All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alejandro Lucero <alejandro.lucero@netronome.com>
To: dev@dpdk.org
Subject: [PATCH v2 7/7] mem: add thread unsafe version for checking DMA mask
Date: Thu,  1 Nov 2018 19:53:30 +0000	[thread overview]
Message-ID: <20181101195330.19464-8-alejandro.lucero@netronome.com> (raw)
In-Reply-To: <20181101195330.19464-1-alejandro.lucero@netronome.com>

During memory initialization calling rte_mem_check_dma_mask
leads to a deadlock because memory_hotplug_lock is locked by a
writer, the current code in execution, and rte_memseg_walk
tries to lock as a reader.

This patch adds a thread_unsafe version which will call the final
function specifying the memory_hotplug_lock does not need to be
acquired. The patch also modified rte_mem_check_dma_mask as a
intermediate step which will call the final function as before,
implying memory_hotplug_lock will be acquired.

PMDs should always use the version acquiring the lock with the
thread_unsafe one being just for internal EAL memory code.

Fixes: 223b7f1d5ef6 ("mem: add function for checking memseg IOVA")

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
---
 lib/librte_eal/common/eal_common_memory.c  | 24 +++++++++++++--
 lib/librte_eal/common/include/rte_memory.h | 35 +++++++++++++++++++---
 lib/librte_eal/common/malloc_heap.c        |  2 +-
 lib/librte_eal/linuxapp/eal/eal_memory.c   |  4 +--
 lib/librte_eal/rte_eal_version.map         |  1 +
 5 files changed, 56 insertions(+), 10 deletions(-)

diff --git a/lib/librte_eal/common/eal_common_memory.c b/lib/librte_eal/common/eal_common_memory.c
index cc4f1d80f..87fd9921f 100644
--- a/lib/librte_eal/common/eal_common_memory.c
+++ b/lib/librte_eal/common/eal_common_memory.c
@@ -446,11 +446,12 @@ check_iova(const struct rte_memseg_list *msl __rte_unused,
 #endif
 
 /* check memseg iovas are within the required range based on dma mask */
-int __rte_experimental
-rte_mem_check_dma_mask(uint8_t maskbits)
+static int __rte_experimental
+check_dma_mask(uint8_t maskbits, bool thread_unsafe)
 {
 	struct rte_mem_config *mcfg = rte_eal_get_configuration()->mem_config;
 	uint64_t mask;
+	int ret;
 
 	/* sanity check */
 	if (maskbits > MAX_DMA_MASK_BITS) {
@@ -462,7 +463,12 @@ rte_mem_check_dma_mask(uint8_t maskbits)
 	/* create dma mask */
 	mask = ~((1ULL << maskbits) - 1);
 
-	if (rte_memseg_walk(check_iova, &mask))
+	if (thread_unsafe)
+		ret = rte_memseg_walk_thread_unsafe(check_iova, &mask);
+	else
+		ret = rte_memseg_walk(check_iova, &mask);
+
+	if (ret)
 		/*
 		 * Dma mask precludes hugepage usage.
 		 * This device can not be used and we do not need to keep
@@ -480,6 +486,18 @@ rte_mem_check_dma_mask(uint8_t maskbits)
 	return 0;
 }
 
+int __rte_experimental
+rte_mem_check_dma_mask(uint8_t maskbits)
+{
+	return check_dma_mask(maskbits, false);
+}
+
+int __rte_experimental
+rte_mem_check_dma_mask_thread_unsafe(uint8_t maskbits)
+{
+	return check_dma_mask(maskbits, true);
+}
+
 /*
  * Set dma mask to use when memory initialization is done.
  *
diff --git a/lib/librte_eal/common/include/rte_memory.h b/lib/librte_eal/common/include/rte_memory.h
index abbfe2364..d970825df 100644
--- a/lib/librte_eal/common/include/rte_memory.h
+++ b/lib/librte_eal/common/include/rte_memory.h
@@ -463,16 +463,43 @@ unsigned rte_memory_get_nchannel(void);
  */
 unsigned rte_memory_get_nrank(void);
 
-/* check memsegs iovas are within a range based on dma mask */
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ * Check if all currently allocated memory segments are compliant with
+ * supplied DMA address width.
+ *
+ *  @param maskbits
+ *    Address width to check against.
+ */
 int __rte_experimental rte_mem_check_dma_mask(uint8_t maskbits);
 
 /**
  * @warning
  * @b EXPERIMENTAL: this API may change without prior notice
  *
- *  Set dma mask to use once memory initialization is done.
- *  Previous function rte_mem_check_dma_mask can not be used
- *  safely until memory has been initialized.
+ * Check if all currently allocated memory segments are compliant with
+ * supplied DMA address width. This function will use
+ * rte_memseg_walk_thread_unsafe instead of rte_memseg_walk implying
+ * memory_hotplug_lock will not be acquired avoiding deadlock during
+ * memory initialization.
+ *
+ * This function is just for EAL core memory internal use. Drivers should
+ * use the previous rte_mem_check_dma_mask.
+ *
+ *  @param maskbits
+ *    Address width to check against.
+ */
+int __rte_experimental rte_mem_check_dma_mask_thread_unsafe(uint8_t maskbits);
+
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice
+ *
+ *  Set dma mask to use once memory initialization is done. Previous functions
+ *  rte_mem_check_dma_mask and rte_mem_check_dma_mask_thread_unsafe can not be
+ *  used safely until memory has been initialized.
  */
 void __rte_experimental rte_mem_set_dma_mask(uint8_t maskbits);
 
