All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Benoit Parrot <bparrot@ti.com>,
	linux-media@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org
Subject: [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk
Date: Fri,  2 Nov 2018 00:31:15 +0100	[thread overview]
Message-ID: <20181101233144.31507-2-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20181101233144.31507-1-niklas.soderlund+renesas@ragnatech.se>

From: Sakari Ailus <sakari.ailus@linux.intel.com>

With the upcoming use of the recently added has_route() media entity op, all
the pads in an entity will no longer be considered interconnected. This has
an effect where the media graph is traversed: the starting pad does make a
difference.

Prepare for this change by using pad instead of the entity as an argument
for the graph walk operations. The actual graph traversal algorithm change
is in further patches.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
 Documentation/media/kapi/mc-core.rst            |  2 +-
 drivers/media/media-entity.c                    | 17 ++++++++---------
 drivers/media/platform/exynos4-is/media-dev.c   |  4 ++--
 drivers/media/platform/omap3isp/ispvideo.c      |  2 +-
 drivers/media/platform/vsp1/vsp1_video.c        |  2 +-
 drivers/media/platform/xilinx/xilinx-dma.c      |  2 +-
 drivers/media/v4l2-core/v4l2-mc.c               |  6 +++---
 drivers/staging/media/davinci_vpfe/vpfe_video.c |  6 +++---
 drivers/staging/media/omap4iss/iss_video.c      |  4 ++--
 include/media/media-entity.h                    | 10 ++++------
 10 files changed, 26 insertions(+), 29 deletions(-)

diff --git a/Documentation/media/kapi/mc-core.rst b/Documentation/media/kapi/mc-core.rst
index 0c05503eaf1fa6c7..27aefb9a778b2ad6 100644
--- a/Documentation/media/kapi/mc-core.rst
+++ b/Documentation/media/kapi/mc-core.rst
@@ -165,7 +165,7 @@ Drivers initiate a graph traversal by calling
 :c:func:`media_graph_walk_start()`
 
 The graph structure, provided by the caller, is initialized to start graph
-traversal at the given entity.
+traversal at the given pad in an entity.
 
 Drivers can then retrieve the next entity by calling
 :c:func:`media_graph_walk_next()`
diff --git a/drivers/media/media-entity.c b/drivers/media/media-entity.c
index 0b1cb3559140a1fe..2bbc07de71aa5e6d 100644
--- a/drivers/media/media-entity.c
+++ b/drivers/media/media-entity.c
@@ -300,17 +300,16 @@ void media_graph_walk_cleanup(struct media_graph *graph)
 }
 EXPORT_SYMBOL_GPL(media_graph_walk_cleanup);
 
-void media_graph_walk_start(struct media_graph *graph,
-			    struct media_entity *entity)
+void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad)
 {
 	media_entity_enum_zero(&graph->ent_enum);
-	media_entity_enum_set(&graph->ent_enum, entity);
+	media_entity_enum_set(&graph->ent_enum, pad->entity);
 
 	graph->top = 0;
 	graph->stack[graph->top].entity = NULL;
-	stack_push(graph, entity);
-	dev_dbg(entity->graph_obj.mdev->dev,
-		"begin graph walk at '%s'\n", entity->name);
+	stack_push(graph, pad->entity);
+	dev_dbg(pad->graph_obj.mdev->dev,
+		"begin graph walk at '%s':%u\n", pad->entity->name, pad->index);
 }
 EXPORT_SYMBOL_GPL(media_graph_walk_start);
 
@@ -428,7 +427,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
 			goto error_graph_walk_start;
 	}
 
-	media_graph_walk_start(&pipe->graph, entity);
+	media_graph_walk_start(&pipe->graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		DECLARE_BITMAP(active, MEDIA_ENTITY_MAX_PADS);
@@ -509,7 +508,7 @@ __must_check int __media_pipeline_start(struct media_entity *entity,
 	 * Link validation on graph failed. We revert what we did and
 	 * return the error.
 	 */
-	media_graph_walk_start(graph, entity_err);
+	media_graph_walk_start(graph, entity_err->pads);
 
 	while ((entity_err = media_graph_walk_next(graph))) {
 		/* Sanity check for negative stream_count */
@@ -560,7 +559,7 @@ void __media_pipeline_stop(struct media_entity *entity)
 	if (WARN_ON(!pipe))
 		return;
 
