All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
To: stefan.wahren@i2se.com, eric@anholt.net, dave.stevenson@raspberrypi.org
Cc: nsaenzjulienne@suse.de, linux-rpi-kernel@lists.infradead.org,
	gregkh@linuxfoundation.org, linux-arm-kernel@lists.infradead.org,
	devel@driverdev.osuosl.org, linux-kernel@vger.kernel.org
Subject: [PATCH RFC 00/18] staging: vchiq: remove dead code & misc fixes
Date: Fri, 26 Oct 2018 15:47:55 +0200	[thread overview]
Message-ID: <20181026134813.7775-1-nsaenzjulienne@suse.de> (raw)

Hi All,

This series was written in parallel with reading and understanding the
vchiq code. So excuse me for the lack of logic in the sequence of
patches.

It's an RFC for various reasons, first I think it's going to clash with
the last Stefan's series. Also I'm not used to doing big series.

The main focus was to delete as much code as possible, I've counted
around 550 lines, which is not bad. Apart from that there are some
patches enforcing proper kernel APIs usage.

The only patch that really changes code is the
vchiq_ioc_copy_element_data() rewrite, I was having doubts whether to
add it into the series, but since it's a RFC, I don't think it hurts.

The last commit updates the TODO list with some of my observations, I
realise some of the might be a little opinionated. If anything it's
going to force a discussion on the topic, which is nice.

The series was developed on top of linux-next, and was tested on a
RPIv3B+ with audio, video and running vchiq_test.

Regards,
Nicolas

===

Nicolas Saenz Julienne (18):
  staging: vchiq_core: rework vchiq_get_config
  staging: vchiq_arm: rework close/remove_service IOCTLS
  staging: vchiq_shim: delete vchi_service_create
  stagning: vchiq_arm: use list_for_each_entry when accessing
    bulk_waiter_list
  staging: vchiq_arm: get rid of vchi_mh.h
  staging: vchiq_arm: rework vchiq_ioc_copy_element_data
  staging: vchiq-core: get rid of is_master distinction
  staging: vchiq_core: remove unnecessary safety checks in
    vchiq_init_state
  staging: vchiq_core: do not initialize semaphores twice
  staging: vchiq_core: don't add a wmb() before remote_event_signal()
  staging: vchiq_arm: use completions instead of semaphores
  staging: vchiq_util: use completions instead of semaphores
  staging: vchiq_core: use completions instead of semaphores
  staging: vchiq_util: get rid of unneeded memory barriers
  stagning: vchiq_core: fix logic redundancy in parse_open
  staging: vchiq_arm: rework probe and init functions
  staging: vchiq_arm: fix open/release cdev functions
  staging: vchiq: add more tasks to the TODO list

 .../staging/vc04_services/interface/vchi/TODO |  46 +-
 .../vc04_services/interface/vchi/vchi.h       |   8 -
 .../vc04_services/interface/vchi/vchi_mh.h    |  42 --
 .../interface/vchiq_arm/vchiq_2835_arm.c      |  18 +-
 .../interface/vchiq_arm/vchiq_arm.c           | 598 ++++++++----------
 .../interface/vchiq_arm/vchiq_core.c          | 511 +++------------
 .../interface/vchiq_arm/vchiq_core.h          |  47 +-
 .../interface/vchiq_arm/vchiq_if.h            |  11 +-
 .../interface/vchiq_arm/vchiq_shim.c          |  32 -
 .../interface/vchiq_arm/vchiq_util.c          |  48 +-
 .../interface/vchiq_arm/vchiq_util.h          |   6 +-
 11 files changed, 429 insertions(+), 938 deletions(-)
 delete mode 100644 drivers/staging/vc04_services/interface/vchi/vchi_mh.h

-- 
2.19.1


WARNING: multiple messages have this Message-ID
From: nsaenzjulienne@suse.de (Nicolas Saenz Julienne)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH RFC 00/18] staging: vchiq: remove dead code & misc fixes
Date: Fri, 26 Oct 2018 15:47:55 +0200	[thread overview]
Message-ID: <20181026134813.7775-1-nsaenzjulienne@suse.de> (raw)

Hi All,

This series was written in parallel with reading and understanding the
vchiq code. So excuse me for the lack of logic in the sequence of
patches.

It's an RFC for various reasons, first I think it's going to clash with
the last Stefan's series. Also I'm not used to doing big series.

The main focus was to delete as much code as possible, I've counted
around 550 lines, which is not bad. Apart from that there are some
patches enforcing proper kernel APIs usage.

The only patch that really changes code is the
vchiq_ioc_copy_element_data() rewrite, I was having doubts whether to
add it into the series, but since it's a RFC, I don't think it hurts.

The last commit updates the TODO list with some of my observations, I
realise some of the might be a little opinionated. If anything it's
going to force a discussion on the topic, which is nice.

The series was developed on top of linux-next, and was tested on a
RPIv3B+ with audio, video and running vchiq_test.

