cnt = info->xmit_head = info->xmit_tail = 0;
- del_timer(&info->tx_timer);
+ del_timer(&info->tx_timer);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
tty_wakeup(tty);
}
/* mgsl_send_xchar()
*
* Send a high-priority XON/XOFF character
- *
+ *
* Arguments: tty pointer to tty info structure
* ch character to send
* Return Value: None
@@ -2316,7 +2316,7 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch)
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_send_xchar(%s,%d)\n",
__FILE__,__LINE__, info->device_name, ch );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_send_xchar"))
return;
@@ -2331,9 +2331,9 @@ static void mgsl_send_xchar(struct tty_struct *tty, char ch)
} /* end of mgsl_send_xchar() */
/* mgsl_throttle()
- *
+ *
* Signal remote device to throttle send data (our receive data)
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2341,14 +2341,14 @@ static void mgsl_throttle(struct tty_struct * tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_throttle(%s) entry\n",
__FILE__,__LINE__, info->device_name );
if (mgsl_paranoia_check(info, tty->name, "mgsl_throttle"))
return;
-
+
if (I_IXOFF(tty))
mgsl_send_xchar(tty, STOP_CHAR(tty));
@@ -2361,9 +2361,9 @@ static void mgsl_throttle(struct tty_struct * tty)
} /* end of mgsl_throttle() */
/* mgsl_unthrottle()
- *
+ *
* Signal remote device to stop throttling send data (our receive data)
- *
+ *
* Arguments: tty pointer to tty info structure
* Return Value: None
*/
@@ -2371,14 +2371,14 @@ static void mgsl_unthrottle(struct tty_struct * tty)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_unthrottle(%s) entry\n",
__FILE__,__LINE__, info->device_name );
if (mgsl_paranoia_check(info, tty->name, "mgsl_unthrottle"))
return;
-
+
if (I_IXOFF(tty)) {
if (info->x_char)
info->x_char = 0;
@@ -2392,26 +2392,26 @@ static void mgsl_unthrottle(struct tty_struct * tty)
usc_set_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
}
-
+
} /* end of mgsl_unthrottle() */
/* mgsl_get_stats()
- *
+ *
* get the current serial parameters information
*
* Arguments: info pointer to device instance data
* user_icount pointer to buffer to hold returned stats
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *user_icount)
{
int err;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_params(%s)\n",
__FILE__,__LINE__, info->device_name);
-
+
if (!user_icount) {
memset(&info->icount, 0, sizeof(info->icount));
} else {
@@ -2421,18 +2421,18 @@ static int mgsl_get_stats(struct mgsl_struct * info, struct mgsl_icount __user *
if (err)
return -EFAULT;
}
-
+
return 0;
-
+
} /* end of mgsl_get_stats() */
/* mgsl_get_params()
- *
+ *
* get the current serial parameters information
*
* Arguments: info pointer to device instance data
* user_params pointer to buffer to hold returned params
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_params)
@@ -2441,7 +2441,7 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_params(%s)\n",
__FILE__,__LINE__, info->device_name);
-
+
mutex_lock(&info->port.mutex);
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
mutex_unlock(&info->port.mutex);
@@ -2451,17 +2451,17 @@ static int mgsl_get_params(struct mgsl_struct * info, MGSL_PARAMS __user *user_p
__FILE__,__LINE__,info->device_name);
return -EFAULT;
}
-
+
return 0;
-
+
} /* end of mgsl_get_params() */
/* mgsl_set_params()
- *
+ *
* set the serial parameters
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* new_params user buffer containing new serial params
*
@@ -2472,7 +2472,7 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa
unsigned long flags;
MGSL_PARAMS tmp_params;
int err;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_set_params %s\n", __FILE__,__LINE__,
info->device_name );
@@ -2483,36 +2483,36 @@ static int mgsl_set_params(struct mgsl_struct * info, MGSL_PARAMS __user *new_pa
__FILE__,__LINE__,info->device_name);
return -EFAULT;
}
-
+
mutex_lock(&info->port.mutex);
spin_lock_irqsave(&info->irq_spinlock,flags);
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
mgsl_change_params(info);
mutex_unlock(&info->port.mutex);
-
+
return 0;
-
+
} /* end of mgsl_set_params() */
/* mgsl_get_txidle()
- *
+ *
* get the current transmit idle mode
*
* Arguments: info pointer to device instance data
* idle_mode pointer to buffer to hold returned idle mode
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
{
int err;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_get_txidle(%s)=%d\n",
__FILE__,__LINE__, info->device_name, info->idle_mode);
-
+
COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
if (err) {
if ( debug_level >= DEBUG_LEVEL_INFO )
@@ -2520,13 +2520,13 @@ static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
__FILE__,__LINE__,info->device_name);
return -EFAULT;
}
-
+
return 0;
-
+
} /* end of mgsl_get_txidle() */
/* mgsl_set_txidle() service ioctl to set transmit idle mode
- *
+ *
* Arguments: info pointer to device instance data
* idle_mode new idle mode
*
@@ -2535,25 +2535,25 @@ static int mgsl_get_txidle(struct mgsl_struct * info, int __user *idle_mode)
static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_set_txidle(%s,%d)\n", __FILE__,__LINE__,
info->device_name, idle_mode );
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
info->idle_mode = idle_mode;
usc_set_txidle( info );
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_set_txidle() */
/* mgsl_txenable()
- *
+ *
* enable or disable the transmitter
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* enable 1 = enable, 0 = disable
*
@@ -2562,11 +2562,11 @@ static int mgsl_set_txidle(struct mgsl_struct * info, int idle_mode)
static int mgsl_txenable(struct mgsl_struct * info, int enable)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_txenable(%s,%d)\n", __FILE__,__LINE__,
info->device_name, enable);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( enable ) {
if ( !info->tx_enabled ) {
@@ -2588,22 +2588,22 @@ static int mgsl_txenable(struct mgsl_struct * info, int enable)
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_txenable() */
/* mgsl_txabort() abort send HDLC frame
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_txabort(struct mgsl_struct * info)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_txabort(%s)\n", __FILE__,__LINE__,
info->device_name);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC )
{
@@ -2614,11 +2614,11 @@ static int mgsl_txabort(struct mgsl_struct * info)
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_txabort() */
/* mgsl_rxenable() enable or disable the receiver
- *
+ *
* Arguments: info pointer to device instance data
* enable 1 = enable, 0 = disable
* Return Value: 0 if success, otherwise error code
@@ -2626,11 +2626,11 @@ static int mgsl_txabort(struct mgsl_struct * info)
static int mgsl_rxenable(struct mgsl_struct * info, int enable)
{
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_rxenable(%s,%d)\n", __FILE__,__LINE__,
info->device_name, enable);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if ( enable ) {
if ( !info->rx_enabled )
@@ -2641,11 +2641,11 @@ static int mgsl_rxenable(struct mgsl_struct * info, int enable)
}
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_rxenable() */
/* mgsl_wait_event() wait for specified event to occur
- *
+ *
* Arguments: info pointer to device instance data
* mask pointer to bitmask of events to wait for
* Return Value: 0 if successful and bit mask updated with
@@ -2667,7 +2667,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
if (rc) {
return -EFAULT;
}
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_wait_event(%s,%d)\n", __FILE__,__LINE__,
info->device_name, mask);
@@ -2690,7 +2690,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
/* save current irq counts */
cprev = info->icount;
oldsigs = info->input_signal_events;
-
+
/* enable hunt and idle irqs if needed */
if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
u16 oldreg = usc_InReg(info,RICR);
@@ -2700,12 +2700,12 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
if (oldreg != newreg)
usc_OutReg(info, RICR, newreg);
}
-
+
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&info->event_wait_q, &wait);
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
for(;;) {
schedule();
@@ -2713,7 +2713,7 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
rc = -ERESTARTSYS;
break;
}
-
+
/* get current irq counts */
spin_lock_irqsave(&info->irq_spinlock,flags);
cnow = info->icount;
@@ -2749,11 +2749,11 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
(cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
if (events)
break;
-
+
cprev = cnow;
oldsigs = newsigs;
}
-
+
remove_wait_queue(&info->event_wait_q, &wait);
set_current_state(TASK_RUNNING);
@@ -2769,9 +2769,9 @@ static int mgsl_wait_event(struct mgsl_struct * info, int __user * mask_ptr)
exit:
if ( rc == 0 )
PUT_USER(rc, events, mask_ptr);
-
+
return rc;
-
+
} /* end of mgsl_wait_event() */
static int modem_input_wait(struct mgsl_struct *info,int arg)
@@ -2887,22 +2887,22 @@ static int mgsl_break(struct tty_struct *tty, int break_state)
{
struct mgsl_struct * info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_break(%s,%d)\n",
__FILE__,__LINE__, info->device_name, break_state);
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_break"))
return -EINVAL;
spin_lock_irqsave(&info->irq_spinlock,flags);
if (break_state == -1)
usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) | BIT7));
- else
+ else
usc_OutReg(info,IOCR,(u16)(usc_InReg(info,IOCR) & ~BIT7));
spin_unlock_irqrestore(&info->irq_spinlock,flags);
return 0;
-
+
} /* end of mgsl_break() */
/*
@@ -2938,24 +2938,24 @@ static int msgl_get_icount(struct tty_struct *tty,
}
/* mgsl_ioctl() Service an IOCTL request
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty instance data
* cmd IOCTL command code
* arg command argument/context
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int mgsl_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct mgsl_struct * info = tty->driver_data;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_ioctl %s cmd=%08X\n", __FILE__,__LINE__,
info->device_name, cmd );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_ioctl"))
return -ENODEV;
@@ -2971,7 +2971,7 @@ static int mgsl_ioctl(struct tty_struct *tty,
static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigned long arg)
{
void __user *argp = (void __user *)arg;
-
+
switch (cmd) {
case MGSL_IOCGPARAMS:
return mgsl_get_params(info, argp);
@@ -3006,25 +3006,25 @@ static int mgsl_ioctl_common(struct mgsl_struct *info, unsigned int cmd, unsigne
}
/* mgsl_set_termios()
- *
+ *
* Set new termios settings
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty structure
* termios pointer to buffer to hold returned old termios
- *
+ *
* Return Value: None
*/
static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
{
struct mgsl_struct *info = tty->driver_data;
unsigned long flags;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_set_termios %s\n", __FILE__,__LINE__,
tty->driver->name );
-
+
mgsl_change_params(info);
/* Handle transition to B0 status */
@@ -3054,15 +3054,15 @@ static void mgsl_set_termios(struct tty_struct *tty, struct ktermios *old_termio
} /* end of mgsl_set_termios() */
/* mgsl_close()
- *
+ *
* Called when port is closed. Wait for remaining data to be
* sent. Disable port and free resources.
