All of lore.kernel.org
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: robh@kernel.org, heiko@sntech.de, ezequiel@collabora.com,
	xuwei5@hisilicon.com, michal.simek@xilinx.com, pavel@ucw.cz,
	andy.gross@linaro.org
Cc: linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	daniel.thompson@linaro.org, amit.kucheria@linaro.org,
	linus.walleij@linaro.org, koen.kooi@linaro.org,
	nicolas.dechesne@linaro.org,
	Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Subject: [PATCH v2 2/7] arm64: dts: rockchip: rock960: Add on-board LED support
Date: Mon, 29 Oct 2018 14:30:01 +0530	[thread overview]
Message-ID: <20181029090006.4353-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181029090006.4353-1-manivannan.sadhasivam@linaro.org>

Add on-board LED support for Rock960 board based on the following
standard used by rest of the 96Boards:

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../boot/dts/rockchip/rk3399-rock960.dts      | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
index 3c3308daec98..12285c51cceb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -13,6 +13,53 @@
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+			    <&user_led4>, <&wlan_led>, <&bt_led>;
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&gpio4 RK_PC2 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&gpio4 RK_PC6 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&gpio4 RK_PD0 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&gpio4 RK_PD4 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 RK_PD5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio4 RK_PD6 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
 };
 
 &pcie0 {
@@ -20,6 +67,38 @@
 };
 
 &pinctrl {
+	leds {
+		user_led1: user_led1 {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user_led2 {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3: user_led3 {
+			rockchip,pins =
+				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4: user_led4 {
+			rockchip,pins =
+				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led: wlan_led {
+			rockchip,pins =
+				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led: bt_led {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pcie {
 		pcie_drv: pcie-drv {
 			rockchip,pins =
-- 
2.17.1

WARNING: multiple messages have this Message-ID
From: manivannan.sadhasivam@linaro.org (Manivannan Sadhasivam)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/7] arm64: dts: rockchip: rock960: Add on-board LED support
Date: Mon, 29 Oct 2018 14:30:01 +0530	[thread overview]
Message-ID: <20181029090006.4353-3-manivannan.sadhasivam@linaro.org> (raw)
In-Reply-To: <20181029090006.4353-1-manivannan.sadhasivam@linaro.org>

Add on-board LED support for Rock960 board based on the following
standard used by rest of the 96Boards:

green:user1  default-trigger: heartbeat
green:user2  default-trigger: mmc0/disk-activity(onboard-storage)
green:user3  default-trigger: mmc1 (SD-card)
green:user4  default-trigger: none, panic-indicator
yellow:wlan  default-trigger: phy0tx
blue:bt      default-trigger: hci0-power

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 .../boot/dts/rockchip/rk3399-rock960.dts      | 79 +++++++++++++++++++
 1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
index 3c3308daec98..12285c51cceb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dts
@@ -13,6 +13,53 @@
 	chosen {
 		stdout-path = "serial2:1500000n8";
 	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+			    <&user_led4>, <&wlan_led>, <&bt_led>;
+
+		user_led1 {
+			label = "green:user1";
+			gpios = <&gpio4 RK_PC2 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		user_led2 {
+			label = "green:user2";
+			gpios = <&gpio4 RK_PC6 0>;
+			linux,default-trigger = "mmc0";
+		};
+
+		user_led3 {
+			label = "green:user3";
+			gpios = <&gpio4 RK_PD0 0>;
+			linux,default-trigger = "mmc1";
+		};
+
+		user_led4 {
+			label = "green:user4";
+			gpios = <&gpio4 RK_PD4 0>;
+			panic-indicator;
+			linux,default-trigger = "none";
+		};
+
+		wlan_active_led {
+			label = "yellow:wlan";
+			gpios = <&gpio4 RK_PD5 0>;
+			linux,default-trigger = "phy0tx";
+			default-state = "off";
+		};
+
+		bt_active_led {
+			label = "blue:bt";
+			gpios = <&gpio4 RK_PD6 0>;
+			linux,default-trigger = "hci0-power";
+			default-state = "off";
+		};
+	};
+
 };
 
 &pcie0 {
@@ -20,6 +67,38 @@
 };
 
 &pinctrl {
+	leds {
+		user_led1: user_led1 {
+			rockchip,pins =
+				<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led2: user_led2 {
+			rockchip,pins =
+				<4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led3: user_led3 {
+			rockchip,pins =
+				<4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		user_led4: user_led4 {
+			rockchip,pins =
+				<4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wlan_led: wlan_led {
+			rockchip,pins =
+				<4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_led: bt_led {
+			rockchip,pins =
+				<4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pcie {
 		pcie_drv: pcie-drv {
 			rockchip,pins =
-- 
2.17.1

  parent reply	other threads:[~2018-10-29  9:00 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-10-29  8:59 [PATCH v2 0/7] Standardize onboard LED support for 96Boards Manivannan Sadhasivam
2018-10-29  8:59 ` Manivannan Sadhasivam
2018-10-29  9:00 ` [PATCH v2 1/7] arm64: dts: rockchip: ficus: Add on-board LED support Manivannan Sadhasivam
2018-10-29  9:00   ` Manivannan Sadhasivam
2018-10-29  9:00 ` Manivannan Sadhasivam [this message]
2018-10-29  9:00   ` [PATCH v2 2/7] arm64: dts: rockchip: rock960: " Manivannan Sadhasivam
2018-10-29  9:00 ` [PATCH v2 3/7] arm64: dts: hisilicon: hikey: Standardize LED labels and triggers Manivannan Sadhasivam
2018-10-29  9:00   ` Manivannan Sadhasivam
2018-10-29  9:00 ` [PATCH v2 4/7] arm64: dts: hisilicon: hikey960: " Manivannan Sadhasivam
2018-10-29  9:00   ` Manivannan Sadhasivam
2018-10-29  9:00 ` [PATCH v2 5/7] arm64: dts: hisilicon: poplar: " Manivannan Sadhasivam
2018-10-29  9:00   ` Manivannan Sadhasivam
2018-10-29  9:00 ` [PATCH v2 6/7] arm64: dts: xilinx: ultra96: " Manivannan Sadhasivam
2018-10-29  9:00   ` Manivannan Sadhasivam
2018-10-29  9:00 ` [PATCH v2 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels Manivannan Sadhasivam
2018-10-29  9:00   ` Manivannan Sadhasivam
2018-10-29  9:17   ` Amit Kucheria
2018-10-29  9:17     ` Amit Kucheria
2018-10-29  9:17     ` Amit Kucheria
2018-10-29  9:32     ` Manivannan Sadhasivam
2018-10-29  9:32       ` Manivannan Sadhasivam
2018-10-29  9:32       ` Manivannan Sadhasivam

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181029090006.4353-3-manivannan.sadhasivam@linaro.org \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=amit.kucheria@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=daniel.thompson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=ezequiel@collabora.com \
    --cc=heiko@sntech.de \
    --cc=koen.kooi@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=nicolas.dechesne@linaro.org \
    --cc=pavel@ucw.cz \
    --cc=robh@kernel.org \
    --cc=xuwei5@hisilicon.com \
    --subject='Re: [PATCH v2 2/7] arm64: dts: rockchip: rock960: Add on-board LED support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.