All of lore.kernel.org
 help / color / mirror / Atom feed
From: Olivier Matz <olivier.matz@6wind.com>
To: dev@dpdk.org
Subject: [RFC 02/14] net: add rte prefix to arp defines
Date: Wed, 24 Oct 2018 10:18:21 +0200	[thread overview]
Message-ID: <20181024081833.21432-3-olivier.matz@6wind.com> (raw)
In-Reply-To: <20181024081833.21432-1-olivier.matz@6wind.com>

Add 'RTE_' prefix to defines:
- rename ARP_HRD_ETHER as RTE_ARP_HRD_ETHER.
- rename ARP_OP_REQUEST as RTE_ARP_OP_REQUEST.
- rename ARP_OP_REPLY as RTE_ARP_OP_REPLY.
- rename ARP_OP_REVREQUEST as RTE_ARP_OP_REVREQUEST.
- rename ARP_OP_REVREPLY as RTE_ARP_OP_REVREPLY.
- rename ARP_OP_INVREQUEST as RTE_ARP_OP_INVREQUEST.
- rename ARP_OP_INVREPLY as RTE_ARP_OP_INVREPLY.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
 app/test-pmd/icmpecho.c                | 18 +++++++++---------
 drivers/net/bonding/rte_eth_bond_alb.c |  8 ++++----
 drivers/net/bonding/rte_eth_bond_pmd.c | 12 ++++++------
 examples/bond/main.c                   |  8 ++++----
 lib/librte_net/rte_arp.c               |  4 ++--
 lib/librte_net/rte_arp.h               | 14 +++++++-------
 test/test/packet_burst_generator.c     |  2 +-
 test/test/test_link_bonding.c          | 18 +++++++++---------
 8 files changed, 42 insertions(+), 42 deletions(-)

diff --git a/app/test-pmd/icmpecho.c b/app/test-pmd/icmpecho.c
index 34f68d73b..062e3ea43 100644
--- a/app/test-pmd/icmpecho.c
+++ b/app/test-pmd/icmpecho.c
@@ -39,17 +39,17 @@ static const char *
 arp_opcode_name(uint16_t arp_opcode)
 {
 	switch (arp_opcode ) {
-	case ARP_OP_REQUEST:
+	case RTE_ARP_OP_REQUEST:
 		return "ARP Request";
-	case ARP_OP_REPLY:
+	case RTE_ARP_OP_REPLY:
 		return "ARP Reply";
-	case ARP_OP_REVREQUEST:
+	case RTE_ARP_OP_REVREQUEST:
 		return "Reverse ARP Request";
-	case ARP_OP_REVREPLY:
+	case RTE_ARP_OP_REVREPLY:
 		return "Reverse ARP Reply";
-	case ARP_OP_INVREQUEST:
+	case RTE_ARP_OP_INVREQUEST:
 		return "Peer Identify Request";
-	case ARP_OP_INVREPLY:
+	case RTE_ARP_OP_INVREPLY:
 		return "Peer Identify Reply";
 	default:
 		break;
@@ -359,7 +359,7 @@ reply_to_icmp_echo_rqsts(struct fwd_stream *fs)
 				       arp_opcode_name(arp_opcode));
 			}
 			if ((RTE_BE_TO_CPU_16(arp_h->arp_hardware) !=
-			     ARP_HRD_ETHER) ||
+			     RTE_ARP_HRD_ETHER) ||
 			    (arp_protocol != ETHER_TYPE_IPv4) ||
 			    (arp_h->arp_hlen != 6) ||
 			    (arp_h->arp_plen != 4)
@@ -381,7 +381,7 @@ reply_to_icmp_echo_rqsts(struct fwd_stream *fs)
 				ipv4_addr_dump(" tip=", ip_addr);
 				printf("\n");
 			}
-			if (arp_opcode != ARP_OP_REQUEST) {
+			if (arp_opcode != RTE_ARP_OP_REQUEST) {
 				rte_pktmbuf_free(pkt);
 				continue;
 			}
@@ -396,7 +396,7 @@ reply_to_icmp_echo_rqsts(struct fwd_stream *fs)
 			ether_addr_copy(&ports[fs->tx_port].eth_addr,
 					&eth_h->s_addr);
 