- *
+ *
* Arguments:
- *
+ *
* tty pointer to open tty structure
* filp pointer to open file object
- *
+ *
* Return Value: None
*/
static void mgsl_close(struct tty_struct *tty, struct file * filp)
@@ -3071,7 +3071,7 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
if (mgsl_paranoia_check(info, tty->name, "mgsl_close"))
return;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) entry, count=%d\n",
__FILE__,__LINE__, info->device_name, info->port.count);
@@ -3087,13 +3087,13 @@ static void mgsl_close(struct tty_struct *tty, struct file * filp)
shutdown(info);
mutex_unlock(&info->port.mutex);
- tty_port_close_end(&info->port, tty);
+ tty_port_close_end(&info->port, tty);
info->port.tty = NULL;
-cleanup:
+cleanup:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_close(%s) exit, count=%d\n", __FILE__,__LINE__,
tty->driver->name, info->port.count);
-
+
} /* end of mgsl_close() */
/* mgsl_wait_until_sent()
@@ -3131,7 +3131,7 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
* send a character, and make it at least 1. The check
* interval should also be less than the timeout.
* Note: use tight timings here to satisfy the NIST-PCTS.
- */
+ */
if ( info->params.data_rate ) {
char_time = info->timeout/(32 * 5);
@@ -3139,10 +3139,10 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
char_time++;
} else
char_time = 1;
-
+
if (timeout)
char_time = min_t(unsigned long, char_time, timeout);
-
+
if ( info->params.mode == MGSL_MODE_HDLC ||
info->params.mode == MGSL_MODE_RAW ) {
while (info->tx_active) {
@@ -3162,12 +3162,12 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
break;
}
}
-
+
exit:
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_wait_until_sent(%s) exit\n",
__FILE__,__LINE__, info->device_name );
-
+
} /* end of mgsl_wait_until_sent() */
/* mgsl_hangup()
@@ -3181,23 +3181,23 @@ static void mgsl_wait_until_sent(struct tty_struct *tty, int timeout)
static void mgsl_hangup(struct tty_struct *tty)
{
struct mgsl_struct * info = tty->driver_data;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_hangup(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
if (mgsl_paranoia_check(info, tty->name, "mgsl_hangup"))
return;
mgsl_flush_buffer(tty);
shutdown(info);
-
- info->port.count = 0;
+
+ info->port.count = 0;
tty_port_set_active(&info->port, 0);
info->port.tty = NULL;
wake_up_interruptible(&info->port.open_wait);
-
+
} /* end of mgsl_hangup() */
/*
@@ -3210,7 +3210,7 @@ static int carrier_raised(struct tty_port *port)
{
unsigned long flags;
struct mgsl_struct *info = container_of(port, struct mgsl_struct, port);
-
+
spin_lock_irqsave(&info->irq_spinlock, flags);
usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock, flags);
@@ -3233,16 +3233,16 @@ static void dtr_rts(struct tty_port *port, int on)
/* block_til_ready()
- *
+ *
* Block the current process until the specified port
* is ready to be opened.
- *
+ *
* Arguments:
- *
+ *
* tty pointer to tty info structure
* filp pointer to open file object
* info pointer to device instance data
- *
+ *
* Return Value: 0 if success, otherwise error code
*/
static int block_til_ready(struct tty_struct *tty, struct file * filp,
@@ -3254,7 +3254,7 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
unsigned long flags;
int dcd;
struct tty_port *port = &info->port;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready on %s\n",
__FILE__,__LINE__, tty->driver->name );
@@ -3274,10 +3274,10 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
* mgsl_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
-
+
retval = 0;
add_wait_queue(&port->open_wait, &wait);
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready before block on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
@@ -3307,33 +3307,33 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp,
retval = -ERESTARTSYS;
break;
}
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
-
+
tty_unlock(tty);
schedule();
tty_lock(tty);
}
-
+
set_current_state(TASK_RUNNING);
remove_wait_queue(&port->open_wait, &wait);
-
+
/* FIXME: Racy on hangup during close wait */
if (!tty_hung_up_p(filp))
port->count++;
port->blocked_open--;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):block_til_ready after blocking on %s count=%d\n",
__FILE__,__LINE__, tty->driver->name, port->count );
-
+
if (!retval)
tty_port_set_active(port, 1);
-
+
return retval;
-
+
} /* end of block_til_ready() */
static int mgsl_install(struct tty_driver *driver, struct tty_struct *tty)
@@ -3376,7 +3376,7 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
int retval;
info->port.tty = tty;
-
+
if (debug_level >= DEBUG_LEVEL_INFO)
printk("%s(%d):mgsl_open(%s), old ref count = %d\n",
__FILE__,__LINE__,tty->driver->name, info->port.count);
@@ -3411,17 +3411,17 @@ static int mgsl_open(struct tty_struct *tty, struct file * filp)
printk("%s(%d):mgsl_open(%s) success\n",
__FILE__,__LINE__, info->device_name);
retval = 0;
-
-cleanup:
+
+cleanup:
if (retval) {
if (tty->count == 1)
info->port.tty = NULL; /* tty layer will release tty struct */
if(info->port.count)
info->port.count--;
}
-
+
return retval;
-
+
} /* end of mgsl_open() */
/*
@@ -3439,7 +3439,7 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
info->phys_memory_base, info->phys_lcr_base);
} else {
seq_printf(m, "%s:(E)ISA io:%04X irq:%d dma:%d",
- info->device_name, info->io_base,
+ info->device_name, info->io_base,
info->irq_level, info->dma_level);
}
@@ -3447,7 +3447,7 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_get_serial_signals(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
stat_buf[0] = 0;
stat_buf[1] = 0;
if (info->serial_signals & SerialSignal_RTS)
@@ -3491,16 +3491,16 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
if (info->icount.overrun)
seq_printf(m, " oe:%d", info->icount.overrun);
}
-
+
/* Append serial signal status to end */
seq_printf(m, " %s\n", stat_buf+1);
-
+
seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
info->tx_active,info->bh_requested,info->bh_running,
info->pending_bh);
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
- {
+ {
u16 Tcsr = usc_InReg( info, TCSR );
u16 Tdmr = usc_InDmaReg( info, TDMR );
u16 Ticr = usc_InReg( info, TICR );
@@ -3523,9 +3523,9 @@ static inline void line_info(struct seq_file *m, struct mgsl_struct *info)
static int mgsl_proc_show(struct seq_file *m, void *v)
{
struct mgsl_struct *info;
-
+
seq_printf(m, "synclink driver:%s\n", driver_version);
-
+
info = mgsl_device_list;
while( info ) {
line_info(m, info);
@@ -3535,10 +3535,10 @@ static int mgsl_proc_show(struct seq_file *m, void *v)
}
/* mgsl_allocate_dma_buffers()
- *
+ *
* Allocate and format DMA buffers (ISA adapter)
* or format shared memory buffers (PCI adapter).