diff --git a/lib/librte_eal/common/malloc_heap.c b/lib/librte_eal/common/malloc_heap.c
index c2c112aa6..c6a6d4f6b 100644
--- a/lib/librte_eal/common/malloc_heap.c
+++ b/lib/librte_eal/common/malloc_heap.c
@@ -334,7 +334,7 @@ alloc_pages_on_heap(struct malloc_heap *heap, uint64_t pg_sz, size_t elt_size,
 	 * executed. For 2) implies the new memory can not be added.
 	 */
 	if (mcfg->dma_maskbits &&
-	    rte_mem_check_dma_mask(mcfg->dma_maskbits)) {
+	    rte_mem_check_dma_mask_thread_unsafe(mcfg->dma_maskbits)) {
 		/*
 		 * Currently this can only happen if IOMMU is enabled
 		 * and the address width supported by the IOMMU hw is
diff --git a/lib/librte_eal/linuxapp/eal/eal_memory.c b/lib/librte_eal/linuxapp/eal/eal_memory.c
index c7935879a..c1b5e0791 100644
--- a/lib/librte_eal/linuxapp/eal/eal_memory.c
+++ b/lib/librte_eal/linuxapp/eal/eal_memory.c
@@ -1394,7 +1394,7 @@ eal_legacy_hugepage_init(void)
 			addr = RTE_PTR_ADD(addr, (size_t)page_sz);
 		}
 		if (mcfg->dma_maskbits &&
-		    rte_mem_check_dma_mask(mcfg->dma_maskbits)) {
+		    rte_mem_check_dma_mask_thread_unsafe(mcfg->dma_maskbits)) {
 			RTE_LOG(ERR, EAL,
 				"%s(): couldnt allocate memory due to IOVA exceeding limits of current DMA mask.\n",
 				__func__);
@@ -1641,7 +1641,7 @@ eal_legacy_hugepage_init(void)
 	}
 
 	if (mcfg->dma_maskbits &&
-	    rte_mem_check_dma_mask(mcfg->dma_maskbits)) {
+	    rte_mem_check_dma_mask_thread_unsafe(mcfg->dma_maskbits)) {
 		RTE_LOG(ERR, EAL,
 			"%s(): couldn't allocate memory due to IOVA exceeding limits of current DMA mask.\n",
 			__func__);
diff --git a/lib/librte_eal/rte_eal_version.map b/lib/librte_eal/rte_eal_version.map
index 51ee948ba..61bc5ca05 100644
--- a/lib/librte_eal/rte_eal_version.map
+++ b/lib/librte_eal/rte_eal_version.map
@@ -331,6 +331,7 @@ EXPERIMENTAL {
 	rte_mem_alloc_validator_register;
 	rte_mem_alloc_validator_unregister;
 	rte_mem_check_dma_mask;
+	rte_mem_check_dma_mask_thread_unsafe;
 	rte_mem_event_callback_register;
 	rte_mem_event_callback_unregister;
 	rte_mem_iova2virt;
-- 
2.17.1

  parent reply	other threads:[~2018-11-01 19:53 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 19:53 [PATCH v2 0/7] fix DMA mask check Alejandro Lucero
2018-11-01 19:53 ` [PATCH v2 1/7] mem: fix call to " Alejandro Lucero
2018-11-01 19:53 ` [PATCH v2 2/7] mem: use proper prefix Alejandro Lucero
2018-11-01 19:53 ` [PATCH v2 3/7] mem: add function for setting DMA mask Alejandro Lucero
2018-11-01 19:53 ` [PATCH v2 4/7] bus/pci: avoid call to DMA mask check Alejandro Lucero
2018-11-01 19:53 ` [PATCH v2 5/7] mem: modify error message for " Alejandro Lucero
2018-11-05 10:01   ` Li, WenjieX A
2018-11-05 10:13     ` Alejandro Lucero
2018-11-05 15:12       ` Burakov, Anatoly
2018-11-05 15:33         ` Alejandro Lucero
2018-11-05 16:34           ` Burakov, Anatoly
2018-11-06  9:32             ` Alejandro Lucero
2018-11-06 10:31               ` Burakov, Anatoly
2018-11-06 10:37                 ` Alejandro Lucero
2018-11-06 10:48                   ` Burakov, Anatoly
2018-11-06 12:55                     ` Alejandro Lucero
2018-11-01 19:53 ` [PATCH v2 6/7] eal/mem: use DMA mask check for legacy memory Alejandro Lucero
2018-11-01 19:53 ` Alejandro Lucero [this message]
2018-11-02 18:38 ` [PATCH v2 0/7] fix DMA mask check Ferruh Yigit
2018-11-05  0:03   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101195330.19464-8-alejandro.lucero@netronome.com \
    --to=alejandro.lucero@netronome.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.