All of lore.kernel.org
 help / color / mirror / Atom feed
From: Brian Masney <masneyb@onstation.org>
To: dmitry.torokhov@gmail.com, andy.gross@linaro.org, david.brown@linaro.org
Cc: robh+dt@kernel.org, mark.rutland@arm.com, masneyb@onstation.org,
	linux-input@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	devicetree@vger.kernel.org, jonathan@marek.ca
Subject: [PATCH v3 2/3] Input: add new vibrator driver for various MSM SOCs
Date: Wed, 24 Oct 2018 21:29:36 -0400	[thread overview]
Message-ID: <20181025012937.2154-3-masneyb@onstation.org> (raw)
In-Reply-To: <20181025012937.2154-1-masneyb@onstation.org>

This patch adds a new vibrator driver that supports various Qualcomm
MSM SOCs. Driver was tested on a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@onstation.org>
---
 drivers/input/misc/Kconfig        |  10 ++
 drivers/input/misc/Makefile       |   1 +
 drivers/input/misc/msm-vibrator.c | 276 ++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 drivers/input/misc/msm-vibrator.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index ca59a2be9bc5..e39aef84f357 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -117,6 +117,16 @@ config INPUT_E3X0_BUTTON
 	  To compile this driver as a module, choose M here: the
 	  module will be called e3x0_button.
 
+config INPUT_MSM_VIBRATOR
+	tristate "Qualcomm MSM vibrator driver"
+	select INPUT_FF_MEMLESS
+	help
+	  Support for the vibrator that is found on various Qualcomm MSM
+	  SOCs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called msm_vibrator.
+
 config INPUT_PCSPKR
 	tristate "PC Speaker support"
 	depends on PCSPKR_PLATFORM
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 9d0f9d1ff68f..96a6419cb1f2 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_INPUT_MAX8925_ONKEY)	+= max8925_onkey.o
 obj-$(CONFIG_INPUT_MAX8997_HAPTIC)	+= max8997_haptic.o
 obj-$(CONFIG_INPUT_MC13783_PWRBUTTON)	+= mc13783-pwrbutton.o
 obj-$(CONFIG_INPUT_MMA8450)		+= mma8450.o
+obj-$(CONFIG_INPUT_MSM_VIBRATOR)	+= msm-vibrator.o
 obj-$(CONFIG_INPUT_PALMAS_PWRBUTTON)	+= palmas-pwrbutton.o
 obj-$(CONFIG_INPUT_PCAP)		+= pcap_keys.o
 obj-$(CONFIG_INPUT_PCF50633_PMU)	+= pcf50633-input.o
diff --git a/drivers/input/misc/msm-vibrator.c b/drivers/input/misc/msm-vibrator.c
new file mode 100644
index 000000000000..bb862f30a780
--- /dev/null
+++ b/drivers/input/misc/msm-vibrator.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Qualcomm MSM vibrator driver
+ *
+ * Copyright (c) 2018 Brian Masney <masneyb@onstation.org>
+ *
+ * Based on qcom,pwm-vibrator.c from:
+ * Copyright (c) 2018 Jonathan Marek <jonathan@marek.ca>
+ *
+ * Based on msm_pwm_vibrator.c from downstream Android sources:
+ * Copyright (C) 2009-2014 LGE, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#define REG_CMD_RCGR           0x00
+#define REG_CFG_RCGR           0x04
+#define REG_M                  0x08
+#define REG_N                  0x0C
+#define REG_D                  0x10
+#define REG_CBCR               0x24
+#define MMSS_CC_M_DEFAULT      1
+
+struct msm_vibrator {
+	struct input_dev *input;
+	struct mutex mutex;
+	struct work_struct worker;
+	void __iomem *base;
+	struct regulator *vcc;
+	struct clk *clk;
+	struct gpio_desc *enable_gpio;
+	u16 magnitude;
+	bool enabled;
+};
+
+#define msm_vibrator_write(msm_vibrator, offset, value) \
+	writel((value), (void __iomem *)((msm_vibrator)->base + (offset)))
+
+static int msm_vibrator_start(struct msm_vibrator *vibrator)