-			arp_h->arp_opcode = rte_cpu_to_be_16(ARP_OP_REPLY);
+			arp_h->arp_opcode = rte_cpu_to_be_16(RTE_ARP_OP_REPLY);
 			ether_addr_copy(&arp_h->arp_data.arp_tha, &eth_addr);
 			ether_addr_copy(&arp_h->arp_data.arp_sha, &arp_h->arp_data.arp_tha);
 			ether_addr_copy(&eth_h->s_addr, &arp_h->arp_data.arp_sha);
diff --git a/drivers/net/bonding/rte_eth_bond_alb.c b/drivers/net/bonding/rte_eth_bond_alb.c
index b2aeb3ca9..7ae240345 100644
--- a/drivers/net/bonding/rte_eth_bond_alb.c
+++ b/drivers/net/bonding/rte_eth_bond_alb.c
@@ -84,7 +84,7 @@ void bond_mode_alb_arp_recv(struct ether_hdr *eth_h, uint16_t offset,
 	arp = (struct rte_arp_hdr *) ((char *) (eth_h + 1) + offset);
 
 	/* ARP Requests are forwarded to the application with no changes */
-	if (arp->arp_opcode != rte_cpu_to_be_16(ARP_OP_REPLY))
+	if (arp->arp_opcode != rte_cpu_to_be_16(RTE_ARP_OP_REPLY))
 		return;
 
 	/* From now on, we analyze only ARP Reply packets */
@@ -150,7 +150,7 @@ bond_mode_alb_arp_xmit(struct ether_hdr *eth_h, uint16_t offset,
 	client_info = &hash_table[hash_index];
 
 	rte_spinlock_lock(&internals->mode6.lock);
-	if (arp->arp_opcode == rte_cpu_to_be_16(ARP_OP_REPLY)) {
+	if (arp->arp_opcode == rte_cpu_to_be_16(RTE_ARP_OP_REPLY)) {
 		if (client_info->in_use) {
 			if (client_info->app_ip == arp->arp_data.arp_sip &&
 				client_info->cli_ip == arp->arp_data.arp_tip) {
@@ -220,11 +220,11 @@ bond_mode_alb_arp_upd(struct client_data *client_info,
 	ether_addr_copy(&client_info->cli_mac, &arp_h->arp_data.arp_tha);
 	arp_h->arp_data.arp_tip = client_info->cli_ip;
 
-	arp_h->arp_hardware = rte_cpu_to_be_16(ARP_HRD_ETHER);
+	arp_h->arp_hardware = rte_cpu_to_be_16(RTE_ARP_HRD_ETHER);
 	arp_h->arp_protocol = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
 	arp_h->arp_hlen = ETHER_ADDR_LEN;
 	arp_h->arp_plen = sizeof(uint32_t);
-	arp_h->arp_opcode = rte_cpu_to_be_16(ARP_OP_REPLY);
+	arp_h->arp_opcode = rte_cpu_to_be_16(RTE_ARP_OP_REPLY);
 
