From: Rajesh Bhagat <rajesh.bhagat@nxp.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v6 27/27] armv8: ls1012afrx: Add TFABOOT support
Date: Mon, 5 Nov 2018 18:03:08 +0000 [thread overview]
Message-ID: <20181105181931.7348-28-rajesh.bhagat@nxp.com> (raw)
In-Reply-To: <20181105181931.7348-1-rajesh.bhagat@nxp.com>
TFABOOT support includes:
- ls1012a2g5rdb/ls1012afrdm/ls1012afrwy_tfa_defconfig to be
loaded by trusted firmware
- define BOOTCOMMAND for TFABOOT
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
---
Change in v6:
- Rebased to master
Change in v5: None
board/freescale/ls1012afrdm/MAINTAINERS | 3 ++
board/freescale/ls1012afrdm/ls1012afrdm.c | 29 +++++++++-
configs/ls1012a2g5rdb_tfa_defconfig | 50 +++++++++++++++++
configs/ls1012afrdm_tfa_defconfig | 50 +++++++++++++++++
configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig | 53 +++++++++++++++++++
configs/ls1012afrwy_tfa_defconfig | 51 ++++++++++++++++++
include/configs/ls1012a2g5rdb.h | 6 +++
include/configs/ls1012afrdm.h | 5 ++
include/configs/ls1012afrwy.h | 6 +++
9 files changed, 252 insertions(+), 1 deletion(-)
create mode 100644 configs/ls1012a2g5rdb_tfa_defconfig
create mode 100644 configs/ls1012afrdm_tfa_defconfig
create mode 100644 configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
create mode 100644 configs/ls1012afrwy_tfa_defconfig
diff --git a/board/freescale/ls1012afrdm/MAINTAINERS b/board/freescale/ls1012afrdm/MAINTAINERS
index f3fcdb87ae..5ef4ae8fe9 100644
--- a/board/freescale/ls1012afrdm/MAINTAINERS
+++ b/board/freescale/ls1012afrdm/MAINTAINERS
@@ -1,9 +1,12 @@
LS1012AFRDM BOARD
M: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+M: Rajesh Bhagat <rajesh.bhagat@nxp.com>
S: Maintained
F: board/freescale/ls1012afrdm/
F: include/configs/ls1012afrdm.h
F: configs/ls1012afrdm_qspi_defconfig
+F: configs/ls1012afrdm_tfa_defconfig
+F: configs/ls1012afrwy_tfa_defconfig
LS1012AFRWY BOARD
M: Bhaskar Upadhaya <bhaskar.upadhaya@nxp.com>
diff --git a/board/freescale/ls1012afrdm/ls1012afrdm.c b/board/freescale/ls1012afrdm/ls1012afrdm.c
index 5db1027717..b4ff23d058 100644
--- a/board/freescale/ls1012afrdm/ls1012afrdm.c
+++ b/board/freescale/ls1012afrdm/ls1012afrdm.c
@@ -80,6 +80,31 @@ int esdhc_status_fixup(void *blob, const char *compat)
}
#endif
+#ifdef CONFIG_TFABOOT
+int dram_init(void)
+{
+#ifdef CONFIG_TARGET_LS1012AFRWY
+ int board_rev;
+#endif
+
+ gd->ram_size = tfa_get_dram_size();
+
+ if (!gd->ram_size) {
+#ifdef CONFIG_TARGET_LS1012AFRWY
+ board_rev = get_board_version();
+
+ if (board_rev & BOARD_REV_C) {
+ gd->ram_size = SYS_SDRAM_SIZE_1024;
+ } else {
+ gd->ram_size = SYS_SDRAM_SIZE_512;
+ }
+#else
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+#endif
+ }
+ return 0;
+}
+#else
int dram_init(void)
{
#ifdef CONFIG_TARGET_LS1012AFRWY
@@ -122,6 +147,7 @@ int dram_init(void)
return 0;
}
+#endif
int board_early_init_f(void)
{
@@ -139,7 +165,8 @@ int board_init(void)
* Set CCI-400 control override register to enable barrier
* transaction
*/
- out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
+ if (current_el() == 3)
+ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER);
#ifdef CONFIG_ENV_IS_NOWHERE
gd->env_addr = (ulong)&default_environment[0];
diff --git a/configs/ls1012a2g5rdb_tfa_defconfig b/configs/ls1012a2g5rdb_tfa_defconfig
new file mode 100644
index 0000000000..3987eb4d91
--- /dev/null
+++ b/configs/ls1012a2g5rdb_tfa_defconfig
@@ -0,0 +1,50 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012A2G5RDB=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-2g5rdb"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SATA_CEVA=y
+CONFIG_DM_MMC=y
+CONFIG_FSL_ESDHC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_DM_SCSI=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ls1012afrdm_tfa_defconfig b/configs/ls1012afrdm_tfa_defconfig
new file mode 100644
index 0000000000..703f9cb99e
--- /dev/null
+++ b/configs/ls1012afrdm_tfa_defconfig
@@ -0,0 +1,50 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRDM=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_QSPI_AHB_INIT=y
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frdm"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_MMC is not set
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
new file mode 100644
index 0000000000..0c6f474066
--- /dev/null
+++ b/configs/ls1012afrwy_tfa_SECURE_BOOT_defconfig
@@ -0,0 +1,53 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_SECURE_BOOT=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
+CONFIG_RSA=y
+CONFIG_RSA_SOFTWARE_EXP=y
diff --git a/configs/ls1012afrwy_tfa_defconfig b/configs/ls1012afrwy_tfa_defconfig
new file mode 100644
index 0000000000..2d6002c6e5
--- /dev/null
+++ b/configs/ls1012afrwy_tfa_defconfig
@@ -0,0 +1,51 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1012AFRWY=y
+CONFIG_SYS_TEXT_BASE=0x82000000
+CONFIG_TFABOOT=y
+CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT=y
+CONFIG_SEC_FIRMWARE_ARMV8_PSCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_NR_DRAM_BANKS=2
+# CONFIG_SYS_MALLOC_F is not set
+CONFIG_FIT_VERBOSE=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_OF_STDOUT_VIA_ALIAS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 earlycon=uart8250,mmio,0x21c0500 quiet lpj=250000"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_CMD_GREPENV=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SF=y