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error
*/
@@ -3595,12 +3595,12 @@ static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
info->tx_buffer_count = info->num_tx_dma_buffers * BuffersPerFrame;
info->rx_buffer_count = (BuffersPerFrame * MAXRXFRAMES) + 6;
-
- /*
- * limit total TxBuffers & RxBuffers to 62 4K total
- * (ala PCI Allocation)
+
+ /*
+ * limit total TxBuffers & RxBuffers to 62 4K total
+ * (ala PCI Allocation)
*/
-
+
if ( (info->tx_buffer_count + info->rx_buffer_count) > 62 )
info->rx_buffer_count = 62 - info->tx_buffer_count;
@@ -3609,16 +3609,16 @@ static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("%s(%d):Allocating %d TX and %d RX DMA buffers.\n",
__FILE__,__LINE__, info->tx_buffer_count,info->rx_buffer_count);
-
+
if ( mgsl_alloc_buffer_list_memory( info ) < 0 ||
- mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
- mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
+ mgsl_alloc_frame_memory(info, info->rx_buffer_list, info->rx_buffer_count) < 0 ||
+ mgsl_alloc_frame_memory(info, info->tx_buffer_list, info->tx_buffer_count) < 0 ||
mgsl_alloc_intermediate_rxbuffer_memory(info) < 0 ||
mgsl_alloc_intermediate_txbuffer_memory(info) < 0 ) {
printk("%s(%d):Can't allocate DMA buffer memory\n",__FILE__,__LINE__);
return -ENOMEM;
}
-
+
mgsl_reset_rx_dma_buffers( info );
mgsl_reset_tx_dma_buffers( info );
@@ -3628,24 +3628,24 @@ static int mgsl_allocate_dma_buffers(struct mgsl_struct *info)
/*
* mgsl_alloc_buffer_list_memory()
- *
+ *
* Allocate a common DMA buffer for use as the
* receive and transmit buffer lists.
- *
+ *
* A buffer list is a set of buffer entries where each entry contains
* a pointer to an actual buffer and a pointer to the next buffer entry
* (plus some other info about the buffer).
- *
+ *
* The buffer entries for a list are built to form a circular list so
* that when the entire list has been traversed you start back at the
* beginning.
- *
+ *
* This function allocates memory for just the buffer entries.
* The links (pointer to next entry) are filled in with the physical
* address of the next entry so the adapter can navigate the list
* using bus master DMA. The pointers to the actual buffers are filled
* out later when the actual buffers are allocated.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise error
*/
@@ -3727,7 +3727,7 @@ static int mgsl_alloc_buffer_list_memory( struct mgsl_struct *info )
/* Free DMA buffers allocated for use as the
* receive and transmit buffer lists.
* Warning:
- *
+ *
* The data transfer buffers associated with the buffer list
* MUST be freed before freeing the buffer list itself because
* the buffer list contains the information necessary to free
@@ -3737,7 +3737,7 @@ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
{
if (info->buffer_list && info->bus_type != MGSL_BUS_TYPE_PCI)
dma_free_coherent(NULL, BUFFERLISTSIZE, info->buffer_list, info->buffer_list_dma_addr);
-
+
info->buffer_list = NULL;
info->rx_buffer_list = NULL;
info->tx_buffer_list = NULL;
@@ -3746,18 +3746,18 @@ static void mgsl_free_buffer_list_memory( struct mgsl_struct *info )
/*
* mgsl_alloc_frame_memory()
- *
+ *
* Allocate the frame DMA buffers used by the specified buffer list.
* Each DMA buffer will be one memory page in size. This is necessary
* because memory can fragment enough that it may be impossible
* contiguous pages.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* BufferList pointer to list of buffer entries
* Buffercount count of buffer entries in buffer list
- *
+ *
* Return Value: 0 if success, otherwise -ENOMEM
*/
static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *BufferList,int Buffercount)
@@ -3789,16 +3789,16 @@ static int mgsl_alloc_frame_memory(struct mgsl_struct *info,DMABUFFERENTRY *Buff
/*
* mgsl_free_frame_memory()
- *
+ *
* Free the buffers associated with
* each buffer entry of a buffer list.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* BufferList pointer to list of buffer entries
* Buffercount count of buffer entries in buffer list
- *
+ *
* Return Value: None
*/
static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *BufferList, int Buffercount)
@@ -3818,9 +3818,9 @@ static void mgsl_free_frame_memory(struct mgsl_struct *info, DMABUFFERENTRY *Buf
} /* end of mgsl_free_frame_memory() */
/* mgsl_free_dma_buffers()
- *
+ *
* Free DMA buffers
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -3835,14 +3835,14 @@ static void mgsl_free_dma_buffers( struct mgsl_struct *info )
/*
* mgsl_alloc_intermediate_rxbuffer_memory()
- *
+ *
* Allocate a buffer large enough to hold max_frame_size. This buffer
* is used to pass an assembled frame to the line discipline.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
- *
+ *
* Return Value: 0 if success, otherwise -ENOMEM
*/
static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
@@ -3863,12 +3863,12 @@ static int mgsl_alloc_intermediate_rxbuffer_memory(struct mgsl_struct *info)
/*
* mgsl_free_intermediate_rxbuffer_memory()
- *
- *
+ *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
- *
+ *
* Return Value: None
*/
static void mgsl_free_intermediate_rxbuffer_memory(struct mgsl_struct *info)
@@ -4032,7 +4032,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
return -ENODEV;
}
info->io_addr_requested = true;
-
+
if ( request_irq(info->irq_level,mgsl_interrupt,info->irq_flags,
info->device_name, info ) < 0 ) {
printk( "%s(%d):Can't request interrupt on device %s IRQ=%d\n",
@@ -4040,7 +4040,7 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
goto errout;
}
info->irq_requested = true;
-
+
if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
if (request_mem_region(info->phys_memory_base,0x40000,"synclink") == NULL) {
printk( "%s(%d):mem addr conflict device %s Addr=%08X\n",
@@ -4062,13 +4062,13 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
goto errout;
}
-
+
if ( !mgsl_memory_test(info) ) {
printk( "%s(%d):Failed shared memory test %s MemAddr=%08X\n",
__FILE__,__LINE__,info->device_name, info->phys_memory_base );
goto errout;
}
-
+
info->lcr_base = ioremap_nocache(info->phys_lcr_base,
PAGE_SIZE);
if (!info->lcr_base) {
@@ -4077,10 +4077,10 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
goto errout;
}
info->lcr_base += info->lcr_offset;
-
+
} else {
/* claim DMA channel */
-
+
if (request_dma(info->dma_level,info->device_name) < 0){
printk( "%s(%d):Can't request DMA channel on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
@@ -4088,17 +4088,17 @@ static int mgsl_claim_resources(struct mgsl_struct *info)
}
info->dma_requested = true;
- /* ISA adapter uses bus master DMA */
+ /* ISA adapter uses bus master DMA */
set_dma_mode(info->dma_level,DMA_MODE_CASCADE);
enable_dma(info->dma_level);
}
-
+
if ( mgsl_allocate_dma_buffers(info) < 0 ) {
printk( "%s(%d):Can't allocate DMA buffers on device %s DMA=%d\n",
__FILE__,__LINE__,info->device_name, info->dma_level );
goto errout;
- }
-
+ }
+
return 0;
errout:
mgsl_release_resources(info);
@@ -4111,7 +4111,7 @@ static void mgsl_release_resources(struct mgsl_struct *info)
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_release_resources(%s) entry\n",
__FILE__,__LINE__,info->device_name );
-
+
if ( info->irq_requested ) {
free_irq(info->irq_level, info);
info->irq_requested = false;
@@ -4124,7 +4124,7 @@ static void mgsl_release_resources(struct mgsl_struct *info)
mgsl_free_dma_buffers(info);
mgsl_free_intermediate_rxbuffer_memory(info);
mgsl_free_intermediate_txbuffer_memory(info);
-
+
if ( info->io_addr_requested ) {
release_region(info->io_base,info->io_addr_size);
info->io_addr_requested = false;
@@ -4145,18 +4145,18 @@ static void mgsl_release_resources(struct mgsl_struct *info)
iounmap(info->lcr_base - info->lcr_offset);
info->lcr_base = NULL;
}
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_release_resources(%s) exit\n",
__FILE__,__LINE__,info->device_name );
-
+
} /* end of mgsl_release_resources() */
/* mgsl_add_device()
- *
+ *
* Add the specified device instance data structure to the
* global linked list of devices and increment the device count.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -4165,7 +4165,7 @@ static void mgsl_add_device( struct mgsl_struct *info )
info->next_device = NULL;
info->line = mgsl_device_count;
sprintf(info->device_name,"ttySL%d",info->line);
-
+
if (info->line < MAX_TOTAL_DEVICES) {
if (maxframe[info->line])
info->max_frame_size = maxframe[info->line];
@@ -4186,21 +4186,21 @@ static void mgsl_add_device( struct mgsl_struct *info )
}
mgsl_device_count++;
-
+
if ( !mgsl_device_list )
mgsl_device_list = info;
- else {
+ else {
struct mgsl_struct *current_dev = mgsl_device_list;
while( current_dev->next_device )
current_dev = current_dev->next_device;
current_dev->next_device = info;
}
-
+
if ( info->max_frame_size < 4096 )
info->max_frame_size = 4096;
else if ( info->max_frame_size > 65535 )
info->max_frame_size = 65535;
-
+
if ( info->bus_type == MGSL_BUS_TYPE_PCI ) {
printk( "SyncLink PCI v%d %s: IO=%04X IRQ=%d Mem=%08X,%08X MaxFrameSize=%u\n",
info->hw_version + 1, info->device_name, info->io_base, info->irq_level,
@@ -4225,19 +4225,19 @@ static const struct tty_port_operations mgsl_port_ops = {
/* mgsl_allocate_device()
- *
+ *
* Allocate and initialize a device instance structure
- *
+ *
* Arguments: none
* Return Value: pointer to mgsl_struct if success, otherwise NULL
*/
static struct mgsl_struct* mgsl_allocate_device(void)
{
struct mgsl_struct *info;
-
+
info = kzalloc(sizeof(struct mgsl_struct),
GFP_KERNEL);
-
+
if (!info) {
printk("Error can't allocate device instance data\n");
} else {
