From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ding Tao Subject: [PATCH 2/2] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin Date: Fri, 26 Oct 2018 11:50:28 +0000 Message-ID: <20181026115028.193203-2-miyatsu@qq.com> References: <20181026115028.193203-1-miyatsu@qq.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20181026115028.193203-1-miyatsu@qq.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: jason@lakedaemon.net Cc: mark.rutland@arm.com, andrew@lunn.ch, devicetree@vger.kernel.org, gregory.clement@bootlin.com, linux-kernel@vger.kernel.org, robh+dt@kernel.org, miyatsu@qq.com, linux-arm-kernel@lists.infradead.org, sebastian.hesselbarth@gmail.com List-Id: devicetree@vger.kernel.org The ESPRESSObin board has a emmc interface available on U11, let's enable it. Signed-off-by: Ding Tao --- .../dts/marvell/armada-3720-espressobin.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 3ab25ad402b9..ee05aabbba88 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -60,6 +60,24 @@ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; marvell,pad-type = "sd"; vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; status = "okay"; }; -- 2.17.1 From mboxrd@z Thu Jan 1 00:00:00 1970 From: miyatsu@qq.com (Ding Tao) Date: Fri, 26 Oct 2018 11:50:28 +0000 Subject: [PATCH 2/2] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin In-Reply-To: <20181026115028.193203-1-miyatsu@qq.com> References: <20181026115028.193203-1-miyatsu@qq.com> Message-ID: <20181026115028.193203-2-miyatsu@qq.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The ESPRESSObin board has a emmc interface available on U11, let's enable it. Signed-off-by: Ding Tao --- .../dts/marvell/armada-3720-espressobin.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts index 3ab25ad402b9..ee05aabbba88 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts @@ -60,6 +60,24 @@ cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; marvell,pad-type = "sd"; vqmmc-supply = <&vcc_sd_reg1>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; + status = "okay"; +}; + +/* U11 */ +&sdhci0 { + non-removable; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,xenon-emmc; + marvell,xenon-tun-count = <9>; + marvell,pad-type = "fixed-1-8v"; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pins>; status = "okay"; }; -- 2.17.1