Regards,
Nicolas

===

Nicolas Saenz Julienne (18):
  staging: vchiq_core: rework vchiq_get_config
  staging: vchiq_arm: rework close/remove_service IOCTLS
  staging: vchiq_shim: delete vchi_service_create
  stagning: vchiq_arm: use list_for_each_entry when accessing
    bulk_waiter_list
  staging: vchiq_arm: get rid of vchi_mh.h
  staging: vchiq_arm: rework vchiq_ioc_copy_element_data
  staging: vchiq-core: get rid of is_master distinction
  staging: vchiq_core: remove unnecessary safety checks in
    vchiq_init_state
  staging: vchiq_core: do not initialize semaphores twice
  staging: vchiq_core: don't add a wmb() before remote_event_signal()
  staging: vchiq_arm: use completions instead of semaphores
  staging: vchiq_util: use completions instead of semaphores
  staging: vchiq_core: use completions instead of semaphores
  staging: vchiq_util: get rid of unneeded memory barriers
  stagning: vchiq_core: fix logic redundancy in parse_open
  staging: vchiq_arm: rework probe and init functions
  staging: vchiq_arm: fix open/release cdev functions
  staging: vchiq: add more tasks to the TODO list

 .../staging/vc04_services/interface/vchi/TODO |  46 +-
 .../vc04_services/interface/vchi/vchi.h       |   8 -
 .../vc04_services/interface/vchi/vchi_mh.h    |  42 --
 .../interface/vchiq_arm/vchiq_2835_arm.c      |  18 +-
 .../interface/vchiq_arm/vchiq_arm.c           | 598 ++++++++----------
 .../interface/vchiq_arm/vchiq_core.c          | 511 +++------------
 .../interface/vchiq_arm/vchiq_core.h          |  47 +-
 .../interface/vchiq_arm/vchiq_if.h            |  11 +-
 .../interface/vchiq_arm/vchiq_shim.c          |  32 -
 .../interface/vchiq_arm/vchiq_util.c          |  48 +-
 .../interface/vchiq_arm/vchiq_util.h          |   6 +-
 11 files changed, 429 insertions(+), 938 deletions(-)
 delete mode 100644 drivers/staging/vc04_services/interface/vchi/vchi_mh.h

-- 
2.19.1

             reply	other threads:[~2018-10-26 13:48 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-26 13:47 Nicolas Saenz Julienne [this message]
2018-10-26 13:47 ` Nicolas Saenz Julienne
2018-10-26 13:47 ` [PATCH RFC 01/18] staging: vchiq_core: rework vchiq_get_config Nicolas Saenz Julienne
2018-10-26 13:47   ` Nicolas Saenz Julienne
2018-10-26 13:47 ` [PATCH RFC 02/18] staging: vchiq_arm: rework close/remove_service IOCTLS Nicolas Saenz Julienne
2018-10-26 13:47   ` Nicolas Saenz Julienne
2018-10-26 13:47 ` [PATCH RFC 03/18] staging: vchiq_shim: delete vchi_service_create Nicolas Saenz Julienne
2018-10-26 13:47   ` Nicolas Saenz Julienne
2018-10-26 13:47 ` [PATCH RFC 04/18] stagning: vchiq_arm: use list_for_each_entry when accessing bulk_waiter_list Nicolas Saenz Julienne
2018-10-26 13:47   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 05/18] staging: vchiq_arm: get rid of vchi_mh.h Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 06/18] staging: vchiq_arm: rework vchiq_ioc_copy_element_data Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 07/18] staging: vchiq-core: get rid of is_master distinction Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 08/18] staging: vchiq_core: remove unnecessary safety checks in vchiq_init_state Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 09/18] staging: vchiq_core: do not initialize semaphores twice Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-28 20:45   ` Stefan Wahren
2018-10-28 20:45     ` Stefan Wahren
2018-11-06 15:41     ` Nicolas Saenz Julienne
2018-11-06 15:41       ` Nicolas Saenz Julienne
2018-11-06 16:06       ` Stefan Wahren
2018-11-06 16:06         ` Stefan Wahren
2018-11-06 18:28         ` Nicolas Saenz Julienne
2018-11-06 18:28           ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 10/18] staging: vchiq_core: don't add a wmb() before remote_event_signal() Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 11/18] staging: vchiq_arm: use completions instead of semaphores Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-28 21:00   ` Stefan Wahren
2018-10-28 21:00     ` Stefan Wahren
2018-10-26 13:48 ` [PATCH RFC 12/18] staging: vchiq_util: " Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 13/18] staging: vchiq_core: " Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 14/18] staging: vchiq_util: get rid of unneeded memory barriers Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 15/18] stagning: vchiq_core: fix logic redundancy in parse_open Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-28 20:58   ` Stefan Wahren
2018-10-28 20:58     ` Stefan Wahren
2018-10-26 13:48 ` [PATCH RFC 16/18] staging: vchiq_arm: rework probe and init functions Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-28 21:02   ` Stefan Wahren
2018-10-28 21:02     ` Stefan Wahren
2018-10-26 13:48 ` [PATCH RFC 17/18] staging: vchiq_arm: fix open/release cdev functions Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-26 13:48 ` [PATCH RFC 18/18] staging: vchiq: add more tasks to the TODO list Nicolas Saenz Julienne
2018-10-26 13:48   ` Nicolas Saenz Julienne
2018-10-28 21:11   ` Stefan Wahren
2018-10-28 21:11     ` Stefan Wahren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181026134813.7775-1-nsaenzjulienne@suse.de \
    --to=nsaenzjulienne@suse.de \
    --cc=dave.stevenson@raspberrypi.org \
    --cc=devel@driverdev.osuosl.org \
    --cc=eric@anholt.net \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rpi-kernel@lists.infradead.org \
    --cc=stefan.wahren@i2se.com \
    --subject='Re: [PATCH RFC 00/18] staging: vchiq: remove dead code & misc fixes' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.