@@ -4257,7 +4257,7 @@ static struct mgsl_struct* mgsl_allocate_device(void)
info->num_tx_dma_buffers = 1;
info->num_tx_holding_buffers = 0;
}
-
+
return info;
} /* end of mgsl_allocate_device()*/
@@ -4298,7 +4298,7 @@ static int mgsl_init_tty(void)
serial_driver = alloc_tty_driver(128);
if (!serial_driver)
return -ENOMEM;
-
+
serial_driver->driver_name = "synclink";
serial_driver->name = "ttySL";
serial_driver->major = ttymajor;
@@ -4319,7 +4319,7 @@ static int mgsl_init_tty(void)
serial_driver = NULL;
return rc;
}
-
+
printk("%s %s, tty major#%d\n",
driver_name, driver_version,
serial_driver->major);
@@ -4332,14 +4332,14 @@ static void mgsl_enum_isa_devices(void)
{
struct mgsl_struct *info;
int i;
-
+
/* Check for user specified ISA devices */
-
+
for (i=0 ;(i < MAX_ISA_DEVICES) && io[i] && irq[i]; i++){
if ( debug_level >= DEBUG_LEVEL_INFO )
printk("ISA device specified io=%04X,irq=%d,dma=%d\n",
io[i], irq[i], dma[i] );
-
+
info = mgsl_allocate_device();
if ( !info ) {
/* error allocating device instance data */
@@ -4347,7 +4347,7 @@ static void mgsl_enum_isa_devices(void)
printk( "can't allocate device instance data.\n");
continue;
}
-
+
/* Copy user configuration info to device instance data */
info->io_base = (unsigned int)io[i];
info->irq_level = (unsigned int)irq[i];
@@ -4356,7 +4356,7 @@ static void mgsl_enum_isa_devices(void)
info->bus_type = MGSL_BUS_TYPE_ISA;
info->io_addr_size = 16;
info->irq_flags = 0;
-
+
mgsl_add_device( info );
}
}
@@ -4388,7 +4388,7 @@ static void synclink_cleanup(void)
tty_port_destroy(&tmp->port);
kfree(tmp);
}
-
+
if (pci_registered)
pci_unregister_driver(&synclink_pci_driver);
}
@@ -4516,7 +4516,7 @@ static void usc_OutDmaReg( struct mgsl_struct *info, u16 RegAddr, u16 RegValue )
inw( info->io_base );
} /* end of usc_OutDmaReg() */
-
+
/*
* usc_InDmaReg()
*
@@ -4546,7 +4546,7 @@ static u16 usc_InDmaReg( struct mgsl_struct *info, u16 RegAddr )
*
* usc_OutReg()
*
- * Write a 16-bit value to a USC serial channel register
+ * Write a 16-bit value to a USC serial channel register
*
* Arguments:
*
@@ -4602,7 +4602,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
{
u16 RegValue;
bool PreSL1660;
-
+
/*
* determine if the IUSC on the adapter is pre-SL1660. If
* not, take advantage of the UnderWait feature of more
@@ -4631,14 +4631,14 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
** 1000 1110 0000 0110 = 0x8e06
*/
RegValue = 0x8e06;
-
+
/*--------------------------------------------------
* ignore user options for UnderRun Actions and
* preambles
*--------------------------------------------------*/
}
else
- {
+ {
/* Channel mode Register (CMR)
*
* <15..14> 00 Tx Sub modes, Underrun Action
@@ -4776,7 +4776,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
/* Transmit mode Register (TMR)
- *
+ *
* <15..13> 000 encoding
* <12..11> 00 FCS = 16bit CRC CCITT (x15 + x12 + x5 + 1)
* <10> 1 1 = Start CRC as all 1s (use for SDLC/HDLC)
@@ -4831,7 +4831,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
if ( info->bus_type == MGSL_BUS_TYPE_PCI )
usc_OutReg( info, TICR, 0x0736 );
- else
+ else
usc_OutReg( info, TICR, 0x1436 );
usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
@@ -4851,14 +4851,14 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
** <2> x All Sent
** <1> x TxUnder
** <0> x TxEmpty
- **
+ **
** 0000 0000 0000 0000 = 0x0000
*/
info->tcsr_value = 0;
if ( !PreSL1660 )
info->tcsr_value |= TCSR_UNDERWAIT;
-
+
usc_OutReg( info, TCSR, info->tcsr_value );
/* Clock mode Control Register (CMCR)
@@ -4946,7 +4946,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
/*--------------------------------------------------
* ejz: for DPLL mode, application should use the
- * same clock speed as the partner system, even
+ * same clock speed as the partner system, even
* though clocking is derived from the input RxData.
* In case the user uses a 0 for the clock speed,
* default to 0xffffffff and don't try to divide by
@@ -4961,7 +4961,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
}
else
Tc = -1;
-
+
/* Write 16-bit Time Constant for BRG1 */
usc_OutReg( info, TC1R, Tc );
@@ -5008,7 +5008,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
usc_OutReg( info, SICR,
(u16)(usc_InReg(info,SICR) | SICR_CTS_INACTIVE) );
}
-
+
/* enable Master Interrupt Enable bit (MIE) */
usc_EnableMasterIrqBit( info );
@@ -5161,7 +5161,7 @@ static void usc_set_sdlc_mode( struct mgsl_struct *info )
usc_stop_transmitter(info);
usc_stop_receiver(info);
-
+
} /* end of usc_set_sdlc_mode() */
/* usc_enable_loopback()
@@ -5179,7 +5179,7 @@ static void usc_enable_loopback(struct mgsl_struct *info, int enable)
if (enable) {
/* blank external TXD output */
usc_OutReg(info,IOCR,usc_InReg(info,IOCR) | (BIT7 | BIT6));
-
+
/* Clock mode Control Register (CMCR)
*
* <15..14> 00 counter 1 Disabled
@@ -5218,12 +5218,12 @@ static void usc_enable_loopback(struct mgsl_struct *info, int enable)
} else {
/* enable external TXD output */
usc_OutReg(info,IOCR,usc_InReg(info,IOCR) & ~(BIT7 | BIT6));
-
+
/* clear Internal Data loopback mode */
info->loopback_bits = 0;
outw( 0,info->io_base + CCAR );
}
-
+
} /* end of usc_enable_loopback() */
/* usc_enable_aux_clock()
@@ -5313,7 +5313,7 @@ static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
/* CurrentRxBuffer points to the 1st buffer of the next */
/* possibly available receive frame. */
-
+
frame_start_index = start_index = end_index = info->current_rx_buffer;
/* Search for an unfinished string of buffers. This means */
@@ -5392,9 +5392,9 @@ static void usc_process_rxoverrun_sync( struct mgsl_struct *info )
usc_UnlatchRxstatusBits(info,RXSTATUS_ALL);
usc_ClearIrqPendingBits(info, RECEIVE_DATA|RECEIVE_STATUS);
usc_UnlatchRxstatusBits(info, RECEIVE_DATA|RECEIVE_STATUS);
-
+
usc_EnableReceiver(info,DISABLE_UNCONDITIONAL);
-
+
/* This empties the receive FIFO and loads the RCC with RCLR */
usc_OutReg( info, CCSR, (u16)(usc_InReg(info,CCSR) | BIT13) );
@@ -5439,7 +5439,7 @@ static void usc_stop_receiver( struct mgsl_struct *info )
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_stop_receiver(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
/* Disable receive DMA channel. */
/* This also disables receive DMA channel interrupts */
usc_DmaCmd( info, DmaCmd_ResetRxChannel );
@@ -5457,12 +5457,12 @@ static void usc_stop_receiver( struct mgsl_struct *info )
info->rx_enabled = false;
info->rx_overflow = false;
info->rx_rcc_underrun = false;
-
+
} /* end of stop_receiver() */
/* usc_start_receiver()
*
- * Enable the USC receiver
+ * Enable the USC receiver
*
* Arguments: info pointer to device instance data
* Return Value: None
@@ -5470,7 +5470,7 @@ static void usc_stop_receiver( struct mgsl_struct *info )
static void usc_start_receiver( struct mgsl_struct *info )
{
u32 phys_addr;
-
+
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_start_receiver(%s)\n",
__FILE__,__LINE__, info->device_name );
@@ -5539,7 +5539,7 @@ static void usc_start_transmitter( struct mgsl_struct *info )
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_start_transmitter(%s)\n",
__FILE__,__LINE__, info->device_name );
-
+
if ( info->xmit_cnt ) {
/* If auto RTS enabled and RTS is inactive, then assert */
@@ -5568,7 +5568,7 @@ static void usc_start_transmitter( struct mgsl_struct *info )
} else {
/* Disable transmit DMA controller while programming. */
usc_DmaCmd( info, DmaCmd_ResetTxChannel );
-
+
/* Transmit DMA buffer is loaded, so program USC */
/* to send the frame contained in the buffers. */
@@ -5611,9 +5611,9 @@ static void usc_start_transmitter( struct mgsl_struct *info )
/* Initialize Transmit DMA Channel */
usc_DmaCmd( info, DmaCmd_InitTxChannel );
-
+
usc_TCmd( info, TCmd_SendFrame );
-
+
mod_timer(&info->tx_timer, jiffies +
msecs_to_jiffies(5000));
}
@@ -5642,9 +5642,9 @@ static void usc_stop_transmitter( struct mgsl_struct *info )
if (debug_level >= DEBUG_LEVEL_ISR)
printk("%s(%d):usc_stop_transmitter(%s)\n",
__FILE__,__LINE__, info->device_name );
-
- del_timer(&info->tx_timer);
-
+
+ del_timer(&info->tx_timer);
+
usc_UnlatchTxstatusBits( info, TXSTATUS_ALL );
usc_ClearIrqPendingBits( info, TRANSMIT_STATUS + TRANSMIT_DATA );
usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA );
@@ -5670,10 +5670,10 @@ static void usc_load_txfifo( struct mgsl_struct *info )
{
int Fifocount;
u8 TwoBytes[2];
-
+
if ( !info->xmit_cnt && !info->x_char )
- return;
-
+ return;
+
/* Select transmit FIFO status readback in TICR */
usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
@@ -5685,22 +5685,22 @@ static void usc_load_txfifo( struct mgsl_struct *info )
if ( (info->xmit_cnt > 1) && (Fifocount > 1) && !info->x_char ) {
/* write a 16-bit word from transmit buffer to 16C32 */
-
+
TwoBytes[0] = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
TwoBytes[1] = info->xmit_buf[info->xmit_tail++];
info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1);
-
+
outw( *((u16 *)TwoBytes), info->io_base + DATAREG);
-
+
info->xmit_cnt -= 2;
info->icount.tx += 2;
} else {
/* only 1 byte left to transmit or 1 FIFO slot left */
-
+
outw( (inw( info->io_base + CCAR) & 0x0780) | (TDR+LSBONLY),
info->io_base + CCAR );
-
+
if (info->x_char) {
/* transmit pending high priority char */
outw( info->x_char,info->io_base + CCAR );
@@ -5739,8 +5739,8 @@ static void usc_reset( struct mgsl_struct *info )
*MiscCtrl = info->misc_ctrl_value;
/*
- * Force at least 170ns delay before clearing
- * reset bit. Each read from LCR takes at least
+ * Force at least 170ns delay before clearing
+ * reset bit. Each read from LCR takes at least
* 30ns so 10 times for 300ns to be safe.