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		/* Sanity check for negative stream_count */
diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c
index 870501b0f351addb..51d2a571c06db6a3 100644
--- a/drivers/media/platform/exynos4-is/media-dev.c
+++ b/drivers/media/platform/exynos4-is/media-dev.c
@@ -1144,7 +1144,7 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
 	 * through active links. This is needed as we cannot power on/off the
 	 * subdevs in random order.
 	 */
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		if (!is_media_entity_v4l2_video_device(entity))
@@ -1159,7 +1159,7 @@ static int __fimc_md_modify_pipelines(struct media_entity *entity, bool enable,
 	return 0;
 
 err:
-	media_graph_walk_start(graph, entity_err);
+	media_graph_walk_start(graph, entity_err->pads);
 
 	while ((entity_err = media_graph_walk_next(graph))) {
 		if (!is_media_entity_v4l2_video_device(entity_err))
diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c
index 5658f6a326f77f66..50ad35bc644eae29 100644
--- a/drivers/media/platform/omap3isp/ispvideo.c
+++ b/drivers/media/platform/omap3isp/ispvideo.c
@@ -238,7 +238,7 @@ static int isp_video_get_graph_data(struct isp_video *video,
 		return ret;
 	}
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		struct isp_video *__video;
diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c
index 771dfe1f7c20e526..e35b2e2340b82f00 100644
--- a/drivers/media/platform/vsp1/vsp1_video.c
+++ b/drivers/media/platform/vsp1/vsp1_video.c
@@ -580,7 +580,7 @@ static int vsp1_video_pipeline_build(struct vsp1_pipeline *pipe,
 	if (ret)
 		return ret;
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		struct v4l2_subdev *subdev;
diff --git a/drivers/media/platform/xilinx/xilinx-dma.c b/drivers/media/platform/xilinx/xilinx-dma.c
index 4ae9d38c94332fa4..566c2d0fb97dc162 100644
--- a/drivers/media/platform/xilinx/xilinx-dma.c
+++ b/drivers/media/platform/xilinx/xilinx-dma.c
@@ -193,7 +193,7 @@ static int xvip_pipeline_validate(struct xvip_pipeline *pipe,
 		return ret;
 	}
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		struct xvip_dma *dma;
diff --git a/drivers/media/v4l2-core/v4l2-mc.c b/drivers/media/v4l2-core/v4l2-mc.c
index 014a2a97cadd8706..9ed480fe5b6e4762 100644
--- a/drivers/media/v4l2-core/v4l2-mc.c
+++ b/drivers/media/v4l2-core/v4l2-mc.c
@@ -341,7 +341,7 @@ static int pipeline_pm_use_count(struct media_entity *entity,
 {
 	int use = 0;
 
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(graph))) {
 		if (is_media_entity_v4l2_video_device(entity))
@@ -404,7 +404,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
 	if (!change)
 		return 0;
 
-	media_graph_walk_start(graph, entity);
+	media_graph_walk_start(graph, entity->pads);
 
 	while (!ret && (entity = media_graph_walk_next(graph)))
 		if (is_media_entity_v4l2_subdev(entity))
@@ -413,7 +413,7 @@ static int pipeline_pm_power(struct media_entity *entity, int change,
 	if (!ret)
 		return ret;
 
-	media_graph_walk_start(graph, first);
+	media_graph_walk_start(graph, first->pads);
 
 	while ((first = media_graph_walk_next(graph))
 	       && first != entity)
diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c b/drivers/staging/media/davinci_vpfe/vpfe_video.c
index 5e42490331b7620f..912d93fc7a483cd4 100644
--- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
+++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
@@ -150,7 +150,7 @@ static int vpfe_prepare_pipeline(struct vpfe_video_device *video)
 		mutex_unlock(&mdev->graph_mutex);
 		return -ENOMEM;
 	}
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 	while ((entity = media_graph_walk_next(&graph))) {
 		if (entity == &video->video_dev.entity)
 			continue;
@@ -303,7 +303,7 @@ static int vpfe_pipeline_enable(struct vpfe_pipeline *pipe)
 	ret = media_graph_walk_init(&pipe->graph, mdev);
 	if (ret)
 		goto out;
-	media_graph_walk_start(&pipe->graph, entity);
+	media_graph_walk_start(&pipe->graph, entity->pads);
 	while ((entity = media_graph_walk_next(&pipe->graph))) {
 
 		if (!is_media_entity_v4l2_subdev(entity))
@@ -345,7 +345,7 @@ static int vpfe_pipeline_disable(struct vpfe_pipeline *pipe)
 