 	slave_idx = client_info->slave_idx;
 	rte_spinlock_unlock(&internals->mode6.lock);
diff --git a/drivers/net/bonding/rte_eth_bond_pmd.c b/drivers/net/bonding/rte_eth_bond_pmd.c
index a86a74a8d..52724640f 100644
--- a/drivers/net/bonding/rte_eth_bond_pmd.c
+++ b/drivers/net/bonding/rte_eth_bond_pmd.c
@@ -488,25 +488,25 @@ static void
 arp_opcode_name(uint16_t arp_opcode, char *buf)
 {
 	switch (arp_opcode) {
-	case ARP_OP_REQUEST:
+	case RTE_ARP_OP_REQUEST:
 		snprintf(buf, sizeof("ARP Request"), "%s", "ARP Request");
 		return;
-	case ARP_OP_REPLY:
+	case RTE_ARP_OP_REPLY:
 		snprintf(buf, sizeof("ARP Reply"), "%s", "ARP Reply");
 		return;
-	case ARP_OP_REVREQUEST:
+	case RTE_ARP_OP_REVREQUEST:
 		snprintf(buf, sizeof("Reverse ARP Request"), "%s",
 				"Reverse ARP Request");
 		return;
-	case ARP_OP_REVREPLY:
+	case RTE_ARP_OP_REVREPLY:
 		snprintf(buf, sizeof("Reverse ARP Reply"), "%s",
 				"Reverse ARP Reply");
 		return;
-	case ARP_OP_INVREQUEST:
+	case RTE_ARP_OP_INVREQUEST:
 		snprintf(buf, sizeof("Peer Identify Request"), "%s",
 				"Peer Identify Request");
 		return;
-	case ARP_OP_INVREPLY:
+	case RTE_ARP_OP_INVREPLY:
 		snprintf(buf, sizeof("Peer Identify Reply"), "%s",
 				"Peer Identify Reply");
 		return;
diff --git a/examples/bond/main.c b/examples/bond/main.c
index d428c405f..2fe5a9319 100644
--- a/examples/bond/main.c
+++ b/examples/bond/main.c
@@ -369,8 +369,8 @@ static int lcore_main(__attribute__((unused)) void *arg1)
 				}
 				arp_hdr = (struct rte_arp_hdr *)((char *)(eth_hdr + 1) + offset);
 				if (arp_hdr->arp_data.arp_tip == bond_ip) {
-					if (arp_hdr->arp_opcode == rte_cpu_to_be_16(ARP_OP_REQUEST)) {
-						arp_hdr->arp_opcode = rte_cpu_to_be_16(ARP_OP_REPLY);
+					if (arp_hdr->arp_opcode == rte_cpu_to_be_16(RTE_ARP_OP_REQUEST)) {
+						arp_hdr->arp_opcode = rte_cpu_to_be_16(RTE_ARP_OP_REPLY);
 						/* Switch src and dst data and set bonding MAC */
 						ether_addr_copy(&eth_hdr->s_addr, &eth_hdr->d_addr);
 						rte_eth_macaddr_get(BOND_PORT, &eth_hdr->s_addr);
@@ -464,11 +464,11 @@ static void cmd_obj_send_parsed(void *parsed_result,
 	eth_hdr->ether_type = rte_cpu_to_be_16(ETHER_TYPE_ARP);
 
 	arp_hdr = (struct rte_arp_hdr *)((char *)eth_hdr + sizeof(struct ether_hdr));
-	arp_hdr->arp_hardware = rte_cpu_to_be_16(ARP_HRD_ETHER);
+	arp_hdr->arp_hardware = rte_cpu_to_be_16(RTE_ARP_HRD_ETHER);
 	arp_hdr->arp_protocol = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
 	arp_hdr->arp_hlen = ETHER_ADDR_LEN;
 	arp_hdr->arp_plen = sizeof(uint32_t);
-	arp_hdr->arp_opcode = rte_cpu_to_be_16(ARP_OP_REQUEST);
+	arp_hdr->arp_opcode = rte_cpu_to_be_16(RTE_ARP_OP_REQUEST);
 
 	rte_eth_macaddr_get(BOND_PORT, &arp_hdr->arp_data.arp_sha);
 	arp_hdr->arp_data.arp_sip = bond_ip;
diff --git a/lib/librte_net/rte_arp.c b/lib/librte_net/rte_arp.c
index c80ebc7e1..877874a5e 100644
--- a/lib/librte_net/rte_arp.c
+++ b/lib/librte_net/rte_arp.c
@@ -35,11 +35,11 @@ rte_net_make_rarp_packet(struct rte_mempool *mpool,
 