*/
for(i=0;i<10;i++)
@@ -5784,7 +5784,7 @@ static void usc_reset( struct mgsl_struct *info )
* By writing to io_base + SDPIN the Wait/Ack pin is
* programmed to work as a Wait pin.
*/
-
+
outw( 0x000c,info->io_base + SDPIN );
@@ -5866,7 +5866,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
RegValue |= BIT14;
usc_OutReg( info, CMR, RegValue );
-
+
/* Receiver mode Register (RMR)
*
* <15..13> 000 encoding = None
@@ -5897,7 +5897,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
usc_RCmd( info, RCmd_SelectRicrIntLevel );
-
+
/* Receive Interrupt Control Register (RICR)
*
* <15..8> ? RxFIFO IRQ Request Level
@@ -5917,13 +5917,13 @@ static void usc_set_async_mode( struct mgsl_struct *info )
*
* 0000 0000 0100 0000 = 0x0000 + (FIFOLEVEL in MSB)
*/
-
+
usc_OutReg( info, RICR, 0x0000 );
usc_UnlatchRxstatusBits( info, RXSTATUS_ALL );
usc_ClearIrqPendingBits( info, RECEIVE_STATUS );
-
+
/* Transmit mode Register (TMR)
*
* <15..13> 000 encoding = None
@@ -5956,7 +5956,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
usc_TCmd( info, TCmd_SelectTicrIntLevel );
-
+
/* Transmit Interrupt Control Register (TICR)
*
* <15..8> ? Transmit FIFO IRQ Level
@@ -5979,7 +5979,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
usc_enable_async_clock( info, info->params.data_rate );
-
+
/* Channel Control/status Register (CCSR)
*
* <15> X RCC FIFO Overflow status (RO)
@@ -5997,7 +5997,7 @@ static void usc_set_async_mode( struct mgsl_struct *info )
*
* 0000 0000 0010 0000 = 0x0020
*/
-
+
usc_OutReg( info, CCSR, 0x0020 );
usc_DisableInterrupts( info, TRANSMIT_STATUS + TRANSMIT_DATA +
@@ -6041,7 +6041,7 @@ static void usc_loopback_frame( struct mgsl_struct *info )
unsigned long oldmode = info->params.mode;
info->params.mode = MGSL_MODE_HDLC;
-
+
usc_DisableMasterIrqBit( info );
usc_set_sdlc_mode( info );
@@ -6049,7 +6049,7 @@ static void usc_loopback_frame( struct mgsl_struct *info )
/* Write 16-bit Time Constant for BRG0 */
usc_OutReg( info, TC0R, 0 );
-
+
/* Channel Control Register (CCR)
*
* <15..14> 00 Don't use 32-bit Tx Control Blocks (TCBs)
@@ -6083,7 +6083,7 @@ static void usc_loopback_frame( struct mgsl_struct *info )
/* ENABLE TRANSMITTER */
usc_TCmd( info, TCmd_SendFrame );
usc_EnableTransmitter(info,ENABLE_UNCONDITIONAL);
-
+
/* WAIT FOR RECEIVE COMPLETE */
for (i=0 ; i<1000 ; i++)
if (usc_InReg( info, RCSR ) & (BIT8 | BIT4 | BIT3 | BIT1))
@@ -6221,7 +6221,7 @@ static void usc_get_serial_signals( struct mgsl_struct *info )
*
* Set the state of RTS and DTR based on contents of
* serial_signals member of device extension.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -6262,7 +6262,7 @@ static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
if ( data_rate ) {
/*
* Clock mode Control Register (CMCR)
- *
+ *
* <15..14> 00 counter 1 Disabled
* <13..12> 00 counter 0 Disabled
* <11..10> 11 BRG1 Input is TxC Pin
@@ -6273,7 +6273,7 @@ static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
*
* 0000 1111 0110 0100 = 0x0f64
*/
-
+
usc_OutReg( info, CMCR, 0x0f64 );
@@ -6288,7 +6288,7 @@ static void usc_enable_async_clock( struct mgsl_struct *info, u32 data_rate )
else
usc_OutReg( info, TC0R, (u16)((921600/data_rate) - 1) );
-
+
/*
* Hardware Configuration Register (HCR)
* Clear Bit 1, BRG0 mode = Continuous
@@ -6400,11 +6400,11 @@ static int num_free_tx_dma_buffers(struct mgsl_struct *info)
/*
* mgsl_reset_rx_dma_buffers()
- *
+ *
* Set the count for all receive buffers to DMABUFFERSIZE
* and set the current buffer to the first buffer. This effectively
* makes all buffers free and discards any data in buffers.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: None
*/
@@ -6424,16 +6424,16 @@ static void mgsl_reset_rx_dma_buffers( struct mgsl_struct *info )
/*
* mgsl_free_rx_frame_buffers()
- *
+ *
* Free the receive buffers used by a received SDLC
* frame such that the buffers can be reused.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device instance data
* StartIndex index of 1st receive buffer of frame
* EndIndex index of last receive buffer of frame
- *
+ *
* Return Value: None
*/
static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int StartIndex, unsigned int EndIndex )
@@ -6472,7 +6472,7 @@ static void mgsl_free_rx_frame_buffers( struct mgsl_struct *info, unsigned int S
} /* end of free_rx_frame_buffers() */
/* mgsl_get_rx_frame()
- *
+ *
* This function attempts to return a received SDLC frame from the
* receive DMA buffers. Only frames received without errors are returned.
*
@@ -6489,7 +6489,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
unsigned long flags;
struct tty_struct *tty = info->port.tty;
bool return_frame = false;
-
+
/*
* current_rx_buffer points to the 1st buffer of the next available
* receive frame. To find the last buffer of the frame look for
@@ -6533,7 +6533,7 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
/* check status of receive frame */
-
+
status = info->rx_buffer_list[EndIndex].status;
if ( status & (RXSTATUS_SHORT_FRAME | RXSTATUS_OVERRUN |
@@ -6572,17 +6572,17 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
if ( info->params.crc_type == HDLC_CRC_16_CCITT )
framesize -= 2;
else if ( info->params.crc_type == HDLC_CRC_32_CCITT )
- framesize -= 4;
+ framesize -= 4;
}
if ( debug_level >= DEBUG_LEVEL_BH )
printk("%s(%d):mgsl_get_rx_frame(%s) status=%04X size=%d\n",
__FILE__,__LINE__,info->device_name,status,framesize);
-
+
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,info->rx_buffer_list[StartIndex].virt_addr,
min_t(int, framesize, DMABUFFERSIZE),0);
-
+
if (framesize) {
if ( ( (info->params.crc_type & HDLC_CRC_RETURN_EX) &&
((framesize+1) > info->max_frame_size) ) ||
@@ -6596,19 +6596,19 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
if ( !(status & RXSTATUS_CRC_ERROR))
info->icount.rxok++;
-
+
while(copy_count) {
int partial_count;
if ( copy_count > DMABUFFERSIZE )
partial_count = DMABUFFERSIZE;
else
partial_count = copy_count;
-
+
pBufEntry = &(info->rx_buffer_list[index]);
memcpy( ptmp, pBufEntry->virt_addr, partial_count );
ptmp += partial_count;
copy_count -= partial_count;
-
+
if ( ++index == info->rx_buffer_count )
index = 0;
}
@@ -6641,8 +6641,8 @@ static bool mgsl_get_rx_frame(struct mgsl_struct *info)
Cleanup:
if ( info->rx_enabled && info->rx_overflow ) {
- /* The receiver needs to restarted because of
- * a receive overflow (buffer or FIFO). If the
+ /* The receiver needs to restarted because of
+ * a receive overflow (buffer or FIFO). If the
* receive buffers are now empty, then restart receiver.