 	mdev = entity->graph_obj.mdev;
 	mutex_lock(&mdev->graph_mutex);
-	media_graph_walk_start(&pipe->graph, entity);
+	media_graph_walk_start(&pipe->graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&pipe->graph))) {
 
diff --git a/drivers/staging/media/omap4iss/iss_video.c b/drivers/staging/media/omap4iss/iss_video.c
index c1322aeaf01eb951..6f72c02c8054f496 100644
--- a/drivers/staging/media/omap4iss/iss_video.c
+++ b/drivers/staging/media/omap4iss/iss_video.c
@@ -217,7 +217,7 @@ iss_video_far_end(struct iss_video *video)
 		return NULL;
 	}
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 
 	while ((entity = media_graph_walk_next(&graph))) {
 		if (entity == &video->video.entity)
@@ -897,7 +897,7 @@ iss_video_streamon(struct file *file, void *fh, enum v4l2_buf_type type)
 	if (ret < 0)
 		goto err_media_pipeline_start;
 
-	media_graph_walk_start(&graph, entity);
+	media_graph_walk_start(&graph, entity->pads);
 	while ((entity = media_graph_walk_next(&graph)))
 		media_entity_enum_set(&pipe->ent_enum, entity);
 
diff --git a/include/media/media-entity.h b/include/media/media-entity.h
index e5f6960d92f6cdd4..07ab141e739ef5ff 100644
--- a/include/media/media-entity.h
+++ b/include/media/media-entity.h
@@ -928,22 +928,20 @@ void media_graph_walk_cleanup(struct media_graph *graph);
 void media_entity_put(struct media_entity *entity);
 
 /**
- * media_graph_walk_start - Start walking the media graph at a
- *	given entity
+ * media_graph_walk_start - Start walking the media graph at a given pad
  *
  * @graph: Media graph structure that will be used to walk the graph
- * @entity: Starting entity
+ * @pad: Starting pad
  *
  * Before using this function, media_graph_walk_init() must be
  * used to allocate resources used for walking the graph. This
  * function initializes the graph traversal structure to walk the
- * entities graph starting at the given entity. The traversal
+ * entities graph starting at the given pad. The traversal
  * structure must not be modified by the caller during graph
  * traversal. After the graph walk, the resources must be released
  * using media_graph_walk_cleanup().
  */
-void media_graph_walk_start(struct media_graph *graph,
-			    struct media_entity *entity);
+void media_graph_walk_start(struct media_graph *graph, struct media_pad *pad);
 
 /**
  * media_graph_walk_next - Get the next entity in the graph
-- 
2.19.1

  reply	other threads:[~2018-11-02  8:37 UTC|newest]