 	/* RARP header. */
 	rarp = (struct rte_arp_hdr *)(eth_hdr + 1);
-	rarp->arp_hardware = htons(ARP_HRD_ETHER);
+	rarp->arp_hardware = htons(RTE_ARP_HRD_ETHER);
 	rarp->arp_protocol = htons(ETHER_TYPE_IPv4);
 	rarp->arp_hlen = ETHER_ADDR_LEN;
 	rarp->arp_plen = 4;
-	rarp->arp_opcode  = htons(ARP_OP_REVREQUEST);
+	rarp->arp_opcode  = htons(RTE_ARP_OP_REVREQUEST);
 
 	ether_addr_copy(mac, &rarp->arp_data.arp_sha);
 	ether_addr_copy(mac, &rarp->arp_data.arp_tha);
diff --git a/lib/librte_net/rte_arp.h b/lib/librte_net/rte_arp.h
index c9b5cd49d..a94fa6a00 100644
--- a/lib/librte_net/rte_arp.h
+++ b/lib/librte_net/rte_arp.h
@@ -33,18 +33,18 @@ struct rte_arp_ipv4 {
  */
 struct rte_arp_hdr {
 	uint16_t arp_hardware;    /* format of hardware address */
-#define ARP_HRD_ETHER     1  /* ARP Ethernet address format */
+#define RTE_ARP_HRD_ETHER     1  /* ARP Ethernet address format */
 
 	uint16_t arp_protocol;    /* format of protocol address */
 	uint8_t  arp_hlen;    /* length of hardware address */
 	uint8_t  arp_plen;    /* length of protocol address */
 	uint16_t arp_opcode;     /* ARP opcode (command) */
-#define	ARP_OP_REQUEST    1 /* request to resolve address */
-#define	ARP_OP_REPLY      2 /* response to previous request */
-#define	ARP_OP_REVREQUEST 3 /* request proto addr given hardware */
-#define	ARP_OP_REVREPLY   4 /* response giving protocol address */
-#define	ARP_OP_INVREQUEST 8 /* request to identify peer */
-#define	ARP_OP_INVREPLY   9 /* response identifying peer */
+#define	RTE_ARP_OP_REQUEST    1 /* request to resolve address */
+#define	RTE_ARP_OP_REPLY      2 /* response to previous request */
+#define	RTE_ARP_OP_REVREQUEST 3 /* request proto addr given hardware */
+#define	RTE_ARP_OP_REVREPLY   4 /* response giving protocol address */
+#define	RTE_ARP_OP_INVREQUEST 8 /* request to identify peer */
+#define	RTE_ARP_OP_INVREPLY   9 /* response identifying peer */
 
 	struct rte_arp_ipv4 arp_data;
 } __attribute__((__packed__));
diff --git a/test/test/packet_burst_generator.c b/test/test/packet_burst_generator.c
index 0b12058bb..ccc0bd591 100644
--- a/test/test/packet_burst_generator.c
+++ b/test/test/packet_burst_generator.c
@@ -78,7 +78,7 @@ initialize_arp_header(struct rte_arp_hdr *arp_hdr, struct ether_addr *src_mac,
 		struct ether_addr *dst_mac, uint32_t src_ip, uint32_t dst_ip,
 		uint32_t opcode)
 {
-	arp_hdr->arp_hardware = rte_cpu_to_be_16(ARP_HRD_ETHER);
+	arp_hdr->arp_hardware = rte_cpu_to_be_16(RTE_ARP_HRD_ETHER);
 	arp_hdr->arp_protocol = rte_cpu_to_be_16(ETHER_TYPE_IPv4);
 	arp_hdr->arp_hlen = ETHER_ADDR_LEN;
 	arp_hdr->arp_plen = sizeof(uint32_t);
diff --git a/test/test/test_link_bonding.c b/test/test/test_link_bonding.c
index db437a9c2..2c20f44ea 100644
--- a/test/test/test_link_bonding.c
+++ b/test/test/test_link_bonding.c
@@ -4497,7 +4497,7 @@ test_alb_change_mac_in_reply_sent(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &bond_mac, &client_mac, ip_host, ip_client1,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	rte_eth_tx_burst(test_params->bonded_port_id, 0, &pkt, 1);
 
 	pkt = rte_pktmbuf_alloc(test_params->mbuf_pool);
@@ -4507,7 +4507,7 @@ test_alb_change_mac_in_reply_sent(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &bond_mac, &client_mac, ip_host, ip_client2,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	rte_eth_tx_burst(test_params->bonded_port_id, 0, &pkt, 1);
 