+{
+	int d_reg_val, ret = 0;
+
+	mutex_lock(&vibrator->mutex);
+
+	if (!vibrator->enabled) {
+		ret = clk_set_rate(vibrator->clk, 24000);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to set clock rate: %d\n", ret);
+			goto unlock;
+		}
+
+		ret = clk_prepare_enable(vibrator->clk);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to enable clock: %d\n", ret);
+			goto unlock;
+		}
+
+		ret = regulator_enable(vibrator->vcc);
+		if (ret) {
+			dev_err(&vibrator->input->dev,
+				"Failed to enable regulator: %d\n", ret);
+			clk_disable(vibrator->clk);
+			goto unlock;
+		}
+
+		gpiod_set_value_cansleep(vibrator->enable_gpio, 1);
+
+		vibrator->enabled = true;
+	}
+
+	d_reg_val = 127 - ((126 * vibrator->magnitude) / 0xffff);
+	msm_vibrator_write(vibrator, REG_CFG_RCGR,
+			   (2 << 12) | /* dual edge mode */
+			   (0 << 8) |  /* cxo */
+			   (7 << 0));
+	msm_vibrator_write(vibrator, REG_M, 1);
+	msm_vibrator_write(vibrator, REG_N, 128);
+	msm_vibrator_write(vibrator, REG_D, d_reg_val);
+	msm_vibrator_write(vibrator, REG_CMD_RCGR, 1);
+	msm_vibrator_write(vibrator, REG_CBCR, 1);
+
+unlock:
+	mutex_unlock(&vibrator->mutex);
+
+	return ret;
+}
+
+static void msm_vibrator_stop(struct msm_vibrator *vibrator)
+{
+	mutex_lock(&vibrator->mutex);
+
+	if (vibrator->enabled) {
+		gpiod_set_value_cansleep(vibrator->enable_gpio, 0);
+		regulator_disable(vibrator->vcc);
+		clk_disable(vibrator->clk);
+		vibrator->enabled = false;
+	}
+
+	mutex_unlock(&vibrator->mutex);
+}
+
+static void msm_vibrator_worker(struct work_struct *work)
+{
+	struct msm_vibrator *vibrator = container_of(work,
+						     struct msm_vibrator,
+						     worker);
+
+	if (vibrator->magnitude)
+		msm_vibrator_start(vibrator);
+	else
+		msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_play_effect(struct input_dev *dev, void *data,
+				    struct ff_effect *effect)
+{
+	struct msm_vibrator *vibrator = input_get_drvdata(dev);
+
+	mutex_lock(&vibrator->mutex);
+
+	if (effect->u.rumble.strong_magnitude > 0)
+		vibrator->magnitude = effect->u.rumble.strong_magnitude;
+	else
+		vibrator->magnitude = effect->u.rumble.weak_magnitude;
+
+	mutex_unlock(&vibrator->mutex);
+
+	schedule_work(&vibrator->worker);
+
+	return 0;
+}
+
+static void msm_vibrator_close(struct input_dev *input)
+{
+	struct msm_vibrator *vibrator = input_get_drvdata(input);
+
+	cancel_work_sync(&vibrator->worker);
+	msm_vibrator_stop(vibrator);
+}
+
+static int msm_vibrator_probe(struct platform_device *pdev)
+{
+	struct msm_vibrator *vibrator;
+	struct resource *res;
+	int ret;
+
+	vibrator = devm_kzalloc(&pdev->dev, sizeof(*vibrator), GFP_KERNEL);
+	if (!vibrator)
+		return -ENOMEM;
+
+	vibrator->input = devm_input_allocate_device(&pdev->dev);
+	if (!vibrator->input)
+		return -ENOMEM;
+
+	vibrator->vcc = devm_regulator_get(&pdev->dev, "vcc");
+	if (IS_ERR(vibrator->vcc)) {
+		if (PTR_ERR(vibrator->vcc) != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Failed to get regulator: %ld\n",
+				PTR_ERR(vibrator->vcc));
+		return PTR_ERR(vibrator->vcc);
+	}
+
+	vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable",
+					       GPIOD_OUT_LOW);
+	if (IS_ERR(vibrator->enable_gpio)) {
+		dev_err(&pdev->dev, "Failed to get enable gpio: %ld\n",
+			PTR_ERR(vibrator->enable_gpio));
+		return PTR_ERR(vibrator->enable_gpio);
+	}
+
+	vibrator->clk = devm_clk_get(&pdev->dev, "pwm");
+	if (IS_ERR(vibrator->clk)) {