Thread overview: 93+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-11-01 23:31 [PATCH v2 00/30] v4l: add support for multiplexed streams Niklas Söderlund
2018-11-01 23:31 ` Niklas Söderlund [this message]
2019-01-15 21:43   ` [PATCH v2 01/30] media: entity: Use pad as a starting point for graph walk Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 02/30] media: entity: Use pads instead of entities in the media graph walk stack Niklas Söderlund
2019-01-15 22:03   ` Laurent Pinchart
2019-01-15 22:13     ` Sakari Ailus
2019-01-15 22:07   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 03/30] media: entity: Walk the graph based on pads Niklas Söderlund
2019-01-15 22:21   ` Laurent Pinchart
     [not found]     ` <20190115223406.mxgzl36cp54gb7nv@kekkonen.localdomain>
2019-01-15 23:28       ` Laurent Pinchart
2019-01-22 14:50         ` Sakari Ailus
2019-02-14 15:15   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 04/30] v4l: mc: Start walk from a specific pad in use count calculation Niklas Söderlund
2019-01-15 22:24   ` Laurent Pinchart
2019-01-15 22:36     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 05/30] media: entity: Move the pipeline from entity to pads Niklas Söderlund
2019-01-15 22:38   ` Laurent Pinchart
2019-01-15 22:48     ` Sakari Ailus
2019-02-14 15:53   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 06/30] media: entity: Use pad as the starting point for a pipeline Niklas Söderlund
2019-01-15 22:54   ` Laurent Pinchart
2019-01-22 15:31     ` Sakari Ailus
2019-01-22 15:37       ` Laurent Pinchart
2019-01-22 16:16         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 07/30] media: entity: Add has_route entity operation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 08/30] media: entity: Add media_has_route() function Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 09/30] media: entity: Swap pads if route is checked from source to sink Niklas Söderlund
2019-01-15 22:57   ` Laurent Pinchart
2019-01-22 15:15     ` Sakari Ailus
2019-01-22 15:20       ` Laurent Pinchart
2019-02-18  9:21         ` Jacopo Mondi
2019-02-22 12:18           ` Laurent Pinchart
2019-03-04 12:35             ` Jacopo Mondi
2019-03-05 20:04               ` Laurent Pinchart
2019-03-06  8:29                 ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 10/30] media: entity: Use routing information during graph traversal Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 11/30] media: entity: Skip link validation for pads to which there is no route to Niklas Söderlund
2019-01-15 23:13   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 12/30] media: entity: Add an iterator helper for connected pads Niklas Söderlund
2019-01-15 23:24   ` Laurent Pinchart
2019-01-22 15:36     ` Sakari Ailus
2019-01-22 15:38       ` Laurent Pinchart
2019-01-22 16:21         ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 13/30] media: entity: Add only connected pads to the pipeline Niklas Söderlund
2019-01-15 23:33   ` Laurent Pinchart
2018-11-01 23:31 ` [PATCH v2 14/30] media: entity: Add debug information in graph walk route check Niklas Söderlund
2019-01-15 23:35   ` Laurent Pinchart
2019-01-22 15:38     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 15/30] media: entity: Look for indirect routes Niklas Söderlund
2019-01-15 23:41   ` Laurent Pinchart
2019-01-22 15:56     ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 16/30] v4l: subdev: Add [GS]_ROUTING subdev ioctls and operations Niklas Söderlund
2019-01-15 23:51   ` Laurent Pinchart
2019-01-22 16:14     ` Sakari Ailus
2019-01-22 17:00       ` Laurent Pinchart
2019-02-21 14:59     ` Jacopo Mondi
2019-02-21 23:49       ` Sakari Ailus
2019-02-22  8:46         ` Jacopo Mondi
2019-02-21 14:39   ` Jacopo Mondi
2019-02-21 22:31     ` Sakari Ailus
2019-02-22  8:40       ` Jacopo Mondi
2019-02-22 11:04         ` Sakari Ailus
2019-02-22 11:17           ` Jacopo Mondi
2019-02-22 11:29             ` Sakari Ailus
2019-02-22 13:37               ` Ian Arkver
2019-02-22 13:50               ` Geert Uytterhoeven
2018-11-01 23:31 ` [PATCH v2 17/30] v4l: subdev: compat: Implement handling for VIDIOC_SUBDEV_[GS]_ROUTING Niklas Söderlund
2019-01-08 10:04   ` Geert Uytterhoeven
2019-01-15 23:53   ` Laurent Pinchart
2019-01-22 15:57     ` Sakari Ailus
2019-02-18 11:21     ` Jacopo Mondi
2019-02-21 23:50       ` Sakari Ailus
2018-11-01 23:31 ` [PATCH v2 18/30] v4l: subdev: Take routing information into account in link validation Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 19/30] v4l: subdev: Improve link format validation debug messages Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 20/30] v4l: mc: Add an S_ROUTING helper function for power state changes Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 21/30] v4l: Add bus type to frame descriptors Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 22/30] v4l: Add CSI-2 bus configuration " Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 23/30] v4l: Add stream to frame descriptor Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 24/30] adv748x: csi2: add translation from pixelcode to CSI-2 datatype Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 25/30] adv748x: csi2: only allow formats on sink pads Niklas Söderlund
2019-02-21 14:18   ` Jacopo Mondi
2018-11-01 23:31 ` [PATCH v2 26/30] adv748x: csi2: describe the multiplexed stream Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 27/30] adv748x: csi2: add internal routing configuration Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 28/30] adv748x: afe: add routing support Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 29/30] rcar-csi2: use frame description information to configure CSI-2 bus Niklas Söderlund
2018-11-01 23:31 ` [PATCH v2 30/30] rcar-csi2: expose the subdevice internal routing Niklas Söderlund
2018-11-14 13:10   ` Nikita Yushchenko
2018-11-14 19:45     ` Niklas Söderlund
2018-11-14 19:45       ` Niklas Söderlund
2018-12-03 22:16 ` [PATCH v2 00/30] v4l: add support for multiplexed streams Sakari Ailus
2018-12-03 22:16   ` Sakari Ailus
2018-12-05 22:09   ` Niklas Söderlund
2018-12-05 22:09     ` Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181101233144.31507-2-niklas.soderlund+renesas@ragnatech.se \
    --to=niklas.soderlund+renesas@ragnatech.se \
    --cc=bparrot@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.