*/
@@ -6831,15 +6831,15 @@ static bool mgsl_get_raw_rx_frame(struct mgsl_struct *info)
} /* end of mgsl_get_raw_rx_frame() */
/* mgsl_load_tx_dma_buffer()
- *
+ *
* Load the transmit DMA buffer with the specified data.
- *
+ *
* Arguments:
- *
+ *
* info pointer to device extension
* Buffer pointer to buffer containing frame to load
* BufferSize size in bytes of frame in Buffer
- *
+ *
* Return Value: None
*/
static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
@@ -6848,7 +6848,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
unsigned short Copycount;
unsigned int i = 0;
DMABUFFERENTRY *pBufEntry;
-
+
if ( debug_level >= DEBUG_LEVEL_DATA )
mgsl_trace_block(info,Buffer, min_t(int, BufferSize, DMABUFFERSIZE), 1);
@@ -6858,7 +6858,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
*/
info->cmr_value |= BIT13;
}
-
+
/* begin loading the frame in the next available tx dma
* buffer, remember it's starting location for setting
* up tx dma operation
@@ -6879,7 +6879,7 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
while( BufferSize ){
/* Get a pointer to next DMA buffer entry. */
pBufEntry = &info->tx_buffer_list[i++];
-
+
if ( i == info->tx_buffer_count )
i=0;
@@ -6913,9 +6913,9 @@ static void mgsl_load_tx_dma_buffer(struct mgsl_struct *info,
/*
* mgsl_register_test()
- *
+ *
* Performs a register test of the 16C32.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -6971,7 +6971,7 @@ static bool mgsl_register_test( struct mgsl_struct *info )
} /* end of mgsl_register_test() */
/* mgsl_irq_test() Perform interrupt test of the 16C32.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -6984,7 +6984,7 @@ static bool mgsl_irq_test( struct mgsl_struct *info )
usc_reset(info);
/*
- * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
+ * Setup 16C32 to interrupt on TxC pin (14MHz clock) transition.
* The ISR sets irq_occurred to true.
*/
@@ -6999,7 +6999,7 @@ static bool mgsl_irq_test( struct mgsl_struct *info )
usc_EnableMasterIrqBit(info);
usc_EnableInterrupts(info, IO_PIN);
usc_ClearIrqPendingBits(info, IO_PIN);
-
+
usc_UnlatchIostatusBits(info, MISCSTATUS_TXC_LATCHED);
usc_EnableStatusIrqs(info, SICR_TXC_ACTIVE + SICR_TXC_INACTIVE);
@@ -7009,21 +7009,21 @@ static bool mgsl_irq_test( struct mgsl_struct *info )
while( EndTime-- && !info->irq_occurred ) {
msleep_interruptible(10);
}
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
usc_reset(info);
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
return info->irq_occurred;
} /* end of mgsl_irq_test() */
/* mgsl_dma_test()
- *
+ *
* Perform a DMA test of the 16C32. A small frame is
* transmitted via DMA from a transmit buffer to a receive buffer
* using single buffer DMA mode.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -7044,17 +7044,17 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
memcpy(&tmp_params,&info->params,sizeof(MGSL_PARAMS));
/* load default port options */
memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
-
+
#define TESTFRAMESIZE 40
spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
/* setup 16C32 for SDLC DMA transfer mode */
usc_reset(info);
usc_set_sdlc_mode(info);
usc_enable_loopback(info,1);
-
+
/* Reprogram the RDMR so that the 16C32 does NOT clear the count
* field of the buffer entry after fetching buffer address. This
* way we can detect a DMA failure for a DMA read (which should be
@@ -7063,7 +7063,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
*/
/* Receive DMA mode Register (RDMR)
- *
+ *
* <15..14> 11 DMA mode = Linked List Buffer mode
* <13> 1 RSBinA/L = store Rx status Block in List entry
* <12> 0 1 = Clear count of List Entry after fetching
@@ -7071,12 +7071,12 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
* <9> 1 Terminate Buffer on RxBound
* <8> 0 Bus Width = 16bits
* <7..0> ? status Bits (write as 0s)
- *
+ *
* 1110 0010 0000 0000 = 0xe200
*/
usc_OutDmaReg( info, RDMR, 0xe200 );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -7112,12 +7112,12 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
info->tx_buffer_list[1].count = 0;
info->rx_buffer_list[1].count = 0;
-
+
/***************************/
/* Program 16C32 receiver. */
/***************************/
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
/* setup DMA transfers */
@@ -7134,7 +7134,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/* Enable Receiver (RMR <1..0> = 10) */
usc_OutReg( info, RMR, (unsigned short)((usc_InReg(info, RMR) & 0xfffc) | 0x0002) );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -7167,7 +7167,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/******************************/
/* Program 16C32 transmitter. */
/******************************/
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
/* Program the Transmit Character Length Register (TCLR) */
@@ -7190,14 +7190,14 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/* wait for DMA controller to fill transmit FIFO */
usc_TCmd( info, TCmd_SelectTicrTxFifostatus );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
/**********************************/
/* WAIT FOR TRANSMIT FIFO TO FILL */
/**********************************/
-
+
/* Wait 100ms */
EndTime = jiffies + msecs_to_jiffies(100);
@@ -7210,7 +7210,7 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
spin_lock_irqsave(&info->irq_spinlock,flags);
FifoLevel = usc_InReg(info, TICR) >> 8;
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
if ( FifoLevel < 16 )
break;
else
@@ -7228,11 +7228,11 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/* Enable 16C32 transmitter. */
spin_lock_irqsave(&info->irq_spinlock,flags);
-
+
/* Transmit mode Register (TMR), <1..0> = 10, Enable Transmitter */
usc_TCmd( info, TCmd_SendFrame );
usc_OutReg( info, TMR, (unsigned short)((usc_InReg(info, TMR) & 0xfffc) | 0x0002) );
-
+
spin_unlock_irqrestore(&info->irq_spinlock,flags);
@@ -7307,15 +7307,15 @@ static bool mgsl_dma_test( struct mgsl_struct *info )
/* restore current port options */
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
-
+
return rc;
} /* end of mgsl_dma_test() */
/* mgsl_adapter_test()
- *
+ *
* Perform the register, IRQ, and DMA tests for the 16C32.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: 0 if success, otherwise -ENODEV
*/
@@ -7324,7 +7324,7 @@ static int mgsl_adapter_test( struct mgsl_struct *info )
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):Testing device %s\n",
__FILE__,__LINE__,info->device_name );
-
+
if ( !mgsl_register_test( info ) ) {
info->init_error = DiagStatus_AddressFailure;
printk( "%s(%d):Register test failure for device %s Addr=%04X\n",
@@ -7349,15 +7349,15 @@ static int mgsl_adapter_test( struct mgsl_struct *info )
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):device %s passed diagnostics\n",
__FILE__,__LINE__,info->device_name );
-
+
return 0;
} /* end of mgsl_adapter_test() */
/* mgsl_memory_test()
- *
+ *
* Test the shared memory on a PCI adapter.
- *
+ *
* Arguments: info pointer to device instance data
* Return Value: true if test passed, otherwise false
*/
@@ -7407,35 +7407,35 @@ static bool mgsl_memory_test( struct mgsl_struct *info )
/* mgsl_load_pci_memory()
- *
+ *
* Load a large block of data into the PCI shared memory.
* Use this instead of memcpy() or memmove() to move data
* into the PCI shared memory.
- *
+ *
* Notes:
- *
+ *
* This function prevents the PCI9050 interface chip from hogging
* the adapter local bus, which can starve the 16C32 by preventing
* 16C32 bus master cycles.
- *
+ *
* The PCI9050 documentation says that the 9050 will always release
* control of the local bus after completing the current read
* or write operation.
- *
+ *
* It appears that as long as the PCI9050 write FIFO is full, the
* PCI9050 treats all of the writes as a single burst transaction
* and will not release the bus. This causes DMA latency problems
* at high speeds when copying large data blocks to the shared
* memory.
- *
+ *
* This function in effect, breaks the a large shared memory write
* into multiple transations by interleaving a shared memory read
* which will flush the write FIFO and 'complete' the write
* transation. This allows any pending DMA request to gain control
* of the local bus in a timely fasion.