+		dev_err(&pdev->dev, "Failed to lookup pwm clock: %ld\n",
+			PTR_ERR(vibrator->clk));
+		return PTR_ERR(vibrator->clk);
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Failed to get platform resource\n");
+		return -ENODEV;
+	}
+
+	vibrator->base = devm_ioremap(&pdev->dev, res->start,
+				     resource_size(res));
+	if (IS_ERR(vibrator->base)) {
+		dev_err(&pdev->dev, "Failed to iomap resource: %ld\n",
+			PTR_ERR(vibrator->base));
+		return PTR_ERR(vibrator->base);
+	}
+
+	vibrator->enabled = false;
+	mutex_init(&vibrator->mutex);
+	INIT_WORK(&vibrator->worker, msm_vibrator_worker);
+
+	vibrator->input->name = "msm-vibrator";
+	vibrator->input->id.bustype = BUS_HOST;
+	vibrator->input->dev.parent = &pdev->dev;
+	vibrator->input->close = msm_vibrator_close;
+
+	input_set_drvdata(vibrator->input, vibrator);
+	input_set_capability(vibrator->input, EV_FF, FF_RUMBLE);
+
+	ret = input_ff_create_memless(vibrator->input, NULL,
+				      msm_vibrator_play_effect);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to create ff memless: %d", ret);
+		return ret;
+	}
+
+	ret = input_register_device(vibrator->input);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to register input device: %d", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, vibrator);
+
+	return 0;
+}
+
+static int __maybe_unused msm_vibrator_suspend(struct device *dev)
+{
+	struct msm_vibrator *vibrator = dev_get_drvdata(dev);
+
+	cancel_work_sync(&vibrator->worker);
+
+	if (vibrator->enabled)
+		msm_vibrator_stop(vibrator);
+
+	return 0;
+}
+
+static int __maybe_unused msm_vibrator_resume(struct device *dev)
+{
+	struct msm_vibrator *vibrator = dev_get_drvdata(dev);
+
+	if (vibrator->enabled)
+		msm_vibrator_start(vibrator);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(msm_vibrator_pm_ops, msm_vibrator_suspend,
+			 msm_vibrator_resume);
+
+static const struct of_device_id msm_vibrator_of_match[] = {
+	{ .compatible = "qcom,msm8226-vibrator" },
+	{ .compatible = "qcom,msm8974-vibrator" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, msm_vibrator_of_match);
+
+static struct platform_driver msm_vibrator_driver = {
+	.probe	= msm_vibrator_probe,
+	.driver	= {
+		.name = "msm-vibrator",
+		.pm = &msm_vibrator_pm_ops,
+		.of_match_table = of_match_ptr(msm_vibrator_of_match),
+	},
+};
+module_platform_driver(msm_vibrator_driver);
+
+MODULE_AUTHOR("Brian Masney <masneyb@onstation.org>");
+MODULE_DESCRIPTION("Qualcomm MSM vibrator driver");
+MODULE_LICENSE("GPL");
-- 
2.17.2

  parent reply	other threads:[~2018-10-25  1:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-25  1:29 [PATCH v3 0/3] ARM: qcom: add vibrator support for various MSM SOCs Brian Masney
2018-10-25  1:29 ` [PATCH v3 1/3] dt-bindings: Input: new bindings for MSM vibrator Brian Masney
2018-10-25 21:44   ` Rob Herring
2018-10-25 21:44     ` Rob Herring
2018-10-25  1:29 ` Brian Masney [this message]
2019-02-05  9:26   ` [PATCH v3 2/3] Input: add new vibrator driver for various MSM SOCs Brian Masney
2019-02-05 19:42   ` Dmitry Torokhov
2019-02-06  0:52     ` Brian Masney
2018-10-25  1:29 ` [PATCH v3 3/3] ARM: dts: qcom: msm8974-hammerhead: add device tree bindings for vibrator Brian Masney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181025012937.2154-3-masneyb@onstation.org \
    --to=masneyb@onstation.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=jonathan@marek.ca \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.