 	pkt = rte_pktmbuf_alloc(test_params->mbuf_pool);
@@ -4517,7 +4517,7 @@ test_alb_change_mac_in_reply_sent(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &bond_mac, &client_mac, ip_host, ip_client3,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	rte_eth_tx_burst(test_params->bonded_port_id, 0, &pkt, 1);
 
 	pkt = rte_pktmbuf_alloc(test_params->mbuf_pool);
@@ -4527,7 +4527,7 @@ test_alb_change_mac_in_reply_sent(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &bond_mac, &client_mac, ip_host, ip_client4,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	rte_eth_tx_burst(test_params->bonded_port_id, 0, &pkt, 1);
 
 	slave_mac1 =
@@ -4610,7 +4610,7 @@ test_alb_reply_from_client(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &client_mac, &bond_mac, ip_client1, ip_host,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[0], &pkt,
 			1);
 
@@ -4621,7 +4621,7 @@ test_alb_reply_from_client(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &client_mac, &bond_mac, ip_client2, ip_host,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[0], &pkt,
 			1);
 
@@ -4632,7 +4632,7 @@ test_alb_reply_from_client(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &client_mac, &bond_mac, ip_client3, ip_host,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[0], &pkt,
 			1);
 
@@ -4643,7 +4643,7 @@ test_alb_reply_from_client(void)
 			0);
 	arp_pkt = (struct rte_arp_hdr *)((char *)eth_pkt + sizeof(struct ether_hdr));
 	initialize_arp_header(arp_pkt, &client_mac, &bond_mac, ip_client4, ip_host,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[0], &pkt,
 			1);
 
@@ -4742,7 +4742,7 @@ test_alb_receive_vlan_reply(void)
 	vlan_pkt->eth_proto = rte_cpu_to_be_16(ETHER_TYPE_ARP);
 	arp_pkt = (struct rte_arp_hdr *)((char *)(vlan_pkt + 1));
 	initialize_arp_header(arp_pkt, &client_mac, &bond_mac, ip_client1, ip_host,
-			ARP_OP_REPLY);
+			RTE_ARP_OP_REPLY);
 	virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[0], &pkt,
 			1);
 
-- 
2.11.0

  parent reply	other threads:[~2018-10-24  8:19 UTC|newest]