- *
+ *
* Arguments:
- *
+ *
* TargetPtr pointer to target address in PCI shared memory
* SourcePtr pointer to source buffer for data
* count count in bytes of data to copy
@@ -7472,13 +7472,13 @@ static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int coun
printk("%s tx data:\n",info->device_name);
else
printk("%s rx data:\n",info->device_name);
-
+
while(count) {
if (count > 16)
linecount = 16;
else
linecount = count;
-
+
for(i=0;i<linecount;i++)
printk("%02X ",(unsigned char)data[i]);
for(;i<17;i++)
@@ -7490,17 +7490,17 @@ static void mgsl_trace_block(struct mgsl_struct *info,const char* data, int coun
printk(".");
}
printk("\n");
-
+
data += linecount;
count -= linecount;
}
} /* end of mgsl_trace_block() */
/* mgsl_tx_timeout()
- *
+ *
* called when HDLC frame times out
* update stats and do tx completion processing
- *
+ *
* Arguments: context pointer to device instance data
* Return Value: None
*/
@@ -7508,7 +7508,7 @@ static void mgsl_tx_timeout(struct timer_list *t)
{
struct mgsl_struct *info = from_timer(info, t, tx_timer);
unsigned long flags;
-
+
if ( debug_level >= DEBUG_LEVEL_INFO )
printk( "%s(%d):mgsl_tx_timeout(%s)\n",
__FILE__,__LINE__,info->device_name);
@@ -7525,14 +7525,14 @@ static void mgsl_tx_timeout(struct timer_list *t)
usc_loopmode_cancel_transmit( info );
spin_unlock_irqrestore(&info->irq_spinlock,flags);
-
+
#if SYNCLINK_GENERIC_HDLC
if (info->netcount)
hdlcdev_tx_done(info);
else
#endif
mgsl_bh_transmit(info);
-
+
} /* end of mgsl_tx_timeout() */
/* signal that there are no more frames to send, so that
@@ -7542,7 +7542,7 @@ static void mgsl_tx_timeout(struct timer_list *t)
static int mgsl_loopmode_send_done( struct mgsl_struct * info )
{
unsigned long flags;
-
+
spin_lock_irqsave(&info->irq_spinlock,flags);
if (info->params.flags & HDLC_FLAG_HDLC_LOOPMODE) {
if (info->tx_active)
@@ -7583,13 +7583,13 @@ static void usc_loopmode_cancel_transmit( struct mgsl_struct * info )
static void usc_loopmode_insert_request( struct mgsl_struct * info )
{
info->loopmode_insert_requested = true;
-
+
/* enable RxAbort irq. On next RxAbort, clear CMR:13 to
* begin repeating TxData on RxData (complete insertion)
*/
- usc_OutReg( info, RICR,
+ usc_OutReg( info, RICR,
(usc_InReg( info, RICR ) | RXSTATUS_ABORT_RECEIVED ) );
-
+
/* set CMR:13 to insert into loop on next GoAhead (RxAbort) */
info->cmr_value |= BIT13;
usc_OutReg(info, CMR, info->cmr_value);
@@ -8045,11 +8045,11 @@ static int synclink_init_one (struct pci_dev *dev,
}
/* Copy user configuration info to device instance data */
-
+
info->io_base = pci_resource_start(dev, 2);
info->irq_level = dev->irq;
info->phys_memory_base = pci_resource_start(dev, 3);
-
+
/* Because veremap only works on page boundaries we must map
* a larger area than is actually implemented for the LCR
* memory range. We map a full page starting at the page boundary.
@@ -8057,7 +8057,7 @@ static int synclink_init_one (struct pci_dev *dev,
info->phys_lcr_base = pci_resource_start(dev, 0);
info->lcr_offset = info->phys_lcr_base & (PAGE_SIZE-1);
info->phys_lcr_base &= ~(PAGE_SIZE-1);
-
+
info->bus_type = MGSL_BUS_TYPE_PCI;
info->io_addr_size = 8;
info->irq_flags = IRQF_SHARED;
@@ -8068,14 +8068,14 @@ static int synclink_init_one (struct pci_dev *dev,
info->hw_version = 1;
} else {
/* Version 0 PCI9050 based 5V PCI adapter
- * A PCI9050 bug prevents reading LCR registers if
+ * A PCI9050 bug prevents reading LCR registers if
* LCR base address bit 7 is set. Maintain shadow
* value so we can write to LCR misc control reg.
*/
info->misc_ctrl_value = 0x087e4546;
info->hw_version = 0;
}
-
+
mgsl_add_device(info);
return 0;
diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c
index 1e4d5b9c981a..58570451d0be 100644
--- a/drivers/tty/synclinkmp.c
+++ b/drivers/tty/synclinkmp.c
@@ -946,7 +946,7 @@ static int write(struct tty_struct *tty,
info->max_frame_size - info->tx_put));
if (c <= 0)
break;
-
+
memcpy(info->tx_buf + info->tx_put, buf, c);
spin_lock_irqsave(&info->lock,flags);
@@ -1291,7 +1291,7 @@ static int ioctl(struct tty_struct *tty,
*/
case TIOCMIWAIT:
return modem_input_wait(info,(int)arg);
-
+
/*
* Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
* Return: write counters to the user passed counter struct
@@ -2092,7 +2092,7 @@ static void isr_rxint(SLMP_INFO * info)
if (status2)
write_reg(info, SR2, status2);
-
+
if ( debug_level >= DEBUG_LEVEL_ISR )
printk("%s(%d):%s isr_rxint status=%02X %02x\n",
__FILE__,__LINE__,info->device_name,status,status2);
@@ -4213,24 +4213,24 @@ static void tx_start(SLMP_INFO *info)
write_reg(info, TXDMA + DSR, 0); /* disable DMA channel */
write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
-
+
/* set TX CDA (current descriptor address) */
write_reg16(info, TXDMA + CDA,
info->tx_buf_list_ex[0].phys_entry);
-
+
/* set TX EDA (last descriptor address) */
write_reg16(info, TXDMA + EDA,
info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
-
+
/* enable underrun IRQ */
info->ie1_value &= ~IDLE;
info->ie1_value |= UDRN;
write_reg(info, IE1, info->ie1_value);
write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
-
+
write_reg(info, TXDMA + DIR, 0x40); /* enable Tx DMA interrupts (EOM) */
write_reg(info, TXDMA + DSR, 0xf2); /* clear Tx DMA IRQs, enable Tx DMA */
-
+
mod_timer(&info->tx_timer, jiffies +
msecs_to_jiffies(5000));
}
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index df94cdbe0096..6e47e9a5e86d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -2701,7 +2701,7 @@ static int this_tty(const void *t, struct file *file, unsigned fd)
return 0;
return file_tty(file) != t ? 0 : fd + 1;
}
-
+
/*
* This implements the "Secure Attention Key" --- the idea is to
* prevent trojan horses by killing all processes associated with this
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index f9bcae2b7e36..56426611050d 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -832,7 +832,7 @@ int tty_mode_ioctl(struct tty_struct *tty, struct file *file,
return set_termiox(real_tty, p, TERMIOS_WAIT);
case TCSETXF:
return set_termiox(real_tty, p, TERMIOS_FLUSH);
-#endif
+#endif
case TIOCGSOFTCAR:
copy_termios(real_tty, &kterm);
ret = put_user((kterm.c_cflag & CLOCAL) ? 1 : 0,
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 97d02684b922..71086e4abc9a 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -71,7 +71,7 @@ static unsigned short translations[][256] = {
0x00e8, 0x00e9, 0x00ea, 0x00eb, 0x00ec, 0x00ed, 0x00ee, 0x00ef,
0x00f0, 0x00f1, 0x00f2, 0x00f3, 0x00f4, 0x00f5, 0x00f6, 0x00f7,
0x00f8, 0x00f9, 0x00fa, 0x00fb, 0x00fc, 0x00fd, 0x00fe, 0x00ff
- },
+ },
/* VT100 graphics mapped to Unicode */
{
0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007,
@@ -109,7 +109,7 @@ static unsigned short translations[][256] = {
},
/* IBM Codepage 437 mapped to Unicode */
{
- 0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022,
+ 0x0000, 0x263a, 0x263b, 0x2665, 0x2666, 0x2663, 0x2660, 0x2022,
0x25d8, 0x25cb, 0x25d9, 0x2642, 0x2640, 0x266a, 0x266b, 0x263c,
0x25b6, 0x25c0, 0x2195, 0x203c, 0x00b6, 0x00a7, 0x25ac, 0x21a8,
0x2191, 0x2193, 0x2192, 0x2190, 0x221f, 0x2194, 0x25b2, 0x25bc,
@@ -141,7 +141,7 @@ static unsigned short translations[][256] = {
0x03a6, 0x0398, 0x03a9, 0x03b4, 0x221e, 0x03c6, 0x03b5, 0x2229,
0x2261, 0x00b1, 0x2265, 0x2264, 0x2320, 0x2321, 0x00f7, 0x2248,
0x00b0, 0x2219, 0x00b7, 0x221a, 0x207f, 0x00b2, 0x25a0, 0x00a0
- },
+ },
/* User mapping -- default to codes for direct font mapping */
{
0xf000, 0xf001, 0xf002, 0xf003, 0xf004, 0xf005, 0xf006, 0xf007,
@@ -201,7 +201,7 @@ static void set_inverse_transl(struct vc_data *conp, struct uni_pagedir *p, int
int j, glyph;
unsigned short *t = translations[i];
unsigned char *q;
-
+
if (!p) return;
q = p->inverse_translations[i];
@@ -298,7 +298,7 @@ static void update_user_maps(void)
{
int i;
struct uni_pagedir *p, *q = NULL;
-
+
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons_allocated(i))
continue;
@@ -381,7 +381,7 @@ int con_get_trans_new(ushort __user * arg)
}
/*
- * Unicode -> current font conversion
+ * Unicode -> current font conversion
*
* A font has at most 512 chars, usually 256.