+CONFIG_CMD_USB=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_CACHE=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1012a-frwy"
+CONFIG_ENV_IS_IN_SPI_FLASH=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+# CONFIG_BLK is not set
+CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_FSL_PFE=y
+CONFIG_DM_ETH=y
+CONFIG_E1000=y
+CONFIG_PCI=y
+CONFIG_DM_PCI=y
+CONFIG_DM_PCI_COMPAT=y
+CONFIG_PCIE_LAYERSCAPE=y
+CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_STORAGE=y
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index 71e4a8b427..cb329385d9 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -93,10 +93,16 @@
"bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
+ "env exists secureboot && esbc_halt;"
+#else
#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd; run qspi_bootcmd; " \
"env exists secureboot && esbc_halt;"
#endif
+#endif
#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
#define DEFAULT_PFE_MDIO1_NAME "PFE_MDIO1"
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 7affabfdba..8c7d4e558d 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -65,7 +65,12 @@
"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
+#else
#define CONFIG_BOOTCOMMAND "pfe stop;run distro_bootcmd;run qspi_bootcmd"
+#endif
#define CONFIG_CMD_MEMINFO
#define CONFIG_SYS_MEMTEST_START 0x80000000
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index e450002e83..ebb1df41c7 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -119,8 +119,14 @@
"bootm $load_addr#$board\0"
#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_TFABOOT
+#undef QSPI_NOR_BOOTCOMMAND
+#define QSPI_NOR_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
+ "env exists secureboot && esbc_halt;"
+#else
#define CONFIG_BOOTCOMMAND "pfe stop; run distro_bootcmd; run sd_bootcmd; "\
"env exists secureboot && esbc_halt;"
+#endif
#define CONFIG_CMD_MEMINFO
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
--
2.17.1
next prev parent reply other threads:[~2018-11-05 18:03 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-05 18:01 [U-Boot] [PATCH v6 00/27] TF-A Boot support for NXP Chassis 2 platforms Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 01/27] move data structure out of cpu.h Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 02/27] env: allow flash and nand env driver to compile together Rajesh Bhagat
2018-12-03 18:14 ` York Sun
2018-11-05 18:01 ` [U-Boot] [PATCH v6 03/27] env: sf: define API to override sf environment address Rajesh Bhagat
2018-12-03 18:16 ` York Sun
2018-11-05 18:01 ` [U-Boot] [PATCH v6 04/27] driver/ifc: replace __ilog2 with LOG2 macro Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 05/27] armv8: layerscape: Enable routing SError exception Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 06/27] armv8: fsl-layerscape: change tlb base from OCRAM to DDR in EL < 3 Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 07/27] drivers: ifc: dynamic chipselect mapping support Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 08/27] armv8: layerscape: Add TFABOOT support Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 09/27] armv8: fsl-layerscape: identify boot source from PORSR register Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 10/27] armv8: layerscape: remove EL3 specific erratas for TFABOOT Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 11/27] armv8: fsl-layerscape: bootcmd identification " Rajesh Bhagat
2018-11-05 18:01 ` [U-Boot] [PATCH v6 12/27] armv8: layerscape: add SMC calls for DDR size and bank info Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 13/27] armv8: layerscape: skip OCRAM init for TFABOOT Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 14/27] armv8: fsl-layerscape: Update parsing boot source Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 15/27] armv8: sec_firmware: change el2_to_aarch32 SMC ID Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 16/27] armv8: sec_firmware: return job ring status as true in TFABOOT Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 17/27] net: fm: add TFABOOT support Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 18/27] drivers: qe: " Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 19/27] armv8: fsl-layerscape: add support of MC framework for TFA Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 20/27] armv8: ls1046ardb: Add TFABOOT support Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 21/27] armv8: ls1046aqds: " Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 22/27] armv8: ls1043ardb: " Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 23/27] armv8: ls1043aqds: " Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 24/27] armv8: ls1012ardb: " Rajesh Bhagat
2018-11-05 18:02 ` [U-Boot] [PATCH v6 25/27] armv8: ls1012aqds: fix secure boot compilation Rajesh Bhagat
2018-11-05 18:03 ` [U-Boot] [PATCH v6 26/27] armv8: ls1012aqds: Add TFABOOT support Rajesh Bhagat
2018-11-05 18:03 ` Rajesh Bhagat [this message]
2018-11-19 20:13 ` [U-Boot] [PATCH v6 00/27] TF-A Boot support for NXP Chassis 2 platforms York Sun
2018-12-10 21:05 ` York Sun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181105181931.7348-28-rajesh.bhagat@nxp.com \
--to=rajesh.bhagat@nxp.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.