Thread overview: 86+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-24  8:18 [RFC 00/14] prefix network structures Olivier Matz
2018-10-24  8:18 ` [RFC 01/14] net: add rte prefix to arp structures Olivier Matz
2018-10-24  8:18 ` Olivier Matz [this message]
2018-10-24 14:53   ` [RFC 02/14] net: add rte prefix to arp defines Wiles, Keith
2018-10-26  7:25     ` Olivier Matz
2018-10-24  8:18 ` [RFC 03/14] net: add rte prefix to ether structures Olivier Matz
2018-12-20 22:04   ` Ferruh Yigit
2018-10-24  8:18 ` [RFC 04/14] net: add rte prefix to ether functions Olivier Matz
2018-10-24  8:18 ` [RFC 05/14] net: add rte prefix to ether defines Olivier Matz
2018-10-24  8:18 ` [RFC 06/14] net: add rte prefix to esp structure Olivier Matz
2018-10-24  8:18 ` [RFC 07/14] net: add rte prefix to gre structure Olivier Matz
2018-10-24  8:18 ` [RFC 08/14] net: add rte prefix to icmp structure Olivier Matz
2018-10-24  8:18 ` [RFC 09/14] net: add rte prefix to icmp defines Olivier Matz
2018-10-24  8:18 ` [RFC 10/14] net: add rte prefix to ip structure Olivier Matz
2018-10-24  8:18 ` [RFC 11/14] net: add rte prefix to ip defines Olivier Matz
2018-10-24  8:18 ` [RFC 12/14] net: add rte prefix to sctp structure Olivier Matz
2018-10-24  8:18 ` [RFC 13/14] net: add rte prefix to tcp structure Olivier Matz
2018-10-24  8:18 ` [RFC 14/14] net: add rte prefix to udp structure Olivier Matz
2018-10-24  8:32 ` [RFC 00/14] prefix network structures Olivier Matz
2018-10-24 14:56 ` Wiles, Keith
2018-10-26  7:22   ` Olivier Matz
2018-10-24 16:09 ` Stephen Hemminger
2018-10-24 16:39 ` Bruce Richardson
2018-10-26  7:20   ` Olivier Matz
2018-10-26 10:15     ` Bruce Richardson
2018-10-26 11:28       ` Olivier Matz
2018-10-24 18:38 ` Stephen Hemminger
2018-10-26  7:56   ` Olivier Matz
2018-12-20 21:59 ` Ferruh Yigit
2018-12-20 23:48   ` Stephen Hemminger
2018-12-21 14:38     ` Wiles, Keith
2018-12-21 15:14       ` Ferruh Yigit
2018-12-27  9:35         ` Olivier Matz
2019-02-13 11:48           ` Yigit, Ferruh
2019-02-18 12:37             ` Ferruh Yigit
2019-02-18 16:58               ` Olivier Matz
2019-04-10  8:32 ` [dpdk-dev] [RFC v2 " Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 01/14] net: add rte prefix to arp structures Olivier Matz
2019-04-22 16:00     ` Stephen Hemminger
2019-05-13 11:59       ` Olivier Matz
2019-04-22 16:03     ` Stephen Hemminger
2019-05-13 12:04       ` Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 02/14] net: add rte prefix to arp defines Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 03/14] net: add rte prefix to ether structures Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 04/14] net: add rte prefix to ether functions Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 05/14] net: add rte prefix to ether defines Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 06/14] net: add rte prefix to esp structure Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 07/14] net: add rte prefix to gre structure Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 08/14] net: add rte prefix to icmp structure Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 09/14] net: add rte prefix to icmp defines Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 10/14] net: add rte prefix to ip structure Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 11/14] net: add rte prefix to ip defines Olivier Matz
2019-04-22 16:05     ` Stephen Hemminger
2019-05-13 12:02       ` Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 12/14] net: add rte prefix to sctp structure Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 13/14] net: add rte prefix to tcp structure Olivier Matz
2019-04-10  8:32   ` [dpdk-dev] [RFC v2 14/14] net: add rte prefix to udp structure Olivier Matz
2019-05-20 17:11   ` [dpdk-dev] [RFC v2 00/14] prefix network structures Ferruh Yigit
2019-05-21 16:15     ` Olivier Matz
2019-05-21 16:13   ` [dpdk-dev] [PATCH 00/15] " Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 01/15] net: add rte prefix to arp structures Olivier Matz
2019-05-24 11:37       ` Ferruh Yigit
2019-05-21 16:13     ` [dpdk-dev] [PATCH 02/15] net: add rte prefix to arp defines Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 03/15] net: add rte prefix to ether structures Olivier Matz
2019-05-29  8:39       ` David Marchand
2019-05-21 16:13     ` [dpdk-dev] [PATCH 04/15] net: add rte prefix to ether functions Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 05/15] net: add rte prefix to ether defines Olivier Matz
2019-05-24 11:37       ` Ferruh Yigit
2019-05-21 16:13     ` [dpdk-dev] [PATCH 06/15] net: add rte prefix to esp structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 07/15] net: add rte prefix to gre structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 08/15] net: add rte prefix to icmp structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 09/15] net: add rte prefix to icmp defines Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 10/15] net: add rte prefix to ip structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 11/15] net: add rte prefix to ip defines Olivier Matz
2019-05-29  8:41       ` David Marchand
2019-05-21 16:13     ` [dpdk-dev] [PATCH 12/15] net: add rte prefix to sctp structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 13/15] net: add rte prefix to tcp structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 14/15] net: add rte prefix to udp structure Olivier Matz
2019-05-21 16:13     ` [dpdk-dev] [PATCH 15/15] doc: announce network api change Olivier Matz
2019-05-21 16:23     ` [dpdk-dev] [PATCH 00/15] prefix network structures Stephen Hemminger
2019-05-23 11:41     ` Maxime Coquelin
2019-05-24 11:38     ` Ferruh Yigit
2019-05-29  7:59       ` David Marchand
2019-05-29 14:46         ` Olivier Matz
2019-05-29 17:29           ` David Marchand
2019-05-29 21:15             ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181024081833.21432-3-olivier.matz@6wind.com \
    --to=olivier.matz@6wind.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.