* But one font position may represent several Unicode chars.
@@ -398,7 +398,7 @@ static void con_release_unimap(struct uni_pagedir *p)
u16 **p1;
int i, j;
- if (p == dflt) dflt = NULL;
+ if (p == dflt) dflt = NULL;
for (i = 0; i < 32; i++) {
p1 = p->uni_pgdir[i];
if (p1 != NULL) {
@@ -430,12 +430,12 @@ void con_free_unimap(struct vc_data *vc)
con_release_unimap(p);
kfree(p);
}
-
+
static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p)
{
int i, j, k;
struct uni_pagedir *q;
-
+
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons_allocated(i))
continue;
@@ -494,7 +494,7 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos)
}
p2[unicode & 0x3f] = fontpos;
-
+
p->sum += (fontpos << 20) + unicode;
return 0;
@@ -532,7 +532,7 @@ int con_clear_unimap(struct vc_data *vc)
console_unlock();
return ret;
}
-
+
int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
{
int err = 0, err1, i;
@@ -556,17 +556,17 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
goto out_unlock;
}
-
+
if (p->refcount > 1) {
int j, k;
u16 **p1, *p2, l;
-
+
err1 = con_do_clear_unimap(vc);
if (err1) {
err = err1;
goto out_unlock;
}
-
+
/*
* Since refcount was > 1, con_clear_unimap() allocated a
* a new uni_pagedir for this vc. Re: p != q
@@ -628,7 +628,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
if (err1)
err = err1;
}
-
+
/*
* Merge with fontmaps of any other virtual consoles.
*/
@@ -652,7 +652,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
* Loads the unimap for the hardware font, as defined in uni_hash.tbl.
* The representation used was the most compact I could come up
* with. This routine is executed at video setup, and when the
- * PIO_FONTRESET ioctl is called.
+ * PIO_FONTRESET ioctl is called.
*
* The caller must hold the console lock
*/
@@ -675,23 +675,23 @@ int con_set_default_unimap(struct vc_data *vc)
}
return 0;
}
-
+
/* The default font is always 256 characters */
err = con_do_clear_unimap(vc);
if (err)
return err;
-
+
p = *vc->vc_uni_pagedir_loc;
q = dfont_unitable;
-
+
for (i = 0; i < 256; i++)
for (j = dfont_unicount[i]; j; j--) {
err1 = con_insert_unipair(p, *(q++), i);
if (err1)
err = err1;
}
-
+
if (con_unify_unimap(vc, p)) {
dflt = *vc->vc_uni_pagedir_loc;
return err;
@@ -807,12 +807,12 @@ int conv_uni_to_8bit(u32 uni)
}
int
-conv_uni_to_pc(struct vc_data *conp, long ucs)
+conv_uni_to_pc(struct vc_data *conp, long ucs)
{
int h;
u16 **p1, *p2;
struct uni_pagedir *p;
-
+
/* Only 16-bit codes supported at this time */
if (ucs > 0xffff)
return -4; /* Not found */
@@ -827,7 +827,7 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
*/
else if ((ucs & ~UNI_DIRECT_MASK) == UNI_DIRECT_BASE)
return ucs & UNI_DIRECT_MASK;
-
+
if (!*conp->vc_uni_pagedir_loc)
return -3;
@@ -845,11 +845,11 @@ conv_uni_to_pc(struct vc_data *conp, long ucs)
* initialized. It must be possible to call kmalloc(..., GFP_KERNEL)
* from this function, hence the call from sys_setup.
*/
-void __init
+void __init
console_map_init(void)
{
int i;
-
+
for (i = 0; i < MAX_NR_CONSOLES; i++)
if (vc_cons_allocated(i) && !*vc_cons[i].d->vc_uni_pagedir_loc)
con_set_default_unimap(vc_cons[i].d);
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 214ad559fd2d..4d044bc7122f 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -1769,7 +1769,7 @@ int vt_do_diacrit(unsigned int cmd, void __user *udp, int perm)
ct * sizeof(struct kbdiacruc));
if (IS_ERR(buf))
return PTR_ERR(buf);
- }
+ }
spin_lock_irqsave(&kbd_event_lock, flags);
if (ct)
memcpy(accent_table, buf,
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 94131c746ef7..27f0f19a4c31 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -38,7 +38,7 @@
*
* - Arno Griffioen <arno@usn.nl>
* - David Carter <carter@cs.bris.ac.uk>
- *
+ *
* The abstract console driver provides a generic interface for a text
* console. It supports VGA text mode, frame buffer based graphical consoles
* and special graphics processors that are only accessible through some
@@ -293,7 +293,7 @@ static inline bool con_should_update(const struct vc_data *vc)
static inline unsigned short *screenpos(struct vc_data *vc, int offset, int viewed)
{
unsigned short *p;
-
+
if (!viewed)
p = (unsigned short *)(vc->vc_origin + offset);
else if (!vc->vc_sw->con_screen_pos)
@@ -4380,9 +4380,9 @@ void reset_palette(struct vc_data *vc)
* Font switching
*
* Currently we only support fonts up to 32 pixels wide, at a maximum height
- * of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints,
- * depending on width) reserved for each character which is kinda wasty, but
- * this is done in order to maintain compatibility with the EGA/VGA fonts. It
+ * of 32 pixels. Userspace fontdata is stored with 32 bytes (shorts/ints,
+ * depending on width) reserved for each character which is kinda wasty, but
+ * this is done in order to maintain compatibility with the EGA/VGA fonts. It
* is up to the actual low-level console-driver convert data into its favorite
* format (maybe we should add a `fontoffset' field to the `display'
* structure so we won't have to convert the fontdata all the time.
@@ -4421,7 +4421,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op)
if (op->data && font.charcount > op->charcount)
rc = -ENOSPC;
if (!(op->flags & KD_FONT_FLAG_OLD)) {
- if (font.width > op->width || font.height > op->height)
+ if (font.width > op->width || font.height > op->height)
rc = -ENOSPC;
} else {
if (font.width != 8)
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 30e02ec5d6a0..801f2f6e1302 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -222,13 +222,13 @@ int vt_waitactive(int n)
-static inline int
+static inline int
do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
{
struct consolefontdesc cfdarg;
int i;
- if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
+ if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
return -EFAULT;
switch (cmd) {
@@ -262,7 +262,7 @@ do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struc
return -EINVAL;
}
-static inline int
+static inline int
do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc)
{
struct unimapdesc tmp;
@@ -328,7 +328,7 @@ static void vt_disallocate_all(void)
/*
* We handle the console-specific ioctl's here. We allow the
- * capability to modify any console, not just the fg_console.
+ * capability to modify any console, not just the fg_console.
*/
int vt_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
@@ -382,7 +382,7 @@ int vt_ioctl(struct tty_struct *tty,
return -EPERM;
{
unsigned int ticks, count;
-
+
/*
* Generate the tone for the appropriate number of ticks.
* If the time is zero, turn off sound ourselves.
@@ -433,11 +433,11 @@ int vt_ioctl(struct tty_struct *tty,
#endif
/* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
-
+
case KDKBDREP:
{
struct kbd_repeat kbrep;
-
+
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
@@ -664,7 +664,7 @@ int vt_ioctl(struct tty_struct *tty,
if (! VT_IS_IN_USE(i))
break;
uival = i < MAX_NR_CONSOLES ? (i+1) : -1;
- goto setint;
+ goto setint;
/*
* ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num,
--
2.17.1
next prev parent reply other threads:[~2018-10-18 22:38 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-18 22:37 [PATCH v2 0/7] drivers: tty: Fix kernel-docs comments Tobin C. Harding
2018-10-18 22:37 ` [PATCH v2 1/7] tty: Fix whitespace before tab warnings Tobin C. Harding
2018-11-09 16:42 ` Greg Kroah-Hartman
2018-10-18 22:37 ` Tobin C. Harding [this message]
2018-10-18 22:37 ` [PATCH v2 3/7] tty: Partially fix kernel-docs layout Tobin C. Harding
2018-10-18 22:37 ` [PATCH v2 4/7] tty: Fix kernel-doc variable typos Tobin C. Harding
2018-10-18 22:37 ` [PATCH v2 5/7] tty: Fix spacing between kernel-doc sections Tobin C. Harding
2018-10-18 22:37 ` [PATCH v2 6/7] tty: Remove newline after function kernel-doc Tobin C. Harding
2018-10-18 22:37 ` [PATCH v2 7/7] tty: Fix section format Tobin C. Harding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181018223707.9891-3-tobin@kernel.org \
--to=tobin@kernel.org \
--cc=geert@linux-m68k.org \
--cc=gregkh@linuxfoundation.org \
--cc=jslaby@suse.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.