From mboxrd@z Thu Jan  1 00:00:00 1970
Return-Path: <jic23@kernel.org>
Date: Sun, 21 Oct 2018 18:03:52 +0100
From: Jonathan Cameron <jic23@kernel.org>
Subject: Re: [PATCH v3 2/2] iio:temperature:max31856:Add device tree bind
 info
Message-ID: <20181021180352.7e9aba1b@archlinux>
In-Reply-To: <1539887789-7562-2-git-send-email-matthew.weber@rockwellcollins.com>
References: <1539887789-7562-1-git-send-email-matthew.weber@rockwellcollins.com>
	<1539887789-7562-2-git-send-email-matthew.weber@rockwellcollins.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
To: Matt Weber <matthew.weber@rockwellcollins.com>
Cc: linux-iio@vger.kernel.org, knaack.h@gmx.de, lars@metafoo.de, pmeerw@pmeerw.net, Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org
List-ID: <devicetree@vger.kernel.org>

On Thu, 18 Oct 2018 13:36:29 -0500
Matt Weber <matthew.weber@rockwellcollins.com> wrote:

> From: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
> 
> This patch added device tree binding info for MAX31856 driver.
> 
> Signed-off-by: Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
> Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>

Device tree bindings must be sent to the devicetree list and binding
maintainers for review.

A few comments from me inline.

Thanks,

Jonathan

> ---
> Changes
> v1 -> v2
> [Matt
>  - Removed comment block and added possibilities of
>    thermocouple type in device tree binding doc.
> 
> v2 -> v3
>  - Rebased
> ---
>  .../bindings/iio/temperature/max31856.txt          | 32 ++++++++++++++++++++++
>  MAINTAINERS                                        |  1 +
>  2 files changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/temperature/max31856.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/temperature/max31856.txt b/Documentation/devicetree/bindings/iio/temperature/max31856.txt
> new file mode 100644
> index 0000000..e1def9f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/temperature/max31856.txt
> @@ -0,0 +1,32 @@
> +Maxim MAX31856 thermocouple support
> +
> +https://datasheets.maximintegrated.com/en/ds/MAX31856.pdf
> +
> +Required properties:
> +	- compatible: must be "max31856"
> +	- reg: SPI chip select number for the device
> +	- spi-max-frequency: As per datasheet max. supported freq is 5000000
> +	- spi-cpha: must be defined for max31856 to enable SPI mode 1
> +	- type: Type of thermocouple (By default is K-Type)
> +		0x00 : TYPE_B
> +		0x01 : TYPE_E
> +		0x02 : TYPE_J
> +		0x03 : TYPE_K (default)
> +		0x04 : TYPE_N
> +		0x05 : TYPE_R
> +		0x06 : TYPE_S
> +		0x07 : TYPE_T
> +
> +	Refer to spi/spi-bus.txt for generic SPI slave bindings.
> +
> +Optional properties:
> +	- one-shot: Enable one-shot Conversion mode (By default mode is auto)

As I expressed (rather late) in the previous version's thread,
this should be dropped as it is a policy decision that should be made
from userspace not the devicetree.

> +
> + Example:
> +	max31856@0 {
Should probably use the standard naming for a temp sensor.
temp-sensor@0

> +		compatible = "max31856";
> +		reg = <0>;
> +		spi-max-frequency = <5000000>;
> +		spi-cpha;
> +		type = <0x03>;
> +	};
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 3cfa518..44ec309 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7163,6 +7163,7 @@ L:	linux-iio@vger.kernel.org
>  S:	Maintained
>  F:	drivers/iio/temperature/max31856.c
>  F:	Documentation/ABI/testing/sysfs-bus-iio-temperature-max31856
> +F:	Documentation/devicetree/bindings/iio/temperature/max31856.txt
>  
>  IIO UNIT CONVERTER
>  M:	Peter Rosin <peda@axentia.se>